| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include "cpu.h" |
| #include "exec-all.h" |
| #include "gdbstub.h" |
| |
| static uint32_t cortexa8_cp15_c0_c1[8] = |
| { 0x1031, 0x11, 0x400, 0, 0x31100003, 0x20000000, 0x01202000, 0x11 }; |
| |
| static uint32_t cortexa8_cp15_c0_c2[8] = |
| { 0x00101111, 0x12112111, 0x21232031, 0x11112131, 0x00111142, 0, 0, 0 }; |
| |
| static uint32_t mpcore_cp15_c0_c1[8] = |
| { 0x111, 0x1, 0, 0x2, 0x01100103, 0x10020302, 0x01222000, 0 }; |
| |
| static uint32_t mpcore_cp15_c0_c2[8] = |
| { 0x00100011, 0x12002111, 0x11221011, 0x01102131, 0x141, 0, 0, 0 }; |
| |
| static uint32_t arm1136_cp15_c0_c1[8] = |
| { 0x111, 0x1, 0x2, 0x3, 0x01130003, 0x10030302, 0x01222110, 0 }; |
| |
| static uint32_t arm1136_cp15_c0_c2[8] = |
| { 0x00140011, 0x12002111, 0x11231111, 0x01102131, 0x141, 0, 0, 0 }; |
| |
| static uint32_t cpu_arm_find_by_name(const char *name); |
| |
| static inline void set_feature(CPUARMState *env, int feature) |
| { |
| env->features |= 1u << feature; |
| } |
| |
| static void cpu_reset_model_id(CPUARMState *env, uint32_t id) |
| { |
| env->cp15.c0_cpuid = id; |
| switch (id) { |
| case ARM_CPUID_ARM926: |
| set_feature(env, ARM_FEATURE_VFP); |
| env->vfp.xregs[ARM_VFP_FPSID] = 0x41011090; |
| env->cp15.c0_cachetype = 0x1dd20d2; |
| env->cp15.c1_sys = 0x00090078; |
| break; |
| case ARM_CPUID_ARM946: |
| set_feature(env, ARM_FEATURE_MPU); |
| env->cp15.c0_cachetype = 0x0f004006; |
| env->cp15.c1_sys = 0x00000078; |
| break; |
| case ARM_CPUID_ARM1026: |
| set_feature(env, ARM_FEATURE_VFP); |
| set_feature(env, ARM_FEATURE_AUXCR); |
| env->vfp.xregs[ARM_VFP_FPSID] = 0x410110a0; |
| env->cp15.c0_cachetype = 0x1dd20d2; |
| env->cp15.c1_sys = 0x00090078; |
| break; |
| case ARM_CPUID_ARM1136: |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_VFP); |
| set_feature(env, ARM_FEATURE_AUXCR); |
| env->vfp.xregs[ARM_VFP_FPSID] = 0x410120b4; |
| env->vfp.xregs[ARM_VFP_MVFR0] = 0x11111111; |
| env->vfp.xregs[ARM_VFP_MVFR1] = 0x00000000; |
| memcpy(env->cp15.c0_c1, arm1136_cp15_c0_c1, 8 * sizeof(uint32_t)); |
| memcpy(env->cp15.c0_c1, arm1136_cp15_c0_c2, 8 * sizeof(uint32_t)); |
| env->cp15.c0_cachetype = 0x1dd20d2; |
| break; |
| case ARM_CPUID_ARM11MPCORE: |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_V6K); |
| set_feature(env, ARM_FEATURE_VFP); |
| set_feature(env, ARM_FEATURE_AUXCR); |
| env->vfp.xregs[ARM_VFP_FPSID] = 0x410120b4; |
| env->vfp.xregs[ARM_VFP_MVFR0] = 0x11111111; |
| env->vfp.xregs[ARM_VFP_MVFR1] = 0x00000000; |
| memcpy(env->cp15.c0_c1, mpcore_cp15_c0_c1, 8 * sizeof(uint32_t)); |
| memcpy(env->cp15.c0_c1, mpcore_cp15_c0_c2, 8 * sizeof(uint32_t)); |
| env->cp15.c0_cachetype = 0x1dd20d2; |
| break; |
| case ARM_CPUID_CORTEXA8: |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_V6K); |
| set_feature(env, ARM_FEATURE_V7); |
| set_feature(env, ARM_FEATURE_AUXCR); |
| set_feature(env, ARM_FEATURE_THUMB2); |
| set_feature(env, ARM_FEATURE_VFP); |
| set_feature(env, ARM_FEATURE_VFP3); |
| set_feature(env, ARM_FEATURE_NEON); |
| env->vfp.xregs[ARM_VFP_FPSID] = 0x410330c0; |
| env->vfp.xregs[ARM_VFP_MVFR0] = 0x11110222; |
| env->vfp.xregs[ARM_VFP_MVFR1] = 0x00011100; |
| memcpy(env->cp15.c0_c1, cortexa8_cp15_c0_c1, 8 * sizeof(uint32_t)); |
| memcpy(env->cp15.c0_c1, cortexa8_cp15_c0_c2, 8 * sizeof(uint32_t)); |
| env->cp15.c0_cachetype = 0x1dd20d2; |
| break; |
| case ARM_CPUID_CORTEXM3: |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_THUMB2); |
| set_feature(env, ARM_FEATURE_V7); |
| set_feature(env, ARM_FEATURE_M); |
| set_feature(env, ARM_FEATURE_DIV); |
| break; |
| case ARM_CPUID_ANY: /* For userspace emulation. */ |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_V6K); |
| set_feature(env, ARM_FEATURE_V7); |
| set_feature(env, ARM_FEATURE_THUMB2); |
| set_feature(env, ARM_FEATURE_VFP); |
| set_feature(env, ARM_FEATURE_VFP3); |
| set_feature(env, ARM_FEATURE_NEON); |
| set_feature(env, ARM_FEATURE_DIV); |
| break; |
| case ARM_CPUID_TI915T: |
| case ARM_CPUID_TI925T: |
| set_feature(env, ARM_FEATURE_OMAPCP); |
| env->cp15.c0_cpuid = ARM_CPUID_TI925T; /* Depends on wiring. */ |
| env->cp15.c0_cachetype = 0x5109149; |
| env->cp15.c1_sys = 0x00000070; |
| env->cp15.c15_i_max = 0x000; |
| env->cp15.c15_i_min = 0xff0; |
| break; |
| case ARM_CPUID_PXA250: |
| case ARM_CPUID_PXA255: |
| case ARM_CPUID_PXA260: |
| case ARM_CPUID_PXA261: |
| case ARM_CPUID_PXA262: |
| set_feature(env, ARM_FEATURE_XSCALE); |
| /* JTAG_ID is ((id << 28) | 0x09265013) */ |
| env->cp15.c0_cachetype = 0xd172172; |
| env->cp15.c1_sys = 0x00000078; |
| break; |
| case ARM_CPUID_PXA270_A0: |
| case ARM_CPUID_PXA270_A1: |
| case ARM_CPUID_PXA270_B0: |
| case ARM_CPUID_PXA270_B1: |
| case ARM_CPUID_PXA270_C0: |
| case ARM_CPUID_PXA270_C5: |
| set_feature(env, ARM_FEATURE_XSCALE); |
| /* JTAG_ID is ((id << 28) | 0x09265013) */ |
| set_feature(env, ARM_FEATURE_IWMMXT); |
| env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q'; |
| env->cp15.c0_cachetype = 0xd172172; |
| env->cp15.c1_sys = 0x00000078; |
| break; |
| default: |
| cpu_abort(env, "Bad CPU ID: %x\n", id); |
| break; |
| } |
| } |
| |
| void cpu_reset(CPUARMState *env) |
| { |
| uint32_t id; |
| id = env->cp15.c0_cpuid; |
| memset(env, 0, offsetof(CPUARMState, breakpoints)); |
| if (id) |
| cpu_reset_model_id(env, id); |
| #if defined (CONFIG_USER_ONLY) |
| env->uncached_cpsr = ARM_CPU_MODE_USR; |
| env->vfp.xregs[ARM_VFP_FPEXC] = 1 << 30; |
| #else |
| /* SVC mode with interrupts disabled. */ |
| env->uncached_cpsr = ARM_CPU_MODE_SVC | CPSR_A | CPSR_F | CPSR_I; |
| /* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is |
| clear at reset. */ |
| if (IS_M(env)) |
| env->uncached_cpsr &= ~CPSR_I; |
| env->vfp.xregs[ARM_VFP_FPEXC] = 0; |
| #endif |
| env->regs[15] = 0; |
| tlb_flush(env, 1); |
| } |
| |
| CPUARMState *cpu_arm_init(const char *cpu_model) |
| { |
| CPUARMState *env; |
| uint32_t id; |
| |
| id = cpu_arm_find_by_name(cpu_model); |
| if (id == 0) |
| return NULL; |
| env = qemu_mallocz(sizeof(CPUARMState)); |
| if (!env) |
| return NULL; |
| cpu_exec_init(env); |
| env->cp15.c0_cpuid = id; |
| cpu_reset(env); |
| return env; |
| } |
| |
| struct arm_cpu_t { |
| uint32_t id; |
| const char *name; |
| }; |
| |
| static const struct arm_cpu_t arm_cpu_names[] = { |
| { ARM_CPUID_ARM926, "arm926"}, |
| { ARM_CPUID_ARM946, "arm946"}, |
| { ARM_CPUID_ARM1026, "arm1026"}, |
| { ARM_CPUID_ARM1136, "arm1136"}, |
| { ARM_CPUID_ARM11MPCORE, "arm11mpcore"}, |
| { ARM_CPUID_CORTEXM3, "cortex-m3"}, |
| { ARM_CPUID_CORTEXA8, "cortex-a8"}, |
| { ARM_CPUID_TI925T, "ti925t" }, |
| { ARM_CPUID_PXA250, "pxa250" }, |
| { ARM_CPUID_PXA255, "pxa255" }, |
| { ARM_CPUID_PXA260, "pxa260" }, |
| { ARM_CPUID_PXA261, "pxa261" }, |
| { ARM_CPUID_PXA262, "pxa262" }, |
| { ARM_CPUID_PXA270, "pxa270" }, |
| { ARM_CPUID_PXA270_A0, "pxa270-a0" }, |
| { ARM_CPUID_PXA270_A1, "pxa270-a1" }, |
| { ARM_CPUID_PXA270_B0, "pxa270-b0" }, |
| { ARM_CPUID_PXA270_B1, "pxa270-b1" }, |
| { ARM_CPUID_PXA270_C0, "pxa270-c0" }, |
| { ARM_CPUID_PXA270_C5, "pxa270-c5" }, |
| { ARM_CPUID_ANY, "any"}, |
| { 0, NULL} |
| }; |
| |
| void arm_cpu_list(FILE *f, int (*cpu_fprintf)(FILE *f, const char *fmt, ...)) |
| { |
| int i; |
| |
| (*cpu_fprintf)(f, "Available CPUs:\n"); |
| for (i = 0; arm_cpu_names[i].name; i++) { |
| (*cpu_fprintf)(f, " %s\n", arm_cpu_names[i].name); |
| } |
| } |
| |
| /* return 0 if not found */ |
| static uint32_t cpu_arm_find_by_name(const char *name) |
| { |
| int i; |
| uint32_t id; |
| |
| id = 0; |
| for (i = 0; arm_cpu_names[i].name; i++) { |
| if (strcmp(name, arm_cpu_names[i].name) == 0) { |
| id = arm_cpu_names[i].id; |
| break; |
| } |
| } |
| return id; |
| } |
| |
| void cpu_arm_close(CPUARMState *env) |
| { |
| free(env); |
| } |
| |
| /* Polynomial multiplication is like integer multiplcation except the |
| partial products are XORed, not added. */ |
| uint32_t helper_neon_mul_p8(uint32_t op1, uint32_t op2) |
| { |
| uint32_t mask; |
| uint32_t result; |
| result = 0; |
| while (op1) { |
| mask = 0; |
| if (op1 & 1) |
| mask |= 0xff; |
| if (op1 & (1 << 8)) |
| mask |= (0xff << 8); |
| if (op1 & (1 << 16)) |
| mask |= (0xff << 16); |
| if (op1 & (1 << 24)) |
| mask |= (0xff << 24); |
| result ^= op2 & mask; |
| op1 = (op1 >> 1) & 0x7f7f7f7f; |
| op2 = (op2 << 1) & 0xfefefefe; |
| } |
| return result; |
| } |
| |
| uint32_t cpsr_read(CPUARMState *env) |
| { |
| int ZF; |
| ZF = (env->NZF == 0); |
| return env->uncached_cpsr | (env->NZF & 0x80000000) | (ZF << 30) | |
| (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) |
| | (env->thumb << 5) | ((env->condexec_bits & 3) << 25) |
| | ((env->condexec_bits & 0xfc) << 8) |
| | (env->GE << 16); |
| } |
| |
| void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) |
| { |
| /* NOTE: N = 1 and Z = 1 cannot be stored currently */ |
| if (mask & CPSR_NZCV) { |
| env->NZF = (val & 0xc0000000) ^ 0x40000000; |
| env->CF = (val >> 29) & 1; |
| env->VF = (val << 3) & 0x80000000; |
| } |
| if (mask & CPSR_Q) |
| env->QF = ((val & CPSR_Q) != 0); |
| if (mask & CPSR_T) |
| env->thumb = ((val & CPSR_T) != 0); |
| if (mask & CPSR_IT_0_1) { |
| env->condexec_bits &= ~3; |
| env->condexec_bits |= (val >> 25) & 3; |
| } |
| if (mask & CPSR_IT_2_7) { |
| env->condexec_bits &= 3; |
| env->condexec_bits |= (val >> 8) & 0xfc; |
| } |
| if (mask & CPSR_GE) { |
| env->GE = (val >> 16) & 0xf; |
| } |
| |
| if ((env->uncached_cpsr ^ val) & mask & CPSR_M) { |
| switch_mode(env, val & CPSR_M); |
| } |
| mask &= ~CACHED_CPSR_BITS; |
| env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask); |
| } |
| |
| #if defined(CONFIG_USER_ONLY) |
| |
| void do_interrupt (CPUState *env) |
| { |
| env->exception_index = -1; |
| } |
| |
| /* Structure used to record exclusive memory locations. */ |
| typedef struct mmon_state { |
| struct mmon_state *next; |
| CPUARMState *cpu_env; |
| uint32_t addr; |
| } mmon_state; |
| |
| /* Chain of current locks. */ |
| static mmon_state* mmon_head = NULL; |
| |
| int cpu_arm_handle_mmu_fault (CPUState *env, target_ulong address, int rw, |
| int mmu_idx, int is_softmmu) |
| { |
| if (rw == 2) { |
| env->exception_index = EXCP_PREFETCH_ABORT; |
| env->cp15.c6_insn = address; |
| } else { |
| env->exception_index = EXCP_DATA_ABORT; |
| env->cp15.c6_data = address; |
| } |
| return 1; |
| } |
| |
| static void allocate_mmon_state(CPUState *env) |
| { |
| env->mmon_entry = malloc(sizeof (mmon_state)); |
| if (!env->mmon_entry) |
| abort(); |
| memset (env->mmon_entry, 0, sizeof (mmon_state)); |
| env->mmon_entry->cpu_env = env; |
| mmon_head = env->mmon_entry; |
| } |
| |
| /* Flush any monitor locks for the specified address. */ |
| static void flush_mmon(uint32_t addr) |
| { |
| mmon_state *mon; |
| |
| for (mon = mmon_head; mon; mon = mon->next) |
| { |
| if (mon->addr != addr) |
| continue; |
| |
| mon->addr = 0; |
| break; |
| } |
| } |
| |
| /* Mark an address for exclusive access. */ |
| void helper_mark_exclusive(CPUState *env, uint32_t addr) |
| { |
| if (!env->mmon_entry) |
| allocate_mmon_state(env); |
| /* Clear any previous locks. */ |
| flush_mmon(addr); |
| env->mmon_entry->addr = addr; |
| } |
| |
| /* Test if an exclusive address is still exclusive. Returns zero |
| if the address is still exclusive. */ |
| int helper_test_exclusive(CPUState *env, uint32_t addr) |
| { |
| int res; |
| |
| if (!env->mmon_entry) |
| return 1; |
| if (env->mmon_entry->addr == addr) |
| res = 0; |
| else |
| res = 1; |
| flush_mmon(addr); |
| return res; |
| } |
| |
| void helper_clrex(CPUState *env) |
| { |
| if (!(env->mmon_entry && env->mmon_entry->addr)) |
| return; |
| flush_mmon(env->mmon_entry->addr); |
| } |
| |
| target_phys_addr_t cpu_get_phys_page_debug(CPUState *env, target_ulong addr) |
| { |
| return addr; |
| } |
| |
| /* These should probably raise undefined insn exceptions. */ |
| void helper_set_cp(CPUState *env, uint32_t insn, uint32_t val) |
| { |
| int op1 = (insn >> 8) & 0xf; |
| cpu_abort(env, "cp%i insn %08x\n", op1, insn); |
| return; |
| } |
| |
| uint32_t helper_get_cp(CPUState *env, uint32_t insn) |
| { |
| int op1 = (insn >> 8) & 0xf; |
| cpu_abort(env, "cp%i insn %08x\n", op1, insn); |
| return 0; |
| } |
| |
| void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val) |
| { |
| cpu_abort(env, "cp15 insn %08x\n", insn); |
| } |
| |
| uint32_t helper_get_cp15(CPUState *env, uint32_t insn) |
| { |
| cpu_abort(env, "cp15 insn %08x\n", insn); |
| return 0; |
| } |
| |
| /* These should probably raise undefined insn exceptions. */ |
| void helper_v7m_msr(CPUState *env, int reg, uint32_t val) |
| { |
| cpu_abort(env, "v7m_mrs %d\n", reg); |
| } |
| |
| uint32_t helper_v7m_mrs(CPUState *env, int reg) |
| { |
| cpu_abort(env, "v7m_mrs %d\n", reg); |
| return 0; |
| } |
| |
| void switch_mode(CPUState *env, int mode) |
| { |
| if (mode != ARM_CPU_MODE_USR) |
| cpu_abort(env, "Tried to switch out of user mode\n"); |
| } |
| |
| void helper_set_r13_banked(CPUState *env, int mode, uint32_t val) |
| { |
| cpu_abort(env, "banked r13 write\n"); |
| } |
| |
| uint32_t helper_get_r13_banked(CPUState *env, int mode) |
| { |
| cpu_abort(env, "banked r13 read\n"); |
| return 0; |
| } |
| |
| #else |
| |
| extern int semihosting_enabled; |
| |
| /* Map CPU modes onto saved register banks. */ |
| static inline int bank_number (int mode) |
| { |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| case ARM_CPU_MODE_SYS: |
| return 0; |
| case ARM_CPU_MODE_SVC: |
| return 1; |
| case ARM_CPU_MODE_ABT: |
| return 2; |
| case ARM_CPU_MODE_UND: |
| return 3; |
| case ARM_CPU_MODE_IRQ: |
| return 4; |
| case ARM_CPU_MODE_FIQ: |
| return 5; |
| } |
| cpu_abort(cpu_single_env, "Bad mode %x\n", mode); |
| return -1; |
| } |
| |
| void switch_mode(CPUState *env, int mode) |
| { |
| int old_mode; |
| int i; |
| |
| old_mode = env->uncached_cpsr & CPSR_M; |
| if (mode == old_mode) |
| return; |
| |
| if (old_mode == ARM_CPU_MODE_FIQ) { |
| memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); |
| memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); |
| } else if (mode == ARM_CPU_MODE_FIQ) { |
| memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); |
| memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); |
| } |
| |
| i = bank_number(old_mode); |
| env->banked_r13[i] = env->regs[13]; |
| env->banked_r14[i] = env->regs[14]; |
| env->banked_spsr[i] = env->spsr; |
| |
| i = bank_number(mode); |
| env->regs[13] = env->banked_r13[i]; |
| env->regs[14] = env->banked_r14[i]; |
| env->spsr = env->banked_spsr[i]; |
| } |
| |
| static void v7m_push(CPUARMState *env, uint32_t val) |
| { |
| env->regs[13] -= 4; |
| stl_phys(env->regs[13], val); |
| } |
| |
| static uint32_t v7m_pop(CPUARMState *env) |
| { |
| uint32_t val; |
| val = ldl_phys(env->regs[13]); |
| env->regs[13] += 4; |
| return val; |
| } |
| |
| /* Switch to V7M main or process stack pointer. */ |
| static void switch_v7m_sp(CPUARMState *env, int process) |
| { |
| uint32_t tmp; |
| if (env->v7m.current_sp != process) { |
| tmp = env->v7m.other_sp; |
| env->v7m.other_sp = env->regs[13]; |
| env->regs[13] = tmp; |
| env->v7m.current_sp = process; |
| } |
| } |
| |
| static void do_v7m_exception_exit(CPUARMState *env) |
| { |
| uint32_t type; |
| uint32_t xpsr; |
| |
| type = env->regs[15]; |
| if (env->v7m.exception != 0) |
| armv7m_nvic_complete_irq(env->v7m.nvic, env->v7m.exception); |
| |
| /* Switch to the target stack. */ |
| switch_v7m_sp(env, (type & 4) != 0); |
| /* Pop registers. */ |
| env->regs[0] = v7m_pop(env); |
| env->regs[1] = v7m_pop(env); |
| env->regs[2] = v7m_pop(env); |
| env->regs[3] = v7m_pop(env); |
| env->regs[12] = v7m_pop(env); |
| env->regs[14] = v7m_pop(env); |
| env->regs[15] = v7m_pop(env); |
| xpsr = v7m_pop(env); |
| xpsr_write(env, xpsr, 0xfffffdff); |
| /* Undo stack alignment. */ |
| if (xpsr & 0x200) |
| env->regs[13] |= 4; |
| /* ??? The exception return type specifies Thread/Handler mode. However |
| this is also implied by the xPSR value. Not sure what to do |
| if there is a mismatch. */ |
| /* ??? Likewise for mismatches between the CONTROL register and the stack |
| pointer. */ |
| } |
| |
| void do_interrupt_v7m(CPUARMState *env) |
| { |
| uint32_t xpsr = xpsr_read(env); |
| uint32_t lr; |
| uint32_t addr; |
| |
| lr = 0xfffffff1; |
| if (env->v7m.current_sp) |
| lr |= 4; |
| if (env->v7m.exception == 0) |
| lr |= 8; |
| |
| /* For exceptions we just mark as pending on the NVIC, and let that |
| handle it. */ |
| /* TODO: Need to escalate if the current priority is higher than the |
| one we're raising. */ |
| switch (env->exception_index) { |
| case EXCP_UDEF: |
| armv7m_nvic_set_pending(env->v7m.nvic, ARMV7M_EXCP_USAGE); |
| return; |
| case EXCP_SWI: |
| env->regs[15] += 2; |
| armv7m_nvic_set_pending(env->v7m.nvic, ARMV7M_EXCP_SVC); |
| return; |
| case EXCP_PREFETCH_ABORT: |
| case EXCP_DATA_ABORT: |
| armv7m_nvic_set_pending(env->v7m.nvic, ARMV7M_EXCP_MEM); |
| return; |
| case EXCP_BKPT: |
| armv7m_nvic_set_pending(env->v7m.nvic, ARMV7M_EXCP_DEBUG); |
| return; |
| case EXCP_IRQ: |
| env->v7m.exception = armv7m_nvic_acknowledge_irq(env->v7m.nvic); |
| break; |
| case EXCP_EXCEPTION_EXIT: |
| do_v7m_exception_exit(env); |
| return; |
| default: |
| cpu_abort(env, "Unhandled exception 0x%x\n", env->exception_index); |
| return; /* Never happens. Keep compiler happy. */ |
| } |
| |
| /* Align stack pointer. */ |
| /* ??? Should only do this if Configuration Control Register |
| STACKALIGN bit is set. */ |
| if (env->regs[13] & 4) { |
| env->regs[13] += 4; |
| xpsr |= 0x200; |
| } |
| /* Switch to the hander mode. */ |
| v7m_push(env, xpsr); |
| v7m_push(env, env->regs[15]); |
| v7m_push(env, env->regs[14]); |
| v7m_push(env, env->regs[12]); |
| v7m_push(env, env->regs[3]); |
| v7m_push(env, env->regs[2]); |
| v7m_push(env, env->regs[1]); |
| v7m_push(env, env->regs[0]); |
| switch_v7m_sp(env, 0); |
| env->uncached_cpsr &= ~CPSR_IT; |
| env->regs[14] = lr; |
| addr = ldl_phys(env->v7m.vecbase + env->v7m.exception * 4); |
| env->regs[15] = addr & 0xfffffffe; |
| env->thumb = addr & 1; |
| } |
| |
| /* Handle a CPU exception. */ |
| void do_interrupt(CPUARMState *env) |
| { |
| uint32_t addr; |
| uint32_t mask; |
| int new_mode; |
| uint32_t offset; |
| |
| if (IS_M(env)) { |
| do_interrupt_v7m(env); |
| return; |
| } |
| /* TODO: Vectored interrupt controller. */ |
| switch (env->exception_index) { |
| case EXCP_UDEF: |
| new_mode = ARM_CPU_MODE_UND; |
| addr = 0x04; |
| mask = CPSR_I; |
| if (env->thumb) |
| offset = 2; |
| else |
| offset = 4; |
| break; |
| case EXCP_SWI: |
| if (semihosting_enabled) { |
| /* Check for semihosting interrupt. */ |
| if (env->thumb) { |
| mask = lduw_code(env->regs[15] - 2) & 0xff; |
| } else { |
| mask = ldl_code(env->regs[15] - 4) & 0xffffff; |
| } |
| /* Only intercept calls from privileged modes, to provide some |
| semblance of security. */ |
| if (((mask == 0x123456 && !env->thumb) |
| || (mask == 0xab && env->thumb)) |
| && (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR) { |
| env->regs[0] = do_arm_semihosting(env); |
| return; |
| } |
| } |
| new_mode = ARM_CPU_MODE_SVC; |
| addr = 0x08; |
| mask = CPSR_I; |
| /* The PC already points to the next instructon. */ |
| offset = 0; |
| break; |
| case EXCP_BKPT: |
| /* See if this is a semihosting syscall. */ |
| if (env->thumb) { |
| mask = lduw_code(env->regs[15]) & 0xff; |
| if (mask == 0xab |
| && (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR) { |
| env->regs[15] += 2; |
| env->regs[0] = do_arm_semihosting(env); |
| return; |
| } |
| } |
| /* Fall through to prefetch abort. */ |
| case EXCP_PREFETCH_ABORT: |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x0c; |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| break; |
| case EXCP_DATA_ABORT: |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x10; |
| mask = CPSR_A | CPSR_I; |
| offset = 8; |
| break; |
| case EXCP_IRQ: |
| new_mode = ARM_CPU_MODE_IRQ; |
| addr = 0x18; |
| /* Disable IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| break; |
| case EXCP_FIQ: |
| new_mode = ARM_CPU_MODE_FIQ; |
| addr = 0x1c; |
| /* Disable FIQ, IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| offset = 4; |
| break; |
| default: |
| cpu_abort(env, "Unhandled exception 0x%x\n", env->exception_index); |
| return; /* Never happens. Keep compiler happy. */ |
| } |
| /* High vectors. */ |
| if (env->cp15.c1_sys & (1 << 13)) { |
| addr += 0xffff0000; |
| } |
| switch_mode (env, new_mode); |
| env->spsr = cpsr_read(env); |
| /* Clear IT bits. */ |
| env->condexec_bits = 0; |
| /* Switch to the new mode, and switch to Arm mode. */ |
| /* ??? Thumb interrupt handlers not implemented. */ |
| env->uncached_cpsr = (env->uncached_cpsr & ~CPSR_M) | new_mode; |
| env->uncached_cpsr |= mask; |
| env->thumb = 0; |
| env->regs[14] = env->regs[15] + offset; |
| env->regs[15] = addr; |
| env->interrupt_request |= CPU_INTERRUPT_EXITTB; |
| } |
| |
| /* Check section/page access permissions. |
| Returns the page protection flags, or zero if the access is not |
| permitted. */ |
| static inline int check_ap(CPUState *env, int ap, int domain, int access_type, |
| int is_user) |
| { |
| int prot_ro; |
| |
| if (domain == 3) |
| return PAGE_READ | PAGE_WRITE; |
| |
| if (access_type == 1) |
| prot_ro = 0; |
| else |
| prot_ro = PAGE_READ; |
| |
| switch (ap) { |
| case 0: |
| if (access_type == 1) |
| return 0; |
| switch ((env->cp15.c1_sys >> 8) & 3) { |
| case 1: |
| return is_user ? 0 : PAGE_READ; |
| case 2: |
| return PAGE_READ; |
| default: |
| return 0; |
| } |
| case 1: |
| return is_user ? 0 : PAGE_READ | PAGE_WRITE; |
| case 2: |
| if (is_user) |
| return prot_ro; |
| else |
| return PAGE_READ | PAGE_WRITE; |
| case 3: |
| return PAGE_READ | PAGE_WRITE; |
| case 4: case 7: /* Reserved. */ |
| return 0; |
| case 5: |
| return is_user ? 0 : prot_ro; |
| case 6: |
| return prot_ro; |
| default: |
| abort(); |
| } |
| } |
| |
| static int get_phys_addr_v5(CPUState *env, uint32_t address, int access_type, |
| int is_user, uint32_t *phys_ptr, int *prot) |
| { |
| int code; |
| uint32_t table; |
| uint32_t desc; |
| int type; |
| int ap; |
| int domain; |
| uint32_t phys_addr; |
| |
| /* Pagetable walk. */ |
| /* Lookup l1 descriptor. */ |
| if (address & env->cp15.c2_mask) |
| table = env->cp15.c2_base1; |
| else |
| table = env->cp15.c2_base0; |
| table = (table & 0xffffc000) | ((address >> 18) & 0x3ffc); |
| desc = ldl_phys(table); |
| type = (desc & 3); |
| domain = (env->cp15.c3 >> ((desc >> 4) & 0x1e)) & 3; |
| if (type == 0) { |
| /* Secton translation fault. */ |
| code = 5; |
| goto do_fault; |
| } |
| if (domain == 0 || domain == 2) { |
| if (type == 2) |
| code = 9; /* Section domain fault. */ |
| else |
| code = 11; /* Page domain fault. */ |
| goto do_fault; |
| } |
| if (type == 2) { |
| /* 1Mb section. */ |
| phys_addr = (desc & 0xfff00000) | (address & 0x000fffff); |
| ap = (desc >> 10) & 3; |
| code = 13; |
| } else { |
| /* Lookup l2 entry. */ |
| if (type == 1) { |
| /* Coarse pagetable. */ |
| table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc); |
| } else { |
| /* Fine pagetable. */ |
| table = (desc & 0xfffff000) | ((address >> 8) & 0xffc); |
| } |
| desc = ldl_phys(table); |
| switch (desc & 3) { |
| case 0: /* Page translation fault. */ |
| code = 7; |
| goto do_fault; |
| case 1: /* 64k page. */ |
| phys_addr = (desc & 0xffff0000) | (address & 0xffff); |
| ap = (desc >> (4 + ((address >> 13) & 6))) & 3; |
| break; |
| case 2: /* 4k page. */ |
| phys_addr = (desc & 0xfffff000) | (address & 0xfff); |
| ap = (desc >> (4 + ((address >> 13) & 6))) & 3; |
| break; |
| case 3: /* 1k page. */ |
| if (type == 1) { |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| phys_addr = (desc & 0xfffff000) | (address & 0xfff); |
| } else { |
| /* Page translation fault. */ |
| code = 7; |
| goto do_fault; |
| } |
| } else { |
| phys_addr = (desc & 0xfffffc00) | (address & 0x3ff); |
| } |
| ap = (desc >> 4) & 3; |
| break; |
| default: |
| /* Never happens, but compiler isn't smart enough to tell. */ |
| abort(); |
| } |
| code = 15; |
| } |
| *prot = check_ap(env, ap, domain, access_type, is_user); |
| if (!*prot) { |
| /* Access permission fault. */ |
| goto do_fault; |
| } |
| *phys_ptr = phys_addr; |
| return 0; |
| do_fault: |
| return code | (domain << 4); |
| } |
| |
| static int get_phys_addr_v6(CPUState *env, uint32_t address, int access_type, |
| int is_user, uint32_t *phys_ptr, int *prot) |
| { |
| int code; |
| uint32_t table; |
| uint32_t desc; |
| uint32_t xn; |
| int type; |
| int ap; |
| int domain; |
| uint32_t phys_addr; |
| |
| /* Pagetable walk. */ |
| /* Lookup l1 descriptor. */ |
| if (address & env->cp15.c2_mask) |
| table = env->cp15.c2_base1; |
| else |
| table = env->cp15.c2_base0; |
| table = (table & 0xffffc000) | ((address >> 18) & 0x3ffc); |
| desc = ldl_phys(table); |
| type = (desc & 3); |
| if (type == 0) { |
| /* Secton translation fault. */ |
| code = 5; |
| domain = 0; |
| goto do_fault; |
| } else if (type == 2 && (desc & (1 << 18))) { |
| /* Supersection. */ |
| domain = 0; |
| } else { |
| /* Section or page. */ |
| domain = (desc >> 4) & 0x1e; |
| } |
| domain = (env->cp15.c3 >> domain) & 3; |
| if (domain == 0 || domain == 2) { |
| if (type == 2) |
| code = 9; /* Section domain fault. */ |
| else |
| code = 11; /* Page domain fault. */ |
| goto do_fault; |
| } |
| if (type == 2) { |
| if (desc & (1 << 18)) { |
| /* Supersection. */ |
| phys_addr = (desc & 0xff000000) | (address & 0x00ffffff); |
| } else { |
| /* Section. */ |
| phys_addr = (desc & 0xfff00000) | (address & 0x000fffff); |
| } |
| ap = ((desc >> 10) & 3) | ((desc >> 13) & 4); |
| xn = desc & (1 << 4); |
| code = 13; |
| } else { |
| /* Lookup l2 entry. */ |
| table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc); |
| desc = ldl_phys(table); |
| ap = ((desc >> 4) & 3) | ((desc >> 7) & 4); |
| switch (desc & 3) { |
| case 0: /* Page translation fault. */ |
| code = 7; |
| goto do_fault; |
| case 1: /* 64k page. */ |
| phys_addr = (desc & 0xffff0000) | (address & 0xffff); |
| xn = desc & (1 << 15); |
| break; |
| case 2: case 3: /* 4k page. */ |
| phys_addr = (desc & 0xfffff000) | (address & 0xfff); |
| xn = desc & 1; |
| break; |
| default: |
| /* Never happens, but compiler isn't smart enough to tell. */ |
| abort(); |
| } |
| code = 15; |
| } |
| if (xn && access_type == 2) |
| goto do_fault; |
| |
| *prot = check_ap(env, ap, domain, access_type, is_user); |
| if (!*prot) { |
| /* Access permission fault. */ |
| goto do_fault; |
| } |
| *phys_ptr = phys_addr; |
| return 0; |
| do_fault: |
| return code | (domain << 4); |
| } |
| |
| static int get_phys_addr_mpu(CPUState *env, uint32_t address, int access_type, |
| int is_user, uint32_t *phys_ptr, int *prot) |
| { |
| int n; |
| uint32_t mask; |
| uint32_t base; |
| |
| *phys_ptr = address; |
| for (n = 7; n >= 0; n--) { |
| base = env->cp15.c6_region[n]; |
| if ((base & 1) == 0) |
| continue; |
| mask = 1 << ((base >> 1) & 0x1f); |
| /* Keep this shift separate from the above to avoid an |
| (undefined) << 32. */ |
| mask = (mask << 1) - 1; |
| if (((base ^ address) & ~mask) == 0) |
| break; |
| } |
| if (n < 0) |
| return 2; |
| |
| if (access_type == 2) { |
| mask = env->cp15.c5_insn; |
| } else { |
| mask = env->cp15.c5_data; |
| } |
| mask = (mask >> (n * 4)) & 0xf; |
| switch (mask) { |
| case 0: |
| return 1; |
| case 1: |
| if (is_user) |
| return 1; |
| *prot = PAGE_READ | PAGE_WRITE; |
| break; |
| case 2: |
| *prot = PAGE_READ; |
| if (!is_user) |
| *prot |= PAGE_WRITE; |
| break; |
| case 3: |
| *prot = PAGE_READ | PAGE_WRITE; |
| break; |
| case 5: |
| if (is_user) |
| return 1; |
| *prot = PAGE_READ; |
| break; |
| case 6: |
| *prot = PAGE_READ; |
| break; |
| default: |
| /* Bad permission. */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| static inline int get_phys_addr(CPUState *env, uint32_t address, |
| int access_type, int is_user, |
| uint32_t *phys_ptr, int *prot) |
| { |
| /* Fast Context Switch Extension. */ |
| if (address < 0x02000000) |
| address += env->cp15.c13_fcse; |
| |
| if ((env->cp15.c1_sys & 1) == 0) { |
| /* MMU/MPU disabled. */ |
| *phys_ptr = address; |
| *prot = PAGE_READ | PAGE_WRITE; |
| return 0; |
| } else if (arm_feature(env, ARM_FEATURE_MPU)) { |
| return get_phys_addr_mpu(env, address, access_type, is_user, phys_ptr, |
| prot); |
| } else if (env->cp15.c1_sys & (1 << 23)) { |
| return get_phys_addr_v6(env, address, access_type, is_user, phys_ptr, |
| prot); |
| } else { |
| return get_phys_addr_v5(env, address, access_type, is_user, phys_ptr, |
| prot); |
| } |
| } |
| |
| int cpu_arm_handle_mmu_fault (CPUState *env, target_ulong address, |
| int access_type, int mmu_idx, int is_softmmu) |
| { |
| uint32_t phys_addr; |
| int prot; |
| int ret, is_user; |
| |
| is_user = mmu_idx == MMU_USER_IDX; |
| ret = get_phys_addr(env, address, access_type, is_user, &phys_addr, &prot); |
| if (ret == 0) { |
| /* Map a single [sub]page. */ |
| phys_addr &= ~(uint32_t)0x3ff; |
| address &= ~(uint32_t)0x3ff; |
| return tlb_set_page (env, address, phys_addr, prot, mmu_idx, |
| is_softmmu); |
| } |
| |
| if (access_type == 2) { |
| env->cp15.c5_insn = ret; |
| env->cp15.c6_insn = address; |
| env->exception_index = EXCP_PREFETCH_ABORT; |
| } else { |
| env->cp15.c5_data = ret; |
| if (access_type == 1 && arm_feature(env, ARM_FEATURE_V6)) |
| env->cp15.c5_data |= (1 << 11); |
| env->cp15.c6_data = address; |
| env->exception_index = EXCP_DATA_ABORT; |
| } |
| return 1; |
| } |
| |
| target_phys_addr_t cpu_get_phys_page_debug(CPUState *env, target_ulong addr) |
| { |
| uint32_t phys_addr; |
| int prot; |
| int ret; |
| |
| ret = get_phys_addr(env, addr, 0, 0, &phys_addr, &prot); |
| |
| if (ret != 0) |
| return -1; |
| |
| return phys_addr; |
| } |
| |
| /* Not really implemented. Need to figure out a sane way of doing this. |
| Maybe add generic watchpoint support and use that. */ |
| |
| void helper_mark_exclusive(CPUState *env, uint32_t addr) |
| { |
| env->mmon_addr = addr; |
| } |
| |
| int helper_test_exclusive(CPUState *env, uint32_t addr) |
| { |
| return (env->mmon_addr != addr); |
| } |
| |
| void helper_clrex(CPUState *env) |
| { |
| env->mmon_addr = -1; |
| } |
| |
| void helper_set_cp(CPUState *env, uint32_t insn, uint32_t val) |
| { |
| int cp_num = (insn >> 8) & 0xf; |
| int cp_info = (insn >> 5) & 7; |
| int src = (insn >> 16) & 0xf; |
| int operand = insn & 0xf; |
| |
| if (env->cp[cp_num].cp_write) |
| env->cp[cp_num].cp_write(env->cp[cp_num].opaque, |
| cp_info, src, operand, val); |
| } |
| |
| uint32_t helper_get_cp(CPUState *env, uint32_t insn) |
| { |
| int cp_num = (insn >> 8) & 0xf; |
| int cp_info = (insn >> 5) & 7; |
| int dest = (insn >> 16) & 0xf; |
| int operand = insn & 0xf; |
| |
| if (env->cp[cp_num].cp_read) |
| return env->cp[cp_num].cp_read(env->cp[cp_num].opaque, |
| cp_info, dest, operand); |
| return 0; |
| } |
| |
| /* Return basic MPU access permission bits. */ |
| static uint32_t simple_mpu_ap_bits(uint32_t val) |
| { |
| uint32_t ret; |
| uint32_t mask; |
| int i; |
| ret = 0; |
| mask = 3; |
| for (i = 0; i < 16; i += 2) { |
| ret |= (val >> i) & mask; |
| mask <<= 2; |
| } |
| return ret; |
| } |
| |
| /* Pad basic MPU access permission bits to extended format. */ |
| static uint32_t extended_mpu_ap_bits(uint32_t val) |
| { |
| uint32_t ret; |
| uint32_t mask; |
| int i; |
| ret = 0; |
| mask = 3; |
| for (i = 0; i < 16; i += 2) { |
| ret |= (val & mask) << i; |
| mask <<= 2; |
| } |
| return ret; |
| } |
| |
| void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val) |
| { |
| int op1; |
| int op2; |
| int crm; |
| |
| op1 = (insn >> 21) & 7; |
| op2 = (insn >> 5) & 7; |
| crm = insn & 0xf; |
| switch ((insn >> 16) & 0xf) { |
| case 0: |
| if (((insn >> 21) & 7) == 2) { |
| /* ??? Select cache level. Ignore. */ |
| return; |
| } |
| /* ID codes. */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) |
| break; |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| break; |
| goto bad_reg; |
| case 1: /* System configuration. */ |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| op2 = 0; |
| switch (op2) { |
| case 0: |
| if (!arm_feature(env, ARM_FEATURE_XSCALE) || crm == 0) |
| env->cp15.c1_sys = val; |
| /* ??? Lots of these bits are not implemented. */ |
| /* This may enable/disable the MMU, so do a TLB flush. */ |
| tlb_flush(env, 1); |
| break; |
| case 1: /* Auxiliary cotrol register. */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| env->cp15.c1_xscaleauxcr = val; |
| break; |
| } |
| /* Not implemented. */ |
| break; |
| case 2: |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) |
| goto bad_reg; |
| env->cp15.c1_coproc = val; |
| /* ??? Is this safe when called from within a TB? */ |
| tb_flush(env); |
| break; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 2: /* MMU Page table control / MPU cache control. */ |
| if (arm_feature(env, ARM_FEATURE_MPU)) { |
| switch (op2) { |
| case 0: |
| env->cp15.c2_data = val; |
| break; |
| case 1: |
| env->cp15.c2_insn = val; |
| break; |
| default: |
| goto bad_reg; |
| } |
| } else { |
| switch (op2) { |
| case 0: |
| env->cp15.c2_base0 = val; |
| break; |
| case 1: |
| env->cp15.c2_base1 = val; |
| break; |
| case 2: |
| env->cp15.c2_mask = ~(((uint32_t)0xffffffffu) >> val); |
| break; |
| default: |
| goto bad_reg; |
| } |
| } |
| break; |
| case 3: /* MMU Domain access control / MPU write buffer control. */ |
| env->cp15.c3 = val; |
| tlb_flush(env, 1); /* Flush TLB as domain not tracked in TLB */ |
| break; |
| case 4: /* Reserved. */ |
| goto bad_reg; |
| case 5: /* MMU Fault status / MPU access permission. */ |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| op2 = 0; |
| switch (op2) { |
| case 0: |
| if (arm_feature(env, ARM_FEATURE_MPU)) |
| val = extended_mpu_ap_bits(val); |
| env->cp15.c5_data = val; |
| break; |
| case 1: |
| if (arm_feature(env, ARM_FEATURE_MPU)) |
| val = extended_mpu_ap_bits(val); |
| env->cp15.c5_insn = val; |
| break; |
| case 2: |
| if (!arm_feature(env, ARM_FEATURE_MPU)) |
| goto bad_reg; |
| env->cp15.c5_data = val; |
| break; |
| case 3: |
| if (!arm_feature(env, ARM_FEATURE_MPU)) |
| goto bad_reg; |
| env->cp15.c5_insn = val; |
| break; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 6: /* MMU Fault address / MPU base/size. */ |
| if (arm_feature(env, ARM_FEATURE_MPU)) { |
| if (crm >= 8) |
| goto bad_reg; |
| env->cp15.c6_region[crm] = val; |
| } else { |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| op2 = 0; |
| switch (op2) { |
| case 0: |
| env->cp15.c6_data = val; |
| break; |
| case 1: /* ??? This is WFAR on armv6 */ |
| case 2: |
| env->cp15.c6_insn = val; |
| break; |
| default: |
| goto bad_reg; |
| } |
| } |
| break; |
| case 7: /* Cache control. */ |
| env->cp15.c15_i_max = 0x000; |
| env->cp15.c15_i_min = 0xff0; |
| /* No cache, so nothing to do. */ |
| /* ??? MPCore has VA to PA translation functions. */ |
| break; |
| case 8: /* MMU TLB control. */ |
| switch (op2) { |
| case 0: /* Invalidate all. */ |
| tlb_flush(env, 0); |
| break; |
| case 1: /* Invalidate single TLB entry. */ |
| #if 0 |
| /* ??? This is wrong for large pages and sections. */ |
| /* As an ugly hack to make linux work we always flush a 4K |
| pages. */ |
| val &= 0xfffff000; |
| tlb_flush_page(env, val); |
| tlb_flush_page(env, val + 0x400); |
| tlb_flush_page(env, val + 0x800); |
| tlb_flush_page(env, val + 0xc00); |
| #else |
| tlb_flush(env, 1); |
| #endif |
| break; |
| case 2: /* Invalidate on ASID. */ |
| tlb_flush(env, val == 0); |
| break; |
| case 3: /* Invalidate single entry on MVA. */ |
| /* ??? This is like case 1, but ignores ASID. */ |
| tlb_flush(env, 1); |
| break; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 9: |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| break; |
| switch (crm) { |
| case 0: /* Cache lockdown. */ |
| switch (op1) { |
| case 0: /* L1 cache. */ |
| switch (op2) { |
| case 0: |
| env->cp15.c9_data = val; |
| break; |
| case 1: |
| env->cp15.c9_insn = val; |
| break; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 1: /* L2 cache. */ |
| /* Ignore writes to L2 lockdown/auxiliary registers. */ |
| break; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 1: /* TCM memory region registers. */ |
| /* Not implemented. */ |
| goto bad_reg; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 10: /* MMU TLB lockdown. */ |
| /* ??? TLB lockdown not implemented. */ |
| break; |
| case 12: /* Reserved. */ |
| goto bad_reg; |
| case 13: /* Process ID. */ |
| switch (op2) { |
| case 0: |
| /* Unlike real hardware the qemu TLB uses virtual addresses, |
| not modified virtual addresses, so this causes a TLB flush. |
| */ |
| if (env->cp15.c13_fcse != val) |
| tlb_flush(env, 1); |
| env->cp15.c13_fcse = val; |
| break; |
| case 1: |
| /* This changes the ASID, so do a TLB flush. */ |
| if (env->cp15.c13_context != val |
| && !arm_feature(env, ARM_FEATURE_MPU)) |
| tlb_flush(env, 0); |
| env->cp15.c13_context = val; |
| break; |
| case 2: |
| env->cp15.c13_tls1 = val; |
| break; |
| case 3: |
| env->cp15.c13_tls2 = val; |
| break; |
| case 4: |
| env->cp15.c13_tls3 = val; |
| break; |
| default: |
| goto bad_reg; |
| } |
| break; |
| case 14: /* Reserved. */ |
| goto bad_reg; |
| case 15: /* Implementation specific. */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| if (op2 == 0 && crm == 1) { |
| if (env->cp15.c15_cpar != (val & 0x3fff)) { |
| /* Changes cp0 to cp13 behavior, so needs a TB flush. */ |
| tb_flush(env); |
| env->cp15.c15_cpar = val & 0x3fff; |
| } |
| break; |
| } |
| goto bad_reg; |
| } |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) { |
| switch (crm) { |
| case 0: |
| break; |
| case 1: /* Set TI925T configuration. */ |
| env->cp15.c15_ticonfig = val & 0xe7; |
| env->cp15.c0_cpuid = (val & (1 << 5)) ? /* OS_TYPE bit */ |
| ARM_CPUID_TI915T : ARM_CPUID_TI925T; |
| break; |
| case 2: /* Set I_max. */ |
| env->cp15.c15_i_max = val; |
| break; |
| case 3: /* Set I_min. */ |
| env->cp15.c15_i_min = val; |
| break; |
| case 4: /* Set thread-ID. */ |
| env->cp15.c15_threadid = val & 0xffff; |
| break; |
| case 8: /* Wait-for-interrupt (deprecated). */ |
| cpu_interrupt(env, CPU_INTERRUPT_HALT); |
| break; |
| default: |
| goto bad_reg; |
| } |
| } |
| break; |
| } |
| return; |
| bad_reg: |
| /* ??? For debugging only. Should raise illegal instruction exception. */ |
| cpu_abort(env, "Unimplemented cp15 register write (c%d, c%d, {%d, %d})\n", |
| (insn >> 16) & 0xf, crm, op1, op2); |
| } |
| |
| uint32_t helper_get_cp15(CPUState *env, uint32_t insn) |
| { |
| int op1; |
| int op2; |
| int crm; |
| |
| op1 = (insn >> 21) & 7; |
| op2 = (insn >> 5) & 7; |
| crm = insn & 0xf; |
| switch ((insn >> 16) & 0xf) { |
| case 0: /* ID codes. */ |
| switch (op1) { |
| case 0: |
| switch (crm) { |
| case 0: |
| switch (op2) { |
| case 0: /* Device ID. */ |
| return env->cp15.c0_cpuid; |
| case 1: /* Cache Type. */ |
| return env->cp15.c0_cachetype; |
| case 2: /* TCM status. */ |
| return 0; |
| case 3: /* TLB type register. */ |
| return 0; /* No lockable TLB entries. */ |
| case 5: /* CPU ID */ |
| return env->cpu_index; |
| default: |
| goto bad_reg; |
| } |
| case 1: |
| if (!arm_feature(env, ARM_FEATURE_V6)) |
| goto bad_reg; |
| return env->cp15.c0_c1[op2]; |
| case 2: |
| if (!arm_feature(env, ARM_FEATURE_V6)) |
| goto bad_reg; |
| return env->cp15.c0_c2[op2]; |
| case 3: case 4: case 5: case 6: case 7: |
| return 0; |
| default: |
| goto bad_reg; |
| } |
| case 1: |
| /* These registers aren't documented on arm11 cores. However |
| Linux looks at them anyway. */ |
| if (!arm_feature(env, ARM_FEATURE_V6)) |
| goto bad_reg; |
| if (crm != 0) |
| goto bad_reg; |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) |
| goto bad_reg; |
| return 0; |
| default: |
| goto bad_reg; |
| } |
| case 1: /* System configuration. */ |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| op2 = 0; |
| switch (op2) { |
| case 0: /* Control register. */ |
| return env->cp15.c1_sys; |
| case 1: /* Auxiliary control register. */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) |
| return env->cp15.c1_xscaleauxcr; |
| if (!arm_feature(env, ARM_FEATURE_AUXCR)) |
| goto bad_reg; |
| switch (ARM_CPUID(env)) { |
| case ARM_CPUID_ARM1026: |
| return 1; |
| case ARM_CPUID_ARM1136: |
| return 7; |
| case ARM_CPUID_ARM11MPCORE: |
| return 1; |
| case ARM_CPUID_CORTEXA8: |
| return 0; |
| default: |
| goto bad_reg; |
| } |
| case 2: /* Coprocessor access register. */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) |
| goto bad_reg; |
| return env->cp15.c1_coproc; |
| default: |
| goto bad_reg; |
| } |
| case 2: /* MMU Page table control / MPU cache control. */ |
| if (arm_feature(env, ARM_FEATURE_MPU)) { |
| switch (op2) { |
| case 0: |
| return env->cp15.c2_data; |
| break; |
| case 1: |
| return env->cp15.c2_insn; |
| break; |
| default: |
| goto bad_reg; |
| } |
| } else { |
| switch (op2) { |
| case 0: |
| return env->cp15.c2_base0; |
| case 1: |
| return env->cp15.c2_base1; |
| case 2: |
| { |
| int n; |
| uint32_t mask; |
| n = 0; |
| mask = env->cp15.c2_mask; |
| while (mask) { |
| n++; |
| mask <<= 1; |
| } |
| return n; |
| } |
| default: |
| goto bad_reg; |
| } |
| } |
| case 3: /* MMU Domain access control / MPU write buffer control. */ |
| return env->cp15.c3; |
| case 4: /* Reserved. */ |
| goto bad_reg; |
| case 5: /* MMU Fault status / MPU access permission. */ |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| op2 = 0; |
| switch (op2) { |
| case 0: |
| if (arm_feature(env, ARM_FEATURE_MPU)) |
| return simple_mpu_ap_bits(env->cp15.c5_data); |
| return env->cp15.c5_data; |
| case 1: |
| if (arm_feature(env, ARM_FEATURE_MPU)) |
| return simple_mpu_ap_bits(env->cp15.c5_data); |
| return env->cp15.c5_insn; |
| case 2: |
| if (!arm_feature(env, ARM_FEATURE_MPU)) |
| goto bad_reg; |
| return env->cp15.c5_data; |
| case 3: |
| if (!arm_feature(env, ARM_FEATURE_MPU)) |
| goto bad_reg; |
| return env->cp15.c5_insn; |
| default: |
| goto bad_reg; |
| } |
| case 6: /* MMU Fault address. */ |
| if (arm_feature(env, ARM_FEATURE_MPU)) { |
| if (crm >= 8) |
| goto bad_reg; |
| return env->cp15.c6_region[crm]; |
| } else { |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| op2 = 0; |
| switch (op2) { |
| case 0: |
| return env->cp15.c6_data; |
| case 1: |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| /* Watchpoint Fault Adrress. */ |
| return 0; /* Not implemented. */ |
| } else { |
| /* Instruction Fault Adrress. */ |
| /* Arm9 doesn't have an IFAR, but implementing it anyway |
| shouldn't do any harm. */ |
| return env->cp15.c6_insn; |
| } |
| case 2: |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| /* Instruction Fault Adrress. */ |
| return env->cp15.c6_insn; |
| } else { |
| goto bad_reg; |
| } |
| default: |
| goto bad_reg; |
| } |
| } |
| case 7: /* Cache control. */ |
| /* ??? This is for test, clean and invaidate operations that set the |
| Z flag. We can't represent N = Z = 1, so it also clears |
| the N flag. Oh well. */ |
| env->NZF = 0; |
| return 0; |
| case 8: /* MMU TLB control. */ |
| goto bad_reg; |
| case 9: /* Cache lockdown. */ |
| switch (op1) { |
| case 0: /* L1 cache. */ |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) |
| return 0; |
| switch (op2) { |
| case 0: |
| return env->cp15.c9_data; |
| case 1: |
| return env->cp15.c9_insn; |
| default: |
| goto bad_reg; |
| } |
| case 1: /* L2 cache */ |
| if (crm != 0) |
| goto bad_reg; |
| /* L2 Lockdown and Auxiliary control. */ |
| return 0; |
| default: |
| goto bad_reg; |
| } |
| case 10: /* MMU TLB lockdown. */ |
| /* ??? TLB lockdown not implemented. */ |
| return 0; |
| case 11: /* TCM DMA control. */ |
| case 12: /* Reserved. */ |
| goto bad_reg; |
| case 13: /* Process ID. */ |
| switch (op2) { |
| case 0: |
| return env->cp15.c13_fcse; |
| case 1: |
| return env->cp15.c13_context; |
| case 2: |
| return env->cp15.c13_tls1; |
| case 3: |
| return env->cp15.c13_tls2; |
| case 4: |
| return env->cp15.c13_tls3; |
| default: |
| goto bad_reg; |
| } |
| case 14: /* Reserved. */ |
| goto bad_reg; |
| case 15: /* Implementation specific. */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| if (op2 == 0 && crm == 1) |
| return env->cp15.c15_cpar; |
| |
| goto bad_reg; |
| } |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) { |
| switch (crm) { |
| case 0: |
| return 0; |
| case 1: /* Read TI925T configuration. */ |
| return env->cp15.c15_ticonfig; |
| case 2: /* Read I_max. */ |
| return env->cp15.c15_i_max; |
| case 3: /* Read I_min. */ |
| return env->cp15.c15_i_min; |
| case 4: /* Read thread-ID. */ |
| return env->cp15.c15_threadid; |
| case 8: /* TI925T_status */ |
| return 0; |
| } |
| goto bad_reg; |
| } |
| return 0; |
| } |
| bad_reg: |
| /* ??? For debugging only. Should raise illegal instruction exception. */ |
| cpu_abort(env, "Unimplemented cp15 register read (c%d, c%d, {%d, %d})\n", |
| (insn >> 16) & 0xf, crm, op1, op2); |
| return 0; |
| } |
| |
| void helper_set_r13_banked(CPUState *env, int mode, uint32_t val) |
| { |
| env->banked_r13[bank_number(mode)] = val; |
| } |
| |
| uint32_t helper_get_r13_banked(CPUState *env, int mode) |
| { |
| return env->banked_r13[bank_number(mode)]; |
| } |
| |
| uint32_t helper_v7m_mrs(CPUState *env, int reg) |
| { |
| switch (reg) { |
| case 0: /* APSR */ |
| return xpsr_read(env) & 0xf8000000; |
| case 1: /* IAPSR */ |
| return xpsr_read(env) & 0xf80001ff; |
| case 2: /* EAPSR */ |
| return xpsr_read(env) & 0xff00fc00; |
| case 3: /* xPSR */ |
| return xpsr_read(env) & 0xff00fdff; |
| case 5: /* IPSR */ |
| return xpsr_read(env) & 0x000001ff; |
| case 6: /* EPSR */ |
| return xpsr_read(env) & 0x0700fc00; |
| case 7: /* IEPSR */ |
| return xpsr_read(env) & 0x0700edff; |
| case 8: /* MSP */ |
| return env->v7m.current_sp ? env->v7m.other_sp : env->regs[13]; |
| case 9: /* PSP */ |
| return env->v7m.current_sp ? env->regs[13] : env->v7m.other_sp; |
| case 16: /* PRIMASK */ |
| return (env->uncached_cpsr & CPSR_I) != 0; |
| case 17: /* FAULTMASK */ |
| return (env->uncached_cpsr & CPSR_F) != 0; |
| case 18: /* BASEPRI */ |
| case 19: /* BASEPRI_MAX */ |
| return env->v7m.basepri; |
| case 20: /* CONTROL */ |
| return env->v7m.control; |
| default: |
| /* ??? For debugging only. */ |
| cpu_abort(env, "Unimplemented system register read (%d)\n", reg); |
| return 0; |
| } |
| } |
| |
| void helper_v7m_msr(CPUState *env, int reg, uint32_t val) |
| { |
| switch (reg) { |
| case 0: /* APSR */ |
| xpsr_write(env, val, 0xf8000000); |
| break; |
| case 1: /* IAPSR */ |
| xpsr_write(env, val, 0xf8000000); |
| break; |
| case 2: /* EAPSR */ |
| xpsr_write(env, val, 0xfe00fc00); |
| break; |
| case 3: /* xPSR */ |
| xpsr_write(env, val, 0xfe00fc00); |
| break; |
| case 5: /* IPSR */ |
| /* IPSR bits are readonly. */ |
| break; |
| case 6: /* EPSR */ |
| xpsr_write(env, val, 0x0600fc00); |
| break; |
| case 7: /* IEPSR */ |
| xpsr_write(env, val, 0x0600fc00); |
| break; |
| case 8: /* MSP */ |
| if (env->v7m.current_sp) |
| env->v7m.other_sp = val; |
| else |
| env->regs[13] = val; |
| break; |
| case 9: /* PSP */ |
| if (env->v7m.current_sp) |
| env->regs[13] = val; |
| else |
| env->v7m.other_sp = val; |
| break; |
| case 16: /* PRIMASK */ |
| if (val & 1) |
| env->uncached_cpsr |= CPSR_I; |
| else |
| env->uncached_cpsr &= ~CPSR_I; |
| break; |
| case 17: /* FAULTMASK */ |
| if (val & 1) |
| env->uncached_cpsr |= CPSR_F; |
| else |
| env->uncached_cpsr &= ~CPSR_F; |
| break; |
| case 18: /* BASEPRI */ |
| env->v7m.basepri = val & 0xff; |
| break; |
| case 19: /* BASEPRI_MAX */ |
| val &= 0xff; |
| if (val != 0 && (val < env->v7m.basepri || env->v7m.basepri == 0)) |
| env->v7m.basepri = val; |
| break; |
| case 20: /* CONTROL */ |
| env->v7m.control = val & 3; |
| switch_v7m_sp(env, (val & 2) != 0); |
| break; |
| default: |
| /* ??? For debugging only. */ |
| cpu_abort(env, "Unimplemented system register write (%d)\n", reg); |
| return; |
| } |
| } |
| |
| void cpu_arm_set_cp_io(CPUARMState *env, int cpnum, |
| ARMReadCPFunc *cp_read, ARMWriteCPFunc *cp_write, |
| void *opaque) |
| { |
| if (cpnum < 0 || cpnum > 14) { |
| cpu_abort(env, "Bad coprocessor number: %i\n", cpnum); |
| return; |
| } |
| |
| env->cp[cpnum].cp_read = cp_read; |
| env->cp[cpnum].cp_write = cp_write; |
| env->cp[cpnum].opaque = opaque; |
| } |
| |
| #endif |