| /* |
| * Logging support |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu-common.h" |
| #include "qemu/log.h" |
| #include "qemu/range.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "qemu/cutils.h" |
| #include "trace/control.h" |
| |
| static char *logfilename; |
| FILE *qemu_logfile; |
| int qemu_loglevel; |
| static int log_append = 0; |
| static GArray *debug_regions; |
| |
| void qemu_log(const char *fmt, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, fmt); |
| if (qemu_logfile) { |
| vfprintf(qemu_logfile, fmt, ap); |
| } |
| va_end(ap); |
| } |
| |
| static bool log_uses_own_buffers; |
| |
| /* enable or disable low levels log */ |
| void qemu_set_log(int log_flags) |
| { |
| qemu_loglevel = log_flags; |
| #ifdef CONFIG_TRACE_LOG |
| qemu_loglevel |= LOG_TRACE; |
| #endif |
| if (!qemu_logfile && |
| (is_daemonized() ? logfilename != NULL : qemu_loglevel)) { |
| if (logfilename) { |
| qemu_logfile = fopen(logfilename, log_append ? "a" : "w"); |
| if (!qemu_logfile) { |
| perror(logfilename); |
| _exit(1); |
| } |
| /* In case we are a daemon redirect stderr to logfile */ |
| if (is_daemonized()) { |
| dup2(fileno(qemu_logfile), STDERR_FILENO); |
| fclose(qemu_logfile); |
| /* This will skip closing logfile in qemu_log_close() */ |
| qemu_logfile = stderr; |
| } |
| } else { |
| /* Default to stderr if no log file specified */ |
| assert(!is_daemonized()); |
| qemu_logfile = stderr; |
| } |
| /* must avoid mmap() usage of glibc by setting a buffer "by hand" */ |
| if (log_uses_own_buffers) { |
| static char logfile_buf[4096]; |
| |
| setvbuf(qemu_logfile, logfile_buf, _IOLBF, sizeof(logfile_buf)); |
| } else { |
| #if defined(_WIN32) |
| /* Win32 doesn't support line-buffering, so use unbuffered output. */ |
| setvbuf(qemu_logfile, NULL, _IONBF, 0); |
| #else |
| setvbuf(qemu_logfile, NULL, _IOLBF, 0); |
| #endif |
| log_append = 1; |
| } |
| } |
| if (qemu_logfile && |
| (is_daemonized() ? logfilename == NULL : !qemu_loglevel)) { |
| qemu_log_close(); |
| } |
| } |
| |
| void qemu_log_needs_buffers(void) |
| { |
| log_uses_own_buffers = true; |
| } |
| |
| /* |
| * Allow the user to include %d in their logfile which will be |
| * substituted with the current PID. This is useful for debugging many |
| * nested linux-user tasks but will result in lots of logs. |
| */ |
| void qemu_set_log_filename(const char *filename, Error **errp) |
| { |
| char *pidstr; |
| g_free(logfilename); |
| |
| pidstr = strstr(filename, "%"); |
| if (pidstr) { |
| /* We only accept one %d, no other format strings */ |
| if (pidstr[1] != 'd' || strchr(pidstr + 2, '%')) { |
| error_setg(errp, "Bad logfile format: %s", filename); |
| return; |
| } else { |
| logfilename = g_strdup_printf(filename, getpid()); |
| } |
| } else { |
| logfilename = g_strdup(filename); |
| } |
| qemu_log_close(); |
| qemu_set_log(qemu_loglevel); |
| } |
| |
| /* Returns true if addr is in our debug filter or no filter defined |
| */ |
| bool qemu_log_in_addr_range(uint64_t addr) |
| { |
| if (debug_regions) { |
| int i = 0; |
| for (i = 0; i < debug_regions->len; i++) { |
| Range *range = &g_array_index(debug_regions, Range, i); |
| if (addr >= range->begin && addr <= range->end - 1) { |
| return true; |
| } |
| } |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| |
| void qemu_set_dfilter_ranges(const char *filter_spec, Error **errp) |
| { |
| gchar **ranges = g_strsplit(filter_spec, ",", 0); |
| int i; |
| |
| if (debug_regions) { |
| g_array_unref(debug_regions); |
| debug_regions = NULL; |
| } |
| |
| debug_regions = g_array_sized_new(FALSE, FALSE, |
| sizeof(Range), g_strv_length(ranges)); |
| for (i = 0; ranges[i]; i++) { |
| const char *r = ranges[i]; |
| const char *range_op, *r2, *e; |
| uint64_t r1val, r2val, lob, upb; |
| struct Range range; |
| |
| range_op = strstr(r, "-"); |
| r2 = range_op ? range_op + 1 : NULL; |
| if (!range_op) { |
| range_op = strstr(r, "+"); |
| r2 = range_op ? range_op + 1 : NULL; |
| } |
| if (!range_op) { |
| range_op = strstr(r, ".."); |
| r2 = range_op ? range_op + 2 : NULL; |
| } |
| if (!range_op) { |
| error_setg(errp, "Bad range specifier"); |
| goto out; |
| } |
| |
| if (qemu_strtoull(r, &e, 0, &r1val) |
| || e != range_op) { |
| error_setg(errp, "Invalid number to the left of %.*s", |
| (int)(r2 - range_op), range_op); |
| goto out; |
| } |
| if (qemu_strtoull(r2, NULL, 0, &r2val)) { |
| error_setg(errp, "Invalid number to the right of %.*s", |
| (int)(r2 - range_op), range_op); |
| goto out; |
| } |
| |
| switch (*range_op) { |
| case '+': |
| lob = r1val; |
| upb = r1val + r2val - 1; |
| break; |
| case '-': |
| upb = r1val; |
| lob = r1val - (r2val - 1); |
| break; |
| case '.': |
| lob = r1val; |
| upb = r2val; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| if (lob > upb || (lob == 0 && upb == UINT64_MAX)) { |
| error_setg(errp, "Invalid range"); |
| goto out; |
| } |
| range.begin = lob; |
| range.end = upb + 1; |
| g_array_append_val(debug_regions, range); |
| } |
| out: |
| g_strfreev(ranges); |
| } |
| |
| /* fflush() the log file */ |
| void qemu_log_flush(void) |
| { |
| fflush(qemu_logfile); |
| } |
| |
| /* Close the log file */ |
| void qemu_log_close(void) |
| { |
| if (qemu_logfile) { |
| if (qemu_logfile != stderr) { |
| fclose(qemu_logfile); |
| } |
| qemu_logfile = NULL; |
| } |
| } |
| |
| const QEMULogItem qemu_log_items[] = { |
| { CPU_LOG_TB_OUT_ASM, "out_asm", |
| "show generated host assembly code for each compiled TB" }, |
| { CPU_LOG_TB_IN_ASM, "in_asm", |
| "show target assembly code for each compiled TB" }, |
| { CPU_LOG_TB_OP, "op", |
| "show micro ops for each compiled TB" }, |
| { CPU_LOG_TB_OP_OPT, "op_opt", |
| "show micro ops (x86 only: before eflags optimization) and\n" |
| "after liveness analysis" }, |
| { CPU_LOG_INT, "int", |
| "show interrupts/exceptions in short format" }, |
| { CPU_LOG_EXEC, "exec", |
| "show trace before each executed TB (lots of logs)" }, |
| { CPU_LOG_TB_CPU, "cpu", |
| "show CPU registers before entering a TB (lots of logs)" }, |
| { CPU_LOG_MMU, "mmu", |
| "log MMU-related activities" }, |
| { CPU_LOG_PCALL, "pcall", |
| "x86 only: show protected mode far calls/returns/exceptions" }, |
| { CPU_LOG_RESET, "cpu_reset", |
| "show CPU state before CPU resets" }, |
| { LOG_UNIMP, "unimp", |
| "log unimplemented functionality" }, |
| { LOG_GUEST_ERROR, "guest_errors", |
| "log when the guest OS does something invalid (eg accessing a\n" |
| "non-existent register)" }, |
| { CPU_LOG_PAGE, "page", |
| "dump pages at beginning of user mode emulation" }, |
| { CPU_LOG_TB_NOCHAIN, "nochain", |
| "do not chain compiled TBs so that \"exec\" and \"cpu\" show\n" |
| "complete traces" }, |
| { 0, NULL, NULL }, |
| }; |
| |
| static int cmp1(const char *s1, int n, const char *s2) |
| { |
| if (strlen(s2) != n) { |
| return 0; |
| } |
| return memcmp(s1, s2, n) == 0; |
| } |
| |
| /* takes a comma separated list of log masks. Return 0 if error. */ |
| int qemu_str_to_log_mask(const char *str) |
| { |
| const QEMULogItem *item; |
| int mask; |
| const char *p, *p1; |
| |
| p = str; |
| mask = 0; |
| for (;;) { |
| p1 = strchr(p, ','); |
| if (!p1) { |
| p1 = p + strlen(p); |
| } |
| if (cmp1(p,p1-p,"all")) { |
| for (item = qemu_log_items; item->mask != 0; item++) { |
| mask |= item->mask; |
| } |
| #ifdef CONFIG_TRACE_LOG |
| } else if (strncmp(p, "trace:", 6) == 0 && p + 6 != p1) { |
| trace_enable_events(p + 6); |
| mask |= LOG_TRACE; |
| #endif |
| } else { |
| for (item = qemu_log_items; item->mask != 0; item++) { |
| if (cmp1(p, p1 - p, item->name)) { |
| goto found; |
| } |
| } |
| return 0; |
| found: |
| mask |= item->mask; |
| } |
| if (*p1 != ',') { |
| break; |
| } |
| p = p1 + 1; |
| } |
| return mask; |
| } |
| |
| void qemu_print_log_usage(FILE *f) |
| { |
| const QEMULogItem *item; |
| fprintf(f, "Log items (comma separated):\n"); |
| for (item = qemu_log_items; item->mask != 0; item++) { |
| fprintf(f, "%-15s %s\n", item->name, item->help); |
| } |
| #ifdef CONFIG_TRACE_LOG |
| fprintf(f, "trace:PATTERN enable trace events\n"); |
| fprintf(f, "\nUse \"-d trace:help\" to get a list of trace events.\n\n"); |
| #endif |
| } |