hw/nvme: Implement the Function Level Reset
This patch implements the Function Level Reset, a feature currently not
implemented for the Nvme device, while listed as a mandatory ("shall")
in the 1.4 spec.
The implementation reuses FLR-related building blocks defined for the
pci-bridge module, and follows the same logic:
- FLR capability is advertised in the PCIE config,
- custom pci_write_config callback detects a write to the trigger
register and performs the PCI reset,
- which, eventually, calls the custom dc->reset handler.
Depending on reset type, parts of the state should (or should not) be
cleared. To distinguish the type of reset, an additional parameter is
passed to the reset function.
This patch also enables advertisement of the Power Management PCI
capability. The main reason behind it is to announce the no_soft_reset=1
bit, to signal SR-IOV support where each VF can be reset individually.
The implementation purposedly ignores writes to the PMCS.PS register,
as even such naïve behavior is enough to correctly handle the D3->D0
transition.
It’s worth to note, that the power state transition back to to D3, with
all the corresponding side effects, wasn't and stil isn't handled
properly.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
diff --git a/hw/nvme/trace-events b/hw/nvme/trace-events
index 889bbb3..b07864c 100644
--- a/hw/nvme/trace-events
+++ b/hw/nvme/trace-events
@@ -110,6 +110,7 @@
pci_nvme_clear_ns_close(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Closed state"
pci_nvme_clear_ns_reset(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Empty state"
pci_nvme_zoned_zrwa_implicit_flush(uint64_t zslba, uint32_t nlb) "zslba 0x%"PRIx64" nlb %"PRIu32""
+pci_nvme_pci_reset(void) "PCI Function Level Reset"
# error conditions
pci_nvme_err_mdts(size_t len) "len %zu"
