Halt/reboot support for Linux, by Daniel Jacobowitz. This is a band-aid
until we emulate real MIPS hardware with real firmware.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2221 c046a42c-6fe2-441c-8c8c-71466251a162
diff --git a/hw/mips_r4k.c b/hw/mips_r4k.c
index 6c838ac..60eb191 100644
--- a/hw/mips_r4k.c
+++ b/hw/mips_r4k.c
@@ -110,6 +110,93 @@
cpu_mips_update_count(env, 1, 0);
}
+static void mips_qemu_writel (void *opaque, target_phys_addr_t addr,
+ uint32_t val)
+{
+ if ((addr & 0xffff) == 0 && val == 42)
+ qemu_system_reset_request ();
+ else if ((addr & 0xffff) == 4 && val == 42)
+ qemu_system_shutdown_request ();
+}
+
+static uint32_t mips_qemu_readl (void *opaque, target_phys_addr_t addr)
+{
+ return 0;
+}
+
+static CPUWriteMemoryFunc *mips_qemu_write[] = {
+ &mips_qemu_writel,
+ &mips_qemu_writel,
+ &mips_qemu_writel,
+};
+
+static CPUReadMemoryFunc *mips_qemu_read[] = {
+ &mips_qemu_readl,
+ &mips_qemu_readl,
+ &mips_qemu_readl,
+};
+
+static int mips_qemu_iomemtype = 0;
+
+void load_kernel (CPUState *env, int ram_size, const char *kernel_filename,
+ const char *kernel_cmdline,
+ const char *initrd_filename)
+{
+ int64_t entry = 0;
+ long kernel_size, initrd_size;
+
+ kernel_size = load_elf(kernel_filename, VIRT_TO_PHYS_ADDEND, &entry);
+ if (kernel_size >= 0)
+ env->PC = entry;
+ else {
+ kernel_size = load_image(kernel_filename,
+ phys_ram_base + KERNEL_LOAD_ADDR + VIRT_TO_PHYS_ADDEND);
+ if (kernel_size < 0) {
+ fprintf(stderr, "qemu: could not load kernel '%s'\n",
+ kernel_filename);
+ exit(1);
+ }
+ env->PC = KERNEL_LOAD_ADDR;
+ }
+
+ /* load initrd */
+ initrd_size = 0;
+ if (initrd_filename) {
+ initrd_size = load_image(initrd_filename,
+ phys_ram_base + INITRD_LOAD_ADDR + VIRT_TO_PHYS_ADDEND);
+ if (initrd_size == (target_ulong) -1) {
+ fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
+ initrd_filename);
+ exit(1);
+ }
+ }
+
+ /* Store command line. */
+ if (initrd_size > 0) {
+ int ret;
+ ret = sprintf(phys_ram_base + (16 << 20) - 256,
+ "rd_start=0x%08x rd_size=%li ",
+ INITRD_LOAD_ADDR,
+ initrd_size);
+ strcpy (phys_ram_base + (16 << 20) - 256 + ret, kernel_cmdline);
+ }
+ else {
+ strcpy (phys_ram_base + (16 << 20) - 256, kernel_cmdline);
+ }
+
+ *(int *)(phys_ram_base + (16 << 20) - 260) = tswap32 (0x12345678);
+ *(int *)(phys_ram_base + (16 << 20) - 264) = tswap32 (ram_size);
+}
+
+static void main_cpu_reset(void *opaque)
+{
+ CPUState *env = opaque;
+ cpu_reset(env);
+
+ if (env->kernel_filename)
+ load_kernel (env, env->ram_size, env->kernel_filename,
+ env->kernel_cmdline, env->initrd_filename);
+}
void mips_r4k_init (int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
@@ -117,19 +204,24 @@
const char *initrd_filename)
{
char buf[1024];
- int64_t entry = 0;
unsigned long bios_offset;
int ret;
CPUState *env;
- long kernel_size;
int i;
env = cpu_init();
register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
+ qemu_register_reset(main_cpu_reset, env);
/* allocate RAM */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
+ if (!mips_qemu_iomemtype) {
+ mips_qemu_iomemtype = cpu_register_io_memory(0, mips_qemu_read,
+ mips_qemu_write, NULL);
+ }
+ cpu_register_physical_memory(0x1fbf0000, 0x10000, mips_qemu_iomemtype);
+
/* Try to load a BIOS image. If this fails, we continue regardless,
but initialize the hardware ourselves. When a kernel gets
preloaded we also initialize the hardware, since the BIOS wasn't
@@ -146,38 +238,13 @@
buf);
}
- kernel_size = 0;
if (kernel_filename) {
- kernel_size = load_elf(kernel_filename, VIRT_TO_PHYS_ADDEND, &entry);
- if (kernel_size >= 0)
- env->PC = entry;
- else {
- kernel_size = load_image(kernel_filename,
- phys_ram_base + KERNEL_LOAD_ADDR + VIRT_TO_PHYS_ADDEND);
- if (kernel_size < 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- kernel_filename);
- exit(1);
- }
- env->PC = KERNEL_LOAD_ADDR;
- }
-
- /* load initrd */
- if (initrd_filename) {
- if (load_image(initrd_filename,
- phys_ram_base + INITRD_LOAD_ADDR + VIRT_TO_PHYS_ADDEND)
- == (target_ulong) -1) {
- fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
- initrd_filename);
- exit(1);
- }
- }
-
- /* Store command line. */
- strcpy (phys_ram_base + (16 << 20) - 256, kernel_cmdline);
- /* FIXME: little endian support */
- *(int *)(phys_ram_base + (16 << 20) - 260) = tswap32 (0x12345678);
- *(int *)(phys_ram_base + (16 << 20) - 264) = tswap32 (ram_size);
+ load_kernel (env, ram_size, kernel_filename, kernel_cmdline,
+ initrd_filename);
+ env->ram_size = ram_size;
+ env->kernel_filename = kernel_filename;
+ env->kernel_cmdline = kernel_cmdline;
+ env->initrd_filename = initrd_filename;
}
/* Init internal devices */
diff --git a/target-mips/cpu.h b/target-mips/cpu.h
index 3ade7bc..3ac2131 100644
--- a/target-mips/cpu.h
+++ b/target-mips/cpu.h
@@ -182,7 +182,6 @@
uint32_t CP0_ErrorEPC;
uint32_t CP0_DESAVE;
/* Qemu */
- struct QEMUTimer *timer; /* Internal timer */
int interrupt_request;
jmp_buf jmp_env;
int exception_index;
@@ -213,6 +212,13 @@
int halted; /* TRUE if the CPU is in suspend state */
CPU_COMMON
+
+ int ram_size;
+ const char *kernel_filename;
+ const char *kernel_cmdline;
+ const char *initrd_filename;
+
+ struct QEMUTimer *timer; /* Internal timer */
};
#include "cpu-all.h"
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 0d62418..07725b3 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -2425,7 +2425,16 @@
if (!env)
return NULL;
cpu_exec_init(env);
+ cpu_reset(env);
+ return env;
+}
+
+void cpu_reset (CPUMIPSState *env)
+{
+ memset(env, 0, offsetof(CPUMIPSState, breakpoints));
+
tlb_flush(env, 1);
+
/* Minimal init */
env->PC = 0xBFC00000;
#if defined (MIPS_USES_R4K_TLB)
@@ -2456,5 +2465,4 @@
#ifdef MIPS_USES_FPU
env->fcr0 = MIPS_FCR0;
#endif
- return env;
}
