| /* |
| * QEMU i440FX/PIIX3 PCI Bridge Emulation |
| * |
| * Copyright (c) 2006 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "hw.h" |
| #include "pc.h" |
| #include "pci.h" |
| |
| typedef uint32_t pci_addr_t; |
| #include "pci_host.h" |
| |
| typedef PCIHostState I440FXState; |
| |
| static void i440fx_addr_writel(void* opaque, uint32_t addr, uint32_t val) |
| { |
| I440FXState *s = opaque; |
| s->config_reg = val; |
| } |
| |
| static uint32_t i440fx_addr_readl(void* opaque, uint32_t addr) |
| { |
| I440FXState *s = opaque; |
| return s->config_reg; |
| } |
| |
| static void piix3_set_irq(qemu_irq *pic, int irq_num, int level); |
| |
| /* return the global irq number corresponding to a given device irq |
| pin. We could also use the bus number to have a more precise |
| mapping. */ |
| static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num) |
| { |
| int slot_addend; |
| slot_addend = (pci_dev->devfn >> 3) - 1; |
| return (irq_num + slot_addend) & 3; |
| } |
| |
| static uint32_t isa_page_descs[384 / 4]; |
| static uint8_t smm_enabled; |
| |
| static void update_pam(PCIDevice *d, uint32_t start, uint32_t end, int r) |
| { |
| uint32_t addr; |
| |
| // printf("ISA mapping %08x-0x%08x: %d\n", start, end, r); |
| switch(r) { |
| case 3: |
| /* RAM */ |
| cpu_register_physical_memory(start, end - start, |
| start); |
| break; |
| case 1: |
| /* ROM (XXX: not quite correct) */ |
| cpu_register_physical_memory(start, end - start, |
| start | IO_MEM_ROM); |
| break; |
| case 2: |
| case 0: |
| /* XXX: should distinguish read/write cases */ |
| for(addr = start; addr < end; addr += 4096) { |
| cpu_register_physical_memory(addr, 4096, |
| isa_page_descs[(addr - 0xa0000) >> 12]); |
| } |
| break; |
| } |
| } |
| |
| static void i440fx_update_memory_mappings(PCIDevice *d) |
| { |
| int i, r; |
| uint32_t smram, addr; |
| |
| update_pam(d, 0xf0000, 0x100000, (d->config[0x59] >> 4) & 3); |
| for(i = 0; i < 12; i++) { |
| r = (d->config[(i >> 1) + 0x5a] >> ((i & 1) * 4)) & 3; |
| update_pam(d, 0xc0000 + 0x4000 * i, 0xc0000 + 0x4000 * (i + 1), r); |
| } |
| smram = d->config[0x72]; |
| if ((smm_enabled && (smram & 0x08)) || (smram & 0x40)) { |
| cpu_register_physical_memory(0xa0000, 0x20000, 0xa0000); |
| } else { |
| for(addr = 0xa0000; addr < 0xc0000; addr += 4096) { |
| cpu_register_physical_memory(addr, 4096, |
| isa_page_descs[(addr - 0xa0000) >> 12]); |
| } |
| } |
| } |
| |
| void i440fx_set_smm(PCIDevice *d, int val) |
| { |
| val = (val != 0); |
| if (smm_enabled != val) { |
| smm_enabled = val; |
| i440fx_update_memory_mappings(d); |
| } |
| } |
| |
| |
| /* XXX: suppress when better memory API. We make the assumption that |
| no device (in particular the VGA) changes the memory mappings in |
| the 0xa0000-0x100000 range */ |
| void i440fx_init_memory_mappings(PCIDevice *d) |
| { |
| int i; |
| for(i = 0; i < 96; i++) { |
| isa_page_descs[i] = cpu_get_physical_page_desc(0xa0000 + i * 0x1000); |
| } |
| } |
| |
| static void i440fx_write_config(PCIDevice *d, |
| uint32_t address, uint32_t val, int len) |
| { |
| /* XXX: implement SMRAM.D_LOCK */ |
| pci_default_write_config(d, address, val, len); |
| if ((address >= 0x59 && address <= 0x5f) || address == 0x72) |
| i440fx_update_memory_mappings(d); |
| } |
| |
| static void i440fx_save(QEMUFile* f, void *opaque) |
| { |
| PCIDevice *d = opaque; |
| pci_device_save(d, f); |
| qemu_put_8s(f, &smm_enabled); |
| } |
| |
| static int i440fx_load(QEMUFile* f, void *opaque, int version_id) |
| { |
| PCIDevice *d = opaque; |
| int ret; |
| |
| if (version_id != 1) |
| return -EINVAL; |
| ret = pci_device_load(d, f); |
| if (ret < 0) |
| return ret; |
| i440fx_update_memory_mappings(d); |
| qemu_get_8s(f, &smm_enabled); |
| return 0; |
| } |
| |
| PCIBus *i440fx_init(PCIDevice **pi440fx_state, qemu_irq *pic) |
| { |
| PCIBus *b; |
| PCIDevice *d; |
| I440FXState *s; |
| |
| s = qemu_mallocz(sizeof(I440FXState)); |
| b = pci_register_bus(piix3_set_irq, pci_slot_get_pirq, pic, 0, 4); |
| s->bus = b; |
| |
| register_ioport_write(0xcf8, 4, 4, i440fx_addr_writel, s); |
| register_ioport_read(0xcf8, 4, 4, i440fx_addr_readl, s); |
| |
| register_ioport_write(0xcfc, 4, 1, pci_host_data_writeb, s); |
| register_ioport_write(0xcfc, 4, 2, pci_host_data_writew, s); |
| register_ioport_write(0xcfc, 4, 4, pci_host_data_writel, s); |
| register_ioport_read(0xcfc, 4, 1, pci_host_data_readb, s); |
| register_ioport_read(0xcfc, 4, 2, pci_host_data_readw, s); |
| register_ioport_read(0xcfc, 4, 4, pci_host_data_readl, s); |
| |
| d = pci_register_device(b, "i440FX", sizeof(PCIDevice), 0, |
| NULL, i440fx_write_config); |
| |
| d->config[0x00] = 0x86; // vendor_id |
| d->config[0x01] = 0x80; |
| d->config[0x02] = 0x37; // device_id |
| d->config[0x03] = 0x12; |
| d->config[0x08] = 0x02; // revision |
| d->config[0x0a] = 0x00; // class_sub = host2pci |
| d->config[0x0b] = 0x06; // class_base = PCI_bridge |
| d->config[0x0e] = 0x00; // header_type |
| |
| d->config[0x72] = 0x02; /* SMRAM */ |
| |
| register_savevm("I440FX", 0, 1, i440fx_save, i440fx_load, d); |
| *pi440fx_state = d; |
| return b; |
| } |
| |
| /* PIIX3 PCI to ISA bridge */ |
| |
| PCIDevice *piix3_dev; |
| PCIDevice *piix4_dev; |
| |
| /* just used for simpler irq handling. */ |
| #define PCI_IRQ_WORDS ((PCI_DEVICES_MAX + 31) / 32) |
| |
| static int pci_irq_levels[4]; |
| |
| static void piix3_set_irq(qemu_irq *pic, int irq_num, int level) |
| { |
| int i, pic_irq, pic_level; |
| |
| piix3_dev->config[0x60 + irq_num] &= ~0x80; // enable bit |
| pci_irq_levels[irq_num] = level; |
| |
| /* now we change the pic irq level according to the piix irq mappings */ |
| /* XXX: optimize */ |
| pic_irq = piix3_dev->config[0x60 + irq_num]; |
| if (pic_irq < 16) { |
| /* The pic level is the logical OR of all the PCI irqs mapped |
| to it */ |
| pic_level = 0; |
| for (i = 0; i < 4; i++) { |
| if (pic_irq == piix3_dev->config[0x60 + i]) |
| pic_level |= pci_irq_levels[i]; |
| } |
| qemu_set_irq(pic[pic_irq], pic_level); |
| } |
| } |
| |
| static void piix3_reset(PCIDevice *d) |
| { |
| uint8_t *pci_conf = d->config; |
| |
| pci_conf[0x04] = 0x07; // master, memory and I/O |
| pci_conf[0x05] = 0x00; |
| pci_conf[0x06] = 0x00; |
| pci_conf[0x07] = 0x02; // PCI_status_devsel_medium |
| pci_conf[0x4c] = 0x4d; |
| pci_conf[0x4e] = 0x03; |
| pci_conf[0x4f] = 0x00; |
| pci_conf[0x60] = 0x80; |
| pci_conf[0x69] = 0x02; |
| pci_conf[0x70] = 0x80; |
| pci_conf[0x76] = 0x0c; |
| pci_conf[0x77] = 0x0c; |
| pci_conf[0x78] = 0x02; |
| pci_conf[0x79] = 0x00; |
| pci_conf[0x80] = 0x00; |
| pci_conf[0x82] = 0x00; |
| pci_conf[0xa0] = 0x08; |
| pci_conf[0xa2] = 0x00; |
| pci_conf[0xa3] = 0x00; |
| pci_conf[0xa4] = 0x00; |
| pci_conf[0xa5] = 0x00; |
| pci_conf[0xa6] = 0x00; |
| pci_conf[0xa7] = 0x00; |
| pci_conf[0xa8] = 0x0f; |
| pci_conf[0xaa] = 0x00; |
| pci_conf[0xab] = 0x00; |
| pci_conf[0xac] = 0x00; |
| pci_conf[0xae] = 0x00; |
| } |
| |
| static void piix4_reset(PCIDevice *d) |
| { |
| uint8_t *pci_conf = d->config; |
| |
| pci_conf[0x04] = 0x07; // master, memory and I/O |
| pci_conf[0x05] = 0x00; |
| pci_conf[0x06] = 0x00; |
| pci_conf[0x07] = 0x02; // PCI_status_devsel_medium |
| pci_conf[0x4c] = 0x4d; |
| pci_conf[0x4e] = 0x03; |
| pci_conf[0x4f] = 0x00; |
| pci_conf[0x60] = 0x0a; // PCI A -> IRQ 10 |
| pci_conf[0x61] = 0x0a; // PCI B -> IRQ 10 |
| pci_conf[0x62] = 0x0b; // PCI C -> IRQ 11 |
| pci_conf[0x63] = 0x0b; // PCI D -> IRQ 11 |
| pci_conf[0x69] = 0x02; |
| pci_conf[0x70] = 0x80; |
| pci_conf[0x76] = 0x0c; |
| pci_conf[0x77] = 0x0c; |
| pci_conf[0x78] = 0x02; |
| pci_conf[0x79] = 0x00; |
| pci_conf[0x80] = 0x00; |
| pci_conf[0x82] = 0x00; |
| pci_conf[0xa0] = 0x08; |
| pci_conf[0xa2] = 0x00; |
| pci_conf[0xa3] = 0x00; |
| pci_conf[0xa4] = 0x00; |
| pci_conf[0xa5] = 0x00; |
| pci_conf[0xa6] = 0x00; |
| pci_conf[0xa7] = 0x00; |
| pci_conf[0xa8] = 0x0f; |
| pci_conf[0xaa] = 0x00; |
| pci_conf[0xab] = 0x00; |
| pci_conf[0xac] = 0x00; |
| pci_conf[0xae] = 0x00; |
| } |
| |
| static void piix_save(QEMUFile* f, void *opaque) |
| { |
| PCIDevice *d = opaque; |
| pci_device_save(d, f); |
| } |
| |
| static int piix_load(QEMUFile* f, void *opaque, int version_id) |
| { |
| PCIDevice *d = opaque; |
| if (version_id != 2) |
| return -EINVAL; |
| return pci_device_load(d, f); |
| } |
| |
| int piix_init(PCIBus *bus, int devfn) |
| { |
| PCIDevice *d; |
| uint8_t *pci_conf; |
| |
| d = pci_register_device(bus, "PIIX", sizeof(PCIDevice), |
| devfn, NULL, NULL); |
| register_savevm("PIIX", 0, 2, piix_save, piix_load, d); |
| |
| piix3_dev = d; |
| pci_conf = d->config; |
| |
| pci_conf[0x00] = 0x86; // Intel |
| pci_conf[0x01] = 0x80; |
| pci_conf[0x02] = 0x2E; // 82371FB PIIX PCI-to-ISA bridge |
| pci_conf[0x03] = 0x12; |
| pci_conf[0x08] = 0x02; // Step A1 |
| pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA |
| pci_conf[0x0b] = 0x06; // class_base = PCI_bridge |
| pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic |
| |
| piix3_reset(d); |
| return d->devfn; |
| } |
| |
| int piix3_init(PCIBus *bus, int devfn) |
| { |
| PCIDevice *d; |
| uint8_t *pci_conf; |
| |
| d = pci_register_device(bus, "PIIX3", sizeof(PCIDevice), |
| devfn, NULL, NULL); |
| register_savevm("PIIX3", 0, 2, piix_save, piix_load, d); |
| |
| piix3_dev = d; |
| pci_conf = d->config; |
| |
| pci_conf[0x00] = 0x86; // Intel |
| pci_conf[0x01] = 0x80; |
| pci_conf[0x02] = 0x00; // 82371SB PIIX3 PCI-to-ISA bridge (Step A1) |
| pci_conf[0x03] = 0x70; |
| pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA |
| pci_conf[0x0b] = 0x06; // class_base = PCI_bridge |
| pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic |
| |
| piix3_reset(d); |
| return d->devfn; |
| } |
| |
| int piix4_init(PCIBus *bus, int devfn) |
| { |
| PCIDevice *d; |
| uint8_t *pci_conf; |
| |
| d = pci_register_device(bus, "PIIX4", sizeof(PCIDevice), |
| devfn, NULL, NULL); |
| register_savevm("PIIX4", 0, 2, piix_save, piix_load, d); |
| |
| piix4_dev = d; |
| pci_conf = d->config; |
| |
| pci_conf[0x00] = 0x86; // Intel |
| pci_conf[0x01] = 0x80; |
| pci_conf[0x02] = 0x10; // 82371AB/EB/MB PIIX4 PCI-to-ISA bridge |
| pci_conf[0x03] = 0x71; |
| pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA |
| pci_conf[0x0b] = 0x06; // class_base = PCI_bridge |
| pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic |
| |
| piix4_reset(d); |
| return d->devfn; |
| } |