| /* |
| * IMX EPIT Timer |
| * |
| * Copyright (c) 2008 OK Labs |
| * Copyright (c) 2011 NICTA Pty Ltd |
| * Originally written by Hans Jiang |
| * Updated by Peter Chubb |
| * Updated by Jean-Christophe Dubois |
| * |
| * This code is licensed under GPL version 2 or later. See |
| * the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "hw/hw.h" |
| #include "qemu/bitops.h" |
| #include "qemu/timer.h" |
| #include "hw/ptimer.h" |
| #include "hw/sysbus.h" |
| #include "hw/arm/imx.h" |
| #include "qemu/main-loop.h" |
| |
| #define TYPE_IMX_EPIT "imx.epit" |
| |
| #define DEBUG_TIMER 0 |
| #if DEBUG_TIMER |
| |
| static char const *imx_epit_reg_name(uint32_t reg) |
| { |
| switch (reg) { |
| case 0: |
| return "CR"; |
| case 1: |
| return "SR"; |
| case 2: |
| return "LR"; |
| case 3: |
| return "CMP"; |
| case 4: |
| return "CNT"; |
| default: |
| return "[?]"; |
| } |
| } |
| |
| # define DPRINTF(fmt, args...) \ |
| do { fprintf(stderr, "%s: " fmt , __func__, ##args); } while (0) |
| #else |
| # define DPRINTF(fmt, args...) do {} while (0) |
| #endif |
| |
| /* |
| * Define to 1 for messages about attempts to |
| * access unimplemented registers or similar. |
| */ |
| #define DEBUG_IMPLEMENTATION 1 |
| #if DEBUG_IMPLEMENTATION |
| # define IPRINTF(fmt, args...) \ |
| do { fprintf(stderr, "%s: " fmt, __func__, ##args); } while (0) |
| #else |
| # define IPRINTF(fmt, args...) do {} while (0) |
| #endif |
| |
| #define IMX_EPIT(obj) \ |
| OBJECT_CHECK(IMXEPITState, (obj), TYPE_IMX_EPIT) |
| |
| /* |
| * EPIT: Enhanced periodic interrupt timer |
| */ |
| |
| #define CR_EN (1 << 0) |
| #define CR_ENMOD (1 << 1) |
| #define CR_OCIEN (1 << 2) |
| #define CR_RLD (1 << 3) |
| #define CR_PRESCALE_SHIFT (4) |
| #define CR_PRESCALE_MASK (0xfff) |
| #define CR_SWR (1 << 16) |
| #define CR_IOVW (1 << 17) |
| #define CR_DBGEN (1 << 18) |
| #define CR_WAITEN (1 << 19) |
| #define CR_DOZEN (1 << 20) |
| #define CR_STOPEN (1 << 21) |
| #define CR_CLKSRC_SHIFT (24) |
| #define CR_CLKSRC_MASK (0x3 << CR_CLKSRC_SHIFT) |
| |
| #define TIMER_MAX 0XFFFFFFFFUL |
| |
| /* |
| * Exact clock frequencies vary from board to board. |
| * These are typical. |
| */ |
| static const IMXClk imx_epit_clocks[] = { |
| 0, /* 00 disabled */ |
| IPG, /* 01 ipg_clk, ~532MHz */ |
| IPG, /* 10 ipg_clk_highfreq */ |
| CLK_32k, /* 11 ipg_clk_32k -- ~32kHz */ |
| }; |
| |
| typedef struct { |
| SysBusDevice busdev; |
| ptimer_state *timer_reload; |
| ptimer_state *timer_cmp; |
| MemoryRegion iomem; |
| DeviceState *ccm; |
| |
| uint32_t cr; |
| uint32_t sr; |
| uint32_t lr; |
| uint32_t cmp; |
| uint32_t cnt; |
| |
| uint32_t freq; |
| qemu_irq irq; |
| } IMXEPITState; |
| |
| /* |
| * Update interrupt status |
| */ |
| static void imx_epit_update_int(IMXEPITState *s) |
| { |
| if (s->sr && (s->cr & CR_OCIEN) && (s->cr & CR_EN)) { |
| qemu_irq_raise(s->irq); |
| } else { |
| qemu_irq_lower(s->irq); |
| } |
| } |
| |
| static void imx_epit_set_freq(IMXEPITState *s) |
| { |
| uint32_t clksrc; |
| uint32_t prescaler; |
| uint32_t freq; |
| |
| clksrc = extract32(s->cr, CR_CLKSRC_SHIFT, 2); |
| prescaler = 1 + extract32(s->cr, CR_PRESCALE_SHIFT, 12); |
| |
| freq = imx_clock_frequency(s->ccm, imx_epit_clocks[clksrc]) / prescaler; |
| |
| s->freq = freq; |
| |
| DPRINTF("Setting ptimer frequency to %u\n", freq); |
| |
| if (freq) { |
| ptimer_set_freq(s->timer_reload, freq); |
| ptimer_set_freq(s->timer_cmp, freq); |
| } |
| } |
| |
| static void imx_epit_reset(DeviceState *dev) |
| { |
| IMXEPITState *s = IMX_EPIT(dev); |
| |
| /* |
| * Soft reset doesn't touch some bits; hard reset clears them |
| */ |
| s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); |
| s->sr = 0; |
| s->lr = TIMER_MAX; |
| s->cmp = 0; |
| s->cnt = 0; |
| /* stop both timers */ |
| ptimer_stop(s->timer_cmp); |
| ptimer_stop(s->timer_reload); |
| /* compute new frequency */ |
| imx_epit_set_freq(s); |
| /* init both timers to TIMER_MAX */ |
| ptimer_set_limit(s->timer_cmp, TIMER_MAX, 1); |
| ptimer_set_limit(s->timer_reload, TIMER_MAX, 1); |
| if (s->freq && (s->cr & CR_EN)) { |
| /* if the timer is still enabled, restart it */ |
| ptimer_run(s->timer_reload, 0); |
| } |
| } |
| |
| static uint32_t imx_epit_update_count(IMXEPITState *s) |
| { |
| s->cnt = ptimer_get_count(s->timer_reload); |
| |
| return s->cnt; |
| } |
| |
| static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| IMXEPITState *s = IMX_EPIT(opaque); |
| uint32_t reg_value = 0; |
| uint32_t reg = offset >> 2; |
| |
| switch (reg) { |
| case 0: /* Control Register */ |
| reg_value = s->cr; |
| break; |
| |
| case 1: /* Status Register */ |
| reg_value = s->sr; |
| break; |
| |
| case 2: /* LR - ticks*/ |
| reg_value = s->lr; |
| break; |
| |
| case 3: /* CMP */ |
| reg_value = s->cmp; |
| break; |
| |
| case 4: /* CNT */ |
| imx_epit_update_count(s); |
| reg_value = s->cnt; |
| break; |
| |
| default: |
| IPRINTF("Bad offset %x\n", reg); |
| break; |
| } |
| |
| DPRINTF("(%s) = 0x%08x\n", imx_epit_reg_name(reg), reg_value); |
| |
| return reg_value; |
| } |
| |
| static void imx_epit_reload_compare_timer(IMXEPITState *s) |
| { |
| if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { |
| /* if the compare feature is on and timers are running */ |
| uint32_t tmp = imx_epit_update_count(s); |
| uint64_t next; |
| if (tmp > s->cmp) { |
| /* It'll fire in this round of the timer */ |
| next = tmp - s->cmp; |
| } else { /* catch it next time around */ |
| next = tmp - s->cmp + ((s->cr & CR_RLD) ? TIMER_MAX : s->lr); |
| } |
| ptimer_set_count(s->timer_cmp, next); |
| } |
| } |
| |
| static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| IMXEPITState *s = IMX_EPIT(opaque); |
| uint32_t reg = offset >> 2; |
| uint64_t oldcr; |
| |
| DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(reg), (uint32_t)value); |
| |
| switch (reg) { |
| case 0: /* CR */ |
| |
| oldcr = s->cr; |
| s->cr = value & 0x03ffffff; |
| if (s->cr & CR_SWR) { |
| /* handle the reset */ |
| imx_epit_reset(DEVICE(s)); |
| } else { |
| imx_epit_set_freq(s); |
| } |
| |
| if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { |
| if (s->cr & CR_ENMOD) { |
| if (s->cr & CR_RLD) { |
| ptimer_set_limit(s->timer_reload, s->lr, 1); |
| ptimer_set_limit(s->timer_cmp, s->lr, 1); |
| } else { |
| ptimer_set_limit(s->timer_reload, TIMER_MAX, 1); |
| ptimer_set_limit(s->timer_cmp, TIMER_MAX, 1); |
| } |
| } |
| |
| imx_epit_reload_compare_timer(s); |
| ptimer_run(s->timer_reload, 0); |
| if (s->cr & CR_OCIEN) { |
| ptimer_run(s->timer_cmp, 0); |
| } else { |
| ptimer_stop(s->timer_cmp); |
| } |
| } else if (!(s->cr & CR_EN)) { |
| /* stop both timers */ |
| ptimer_stop(s->timer_reload); |
| ptimer_stop(s->timer_cmp); |
| } else if (s->cr & CR_OCIEN) { |
| if (!(oldcr & CR_OCIEN)) { |
| imx_epit_reload_compare_timer(s); |
| ptimer_run(s->timer_cmp, 0); |
| } |
| } else { |
| ptimer_stop(s->timer_cmp); |
| } |
| break; |
| |
| case 1: /* SR - ACK*/ |
| /* writing 1 to OCIF clear the OCIF bit */ |
| if (value & 0x01) { |
| s->sr = 0; |
| imx_epit_update_int(s); |
| } |
| break; |
| |
| case 2: /* LR - set ticks */ |
| s->lr = value; |
| |
| if (s->cr & CR_RLD) { |
| /* Also set the limit if the LRD bit is set */ |
| /* If IOVW bit is set then set the timer value */ |
| ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); |
| ptimer_set_limit(s->timer_cmp, s->lr, 0); |
| } else if (s->cr & CR_IOVW) { |
| /* If IOVW bit is set then set the timer value */ |
| ptimer_set_count(s->timer_reload, s->lr); |
| } |
| |
| imx_epit_reload_compare_timer(s); |
| break; |
| |
| case 3: /* CMP */ |
| s->cmp = value; |
| |
| imx_epit_reload_compare_timer(s); |
| |
| break; |
| |
| default: |
| IPRINTF("Bad offset %x\n", reg); |
| |
| break; |
| } |
| } |
| static void imx_epit_cmp(void *opaque) |
| { |
| IMXEPITState *s = IMX_EPIT(opaque); |
| |
| DPRINTF("sr was %d\n", s->sr); |
| |
| s->sr = 1; |
| imx_epit_update_int(s); |
| } |
| |
| void imx_timerp_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm) |
| { |
| IMXEPITState *pp; |
| DeviceState *dev; |
| |
| dev = sysbus_create_simple(TYPE_IMX_EPIT, addr, irq); |
| pp = IMX_EPIT(dev); |
| pp->ccm = ccm; |
| } |
| |
| static const MemoryRegionOps imx_epit_ops = { |
| .read = imx_epit_read, |
| .write = imx_epit_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static const VMStateDescription vmstate_imx_timer_epit = { |
| .name = "imx.epit", |
| .version_id = 2, |
| .minimum_version_id = 2, |
| .minimum_version_id_old = 2, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(cr, IMXEPITState), |
| VMSTATE_UINT32(sr, IMXEPITState), |
| VMSTATE_UINT32(lr, IMXEPITState), |
| VMSTATE_UINT32(cmp, IMXEPITState), |
| VMSTATE_UINT32(cnt, IMXEPITState), |
| VMSTATE_UINT32(freq, IMXEPITState), |
| VMSTATE_PTIMER(timer_reload, IMXEPITState), |
| VMSTATE_PTIMER(timer_cmp, IMXEPITState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void imx_epit_realize(DeviceState *dev, Error **errp) |
| { |
| IMXEPITState *s = IMX_EPIT(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| QEMUBH *bh; |
| |
| DPRINTF("\n"); |
| |
| sysbus_init_irq(sbd, &s->irq); |
| memory_region_init_io(&s->iomem, OBJECT(s), &imx_epit_ops, s, TYPE_IMX_EPIT, |
| 0x00001000); |
| sysbus_init_mmio(sbd, &s->iomem); |
| |
| s->timer_reload = ptimer_init(NULL); |
| |
| bh = qemu_bh_new(imx_epit_cmp, s); |
| s->timer_cmp = ptimer_init(bh); |
| } |
| |
| static void imx_epit_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = imx_epit_realize; |
| dc->reset = imx_epit_reset; |
| dc->vmsd = &vmstate_imx_timer_epit; |
| dc->desc = "i.MX periodic timer"; |
| } |
| |
| static const TypeInfo imx_epit_info = { |
| .name = TYPE_IMX_EPIT, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(IMXEPITState), |
| .class_init = imx_epit_class_init, |
| }; |
| |
| static void imx_epit_register_types(void) |
| { |
| type_register_static(&imx_epit_info); |
| } |
| |
| type_init(imx_epit_register_types) |