hmp/qmp: add block_set_io_throttle
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
diff --git a/block.c b/block.c
index 42bd308..5f979bd 100644
--- a/block.c
+++ b/block.c
@@ -1978,6 +1978,21 @@
info->value->inserted->has_backing_file = true;
info->value->inserted->backing_file = g_strdup(bs->backing_file);
}
+
+ if (bs->io_limits_enabled) {
+ info->value->inserted->bps =
+ bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
+ info->value->inserted->bps_rd =
+ bs->io_limits.bps[BLOCK_IO_LIMIT_READ];
+ info->value->inserted->bps_wr =
+ bs->io_limits.bps[BLOCK_IO_LIMIT_WRITE];
+ info->value->inserted->iops =
+ bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
+ info->value->inserted->iops_rd =
+ bs->io_limits.iops[BLOCK_IO_LIMIT_READ];
+ info->value->inserted->iops_wr =
+ bs->io_limits.iops[BLOCK_IO_LIMIT_WRITE];
+ }
}
/* XXX: waiting for the qapi to support GSList */
diff --git a/blockdev.c b/blockdev.c
index bbe5f11..9068c5b 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -759,6 +759,65 @@
return monitor_read_bdrv_key_start(mon, bs, NULL, NULL);
}
+/* throttling disk I/O limits */
+int do_block_set_io_throttle(Monitor *mon,
+ const QDict *qdict, QObject **ret_data)
+{
+ BlockIOLimit io_limits;
+ const char *devname = qdict_get_str(qdict, "device");
+ BlockDriverState *bs;
+
+ io_limits.bps[BLOCK_IO_LIMIT_TOTAL]
+ = qdict_get_try_int(qdict, "bps", -1);
+ io_limits.bps[BLOCK_IO_LIMIT_READ]
+ = qdict_get_try_int(qdict, "bps_rd", -1);
+ io_limits.bps[BLOCK_IO_LIMIT_WRITE]
+ = qdict_get_try_int(qdict, "bps_wr", -1);
+ io_limits.iops[BLOCK_IO_LIMIT_TOTAL]
+ = qdict_get_try_int(qdict, "iops", -1);
+ io_limits.iops[BLOCK_IO_LIMIT_READ]
+ = qdict_get_try_int(qdict, "iops_rd", -1);
+ io_limits.iops[BLOCK_IO_LIMIT_WRITE]
+ = qdict_get_try_int(qdict, "iops_wr", -1);
+
+ bs = bdrv_find(devname);
+ if (!bs) {
+ qerror_report(QERR_DEVICE_NOT_FOUND, devname);
+ return -1;
+ }
+
+ if ((io_limits.bps[BLOCK_IO_LIMIT_TOTAL] == -1)
+ || (io_limits.bps[BLOCK_IO_LIMIT_READ] == -1)
+ || (io_limits.bps[BLOCK_IO_LIMIT_WRITE] == -1)
+ || (io_limits.iops[BLOCK_IO_LIMIT_TOTAL] == -1)
+ || (io_limits.iops[BLOCK_IO_LIMIT_READ] == -1)
+ || (io_limits.iops[BLOCK_IO_LIMIT_WRITE] == -1)) {
+ qerror_report(QERR_MISSING_PARAMETER,
+ "bps/bps_rd/bps_wr/iops/iops_rd/iops_wr");
+ return -1;
+ }
+
+ if (!do_check_io_limits(&io_limits)) {
+ qerror_report(QERR_INVALID_PARAMETER_COMBINATION);
+ return -1;
+ }
+
+ bs->io_limits = io_limits;
+ bs->slice_time = BLOCK_IO_SLICE_TIME;
+
+ if (!bs->io_limits_enabled && bdrv_io_limits_enabled(bs)) {
+ bdrv_io_limits_enable(bs);
+ } else if (bs->io_limits_enabled && !bdrv_io_limits_enabled(bs)) {
+ bdrv_io_limits_disable(bs);
+ } else {
+ if (bs->block_timer) {
+ qemu_mod_timer(bs->block_timer, qemu_get_clock_ns(vm_clock));
+ }
+ }
+
+ return 0;
+}
+
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
{
const char *id = qdict_get_str(qdict, "id");
diff --git a/blockdev.h b/blockdev.h
index 3587786..1b48a75 100644
--- a/blockdev.h
+++ b/blockdev.h
@@ -63,6 +63,8 @@
int do_change_block(Monitor *mon, const char *device,
const char *filename, const char *fmt);
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data);
+int do_block_set_io_throttle(Monitor *mon,
+ const QDict *qdict, QObject **ret_data);
int do_snapshot_blkdev(Monitor *mon, const QDict *qdict, QObject **ret_data);
int do_block_resize(Monitor *mon, const QDict *qdict, QObject **ret_data);
diff --git a/hmp-commands.hx b/hmp-commands.hx
index 089c1ac..f8d855e 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1207,6 +1207,21 @@
},
STEXI
+@item block_set_io_throttle @var{device} @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+@findex block_set_io_throttle
+Change I/O throttle limits for a block drive to @var{bps} @var{bps_rd} @var{bps_wr} @var{iops} @var{iops_rd} @var{iops_wr}
+ETEXI
+
+ {
+ .name = "block_set_io_throttle",
+ .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
+ .params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
+ .help = "change I/O throttle limits for a block drive",
+ .user_print = monitor_user_noop,
+ .mhandler.cmd_new = do_block_set_io_throttle,
+ },
+
+STEXI
@item block_passwd @var{device} @var{password}
@findex block_passwd
Set the encrypted device @var{device} password to @var{password}
diff --git a/hmp.c b/hmp.c
index 443d3a7..dfab7ad 100644
--- a/hmp.c
+++ b/hmp.c
@@ -216,6 +216,16 @@
info->value->inserted->ro,
info->value->inserted->drv,
info->value->inserted->encrypted);
+
+ monitor_printf(mon, " bps=%" PRId64 " bps_rd=%" PRId64
+ " bps_wr=%" PRId64 " iops=%" PRId64
+ " iops_rd=%" PRId64 " iops_wr=%" PRId64,
+ info->value->inserted->bps,
+ info->value->inserted->bps_rd,
+ info->value->inserted->bps_wr,
+ info->value->inserted->iops,
+ info->value->inserted->iops_rd,
+ info->value->inserted->iops_wr);
} else {
monitor_printf(mon, " [not inserted]");
}
diff --git a/qapi-schema.json b/qapi-schema.json
index cb1ba77..fbbdbe0 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -370,13 +370,27 @@
#
# @encrypted: true if the backing device is encrypted
#
+# @bps: total throughput limit in bytes per second is specified
+#
+# @bps_rd: read throughput limit in bytes per second is specified
+#
+# @bps_wr: write throughput limit in bytes per second is specified
+#
+# @iops: total I/O operations per second is specified
+#
+# @iops_rd: read I/O operations per second is specified
+#
+# @iops_wr: write I/O operations per second is specified
+#
# Since: 0.14.0
#
# Notes: This interface is only found in @BlockInfo.
##
{ 'type': 'BlockDeviceInfo',
'data': { 'file': 'str', 'ro': 'bool', 'drv': 'str',
- '*backing_file': 'str', 'encrypted': 'bool' } }
+ '*backing_file': 'str', 'encrypted': 'bool',
+ 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
+ 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int'} }
##
# @BlockDeviceIoStatus:
diff --git a/qerror.c b/qerror.c
index fdf62b9..d679d67 100644
--- a/qerror.c
+++ b/qerror.c
@@ -246,6 +246,10 @@
.error_fmt = QERR_QGA_COMMAND_FAILED,
.desc = "Guest agent command failed, error was '%(message)'",
},
+ {
+ .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
+ .desc = "Invalid paramter combination",
+ },
{}
};
diff --git a/qerror.h b/qerror.h
index 2d3d43b..560d458 100644
--- a/qerror.h
+++ b/qerror.h
@@ -204,4 +204,7 @@
#define QERR_QGA_COMMAND_FAILED \
"{ 'class': 'QgaCommandFailed', 'data': { 'message': %s } }"
+#define QERR_INVALID_PARAMETER_COMBINATION \
+ "{ 'class': 'InvalidParameterCombination', 'data': {} }"
+
#endif /* QERROR_H */
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 97975a5..94da2a8 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -851,6 +851,44 @@
EQMP
{
+ .name = "block_set_io_throttle",
+ .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l",
+ .params = "device bps bps_rd bps_wr iops iops_rd iops_wr",
+ .help = "change I/O throttle limits for a block drive",
+ .user_print = monitor_user_noop,
+ .mhandler.cmd_new = do_block_set_io_throttle,
+ },
+
+SQMP
+block_set_io_throttle
+------------
+
+Change I/O throttle limits for a block drive.
+
+Arguments:
+
+- "device": device name (json-string)
+- "bps": total throughput limit in bytes per second(json-int)
+- "bps_rd": read throughput limit in bytes per second(json-int)
+- "bps_wr": read throughput limit in bytes per second(json-int)
+- "iops": total I/O operations per second(json-int)
+- "iops_rd": read I/O operations per second(json-int)
+- "iops_wr": write I/O operations per second(json-int)
+
+Example:
+
+-> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
+ "bps": "1000000",
+ "bps_rd": "0",
+ "bps_wr": "0",
+ "iops": "0",
+ "iops_rd": "0",
+ "iops_wr": "0" } }
+<- { "return": {} }
+
+EQMP
+
+ {
.name = "set_password",
.args_type = "protocol:s,password:s,connected:s?",
.params = "protocol password action-if-connected",
@@ -1152,6 +1190,13 @@
"tftp", "vdi", "vmdk", "vpc", "vvfat"
- "backing_file": backing file name (json-string, optional)
- "encrypted": true if encrypted, false otherwise (json-bool)
+ - "bps": limit total bytes per second (json-int)
+ - "bps_rd": limit read bytes per second (json-int)
+ - "bps_wr": limit write bytes per second (json-int)
+ - "iops": limit total I/O operations per second (json-int)
+ - "iops_rd": limit read operations per second (json-int)
+ - "iops_wr": limit write operations per second (json-int)
+
- "io-status": I/O operation status, only present if the device supports it
and the VM is configured to stop on errors. It's always reset
to "ok" when the "cont" command is issued (json_string, optional)
@@ -1171,7 +1216,13 @@
"ro":false,
"drv":"qcow2",
"encrypted":false,
- "file":"disks/test.img"
+ "file":"disks/test.img",
+ "bps":1000000,
+ "bps_rd":0,
+ "bps_wr":0,
+ "iops":1000000,
+ "iops_rd":0,
+ "iops_wr":0,
},
"type":"unknown"
},
