/*
 * PXA270-based Clamshell PDA platforms.
 *
 * Copyright (c) 2006 Openedhand Ltd.
 * Written by Andrzej Zaborowski <balrog@zabor.org>
 *
 * This code is licensed under the GNU GPL v2.
 *
 * Contributions after 2012-01-13 are licensed under the terms of the
 * GNU GPL, version 2 or (at your option) any later version.
 */

#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/arm/pxa.h"
#include "hw/arm/boot.h"
#include "sysemu/runstate.h"
#include "sysemu/sysemu.h"
#include "hw/pcmcia.h"
#include "hw/qdev-properties.h"
#include "hw/i2c/i2c.h"
#include "hw/irq.h"
#include "hw/ssi/ssi.h"
#include "hw/block/flash.h"
#include "qemu/timer.h"
#include "qemu/log.h"
#include "hw/arm/sharpsl.h"
#include "ui/console.h"
#include "hw/audio/wm8750.h"
#include "audio/audio.h"
#include "hw/boards.h"
#include "hw/sysbus.h"
#include "hw/adc/max111x.h"
#include "migration/vmstate.h"
#include "exec/address-spaces.h"
#include "qom/object.h"
#include "audio/audio.h"

enum spitz_model_e { spitz, akita, borzoi, terrier };

struct SpitzMachineClass {
    MachineClass parent;
    enum spitz_model_e model;
    int arm_id;
};

struct SpitzMachineState {
    MachineState parent;
    PXA2xxState *mpu;
    DeviceState *mux;
    DeviceState *lcdtg;
    DeviceState *ads7846;
    DeviceState *max1111;
    DeviceState *scp0;
    DeviceState *scp1;
    DeviceState *misc_gpio;
};

#define TYPE_SPITZ_MACHINE "spitz-common"
OBJECT_DECLARE_TYPE(SpitzMachineState, SpitzMachineClass, SPITZ_MACHINE)

#define zaurus_printf(format, ...)                              \
    fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__)

/* Spitz Flash */
#define FLASH_BASE              0x0c000000
#define FLASH_ECCLPLB           0x00    /* Line parity 7 - 0 bit */
#define FLASH_ECCLPUB           0x04    /* Line parity 15 - 8 bit */
#define FLASH_ECCCP             0x08    /* Column parity 5 - 0 bit */
#define FLASH_ECCCNTR           0x0c    /* ECC byte counter */
#define FLASH_ECCCLRR           0x10    /* Clear ECC */
#define FLASH_FLASHIO           0x14    /* Flash I/O */
#define FLASH_FLASHCTL          0x18    /* Flash Control */

#define FLASHCTL_CE0            (1 << 0)
#define FLASHCTL_CLE            (1 << 1)
#define FLASHCTL_ALE            (1 << 2)
#define FLASHCTL_WP             (1 << 3)
#define FLASHCTL_CE1            (1 << 4)
#define FLASHCTL_RYBY           (1 << 5)
#define FLASHCTL_NCE            (FLASHCTL_CE0 | FLASHCTL_CE1)

#define TYPE_SL_NAND "sl-nand"
OBJECT_DECLARE_SIMPLE_TYPE(SLNANDState, SL_NAND)

struct SLNANDState {
    SysBusDevice parent_obj;

    MemoryRegion iomem;
    DeviceState *nand;
    uint8_t ctl;
    uint8_t manf_id;
    uint8_t chip_id;
    ECCState ecc;
};

static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size)
{
    SLNANDState *s = (SLNANDState *) opaque;
    int ryby;

    switch (addr) {
#define BSHR(byte, from, to)    ((s->ecc.lp[byte] >> (from - to)) & (1 << to))
    case FLASH_ECCLPLB:
        return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) |
                BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7);

#define BSHL(byte, from, to)    ((s->ecc.lp[byte] << (to - from)) & (1 << to))
    case FLASH_ECCLPUB:
        return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) |
                BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7);

    case FLASH_ECCCP:
        return s->ecc.cp;

    case FLASH_ECCCNTR:
        return s->ecc.count & 0xff;

    case FLASH_FLASHCTL:
        nand_getpins(s->nand, &ryby);
        if (ryby)
            return s->ctl | FLASHCTL_RYBY;
        else
            return s->ctl;

    case FLASH_FLASHIO:
        if (size == 4) {
            return ecc_digest(&s->ecc, nand_getio(s->nand)) |
                (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16);
        }
        return ecc_digest(&s->ecc, nand_getio(s->nand));

    default:
        qemu_log_mask(LOG_GUEST_ERROR,
                      "sl_read: bad register offset 0x%02" HWADDR_PRIx "\n",
                      addr);
    }
    return 0;
}

static void sl_write(void *opaque, hwaddr addr,
                     uint64_t value, unsigned size)
{
    SLNANDState *s = (SLNANDState *) opaque;

    switch (addr) {
    case FLASH_ECCCLRR:
        /* Value is ignored.  */
        ecc_reset(&s->ecc);
        break;

    case FLASH_FLASHCTL:
        s->ctl = value & 0xff & ~FLASHCTL_RYBY;
        nand_setpins(s->nand,
                        s->ctl & FLASHCTL_CLE,
                        s->ctl & FLASHCTL_ALE,
                        s->ctl & FLASHCTL_NCE,
                        s->ctl & FLASHCTL_WP,
                        0);
        break;

    case FLASH_FLASHIO:
        nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff));
        break;

    default:
        qemu_log_mask(LOG_GUEST_ERROR,
                      "sl_write: bad register offset 0x%02" HWADDR_PRIx "\n",
                      addr);
    }
}

enum {
    FLASH_128M,
    FLASH_1024M,
};

static const MemoryRegionOps sl_ops = {
    .read = sl_read,
    .write = sl_write,
    .endianness = DEVICE_NATIVE_ENDIAN,
};

static void sl_flash_register(PXA2xxState *cpu, int size)
{
    DeviceState *dev;

    dev = qdev_new(TYPE_SL_NAND);

    qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG);
    if (size == FLASH_128M)
        qdev_prop_set_uint8(dev, "chip_id", 0x73);
    else if (size == FLASH_1024M)
        qdev_prop_set_uint8(dev, "chip_id", 0xf1);

    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE);
}

static void sl_nand_init(Object *obj)
{
    SLNANDState *s = SL_NAND(obj);
    SysBusDevice *dev = SYS_BUS_DEVICE(obj);

    s->ctl = 0;

    memory_region_init_io(&s->iomem, obj, &sl_ops, s, "sl", 0x40);
    sysbus_init_mmio(dev, &s->iomem);
}

static void sl_nand_realize(DeviceState *dev, Error **errp)
{
    SLNANDState *s = SL_NAND(dev);
    DriveInfo *nand;

    /* FIXME use a qdev drive property instead of drive_get() */
    nand = drive_get(IF_MTD, 0, 0);
    s->nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL,
                        s->manf_id, s->chip_id);
}

/* Spitz Keyboard */

#define SPITZ_KEY_STROBE_NUM    11
#define SPITZ_KEY_SENSE_NUM     7

static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = {
    12, 17, 91, 34, 36, 38, 39
};

static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = {
    88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114
};

/* Eighth additional row maps the special keys */
static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = {
    { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 },
    {  -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 },
    { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25,  -1 ,  -1 ,  -1  },
    { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26,  -1 , 0x36,  -1  },
    { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34,  -1 , 0x1c, 0x2a,  -1  },
    { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33,  -1 , 0x48,  -1 ,  -1 , 0x38 },
    { 0x37, 0x3d,  -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d,  -1 ,  -1  },
    { 0x52, 0x43, 0x01, 0x47, 0x49,  -1 ,  -1 ,  -1 ,  -1 ,  -1 ,  -1  },
};

#define SPITZ_GPIO_AK_INT       13      /* Remote control */
#define SPITZ_GPIO_SYNC                 16      /* Sync button */
#define SPITZ_GPIO_ON_KEY       95      /* Power button */
#define SPITZ_GPIO_SWA          97      /* Lid */
#define SPITZ_GPIO_SWB          96      /* Tablet mode */

/* The special buttons are mapped to unused keys */
static const int spitz_gpiomap[5] = {
    SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY,
    SPITZ_GPIO_SWA, SPITZ_GPIO_SWB,
};

#define TYPE_SPITZ_KEYBOARD "spitz-keyboard"
OBJECT_DECLARE_SIMPLE_TYPE(SpitzKeyboardState, SPITZ_KEYBOARD)

struct SpitzKeyboardState {
    SysBusDevice parent_obj;

    qemu_irq sense[SPITZ_KEY_SENSE_NUM];
    qemu_irq gpiomap[5];
    int keymap[0x80];
    uint16_t keyrow[SPITZ_KEY_SENSE_NUM];
    uint16_t strobe_state;
    uint16_t sense_state;

    uint16_t pre_map[0x100];
    uint16_t modifiers;
    uint16_t imodifiers;
    uint8_t fifo[16];
    int fifopos, fifolen;
    QEMUTimer *kbdtimer;
};

static void spitz_keyboard_sense_update(SpitzKeyboardState *s)
{
    int i;
    uint16_t strobe, sense = 0;
    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) {
        strobe = s->keyrow[i] & s->strobe_state;
        if (strobe) {
            sense |= 1 << i;
            if (!(s->sense_state & (1 << i)))
                qemu_irq_raise(s->sense[i]);
        } else if (s->sense_state & (1 << i))
            qemu_irq_lower(s->sense[i]);
    }

    s->sense_state = sense;
}

static void spitz_keyboard_strobe(void *opaque, int line, int level)
{
    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;

    if (level)
        s->strobe_state |= 1 << line;
    else
        s->strobe_state &= ~(1 << line);
    spitz_keyboard_sense_update(s);
}

static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode)
{
    int spitz_keycode = s->keymap[keycode & 0x7f];
    if (spitz_keycode == -1)
        return;

    /* Handle the additional keys */
    if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {
        qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80));
        return;
    }

    if (keycode & 0x80)
        s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf));
    else
        s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf);

    spitz_keyboard_sense_update(s);
}

#define SPITZ_MOD_SHIFT   (1 << 7)
#define SPITZ_MOD_CTRL    (1 << 8)
#define SPITZ_MOD_FN      (1 << 9)

#define QUEUE_KEY(c)    s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c

static void spitz_keyboard_handler(void *opaque, int keycode)
{
    SpitzKeyboardState *s = opaque;
    uint16_t code;
    int mapcode;
    switch (keycode) {
    case 0x2a:  /* Left Shift */
        s->modifiers |= 1;
        break;
    case 0xaa:
        s->modifiers &= ~1;
        break;
    case 0x36:  /* Right Shift */
        s->modifiers |= 2;
        break;
    case 0xb6:
        s->modifiers &= ~2;
        break;
    case 0x1d:  /* Control */
        s->modifiers |= 4;
        break;
    case 0x9d:
        s->modifiers &= ~4;
        break;
    case 0x38:  /* Alt */
        s->modifiers |= 8;
        break;
    case 0xb8:
        s->modifiers &= ~8;
        break;
    }

    code = s->pre_map[mapcode = ((s->modifiers & 3) ?
            (keycode | SPITZ_MOD_SHIFT) :
            (keycode & ~SPITZ_MOD_SHIFT))];

    if (code != mapcode) {
#if 0
        if ((code & SPITZ_MOD_SHIFT) && !(s->modifiers & 1)) {
            QUEUE_KEY(0x2a | (keycode & 0x80));
        }
        if ((code & SPITZ_MOD_CTRL) && !(s->modifiers & 4)) {
            QUEUE_KEY(0x1d | (keycode & 0x80));
        }
        if ((code & SPITZ_MOD_FN) && !(s->modifiers & 8)) {
            QUEUE_KEY(0x38 | (keycode & 0x80));
        }
        if ((code & SPITZ_MOD_FN) && (s->modifiers & 1)) {
            QUEUE_KEY(0x2a | (~keycode & 0x80));
        }
        if ((code & SPITZ_MOD_FN) && (s->modifiers & 2)) {
            QUEUE_KEY(0x36 | (~keycode & 0x80));
        }
#else
        if (keycode & 0x80) {
            if ((s->imodifiers & 1   ) && !(s->modifiers & 1))
                QUEUE_KEY(0x2a | 0x80);
            if ((s->imodifiers & 4   ) && !(s->modifiers & 4))
                QUEUE_KEY(0x1d | 0x80);
            if ((s->imodifiers & 8   ) && !(s->modifiers & 8))
                QUEUE_KEY(0x38 | 0x80);
            if ((s->imodifiers & 0x10) && (s->modifiers & 1))
                QUEUE_KEY(0x2a);
            if ((s->imodifiers & 0x20) && (s->modifiers & 2))
                QUEUE_KEY(0x36);
            s->imodifiers = 0;
        } else {
            if ((code & SPITZ_MOD_SHIFT) &&
                !((s->modifiers | s->imodifiers) & 1)) {
                QUEUE_KEY(0x2a);
                s->imodifiers |= 1;
            }
            if ((code & SPITZ_MOD_CTRL) &&
                !((s->modifiers | s->imodifiers) & 4)) {
                QUEUE_KEY(0x1d);
                s->imodifiers |= 4;
            }
            if ((code & SPITZ_MOD_FN) &&
                !((s->modifiers | s->imodifiers) & 8)) {
                QUEUE_KEY(0x38);
                s->imodifiers |= 8;
            }
            if ((code & SPITZ_MOD_FN) && (s->modifiers & 1) &&
                            !(s->imodifiers & 0x10)) {
                QUEUE_KEY(0x2a | 0x80);
                s->imodifiers |= 0x10;
            }
            if ((code & SPITZ_MOD_FN) && (s->modifiers & 2) &&
                            !(s->imodifiers & 0x20)) {
                QUEUE_KEY(0x36 | 0x80);
                s->imodifiers |= 0x20;
            }
        }
#endif
    }

    QUEUE_KEY((code & 0x7f) | (keycode & 0x80));
}

static void spitz_keyboard_tick(void *opaque)
{
    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;

    if (s->fifolen) {
        spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]);
        s->fifolen --;
        if (s->fifopos >= 16)
            s->fifopos = 0;
    }

    timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
                   NANOSECONDS_PER_SECOND / 32);
}

static void spitz_keyboard_pre_map(SpitzKeyboardState *s)
{
    int i;
    for (i = 0; i < 0x100; i ++)
        s->pre_map[i] = i;
    s->pre_map[0x02 | SPITZ_MOD_SHIFT] = 0x02 | SPITZ_MOD_SHIFT; /* exclam */
    s->pre_map[0x28 | SPITZ_MOD_SHIFT] = 0x03 | SPITZ_MOD_SHIFT; /* quotedbl */
    s->pre_map[0x04 | SPITZ_MOD_SHIFT] = 0x04 | SPITZ_MOD_SHIFT; /* # */
    s->pre_map[0x05 | SPITZ_MOD_SHIFT] = 0x05 | SPITZ_MOD_SHIFT; /* dollar */
    s->pre_map[0x06 | SPITZ_MOD_SHIFT] = 0x06 | SPITZ_MOD_SHIFT; /* percent */
    s->pre_map[0x08 | SPITZ_MOD_SHIFT] = 0x07 | SPITZ_MOD_SHIFT; /* ampersand */
    s->pre_map[0x28]                   = 0x08 | SPITZ_MOD_SHIFT; /* ' */
    s->pre_map[0x0a | SPITZ_MOD_SHIFT] = 0x09 | SPITZ_MOD_SHIFT; /* ( */
    s->pre_map[0x0b | SPITZ_MOD_SHIFT] = 0x0a | SPITZ_MOD_SHIFT; /* ) */
    s->pre_map[0x29 | SPITZ_MOD_SHIFT] = 0x0b | SPITZ_MOD_SHIFT; /* tilde */
    s->pre_map[0x03 | SPITZ_MOD_SHIFT] = 0x0c | SPITZ_MOD_SHIFT; /* at */
    s->pre_map[0xd3]                   = 0x0e | SPITZ_MOD_FN;    /* Delete */
    s->pre_map[0x3a]                   = 0x0f | SPITZ_MOD_FN;    /* Caps_Lock */
    s->pre_map[0x07 | SPITZ_MOD_SHIFT] = 0x11 | SPITZ_MOD_FN;    /* ^ */
    s->pre_map[0x0d]                   = 0x12 | SPITZ_MOD_FN;    /* equal */
    s->pre_map[0x0d | SPITZ_MOD_SHIFT] = 0x13 | SPITZ_MOD_FN;    /* plus */
    s->pre_map[0x1a]                   = 0x14 | SPITZ_MOD_FN;    /* [ */
    s->pre_map[0x1b]                   = 0x15 | SPITZ_MOD_FN;    /* ] */
    s->pre_map[0x1a | SPITZ_MOD_SHIFT] = 0x16 | SPITZ_MOD_FN;    /* { */
    s->pre_map[0x1b | SPITZ_MOD_SHIFT] = 0x17 | SPITZ_MOD_FN;    /* } */
    s->pre_map[0x27]                   = 0x22 | SPITZ_MOD_FN;    /* semicolon */
    s->pre_map[0x27 | SPITZ_MOD_SHIFT] = 0x23 | SPITZ_MOD_FN;    /* colon */
    s->pre_map[0x09 | SPITZ_MOD_SHIFT] = 0x24 | SPITZ_MOD_FN;    /* asterisk */
    s->pre_map[0x2b]                   = 0x25 | SPITZ_MOD_FN;    /* backslash */
    s->pre_map[0x2b | SPITZ_MOD_SHIFT] = 0x26 | SPITZ_MOD_FN;    /* bar */
    s->pre_map[0x0c | SPITZ_MOD_SHIFT] = 0x30 | SPITZ_MOD_FN;    /* _ */
    s->pre_map[0x33 | SPITZ_MOD_SHIFT] = 0x33 | SPITZ_MOD_FN;    /* less */
    s->pre_map[0x35]                   = 0x33 | SPITZ_MOD_SHIFT; /* slash */
    s->pre_map[0x34 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_FN;    /* greater */
    s->pre_map[0x35 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_SHIFT; /* question */
    s->pre_map[0x49]                   = 0x48 | SPITZ_MOD_FN;    /* Page_Up */
    s->pre_map[0x51]                   = 0x50 | SPITZ_MOD_FN;    /* Page_Down */

    s->modifiers = 0;
    s->imodifiers = 0;
    s->fifopos = 0;
    s->fifolen = 0;
}

#undef SPITZ_MOD_SHIFT
#undef SPITZ_MOD_CTRL
#undef SPITZ_MOD_FN

static int spitz_keyboard_post_load(void *opaque, int version_id)
{
    SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;

    /* Release all pressed keys */
    memset(s->keyrow, 0, sizeof(s->keyrow));
    spitz_keyboard_sense_update(s);
    s->modifiers = 0;
    s->imodifiers = 0;
    s->fifopos = 0;
    s->fifolen = 0;

    return 0;
}

static void spitz_keyboard_register(PXA2xxState *cpu)
{
    int i;
    DeviceState *dev;
    SpitzKeyboardState *s;

    dev = sysbus_create_simple(TYPE_SPITZ_KEYBOARD, -1, NULL);
    s = SPITZ_KEYBOARD(dev);

    for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++)
        qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i]));

    for (i = 0; i < 5; i ++)
        s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]);

    if (!graphic_rotate)
        s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]);

    for (i = 0; i < 5; i++)
        qemu_set_irq(s->gpiomap[i], 0);

    for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
        qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i],
                qdev_get_gpio_in(dev, i));

    timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));

    qemu_add_kbd_event_handler(spitz_keyboard_handler, s);
}

static void spitz_keyboard_init(Object *obj)
{
    DeviceState *dev = DEVICE(obj);
    SpitzKeyboardState *s = SPITZ_KEYBOARD(obj);
    int i, j;

    for (i = 0; i < 0x80; i ++)
        s->keymap[i] = -1;
    for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++)
        for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++)
            if (spitz_keymap[i][j] != -1)
                s->keymap[spitz_keymap[i][j]] = (i << 4) | j;

    spitz_keyboard_pre_map(s);

    qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM);
    qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM);
}

static void spitz_keyboard_realize(DeviceState *dev, Error **errp)
{
    SpitzKeyboardState *s = SPITZ_KEYBOARD(dev);
    s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s);
}

/* LCD backlight controller */

#define LCDTG_RESCTL    0x00
#define LCDTG_PHACTRL   0x01
#define LCDTG_DUTYCTRL  0x02
#define LCDTG_POWERREG0         0x03
#define LCDTG_POWERREG1         0x04
#define LCDTG_GPOR3     0x05
#define LCDTG_PICTRL    0x06
#define LCDTG_POLCTRL   0x07

#define TYPE_SPITZ_LCDTG "spitz-lcdtg"
OBJECT_DECLARE_SIMPLE_TYPE(SpitzLCDTG, SPITZ_LCDTG)

struct SpitzLCDTG {
    SSIPeripheral ssidev;
    uint32_t bl_intensity;
    uint32_t bl_power;
};

static void spitz_bl_update(SpitzLCDTG *s)
{
    if (s->bl_power && s->bl_intensity)
        zaurus_printf("LCD Backlight now at %u/63\n", s->bl_intensity);
    else
        zaurus_printf("LCD Backlight now off\n");
}

static inline void spitz_bl_bit5(void *opaque, int line, int level)
{
    SpitzLCDTG *s = opaque;
    int prev = s->bl_intensity;

    if (level)
        s->bl_intensity &= ~0x20;
    else
        s->bl_intensity |= 0x20;

    if (s->bl_power && prev != s->bl_intensity)
        spitz_bl_update(s);
}

static inline void spitz_bl_power(void *opaque, int line, int level)
{
    SpitzLCDTG *s = opaque;
    s->bl_power = !!level;
    spitz_bl_update(s);
}

static uint32_t spitz_lcdtg_transfer(SSIPeripheral *dev, uint32_t value)
{
    SpitzLCDTG *s = SPITZ_LCDTG(dev);
    int addr;
    addr = value >> 5;
    value &= 0x1f;

    switch (addr) {
    case LCDTG_RESCTL:
        if (value)
            zaurus_printf("LCD in QVGA mode\n");
        else
            zaurus_printf("LCD in VGA mode\n");
        break;

    case LCDTG_DUTYCTRL:
        s->bl_intensity &= ~0x1f;
        s->bl_intensity |= value;
        if (s->bl_power)
            spitz_bl_update(s);
        break;

    case LCDTG_POWERREG0:
        /* Set common voltage to M62332FP */
        break;
    }
    return 0;
}

static void spitz_lcdtg_realize(SSIPeripheral *ssi, Error **errp)
{
    SpitzLCDTG *s = SPITZ_LCDTG(ssi);
    DeviceState *dev = DEVICE(s);

    s->bl_power = 0;
    s->bl_intensity = 0x20;

    qdev_init_gpio_in_named(dev, spitz_bl_bit5, "bl_bit5", 1);
    qdev_init_gpio_in_named(dev, spitz_bl_power, "bl_power", 1);
}

/* SSP devices */

#define CORGI_SSP_PORT          2

#define SPITZ_GPIO_LCDCON_CS    53
#define SPITZ_GPIO_ADS7846_CS   14
#define SPITZ_GPIO_MAX1111_CS   20
#define SPITZ_GPIO_TP_INT       11

#define TYPE_CORGI_SSP "corgi-ssp"
OBJECT_DECLARE_SIMPLE_TYPE(CorgiSSPState, CORGI_SSP)

/* "Demux" the signal based on current chipselect */
struct CorgiSSPState {
    SSIPeripheral ssidev;
    SSIBus *bus[3];
    uint32_t enable[3];
};

static uint32_t corgi_ssp_transfer(SSIPeripheral *dev, uint32_t value)
{
    CorgiSSPState *s = CORGI_SSP(dev);
    int i;

    for (i = 0; i < 3; i++) {
        if (s->enable[i]) {
            return ssi_transfer(s->bus[i], value);
        }
    }
    return 0;
}

static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
{
    CorgiSSPState *s = (CorgiSSPState *)opaque;
    assert(line >= 0 && line < 3);
    s->enable[line] = !level;
}

#define MAX1111_BATT_VOLT       1
#define MAX1111_BATT_TEMP       2
#define MAX1111_ACIN_VOLT       3

#define SPITZ_BATTERY_TEMP      0xe0    /* About 2.9V */
#define SPITZ_BATTERY_VOLT      0xd0    /* About 4.0V */
#define SPITZ_CHARGEON_ACIN     0x80    /* About 5.0V */

static void corgi_ssp_realize(SSIPeripheral *d, Error **errp)
{
    DeviceState *dev = DEVICE(d);
    CorgiSSPState *s = CORGI_SSP(d);

    qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3);
    s->bus[0] = ssi_create_bus(dev, "ssi0");
    s->bus[1] = ssi_create_bus(dev, "ssi1");
    s->bus[2] = ssi_create_bus(dev, "ssi2");
}

static void spitz_ssp_attach(SpitzMachineState *sms)
{
    void *bus;

    sms->mux = ssi_create_peripheral(sms->mpu->ssp[CORGI_SSP_PORT - 1],
                                     TYPE_CORGI_SSP);

    bus = qdev_get_child_bus(sms->mux, "ssi0");
    sms->lcdtg = ssi_create_peripheral(bus, TYPE_SPITZ_LCDTG);

    bus = qdev_get_child_bus(sms->mux, "ssi1");
    sms->ads7846 = ssi_create_peripheral(bus, "ads7846");
    qdev_connect_gpio_out(sms->ads7846, 0,
                          qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT));

    bus = qdev_get_child_bus(sms->mux, "ssi2");
    sms->max1111 = qdev_new(TYPE_MAX_1111);
    qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */,
                        SPITZ_BATTERY_VOLT);
    qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0);
    qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */,
                        SPITZ_CHARGEON_ACIN);
    ssi_realize_and_unref(sms->max1111, bus, &error_fatal);

    qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS,
                        qdev_get_gpio_in(sms->mux, 0));
    qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_ADS7846_CS,
                        qdev_get_gpio_in(sms->mux, 1));
    qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_MAX1111_CS,
                        qdev_get_gpio_in(sms->mux, 2));
}

/* CF Microdrive */

static void spitz_microdrive_attach(PXA2xxState *cpu, int slot)
{
    PCMCIACardState *md;
    DriveInfo *dinfo;

    dinfo = drive_get(IF_IDE, 0, 0);
    if (!dinfo || dinfo->media_cd)
        return;
    md = dscm1xxxx_init(dinfo);
    pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md);
}

/* Wm8750 and Max7310 on I2C */

#define AKITA_MAX_ADDR  0x18
#define SPITZ_WM_ADDRL  0x1b
#define SPITZ_WM_ADDRH  0x1a

#define SPITZ_GPIO_WM   5

static void spitz_wm8750_addr(void *opaque, int line, int level)
{
    I2CSlave *wm = (I2CSlave *) opaque;
    if (level)
        i2c_slave_set_address(wm, SPITZ_WM_ADDRH);
    else
        i2c_slave_set_address(wm, SPITZ_WM_ADDRL);
}

static void spitz_i2c_setup(MachineState *machine, PXA2xxState *cpu)
{
    /* Attach the CPU on one end of our I2C bus.  */
    I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);

    /* Attach a WM8750 to the bus */
    I2CSlave *i2c_dev = i2c_slave_new(TYPE_WM8750, 0);
    DeviceState *wm = DEVICE(i2c_dev);

    if (machine->audiodev) {
        qdev_prop_set_string(wm, "audiodev", machine->audiodev);
    }
    i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort);

    spitz_wm8750_addr(wm, 0, 0);
    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM,
                          qemu_allocate_irq(spitz_wm8750_addr, wm, 0));
    /* .. and to the sound interface.  */
    cpu->i2s->opaque = wm;
    cpu->i2s->codec_out = wm8750_dac_dat;
    cpu->i2s->codec_in = wm8750_adc_dat;
    wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
}

static void spitz_akita_i2c_setup(PXA2xxState *cpu)
{
    /* Attach a Max7310 to Akita I2C bus.  */
    i2c_slave_create_simple(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
                     AKITA_MAX_ADDR);
}

/* Other peripherals */

/*
 * Encapsulation of some miscellaneous GPIO line behaviour for the Spitz boards.
 *
 * QEMU interface:
 *  + named GPIO inputs "green-led", "orange-led", "charging", "discharging":
 *    these currently just print messages that the line has been signalled
 *  + named GPIO input "adc-temp-on": set to cause the battery-temperature
 *    value to be passed to the max111x ADC
 *  + named GPIO output "adc-temp": the ADC value, to be wired up to the max111x
 */
#define TYPE_SPITZ_MISC_GPIO "spitz-misc-gpio"
OBJECT_DECLARE_SIMPLE_TYPE(SpitzMiscGPIOState, SPITZ_MISC_GPIO)

struct SpitzMiscGPIOState {
    SysBusDevice parent_obj;

    qemu_irq adc_value;
};

static void spitz_misc_charging(void *opaque, int n, int level)
{
    zaurus_printf("Charging %s.\n", level ? "off" : "on");
}

static void spitz_misc_discharging(void *opaque, int n, int level)
{
    zaurus_printf("Discharging %s.\n", level ? "off" : "on");
}

static void spitz_misc_green_led(void *opaque, int n, int level)
{
    zaurus_printf("Green LED %s.\n", level ? "off" : "on");
}

static void spitz_misc_orange_led(void *opaque, int n, int level)
{
    zaurus_printf("Orange LED %s.\n", level ? "off" : "on");
}

static void spitz_misc_adc_temp(void *opaque, int n, int level)
{
    SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(opaque);
    int batt_temp = level ? SPITZ_BATTERY_TEMP : 0;

    qemu_set_irq(s->adc_value, batt_temp);
}

static void spitz_misc_gpio_init(Object *obj)
{
    SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(obj);
    DeviceState *dev = DEVICE(obj);

    qdev_init_gpio_in_named(dev, spitz_misc_charging, "charging", 1);
    qdev_init_gpio_in_named(dev, spitz_misc_discharging, "discharging", 1);
    qdev_init_gpio_in_named(dev, spitz_misc_green_led, "green-led", 1);
    qdev_init_gpio_in_named(dev, spitz_misc_orange_led, "orange-led", 1);
    qdev_init_gpio_in_named(dev, spitz_misc_adc_temp, "adc-temp-on", 1);

    qdev_init_gpio_out_named(dev, &s->adc_value, "adc-temp", 1);
}

#define SPITZ_SCP_LED_GREEN             1
#define SPITZ_SCP_JK_B                  2
#define SPITZ_SCP_CHRG_ON               3
#define SPITZ_SCP_MUTE_L                4
#define SPITZ_SCP_MUTE_R                5
#define SPITZ_SCP_CF_POWER              6
#define SPITZ_SCP_LED_ORANGE            7
#define SPITZ_SCP_JK_A                  8
#define SPITZ_SCP_ADC_TEMP_ON           9
#define SPITZ_SCP2_IR_ON                1
#define SPITZ_SCP2_AKIN_PULLUP          2
#define SPITZ_SCP2_BACKLIGHT_CONT       7
#define SPITZ_SCP2_BACKLIGHT_ON                 8
#define SPITZ_SCP2_MIC_BIAS             9

static void spitz_scoop_gpio_setup(SpitzMachineState *sms)
{
    DeviceState *miscdev = sysbus_create_simple(TYPE_SPITZ_MISC_GPIO, -1, NULL);

    sms->misc_gpio = miscdev;

    qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON,
                          qdev_get_gpio_in_named(miscdev, "charging", 0));
    qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B,
                          qdev_get_gpio_in_named(miscdev, "discharging", 0));
    qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN,
                          qdev_get_gpio_in_named(miscdev, "green-led", 0));
    qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE,
                          qdev_get_gpio_in_named(miscdev, "orange-led", 0));
    qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON,
                          qdev_get_gpio_in_named(miscdev, "adc-temp-on", 0));
    qdev_connect_gpio_out_named(miscdev, "adc-temp", 0,
                                qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP));

    if (sms->scp1) {
        qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT,
                              qdev_get_gpio_in_named(sms->lcdtg, "bl_bit5", 0));
        qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON,
                              qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0));
    }
}

#define SPITZ_GPIO_HSYNC                22
#define SPITZ_GPIO_SD_DETECT            9
#define SPITZ_GPIO_SD_WP                81
#define SPITZ_GPIO_ON_RESET             89
#define SPITZ_GPIO_BAT_COVER            90
#define SPITZ_GPIO_CF1_IRQ              105
#define SPITZ_GPIO_CF1_CD               94
#define SPITZ_GPIO_CF2_IRQ              106
#define SPITZ_GPIO_CF2_CD               93

static int spitz_hsync;

static void spitz_lcd_hsync_handler(void *opaque, int line, int level)
{
    PXA2xxState *cpu = (PXA2xxState *) opaque;
    qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync);
    spitz_hsync ^= 1;
}

static void spitz_reset(void *opaque, int line, int level)
{
    if (level) {
        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
    }
}

static void spitz_gpio_setup(PXA2xxState *cpu, int slots)
{
    qemu_irq lcd_hsync;
    qemu_irq reset;

    /*
     * Bad hack: We toggle the LCD hsync GPIO on every GPIO status
     * read to satisfy broken guests that poll-wait for hsync.
     * Simulating a real hsync event would be less practical and
     * wouldn't guarantee that a guest ever exits the loop.
     */
    spitz_hsync = 0;
    lcd_hsync = qemu_allocate_irq(spitz_lcd_hsync_handler, cpu, 0);
    pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync);
    pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync);

    /* MMC/SD host */
    pxa2xx_mmci_handlers(cpu->mmc,
                    qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP),
                    qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT));

    /* Battery lock always closed */
    qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER));

    /* Handle reset */
    reset = qemu_allocate_irq(spitz_reset, cpu, 0);
    qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, reset);

    /* PCMCIA signals: card's IRQ and Card-Detect */
    if (slots >= 1)
        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ),
                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD));
    if (slots >= 2)
        pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ),
                        qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD));
}

/* Board init.  */
#define SPITZ_RAM       0x04000000
#define SPITZ_ROM       0x00800000

static struct arm_boot_info spitz_binfo = {
    .loader_start = PXA2XX_SDRAM_BASE,
    .ram_size = 0x04000000,
};

static void spitz_common_init(MachineState *machine)
{
    SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine);
    SpitzMachineState *sms = SPITZ_MACHINE(machine);
    enum spitz_model_e model = smc->model;
    PXA2xxState *mpu;
    MemoryRegion *rom = g_new(MemoryRegion, 1);

    /* Setup CPU & memory */
    mpu = pxa270_init(spitz_binfo.ram_size, machine->cpu_type);
    sms->mpu = mpu;

    sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M);

    memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal);
    memory_region_add_subregion(get_system_memory(), 0, rom);

    /* Setup peripherals */
    spitz_keyboard_register(mpu);

    spitz_ssp_attach(sms);

    sms->scp0 = sysbus_create_simple("scoop", 0x10800000, NULL);
    if (model != akita) {
        sms->scp1 = sysbus_create_simple("scoop", 0x08800040, NULL);
    } else {
        sms->scp1 = NULL;
    }

    spitz_scoop_gpio_setup(sms);

    spitz_gpio_setup(mpu, (model == akita) ? 1 : 2);

    spitz_i2c_setup(machine, mpu);

    if (model == akita)
        spitz_akita_i2c_setup(mpu);

    if (model == terrier)
        /* A 6.0 GB microdrive is permanently sitting in CF slot 1.  */
        spitz_microdrive_attach(mpu, 1);
    else if (model != akita)
        /* A 4.0 GB microdrive is permanently sitting in CF slot 0.  */
        spitz_microdrive_attach(mpu, 0);

    spitz_binfo.board_id = smc->arm_id;
    arm_load_kernel(mpu->cpu, machine, &spitz_binfo);
    sl_bootparam_write(SL_PXA_PARAM_BASE);
}

static void spitz_common_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);

    mc->block_default_type = IF_IDE;
    mc->ignore_memory_transaction_failures = true;
    mc->init = spitz_common_init;
    mc->deprecation_reason = "machine is old and unmaintained";

    machine_add_audiodev_property(mc);
}

static const TypeInfo spitz_common_info = {
    .name = TYPE_SPITZ_MACHINE,
    .parent = TYPE_MACHINE,
    .abstract = true,
    .instance_size = sizeof(SpitzMachineState),
    .class_size = sizeof(SpitzMachineClass),
    .class_init = spitz_common_class_init,
};

static void akitapda_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc);

    mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)";
    mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0");
    smc->model = akita;
    smc->arm_id = 0x2e8;
}

static const TypeInfo akitapda_type = {
    .name = MACHINE_TYPE_NAME("akita"),
    .parent = TYPE_SPITZ_MACHINE,
    .class_init = akitapda_class_init,
};

static void spitzpda_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc);

    mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)";
    mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0");
    smc->model = spitz;
    smc->arm_id = 0x2c9;
}

static const TypeInfo spitzpda_type = {
    .name = MACHINE_TYPE_NAME("spitz"),
    .parent = TYPE_SPITZ_MACHINE,
    .class_init = spitzpda_class_init,
};

static void borzoipda_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc);

    mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)";
    mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0");
    smc->model = borzoi;
    smc->arm_id = 0x33f;
}

static const TypeInfo borzoipda_type = {
    .name = MACHINE_TYPE_NAME("borzoi"),
    .parent = TYPE_SPITZ_MACHINE,
    .class_init = borzoipda_class_init,
};

static void terrierpda_class_init(ObjectClass *oc, void *data)
{
    MachineClass *mc = MACHINE_CLASS(oc);
    SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc);

    mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)";
    mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5");
    smc->model = terrier;
    smc->arm_id = 0x33f;
}

static const TypeInfo terrierpda_type = {
    .name = MACHINE_TYPE_NAME("terrier"),
    .parent = TYPE_SPITZ_MACHINE,
    .class_init = terrierpda_class_init,
};

static void spitz_machine_init(void)
{
    type_register_static(&spitz_common_info);
    type_register_static(&akitapda_type);
    type_register_static(&spitzpda_type);
    type_register_static(&borzoipda_type);
    type_register_static(&terrierpda_type);
}

type_init(spitz_machine_init)

static bool is_version_0(void *opaque, int version_id)
{
    return version_id == 0;
}

static const VMStateDescription vmstate_sl_nand_info = {
    .name = "sl-nand",
    .version_id = 0,
    .minimum_version_id = 0,
    .fields = (const VMStateField[]) {
        VMSTATE_UINT8(ctl, SLNANDState),
        VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState),
        VMSTATE_END_OF_LIST(),
    },
};

static Property sl_nand_properties[] = {
    DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG),
    DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1),
    DEFINE_PROP_END_OF_LIST(),
};

static void sl_nand_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);

    dc->vmsd = &vmstate_sl_nand_info;
    device_class_set_props(dc, sl_nand_properties);
    dc->realize = sl_nand_realize;
    /* Reason: init() method uses drive_get() */
    dc->user_creatable = false;
}

static const TypeInfo sl_nand_info = {
    .name          = TYPE_SL_NAND,
    .parent        = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(SLNANDState),
    .instance_init = sl_nand_init,
    .class_init    = sl_nand_class_init,
};

static const VMStateDescription vmstate_spitz_kbd = {
    .name = "spitz-keyboard",
    .version_id = 1,
    .minimum_version_id = 0,
    .post_load = spitz_keyboard_post_load,
    .fields = (const VMStateField[]) {
        VMSTATE_UINT16(sense_state, SpitzKeyboardState),
        VMSTATE_UINT16(strobe_state, SpitzKeyboardState),
        VMSTATE_UNUSED_TEST(is_version_0, 5),
        VMSTATE_END_OF_LIST(),
    },
};

static void spitz_keyboard_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);

    dc->vmsd = &vmstate_spitz_kbd;
    dc->realize = spitz_keyboard_realize;
}

static const TypeInfo spitz_keyboard_info = {
    .name          = TYPE_SPITZ_KEYBOARD,
    .parent        = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(SpitzKeyboardState),
    .instance_init = spitz_keyboard_init,
    .class_init    = spitz_keyboard_class_init,
};

static const VMStateDescription vmstate_corgi_ssp_regs = {
    .name = "corgi-ssp",
    .version_id = 2,
    .minimum_version_id = 2,
    .fields = (const VMStateField[]) {
        VMSTATE_SSI_PERIPHERAL(ssidev, CorgiSSPState),
        VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3),
        VMSTATE_END_OF_LIST(),
    }
};

static void corgi_ssp_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);

    k->realize = corgi_ssp_realize;
    k->transfer = corgi_ssp_transfer;
    dc->vmsd = &vmstate_corgi_ssp_regs;
}

static const TypeInfo corgi_ssp_info = {
    .name          = TYPE_CORGI_SSP,
    .parent        = TYPE_SSI_PERIPHERAL,
    .instance_size = sizeof(CorgiSSPState),
    .class_init    = corgi_ssp_class_init,
};

static const VMStateDescription vmstate_spitz_lcdtg_regs = {
    .name = "spitz-lcdtg",
    .version_id = 1,
    .minimum_version_id = 1,
    .fields = (const VMStateField[]) {
        VMSTATE_SSI_PERIPHERAL(ssidev, SpitzLCDTG),
        VMSTATE_UINT32(bl_intensity, SpitzLCDTG),
        VMSTATE_UINT32(bl_power, SpitzLCDTG),
        VMSTATE_END_OF_LIST(),
    }
};

static void spitz_lcdtg_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);
    SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);

    k->realize = spitz_lcdtg_realize;
    k->transfer = spitz_lcdtg_transfer;
    dc->vmsd = &vmstate_spitz_lcdtg_regs;
}

static const TypeInfo spitz_lcdtg_info = {
    .name          = TYPE_SPITZ_LCDTG,
    .parent        = TYPE_SSI_PERIPHERAL,
    .instance_size = sizeof(SpitzLCDTG),
    .class_init    = spitz_lcdtg_class_init,
};

static const TypeInfo spitz_misc_gpio_info = {
    .name = TYPE_SPITZ_MISC_GPIO,
    .parent = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(SpitzMiscGPIOState),
    .instance_init = spitz_misc_gpio_init,
    /*
     * No class_init required: device has no internal state so does not
     * need to set up reset or vmstate, and does not have a realize method.
     */
};

static void spitz_register_types(void)
{
    type_register_static(&corgi_ssp_info);
    type_register_static(&spitz_lcdtg_info);
    type_register_static(&spitz_keyboard_info);
    type_register_static(&sl_nand_info);
    type_register_static(&spitz_misc_gpio_info);
}

type_init(spitz_register_types)