hw/arm11mpcore.c - qemu - Git at Google

 /*
  * ARM11MPCore internal peripheral emulation.
  *
  * Copyright (c) 2006-2007 CodeSourcery.
  * Written by Paul Brook
  *
  * This code is licensed under the GPL.
  */

 #include "sysbus.h"
 #include "qemu-timer.h"

 /* MPCore private memory region.  */

 typedef struct mpcore_priv_state {
     SysBusDevice busdev;
     uint32_t scu_control;
     int iomemtype;
     uint32_t old_timer_status[8];
     uint32_t num_cpu;
     MemoryRegion iomem;
     MemoryRegion container;
     DeviceState *mptimer;
     DeviceState *gic;
     uint32_t num_irq;
 } mpcore_priv_state;

 /* Per-CPU private memory mapped IO.  */

 static uint64_t mpcore_scu_read(void *opaque, hwaddr offset,
                                 unsigned size)
 {
     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
     int id;
     /* SCU */
     switch (offset) {
     case 0x00: /* Control.  */
         return s->scu_control;
     case 0x04: /* Configuration.  */
         id = ((1 << s->num_cpu) - 1) << 4;
         return id | (s->num_cpu - 1);
     case 0x08: /* CPU status.  */
         return 0;
     case 0x0c: /* Invalidate all.  */
         return 0;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "mpcore_priv_read: Bad offset %x\n", (int)offset);
         return 0;
     }
 }

 static void mpcore_scu_write(void *opaque, hwaddr offset,
                              uint64_t value, unsigned size)
 {
     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
     /* SCU */
     switch (offset) {
     case 0: /* Control register.  */
         s->scu_control = value & 1;
         break;
     case 0x0c: /* Invalidate all.  */
         /* This is a no-op as cache is not emulated.  */
         break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "mpcore_priv_read: Bad offset %x\n", (int)offset);
     }
 }

 static const MemoryRegionOps mpcore_scu_ops = {
     .read = mpcore_scu_read,
     .write = mpcore_scu_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };

 static void mpcore_priv_set_irq(void *opaque, int irq, int level)
 {
     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
     qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level);
 }

 static void mpcore_priv_map_setup(mpcore_priv_state *s)
 {
     int i;
     SysBusDevice *gicbusdev = sysbus_from_qdev(s->gic);
     SysBusDevice *busdev = sysbus_from_qdev(s->mptimer);
     memory_region_init(&s->container, "mpcode-priv-container", 0x2000);
     memory_region_init_io(&s->iomem, &mpcore_scu_ops, s, "mpcore-scu", 0x100);
     memory_region_add_subregion(&s->container, 0, &s->iomem);
     /* GIC CPU interfaces: "current CPU" at 0x100, then specific CPUs
      * at 0x200, 0x300...
      */
     for (i = 0; i < (s->num_cpu + 1); i++) {
         hwaddr offset = 0x100 + (i * 0x100);
         memory_region_add_subregion(&s->container, offset,
                                     sysbus_mmio_get_region(gicbusdev, i + 1));
     }
     /* Add the regions for timer and watchdog for "current CPU" and
      * for each specific CPU.
      */
     for (i = 0; i < (s->num_cpu + 1) * 2; i++) {
         /* Timers at 0x600, 0x700, ...; watchdogs at 0x620, 0x720, ... */
         hwaddr offset = 0x600 + (i >> 1) * 0x100 + (i & 1) * 0x20;
         memory_region_add_subregion(&s->container, offset,
                                     sysbus_mmio_get_region(busdev, i));
     }
     memory_region_add_subregion(&s->container, 0x1000,
                                 sysbus_mmio_get_region(gicbusdev, 0));
     /* Wire up the interrupt from each watchdog and timer.
      * For each core the timer is PPI 29 and the watchdog PPI 30.
      */
     for (i = 0; i < s->num_cpu; i++) {
         int ppibase = (s->num_irq - 32) + i * 32;
         sysbus_connect_irq(busdev, i * 2,
                            qdev_get_gpio_in(s->gic, ppibase + 29));
         sysbus_connect_irq(busdev, i * 2 + 1,
                            qdev_get_gpio_in(s->gic, ppibase + 30));
     }
 }

 static int mpcore_priv_init(SysBusDevice *dev)
 {
     mpcore_priv_state *s = FROM_SYSBUS(mpcore_priv_state, dev);

     s->gic = qdev_create(NULL, "arm_gic");
     qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
     qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
     /* Request the legacy 11MPCore GIC behaviour: */
     qdev_prop_set_uint32(s->gic, "revision", 0);
     qdev_init_nofail(s->gic);

     /* Pass through outbound IRQ lines from the GIC */
     sysbus_pass_irq(dev, sysbus_from_qdev(s->gic));

     /* Pass through inbound GPIO lines to the GIC */
     qdev_init_gpio_in(&s->busdev.qdev, mpcore_priv_set_irq, s->num_irq - 32);

     s->mptimer = qdev_create(NULL, "arm_mptimer");
     qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
     qdev_init_nofail(s->mptimer);
     mpcore_priv_map_setup(s);
     sysbus_init_mmio(dev, &s->container);
     return 0;
 }

 /* Dummy PIC to route IRQ lines.  The baseboard has 4 independent IRQ
    controllers.  The output of these, plus some of the raw input lines
    are fed into a single SMP-aware interrupt controller on the CPU.  */
 typedef struct {
     SysBusDevice busdev;
     SysBusDevice *priv;
     qemu_irq cpuic[32];
     qemu_irq rvic[4][64];
     uint32_t num_cpu;
 } mpcore_rirq_state;

 /* Map baseboard IRQs onto CPU IRQ lines.  */
 static const int mpcore_irq_map[32] = {
     -1, -1, -1, -1,  1,  2, -1, -1,
     -1, -1,  6, -1,  4,  5, -1, -1,
     -1, 14, 15,  0,  7,  8, -1, -1,
     -1, -1, -1, -1,  9,  3, -1, -1,
 };

 static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
 {
     mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
     int i;

     for (i = 0; i < 4; i++) {
         qemu_set_irq(s->rvic[i][irq], level);
     }
     if (irq < 32) {
         irq = mpcore_irq_map[irq];
         if (irq >= 0) {
             qemu_set_irq(s->cpuic[irq], level);
         }
     }
 }

 static int realview_mpcore_init(SysBusDevice *dev)
 {
     mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
     DeviceState *gic;
     DeviceState *priv;
     int n;
     int i;

     priv = qdev_create(NULL, "arm11mpcore_priv");
     qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
     qdev_init_nofail(priv);
     s->priv = sysbus_from_qdev(priv);
     sysbus_pass_irq(dev, s->priv);
     for (i = 0; i < 32; i++) {
         s->cpuic[i] = qdev_get_gpio_in(priv, i);
     }
     /* ??? IRQ routing is hardcoded to "normal" mode.  */
     for (n = 0; n < 4; n++) {
         gic = sysbus_create_simple("realview_gic", 0x10040000 + n * 0x10000,
                                    s->cpuic[10 + n]);
         for (i = 0; i < 64; i++) {
             s->rvic[n][i] = qdev_get_gpio_in(gic, i);
         }
     }
     qdev_init_gpio_in(&dev->qdev, mpcore_rirq_set_irq, 64);
     sysbus_init_mmio(dev, sysbus_mmio_get_region(s->priv, 0));
     return 0;
 }

 static Property mpcore_rirq_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
     DEFINE_PROP_END_OF_LIST(),
 };

 static void mpcore_rirq_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

     k->init = realview_mpcore_init;
     dc->props = mpcore_rirq_properties;
 }

 static TypeInfo mpcore_rirq_info = {
     .name          = "realview_mpcore",
     .parent        = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(mpcore_rirq_state),
     .class_init    = mpcore_rirq_class_init,
 };

 static Property mpcore_priv_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
     /* The ARM11 MPCORE TRM says the on-chip controller may have
      * anything from 0 to 224 external interrupt IRQ lines (with another
      * 32 internal). We default to 32+32, which is the number provided by
      * the ARM11 MPCore test chip in the Realview Versatile Express
      * coretile. Other boards may differ and should set this property
      * appropriately. Some Linux kernels may not boot if the hardware
      * has more IRQ lines than the kernel expects.
      */
     DEFINE_PROP_UINT32("num-irq", mpcore_priv_state, num_irq, 64),
     DEFINE_PROP_END_OF_LIST(),
 };

 static void mpcore_priv_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

     k->init = mpcore_priv_init;
     dc->props = mpcore_priv_properties;
 }

 static TypeInfo mpcore_priv_info = {
     .name          = "arm11mpcore_priv",
     .parent        = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(mpcore_priv_state),
     .class_init    = mpcore_priv_class_init,
 };

 static void arm11mpcore_register_types(void)
 {
     type_register_static(&mpcore_rirq_info);
     type_register_static(&mpcore_priv_info);
 }

 type_init(arm11mpcore_register_types)
	/*
	* ARM11MPCore internal peripheral emulation.
	*
	* Copyright (c) 2006-2007 CodeSourcery.
	* Written by Paul Brook
	*
	* This code is licensed under the GPL.
	*/

	#include "sysbus.h"
	#include "qemu-timer.h"

	/* MPCore private memory region. */

	typedef struct mpcore_priv_state {
	SysBusDevice busdev;
	uint32_t scu_control;
	int iomemtype;
	uint32_t old_timer_status[8];
	uint32_t num_cpu;
	MemoryRegion iomem;
	MemoryRegion container;
	DeviceState *mptimer;
	DeviceState *gic;
	uint32_t num_irq;
	} mpcore_priv_state;

	/* Per-CPU private memory mapped IO. */

	static uint64_t mpcore_scu_read(void *opaque, hwaddr offset,
	unsigned size)
	{
	mpcore_priv_state s = (mpcore_priv_state )opaque;
	int id;
	/* SCU */
	switch (offset) {
	case 0x00: /* Control. */
	return s->scu_control;
	case 0x04: /* Configuration. */
	id = ((1 << s->num_cpu) - 1) << 4;
	return id \| (s->num_cpu - 1);
	case 0x08: /* CPU status. */
	return 0;
	case 0x0c: /* Invalidate all. */
	return 0;
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"mpcore_priv_read: Bad offset %x\n", (int)offset);
	return 0;
	}
	}

	static void mpcore_scu_write(void *opaque, hwaddr offset,
	uint64_t value, unsigned size)
	{
	mpcore_priv_state s = (mpcore_priv_state )opaque;
	/* SCU */
	switch (offset) {
	case 0: /* Control register. */
	s->scu_control = value & 1;
	break;
	case 0x0c: /* Invalidate all. */
	/* This is a no-op as cache is not emulated. */
	break;
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"mpcore_priv_read: Bad offset %x\n", (int)offset);
	}
	}

	static const MemoryRegionOps mpcore_scu_ops = {
	.read = mpcore_scu_read,
	.write = mpcore_scu_write,
	.endianness = DEVICE_NATIVE_ENDIAN,
	};

	static void mpcore_priv_set_irq(void *opaque, int irq, int level)
	{
	mpcore_priv_state s = (mpcore_priv_state )opaque;
	qemu_set_irq(qdev_get_gpio_in(s->gic, irq), level);
	}

	static void mpcore_priv_map_setup(mpcore_priv_state *s)
	{
	int i;
	SysBusDevice *gicbusdev = sysbus_from_qdev(s->gic);
	SysBusDevice *busdev = sysbus_from_qdev(s->mptimer);
	memory_region_init(&s->container, "mpcode-priv-container", 0x2000);
	memory_region_init_io(&s->iomem, &mpcore_scu_ops, s, "mpcore-scu", 0x100);
	memory_region_add_subregion(&s->container, 0, &s->iomem);
	/* GIC CPU interfaces: "current CPU" at 0x100, then specific CPUs
	* at 0x200, 0x300...
	*/
	for (i = 0; i < (s->num_cpu + 1); i++) {
	hwaddr offset = 0x100 + (i * 0x100);
	memory_region_add_subregion(&s->container, offset,
	sysbus_mmio_get_region(gicbusdev, i + 1));
	}
	/* Add the regions for timer and watchdog for "current CPU" and
	* for each specific CPU.
	*/
	for (i = 0; i < (s->num_cpu + 1) * 2; i++) {
	/* Timers at 0x600, 0x700, ...; watchdogs at 0x620, 0x720, ... */
	hwaddr offset = 0x600 + (i >> 1) * 0x100 + (i & 1) * 0x20;
	memory_region_add_subregion(&s->container, offset,
	sysbus_mmio_get_region(busdev, i));
	}
	memory_region_add_subregion(&s->container, 0x1000,
	sysbus_mmio_get_region(gicbusdev, 0));
	/* Wire up the interrupt from each watchdog and timer.
	* For each core the timer is PPI 29 and the watchdog PPI 30.
	*/
	for (i = 0; i < s->num_cpu; i++) {
	int ppibase = (s->num_irq - 32) + i * 32;
	sysbus_connect_irq(busdev, i * 2,
	qdev_get_gpio_in(s->gic, ppibase + 29));
	sysbus_connect_irq(busdev, i * 2 + 1,
	qdev_get_gpio_in(s->gic, ppibase + 30));
	}
	}

	static int mpcore_priv_init(SysBusDevice *dev)
	{
	mpcore_priv_state *s = FROM_SYSBUS(mpcore_priv_state, dev);

	s->gic = qdev_create(NULL, "arm_gic");
	qdev_prop_set_uint32(s->gic, "num-cpu", s->num_cpu);
	qdev_prop_set_uint32(s->gic, "num-irq", s->num_irq);
	/* Request the legacy 11MPCore GIC behaviour: */
	qdev_prop_set_uint32(s->gic, "revision", 0);
	qdev_init_nofail(s->gic);

	/* Pass through outbound IRQ lines from the GIC */
	sysbus_pass_irq(dev, sysbus_from_qdev(s->gic));

	/* Pass through inbound GPIO lines to the GIC */
	qdev_init_gpio_in(&s->busdev.qdev, mpcore_priv_set_irq, s->num_irq - 32);

	s->mptimer = qdev_create(NULL, "arm_mptimer");
	qdev_prop_set_uint32(s->mptimer, "num-cpu", s->num_cpu);
	qdev_init_nofail(s->mptimer);
	mpcore_priv_map_setup(s);
	sysbus_init_mmio(dev, &s->container);
	return 0;
	}

	/* Dummy PIC to route IRQ lines. The baseboard has 4 independent IRQ
	controllers. The output of these, plus some of the raw input lines
	are fed into a single SMP-aware interrupt controller on the CPU. */
	typedef struct {
	SysBusDevice busdev;
	SysBusDevice *priv;
	qemu_irq cpuic[32];
	qemu_irq rvic[4][64];
	uint32_t num_cpu;
	} mpcore_rirq_state;

	/* Map baseboard IRQs onto CPU IRQ lines. */
	static const int mpcore_irq_map[32] = {
	-1, -1, -1, -1, 1, 2, -1, -1,
	-1, -1, 6, -1, 4, 5, -1, -1,
	-1, 14, 15, 0, 7, 8, -1, -1,
	-1, -1, -1, -1, 9, 3, -1, -1,
	};

	static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
	{
	mpcore_rirq_state s = (mpcore_rirq_state )opaque;
	int i;

	for (i = 0; i < 4; i++) {
	qemu_set_irq(s->rvic[i][irq], level);
	}
	if (irq < 32) {
	irq = mpcore_irq_map[irq];
	if (irq >= 0) {
	qemu_set_irq(s->cpuic[irq], level);
	}
	}
	}

	static int realview_mpcore_init(SysBusDevice *dev)
	{
	mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
	DeviceState *gic;
	DeviceState *priv;
	int n;
	int i;

	priv = qdev_create(NULL, "arm11mpcore_priv");
	qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
	qdev_init_nofail(priv);
	s->priv = sysbus_from_qdev(priv);
	sysbus_pass_irq(dev, s->priv);
	for (i = 0; i < 32; i++) {
	s->cpuic[i] = qdev_get_gpio_in(priv, i);
	}
	/* ??? IRQ routing is hardcoded to "normal" mode. */
	for (n = 0; n < 4; n++) {
	gic = sysbus_create_simple("realview_gic", 0x10040000 + n * 0x10000,
	s->cpuic[10 + n]);
	for (i = 0; i < 64; i++) {
	s->rvic[n][i] = qdev_get_gpio_in(gic, i);
	}
	}
	qdev_init_gpio_in(&dev->qdev, mpcore_rirq_set_irq, 64);
	sysbus_init_mmio(dev, sysbus_mmio_get_region(s->priv, 0));
	return 0;
	}

	static Property mpcore_rirq_properties[] = {
	DEFINE_PROP_UINT32("num-cpu", mpcore_rirq_state, num_cpu, 1),
	DEFINE_PROP_END_OF_LIST(),
	};

	static void mpcore_rirq_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);
	SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

	k->init = realview_mpcore_init;
	dc->props = mpcore_rirq_properties;
	}

	static TypeInfo mpcore_rirq_info = {
	.name = "realview_mpcore",
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(mpcore_rirq_state),
	.class_init = mpcore_rirq_class_init,
	};

	static Property mpcore_priv_properties[] = {
	DEFINE_PROP_UINT32("num-cpu", mpcore_priv_state, num_cpu, 1),
	/* The ARM11 MPCORE TRM says the on-chip controller may have
	* anything from 0 to 224 external interrupt IRQ lines (with another
	* 32 internal). We default to 32+32, which is the number provided by
	* the ARM11 MPCore test chip in the Realview Versatile Express
	* coretile. Other boards may differ and should set this property
	* appropriately. Some Linux kernels may not boot if the hardware
	* has more IRQ lines than the kernel expects.
	*/
	DEFINE_PROP_UINT32("num-irq", mpcore_priv_state, num_irq, 64),
	DEFINE_PROP_END_OF_LIST(),
	};

	static void mpcore_priv_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);
	SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);

	k->init = mpcore_priv_init;
	dc->props = mpcore_priv_properties;
	}

	static TypeInfo mpcore_priv_info = {
	.name = "arm11mpcore_priv",
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(mpcore_priv_state),
	.class_init = mpcore_priv_class_init,
	};

	static void arm11mpcore_register_types(void)
	{
	type_register_static(&mpcore_rirq_info);
	type_register_static(&mpcore_priv_info);
	}

	type_init(arm11mpcore_register_types)