| /* |
| * Virtio crypto Support |
| * |
| * Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD. |
| * |
| * Authors: |
| * Gonglei <arei.gonglei@huawei.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or |
| * (at your option) any later version. See the COPYING file in the |
| * top-level directory. |
| */ |
| #include "qemu/osdep.h" |
| #include "qemu/iov.h" |
| #include "hw/qdev.h" |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| |
| #include "hw/virtio/virtio.h" |
| #include "hw/virtio/virtio-crypto.h" |
| #include "hw/virtio/virtio-access.h" |
| #include "standard-headers/linux/virtio_ids.h" |
| |
| #define VIRTIO_CRYPTO_VM_VERSION 1 |
| |
| /* |
| * Transfer virtqueue index to crypto queue index. |
| * The control virtqueue is after the data virtqueues |
| * so the input value doesn't need to be adjusted |
| */ |
| static inline int virtio_crypto_vq2q(int queue_index) |
| { |
| return queue_index; |
| } |
| |
| static int |
| virtio_crypto_cipher_session_helper(VirtIODevice *vdev, |
| CryptoDevBackendSymSessionInfo *info, |
| struct virtio_crypto_cipher_session_para *cipher_para, |
| struct iovec **iov, unsigned int *out_num) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| unsigned int num = *out_num; |
| |
| info->cipher_alg = ldl_le_p(&cipher_para->algo); |
| info->key_len = ldl_le_p(&cipher_para->keylen); |
| info->direction = ldl_le_p(&cipher_para->op); |
| DPRINTF("cipher_alg=%" PRIu32 ", info->direction=%" PRIu32 "\n", |
| info->cipher_alg, info->direction); |
| |
| if (info->key_len > vcrypto->conf.max_cipher_key_len) { |
| error_report("virtio-crypto length of cipher key is too big: %u", |
| info->key_len); |
| return -VIRTIO_CRYPTO_ERR; |
| } |
| /* Get cipher key */ |
| if (info->key_len > 0) { |
| size_t s; |
| DPRINTF("keylen=%" PRIu32 "\n", info->key_len); |
| |
| info->cipher_key = g_malloc(info->key_len); |
| s = iov_to_buf(*iov, num, 0, info->cipher_key, info->key_len); |
| if (unlikely(s != info->key_len)) { |
| virtio_error(vdev, "virtio-crypto cipher key incorrect"); |
| return -EFAULT; |
| } |
| iov_discard_front(iov, &num, info->key_len); |
| *out_num = num; |
| } |
| |
| return 0; |
| } |
| |
| static int64_t |
| virtio_crypto_create_sym_session(VirtIOCrypto *vcrypto, |
| struct virtio_crypto_sym_create_session_req *sess_req, |
| uint32_t queue_id, |
| uint32_t opcode, |
| struct iovec *iov, unsigned int out_num) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto); |
| CryptoDevBackendSymSessionInfo info; |
| int64_t session_id; |
| int queue_index; |
| uint32_t op_type; |
| Error *local_err = NULL; |
| int ret; |
| |
| memset(&info, 0, sizeof(info)); |
| op_type = ldl_le_p(&sess_req->op_type); |
| info.op_type = op_type; |
| info.op_code = opcode; |
| |
| if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) { |
| ret = virtio_crypto_cipher_session_helper(vdev, &info, |
| &sess_req->u.cipher.para, |
| &iov, &out_num); |
| if (ret < 0) { |
| goto err; |
| } |
| } else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) { |
| size_t s; |
| /* cipher part */ |
| ret = virtio_crypto_cipher_session_helper(vdev, &info, |
| &sess_req->u.chain.para.cipher_param, |
| &iov, &out_num); |
| if (ret < 0) { |
| goto err; |
| } |
| /* hash part */ |
| info.alg_chain_order = ldl_le_p( |
| &sess_req->u.chain.para.alg_chain_order); |
| info.add_len = ldl_le_p(&sess_req->u.chain.para.aad_len); |
| info.hash_mode = ldl_le_p(&sess_req->u.chain.para.hash_mode); |
| if (info.hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_AUTH) { |
| info.hash_alg = ldl_le_p(&sess_req->u.chain.para.u.mac_param.algo); |
| info.auth_key_len = ldl_le_p( |
| &sess_req->u.chain.para.u.mac_param.auth_key_len); |
| info.hash_result_len = ldl_le_p( |
| &sess_req->u.chain.para.u.mac_param.hash_result_len); |
| if (info.auth_key_len > vcrypto->conf.max_auth_key_len) { |
| error_report("virtio-crypto length of auth key is too big: %u", |
| info.auth_key_len); |
| ret = -VIRTIO_CRYPTO_ERR; |
| goto err; |
| } |
| /* get auth key */ |
| if (info.auth_key_len > 0) { |
| DPRINTF("auth_keylen=%" PRIu32 "\n", info.auth_key_len); |
| info.auth_key = g_malloc(info.auth_key_len); |
| s = iov_to_buf(iov, out_num, 0, info.auth_key, |
| info.auth_key_len); |
| if (unlikely(s != info.auth_key_len)) { |
| virtio_error(vdev, |
| "virtio-crypto authenticated key incorrect"); |
| ret = -EFAULT; |
| goto err; |
| } |
| iov_discard_front(&iov, &out_num, info.auth_key_len); |
| } |
| } else if (info.hash_mode == VIRTIO_CRYPTO_SYM_HASH_MODE_PLAIN) { |
| info.hash_alg = ldl_le_p( |
| &sess_req->u.chain.para.u.hash_param.algo); |
| info.hash_result_len = ldl_le_p( |
| &sess_req->u.chain.para.u.hash_param.hash_result_len); |
| } else { |
| /* VIRTIO_CRYPTO_SYM_HASH_MODE_NESTED */ |
| error_report("unsupported hash mode"); |
| ret = -VIRTIO_CRYPTO_NOTSUPP; |
| goto err; |
| } |
| } else { |
| /* VIRTIO_CRYPTO_SYM_OP_NONE */ |
| error_report("unsupported cipher op_type: VIRTIO_CRYPTO_SYM_OP_NONE"); |
| ret = -VIRTIO_CRYPTO_NOTSUPP; |
| goto err; |
| } |
| |
| queue_index = virtio_crypto_vq2q(queue_id); |
| session_id = cryptodev_backend_sym_create_session( |
| vcrypto->cryptodev, |
| &info, queue_index, &local_err); |
| if (session_id >= 0) { |
| DPRINTF("create session_id=%" PRIu64 " successfully\n", |
| session_id); |
| |
| ret = session_id; |
| } else { |
| if (local_err) { |
| error_report_err(local_err); |
| } |
| ret = -VIRTIO_CRYPTO_ERR; |
| } |
| |
| err: |
| g_free(info.cipher_key); |
| g_free(info.auth_key); |
| return ret; |
| } |
| |
| static uint8_t |
| virtio_crypto_handle_close_session(VirtIOCrypto *vcrypto, |
| struct virtio_crypto_destroy_session_req *close_sess_req, |
| uint32_t queue_id) |
| { |
| int ret; |
| uint64_t session_id; |
| uint32_t status; |
| Error *local_err = NULL; |
| |
| session_id = ldq_le_p(&close_sess_req->session_id); |
| DPRINTF("close session, id=%" PRIu64 "\n", session_id); |
| |
| ret = cryptodev_backend_sym_close_session( |
| vcrypto->cryptodev, session_id, queue_id, &local_err); |
| if (ret == 0) { |
| status = VIRTIO_CRYPTO_OK; |
| } else { |
| if (local_err) { |
| error_report_err(local_err); |
| } else { |
| error_report("destroy session failed"); |
| } |
| status = VIRTIO_CRYPTO_ERR; |
| } |
| |
| return status; |
| } |
| |
| static void virtio_crypto_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| struct virtio_crypto_op_ctrl_req ctrl; |
| VirtQueueElement *elem; |
| struct iovec *in_iov; |
| struct iovec *out_iov; |
| unsigned in_num; |
| unsigned out_num; |
| uint32_t queue_id; |
| uint32_t opcode; |
| struct virtio_crypto_session_input input; |
| int64_t session_id; |
| uint8_t status; |
| size_t s; |
| |
| for (;;) { |
| elem = virtqueue_pop(vq, sizeof(VirtQueueElement)); |
| if (!elem) { |
| break; |
| } |
| if (elem->out_num < 1 || elem->in_num < 1) { |
| virtio_error(vdev, "virtio-crypto ctrl missing headers"); |
| virtqueue_detach_element(vq, elem, 0); |
| g_free(elem); |
| break; |
| } |
| |
| out_num = elem->out_num; |
| out_iov = elem->out_sg; |
| in_num = elem->in_num; |
| in_iov = elem->in_sg; |
| if (unlikely(iov_to_buf(out_iov, out_num, 0, &ctrl, sizeof(ctrl)) |
| != sizeof(ctrl))) { |
| virtio_error(vdev, "virtio-crypto request ctrl_hdr too short"); |
| virtqueue_detach_element(vq, elem, 0); |
| g_free(elem); |
| break; |
| } |
| iov_discard_front(&out_iov, &out_num, sizeof(ctrl)); |
| |
| opcode = ldl_le_p(&ctrl.header.opcode); |
| queue_id = ldl_le_p(&ctrl.header.queue_id); |
| |
| switch (opcode) { |
| case VIRTIO_CRYPTO_CIPHER_CREATE_SESSION: |
| memset(&input, 0, sizeof(input)); |
| session_id = virtio_crypto_create_sym_session(vcrypto, |
| &ctrl.u.sym_create_session, |
| queue_id, opcode, |
| out_iov, out_num); |
| /* Serious errors, need to reset virtio crypto device */ |
| if (session_id == -EFAULT) { |
| virtqueue_detach_element(vq, elem, 0); |
| break; |
| } else if (session_id == -VIRTIO_CRYPTO_NOTSUPP) { |
| stl_le_p(&input.status, VIRTIO_CRYPTO_NOTSUPP); |
| } else if (session_id == -VIRTIO_CRYPTO_ERR) { |
| stl_le_p(&input.status, VIRTIO_CRYPTO_ERR); |
| } else { |
| /* Set the session id */ |
| stq_le_p(&input.session_id, session_id); |
| stl_le_p(&input.status, VIRTIO_CRYPTO_OK); |
| } |
| |
| s = iov_from_buf(in_iov, in_num, 0, &input, sizeof(input)); |
| if (unlikely(s != sizeof(input))) { |
| virtio_error(vdev, "virtio-crypto input incorrect"); |
| virtqueue_detach_element(vq, elem, 0); |
| break; |
| } |
| virtqueue_push(vq, elem, sizeof(input)); |
| virtio_notify(vdev, vq); |
| break; |
| case VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION: |
| case VIRTIO_CRYPTO_HASH_DESTROY_SESSION: |
| case VIRTIO_CRYPTO_MAC_DESTROY_SESSION: |
| case VIRTIO_CRYPTO_AEAD_DESTROY_SESSION: |
| status = virtio_crypto_handle_close_session(vcrypto, |
| &ctrl.u.destroy_session, queue_id); |
| /* The status only occupy one byte, we can directly use it */ |
| s = iov_from_buf(in_iov, in_num, 0, &status, sizeof(status)); |
| if (unlikely(s != sizeof(status))) { |
| virtio_error(vdev, "virtio-crypto status incorrect"); |
| virtqueue_detach_element(vq, elem, 0); |
| break; |
| } |
| virtqueue_push(vq, elem, sizeof(status)); |
| virtio_notify(vdev, vq); |
| break; |
| case VIRTIO_CRYPTO_HASH_CREATE_SESSION: |
| case VIRTIO_CRYPTO_MAC_CREATE_SESSION: |
| case VIRTIO_CRYPTO_AEAD_CREATE_SESSION: |
| default: |
| error_report("virtio-crypto unsupported ctrl opcode: %d", opcode); |
| memset(&input, 0, sizeof(input)); |
| stl_le_p(&input.status, VIRTIO_CRYPTO_NOTSUPP); |
| s = iov_from_buf(in_iov, in_num, 0, &input, sizeof(input)); |
| if (unlikely(s != sizeof(input))) { |
| virtio_error(vdev, "virtio-crypto input incorrect"); |
| virtqueue_detach_element(vq, elem, 0); |
| break; |
| } |
| virtqueue_push(vq, elem, sizeof(input)); |
| virtio_notify(vdev, vq); |
| |
| break; |
| } /* end switch case */ |
| |
| g_free(elem); |
| } /* end for loop */ |
| } |
| |
| static void virtio_crypto_init_request(VirtIOCrypto *vcrypto, VirtQueue *vq, |
| VirtIOCryptoReq *req) |
| { |
| req->vcrypto = vcrypto; |
| req->vq = vq; |
| req->in = NULL; |
| req->in_iov = NULL; |
| req->in_num = 0; |
| req->in_len = 0; |
| req->flags = CRYPTODEV_BACKEND_ALG__MAX; |
| req->u.sym_op_info = NULL; |
| } |
| |
| static void virtio_crypto_free_request(VirtIOCryptoReq *req) |
| { |
| if (req) { |
| if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) { |
| size_t max_len; |
| CryptoDevBackendSymOpInfo *op_info = req->u.sym_op_info; |
| |
| max_len = op_info->iv_len + |
| op_info->aad_len + |
| op_info->src_len + |
| op_info->dst_len + |
| op_info->digest_result_len; |
| |
| /* Zeroize and free request data structure */ |
| memset(op_info, 0, sizeof(*op_info) + max_len); |
| g_free(op_info); |
| } |
| g_free(req); |
| } |
| } |
| |
| static void |
| virtio_crypto_sym_input_data_helper(VirtIODevice *vdev, |
| VirtIOCryptoReq *req, |
| uint32_t status, |
| CryptoDevBackendSymOpInfo *sym_op_info) |
| { |
| size_t s, len; |
| |
| if (status != VIRTIO_CRYPTO_OK) { |
| return; |
| } |
| |
| len = sym_op_info->src_len; |
| /* Save the cipher result */ |
| s = iov_from_buf(req->in_iov, req->in_num, 0, sym_op_info->dst, len); |
| if (s != len) { |
| virtio_error(vdev, "virtio-crypto dest data incorrect"); |
| return; |
| } |
| |
| iov_discard_front(&req->in_iov, &req->in_num, len); |
| |
| if (sym_op_info->op_type == |
| VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) { |
| /* Save the digest result */ |
| s = iov_from_buf(req->in_iov, req->in_num, 0, |
| sym_op_info->digest_result, |
| sym_op_info->digest_result_len); |
| if (s != sym_op_info->digest_result_len) { |
| virtio_error(vdev, "virtio-crypto digest result incorrect"); |
| } |
| } |
| } |
| |
| static void virtio_crypto_req_complete(VirtIOCryptoReq *req, uint8_t status) |
| { |
| VirtIOCrypto *vcrypto = req->vcrypto; |
| VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto); |
| |
| if (req->flags == CRYPTODEV_BACKEND_ALG_SYM) { |
| virtio_crypto_sym_input_data_helper(vdev, req, status, |
| req->u.sym_op_info); |
| } |
| stb_p(&req->in->status, status); |
| virtqueue_push(req->vq, &req->elem, req->in_len); |
| virtio_notify(vdev, req->vq); |
| } |
| |
| static VirtIOCryptoReq * |
| virtio_crypto_get_request(VirtIOCrypto *s, VirtQueue *vq) |
| { |
| VirtIOCryptoReq *req = virtqueue_pop(vq, sizeof(VirtIOCryptoReq)); |
| |
| if (req) { |
| virtio_crypto_init_request(s, vq, req); |
| } |
| return req; |
| } |
| |
| static CryptoDevBackendSymOpInfo * |
| virtio_crypto_sym_op_helper(VirtIODevice *vdev, |
| struct virtio_crypto_cipher_para *cipher_para, |
| struct virtio_crypto_alg_chain_data_para *alg_chain_para, |
| struct iovec *iov, unsigned int out_num) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| CryptoDevBackendSymOpInfo *op_info; |
| uint32_t src_len = 0, dst_len = 0; |
| uint32_t iv_len = 0; |
| uint32_t aad_len = 0, hash_result_len = 0; |
| uint32_t hash_start_src_offset = 0, len_to_hash = 0; |
| uint32_t cipher_start_src_offset = 0, len_to_cipher = 0; |
| |
| uint64_t max_len, curr_size = 0; |
| size_t s; |
| |
| /* Plain cipher */ |
| if (cipher_para) { |
| iv_len = ldl_le_p(&cipher_para->iv_len); |
| src_len = ldl_le_p(&cipher_para->src_data_len); |
| dst_len = ldl_le_p(&cipher_para->dst_data_len); |
| } else if (alg_chain_para) { /* Algorithm chain */ |
| iv_len = ldl_le_p(&alg_chain_para->iv_len); |
| src_len = ldl_le_p(&alg_chain_para->src_data_len); |
| dst_len = ldl_le_p(&alg_chain_para->dst_data_len); |
| |
| aad_len = ldl_le_p(&alg_chain_para->aad_len); |
| hash_result_len = ldl_le_p(&alg_chain_para->hash_result_len); |
| hash_start_src_offset = ldl_le_p( |
| &alg_chain_para->hash_start_src_offset); |
| cipher_start_src_offset = ldl_le_p( |
| &alg_chain_para->cipher_start_src_offset); |
| len_to_cipher = ldl_le_p(&alg_chain_para->len_to_cipher); |
| len_to_hash = ldl_le_p(&alg_chain_para->len_to_hash); |
| } else { |
| return NULL; |
| } |
| |
| max_len = (uint64_t)iv_len + aad_len + src_len + dst_len + hash_result_len; |
| if (unlikely(max_len > vcrypto->conf.max_size)) { |
| virtio_error(vdev, "virtio-crypto too big length"); |
| return NULL; |
| } |
| |
| op_info = g_malloc0(sizeof(CryptoDevBackendSymOpInfo) + max_len); |
| op_info->iv_len = iv_len; |
| op_info->src_len = src_len; |
| op_info->dst_len = dst_len; |
| op_info->aad_len = aad_len; |
| op_info->digest_result_len = hash_result_len; |
| op_info->hash_start_src_offset = hash_start_src_offset; |
| op_info->len_to_hash = len_to_hash; |
| op_info->cipher_start_src_offset = cipher_start_src_offset; |
| op_info->len_to_cipher = len_to_cipher; |
| /* Handle the initilization vector */ |
| if (op_info->iv_len > 0) { |
| DPRINTF("iv_len=%" PRIu32 "\n", op_info->iv_len); |
| op_info->iv = op_info->data + curr_size; |
| |
| s = iov_to_buf(iov, out_num, 0, op_info->iv, op_info->iv_len); |
| if (unlikely(s != op_info->iv_len)) { |
| virtio_error(vdev, "virtio-crypto iv incorrect"); |
| goto err; |
| } |
| iov_discard_front(&iov, &out_num, op_info->iv_len); |
| curr_size += op_info->iv_len; |
| } |
| |
| /* Handle additional authentication data if exists */ |
| if (op_info->aad_len > 0) { |
| DPRINTF("aad_len=%" PRIu32 "\n", op_info->aad_len); |
| op_info->aad_data = op_info->data + curr_size; |
| |
| s = iov_to_buf(iov, out_num, 0, op_info->aad_data, op_info->aad_len); |
| if (unlikely(s != op_info->aad_len)) { |
| virtio_error(vdev, "virtio-crypto additional auth data incorrect"); |
| goto err; |
| } |
| iov_discard_front(&iov, &out_num, op_info->aad_len); |
| |
| curr_size += op_info->aad_len; |
| } |
| |
| /* Handle the source data */ |
| if (op_info->src_len > 0) { |
| DPRINTF("src_len=%" PRIu32 "\n", op_info->src_len); |
| op_info->src = op_info->data + curr_size; |
| |
| s = iov_to_buf(iov, out_num, 0, op_info->src, op_info->src_len); |
| if (unlikely(s != op_info->src_len)) { |
| virtio_error(vdev, "virtio-crypto source data incorrect"); |
| goto err; |
| } |
| iov_discard_front(&iov, &out_num, op_info->src_len); |
| |
| curr_size += op_info->src_len; |
| } |
| |
| /* Handle the destination data */ |
| op_info->dst = op_info->data + curr_size; |
| curr_size += op_info->dst_len; |
| |
| DPRINTF("dst_len=%" PRIu32 "\n", op_info->dst_len); |
| |
| /* Handle the hash digest result */ |
| if (hash_result_len > 0) { |
| DPRINTF("hash_result_len=%" PRIu32 "\n", hash_result_len); |
| op_info->digest_result = op_info->data + curr_size; |
| } |
| |
| return op_info; |
| |
| err: |
| g_free(op_info); |
| return NULL; |
| } |
| |
| static int |
| virtio_crypto_handle_sym_req(VirtIOCrypto *vcrypto, |
| struct virtio_crypto_sym_data_req *req, |
| CryptoDevBackendSymOpInfo **sym_op_info, |
| struct iovec *iov, unsigned int out_num) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto); |
| uint32_t op_type; |
| CryptoDevBackendSymOpInfo *op_info; |
| |
| op_type = ldl_le_p(&req->op_type); |
| |
| if (op_type == VIRTIO_CRYPTO_SYM_OP_CIPHER) { |
| op_info = virtio_crypto_sym_op_helper(vdev, &req->u.cipher.para, |
| NULL, iov, out_num); |
| if (!op_info) { |
| return -EFAULT; |
| } |
| op_info->op_type = op_type; |
| } else if (op_type == VIRTIO_CRYPTO_SYM_OP_ALGORITHM_CHAINING) { |
| op_info = virtio_crypto_sym_op_helper(vdev, NULL, |
| &req->u.chain.para, |
| iov, out_num); |
| if (!op_info) { |
| return -EFAULT; |
| } |
| op_info->op_type = op_type; |
| } else { |
| /* VIRTIO_CRYPTO_SYM_OP_NONE */ |
| error_report("virtio-crypto unsupported cipher type"); |
| return -VIRTIO_CRYPTO_NOTSUPP; |
| } |
| |
| *sym_op_info = op_info; |
| |
| return 0; |
| } |
| |
| static int |
| virtio_crypto_handle_request(VirtIOCryptoReq *request) |
| { |
| VirtIOCrypto *vcrypto = request->vcrypto; |
| VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto); |
| VirtQueueElement *elem = &request->elem; |
| int queue_index = virtio_crypto_vq2q(virtio_get_queue_index(request->vq)); |
| struct virtio_crypto_op_data_req req; |
| int ret; |
| struct iovec *in_iov; |
| struct iovec *out_iov; |
| unsigned in_num; |
| unsigned out_num; |
| uint32_t opcode; |
| uint8_t status = VIRTIO_CRYPTO_ERR; |
| uint64_t session_id; |
| CryptoDevBackendSymOpInfo *sym_op_info = NULL; |
| Error *local_err = NULL; |
| |
| if (elem->out_num < 1 || elem->in_num < 1) { |
| virtio_error(vdev, "virtio-crypto dataq missing headers"); |
| return -1; |
| } |
| |
| out_num = elem->out_num; |
| out_iov = elem->out_sg; |
| in_num = elem->in_num; |
| in_iov = elem->in_sg; |
| if (unlikely(iov_to_buf(out_iov, out_num, 0, &req, sizeof(req)) |
| != sizeof(req))) { |
| virtio_error(vdev, "virtio-crypto request outhdr too short"); |
| return -1; |
| } |
| iov_discard_front(&out_iov, &out_num, sizeof(req)); |
| |
| if (in_iov[in_num - 1].iov_len < |
| sizeof(struct virtio_crypto_inhdr)) { |
| virtio_error(vdev, "virtio-crypto request inhdr too short"); |
| return -1; |
| } |
| /* We always touch the last byte, so just see how big in_iov is. */ |
| request->in_len = iov_size(in_iov, in_num); |
| request->in = (void *)in_iov[in_num - 1].iov_base |
| + in_iov[in_num - 1].iov_len |
| - sizeof(struct virtio_crypto_inhdr); |
| iov_discard_back(in_iov, &in_num, sizeof(struct virtio_crypto_inhdr)); |
| |
| /* |
| * The length of operation result, including dest_data |
| * and digest_result if exists. |
| */ |
| request->in_num = in_num; |
| request->in_iov = in_iov; |
| |
| opcode = ldl_le_p(&req.header.opcode); |
| session_id = ldq_le_p(&req.header.session_id); |
| |
| switch (opcode) { |
| case VIRTIO_CRYPTO_CIPHER_ENCRYPT: |
| case VIRTIO_CRYPTO_CIPHER_DECRYPT: |
| ret = virtio_crypto_handle_sym_req(vcrypto, |
| &req.u.sym_req, |
| &sym_op_info, |
| out_iov, out_num); |
| /* Serious errors, need to reset virtio crypto device */ |
| if (ret == -EFAULT) { |
| return -1; |
| } else if (ret == -VIRTIO_CRYPTO_NOTSUPP) { |
| virtio_crypto_req_complete(request, VIRTIO_CRYPTO_NOTSUPP); |
| virtio_crypto_free_request(request); |
| } else { |
| sym_op_info->session_id = session_id; |
| |
| /* Set request's parameter */ |
| request->flags = CRYPTODEV_BACKEND_ALG_SYM; |
| request->u.sym_op_info = sym_op_info; |
| ret = cryptodev_backend_crypto_operation(vcrypto->cryptodev, |
| request, queue_index, &local_err); |
| if (ret < 0) { |
| status = -ret; |
| if (local_err) { |
| error_report_err(local_err); |
| } |
| } else { /* ret == VIRTIO_CRYPTO_OK */ |
| status = ret; |
| } |
| virtio_crypto_req_complete(request, status); |
| virtio_crypto_free_request(request); |
| } |
| break; |
| case VIRTIO_CRYPTO_HASH: |
| case VIRTIO_CRYPTO_MAC: |
| case VIRTIO_CRYPTO_AEAD_ENCRYPT: |
| case VIRTIO_CRYPTO_AEAD_DECRYPT: |
| default: |
| error_report("virtio-crypto unsupported dataq opcode: %u", |
| opcode); |
| virtio_crypto_req_complete(request, VIRTIO_CRYPTO_NOTSUPP); |
| virtio_crypto_free_request(request); |
| } |
| |
| return 0; |
| } |
| |
| static void virtio_crypto_handle_dataq(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| VirtIOCryptoReq *req; |
| |
| while ((req = virtio_crypto_get_request(vcrypto, vq))) { |
| if (virtio_crypto_handle_request(req) < 0) { |
| virtqueue_detach_element(req->vq, &req->elem, 0); |
| virtio_crypto_free_request(req); |
| break; |
| } |
| } |
| } |
| |
| static void virtio_crypto_dataq_bh(void *opaque) |
| { |
| VirtIOCryptoQueue *q = opaque; |
| VirtIOCrypto *vcrypto = q->vcrypto; |
| VirtIODevice *vdev = VIRTIO_DEVICE(vcrypto); |
| |
| /* This happens when device was stopped but BH wasn't. */ |
| if (!vdev->vm_running) { |
| return; |
| } |
| |
| /* Just in case the driver is not ready on more */ |
| if (unlikely(!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK))) { |
| return; |
| } |
| |
| for (;;) { |
| virtio_crypto_handle_dataq(vdev, q->dataq); |
| virtio_queue_set_notification(q->dataq, 1); |
| |
| /* Are we done or did the guest add more buffers? */ |
| if (virtio_queue_empty(q->dataq)) { |
| break; |
| } |
| |
| virtio_queue_set_notification(q->dataq, 0); |
| } |
| } |
| |
| static void |
| virtio_crypto_handle_dataq_bh(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| VirtIOCryptoQueue *q = |
| &vcrypto->vqs[virtio_crypto_vq2q(virtio_get_queue_index(vq))]; |
| |
| /* This happens when device was stopped but VCPU wasn't. */ |
| if (!vdev->vm_running) { |
| return; |
| } |
| virtio_queue_set_notification(vq, 0); |
| qemu_bh_schedule(q->dataq_bh); |
| } |
| |
| static uint64_t virtio_crypto_get_features(VirtIODevice *vdev, |
| uint64_t features, |
| Error **errp) |
| { |
| return features; |
| } |
| |
| static void virtio_crypto_reset(VirtIODevice *vdev) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| /* multiqueue is disabled by default */ |
| vcrypto->curr_queues = 1; |
| if (!cryptodev_backend_is_ready(vcrypto->cryptodev)) { |
| vcrypto->status &= ~VIRTIO_CRYPTO_S_HW_READY; |
| } else { |
| vcrypto->status |= VIRTIO_CRYPTO_S_HW_READY; |
| } |
| } |
| |
| static void virtio_crypto_init_config(VirtIODevice *vdev) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(vdev); |
| |
| vcrypto->conf.crypto_services = |
| vcrypto->conf.cryptodev->conf.crypto_services; |
| vcrypto->conf.cipher_algo_l = |
| vcrypto->conf.cryptodev->conf.cipher_algo_l; |
| vcrypto->conf.cipher_algo_h = |
| vcrypto->conf.cryptodev->conf.cipher_algo_h; |
| vcrypto->conf.hash_algo = vcrypto->conf.cryptodev->conf.hash_algo; |
| vcrypto->conf.mac_algo_l = vcrypto->conf.cryptodev->conf.mac_algo_l; |
| vcrypto->conf.mac_algo_h = vcrypto->conf.cryptodev->conf.mac_algo_h; |
| vcrypto->conf.aead_algo = vcrypto->conf.cryptodev->conf.aead_algo; |
| vcrypto->conf.max_cipher_key_len = |
| vcrypto->conf.cryptodev->conf.max_cipher_key_len; |
| vcrypto->conf.max_auth_key_len = |
| vcrypto->conf.cryptodev->conf.max_auth_key_len; |
| vcrypto->conf.max_size = vcrypto->conf.cryptodev->conf.max_size; |
| } |
| |
| static void virtio_crypto_device_realize(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev); |
| int i; |
| |
| vcrypto->cryptodev = vcrypto->conf.cryptodev; |
| if (vcrypto->cryptodev == NULL) { |
| error_setg(errp, "'cryptodev' parameter expects a valid object"); |
| return; |
| } |
| |
| vcrypto->max_queues = MAX(vcrypto->cryptodev->conf.peers.queues, 1); |
| if (vcrypto->max_queues + 1 > VIRTIO_QUEUE_MAX) { |
| error_setg(errp, "Invalid number of queues (= %" PRIu32 "), " |
| "must be a postive integer less than %d.", |
| vcrypto->max_queues, VIRTIO_QUEUE_MAX); |
| return; |
| } |
| |
| virtio_init(vdev, "virtio-crypto", VIRTIO_ID_CRYPTO, vcrypto->config_size); |
| vcrypto->curr_queues = 1; |
| vcrypto->vqs = g_malloc0(sizeof(VirtIOCryptoQueue) * vcrypto->max_queues); |
| for (i = 0; i < vcrypto->max_queues; i++) { |
| vcrypto->vqs[i].dataq = |
| virtio_add_queue(vdev, 1024, virtio_crypto_handle_dataq_bh); |
| vcrypto->vqs[i].dataq_bh = |
| qemu_bh_new(virtio_crypto_dataq_bh, &vcrypto->vqs[i]); |
| vcrypto->vqs[i].vcrypto = vcrypto; |
| } |
| |
| vcrypto->ctrl_vq = virtio_add_queue(vdev, 64, virtio_crypto_handle_ctrl); |
| if (!cryptodev_backend_is_ready(vcrypto->cryptodev)) { |
| vcrypto->status &= ~VIRTIO_CRYPTO_S_HW_READY; |
| } else { |
| vcrypto->status |= VIRTIO_CRYPTO_S_HW_READY; |
| } |
| |
| virtio_crypto_init_config(vdev); |
| cryptodev_backend_set_used(vcrypto->cryptodev, true); |
| } |
| |
| static void virtio_crypto_device_unrealize(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(dev); |
| VirtIOCryptoQueue *q; |
| int i, max_queues; |
| |
| max_queues = vcrypto->multiqueue ? vcrypto->max_queues : 1; |
| for (i = 0; i < max_queues; i++) { |
| virtio_del_queue(vdev, i); |
| q = &vcrypto->vqs[i]; |
| qemu_bh_delete(q->dataq_bh); |
| } |
| |
| g_free(vcrypto->vqs); |
| |
| virtio_cleanup(vdev); |
| cryptodev_backend_set_used(vcrypto->cryptodev, false); |
| } |
| |
| static const VMStateDescription vmstate_virtio_crypto = { |
| .name = "virtio-crypto", |
| .unmigratable = 1, |
| .minimum_version_id = VIRTIO_CRYPTO_VM_VERSION, |
| .version_id = VIRTIO_CRYPTO_VM_VERSION, |
| .fields = (VMStateField[]) { |
| VMSTATE_VIRTIO_DEVICE, |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static Property virtio_crypto_properties[] = { |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void virtio_crypto_get_config(VirtIODevice *vdev, uint8_t *config) |
| { |
| VirtIOCrypto *c = VIRTIO_CRYPTO(vdev); |
| struct virtio_crypto_config crypto_cfg = {}; |
| |
| /* |
| * Virtio-crypto device conforms to VIRTIO 1.0 which is always LE, |
| * so we can use LE accessors directly. |
| */ |
| stl_le_p(&crypto_cfg.status, c->status); |
| stl_le_p(&crypto_cfg.max_dataqueues, c->max_queues); |
| stl_le_p(&crypto_cfg.crypto_services, c->conf.crypto_services); |
| stl_le_p(&crypto_cfg.cipher_algo_l, c->conf.cipher_algo_l); |
| stl_le_p(&crypto_cfg.cipher_algo_h, c->conf.cipher_algo_h); |
| stl_le_p(&crypto_cfg.hash_algo, c->conf.hash_algo); |
| stl_le_p(&crypto_cfg.mac_algo_l, c->conf.mac_algo_l); |
| stl_le_p(&crypto_cfg.mac_algo_h, c->conf.mac_algo_h); |
| stl_le_p(&crypto_cfg.aead_algo, c->conf.aead_algo); |
| stl_le_p(&crypto_cfg.max_cipher_key_len, c->conf.max_cipher_key_len); |
| stl_le_p(&crypto_cfg.max_auth_key_len, c->conf.max_auth_key_len); |
| stq_le_p(&crypto_cfg.max_size, c->conf.max_size); |
| |
| memcpy(config, &crypto_cfg, c->config_size); |
| } |
| |
| static void virtio_crypto_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| |
| dc->props = virtio_crypto_properties; |
| dc->vmsd = &vmstate_virtio_crypto; |
| set_bit(DEVICE_CATEGORY_MISC, dc->categories); |
| vdc->realize = virtio_crypto_device_realize; |
| vdc->unrealize = virtio_crypto_device_unrealize; |
| vdc->get_config = virtio_crypto_get_config; |
| vdc->get_features = virtio_crypto_get_features; |
| vdc->reset = virtio_crypto_reset; |
| } |
| |
| static void |
| virtio_crypto_check_cryptodev_is_used(Object *obj, const char *name, |
| Object *val, Error **errp) |
| { |
| if (cryptodev_backend_is_used(CRYPTODEV_BACKEND(val))) { |
| char *path = object_get_canonical_path_component(val); |
| error_setg(errp, |
| "can't use already used cryptodev backend: %s", path); |
| g_free(path); |
| } else { |
| qdev_prop_allow_set_link_before_realize(obj, name, val, errp); |
| } |
| } |
| |
| static void virtio_crypto_instance_init(Object *obj) |
| { |
| VirtIOCrypto *vcrypto = VIRTIO_CRYPTO(obj); |
| |
| /* |
| * The default config_size is sizeof(struct virtio_crypto_config). |
| * Can be overriden with virtio_crypto_set_config_size. |
| */ |
| vcrypto->config_size = sizeof(struct virtio_crypto_config); |
| |
| object_property_add_link(obj, "cryptodev", |
| TYPE_CRYPTODEV_BACKEND, |
| (Object **)&vcrypto->conf.cryptodev, |
| virtio_crypto_check_cryptodev_is_used, |
| OBJ_PROP_LINK_UNREF_ON_RELEASE, NULL); |
| } |
| |
| static const TypeInfo virtio_crypto_info = { |
| .name = TYPE_VIRTIO_CRYPTO, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VirtIOCrypto), |
| .instance_init = virtio_crypto_instance_init, |
| .class_init = virtio_crypto_class_init, |
| }; |
| |
| static void virtio_register_types(void) |
| { |
| type_register_static(&virtio_crypto_info); |
| } |
| |
| type_init(virtio_register_types) |