| /* |
| * Arm PrimeCell PL050 Keyboard / Mouse Interface |
| * |
| * Copyright (c) 2006-2007 CodeSourcery. |
| * Written by Paul Brook |
| * |
| * This code is licenced under the GPL. |
| */ |
| |
| #include "sysbus.h" |
| #include "ps2.h" |
| |
| typedef struct { |
| SysBusDevice busdev; |
| void *dev; |
| uint32_t cr; |
| uint32_t clk; |
| uint32_t last; |
| int pending; |
| qemu_irq irq; |
| int is_mouse; |
| } pl050_state; |
| |
| #define PL050_TXEMPTY (1 << 6) |
| #define PL050_TXBUSY (1 << 5) |
| #define PL050_RXFULL (1 << 4) |
| #define PL050_RXBUSY (1 << 3) |
| #define PL050_RXPARITY (1 << 2) |
| #define PL050_KMIC (1 << 1) |
| #define PL050_KMID (1 << 0) |
| |
| static const unsigned char pl050_id[] = |
| { 0x50, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; |
| |
| static void pl050_update(void *opaque, int level) |
| { |
| pl050_state *s = (pl050_state *)opaque; |
| int raise; |
| |
| s->pending = level; |
| raise = (s->pending && (s->cr & 0x10) != 0) |
| || (s->cr & 0x08) != 0; |
| qemu_set_irq(s->irq, raise); |
| } |
| |
| static uint32_t pl050_read(void *opaque, target_phys_addr_t offset) |
| { |
| pl050_state *s = (pl050_state *)opaque; |
| if (offset >= 0xfe0 && offset < 0x1000) |
| return pl050_id[(offset - 0xfe0) >> 2]; |
| |
| switch (offset >> 2) { |
| case 0: /* KMICR */ |
| return s->cr; |
| case 1: /* KMISTAT */ |
| { |
| uint8_t val; |
| uint32_t stat; |
| |
| val = s->last; |
| val = val ^ (val >> 4); |
| val = val ^ (val >> 2); |
| val = (val ^ (val >> 1)) & 1; |
| |
| stat = PL050_TXEMPTY; |
| if (val) |
| stat |= PL050_RXPARITY; |
| if (s->pending) |
| stat |= PL050_RXFULL; |
| |
| return stat; |
| } |
| case 2: /* KMIDATA */ |
| if (s->pending) |
| s->last = ps2_read_data(s->dev); |
| return s->last; |
| case 3: /* KMICLKDIV */ |
| return s->clk; |
| case 4: /* KMIIR */ |
| return s->pending | 2; |
| default: |
| hw_error("pl050_read: Bad offset %x\n", (int)offset); |
| return 0; |
| } |
| } |
| |
| static void pl050_write(void *opaque, target_phys_addr_t offset, |
| uint32_t value) |
| { |
| pl050_state *s = (pl050_state *)opaque; |
| switch (offset >> 2) { |
| case 0: /* KMICR */ |
| s->cr = value; |
| pl050_update(s, s->pending); |
| /* ??? Need to implement the enable/disable bit. */ |
| break; |
| case 2: /* KMIDATA */ |
| /* ??? This should toggle the TX interrupt line. */ |
| /* ??? This means kbd/mouse can block each other. */ |
| if (s->is_mouse) { |
| ps2_write_mouse(s->dev, value); |
| } else { |
| ps2_write_keyboard(s->dev, value); |
| } |
| break; |
| case 3: /* KMICLKDIV */ |
| s->clk = value; |
| return; |
| default: |
| hw_error("pl050_write: Bad offset %x\n", (int)offset); |
| } |
| } |
| static CPUReadMemoryFunc * const pl050_readfn[] = { |
| pl050_read, |
| pl050_read, |
| pl050_read |
| }; |
| |
| static CPUWriteMemoryFunc * const pl050_writefn[] = { |
| pl050_write, |
| pl050_write, |
| pl050_write |
| }; |
| |
| static int pl050_init(SysBusDevice *dev, int is_mouse) |
| { |
| pl050_state *s = FROM_SYSBUS(pl050_state, dev); |
| int iomemtype; |
| |
| iomemtype = cpu_register_io_memory(pl050_readfn, |
| pl050_writefn, s, |
| DEVICE_NATIVE_ENDIAN); |
| sysbus_init_mmio(dev, 0x1000, iomemtype); |
| sysbus_init_irq(dev, &s->irq); |
| s->is_mouse = is_mouse; |
| if (s->is_mouse) |
| s->dev = ps2_mouse_init(pl050_update, s); |
| else |
| s->dev = ps2_kbd_init(pl050_update, s); |
| /* ??? Save/restore. */ |
| return 0; |
| } |
| |
| static int pl050_init_keyboard(SysBusDevice *dev) |
| { |
| return pl050_init(dev, 0); |
| } |
| |
| static int pl050_init_mouse(SysBusDevice *dev) |
| { |
| return pl050_init(dev, 1); |
| } |
| |
| static void pl050_register_devices(void) |
| { |
| sysbus_register_dev("pl050_keyboard", sizeof(pl050_state), |
| pl050_init_keyboard); |
| sysbus_register_dev("pl050_mouse", sizeof(pl050_state), |
| pl050_init_mouse); |
| } |
| |
| device_init(pl050_register_devices) |