| /* |
| * QEMU PowerPC E500 embedded processors pci controller emulation |
| * |
| * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Author: Yu Liu, <yu.liu@freescale.com> |
| * |
| * This file is derived from hw/ppc4xx_pci.c, |
| * the copyright for that material belongs to the original owners. |
| * |
| * This is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "hw.h" |
| #include "ppce500.h" |
| #include "pci.h" |
| #include "pci_host.h" |
| #include "bswap.h" |
| |
| #ifdef DEBUG_PCI |
| #define pci_debug(fmt, ...) fprintf(stderr, fmt, ## __VA_ARGS__) |
| #else |
| #define pci_debug(fmt, ...) |
| #endif |
| |
| #define PCIE500_CFGADDR 0x0 |
| #define PCIE500_CFGDATA 0x4 |
| #define PCIE500_REG_BASE 0xC00 |
| #define PCIE500_REG_SIZE (0x1000 - PCIE500_REG_BASE) |
| |
| #define PPCE500_PCI_CONFIG_ADDR 0x0 |
| #define PPCE500_PCI_CONFIG_DATA 0x4 |
| #define PPCE500_PCI_INTACK 0x8 |
| |
| #define PPCE500_PCI_OW1 (0xC20 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_OW2 (0xC40 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_OW3 (0xC60 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_OW4 (0xC80 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_IW3 (0xDA0 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_IW2 (0xDC0 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_IW1 (0xDE0 - PCIE500_REG_BASE) |
| |
| #define PPCE500_PCI_GASKET_TIMR (0xE20 - PCIE500_REG_BASE) |
| |
| #define PCI_POTAR 0x0 |
| #define PCI_POTEAR 0x4 |
| #define PCI_POWBAR 0x8 |
| #define PCI_POWAR 0x10 |
| |
| #define PCI_PITAR 0x0 |
| #define PCI_PIWBAR 0x8 |
| #define PCI_PIWBEAR 0xC |
| #define PCI_PIWAR 0x10 |
| |
| #define PPCE500_PCI_NR_POBS 5 |
| #define PPCE500_PCI_NR_PIBS 3 |
| |
| struct pci_outbound { |
| uint32_t potar; |
| uint32_t potear; |
| uint32_t powbar; |
| uint32_t powar; |
| }; |
| |
| struct pci_inbound { |
| uint32_t pitar; |
| uint32_t piwbar; |
| uint32_t piwbear; |
| uint32_t piwar; |
| }; |
| |
| struct PPCE500PCIState { |
| struct pci_outbound pob[PPCE500_PCI_NR_POBS]; |
| struct pci_inbound pib[PPCE500_PCI_NR_PIBS]; |
| uint32_t gasket_time; |
| PCIHostState pci_state; |
| PCIDevice *pci_dev; |
| }; |
| |
| typedef struct PPCE500PCIState PPCE500PCIState; |
| |
| static uint32_t pci_reg_read4(void *opaque, target_phys_addr_t addr) |
| { |
| PPCE500PCIState *pci = opaque; |
| unsigned long win; |
| uint32_t value = 0; |
| |
| win = addr & 0xfe0; |
| |
| switch (win) { |
| case PPCE500_PCI_OW1: |
| case PPCE500_PCI_OW2: |
| case PPCE500_PCI_OW3: |
| case PPCE500_PCI_OW4: |
| switch (addr & 0xC) { |
| case PCI_POTAR: value = pci->pob[(addr >> 5) & 0x7].potar; break; |
| case PCI_POTEAR: value = pci->pob[(addr >> 5) & 0x7].potear; break; |
| case PCI_POWBAR: value = pci->pob[(addr >> 5) & 0x7].powbar; break; |
| case PCI_POWAR: value = pci->pob[(addr >> 5) & 0x7].powar; break; |
| default: break; |
| } |
| break; |
| |
| case PPCE500_PCI_IW3: |
| case PPCE500_PCI_IW2: |
| case PPCE500_PCI_IW1: |
| switch (addr & 0xC) { |
| case PCI_PITAR: value = pci->pib[(addr >> 5) & 0x3].pitar; break; |
| case PCI_PIWBAR: value = pci->pib[(addr >> 5) & 0x3].piwbar; break; |
| case PCI_PIWBEAR: value = pci->pib[(addr >> 5) & 0x3].piwbear; break; |
| case PCI_PIWAR: value = pci->pib[(addr >> 5) & 0x3].piwar; break; |
| default: break; |
| }; |
| break; |
| |
| case PPCE500_PCI_GASKET_TIMR: |
| value = pci->gasket_time; |
| break; |
| |
| default: |
| break; |
| } |
| |
| pci_debug("%s: win:%lx(addr:" TARGET_FMT_plx ") -> value:%x\n", __func__, |
| win, addr, value); |
| return value; |
| } |
| |
| static CPUReadMemoryFunc * const e500_pci_reg_read[] = { |
| &pci_reg_read4, |
| &pci_reg_read4, |
| &pci_reg_read4, |
| }; |
| |
| static void pci_reg_write4(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| PPCE500PCIState *pci = opaque; |
| unsigned long win; |
| |
| win = addr & 0xfe0; |
| |
| pci_debug("%s: value:%x -> win:%lx(addr:" TARGET_FMT_plx ")\n", |
| __func__, value, win, addr); |
| |
| switch (win) { |
| case PPCE500_PCI_OW1: |
| case PPCE500_PCI_OW2: |
| case PPCE500_PCI_OW3: |
| case PPCE500_PCI_OW4: |
| switch (addr & 0xC) { |
| case PCI_POTAR: pci->pob[(addr >> 5) & 0x7].potar = value; break; |
| case PCI_POTEAR: pci->pob[(addr >> 5) & 0x7].potear = value; break; |
| case PCI_POWBAR: pci->pob[(addr >> 5) & 0x7].powbar = value; break; |
| case PCI_POWAR: pci->pob[(addr >> 5) & 0x7].powar = value; break; |
| default: break; |
| }; |
| break; |
| |
| case PPCE500_PCI_IW3: |
| case PPCE500_PCI_IW2: |
| case PPCE500_PCI_IW1: |
| switch (addr & 0xC) { |
| case PCI_PITAR: pci->pib[(addr >> 5) & 0x3].pitar = value; break; |
| case PCI_PIWBAR: pci->pib[(addr >> 5) & 0x3].piwbar = value; break; |
| case PCI_PIWBEAR: pci->pib[(addr >> 5) & 0x3].piwbear = value; break; |
| case PCI_PIWAR: pci->pib[(addr >> 5) & 0x3].piwar = value; break; |
| default: break; |
| }; |
| break; |
| |
| case PPCE500_PCI_GASKET_TIMR: |
| pci->gasket_time = value; |
| break; |
| |
| default: |
| break; |
| }; |
| } |
| |
| static CPUWriteMemoryFunc * const e500_pci_reg_write[] = { |
| &pci_reg_write4, |
| &pci_reg_write4, |
| &pci_reg_write4, |
| }; |
| |
| static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int irq_num) |
| { |
| int devno = pci_dev->devfn >> 3, ret = 0; |
| |
| switch (devno) { |
| /* Two PCI slot */ |
| case 0x11: |
| case 0x12: |
| ret = (irq_num + devno - 0x10) % 4; |
| break; |
| default: |
| printf("Error:%s:unknow dev number\n", __func__); |
| } |
| |
| pci_debug("%s: devfn %x irq %d -> %d devno:%x\n", __func__, |
| pci_dev->devfn, irq_num, ret, devno); |
| |
| return ret; |
| } |
| |
| static void mpc85xx_pci_set_irq(void *opaque, int irq_num, int level) |
| { |
| qemu_irq *pic = opaque; |
| |
| pci_debug("%s: PCI irq %d, level:%d\n", __func__, irq_num, level); |
| |
| qemu_set_irq(pic[irq_num], level); |
| } |
| |
| static void ppce500_pci_save(QEMUFile *f, void *opaque) |
| { |
| PPCE500PCIState *controller = opaque; |
| int i; |
| |
| pci_device_save(controller->pci_dev, f); |
| |
| for (i = 0; i < PPCE500_PCI_NR_POBS; i++) { |
| qemu_put_be32s(f, &controller->pob[i].potar); |
| qemu_put_be32s(f, &controller->pob[i].potear); |
| qemu_put_be32s(f, &controller->pob[i].powbar); |
| qemu_put_be32s(f, &controller->pob[i].powar); |
| } |
| |
| for (i = 0; i < PPCE500_PCI_NR_PIBS; i++) { |
| qemu_put_be32s(f, &controller->pib[i].pitar); |
| qemu_put_be32s(f, &controller->pib[i].piwbar); |
| qemu_put_be32s(f, &controller->pib[i].piwbear); |
| qemu_put_be32s(f, &controller->pib[i].piwar); |
| } |
| qemu_put_be32s(f, &controller->gasket_time); |
| } |
| |
| static int ppce500_pci_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| PPCE500PCIState *controller = opaque; |
| int i; |
| |
| if (version_id != 1) |
| return -EINVAL; |
| |
| pci_device_load(controller->pci_dev, f); |
| |
| for (i = 0; i < PPCE500_PCI_NR_POBS; i++) { |
| qemu_get_be32s(f, &controller->pob[i].potar); |
| qemu_get_be32s(f, &controller->pob[i].potear); |
| qemu_get_be32s(f, &controller->pob[i].powbar); |
| qemu_get_be32s(f, &controller->pob[i].powar); |
| } |
| |
| for (i = 0; i < PPCE500_PCI_NR_PIBS; i++) { |
| qemu_get_be32s(f, &controller->pib[i].pitar); |
| qemu_get_be32s(f, &controller->pib[i].piwbar); |
| qemu_get_be32s(f, &controller->pib[i].piwbear); |
| qemu_get_be32s(f, &controller->pib[i].piwar); |
| } |
| qemu_get_be32s(f, &controller->gasket_time); |
| |
| return 0; |
| } |
| |
| PCIBus *ppce500_pci_init(qemu_irq pci_irqs[4], target_phys_addr_t registers) |
| { |
| PPCE500PCIState *controller; |
| PCIDevice *d; |
| int index; |
| static int ppce500_pci_id; |
| |
| controller = qemu_mallocz(sizeof(PPCE500PCIState)); |
| |
| controller->pci_state.bus = pci_register_bus(NULL, "pci", |
| mpc85xx_pci_set_irq, |
| mpc85xx_pci_map_irq, |
| pci_irqs, PCI_DEVFN(0x11, 0), |
| 4); |
| d = pci_register_device(controller->pci_state.bus, |
| "host bridge", sizeof(PCIDevice), |
| 0, NULL, NULL); |
| |
| pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_FREESCALE); |
| pci_config_set_device_id(d->config, PCI_DEVICE_ID_MPC8533E); |
| pci_config_set_class(d->config, PCI_CLASS_PROCESSOR_POWERPC); |
| |
| controller->pci_dev = d; |
| |
| /* CFGADDR */ |
| index = pci_host_conf_register_mmio(&controller->pci_state, 0); |
| if (index < 0) |
| goto free; |
| cpu_register_physical_memory(registers + PCIE500_CFGADDR, 4, index); |
| |
| /* CFGDATA */ |
| index = pci_host_data_register_mmio(&controller->pci_state, 0); |
| if (index < 0) |
| goto free; |
| cpu_register_physical_memory(registers + PCIE500_CFGDATA, 4, index); |
| |
| index = cpu_register_io_memory(e500_pci_reg_read, |
| e500_pci_reg_write, controller); |
| if (index < 0) |
| goto free; |
| cpu_register_physical_memory(registers + PCIE500_REG_BASE, |
| PCIE500_REG_SIZE, index); |
| |
| /* XXX load/save code not tested. */ |
| register_savevm(&d->qdev, "ppce500_pci", ppce500_pci_id++, |
| 1, ppce500_pci_save, ppce500_pci_load, controller); |
| |
| return controller->pci_state.bus; |
| |
| free: |
| printf("%s error\n", __func__); |
| qemu_free(controller); |
| return NULL; |
| } |