include config.mak

TARGET_BASE_ARCH:=$(TARGET_ARCH)
ifeq ($(TARGET_ARCH), x86_64)
TARGET_BASE_ARCH:=i386
endif
ifeq ($(TARGET_ARCH), mipsn32)
TARGET_BASE_ARCH:=mips
endif
ifeq ($(TARGET_ARCH), mips64)
TARGET_BASE_ARCH:=mips
endif
ifeq ($(TARGET_ARCH), ppc64)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), ppc64h)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), ppcemb)
TARGET_BASE_ARCH:=ppc
endif
ifeq ($(TARGET_ARCH), sparc64)
TARGET_BASE_ARCH:=sparc
endif
TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
CPPFLAGS=-I. -I.. -I$(TARGET_PATH) -I$(SRC_PATH) -MMD -MP -DNEED_CPU_H
#CFLAGS+=-Werror
LIBS=
DYNGEN=../dyngen$(EXESUF)
# user emulator name
ifndef TARGET_ARCH2
TARGET_ARCH2=$(TARGET_ARCH)
endif
ifeq ($(TARGET_ARCH),arm)
  ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
    TARGET_ARCH2=armeb
  endif
endif
ifeq ($(TARGET_ARCH),sh4)
  ifeq ($(TARGET_WORDS_BIGENDIAN),yes)
    TARGET_ARCH2=sh4eb
  endif
endif
ifeq ($(TARGET_ARCH),mips)
  ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
    TARGET_ARCH2=mipsel
  endif
endif
ifeq ($(TARGET_ARCH),mipsn32)
  ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
    TARGET_ARCH2=mipsn32el
  endif
endif
ifeq ($(TARGET_ARCH),mips64)
  ifneq ($(TARGET_WORDS_BIGENDIAN),yes)
    TARGET_ARCH2=mips64el
  endif
endif

ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_ARCH2)
else
# system emulator name
ifeq ($(TARGET_ARCH), i386)
QEMU_PROG=qemu$(EXESUF)
else
QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
endif
endif

PROGS=$(QEMU_PROG)

# We require -O2 to avoid the stack setup prologue in EXIT_TB
OP_CFLAGS := -Wall -O2 -g -fno-strict-aliasing

# cc-option
# Usage: OP_CFLAGS+=$(call cc-option, -falign-functions=0, -malign-functions=0)

cc-option = $(shell if $(CC) $(OP_CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
              > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)

OP_CFLAGS+=$(call cc-option, -fno-reorder-blocks, "")
OP_CFLAGS+=$(call cc-option, -fno-gcse, "")
OP_CFLAGS+=$(call cc-option, -fno-tree-ch, "")
OP_CFLAGS+=$(call cc-option, -fno-optimize-sibling-calls, "")
OP_CFLAGS+=$(call cc-option, -fno-crossjumping, "")
OP_CFLAGS+=$(call cc-option, -fno-align-labels, "")
OP_CFLAGS+=$(call cc-option, -fno-align-jumps, "")
OP_CFLAGS+=$(call cc-option, -fno-align-functions, $(call cc-option, -malign-functions=0, ""))
OP_CFLAGS+=$(call cc-option, -fno-section-anchors, "")

HELPER_CFLAGS=

ifeq ($(ARCH),i386)
HELPER_CFLAGS+=-fomit-frame-pointer
OP_CFLAGS+=-mpreferred-stack-boundary=2 -fomit-frame-pointer
endif

ifeq ($(ARCH),ppc)
CPPFLAGS+= -D__powerpc__
endif

ifeq ($(ARCH),sparc)
  CFLAGS+=-ffixed-g2 -ffixed-g3
  OP_CFLAGS+=-fno-delayed-branch -ffixed-i0
  ifeq ($(CONFIG_SOLARIS),yes)
    OP_CFLAGS+=-fno-omit-frame-pointer
  else
    CFLAGS+=-ffixed-g1 -ffixed-g6
    HELPER_CFLAGS+=-ffixed-i0
  endif
endif

ifeq ($(ARCH),sparc64)
  CFLAGS+=-ffixed-g1 -ffixed-g4 -ffixed-g5 -ffixed-g7
  OP_CFLAGS+=-mcpu=ultrasparc -m64 -fno-delayed-branch -ffixed-i0
  ifneq ($(CONFIG_SOLARIS),yes)
    OP_CFLAGS+=-ffixed-g1 -ffixed-g4 -ffixed-g5 -ffixed-g7
  endif
endif

ifeq ($(ARCH),alpha)
# -msmall-data is not used for OP_CFLAGS because we want two-instruction
# relocations for the constant constructions
# Ensure there's only a single GP
CFLAGS+=-msmall-data
endif

ifeq ($(ARCH),ia64)
CFLAGS+=-mno-sdata
OP_CFLAGS+=-mno-sdata
endif

ifeq ($(ARCH),arm)
OP_CFLAGS+=-mno-sched-prolog -fno-omit-frame-pointer
endif

ifeq ($(ARCH),m68k)
OP_CFLAGS+=-fomit-frame-pointer
endif

ifeq ($(ARCH),mips)
OP_CFLAGS+=-mabi=32 -G0 -fno-PIC -mno-abicalls -fomit-frame-pointer -fno-delayed-branch -Wa,-O0
endif

ifeq ($(ARCH),mips64)
OP_CFLAGS+=-mabi=n32 -G0 -fno-PIC -mno-abicalls -fomit-frame-pointer -fno-delayed-branch -Wa,-O0
endif

CFLAGS+=$(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS+=$(OS_LDFLAGS) $(ARCH_LDFLAGS)
OP_CFLAGS+=$(OS_CFLAGS) $(ARCH_CFLAGS)

CPPFLAGS+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
LIBS+=-lm
ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
ifdef CONFIG_SOLARIS
LIBS+=-lsocket -lnsl -lresolv
ifdef NEEDS_LIBSUNMATH
LIBS+=-lsunmath
LDFLAGS+=-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib
OP_CFLAGS+=-I/opt/SUNWspro/prod/include/cc
CFLAGS+=-I/opt/SUNWspro/prod/include/cc
endif
endif

all: $(PROGS)

#########################################################
# cpu emulator library
LIBOBJS=exec.o kqemu.o translate-all.o cpu-exec.o\
        translate.o host-utils.o
ifndef CONFIG_NO_DYNGEN_OP
LIBOBJS+=op.o
endif
# TCG code generator
LIBOBJS+= tcg/tcg.o tcg/tcg-dyngen.o tcg/tcg-runtime.o
CPPFLAGS+=-I$(SRC_PATH)/tcg -I$(SRC_PATH)/tcg/$(ARCH)
ifeq ($(ARCH),sparc64)
CPPFLAGS+=-I$(SRC_PATH)/tcg/sparc
endif
ifdef CONFIG_SOFTFLOAT
LIBOBJS+=fpu/softfloat.o
else
LIBOBJS+=fpu/softfloat-native.o
endif
CPPFLAGS+=-I$(SRC_PATH)/fpu

ifeq ($(TARGET_ARCH), i386)
LIBOBJS+=helper.o helper2.o
endif

ifeq ($(TARGET_ARCH), x86_64)
LIBOBJS+=helper.o helper2.o
endif

ifeq ($(TARGET_BASE_ARCH), ppc)
LIBOBJS+= op_helper.o helper.o
endif

ifeq ($(TARGET_BASE_ARCH), mips)
LIBOBJS+= op_helper.o helper.o
endif

ifeq ($(TARGET_BASE_ARCH), sparc)
LIBOBJS+= op_helper.o helper.o
endif

ifeq ($(TARGET_BASE_ARCH), arm)
LIBOBJS+= op_helper.o helper.o
endif

ifeq ($(TARGET_BASE_ARCH), sh4)
LIBOBJS+= op_helper.o helper.o
endif

ifeq ($(TARGET_BASE_ARCH), m68k)
LIBOBJS+= op_helper.o helper.o
endif

ifeq ($(TARGET_BASE_ARCH), alpha)
LIBOBJS+= op_helper.o helper.o alpha_palcode.o
endif

ifeq ($(TARGET_BASE_ARCH), cris)
LIBOBJS+= op_helper.o helper.o
LIBOBJS+= cris-dis.o

ifndef CONFIG_USER_ONLY
LIBOBJS+= mmu.o
endif
endif

# NOTE: the disassembler code is only needed for debugging
LIBOBJS+=disas.o
ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
USE_I386_DIS=y
endif
ifeq ($(findstring x86_64, $(TARGET_ARCH) $(ARCH)),x86_64)
USE_I386_DIS=y
endif
ifdef USE_I386_DIS
LIBOBJS+=i386-dis.o
endif
ifeq ($(findstring alpha, $(TARGET_ARCH) $(ARCH)),alpha)
LIBOBJS+=alpha-dis.o
endif
ifeq ($(findstring ppc, $(TARGET_BASE_ARCH) $(ARCH)),ppc)
LIBOBJS+=ppc-dis.o
endif
ifeq ($(findstring mips, $(TARGET_BASE_ARCH) $(ARCH)),mips)
LIBOBJS+=mips-dis.o
endif
ifeq ($(findstring sparc, $(TARGET_BASE_ARCH) $(ARCH)),sparc)
LIBOBJS+=sparc-dis.o
endif
ifeq ($(findstring arm, $(TARGET_ARCH) $(ARCH)),arm)
LIBOBJS+=arm-dis.o
endif
ifeq ($(findstring m68k, $(TARGET_ARCH) $(ARCH)),m68k)
LIBOBJS+=m68k-dis.o
endif
ifeq ($(findstring sh4, $(TARGET_ARCH) $(ARCH)),sh4)
LIBOBJS+=sh4-dis.o
endif
ifeq ($(findstring s390, $(TARGET_ARCH) $(ARCH)),s390)
LIBOBJS+=s390-dis.o
endif

# libqemu

ifndef CONFIG_NO_DYNGEN_OP
OPC_H = gen-op.h dyngen-opc.h op.h
endif

libqemu.a: $(LIBOBJS)
	rm -f $@
	$(AR) rcs $@ $(LIBOBJS)

translate.o: translate.c cpu.h $(OPC_H)

translate-all.o: translate-all.c cpu.h $(OPC_H)

tcg/tcg.o: cpu.h $(OPC_H)

tcg/tcg-dyngen.o: $(OPC_H)

tcg/tcg-runtime.o: $(OPC_H)

op.h: op.o $(DYNGEN)
	$(DYNGEN) -o $@ $<

dyngen-opc.h: op.o $(DYNGEN)
	$(DYNGEN) -c -o $@ $<

gen-op.h: op.o $(DYNGEN)
	$(DYNGEN) -g -o $@ $<

op.o: op.c
	$(CC) $(OP_CFLAGS) $(CPPFLAGS) -c -o $@ $<

# HELPER_CFLAGS is used for all the code compiled with static register
# variables
ifeq ($(TARGET_BASE_ARCH), i386)
# XXX: rename helper.c to op_helper.c
helper.o: helper.c
	$(CC) $(HELPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) -c -o $@ $<
else
op_helper.o: op_helper.c
	$(CC) $(HELPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) -c -o $@ $<
endif

cpu-exec.o: cpu-exec.c
	$(CC) $(HELPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) -c -o $@ $<

#########################################################
# Linux user emulator target

ifdef CONFIG_LINUX_USER

VPATH+=:$(SRC_PATH)/linux-user
ifndef TARGET_ABI_DIR
  TARGET_ABI_DIR=$(TARGET_ARCH)
endif
CPPFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)

ifdef CONFIG_STATIC
LDFLAGS+=-static
endif

ifeq ($(ARCH),i386)
ifdef TARGET_GPROF
USE_I386_LD=y
endif
ifdef CONFIG_STATIC
USE_I386_LD=y
endif
ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
# that the kernel ELF loader considers as an executable. I think this
# is the simplest way to make it self virtualizable!
LDFLAGS+=-Wl,-shared
endif
endif

ifeq ($(ARCH),x86_64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),ppc)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),s390)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),sparc)
# -static is used to avoid g1/g3 usage by the dynamic linker	
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld -static
endif

ifeq ($(ARCH),sparc64)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),alpha)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),arm)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),m68k)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
endif

ifeq ($(ARCH),mips)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif

ifeq ($(ARCH),mips64)
ifeq ($(WORDS_BIGENDIAN),yes)
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH).ld
else
LDFLAGS+=-Wl,-T,$(SRC_PATH)/$(ARCH)el.ld
endif
endif

OBJS= main.o syscall.o strace.o mmap.o signal.o path.o osdep.o thunk.o \
      elfload.o linuxload.o uaccess.o
LIBS+= $(AIOLIBS)
ifdef TARGET_HAS_BFLT
OBJS+= flatload.o
endif
ifdef TARGET_HAS_ELFLOAD32
OBJS+= elfload32.o
elfload32.o: elfload.c
endif

ifeq ($(TARGET_ARCH), i386)
OBJS+= vm86.o
endif
ifeq ($(TARGET_ARCH), arm)
OBJS+=nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
 nwfpe/double_cpdo.o nwfpe/extended_cpdo.o arm-semi.o
endif
ifeq ($(TARGET_ARCH), m68k)
OBJS+= m68k-sim.o m68k-semi.o
endif

ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o
endif

OBJS+= libqemu.a

# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: signal.c
	$(CC) $(HELPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) -c -o $@ $<

$(QEMU_PROG): $(OBJS)
	$(CC) $(LDFLAGS) -o $@ $^  $(LIBS)
ifeq ($(ARCH),alpha)
# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
# the address space (31 bit so sign extending doesn't matter)
	echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc
endif

endif #CONFIG_LINUX_USER

#########################################################
# Darwin user emulator target

ifdef CONFIG_DARWIN_USER

VPATH+=:$(SRC_PATH)/darwin-user
CPPFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)

# Leave some space for the regular program loading zone
LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000

LIBS+=-lmx

OBJS= main.o commpage.o machload.o mmap.o osdep.o signal.o syscall.o thunk.o

OBJS+= libqemu.a

ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o
endif

# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: signal.c
	$(CC) $(HELPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) -c -o $@ $<

$(QEMU_PROG): $(OBJS)
	$(CC) $(LDFLAGS) -o $@ $^  $(LIBS)

endif #CONFIG_DARWIN_USER

#########################################################
# System emulator target
ifndef CONFIG_USER_ONLY

OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o
ifdef CONFIG_WIN32
OBJS+=block-raw-win32.o
else
OBJS+=block-raw-posix.o
endif

LIBS+=-lz
ifdef CONFIG_ALSA
LIBS += -lasound
endif
ifdef CONFIG_ESD
LIBS += -lesd
endif
ifdef CONFIG_DSOUND
LIBS += -lole32 -ldxguid
endif
ifdef CONFIG_FMOD
LIBS += $(CONFIG_FMOD_LIB)
endif

SOUND_HW = sb16.o es1370.o
ifdef CONFIG_AC97
SOUND_HW += ac97.o
endif
ifdef CONFIG_ADLIB
SOUND_HW += fmopl.o adlib.o
endif
ifdef CONFIG_GUS
SOUND_HW += gus.o gusemu_hal.o gusemu_mixer.o
endif

ifdef CONFIG_VNC_TLS
CPPFLAGS += $(CONFIG_VNC_TLS_CFLAGS)
LIBS += $(CONFIG_VNC_TLS_LIBS)
endif

# SCSI layer
OBJS+= lsi53c895a.o esp.o

# USB layer
OBJS+= usb-ohci.o

# EEPROM emulation
OBJS += eeprom93xx.o

# PCI network cards
OBJS += eepro100.o
OBJS += ne2000.o
OBJS += pcnet.o
OBJS += rtl8139.o
OBJS += e1000.o

ifeq ($(TARGET_BASE_ARCH), i386)
# Hardware support
OBJS+= ide.o pckbd.o ps2.o vga.o $(SOUND_HW) dma.o
OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
OBJS+= cirrus_vga.o apic.o parallel.o acpi.o piix_pci.o
OBJS+= usb-uhci.o vmmouse.o vmport.o vmware_vga.o
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
endif
ifeq ($(TARGET_BASE_ARCH), ppc)
CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
# shared objects
OBJS+= ppc.o ide.o vga.o $(SOUND_HW) dma.o openpic.o
# PREP target
OBJS+= pckbd.o ps2.o serial.o i8259.o i8254.o fdc.o m48t59.o mc146818rtc.o
OBJS+= prep_pci.o ppc_prep.o
# Mac shared devices
OBJS+= macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o
# OldWorld PowerMac
OBJS+= heathrow_pic.o grackle_pci.o ppc_oldworld.o
# NewWorld PowerMac
OBJS+= unin_pci.o ppc_chrp.o
# PowerPC 4xx boards
OBJS+= pflash_cfi02.o ppc4xx_devs.o ppc405_uc.o ppc405_boards.o
endif
ifeq ($(TARGET_BASE_ARCH), mips)
OBJS+= mips_r4k.o mips_malta.o mips_pica61.o mips_mipssim.o
OBJS+= mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o
OBJS+= jazz_led.o
OBJS+= ide.o gt64xxx.o pckbd.o ps2.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
OBJS+= piix_pci.o parallel.o cirrus_vga.o $(SOUND_HW)
OBJS+= mipsnet.o
OBJS+= pflash_cfi01.o
CPPFLAGS += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), cris)
OBJS+= etraxfs.o
OBJS+= etraxfs_pic.o
OBJS+= etraxfs_timer.o
OBJS+= etraxfs_ser.o

OBJS+= ptimer.o
OBJS+= pflash_cfi01.o
endif
ifeq ($(TARGET_BASE_ARCH), sparc)
ifeq ($(TARGET_ARCH), sparc64)
OBJS+= sun4u.o ide.o pckbd.o ps2.o vga.o apb_pci.o
OBJS+= fdc.o mc146818rtc.o serial.o m48t59.o
OBJS+= cirrus_vga.o parallel.o ptimer.o
else
OBJS+= sun4m.o tcx.o pcnet.o iommu.o m48t59.o slavio_intctl.o
OBJS+= slavio_timer.o slavio_serial.o slavio_misc.o fdc.o sparc32_dma.o
OBJS+= cs4231.o ptimer.o eccmemctl.o sbi.o sun4c_intctl.o
endif
endif
ifeq ($(TARGET_BASE_ARCH), arm)
OBJS+= integratorcp.o versatilepb.o ps2.o smc91c111.o arm_pic.o arm_timer.o
OBJS+= arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
OBJS+= versatile_pci.o ptimer.o
OBJS+= realview_gic.o realview.o arm_sysctl.o mpcore.o
OBJS+= armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
OBJS+= pl061.o
OBJS+= arm-semi.o
OBJS+= pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
OBJS+= pflash_cfi01.o gumstix.o
OBJS+= spitz.o ide.o serial.o nand.o ecc.o
OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
OBJS+= palm.o tsc210x.o
OBJS+= mst_fpga.o mainstone.o
CPPFLAGS += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), sh4)
OBJS+= shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
OBJS+= sh_timer.o ptimer.o sh_serial.o sh_intc.o
endif
ifeq ($(TARGET_BASE_ARCH), m68k)
OBJS+= an5206.o mcf5206.o ptimer.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
OBJS+= m68k-semi.o dummy_m68k.o
endif
ifdef CONFIG_GDBSTUB
OBJS+=gdbstub.o
endif
ifdef CONFIG_COCOA
COCOA_LIBS=-F/System/Library/Frameworks -framework Cocoa -framework IOKit
ifdef CONFIG_COREAUDIO
COCOA_LIBS+=-framework CoreAudio
endif
endif
ifdef CONFIG_SLIRP
CPPFLAGS+=-I$(SRC_PATH)/slirp
endif

LIBS+=$(AIOLIBS)
# specific flags are needed for non soft mmu emulator
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
ifndef CONFIG_DARWIN
ifndef CONFIG_WIN32
ifndef CONFIG_SOLARIS
LIBS+=-lutil
endif
endif
endif
ifdef TARGET_GPROF
vl.o: CFLAGS+=-p
LDFLAGS+=-p
endif

ifeq ($(ARCH),ia64)
LDFLAGS+=-Wl,-G0 -Wl,-T,$(SRC_PATH)/ia64.ld
endif

ifdef CONFIG_WIN32
SDL_LIBS := $(filter-out -mwindows, $(SDL_LIBS)) -mconsole
endif

# profiling code
ifdef TARGET_GPROF
LDFLAGS+=-p
main.o: CFLAGS+=-p
endif

$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a
	$(CC) $(LDFLAGS) -o $@ $^ $(LIBS) $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS)

endif # !CONFIG_USER_ONLY

%.o: %.c
	$(CC) $(CPPFLAGS) $(CFLAGS) -c -o $@ $<

%.o: %.S
	$(CC) $(CPPFLAGS) -c -o $@ $<

clean:
	rm -f *.o *.a *~ $(PROGS) gen-op.h dyngen-opc.h op.h nwfpe/*.o fpu/*.o
	rm -f *.d */*.d tcg/*.o

install: all
ifneq ($(PROGS),)
	$(INSTALL) -m 755 -s $(PROGS) "$(DESTDIR)$(bindir)"
endif

# Include automatically generated dependency files
-include $(wildcard *.d */*.d)