| /* |
| * PC SMBus implementation |
| * splitted from acpi.c |
| * |
| * Copyright (c) 2006 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License version 2 as published by the Free Software Foundation. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see |
| * <http://www.gnu.org/licenses/>. |
| */ |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/i386/pc.h" |
| #include "hw/i2c/pm_smbus.h" |
| #include "hw/i2c/smbus.h" |
| |
| /* no save/load? */ |
| |
| #define SMBHSTSTS 0x00 |
| #define SMBHSTCNT 0x02 |
| #define SMBHSTCMD 0x03 |
| #define SMBHSTADD 0x04 |
| #define SMBHSTDAT0 0x05 |
| #define SMBHSTDAT1 0x06 |
| #define SMBBLKDAT 0x07 |
| |
| #define STS_HOST_BUSY (1) |
| #define STS_INTR (1<<1) |
| #define STS_DEV_ERR (1<<2) |
| #define STS_BUS_ERR (1<<3) |
| #define STS_FAILED (1<<4) |
| #define STS_SMBALERT (1<<5) |
| #define STS_INUSE_STS (1<<6) |
| #define STS_BYTE_DONE (1<<7) |
| /* Signs of successfully transaction end : |
| * ByteDoneStatus = 1 (STS_BYTE_DONE) and INTR = 1 (STS_INTR ) |
| */ |
| |
| //#define DEBUG |
| |
| #ifdef DEBUG |
| # define SMBUS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__) |
| #else |
| # define SMBUS_DPRINTF(format, ...) do { } while (0) |
| #endif |
| |
| |
| static void smb_transaction(PMSMBus *s) |
| { |
| uint8_t prot = (s->smb_ctl >> 2) & 0x07; |
| uint8_t read = s->smb_addr & 0x01; |
| uint8_t cmd = s->smb_cmd; |
| uint8_t addr = s->smb_addr >> 1; |
| I2CBus *bus = s->smbus; |
| int ret; |
| |
| SMBUS_DPRINTF("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot); |
| /* Transaction isn't exec if STS_DEV_ERR bit set */ |
| if ((s->smb_stat & STS_DEV_ERR) != 0) { |
| goto error; |
| } |
| switch(prot) { |
| case 0x0: |
| ret = smbus_quick_command(bus, addr, read); |
| goto done; |
| case 0x1: |
| if (read) { |
| ret = smbus_receive_byte(bus, addr); |
| goto data8; |
| } else { |
| ret = smbus_send_byte(bus, addr, cmd); |
| goto done; |
| } |
| case 0x2: |
| if (read) { |
| ret = smbus_read_byte(bus, addr, cmd); |
| goto data8; |
| } else { |
| ret = smbus_write_byte(bus, addr, cmd, s->smb_data0); |
| goto done; |
| } |
| break; |
| case 0x3: |
| if (read) { |
| ret = smbus_read_word(bus, addr, cmd); |
| goto data16; |
| } else { |
| ret = smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0); |
| goto done; |
| } |
| break; |
| case 0x5: |
| if (read) { |
| ret = smbus_read_block(bus, addr, cmd, s->smb_data); |
| goto data8; |
| } else { |
| ret = smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0); |
| goto done; |
| } |
| break; |
| default: |
| goto error; |
| } |
| abort(); |
| |
| data16: |
| if (ret < 0) { |
| goto error; |
| } |
| s->smb_data1 = ret >> 8; |
| data8: |
| if (ret < 0) { |
| goto error; |
| } |
| s->smb_data0 = ret; |
| done: |
| if (ret < 0) { |
| goto error; |
| } |
| s->smb_stat |= STS_BYTE_DONE | STS_INTR; |
| return; |
| |
| error: |
| s->smb_stat |= STS_DEV_ERR; |
| return; |
| |
| } |
| |
| static void smb_ioport_writeb(void *opaque, hwaddr addr, uint64_t val, |
| unsigned width) |
| { |
| PMSMBus *s = opaque; |
| |
| SMBUS_DPRINTF("SMB writeb port=0x%04" HWADDR_PRIx |
| " val=0x%02" PRIx64 "\n", addr, val); |
| switch(addr) { |
| case SMBHSTSTS: |
| s->smb_stat = (~(val & 0xff)) & s->smb_stat; |
| s->smb_index = 0; |
| break; |
| case SMBHSTCNT: |
| s->smb_ctl = val; |
| if (val & 0x40) |
| smb_transaction(s); |
| break; |
| case SMBHSTCMD: |
| s->smb_cmd = val; |
| break; |
| case SMBHSTADD: |
| s->smb_addr = val; |
| break; |
| case SMBHSTDAT0: |
| s->smb_data0 = val; |
| break; |
| case SMBHSTDAT1: |
| s->smb_data1 = val; |
| break; |
| case SMBBLKDAT: |
| s->smb_data[s->smb_index++] = val; |
| if (s->smb_index > 31) |
| s->smb_index = 0; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static uint64_t smb_ioport_readb(void *opaque, hwaddr addr, unsigned width) |
| { |
| PMSMBus *s = opaque; |
| uint32_t val; |
| |
| switch(addr) { |
| case SMBHSTSTS: |
| val = s->smb_stat; |
| break; |
| case SMBHSTCNT: |
| s->smb_index = 0; |
| val = s->smb_ctl & 0x1f; |
| break; |
| case SMBHSTCMD: |
| val = s->smb_cmd; |
| break; |
| case SMBHSTADD: |
| val = s->smb_addr; |
| break; |
| case SMBHSTDAT0: |
| val = s->smb_data0; |
| break; |
| case SMBHSTDAT1: |
| val = s->smb_data1; |
| break; |
| case SMBBLKDAT: |
| val = s->smb_data[s->smb_index++]; |
| if (s->smb_index > 31) |
| s->smb_index = 0; |
| break; |
| default: |
| val = 0; |
| break; |
| } |
| SMBUS_DPRINTF("SMB readb port=0x%04" HWADDR_PRIx " val=0x%02x\n", addr, val); |
| return val; |
| } |
| |
| static const MemoryRegionOps pm_smbus_ops = { |
| .read = smb_ioport_readb, |
| .write = smb_ioport_writeb, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 1, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| void pm_smbus_init(DeviceState *parent, PMSMBus *smb) |
| { |
| smb->smbus = i2c_init_bus(parent, "i2c"); |
| memory_region_init_io(&smb->io, OBJECT(parent), &pm_smbus_ops, smb, |
| "pm-smbus", 64); |
| } |