| /* |
| * QEMU model for the AXIS devboard 88. |
| * |
| * Copyright (c) 2009 Edgar E. Iglesias, Axis Communications AB. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "hw/sysbus.h" |
| #include "net/net.h" |
| #include "hw/block/flash.h" |
| #include "hw/boards.h" |
| #include "hw/cris/etraxfs.h" |
| #include "hw/loader.h" |
| #include "elf.h" |
| #include "boot.h" |
| #include "sysemu/blockdev.h" |
| #include "exec/address-spaces.h" |
| |
| #define D(x) |
| #define DNAND(x) |
| |
| struct nand_state_t |
| { |
| DeviceState *nand; |
| MemoryRegion iomem; |
| unsigned int rdy:1; |
| unsigned int ale:1; |
| unsigned int cle:1; |
| unsigned int ce:1; |
| }; |
| |
| static struct nand_state_t nand_state; |
| static uint64_t nand_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct nand_state_t *s = opaque; |
| uint32_t r; |
| int rdy; |
| |
| r = nand_getio(s->nand); |
| nand_getpins(s->nand, &rdy); |
| s->rdy = rdy; |
| |
| DNAND(printf("%s addr=%x r=%x\n", __func__, addr, r)); |
| return r; |
| } |
| |
| static void |
| nand_write(void *opaque, hwaddr addr, uint64_t value, |
| unsigned size) |
| { |
| struct nand_state_t *s = opaque; |
| int rdy; |
| |
| DNAND(printf("%s addr=%x v=%x\n", __func__, addr, (unsigned)value)); |
| nand_setpins(s->nand, s->cle, s->ale, s->ce, 1, 0); |
| nand_setio(s->nand, value); |
| nand_getpins(s->nand, &rdy); |
| s->rdy = rdy; |
| } |
| |
| static const MemoryRegionOps nand_ops = { |
| .read = nand_read, |
| .write = nand_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| struct tempsensor_t |
| { |
| unsigned int shiftreg; |
| unsigned int count; |
| enum { |
| ST_OUT, ST_IN, ST_Z |
| } state; |
| |
| uint16_t regs[3]; |
| }; |
| |
| static void tempsensor_clkedge(struct tempsensor_t *s, |
| unsigned int clk, unsigned int data_in) |
| { |
| D(printf("%s clk=%d state=%d sr=%x\n", __func__, |
| clk, s->state, s->shiftreg)); |
| if (s->count == 0) { |
| s->count = 16; |
| s->state = ST_OUT; |
| } |
| switch (s->state) { |
| case ST_OUT: |
| /* Output reg is clocked at negedge. */ |
| if (!clk) { |
| s->count--; |
| s->shiftreg <<= 1; |
| if (s->count == 0) { |
| s->shiftreg = 0; |
| s->state = ST_IN; |
| s->count = 16; |
| } |
| } |
| break; |
| case ST_Z: |
| if (clk) { |
| s->count--; |
| if (s->count == 0) { |
| s->shiftreg = 0; |
| s->state = ST_OUT; |
| s->count = 16; |
| } |
| } |
| break; |
| case ST_IN: |
| /* Indata is sampled at posedge. */ |
| if (clk) { |
| s->count--; |
| s->shiftreg <<= 1; |
| s->shiftreg |= data_in & 1; |
| if (s->count == 0) { |
| D(printf("%s cfgreg=%x\n", __func__, s->shiftreg)); |
| s->regs[0] = s->shiftreg; |
| s->state = ST_OUT; |
| s->count = 16; |
| |
| if ((s->regs[0] & 0xff) == 0) { |
| /* 25 degrees celcius. */ |
| s->shiftreg = 0x0b9f; |
| } else if ((s->regs[0] & 0xff) == 0xff) { |
| /* Sensor ID, 0x8100 LM70. */ |
| s->shiftreg = 0x8100; |
| } else |
| printf("Invalid tempsens state %x\n", s->regs[0]); |
| } |
| } |
| break; |
| } |
| } |
| |
| |
| #define RW_PA_DOUT 0x00 |
| #define R_PA_DIN 0x01 |
| #define RW_PA_OE 0x02 |
| #define RW_PD_DOUT 0x10 |
| #define R_PD_DIN 0x11 |
| #define RW_PD_OE 0x12 |
| |
| static struct gpio_state_t |
| { |
| MemoryRegion iomem; |
| struct nand_state_t *nand; |
| struct tempsensor_t tempsensor; |
| uint32_t regs[0x5c / 4]; |
| } gpio_state; |
| |
| static uint64_t gpio_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct gpio_state_t *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) |
| { |
| case R_PA_DIN: |
| r = s->regs[RW_PA_DOUT] & s->regs[RW_PA_OE]; |
| |
| /* Encode pins from the nand. */ |
| r |= s->nand->rdy << 7; |
| break; |
| case R_PD_DIN: |
| r = s->regs[RW_PD_DOUT] & s->regs[RW_PD_OE]; |
| |
| /* Encode temp sensor pins. */ |
| r |= (!!(s->tempsensor.shiftreg & 0x10000)) << 4; |
| break; |
| |
| default: |
| r = s->regs[addr]; |
| break; |
| } |
| return r; |
| D(printf("%s %x=%x\n", __func__, addr, r)); |
| } |
| |
| static void gpio_write(void *opaque, hwaddr addr, uint64_t value, |
| unsigned size) |
| { |
| struct gpio_state_t *s = opaque; |
| D(printf("%s %x=%x\n", __func__, addr, (unsigned)value)); |
| |
| addr >>= 2; |
| switch (addr) |
| { |
| case RW_PA_DOUT: |
| /* Decode nand pins. */ |
| s->nand->ale = !!(value & (1 << 6)); |
| s->nand->cle = !!(value & (1 << 5)); |
| s->nand->ce = !!(value & (1 << 4)); |
| |
| s->regs[addr] = value; |
| break; |
| |
| case RW_PD_DOUT: |
| /* Temp sensor clk. */ |
| if ((s->regs[addr] ^ value) & 2) |
| tempsensor_clkedge(&s->tempsensor, !!(value & 2), |
| !!(value & 16)); |
| s->regs[addr] = value; |
| break; |
| |
| default: |
| s->regs[addr] = value; |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps gpio_ops = { |
| .read = gpio_read, |
| .write = gpio_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| #define INTMEM_SIZE (128 * 1024) |
| |
| static struct cris_load_info li; |
| |
| static |
| void axisdev88_init(QEMUMachineInitArgs *args) |
| { |
| ram_addr_t ram_size = args->ram_size; |
| const char *cpu_model = args->cpu_model; |
| const char *kernel_filename = args->kernel_filename; |
| const char *kernel_cmdline = args->kernel_cmdline; |
| CRISCPU *cpu; |
| CPUCRISState *env; |
| DeviceState *dev; |
| SysBusDevice *s; |
| DriveInfo *nand; |
| qemu_irq irq[30], nmi[2], *cpu_irq; |
| void *etraxfs_dmac; |
| struct etraxfs_dma_client *dma_eth; |
| int i; |
| MemoryRegion *address_space_mem = get_system_memory(); |
| MemoryRegion *phys_ram = g_new(MemoryRegion, 1); |
| MemoryRegion *phys_intmem = g_new(MemoryRegion, 1); |
| |
| /* init CPUs */ |
| if (cpu_model == NULL) { |
| cpu_model = "crisv32"; |
| } |
| cpu = cpu_cris_init(cpu_model); |
| env = &cpu->env; |
| |
| /* allocate RAM */ |
| memory_region_init_ram(phys_ram, "axisdev88.ram", ram_size); |
| vmstate_register_ram_global(phys_ram); |
| memory_region_add_subregion(address_space_mem, 0x40000000, phys_ram); |
| |
| /* The ETRAX-FS has 128Kb on chip ram, the docs refer to it as the |
| internal memory. */ |
| memory_region_init_ram(phys_intmem, "axisdev88.chipram", INTMEM_SIZE); |
| vmstate_register_ram_global(phys_intmem); |
| memory_region_add_subregion(address_space_mem, 0x38000000, phys_intmem); |
| |
| /* Attach a NAND flash to CS1. */ |
| nand = drive_get(IF_MTD, 0, 0); |
| nand_state.nand = nand_init(nand ? nand->bdrv : NULL, |
| NAND_MFR_STMICRO, 0x39); |
| memory_region_init_io(&nand_state.iomem, &nand_ops, &nand_state, |
| "nand", 0x05000000); |
| memory_region_add_subregion(address_space_mem, 0x10000000, |
| &nand_state.iomem); |
| |
| gpio_state.nand = &nand_state; |
| memory_region_init_io(&gpio_state.iomem, &gpio_ops, &gpio_state, |
| "gpio", 0x5c); |
| memory_region_add_subregion(address_space_mem, 0x3001a000, |
| &gpio_state.iomem); |
| |
| |
| cpu_irq = cris_pic_init_cpu(env); |
| dev = qdev_create(NULL, "etraxfs,pic"); |
| /* FIXME: Is there a proper way to signal vectors to the CPU core? */ |
| qdev_prop_set_ptr(dev, "interrupt_vector", &env->interrupt_vector); |
| qdev_init_nofail(dev); |
| s = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(s, 0, 0x3001c000); |
| sysbus_connect_irq(s, 0, cpu_irq[0]); |
| sysbus_connect_irq(s, 1, cpu_irq[1]); |
| for (i = 0; i < 30; i++) { |
| irq[i] = qdev_get_gpio_in(dev, i); |
| } |
| nmi[0] = qdev_get_gpio_in(dev, 30); |
| nmi[1] = qdev_get_gpio_in(dev, 31); |
| |
| etraxfs_dmac = etraxfs_dmac_init(0x30000000, 10); |
| for (i = 0; i < 10; i++) { |
| /* On ETRAX, odd numbered channels are inputs. */ |
| etraxfs_dmac_connect(etraxfs_dmac, i, irq + 7 + i, i & 1); |
| } |
| |
| /* Add the two ethernet blocks. */ |
| dma_eth = g_malloc0(sizeof dma_eth[0] * 4); /* Allocate 4 channels. */ |
| etraxfs_eth_init(&nd_table[0], 0x30034000, 1, &dma_eth[0], &dma_eth[1]); |
| if (nb_nics > 1) { |
| etraxfs_eth_init(&nd_table[1], 0x30036000, 2, &dma_eth[2], &dma_eth[3]); |
| } |
| |
| /* The DMA Connector block is missing, hardwire things for now. */ |
| etraxfs_dmac_connect_client(etraxfs_dmac, 0, &dma_eth[0]); |
| etraxfs_dmac_connect_client(etraxfs_dmac, 1, &dma_eth[1]); |
| if (nb_nics > 1) { |
| etraxfs_dmac_connect_client(etraxfs_dmac, 6, &dma_eth[2]); |
| etraxfs_dmac_connect_client(etraxfs_dmac, 7, &dma_eth[3]); |
| } |
| |
| /* 2 timers. */ |
| sysbus_create_varargs("etraxfs,timer", 0x3001e000, irq[0x1b], nmi[1], NULL); |
| sysbus_create_varargs("etraxfs,timer", 0x3005e000, irq[0x1b], nmi[1], NULL); |
| |
| for (i = 0; i < 4; i++) { |
| sysbus_create_simple("etraxfs,serial", 0x30026000 + i * 0x2000, |
| irq[0x14 + i]); |
| } |
| |
| if (!kernel_filename) { |
| fprintf(stderr, "Kernel image must be specified\n"); |
| exit(1); |
| } |
| |
| li.image_filename = kernel_filename; |
| li.cmdline = kernel_cmdline; |
| cris_load_image(cpu, &li); |
| } |
| |
| static QEMUMachine axisdev88_machine = { |
| .name = "axis-dev88", |
| .desc = "AXIS devboard 88", |
| .init = axisdev88_init, |
| .is_default = 1, |
| DEFAULT_MACHINE_OPTIONS, |
| }; |
| |
| static void axisdev88_machine_init(void) |
| { |
| qemu_register_machine(&axisdev88_machine); |
| } |
| |
| machine_init(axisdev88_machine_init); |