| /* |
| * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator |
| * |
| * Hypercall based emulated RTAS |
| * |
| * Copyright (c) 2010-2011 David Gibson, IBM Corporation. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| * |
| */ |
| #include "cpu.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/char.h" |
| #include "hw/qdev.h" |
| #include "sysemu/device_tree.h" |
| |
| #include "hw/ppc/spapr.h" |
| #include "hw/ppc/spapr_vio.h" |
| #include "qapi-event.h" |
| |
| #include <libfdt.h> |
| |
| static void rtas_display_character(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| uint8_t c = rtas_ld(args, 0); |
| VIOsPAPRDevice *sdev = vty_lookup(spapr, 0); |
| |
| if (!sdev) { |
| rtas_st(rets, 0, RTAS_OUT_HW_ERROR); |
| } else { |
| vty_putchars(sdev, &c, sizeof(c)); |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| } |
| |
| static void rtas_get_time_of_day(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| struct tm tm; |
| |
| if (nret != 8) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| qemu_get_timedate(&tm, spapr->rtc_offset); |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| rtas_st(rets, 1, tm.tm_year + 1900); |
| rtas_st(rets, 2, tm.tm_mon + 1); |
| rtas_st(rets, 3, tm.tm_mday); |
| rtas_st(rets, 4, tm.tm_hour); |
| rtas_st(rets, 5, tm.tm_min); |
| rtas_st(rets, 6, tm.tm_sec); |
| rtas_st(rets, 7, 0); /* we don't do nanoseconds */ |
| } |
| |
| static void rtas_set_time_of_day(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| struct tm tm; |
| |
| tm.tm_year = rtas_ld(args, 0) - 1900; |
| tm.tm_mon = rtas_ld(args, 1) - 1; |
| tm.tm_mday = rtas_ld(args, 2); |
| tm.tm_hour = rtas_ld(args, 3); |
| tm.tm_min = rtas_ld(args, 4); |
| tm.tm_sec = rtas_ld(args, 5); |
| |
| /* Just generate a monitor event for the change */ |
| qapi_event_send_rtc_change(qemu_timedate_diff(&tm), &error_abort); |
| spapr->rtc_offset = qemu_timedate_diff(&tm); |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| |
| static void rtas_power_off(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| if (nargs != 2 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| qemu_system_shutdown_request(); |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| |
| static void rtas_system_reboot(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| if (nargs != 0 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| qemu_system_reset_request(); |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| |
| static void rtas_query_cpu_stopped_state(PowerPCCPU *cpu_, |
| sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong id; |
| PowerPCCPU *cpu; |
| |
| if (nargs != 1 || nret != 2) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| id = rtas_ld(args, 0); |
| cpu = ppc_get_vcpu_by_dt_id(id); |
| if (cpu != NULL) { |
| if (CPU(cpu)->halted) { |
| rtas_st(rets, 1, 0); |
| } else { |
| rtas_st(rets, 1, 2); |
| } |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| return; |
| } |
| |
| /* Didn't find a matching cpu */ |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| } |
| |
| static void rtas_start_cpu(PowerPCCPU *cpu_, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong id, start, r3; |
| PowerPCCPU *cpu; |
| |
| if (nargs != 3 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| id = rtas_ld(args, 0); |
| start = rtas_ld(args, 1); |
| r3 = rtas_ld(args, 2); |
| |
| cpu = ppc_get_vcpu_by_dt_id(id); |
| if (cpu != NULL) { |
| CPUState *cs = CPU(cpu); |
| CPUPPCState *env = &cpu->env; |
| |
| if (!cs->halted) { |
| rtas_st(rets, 0, RTAS_OUT_HW_ERROR); |
| return; |
| } |
| |
| /* This will make sure qemu state is up to date with kvm, and |
| * mark it dirty so our changes get flushed back before the |
| * new cpu enters */ |
| kvm_cpu_synchronize_state(cs); |
| |
| env->msr = (1ULL << MSR_SF) | (1ULL << MSR_ME); |
| env->nip = start; |
| env->gpr[3] = r3; |
| cs->halted = 0; |
| |
| qemu_cpu_kick(cs); |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| return; |
| } |
| |
| /* Didn't find a matching cpu */ |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| } |
| |
| static void rtas_stop_self(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| CPUState *cs = CPU(cpu); |
| CPUPPCState *env = &cpu->env; |
| |
| cs->halted = 1; |
| cpu_exit(cs); |
| /* |
| * While stopping a CPU, the guest calls H_CPPR which |
| * effectively disables interrupts on XICS level. |
| * However decrementer interrupts in TCG can still |
| * wake the CPU up so here we disable interrupts in MSR |
| * as well. |
| * As rtas_start_cpu() resets the whole MSR anyway, there is |
| * no need to bother with specific bits, we just clear it. |
| */ |
| env->msr = 0; |
| } |
| |
| static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, |
| sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong parameter = rtas_ld(args, 0); |
| target_ulong buffer = rtas_ld(args, 1); |
| target_ulong length = rtas_ld(args, 2); |
| target_ulong ret = RTAS_OUT_SUCCESS; |
| |
| switch (parameter) { |
| case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS: { |
| char *param_val = g_strdup_printf("MaxEntCap=%d,MaxPlatProcs=%d", |
| max_cpus, smp_cpus); |
| rtas_st_buffer(buffer, length, (uint8_t *)param_val, strlen(param_val)); |
| g_free(param_val); |
| break; |
| } |
| case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE: { |
| uint8_t param_val = DIAGNOSTICS_RUN_MODE_DISABLED; |
| |
| rtas_st_buffer(buffer, length, ¶m_val, sizeof(param_val)); |
| break; |
| } |
| case RTAS_SYSPARM_UUID: |
| rtas_st_buffer(buffer, length, qemu_uuid, (qemu_uuid_set ? 16 : 0)); |
| break; |
| default: |
| ret = RTAS_OUT_NOT_SUPPORTED; |
| } |
| |
| rtas_st(rets, 0, ret); |
| } |
| |
| static void rtas_ibm_set_system_parameter(PowerPCCPU *cpu, |
| sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong parameter = rtas_ld(args, 0); |
| target_ulong ret = RTAS_OUT_NOT_SUPPORTED; |
| |
| switch (parameter) { |
| case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS: |
| case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE: |
| case RTAS_SYSPARM_UUID: |
| ret = RTAS_OUT_NOT_AUTHORIZED; |
| break; |
| } |
| |
| rtas_st(rets, 0, ret); |
| } |
| |
| static void rtas_ibm_os_term(PowerPCCPU *cpu, |
| sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong ret = 0; |
| |
| qapi_event_send_guest_panicked(GUEST_PANIC_ACTION_PAUSE, &error_abort); |
| |
| rtas_st(rets, 0, ret); |
| } |
| |
| static struct rtas_call { |
| const char *name; |
| spapr_rtas_fn fn; |
| } rtas_table[RTAS_TOKEN_MAX - RTAS_TOKEN_BASE]; |
| |
| target_ulong spapr_rtas_call(PowerPCCPU *cpu, sPAPREnvironment *spapr, |
| uint32_t token, uint32_t nargs, target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| if ((token >= RTAS_TOKEN_BASE) && (token < RTAS_TOKEN_MAX)) { |
| struct rtas_call *call = rtas_table + (token - RTAS_TOKEN_BASE); |
| |
| if (call->fn) { |
| call->fn(cpu, spapr, token, nargs, args, nret, rets); |
| return H_SUCCESS; |
| } |
| } |
| |
| /* HACK: Some Linux early debug code uses RTAS display-character, |
| * but assumes the token value is 0xa (which it is on some real |
| * machines) without looking it up in the device tree. This |
| * special case makes this work */ |
| if (token == 0xa) { |
| rtas_display_character(cpu, spapr, 0xa, nargs, args, nret, rets); |
| return H_SUCCESS; |
| } |
| |
| hcall_dprintf("Unknown RTAS token 0x%x\n", token); |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return H_PARAMETER; |
| } |
| |
| void spapr_rtas_register(int token, const char *name, spapr_rtas_fn fn) |
| { |
| if (!((token >= RTAS_TOKEN_BASE) && (token < RTAS_TOKEN_MAX))) { |
| fprintf(stderr, "RTAS invalid token 0x%x\n", token); |
| exit(1); |
| } |
| |
| token -= RTAS_TOKEN_BASE; |
| if (rtas_table[token].name) { |
| fprintf(stderr, "RTAS call \"%s\" is registered already as 0x%x\n", |
| rtas_table[token].name, token); |
| exit(1); |
| } |
| |
| rtas_table[token].name = name; |
| rtas_table[token].fn = fn; |
| } |
| |
| int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr, |
| hwaddr rtas_size) |
| { |
| int ret; |
| int i; |
| |
| ret = fdt_add_mem_rsv(fdt, rtas_addr, rtas_size); |
| if (ret < 0) { |
| fprintf(stderr, "Couldn't add RTAS reserve entry: %s\n", |
| fdt_strerror(ret)); |
| return ret; |
| } |
| |
| ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-base", |
| rtas_addr); |
| if (ret < 0) { |
| fprintf(stderr, "Couldn't add linux,rtas-base property: %s\n", |
| fdt_strerror(ret)); |
| return ret; |
| } |
| |
| ret = qemu_fdt_setprop_cell(fdt, "/rtas", "linux,rtas-entry", |
| rtas_addr); |
| if (ret < 0) { |
| fprintf(stderr, "Couldn't add linux,rtas-entry property: %s\n", |
| fdt_strerror(ret)); |
| return ret; |
| } |
| |
| ret = qemu_fdt_setprop_cell(fdt, "/rtas", "rtas-size", |
| rtas_size); |
| if (ret < 0) { |
| fprintf(stderr, "Couldn't add rtas-size property: %s\n", |
| fdt_strerror(ret)); |
| return ret; |
| } |
| |
| for (i = 0; i < RTAS_TOKEN_MAX - RTAS_TOKEN_BASE; i++) { |
| struct rtas_call *call = &rtas_table[i]; |
| |
| if (!call->name) { |
| continue; |
| } |
| |
| ret = qemu_fdt_setprop_cell(fdt, "/rtas", call->name, |
| i + RTAS_TOKEN_BASE); |
| if (ret < 0) { |
| fprintf(stderr, "Couldn't add rtas token for %s: %s\n", |
| call->name, fdt_strerror(ret)); |
| return ret; |
| } |
| |
| } |
| return 0; |
| } |
| |
| static void core_rtas_register_types(void) |
| { |
| spapr_rtas_register(RTAS_DISPLAY_CHARACTER, "display-character", |
| rtas_display_character); |
| spapr_rtas_register(RTAS_GET_TIME_OF_DAY, "get-time-of-day", |
| rtas_get_time_of_day); |
| spapr_rtas_register(RTAS_SET_TIME_OF_DAY, "set-time-of-day", |
| rtas_set_time_of_day); |
| spapr_rtas_register(RTAS_POWER_OFF, "power-off", rtas_power_off); |
| spapr_rtas_register(RTAS_SYSTEM_REBOOT, "system-reboot", |
| rtas_system_reboot); |
| spapr_rtas_register(RTAS_QUERY_CPU_STOPPED_STATE, "query-cpu-stopped-state", |
| rtas_query_cpu_stopped_state); |
| spapr_rtas_register(RTAS_START_CPU, "start-cpu", rtas_start_cpu); |
| spapr_rtas_register(RTAS_STOP_SELF, "stop-self", rtas_stop_self); |
| spapr_rtas_register(RTAS_IBM_GET_SYSTEM_PARAMETER, |
| "ibm,get-system-parameter", |
| rtas_ibm_get_system_parameter); |
| spapr_rtas_register(RTAS_IBM_SET_SYSTEM_PARAMETER, |
| "ibm,set-system-parameter", |
| rtas_ibm_set_system_parameter); |
| spapr_rtas_register(RTAS_IBM_OS_TERM, "ibm,os-term", |
| rtas_ibm_os_term); |
| } |
| |
| type_init(core_rtas_register_types) |