| /* |
| * PowerMac descriptor-based DMA emulation |
| * |
| * Copyright (c) 2005-2007 Fabrice Bellard |
| * Copyright (c) 2007 Jocelyn Mayer |
| * Copyright (c) 2009 Laurent Vivier |
| * |
| * some parts from linux-2.6.28, arch/powerpc/include/asm/dbdma.h |
| * |
| * Definitions for using the Apple Descriptor-Based DMA controller |
| * in Power Macintosh computers. |
| * |
| * Copyright (C) 1996 Paul Mackerras. |
| * |
| * some parts from mol 0.9.71 |
| * |
| * Descriptor based DMA emulation |
| * |
| * Copyright (C) 1998-2004 Samuel Rydh (samuel@ibrium.se) |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "hw.h" |
| #include "isa.h" |
| #include "mac_dbdma.h" |
| |
| /* debug DBDMA */ |
| //#define DEBUG_DBDMA |
| |
| #ifdef DEBUG_DBDMA |
| #define DBDMA_DPRINTF(fmt, ...) \ |
| do { printf("DBDMA: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DBDMA_DPRINTF(fmt, ...) |
| #endif |
| |
| /* |
| */ |
| |
| /* |
| * DBDMA control/status registers. All little-endian. |
| */ |
| |
| #define DBDMA_CONTROL 0x00 |
| #define DBDMA_STATUS 0x01 |
| #define DBDMA_CMDPTR_HI 0x02 |
| #define DBDMA_CMDPTR_LO 0x03 |
| #define DBDMA_INTR_SEL 0x04 |
| #define DBDMA_BRANCH_SEL 0x05 |
| #define DBDMA_WAIT_SEL 0x06 |
| #define DBDMA_XFER_MODE 0x07 |
| #define DBDMA_DATA2PTR_HI 0x08 |
| #define DBDMA_DATA2PTR_LO 0x09 |
| #define DBDMA_RES1 0x0A |
| #define DBDMA_ADDRESS_HI 0x0B |
| #define DBDMA_BRANCH_ADDR_HI 0x0C |
| #define DBDMA_RES2 0x0D |
| #define DBDMA_RES3 0x0E |
| #define DBDMA_RES4 0x0F |
| |
| #define DBDMA_REGS 16 |
| #define DBDMA_SIZE (DBDMA_REGS * sizeof(uint32_t)) |
| |
| #define DBDMA_CHANNEL_SHIFT 7 |
| #define DBDMA_CHANNEL_SIZE (1 << DBDMA_CHANNEL_SHIFT) |
| |
| #define DBDMA_CHANNELS (0x1000 >> DBDMA_CHANNEL_SHIFT) |
| |
| /* Bits in control and status registers */ |
| |
| #define RUN 0x8000 |
| #define PAUSE 0x4000 |
| #define FLUSH 0x2000 |
| #define WAKE 0x1000 |
| #define DEAD 0x0800 |
| #define ACTIVE 0x0400 |
| #define BT 0x0100 |
| #define DEVSTAT 0x00ff |
| |
| /* |
| * DBDMA command structure. These fields are all little-endian! |
| */ |
| |
| typedef struct dbdma_cmd { |
| uint16_t req_count; /* requested byte transfer count */ |
| uint16_t command; /* command word (has bit-fields) */ |
| uint32_t phy_addr; /* physical data address */ |
| uint32_t cmd_dep; /* command-dependent field */ |
| uint16_t res_count; /* residual count after completion */ |
| uint16_t xfer_status; /* transfer status */ |
| } dbdma_cmd; |
| |
| /* DBDMA command values in command field */ |
| |
| #define COMMAND_MASK 0xf000 |
| #define OUTPUT_MORE 0x0000 /* transfer memory data to stream */ |
| #define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ |
| #define INPUT_MORE 0x2000 /* transfer stream data to memory */ |
| #define INPUT_LAST 0x3000 /* ditto, expect end marker */ |
| #define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ |
| #define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ |
| #define DBDMA_NOP 0x6000 /* do nothing */ |
| #define DBDMA_STOP 0x7000 /* suspend processing */ |
| |
| /* Key values in command field */ |
| |
| #define KEY_MASK 0x0700 |
| #define KEY_STREAM0 0x0000 /* usual data stream */ |
| #define KEY_STREAM1 0x0100 /* control/status stream */ |
| #define KEY_STREAM2 0x0200 /* device-dependent stream */ |
| #define KEY_STREAM3 0x0300 /* device-dependent stream */ |
| #define KEY_STREAM4 0x0400 /* reserved */ |
| #define KEY_REGS 0x0500 /* device register space */ |
| #define KEY_SYSTEM 0x0600 /* system memory-mapped space */ |
| #define KEY_DEVICE 0x0700 /* device memory-mapped space */ |
| |
| /* Interrupt control values in command field */ |
| |
| #define INTR_MASK 0x0030 |
| #define INTR_NEVER 0x0000 /* don't interrupt */ |
| #define INTR_IFSET 0x0010 /* intr if condition bit is 1 */ |
| #define INTR_IFCLR 0x0020 /* intr if condition bit is 0 */ |
| #define INTR_ALWAYS 0x0030 /* always interrupt */ |
| |
| /* Branch control values in command field */ |
| |
| #define BR_MASK 0x000c |
| #define BR_NEVER 0x0000 /* don't branch */ |
| #define BR_IFSET 0x0004 /* branch if condition bit is 1 */ |
| #define BR_IFCLR 0x0008 /* branch if condition bit is 0 */ |
| #define BR_ALWAYS 0x000c /* always branch */ |
| |
| /* Wait control values in command field */ |
| |
| #define WAIT_MASK 0x0003 |
| #define WAIT_NEVER 0x0000 /* don't wait */ |
| #define WAIT_IFSET 0x0001 /* wait if condition bit is 1 */ |
| #define WAIT_IFCLR 0x0002 /* wait if condition bit is 0 */ |
| #define WAIT_ALWAYS 0x0003 /* always wait */ |
| |
| typedef struct DBDMA_channel { |
| int channel; |
| uint32_t regs[DBDMA_REGS]; |
| qemu_irq irq; |
| DBDMA_io io; |
| DBDMA_rw rw; |
| DBDMA_flush flush; |
| dbdma_cmd current; |
| int processing; |
| } DBDMA_channel; |
| |
| #ifdef DEBUG_DBDMA |
| static void dump_dbdma_cmd(dbdma_cmd *cmd) |
| { |
| printf("dbdma_cmd %p\n", cmd); |
| printf(" req_count 0x%04x\n", le16_to_cpu(cmd->req_count)); |
| printf(" command 0x%04x\n", le16_to_cpu(cmd->command)); |
| printf(" phy_addr 0x%08x\n", le32_to_cpu(cmd->phy_addr)); |
| printf(" cmd_dep 0x%08x\n", le32_to_cpu(cmd->cmd_dep)); |
| printf(" res_count 0x%04x\n", le16_to_cpu(cmd->res_count)); |
| printf(" xfer_status 0x%04x\n", le16_to_cpu(cmd->xfer_status)); |
| } |
| #else |
| static void dump_dbdma_cmd(dbdma_cmd *cmd) |
| { |
| } |
| #endif |
| static void dbdma_cmdptr_load(DBDMA_channel *ch) |
| { |
| DBDMA_DPRINTF("dbdma_cmdptr_load 0x%08x\n", |
| ch->regs[DBDMA_CMDPTR_LO]); |
| cpu_physical_memory_read(ch->regs[DBDMA_CMDPTR_LO], |
| (uint8_t*)&ch->current, sizeof(dbdma_cmd)); |
| } |
| |
| static void dbdma_cmdptr_save(DBDMA_channel *ch) |
| { |
| DBDMA_DPRINTF("dbdma_cmdptr_save 0x%08x\n", |
| ch->regs[DBDMA_CMDPTR_LO]); |
| DBDMA_DPRINTF("xfer_status 0x%08x res_count 0x%04x\n", |
| le16_to_cpu(ch->current.xfer_status), |
| le16_to_cpu(ch->current.res_count)); |
| cpu_physical_memory_write(ch->regs[DBDMA_CMDPTR_LO], |
| (uint8_t*)&ch->current, sizeof(dbdma_cmd)); |
| } |
| |
| static void kill_channel(DBDMA_channel *ch) |
| { |
| DBDMA_DPRINTF("kill_channel\n"); |
| |
| ch->regs[DBDMA_STATUS] |= DEAD; |
| ch->regs[DBDMA_STATUS] &= ~ACTIVE; |
| |
| qemu_irq_raise(ch->irq); |
| } |
| |
| static void conditional_interrupt(DBDMA_channel *ch) |
| { |
| dbdma_cmd *current = &ch->current; |
| uint16_t intr; |
| uint16_t sel_mask, sel_value; |
| uint32_t status; |
| int cond; |
| |
| DBDMA_DPRINTF("conditional_interrupt\n"); |
| |
| intr = le16_to_cpu(current->command) & INTR_MASK; |
| |
| switch(intr) { |
| case INTR_NEVER: /* don't interrupt */ |
| return; |
| case INTR_ALWAYS: /* always interrupt */ |
| qemu_irq_raise(ch->irq); |
| return; |
| } |
| |
| status = ch->regs[DBDMA_STATUS] & DEVSTAT; |
| |
| sel_mask = (ch->regs[DBDMA_INTR_SEL] >> 16) & 0x0f; |
| sel_value = ch->regs[DBDMA_INTR_SEL] & 0x0f; |
| |
| cond = (status & sel_mask) == (sel_value & sel_mask); |
| |
| switch(intr) { |
| case INTR_IFSET: /* intr if condition bit is 1 */ |
| if (cond) |
| qemu_irq_raise(ch->irq); |
| return; |
| case INTR_IFCLR: /* intr if condition bit is 0 */ |
| if (!cond) |
| qemu_irq_raise(ch->irq); |
| return; |
| } |
| } |
| |
| static int conditional_wait(DBDMA_channel *ch) |
| { |
| dbdma_cmd *current = &ch->current; |
| uint16_t wait; |
| uint16_t sel_mask, sel_value; |
| uint32_t status; |
| int cond; |
| |
| DBDMA_DPRINTF("conditional_wait\n"); |
| |
| wait = le16_to_cpu(current->command) & WAIT_MASK; |
| |
| switch(wait) { |
| case WAIT_NEVER: /* don't wait */ |
| return 0; |
| case WAIT_ALWAYS: /* always wait */ |
| return 1; |
| } |
| |
| status = ch->regs[DBDMA_STATUS] & DEVSTAT; |
| |
| sel_mask = (ch->regs[DBDMA_WAIT_SEL] >> 16) & 0x0f; |
| sel_value = ch->regs[DBDMA_WAIT_SEL] & 0x0f; |
| |
| cond = (status & sel_mask) == (sel_value & sel_mask); |
| |
| switch(wait) { |
| case WAIT_IFSET: /* wait if condition bit is 1 */ |
| if (cond) |
| return 1; |
| return 0; |
| case WAIT_IFCLR: /* wait if condition bit is 0 */ |
| if (!cond) |
| return 1; |
| return 0; |
| } |
| return 0; |
| } |
| |
| static void next(DBDMA_channel *ch) |
| { |
| uint32_t cp; |
| |
| ch->regs[DBDMA_STATUS] &= ~BT; |
| |
| cp = ch->regs[DBDMA_CMDPTR_LO]; |
| ch->regs[DBDMA_CMDPTR_LO] = cp + sizeof(dbdma_cmd); |
| dbdma_cmdptr_load(ch); |
| } |
| |
| static void branch(DBDMA_channel *ch) |
| { |
| dbdma_cmd *current = &ch->current; |
| |
| ch->regs[DBDMA_CMDPTR_LO] = current->cmd_dep; |
| ch->regs[DBDMA_STATUS] |= BT; |
| dbdma_cmdptr_load(ch); |
| } |
| |
| static void conditional_branch(DBDMA_channel *ch) |
| { |
| dbdma_cmd *current = &ch->current; |
| uint16_t br; |
| uint16_t sel_mask, sel_value; |
| uint32_t status; |
| int cond; |
| |
| DBDMA_DPRINTF("conditional_branch\n"); |
| |
| /* check if we must branch */ |
| |
| br = le16_to_cpu(current->command) & BR_MASK; |
| |
| switch(br) { |
| case BR_NEVER: /* don't branch */ |
| next(ch); |
| return; |
| case BR_ALWAYS: /* always branch */ |
| branch(ch); |
| return; |
| } |
| |
| status = ch->regs[DBDMA_STATUS] & DEVSTAT; |
| |
| sel_mask = (ch->regs[DBDMA_BRANCH_SEL] >> 16) & 0x0f; |
| sel_value = ch->regs[DBDMA_BRANCH_SEL] & 0x0f; |
| |
| cond = (status & sel_mask) == (sel_value & sel_mask); |
| |
| switch(br) { |
| case BR_IFSET: /* branch if condition bit is 1 */ |
| if (cond) |
| branch(ch); |
| else |
| next(ch); |
| return; |
| case BR_IFCLR: /* branch if condition bit is 0 */ |
| if (!cond) |
| branch(ch); |
| else |
| next(ch); |
| return; |
| } |
| } |
| |
| static QEMUBH *dbdma_bh; |
| static void channel_run(DBDMA_channel *ch); |
| |
| static void dbdma_end(DBDMA_io *io) |
| { |
| DBDMA_channel *ch = io->channel; |
| dbdma_cmd *current = &ch->current; |
| |
| if (conditional_wait(ch)) |
| goto wait; |
| |
| current->xfer_status = cpu_to_le16(ch->regs[DBDMA_STATUS]); |
| current->res_count = cpu_to_le16(io->len); |
| dbdma_cmdptr_save(ch); |
| if (io->is_last) |
| ch->regs[DBDMA_STATUS] &= ~FLUSH; |
| |
| conditional_interrupt(ch); |
| conditional_branch(ch); |
| |
| wait: |
| ch->processing = 0; |
| if ((ch->regs[DBDMA_STATUS] & RUN) && |
| (ch->regs[DBDMA_STATUS] & ACTIVE)) |
| channel_run(ch); |
| } |
| |
| static void start_output(DBDMA_channel *ch, int key, uint32_t addr, |
| uint16_t req_count, int is_last) |
| { |
| DBDMA_DPRINTF("start_output\n"); |
| |
| /* KEY_REGS, KEY_DEVICE and KEY_STREAM |
| * are not implemented in the mac-io chip |
| */ |
| |
| DBDMA_DPRINTF("addr 0x%x key 0x%x\n", addr, key); |
| if (!addr || key > KEY_STREAM3) { |
| kill_channel(ch); |
| return; |
| } |
| |
| ch->io.addr = addr; |
| ch->io.len = req_count; |
| ch->io.is_last = is_last; |
| ch->io.dma_end = dbdma_end; |
| ch->io.is_dma_out = 1; |
| ch->processing = 1; |
| if (ch->rw) { |
| ch->rw(&ch->io); |
| } |
| } |
| |
| static void start_input(DBDMA_channel *ch, int key, uint32_t addr, |
| uint16_t req_count, int is_last) |
| { |
| DBDMA_DPRINTF("start_input\n"); |
| |
| /* KEY_REGS, KEY_DEVICE and KEY_STREAM |
| * are not implemented in the mac-io chip |
| */ |
| |
| if (!addr || key > KEY_STREAM3) { |
| kill_channel(ch); |
| return; |
| } |
| |
| ch->io.addr = addr; |
| ch->io.len = req_count; |
| ch->io.is_last = is_last; |
| ch->io.dma_end = dbdma_end; |
| ch->io.is_dma_out = 0; |
| ch->processing = 1; |
| if (ch->rw) { |
| ch->rw(&ch->io); |
| } |
| } |
| |
| static void load_word(DBDMA_channel *ch, int key, uint32_t addr, |
| uint16_t len) |
| { |
| dbdma_cmd *current = &ch->current; |
| uint32_t val; |
| |
| DBDMA_DPRINTF("load_word\n"); |
| |
| /* only implements KEY_SYSTEM */ |
| |
| if (key != KEY_SYSTEM) { |
| printf("DBDMA: LOAD_WORD, unimplemented key %x\n", key); |
| kill_channel(ch); |
| return; |
| } |
| |
| cpu_physical_memory_read(addr, (uint8_t*)&val, len); |
| |
| if (len == 2) |
| val = (val << 16) | (current->cmd_dep & 0x0000ffff); |
| else if (len == 1) |
| val = (val << 24) | (current->cmd_dep & 0x00ffffff); |
| |
| current->cmd_dep = val; |
| |
| if (conditional_wait(ch)) |
| goto wait; |
| |
| current->xfer_status = cpu_to_le16(ch->regs[DBDMA_STATUS]); |
| dbdma_cmdptr_save(ch); |
| ch->regs[DBDMA_STATUS] &= ~FLUSH; |
| |
| conditional_interrupt(ch); |
| next(ch); |
| |
| wait: |
| qemu_bh_schedule(dbdma_bh); |
| } |
| |
| static void store_word(DBDMA_channel *ch, int key, uint32_t addr, |
| uint16_t len) |
| { |
| dbdma_cmd *current = &ch->current; |
| uint32_t val; |
| |
| DBDMA_DPRINTF("store_word\n"); |
| |
| /* only implements KEY_SYSTEM */ |
| |
| if (key != KEY_SYSTEM) { |
| printf("DBDMA: STORE_WORD, unimplemented key %x\n", key); |
| kill_channel(ch); |
| return; |
| } |
| |
| val = current->cmd_dep; |
| if (len == 2) |
| val >>= 16; |
| else if (len == 1) |
| val >>= 24; |
| |
| cpu_physical_memory_write(addr, (uint8_t*)&val, len); |
| |
| if (conditional_wait(ch)) |
| goto wait; |
| |
| current->xfer_status = cpu_to_le16(ch->regs[DBDMA_STATUS]); |
| dbdma_cmdptr_save(ch); |
| ch->regs[DBDMA_STATUS] &= ~FLUSH; |
| |
| conditional_interrupt(ch); |
| next(ch); |
| |
| wait: |
| qemu_bh_schedule(dbdma_bh); |
| } |
| |
| static void nop(DBDMA_channel *ch) |
| { |
| dbdma_cmd *current = &ch->current; |
| |
| if (conditional_wait(ch)) |
| goto wait; |
| |
| current->xfer_status = cpu_to_le16(ch->regs[DBDMA_STATUS]); |
| dbdma_cmdptr_save(ch); |
| |
| conditional_interrupt(ch); |
| conditional_branch(ch); |
| |
| wait: |
| qemu_bh_schedule(dbdma_bh); |
| } |
| |
| static void stop(DBDMA_channel *ch) |
| { |
| ch->regs[DBDMA_STATUS] &= ~(ACTIVE|DEAD|FLUSH); |
| |
| /* the stop command does not increment command pointer */ |
| } |
| |
| static void channel_run(DBDMA_channel *ch) |
| { |
| dbdma_cmd *current = &ch->current; |
| uint16_t cmd, key; |
| uint16_t req_count; |
| uint32_t phy_addr; |
| |
| DBDMA_DPRINTF("channel_run\n"); |
| dump_dbdma_cmd(current); |
| |
| /* clear WAKE flag at command fetch */ |
| |
| ch->regs[DBDMA_STATUS] &= ~WAKE; |
| |
| cmd = le16_to_cpu(current->command) & COMMAND_MASK; |
| |
| switch (cmd) { |
| case DBDMA_NOP: |
| nop(ch); |
| return; |
| |
| case DBDMA_STOP: |
| stop(ch); |
| return; |
| } |
| |
| key = le16_to_cpu(current->command) & 0x0700; |
| req_count = le16_to_cpu(current->req_count); |
| phy_addr = le32_to_cpu(current->phy_addr); |
| |
| if (key == KEY_STREAM4) { |
| printf("command %x, invalid key 4\n", cmd); |
| kill_channel(ch); |
| return; |
| } |
| |
| switch (cmd) { |
| case OUTPUT_MORE: |
| start_output(ch, key, phy_addr, req_count, 0); |
| return; |
| |
| case OUTPUT_LAST: |
| start_output(ch, key, phy_addr, req_count, 1); |
| return; |
| |
| case INPUT_MORE: |
| start_input(ch, key, phy_addr, req_count, 0); |
| return; |
| |
| case INPUT_LAST: |
| start_input(ch, key, phy_addr, req_count, 1); |
| return; |
| } |
| |
| if (key < KEY_REGS) { |
| printf("command %x, invalid key %x\n", cmd, key); |
| key = KEY_SYSTEM; |
| } |
| |
| /* for LOAD_WORD and STORE_WORD, req_count is on 3 bits |
| * and BRANCH is invalid |
| */ |
| |
| req_count = req_count & 0x0007; |
| if (req_count & 0x4) { |
| req_count = 4; |
| phy_addr &= ~3; |
| } else if (req_count & 0x2) { |
| req_count = 2; |
| phy_addr &= ~1; |
| } else |
| req_count = 1; |
| |
| switch (cmd) { |
| case LOAD_WORD: |
| load_word(ch, key, phy_addr, req_count); |
| return; |
| |
| case STORE_WORD: |
| store_word(ch, key, phy_addr, req_count); |
| return; |
| } |
| } |
| |
| static void DBDMA_run (DBDMA_channel *ch) |
| { |
| int channel; |
| |
| for (channel = 0; channel < DBDMA_CHANNELS; channel++, ch++) { |
| uint32_t status = ch->regs[DBDMA_STATUS]; |
| if (!ch->processing && (status & RUN) && (status & ACTIVE)) |
| channel_run(ch); |
| } |
| } |
| |
| static void DBDMA_run_bh(void *opaque) |
| { |
| DBDMA_channel *ch = opaque; |
| |
| DBDMA_DPRINTF("DBDMA_run_bh\n"); |
| |
| DBDMA_run(ch); |
| } |
| |
| void DBDMA_register_channel(void *dbdma, int nchan, qemu_irq irq, |
| DBDMA_rw rw, DBDMA_flush flush, |
| void *opaque) |
| { |
| DBDMA_channel *ch = ( DBDMA_channel *)dbdma + nchan; |
| |
| DBDMA_DPRINTF("DBDMA_register_channel 0x%x\n", nchan); |
| |
| ch->irq = irq; |
| ch->channel = nchan; |
| ch->rw = rw; |
| ch->flush = flush; |
| ch->io.opaque = opaque; |
| ch->io.channel = ch; |
| } |
| |
| void DBDMA_schedule(void) |
| { |
| qemu_notify_event(); |
| } |
| |
| static void |
| dbdma_control_write(DBDMA_channel *ch) |
| { |
| uint16_t mask, value; |
| uint32_t status; |
| |
| mask = (ch->regs[DBDMA_CONTROL] >> 16) & 0xffff; |
| value = ch->regs[DBDMA_CONTROL] & 0xffff; |
| |
| value &= (RUN | PAUSE | FLUSH | WAKE | DEVSTAT); |
| |
| status = ch->regs[DBDMA_STATUS]; |
| |
| status = (value & mask) | (status & ~mask); |
| |
| if (status & WAKE) |
| status |= ACTIVE; |
| if (status & RUN) { |
| status |= ACTIVE; |
| status &= ~DEAD; |
| } |
| if (status & PAUSE) |
| status &= ~ACTIVE; |
| if ((ch->regs[DBDMA_STATUS] & RUN) && !(status & RUN)) { |
| /* RUN is cleared */ |
| status &= ~(ACTIVE|DEAD); |
| } |
| |
| DBDMA_DPRINTF(" status 0x%08x\n", status); |
| |
| ch->regs[DBDMA_STATUS] = status; |
| |
| if (status & ACTIVE) |
| qemu_bh_schedule(dbdma_bh); |
| if ((status & FLUSH) && ch->flush) |
| ch->flush(&ch->io); |
| } |
| |
| static void dbdma_writel (void *opaque, |
| target_phys_addr_t addr, uint32_t value) |
| { |
| int channel = addr >> DBDMA_CHANNEL_SHIFT; |
| DBDMA_channel *ch = (DBDMA_channel *)opaque + channel; |
| int reg = (addr - (channel << DBDMA_CHANNEL_SHIFT)) >> 2; |
| |
| DBDMA_DPRINTF("writel 0x" TARGET_FMT_plx " <= 0x%08x\n", addr, value); |
| DBDMA_DPRINTF("channel 0x%x reg 0x%x\n", |
| (uint32_t)addr >> DBDMA_CHANNEL_SHIFT, reg); |
| |
| value = bswap32(value); |
| |
| /* cmdptr cannot be modified if channel is RUN or ACTIVE */ |
| |
| if (reg == DBDMA_CMDPTR_LO && |
| (ch->regs[DBDMA_STATUS] & (RUN | ACTIVE))) |
| return; |
| |
| ch->regs[reg] = value; |
| |
| switch(reg) { |
| case DBDMA_CONTROL: |
| dbdma_control_write(ch); |
| break; |
| case DBDMA_CMDPTR_LO: |
| /* 16-byte aligned */ |
| ch->regs[DBDMA_CMDPTR_LO] &= ~0xf; |
| dbdma_cmdptr_load(ch); |
| break; |
| case DBDMA_STATUS: |
| case DBDMA_INTR_SEL: |
| case DBDMA_BRANCH_SEL: |
| case DBDMA_WAIT_SEL: |
| /* nothing to do */ |
| break; |
| case DBDMA_XFER_MODE: |
| case DBDMA_CMDPTR_HI: |
| case DBDMA_DATA2PTR_HI: |
| case DBDMA_DATA2PTR_LO: |
| case DBDMA_ADDRESS_HI: |
| case DBDMA_BRANCH_ADDR_HI: |
| case DBDMA_RES1: |
| case DBDMA_RES2: |
| case DBDMA_RES3: |
| case DBDMA_RES4: |
| /* unused */ |
| break; |
| } |
| } |
| |
| static uint32_t dbdma_readl (void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t value; |
| int channel = addr >> DBDMA_CHANNEL_SHIFT; |
| DBDMA_channel *ch = (DBDMA_channel *)opaque + channel; |
| int reg = (addr - (channel << DBDMA_CHANNEL_SHIFT)) >> 2; |
| |
| value = ch->regs[reg]; |
| |
| DBDMA_DPRINTF("readl 0x" TARGET_FMT_plx " => 0x%08x\n", addr, value); |
| DBDMA_DPRINTF("channel 0x%x reg 0x%x\n", |
| (uint32_t)addr >> DBDMA_CHANNEL_SHIFT, reg); |
| |
| switch(reg) { |
| case DBDMA_CONTROL: |
| value = 0; |
| break; |
| case DBDMA_STATUS: |
| case DBDMA_CMDPTR_LO: |
| case DBDMA_INTR_SEL: |
| case DBDMA_BRANCH_SEL: |
| case DBDMA_WAIT_SEL: |
| /* nothing to do */ |
| break; |
| case DBDMA_XFER_MODE: |
| case DBDMA_CMDPTR_HI: |
| case DBDMA_DATA2PTR_HI: |
| case DBDMA_DATA2PTR_LO: |
| case DBDMA_ADDRESS_HI: |
| case DBDMA_BRANCH_ADDR_HI: |
| /* unused */ |
| value = 0; |
| break; |
| case DBDMA_RES1: |
| case DBDMA_RES2: |
| case DBDMA_RES3: |
| case DBDMA_RES4: |
| /* reserved */ |
| break; |
| } |
| |
| value = bswap32(value); |
| return value; |
| } |
| |
| static CPUWriteMemoryFunc * const dbdma_write[] = { |
| NULL, |
| NULL, |
| dbdma_writel, |
| }; |
| |
| static CPUReadMemoryFunc * const dbdma_read[] = { |
| NULL, |
| NULL, |
| dbdma_readl, |
| }; |
| |
| static void dbdma_save(QEMUFile *f, void *opaque) |
| { |
| DBDMA_channel *s = opaque; |
| unsigned int i, j; |
| |
| for (i = 0; i < DBDMA_CHANNELS; i++) |
| for (j = 0; j < DBDMA_REGS; j++) |
| qemu_put_be32s(f, &s[i].regs[j]); |
| } |
| |
| static int dbdma_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| DBDMA_channel *s = opaque; |
| unsigned int i, j; |
| |
| if (version_id != 2) |
| return -EINVAL; |
| |
| for (i = 0; i < DBDMA_CHANNELS; i++) |
| for (j = 0; j < DBDMA_REGS; j++) |
| qemu_get_be32s(f, &s[i].regs[j]); |
| |
| return 0; |
| } |
| |
| static void dbdma_reset(void *opaque) |
| { |
| DBDMA_channel *s = opaque; |
| int i; |
| |
| for (i = 0; i < DBDMA_CHANNELS; i++) |
| memset(s[i].regs, 0, DBDMA_SIZE); |
| } |
| |
| void* DBDMA_init (int *dbdma_mem_index) |
| { |
| DBDMA_channel *s; |
| |
| s = qemu_mallocz(sizeof(DBDMA_channel) * DBDMA_CHANNELS); |
| |
| *dbdma_mem_index = cpu_register_io_memory(dbdma_read, dbdma_write, s, |
| DEVICE_NATIVE_ENDIAN); |
| register_savevm(NULL, "dbdma", -1, 1, dbdma_save, dbdma_load, s); |
| qemu_register_reset(dbdma_reset, s); |
| |
| dbdma_bh = qemu_bh_new(DBDMA_run_bh, s); |
| |
| return s; |
| } |