diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c
index 62957ec..755fc0b 100644
--- a/hw/char/stm32l4x5_usart.c
+++ b/hw/char/stm32l4x5_usart.c
@@ -154,6 +154,123 @@
 REG32(TDR, 0x28)
     FIELD(TDR, TDR, 0, 9)
 
+static void stm32l4x5_update_irq(Stm32l4x5UsartBaseState *s)
+{
+    if (((s->isr & R_ISR_WUF_MASK) && (s->cr3 & R_CR3_WUFIE_MASK))        ||
+        ((s->isr & R_ISR_CMF_MASK) && (s->cr1 & R_CR1_CMIE_MASK))         ||
+        ((s->isr & R_ISR_ABRF_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK))      ||
+        ((s->isr & R_ISR_EOBF_MASK) && (s->cr1 & R_CR1_EOBIE_MASK))       ||
+        ((s->isr & R_ISR_RTOF_MASK) && (s->cr1 & R_CR1_RTOIE_MASK))       ||
+        ((s->isr & R_ISR_CTSIF_MASK) && (s->cr3 & R_CR3_CTSIE_MASK))      ||
+        ((s->isr & R_ISR_LBDF_MASK) && (s->cr2 & R_CR2_LBDIE_MASK))       ||
+        ((s->isr & R_ISR_TXE_MASK) && (s->cr1 & R_CR1_TXEIE_MASK))        ||
+        ((s->isr & R_ISR_TC_MASK) && (s->cr1 & R_CR1_TCIE_MASK))          ||
+        ((s->isr & R_ISR_RXNE_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK))      ||
+        ((s->isr & R_ISR_IDLE_MASK) && (s->cr1 & R_CR1_IDLEIE_MASK))      ||
+        ((s->isr & R_ISR_ORE_MASK) &&
+            ((s->cr1 & R_CR1_RXNEIE_MASK) || (s->cr3 & R_CR3_EIE_MASK)))  ||
+        /* TODO: Handle NF ? */
+        ((s->isr & R_ISR_FE_MASK) && (s->cr3 & R_CR3_EIE_MASK))           ||
+        ((s->isr & R_ISR_PE_MASK) && (s->cr1 & R_CR1_PEIE_MASK))) {
+        qemu_irq_raise(s->irq);
+        trace_stm32l4x5_usart_irq_raised(s->isr);
+    } else {
+        qemu_irq_lower(s->irq);
+        trace_stm32l4x5_usart_irq_lowered();
+    }
+}
+
+static int stm32l4x5_usart_base_can_receive(void *opaque)
+{
+    Stm32l4x5UsartBaseState *s = opaque;
+
+    if (!(s->isr & R_ISR_RXNE_MASK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+static void stm32l4x5_usart_base_receive(void *opaque, const uint8_t *buf,
+                                         int size)
+{
+    Stm32l4x5UsartBaseState *s = opaque;
+
+    if (!((s->cr1 & R_CR1_UE_MASK) && (s->cr1 & R_CR1_RE_MASK))) {
+        trace_stm32l4x5_usart_receiver_not_enabled(
+            FIELD_EX32(s->cr1, CR1, UE), FIELD_EX32(s->cr1, CR1, RE));
+        return;
+    }
+
+    /* Check if overrun detection is enabled and if there is an overrun */
+    if (!(s->cr3 & R_CR3_OVRDIS_MASK) && (s->isr & R_ISR_RXNE_MASK)) {
+        /*
+         * A character has been received while
+         * the previous has not been read = Overrun.
+         */
+        s->isr |= R_ISR_ORE_MASK;
+        trace_stm32l4x5_usart_overrun_detected(s->rdr, *buf);
+    } else {
+        /* No overrun */
+        s->rdr = *buf;
+        s->isr |= R_ISR_RXNE_MASK;
+        trace_stm32l4x5_usart_rx(s->rdr);
+    }
+
+    stm32l4x5_update_irq(s);
+}
+
+/*
+ * Try to send tx data, and arrange to be called back later if
+ * we can't (ie the char backend is busy/blocking).
+ */
+static gboolean usart_transmit(void *do_not_use, GIOCondition cond,
+                               void *opaque)
+{
+    Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(opaque);
+    int ret;
+    /* TODO: Handle 9 bits transmission */
+    uint8_t ch = s->tdr;
+
+    s->watch_tag = 0;
+
+    if (!(s->cr1 & R_CR1_TE_MASK) || (s->isr & R_ISR_TXE_MASK)) {
+        return G_SOURCE_REMOVE;
+    }
+
+    ret = qemu_chr_fe_write(&s->chr, &ch, 1);
+    if (ret <= 0) {
+        s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
+                                             usart_transmit, s);
+        if (!s->watch_tag) {
+            /*
+             * Most common reason to be here is "no chardev backend":
+             * just insta-drain the buffer, so the serial output
+             * goes into a void, rather than blocking the guest.
+             */
+            goto buffer_drained;
+        }
+        /* Transmit pending */
+        trace_stm32l4x5_usart_tx_pending();
+        return G_SOURCE_REMOVE;
+    }
+
+buffer_drained:
+    /* Character successfully sent */
+    trace_stm32l4x5_usart_tx(ch);
+    s->isr |= R_ISR_TC_MASK | R_ISR_TXE_MASK;
+    stm32l4x5_update_irq(s);
+    return G_SOURCE_REMOVE;
+}
+
+static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s)
+{
+    if (s->watch_tag) {
+        g_source_remove(s->watch_tag);
+        s->watch_tag = 0;
+    }
+}
+
 static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type)
 {
     Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj);
@@ -167,6 +284,22 @@
     s->isr = 0x020000C0;
     s->rdr = 0x00000000;
     s->tdr = 0x00000000;
+
+    usart_cancel_transmit(s);
+    stm32l4x5_update_irq(s);
+}
+
+static void usart_update_rqr(Stm32l4x5UsartBaseState *s, uint32_t value)
+{
+    /* TXFRQ */
+    /* Reset RXNE flag */
+    if (value & R_RQR_RXFRQ_MASK) {
+        s->isr &= ~R_ISR_RXNE_MASK;
+    }
+    /* MMRQ */
+    /* SBKRQ */
+    /* ABRRQ */
+    stm32l4x5_update_irq(s);
 }
 
 static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr,
@@ -209,6 +342,7 @@
         retvalue = FIELD_EX32(s->rdr, RDR, RDR);
         /* Reset RXNE flag */
         s->isr &= ~R_ISR_RXNE_MASK;
+        stm32l4x5_update_irq(s);
         break;
     case A_TDR:
         retvalue = FIELD_EX32(s->tdr, TDR, TDR);
@@ -235,6 +369,7 @@
     switch (addr) {
     case A_CR1:
         s->cr1 = value;
+        stm32l4x5_update_irq(s);
         return;
     case A_CR2:
         s->cr2 = value;
@@ -252,6 +387,7 @@
         s->rtor = value;
         return;
     case A_RQR:
+        usart_update_rqr(s, value);
         return;
     case A_ISR:
         qemu_log_mask(LOG_GUEST_ERROR,
@@ -260,6 +396,7 @@
     case A_ICR:
         /* Clear the status flags */
         s->isr &= ~value;
+        stm32l4x5_update_irq(s);
         return;
     case A_RDR:
         qemu_log_mask(LOG_GUEST_ERROR,
@@ -267,6 +404,8 @@
         return;
     case A_TDR:
         s->tdr = value;
+        s->isr &= ~R_ISR_TXE_MASK;
+        usart_transmit(NULL, G_IO_OUT, s);
         return;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
@@ -336,6 +475,10 @@
         error_setg(errp, "USART clock must be wired up by SoC code");
         return;
     }
+
+    qemu_chr_fe_set_handlers(&s->chr, stm32l4x5_usart_base_can_receive,
+                             stm32l4x5_usart_base_receive, NULL, NULL,
+                             s, NULL, true);
 }
 
 static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data)
diff --git a/hw/char/trace-events b/hw/char/trace-events
index 689bed9..f22f0ee 100644
--- a/hw/char/trace-events
+++ b/hw/char/trace-events
@@ -109,6 +109,13 @@
 # stm32l4x5_usart.c
 stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 ""
 stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 ""
+stm32l4x5_usart_rx(uint8_t c) "USART: got character 0x%x from backend"
+stm32l4x5_usart_tx(uint8_t c) "USART: character 0x%x sent to backend"
+stm32l4x5_usart_tx_pending(void) "USART: character send to backend pending"
+stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32
+stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered"
+stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x"
+stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x"
 
 # xen_console.c
 xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u"
diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h
index 8d38a85..dd38666 100644
--- a/include/hw/char/stm32l4x5_usart.h
+++ b/include/hw/char/stm32l4x5_usart.h
@@ -55,6 +55,7 @@
     Clock *clk;
     CharBackend chr;
     qemu_irq irq;
+    guint watch_tag;
 };
 
 struct Stm32l4x5UsartBaseClass {