| /* |
| * QEMU PREP PCI host |
| * |
| * Copyright (c) 2006 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "hw.h" |
| #include "pci.h" |
| #include "pci_host.h" |
| #include "prep_pci.h" |
| |
| typedef PCIHostState PREPPCIState; |
| |
| static inline uint32_t PPC_PCIIO_config(target_phys_addr_t addr) |
| { |
| int i; |
| |
| for(i = 0; i < 11; i++) { |
| if ((addr & (1 << (11 + i))) != 0) |
| break; |
| } |
| return (addr & 0x7ff) | (i << 11); |
| } |
| |
| static void PPC_PCIIO_writeb (void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| PREPPCIState *s = opaque; |
| pci_data_write(s->bus, PPC_PCIIO_config(addr), val, 1); |
| } |
| |
| static void PPC_PCIIO_writew (void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| PREPPCIState *s = opaque; |
| val = bswap16(val); |
| pci_data_write(s->bus, PPC_PCIIO_config(addr), val, 2); |
| } |
| |
| static void PPC_PCIIO_writel (void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| PREPPCIState *s = opaque; |
| val = bswap32(val); |
| pci_data_write(s->bus, PPC_PCIIO_config(addr), val, 4); |
| } |
| |
| static uint32_t PPC_PCIIO_readb (void *opaque, target_phys_addr_t addr) |
| { |
| PREPPCIState *s = opaque; |
| uint32_t val; |
| val = pci_data_read(s->bus, PPC_PCIIO_config(addr), 1); |
| return val; |
| } |
| |
| static uint32_t PPC_PCIIO_readw (void *opaque, target_phys_addr_t addr) |
| { |
| PREPPCIState *s = opaque; |
| uint32_t val; |
| val = pci_data_read(s->bus, PPC_PCIIO_config(addr), 2); |
| val = bswap16(val); |
| return val; |
| } |
| |
| static uint32_t PPC_PCIIO_readl (void *opaque, target_phys_addr_t addr) |
| { |
| PREPPCIState *s = opaque; |
| uint32_t val; |
| val = pci_data_read(s->bus, PPC_PCIIO_config(addr), 4); |
| val = bswap32(val); |
| return val; |
| } |
| |
| static const MemoryRegionOps PPC_PCIIO_ops = { |
| .old_mmio = { |
| .read = { PPC_PCIIO_readb, PPC_PCIIO_readw, PPC_PCIIO_readl, }, |
| .write = { PPC_PCIIO_writeb, PPC_PCIIO_writew, PPC_PCIIO_writel, }, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static int prep_map_irq(PCIDevice *pci_dev, int irq_num) |
| { |
| return (irq_num + (pci_dev->devfn >> 3)) & 1; |
| } |
| |
| static void prep_set_irq(void *opaque, int irq_num, int level) |
| { |
| qemu_irq *pic = opaque; |
| |
| qemu_set_irq(pic[(irq_num & 1) ? 11 : 9] , level); |
| } |
| |
| PCIBus *pci_prep_init(qemu_irq *pic, |
| MemoryRegion *address_space_mem, |
| MemoryRegion *address_space_io) |
| { |
| PREPPCIState *s; |
| PCIDevice *d; |
| |
| s = g_malloc0(sizeof(PREPPCIState)); |
| s->bus = pci_register_bus(NULL, "pci", |
| prep_set_irq, prep_map_irq, pic, |
| address_space_mem, |
| address_space_io, |
| 0, 4); |
| |
| memory_region_init_io(&s->conf_mem, &pci_host_conf_be_ops, s, |
| "pci-conf-idx", 1); |
| memory_region_add_subregion(address_space_io, 0xcf8, &s->conf_mem); |
| sysbus_init_ioports(&s->busdev, 0xcf8, 1); |
| |
| memory_region_init_io(&s->data_mem, &pci_host_data_be_ops, s, |
| "pci-conf-data", 1); |
| memory_region_add_subregion(address_space_io, 0xcfc, &s->data_mem); |
| sysbus_init_ioports(&s->busdev, 0xcfc, 1); |
| |
| memory_region_init_io(&s->mmcfg, &PPC_PCIIO_ops, s, "pciio", 0x00400000); |
| memory_region_add_subregion(address_space_mem, 0x80800000, &s->mmcfg); |
| |
| /* PCI host bridge */ |
| d = pci_register_device(s->bus, "PREP Host Bridge - Motorola Raven", |
| sizeof(PCIDevice), 0, NULL, NULL); |
| pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_MOTOROLA); |
| pci_config_set_device_id(d->config, PCI_DEVICE_ID_MOTOROLA_RAVEN); |
| d->config[0x08] = 0x00; // revision |
| pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST); |
| d->config[0x0C] = 0x08; // cache_line_size |
| d->config[0x0D] = 0x10; // latency_timer |
| d->config[0x34] = 0x00; // capabilities_pointer |
| |
| return s->bus; |
| } |