blob: b5087b5c97e53618bacb140d4eba8e812eab6c30 [file] [log] [blame]
/* Helpers */
#define LI(reg, val) \
mov.u reg, lo:val; \
movh DREG_TEMP_LI, up:val; \
or reg, reg, DREG_TEMP_LI; \
#define LIA(reg, val) \
LI(DREG_TEMP, val) \
mov.a reg, DREG_TEMP;
/* Address definitions */
#define TESTDEV_ADDR 0xf0000000
/* Register definitions */
#define DREG_RS1 %d0
#define DREG_RS2 %d1
#define DREG_RS3 %d2
#define DREG_CALC_RESULT %d3
#define DREG_CALC_PSW %d4
#define DREG_CORRECT_PSW %d5
#define DREG_TEMP_LI %d10
#define DREG_TEMP %d11
#define DREG_TEST_NUM %d14
#define DREG_CORRECT_RESULT %d15
#define DREG_CORRECT_RESULT_2 %d13
#define AREG_ADDR %a0
#define AREG_CORRECT_RESULT %a3
#define DREG_DEV_ADDR %a15
#define EREG_RS1 %e6
#define EREG_RS1_LO %d6
#define EREG_RS1_HI %d7
#define EREG_RS2 %e8
#define EREG_RS2_LO %d8
#define EREG_RS2_HI %d9
#define EREG_CALC_RESULT %e8
#define EREG_CALC_RESULT_HI %d9
#define EREG_CALC_RESULT_LO %d8
#define EREG_CORRECT_RESULT_LO %d0
#define EREG_CORRECT_RESULT_HI %d1
/* Test case wrappers */
#define TEST_CASE(num, testreg, correct, code...) \
test_ ## num: \
code; \
LI(DREG_CORRECT_RESULT, correct) \
mov DREG_TEST_NUM, num; \
jne testreg, DREG_CORRECT_RESULT, fail \
#define TEST_CASE_E(num, correct_lo, correct_hi, code...) \
test_ ## num: \
code; \
mov DREG_TEST_NUM, num; \
LI(EREG_CORRECT_RESULT_LO, correct_lo) \
jne EREG_CALC_RESULT_LO, EREG_CORRECT_RESULT_LO, fail; \
LI(EREG_CORRECT_RESULT_HI, correct_hi) \
jne EREG_CALC_RESULT_HI, EREG_CORRECT_RESULT_HI, fail;
#define TEST_CASE_PSW(num, testreg, correct, correct_psw, code...) \
test_ ## num: \
code; \
LI(DREG_CORRECT_RESULT, correct) \
mov DREG_TEST_NUM, num; \
jne testreg, DREG_CORRECT_RESULT, fail; \
mfcr DREG_CALC_PSW, $psw; \
LI(DREG_CORRECT_PSW, correct_psw) \
mov DREG_TEST_NUM, num; \
jne DREG_CALC_PSW, DREG_CORRECT_PSW, fail;
#define TEST_LD(insn, num, result, addr_result, ld_pattern) \
test_ ## num: \
LIA(AREG_ADDR, test_data) \
insn DREG_CALC_RESULT, ld_pattern; \
LI(DREG_CORRECT_RESULT, result) \
mov DREG_TEST_NUM, num; \
jne DREG_CALC_RESULT, DREG_CORRECT_RESULT, fail; \
mov.d DREG_CALC_RESULT, AREG_ADDR; \
LI(DREG_CORRECT_RESULT, addr_result) \
jne DREG_CALC_RESULT, DREG_CORRECT_RESULT, fail;
#define TEST_LD_SRO(insn, num, result, addr_result, ld_pattern) \
test_ ## num: \
LIA(AREG_ADDR, test_data) \
insn %d15, ld_pattern; \
LI(DREG_CORRECT_RESULT_2, result) \
mov DREG_TEST_NUM, num; \
jne %d15, DREG_CORRECT_RESULT_2, fail; \
mov.d DREG_CALC_RESULT, AREG_ADDR; \
LI(DREG_CORRECT_RESULT, addr_result) \
jne DREG_CALC_RESULT, DREG_CORRECT_RESULT, fail;
/* Actual test case type
* e.g inst %dX, %dY -> TEST_D_D
* inst %dX, %dY, %dZ -> TEST_D_DD
* inst %eX, %dY, %dZ -> TEST_E_DD
*/
#define TEST_D_D(insn, num, result, rs1) \
TEST_CASE(num, DREG_CALC_RESULT, result, \
LI(DREG_RS1, rs1); \
insn DREG_CALC_RESULT, DREG_RS1; \
)
#define TEST_D_D_PSW(insn, num, result, psw, rs1) \
TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw, \
LI(DREG_RS1, rs1); \
rstv; \
insn DREG_CORRECT_RESULT, DREG_RS1; \
)
#define TEST_D_DDD(insn, num, result, rs1, rs2, rs3) \
TEST_CASE(num, DREG_CALC_RESULT, result, \
LI(DREG_RS1, rs1); \
LI(DREG_RS2, rs2); \
LI(DREG_RS3, rs3); \
rstv; \
insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2, DREG_RS3; \
)
#define TEST_D_DD_PSW(insn, num, result, psw, rs1, rs2) \
TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw, \
LI(DREG_RS1, rs1); \
LI(DREG_RS2, rs2); \
rstv; \
insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2; \
)
#define TEST_D_DDD_PSW(insn, num, result, psw, rs1, rs2, rs3) \
TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw, \
LI(DREG_RS1, rs1); \
LI(DREG_RS2, rs2); \
LI(DREG_RS3, rs3); \
rstv; \
insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2, DREG_RS3; \
)
#define TEST_D_DDI(insn, num, result, rs1, rs2, imm) \
TEST_CASE(num, DREG_CALC_RESULT, result, \
LI(DREG_RS1, rs1); \
LI(DREG_RS2, rs2); \
rstv; \
insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2, imm; \
)
#define TEST_D_DDI_PSW(insn, num, result, psw, rs1, rs2, imm) \
TEST_CASE_PSW(num, DREG_CALC_RESULT, result, psw, \
LI(DREG_RS1, rs1); \
LI(DREG_RS2, rs2); \
rstv; \
insn DREG_CALC_RESULT, DREG_RS1, DREG_RS2, imm; \
)
#define TEST_D_DIDI(insn, num, result, rs1, imm1, rs2, imm2) \
TEST_CASE(num, DREG_CALC_RESULT, result, \
LI(DREG_RS1, rs1); \
LI(DREG_RS2, rs1); \
rstv; \
insn DREG_CALC_RESULT, DREG_RS1, imm1, DREG_RS2, imm2; \
)
#define TEST_E_ED(insn, num, res_hi, res_lo, rs1_hi, rs1_lo, rs2) \
TEST_CASE_E(num, res_lo, res_hi, \
LI(EREG_RS1_LO, rs1_lo); \
LI(EREG_RS1_HI, rs1_hi); \
LI(DREG_RS2, rs2); \
insn EREG_CALC_RESULT, EREG_RS1, DREG_RS2; \
)
#define TEST_E_IDI(insn, num, res_hi, res_lo, imm1, rs1, imm2) \
TEST_CASE_E(num, res_lo, res_hi, \
LI(DREG_RS1, rs1); \
rstv; \
insn EREG_CALC_RESULT, imm1, DREG_RS1, imm2; \
)
/* Pass/Fail handling part */
#define TEST_PASSFAIL \
j pass; \
fail: \
LI(DREG_TEMP, TESTDEV_ADDR) \
mov.a DREG_DEV_ADDR, DREG_TEMP; \
st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\
debug; \
j fail; \
pass: \
LI(DREG_TEMP, TESTDEV_ADDR) \
mov.a DREG_DEV_ADDR, DREG_TEMP; \
mov DREG_TEST_NUM, 0; \
st.w [DREG_DEV_ADDR], DREG_TEST_NUM;\
debug; \
j pass;