| /* |
| * QEMU ARM TCG CPUs. |
| * |
| * Copyright (c) 2012 SUSE LINUX Products GmbH |
| * |
| * This code is licensed under the GNU GPL v2 or later. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "cpu.h" |
| #ifdef CONFIG_TCG |
| #include "hw/core/tcg-cpu-ops.h" |
| #endif /* CONFIG_TCG */ |
| #include "internals.h" |
| #include "target/arm/idau.h" |
| #if !defined(CONFIG_USER_ONLY) |
| #include "hw/boards.h" |
| #endif |
| |
| /* CPU models. These are not needed for the AArch64 linux-user build. */ |
| #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) |
| |
| #if !defined(CONFIG_USER_ONLY) && defined(CONFIG_TCG) |
| static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cs); |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| bool ret = false; |
| |
| /* |
| * ARMv7-M interrupt masking works differently than -A or -R. |
| * There is no FIQ/IRQ distinction. Instead of I and F bits |
| * masking FIQ and IRQ interrupts, an exception is taken only |
| * if it is higher priority than the current execution priority |
| * (which depends on state like BASEPRI, FAULTMASK and the |
| * currently active exception). |
| */ |
| if (interrupt_request & CPU_INTERRUPT_HARD |
| && (armv7m_nvic_can_take_pending_exception(env->nvic))) { |
| cs->exception_index = EXCP_IRQ; |
| cc->tcg_ops->do_interrupt(cs); |
| ret = true; |
| } |
| return ret; |
| } |
| #endif /* !CONFIG_USER_ONLY && CONFIG_TCG */ |
| |
| static void arm926_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm926"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); |
| cpu->midr = 0x41069265; |
| cpu->reset_fpsid = 0x41011090; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00090078; |
| |
| /* |
| * ARMv5 does not have the ID_ISAR registers, but we can still |
| * set the field to indicate Jazelle support within QEMU. |
| */ |
| cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1); |
| /* |
| * Similarly, we need to set MVFR0 fields to enable vfp and short vector |
| * support even though ARMv5 doesn't have this register. |
| */ |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1); |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1); |
| } |
| |
| static void arm946_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm946"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_PMSA); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x41059461; |
| cpu->ctr = 0x0f004006; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void arm1026_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm1026"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_AUXCR); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); |
| cpu->midr = 0x4106a262; |
| cpu->reset_fpsid = 0x410110a0; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00090078; |
| cpu->reset_auxcr = 1; |
| |
| /* |
| * ARMv5 does not have the ID_ISAR registers, but we can still |
| * set the field to indicate Jazelle support within QEMU. |
| */ |
| cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1); |
| /* |
| * Similarly, we need to set MVFR0 fields to enable vfp and short vector |
| * support even though ARMv5 doesn't have this register. |
| */ |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1); |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1); |
| |
| { |
| /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */ |
| ARMCPRegInfo ifar = { |
| .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.ifar_ns), |
| .resetvalue = 0 |
| }; |
| define_one_arm_cp_reg(cpu, &ifar); |
| } |
| } |
| |
| static void arm1136_r2_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| /* |
| * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an |
| * older core than plain "arm1136". In particular this does not |
| * have the v6K features. |
| * These ID register values are correct for 1136 but may be wrong |
| * for 1136_r2 (in particular r0p2 does not actually implement most |
| * of the ID registers). |
| */ |
| |
| cpu->dtb_compatible = "arm,arm1136"; |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = 0x4107b362; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->isar.mvfr0 = 0x11111111; |
| cpu->isar.mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->isar.id_pfr0 = 0x111; |
| cpu->isar.id_pfr1 = 0x1; |
| cpu->isar.id_dfr0 = 0x2; |
| cpu->id_afr0 = 0x3; |
| cpu->isar.id_mmfr0 = 0x01130003; |
| cpu->isar.id_mmfr1 = 0x10030302; |
| cpu->isar.id_mmfr2 = 0x01222110; |
| cpu->isar.id_isar0 = 0x00140011; |
| cpu->isar.id_isar1 = 0x12002111; |
| cpu->isar.id_isar2 = 0x11231111; |
| cpu->isar.id_isar3 = 0x01102131; |
| cpu->isar.id_isar4 = 0x141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm1136_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm1136"; |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = 0x4117b363; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->isar.mvfr0 = 0x11111111; |
| cpu->isar.mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->isar.id_pfr0 = 0x111; |
| cpu->isar.id_pfr1 = 0x1; |
| cpu->isar.id_dfr0 = 0x2; |
| cpu->id_afr0 = 0x3; |
| cpu->isar.id_mmfr0 = 0x01130003; |
| cpu->isar.id_mmfr1 = 0x10030302; |
| cpu->isar.id_mmfr2 = 0x01222110; |
| cpu->isar.id_isar0 = 0x00140011; |
| cpu->isar.id_isar1 = 0x12002111; |
| cpu->isar.id_isar2 = 0x11231111; |
| cpu->isar.id_isar3 = 0x01102131; |
| cpu->isar.id_isar4 = 0x141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm1176_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm1176"; |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_VAPA); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| cpu->midr = 0x410fb767; |
| cpu->reset_fpsid = 0x410120b5; |
| cpu->isar.mvfr0 = 0x11111111; |
| cpu->isar.mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->isar.id_pfr0 = 0x111; |
| cpu->isar.id_pfr1 = 0x11; |
| cpu->isar.id_dfr0 = 0x33; |
| cpu->id_afr0 = 0; |
| cpu->isar.id_mmfr0 = 0x01130003; |
| cpu->isar.id_mmfr1 = 0x10030302; |
| cpu->isar.id_mmfr2 = 0x01222100; |
| cpu->isar.id_isar0 = 0x0140011; |
| cpu->isar.id_isar1 = 0x12002111; |
| cpu->isar.id_isar2 = 0x11231121; |
| cpu->isar.id_isar3 = 0x01102131; |
| cpu->isar.id_isar4 = 0x01141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm11mpcore_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm11mpcore"; |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_VAPA); |
| set_feature(&cpu->env, ARM_FEATURE_MPIDR); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x410fb022; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->isar.mvfr0 = 0x11111111; |
| cpu->isar.mvfr1 = 0x00000000; |
| cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */ |
| cpu->isar.id_pfr0 = 0x111; |
| cpu->isar.id_pfr1 = 0x1; |
| cpu->isar.id_dfr0 = 0; |
| cpu->id_afr0 = 0x2; |
| cpu->isar.id_mmfr0 = 0x01100103; |
| cpu->isar.id_mmfr1 = 0x10020302; |
| cpu->isar.id_mmfr2 = 0x01222000; |
| cpu->isar.id_isar0 = 0x00100011; |
| cpu->isar.id_isar1 = 0x12002111; |
| cpu->isar.id_isar2 = 0x11221011; |
| cpu->isar.id_isar3 = 0x01102131; |
| cpu->isar.id_isar4 = 0x141; |
| cpu->reset_auxcr = 1; |
| } |
| |
| static const ARMCPRegInfo cortexa8_cp_reginfo[] = { |
| { .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "L2AUXCR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a8_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a8"; |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| cpu->midr = 0x410fc080; |
| cpu->reset_fpsid = 0x410330c0; |
| cpu->isar.mvfr0 = 0x11110222; |
| cpu->isar.mvfr1 = 0x00011111; |
| cpu->ctr = 0x82048004; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->isar.id_pfr0 = 0x1031; |
| cpu->isar.id_pfr1 = 0x11; |
| cpu->isar.id_dfr0 = 0x400; |
| cpu->id_afr0 = 0; |
| cpu->isar.id_mmfr0 = 0x31100003; |
| cpu->isar.id_mmfr1 = 0x20000000; |
| cpu->isar.id_mmfr2 = 0x01202000; |
| cpu->isar.id_mmfr3 = 0x11; |
| cpu->isar.id_isar0 = 0x00101111; |
| cpu->isar.id_isar1 = 0x12112111; |
| cpu->isar.id_isar2 = 0x21232031; |
| cpu->isar.id_isar3 = 0x11112131; |
| cpu->isar.id_isar4 = 0x00111142; |
| cpu->isar.dbgdidr = 0x15141000; |
| cpu->clidr = (1 << 27) | (2 << 24) | 3; |
| cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */ |
| cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */ |
| cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */ |
| cpu->reset_auxcr = 2; |
| define_arm_cp_regs(cpu, cortexa8_cp_reginfo); |
| } |
| |
| static const ARMCPRegInfo cortexa9_cp_reginfo[] = { |
| /* |
| * power_control should be set to maximum latency. Again, |
| * default to 0 and set by private hook |
| */ |
| { .name = "A9_PWRCTL", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_power_control) }, |
| { .name = "A9_DIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_diagnostic) }, |
| { .name = "A9_PWRDIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_power_diagnostic) }, |
| { .name = "NEONBUSY", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| /* TLB lockdown control */ |
| { .name = "TLB_LOCKR", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 2, |
| .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKW", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 4, |
| .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP }, |
| { .name = "TLB_VA", .cp = 15, .crn = 15, .crm = 5, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| { .name = "TLB_PA", .cp = 15, .crn = 15, .crm = 6, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| { .name = "TLB_ATTR", .cp = 15, .crn = 15, .crm = 7, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a9_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a9"; |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| /* |
| * Note that A9 supports the MP extensions even for |
| * A9UP and single-core A9MP (which are both different |
| * and valid configurations; we don't model A9UP). |
| */ |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| set_feature(&cpu->env, ARM_FEATURE_CBAR); |
| cpu->midr = 0x410fc090; |
| cpu->reset_fpsid = 0x41033090; |
| cpu->isar.mvfr0 = 0x11110222; |
| cpu->isar.mvfr1 = 0x01111111; |
| cpu->ctr = 0x80038003; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->isar.id_pfr0 = 0x1031; |
| cpu->isar.id_pfr1 = 0x11; |
| cpu->isar.id_dfr0 = 0x000; |
| cpu->id_afr0 = 0; |
| cpu->isar.id_mmfr0 = 0x00100103; |
| cpu->isar.id_mmfr1 = 0x20000000; |
| cpu->isar.id_mmfr2 = 0x01230000; |
| cpu->isar.id_mmfr3 = 0x00002111; |
| cpu->isar.id_isar0 = 0x00101111; |
| cpu->isar.id_isar1 = 0x13112111; |
| cpu->isar.id_isar2 = 0x21232041; |
| cpu->isar.id_isar3 = 0x11112131; |
| cpu->isar.id_isar4 = 0x00111142; |
| cpu->isar.dbgdidr = 0x35141000; |
| cpu->clidr = (1 << 27) | (1 << 24) | 3; |
| cpu->ccsidr[0] = 0xe00fe019; /* 16k L1 dcache. */ |
| cpu->ccsidr[1] = 0x200fe019; /* 16k L1 icache. */ |
| define_arm_cp_regs(cpu, cortexa9_cp_reginfo); |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static uint64_t a15_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| |
| /* |
| * Linux wants the number of processors from here. |
| * Might as well set the interrupt-controller bit too. |
| */ |
| return ((ms->smp.cpus - 1) << 24) | (1 << 23); |
| } |
| #endif |
| |
| static const ARMCPRegInfo cortexa15_cp_reginfo[] = { |
| #ifndef CONFIG_USER_ONLY |
| { .name = "L2CTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .readfn = a15_l2ctlr_read, |
| .writefn = arm_cp_write_ignore, }, |
| #endif |
| { .name = "L2ECTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 3, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a7_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a7"; |
| set_feature(&cpu->env, ARM_FEATURE_V7VE); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); |
| set_feature(&cpu->env, ARM_FEATURE_EL2); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| set_feature(&cpu->env, ARM_FEATURE_PMU); |
| cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A7; |
| cpu->midr = 0x410fc075; |
| cpu->reset_fpsid = 0x41023075; |
| cpu->isar.mvfr0 = 0x10110222; |
| cpu->isar.mvfr1 = 0x11111111; |
| cpu->ctr = 0x84448003; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->isar.id_pfr0 = 0x00001131; |
| cpu->isar.id_pfr1 = 0x00011011; |
| cpu->isar.id_dfr0 = 0x02010555; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x10101105; |
| cpu->isar.id_mmfr1 = 0x40000000; |
| cpu->isar.id_mmfr2 = 0x01240000; |
| cpu->isar.id_mmfr3 = 0x02102211; |
| /* |
| * a7_mpcore_r0p5_trm, page 4-4 gives 0x01101110; but |
| * table 4-41 gives 0x02101110, which includes the arm div insns. |
| */ |
| cpu->isar.id_isar0 = 0x02101110; |
| cpu->isar.id_isar1 = 0x13112111; |
| cpu->isar.id_isar2 = 0x21232041; |
| cpu->isar.id_isar3 = 0x11112131; |
| cpu->isar.id_isar4 = 0x10011142; |
| cpu->isar.dbgdidr = 0x3515f005; |
| cpu->clidr = 0x0a200023; |
| cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */ |
| cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */ |
| cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */ |
| define_arm_cp_regs(cpu, cortexa15_cp_reginfo); /* Same as A15 */ |
| } |
| |
| static void cortex_a15_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a15"; |
| set_feature(&cpu->env, ARM_FEATURE_V7VE); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); |
| set_feature(&cpu->env, ARM_FEATURE_EL2); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| set_feature(&cpu->env, ARM_FEATURE_PMU); |
| cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A15; |
| cpu->midr = 0x412fc0f1; |
| cpu->reset_fpsid = 0x410430f0; |
| cpu->isar.mvfr0 = 0x10110222; |
| cpu->isar.mvfr1 = 0x11111111; |
| cpu->ctr = 0x8444c004; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->isar.id_pfr0 = 0x00001131; |
| cpu->isar.id_pfr1 = 0x00011011; |
| cpu->isar.id_dfr0 = 0x02010555; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x10201105; |
| cpu->isar.id_mmfr1 = 0x20000000; |
| cpu->isar.id_mmfr2 = 0x01240000; |
| cpu->isar.id_mmfr3 = 0x02102211; |
| cpu->isar.id_isar0 = 0x02101110; |
| cpu->isar.id_isar1 = 0x13112111; |
| cpu->isar.id_isar2 = 0x21232041; |
| cpu->isar.id_isar3 = 0x11112131; |
| cpu->isar.id_isar4 = 0x10011142; |
| cpu->isar.dbgdidr = 0x3515f021; |
| cpu->clidr = 0x0a200023; |
| cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */ |
| cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */ |
| cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */ |
| define_arm_cp_regs(cpu, cortexa15_cp_reginfo); |
| } |
| |
| static void cortex_m0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| |
| cpu->midr = 0x410cc200; |
| |
| /* |
| * These ID register values are not guest visible, because |
| * we do not implement the Main Extension. They must be set |
| * to values corresponding to the Cortex-M0's implemented |
| * features, because QEMU generally controls its emulation |
| * by looking at ID register fields. We use the same values as |
| * for the M3. |
| */ |
| cpu->isar.id_pfr0 = 0x00000030; |
| cpu->isar.id_pfr1 = 0x00000200; |
| cpu->isar.id_dfr0 = 0x00100000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x00000030; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x00000000; |
| cpu->isar.id_mmfr3 = 0x00000000; |
| cpu->isar.id_isar0 = 0x01141110; |
| cpu->isar.id_isar1 = 0x02111000; |
| cpu->isar.id_isar2 = 0x21112231; |
| cpu->isar.id_isar3 = 0x01111110; |
| cpu->isar.id_isar4 = 0x01310102; |
| cpu->isar.id_isar5 = 0x00000000; |
| cpu->isar.id_isar6 = 0x00000000; |
| } |
| |
| static void cortex_m3_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| cpu->midr = 0x410fc231; |
| cpu->pmsav7_dregion = 8; |
| cpu->isar.id_pfr0 = 0x00000030; |
| cpu->isar.id_pfr1 = 0x00000200; |
| cpu->isar.id_dfr0 = 0x00100000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x00000030; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x00000000; |
| cpu->isar.id_mmfr3 = 0x00000000; |
| cpu->isar.id_isar0 = 0x01141110; |
| cpu->isar.id_isar1 = 0x02111000; |
| cpu->isar.id_isar2 = 0x21112231; |
| cpu->isar.id_isar3 = 0x01111110; |
| cpu->isar.id_isar4 = 0x01310102; |
| cpu->isar.id_isar5 = 0x00000000; |
| cpu->isar.id_isar6 = 0x00000000; |
| } |
| |
| static void cortex_m4_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); |
| cpu->midr = 0x410fc240; /* r0p0 */ |
| cpu->pmsav7_dregion = 8; |
| cpu->isar.mvfr0 = 0x10110021; |
| cpu->isar.mvfr1 = 0x11000011; |
| cpu->isar.mvfr2 = 0x00000000; |
| cpu->isar.id_pfr0 = 0x00000030; |
| cpu->isar.id_pfr1 = 0x00000200; |
| cpu->isar.id_dfr0 = 0x00100000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x00000030; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x00000000; |
| cpu->isar.id_mmfr3 = 0x00000000; |
| cpu->isar.id_isar0 = 0x01141110; |
| cpu->isar.id_isar1 = 0x02111000; |
| cpu->isar.id_isar2 = 0x21112231; |
| cpu->isar.id_isar3 = 0x01111110; |
| cpu->isar.id_isar4 = 0x01310102; |
| cpu->isar.id_isar5 = 0x00000000; |
| cpu->isar.id_isar6 = 0x00000000; |
| } |
| |
| static void cortex_m7_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); |
| cpu->midr = 0x411fc272; /* r1p2 */ |
| cpu->pmsav7_dregion = 8; |
| cpu->isar.mvfr0 = 0x10110221; |
| cpu->isar.mvfr1 = 0x12000011; |
| cpu->isar.mvfr2 = 0x00000040; |
| cpu->isar.id_pfr0 = 0x00000030; |
| cpu->isar.id_pfr1 = 0x00000200; |
| cpu->isar.id_dfr0 = 0x00100000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x00100030; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x01000000; |
| cpu->isar.id_mmfr3 = 0x00000000; |
| cpu->isar.id_isar0 = 0x01101110; |
| cpu->isar.id_isar1 = 0x02112000; |
| cpu->isar.id_isar2 = 0x20232231; |
| cpu->isar.id_isar3 = 0x01111131; |
| cpu->isar.id_isar4 = 0x01310132; |
| cpu->isar.id_isar5 = 0x00000000; |
| cpu->isar.id_isar6 = 0x00000000; |
| } |
| |
| static void cortex_m33_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V8); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); |
| cpu->midr = 0x410fd213; /* r0p3 */ |
| cpu->pmsav7_dregion = 16; |
| cpu->sau_sregion = 8; |
| cpu->isar.mvfr0 = 0x10110021; |
| cpu->isar.mvfr1 = 0x11000011; |
| cpu->isar.mvfr2 = 0x00000040; |
| cpu->isar.id_pfr0 = 0x00000030; |
| cpu->isar.id_pfr1 = 0x00000210; |
| cpu->isar.id_dfr0 = 0x00200000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x00101F40; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x01000000; |
| cpu->isar.id_mmfr3 = 0x00000000; |
| cpu->isar.id_isar0 = 0x01101110; |
| cpu->isar.id_isar1 = 0x02212000; |
| cpu->isar.id_isar2 = 0x20232232; |
| cpu->isar.id_isar3 = 0x01111131; |
| cpu->isar.id_isar4 = 0x01310132; |
| cpu->isar.id_isar5 = 0x00000000; |
| cpu->isar.id_isar6 = 0x00000000; |
| cpu->clidr = 0x00000000; |
| cpu->ctr = 0x8000c000; |
| } |
| |
| static void cortex_m55_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V8); |
| set_feature(&cpu->env, ARM_FEATURE_V8_1M); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); |
| cpu->midr = 0x410fd221; /* r0p1 */ |
| cpu->revidr = 0; |
| cpu->pmsav7_dregion = 16; |
| cpu->sau_sregion = 8; |
| /* These are the MVFR* values for the FPU + full MVE configuration */ |
| cpu->isar.mvfr0 = 0x10110221; |
| cpu->isar.mvfr1 = 0x12100211; |
| cpu->isar.mvfr2 = 0x00000040; |
| cpu->isar.id_pfr0 = 0x20000030; |
| cpu->isar.id_pfr1 = 0x00000230; |
| cpu->isar.id_dfr0 = 0x10200000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->isar.id_mmfr0 = 0x00111040; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x01000000; |
| cpu->isar.id_mmfr3 = 0x00000011; |
| cpu->isar.id_isar0 = 0x01103110; |
| cpu->isar.id_isar1 = 0x02212000; |
| cpu->isar.id_isar2 = 0x20232232; |
| cpu->isar.id_isar3 = 0x01111131; |
| cpu->isar.id_isar4 = 0x01310132; |
| cpu->isar.id_isar5 = 0x00000000; |
| cpu->isar.id_isar6 = 0x00000000; |
| cpu->clidr = 0x00000000; /* caches not implemented */ |
| cpu->ctr = 0x8303c003; |
| } |
| |
| static const ARMCPRegInfo cortexr5_cp_reginfo[] = { |
| /* Dummy the TCM region regs for the moment */ |
| { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_CONST }, |
| { .name = "BTCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_CONST }, |
| { .name = "DCACHE_INVAL", .cp = 15, .opc1 = 0, .crn = 15, .crm = 5, |
| .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_r5_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| set_feature(&cpu->env, ARM_FEATURE_PMSA); |
| set_feature(&cpu->env, ARM_FEATURE_PMU); |
| cpu->midr = 0x411fc153; /* r1p3 */ |
| cpu->isar.id_pfr0 = 0x0131; |
| cpu->isar.id_pfr1 = 0x001; |
| cpu->isar.id_dfr0 = 0x010400; |
| cpu->id_afr0 = 0x0; |
| cpu->isar.id_mmfr0 = 0x0210030; |
| cpu->isar.id_mmfr1 = 0x00000000; |
| cpu->isar.id_mmfr2 = 0x01200000; |
| cpu->isar.id_mmfr3 = 0x0211; |
| cpu->isar.id_isar0 = 0x02101111; |
| cpu->isar.id_isar1 = 0x13112111; |
| cpu->isar.id_isar2 = 0x21232141; |
| cpu->isar.id_isar3 = 0x01112131; |
| cpu->isar.id_isar4 = 0x0010142; |
| cpu->isar.id_isar5 = 0x0; |
| cpu->isar.id_isar6 = 0x0; |
| cpu->mp_is_up = true; |
| cpu->pmsav7_dregion = 16; |
| define_arm_cp_regs(cpu, cortexr5_cp_reginfo); |
| } |
| |
| static void cortex_r5f_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cortex_r5_initfn(obj); |
| cpu->isar.mvfr0 = 0x10110221; |
| cpu->isar.mvfr1 = 0x00000011; |
| } |
| |
| static void ti925t_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V4T); |
| set_feature(&cpu->env, ARM_FEATURE_OMAPCP); |
| cpu->midr = ARM_CPUID_TI925T; |
| cpu->ctr = 0x5109149; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void sa1100_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "intel,sa1100"; |
| set_feature(&cpu->env, ARM_FEATURE_STRONGARM); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x4401A11B; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void sa1110_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_STRONGARM); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x6901B119; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void pxa250_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052100; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa255_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052d00; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa260_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052903; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa261_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052d05; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa262_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052d06; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270a0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054110; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270a1_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054111; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270b0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054112; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270b1_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054113; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270c0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054114; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270c5_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054117; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| #ifdef CONFIG_TCG |
| static const struct TCGCPUOps arm_v7m_tcg_ops = { |
| .initialize = arm_translate_init, |
| .synchronize_from_tb = arm_cpu_synchronize_from_tb, |
| .tlb_fill = arm_cpu_tlb_fill, |
| .debug_excp_handler = arm_debug_excp_handler, |
| |
| #if !defined(CONFIG_USER_ONLY) |
| .cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt, |
| .do_interrupt = arm_v7m_cpu_do_interrupt, |
| .do_transaction_failed = arm_cpu_do_transaction_failed, |
| .do_unaligned_access = arm_cpu_do_unaligned_access, |
| .adjust_watchpoint_address = arm_adjust_watchpoint_address, |
| .debug_check_watchpoint = arm_debug_check_watchpoint, |
| .debug_check_breakpoint = arm_debug_check_breakpoint, |
| #endif /* !CONFIG_USER_ONLY */ |
| }; |
| #endif /* CONFIG_TCG */ |
| |
| static void arm_v7m_class_init(ObjectClass *oc, void *data) |
| { |
| ARMCPUClass *acc = ARM_CPU_CLASS(oc); |
| CPUClass *cc = CPU_CLASS(oc); |
| |
| acc->info = data; |
| #ifdef CONFIG_TCG |
| cc->tcg_ops = &arm_v7m_tcg_ops; |
| #endif /* CONFIG_TCG */ |
| |
| cc->gdb_core_xml_file = "arm-m-profile.xml"; |
| } |
| |
| #ifndef TARGET_AARCH64 |
| /* |
| * -cpu max: a CPU with as many features enabled as our emulation supports. |
| * The version of '-cpu max' for qemu-system-aarch64 is defined in cpu64.c; |
| * this only needs to handle 32 bits, and need not care about KVM. |
| */ |
| static void arm_max_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cortex_a15_initfn(obj); |
| |
| /* old-style VFP short-vector support */ |
| cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1); |
| |
| #ifdef CONFIG_USER_ONLY |
| /* |
| * We don't set these in system emulation mode for the moment, |
| * since we don't correctly set (all of) the ID registers to |
| * advertise them. |
| */ |
| set_feature(&cpu->env, ARM_FEATURE_V8); |
| { |
| uint32_t t; |
| |
| t = cpu->isar.id_isar5; |
| t = FIELD_DP32(t, ID_ISAR5, AES, 2); |
| t = FIELD_DP32(t, ID_ISAR5, SHA1, 1); |
| t = FIELD_DP32(t, ID_ISAR5, SHA2, 1); |
| t = FIELD_DP32(t, ID_ISAR5, CRC32, 1); |
| t = FIELD_DP32(t, ID_ISAR5, RDM, 1); |
| t = FIELD_DP32(t, ID_ISAR5, VCMA, 1); |
| cpu->isar.id_isar5 = t; |
| |
| t = cpu->isar.id_isar6; |
| t = FIELD_DP32(t, ID_ISAR6, JSCVT, 1); |
| t = FIELD_DP32(t, ID_ISAR6, DP, 1); |
| t = FIELD_DP32(t, ID_ISAR6, FHM, 1); |
| t = FIELD_DP32(t, ID_ISAR6, SB, 1); |
| t = FIELD_DP32(t, ID_ISAR6, SPECRES, 1); |
| t = FIELD_DP32(t, ID_ISAR6, BF16, 1); |
| t = FIELD_DP32(t, ID_ISAR6, I8MM, 1); |
| cpu->isar.id_isar6 = t; |
| |
| t = cpu->isar.mvfr1; |
| t = FIELD_DP32(t, MVFR1, FPHP, 3); /* v8.2-FP16 */ |
| t = FIELD_DP32(t, MVFR1, SIMDHP, 2); /* v8.2-FP16 */ |
| cpu->isar.mvfr1 = t; |
| |
| t = cpu->isar.mvfr2; |
| t = FIELD_DP32(t, MVFR2, SIMDMISC, 3); /* SIMD MaxNum */ |
| t = FIELD_DP32(t, MVFR2, FPMISC, 4); /* FP MaxNum */ |
| cpu->isar.mvfr2 = t; |
| |
| t = cpu->isar.id_mmfr3; |
| t = FIELD_DP32(t, ID_MMFR3, PAN, 2); /* ATS1E1 */ |
| cpu->isar.id_mmfr3 = t; |
| |
| t = cpu->isar.id_mmfr4; |
| t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* AA32HPD */ |
| t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ |
| t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* TTCNP */ |
| t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* TTS2UXN */ |
| cpu->isar.id_mmfr4 = t; |
| |
| t = cpu->isar.id_pfr0; |
| t = FIELD_DP32(t, ID_PFR0, DIT, 1); |
| cpu->isar.id_pfr0 = t; |
| |
| t = cpu->isar.id_pfr2; |
| t = FIELD_DP32(t, ID_PFR2, SSBS, 1); |
| cpu->isar.id_pfr2 = t; |
| } |
| #endif /* CONFIG_USER_ONLY */ |
| } |
| #endif /* !TARGET_AARCH64 */ |
| |
| static const ARMCPUInfo arm_tcg_cpus[] = { |
| { .name = "arm926", .initfn = arm926_initfn }, |
| { .name = "arm946", .initfn = arm946_initfn }, |
| { .name = "arm1026", .initfn = arm1026_initfn }, |
| /* |
| * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an |
| * older core than plain "arm1136". In particular this does not |
| * have the v6K features. |
| */ |
| { .name = "arm1136-r2", .initfn = arm1136_r2_initfn }, |
| { .name = "arm1136", .initfn = arm1136_initfn }, |
| { .name = "arm1176", .initfn = arm1176_initfn }, |
| { .name = "arm11mpcore", .initfn = arm11mpcore_initfn }, |
| { .name = "cortex-a7", .initfn = cortex_a7_initfn }, |
| { .name = "cortex-a8", .initfn = cortex_a8_initfn }, |
| { .name = "cortex-a9", .initfn = cortex_a9_initfn }, |
| { .name = "cortex-a15", .initfn = cortex_a15_initfn }, |
| { .name = "cortex-m0", .initfn = cortex_m0_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m3", .initfn = cortex_m3_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m4", .initfn = cortex_m4_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m7", .initfn = cortex_m7_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m33", .initfn = cortex_m33_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m55", .initfn = cortex_m55_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-r5", .initfn = cortex_r5_initfn }, |
| { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, |
| { .name = "ti925t", .initfn = ti925t_initfn }, |
| { .name = "sa1100", .initfn = sa1100_initfn }, |
| { .name = "sa1110", .initfn = sa1110_initfn }, |
| { .name = "pxa250", .initfn = pxa250_initfn }, |
| { .name = "pxa255", .initfn = pxa255_initfn }, |
| { .name = "pxa260", .initfn = pxa260_initfn }, |
| { .name = "pxa261", .initfn = pxa261_initfn }, |
| { .name = "pxa262", .initfn = pxa262_initfn }, |
| /* "pxa270" is an alias for "pxa270-a0" */ |
| { .name = "pxa270", .initfn = pxa270a0_initfn }, |
| { .name = "pxa270-a0", .initfn = pxa270a0_initfn }, |
| { .name = "pxa270-a1", .initfn = pxa270a1_initfn }, |
| { .name = "pxa270-b0", .initfn = pxa270b0_initfn }, |
| { .name = "pxa270-b1", .initfn = pxa270b1_initfn }, |
| { .name = "pxa270-c0", .initfn = pxa270c0_initfn }, |
| { .name = "pxa270-c5", .initfn = pxa270c5_initfn }, |
| #ifndef TARGET_AARCH64 |
| { .name = "max", .initfn = arm_max_initfn }, |
| #endif |
| #ifdef CONFIG_USER_ONLY |
| { .name = "any", .initfn = arm_max_initfn }, |
| #endif |
| }; |
| |
| static const TypeInfo idau_interface_type_info = { |
| .name = TYPE_IDAU_INTERFACE, |
| .parent = TYPE_INTERFACE, |
| .class_size = sizeof(IDAUInterfaceClass), |
| }; |
| |
| static void arm_tcg_cpu_register_types(void) |
| { |
| size_t i; |
| |
| type_register_static(&idau_interface_type_info); |
| for (i = 0; i < ARRAY_SIZE(arm_tcg_cpus); ++i) { |
| arm_cpu_register(&arm_tcg_cpus[i]); |
| } |
| } |
| |
| type_init(arm_tcg_cpu_register_types) |
| |
| #endif /* !CONFIG_USER_ONLY || !TARGET_AARCH64 */ |