hw/timer/exynos4210_mct: Cleanup indentation and empty new lines
Statements under 'case' were in some places wrongly indented bringing
confusion and making the code less readable. Remove also few unneeded
blank lines. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
diff --git a/hw/timer/exynos4210_mct.c b/hw/timer/exynos4210_mct.c
index 2404fb7..ea5f99d 100644
--- a/hw/timer/exynos4210_mct.c
+++ b/hw/timer/exynos4210_mct.c
@@ -1016,9 +1016,9 @@
case G_COMP_L(0): case G_COMP_L(1): case G_COMP_L(2): case G_COMP_L(3):
case G_COMP_U(0): case G_COMP_U(1): case G_COMP_U(2): case G_COMP_U(3):
- index = GET_G_COMP_IDX(offset);
- shift = 8 * (offset & 0x4);
- value = UINT32_MAX & (s->g_timer.reg.comp[index] >> shift);
+ index = GET_G_COMP_IDX(offset);
+ shift = 8 * (offset & 0x4);
+ value = UINT32_MAX & (s->g_timer.reg.comp[index] >> shift);
break;
case G_TCON:
@@ -1067,7 +1067,6 @@
lt_i = GET_L_TIMER_IDX(offset);
value = exynos4210_lfrc_get_count(&s->l_timer[lt_i]);
-
break;
case L0_TCON: case L1_TCON:
@@ -1153,23 +1152,23 @@
case G_COMP_L(0): case G_COMP_L(1): case G_COMP_L(2): case G_COMP_L(3):
case G_COMP_U(0): case G_COMP_U(1): case G_COMP_U(2): case G_COMP_U(3):
- index = GET_G_COMP_IDX(offset);
- shift = 8 * (offset & 0x4);
- s->g_timer.reg.comp[index] =
- (s->g_timer.reg.comp[index] &
- (((uint64_t)UINT32_MAX << 32) >> shift)) +
- (value << shift);
+ index = GET_G_COMP_IDX(offset);
+ shift = 8 * (offset & 0x4);
+ s->g_timer.reg.comp[index] =
+ (s->g_timer.reg.comp[index] &
+ (((uint64_t)UINT32_MAX << 32) >> shift)) +
+ (value << shift);
- DPRINTF("comparator %d write 0x%llx val << %d\n", index, value, shift);
+ DPRINTF("comparator %d write 0x%llx val << %d\n", index, value, shift);
- if (offset & 0x4) {
- s->g_timer.reg.wstat |= G_WSTAT_COMP_U(index);
- } else {
- s->g_timer.reg.wstat |= G_WSTAT_COMP_L(index);
- }
+ if (offset & 0x4) {
+ s->g_timer.reg.wstat |= G_WSTAT_COMP_U(index);
+ } else {
+ s->g_timer.reg.wstat |= G_WSTAT_COMP_L(index);
+ }
- exynos4210_gfrc_restart(s);
- break;
+ exynos4210_gfrc_restart(s);
+ break;
case G_TCON:
old_val = s->g_timer.reg.tcon;
@@ -1207,7 +1206,6 @@
break;
case G_INT_ENB:
-
/* Raise IRQ if transition from disabled to enabled and CSTAT pending */
for (i = 0; i < MCT_GT_CMP_NUM; i++) {
if ((value & G_INT_ENABLE(i)) > (s->g_timer.reg.tcon &
@@ -1288,7 +1286,6 @@
break;
case L0_TCNTB: case L1_TCNTB:
-
lt_i = GET_L_TIMER_IDX(offset);
index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);
@@ -1316,7 +1313,6 @@
break;
case L0_ICNTB: case L1_ICNTB:
-
lt_i = GET_L_TIMER_IDX(offset);
index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);
@@ -1353,13 +1349,12 @@
if (icntb_max[lt_i] < value) {
icntb_max[lt_i] = value;
}
-DPRINTF("local timer[%d] ICNTB write %llx; max=%x, min=%x\n\n",
- lt_i, value, icntb_max[lt_i], icntb_min[lt_i]);
+ DPRINTF("local timer[%d] ICNTB write %llx; max=%x, min=%x\n\n",
+ lt_i, value, icntb_max[lt_i], icntb_min[lt_i]);
#endif
-break;
+ break;
case L0_FRCNTB: case L1_FRCNTB:
-
lt_i = GET_L_TIMER_IDX(offset);
index = GET_L_TIMER_CNT_REG_IDX(offset, lt_i);