| /* |
| * Tester for VSCARD protocol, client side. |
| * |
| * Can be used with ccid-card-passthru. |
| * |
| * Copyright (c) 2011 Red Hat. |
| * Written by Alon Levy. |
| * |
| * This work is licensed under the terms of the GNU LGPL, version 2.1 or later. |
| * See the COPYING.LIB file in the top-level directory. |
| */ |
| |
| #ifndef _WIN32 |
| #include <sys/socket.h> |
| #include <netinet/in.h> |
| #include <netdb.h> |
| #define closesocket(x) close(x) |
| #endif |
| |
| #include "qemu-common.h" |
| |
| #include "vscard_common.h" |
| |
| #include "vreader.h" |
| #include "vcard_emul.h" |
| #include "vevent.h" |
| |
| static int verbose; |
| |
| static void |
| print_byte_array( |
| uint8_t *arrBytes, |
| unsigned int nSize |
| ) { |
| int i; |
| for (i = 0; i < nSize; i++) { |
| printf("%02X ", arrBytes[i]); |
| } |
| printf("\n"); |
| } |
| |
| static void |
| print_usage(void) { |
| printf("vscclient [-c <certname> .. -e <emul_args> -d <level>%s] " |
| "<host> <port>\n", |
| #ifdef USE_PASSTHRU |
| " -p"); |
| printf(" -p use passthrough mode\n"); |
| #else |
| ""); |
| #endif |
| vcard_emul_usage(); |
| } |
| |
| static GIOChannel *channel_socket; |
| static GByteArray *socket_to_send; |
| static CompatGMutex socket_to_send_lock; |
| static guint socket_tag; |
| |
| static void |
| update_socket_watch(void); |
| |
| static gboolean |
| do_socket_send(GIOChannel *source, |
| GIOCondition condition, |
| gpointer data) |
| { |
| gsize bw; |
| GError *err = NULL; |
| |
| g_return_val_if_fail(socket_to_send->len != 0, FALSE); |
| g_return_val_if_fail(condition & G_IO_OUT, FALSE); |
| |
| g_io_channel_write_chars(channel_socket, |
| (gchar *)socket_to_send->data, socket_to_send->len, &bw, &err); |
| if (err != NULL) { |
| g_error("Error while sending socket %s", err->message); |
| return FALSE; |
| } |
| g_byte_array_remove_range(socket_to_send, 0, bw); |
| |
| if (socket_to_send->len == 0) { |
| update_socket_watch(); |
| return FALSE; |
| } |
| return TRUE; |
| } |
| |
| static gboolean |
| socket_prepare_sending(gpointer user_data) |
| { |
| update_socket_watch(); |
| |
| return FALSE; |
| } |
| |
| static int |
| send_msg( |
| VSCMsgType type, |
| uint32_t reader_id, |
| const void *msg, |
| unsigned int length |
| ) { |
| VSCMsgHeader mhHeader; |
| |
| g_mutex_lock(&socket_to_send_lock); |
| |
| if (verbose > 10) { |
| printf("sending type=%d id=%u, len =%u (0x%x)\n", |
| type, reader_id, length, length); |
| } |
| |
| mhHeader.type = htonl(type); |
| mhHeader.reader_id = 0; |
| mhHeader.length = htonl(length); |
| g_byte_array_append(socket_to_send, (guint8 *)&mhHeader, sizeof(mhHeader)); |
| g_byte_array_append(socket_to_send, (guint8 *)msg, length); |
| g_idle_add(socket_prepare_sending, NULL); |
| |
| g_mutex_unlock(&socket_to_send_lock); |
| |
| return 0; |
| } |
| |
| static VReader *pending_reader; |
| static CompatGMutex pending_reader_lock; |
| static CompatGCond pending_reader_condition; |
| |
| #define MAX_ATR_LEN 40 |
| static gpointer |
| event_thread(gpointer arg) |
| { |
| unsigned char atr[MAX_ATR_LEN]; |
| int atr_len; |
| VEvent *event; |
| unsigned int reader_id; |
| |
| |
| while (1) { |
| const char *reader_name; |
| |
| event = vevent_wait_next_vevent(); |
| if (event == NULL) { |
| break; |
| } |
| reader_id = vreader_get_id(event->reader); |
| if (reader_id == VSCARD_UNDEFINED_READER_ID && |
| event->type != VEVENT_READER_INSERT) { |
| /* ignore events from readers qemu has rejected */ |
| /* if qemu is still deciding on this reader, wait to see if need to |
| * forward this event */ |
| g_mutex_lock(&pending_reader_lock); |
| if (!pending_reader || (pending_reader != event->reader)) { |
| /* wasn't for a pending reader, this reader has already been |
| * rejected by qemu */ |
| g_mutex_unlock(&pending_reader_lock); |
| vevent_delete(event); |
| continue; |
| } |
| /* this reader hasn't been told its status from qemu yet, wait for |
| * that status */ |
| while (pending_reader != NULL) { |
| g_cond_wait(&pending_reader_condition, &pending_reader_lock); |
| } |
| g_mutex_unlock(&pending_reader_lock); |
| /* now recheck the id */ |
| reader_id = vreader_get_id(event->reader); |
| if (reader_id == VSCARD_UNDEFINED_READER_ID) { |
| /* this reader was rejected */ |
| vevent_delete(event); |
| continue; |
| } |
| /* reader was accepted, now forward the event */ |
| } |
| switch (event->type) { |
| case VEVENT_READER_INSERT: |
| /* tell qemu to insert a new CCID reader */ |
| /* wait until qemu has responded to our first reader insert |
| * before we send a second. That way we won't confuse the responses |
| * */ |
| g_mutex_lock(&pending_reader_lock); |
| while (pending_reader != NULL) { |
| g_cond_wait(&pending_reader_condition, &pending_reader_lock); |
| } |
| pending_reader = vreader_reference(event->reader); |
| g_mutex_unlock(&pending_reader_lock); |
| reader_name = vreader_get_name(event->reader); |
| if (verbose > 10) { |
| printf(" READER INSERT: %s\n", reader_name); |
| } |
| send_msg(VSC_ReaderAdd, |
| reader_id, /* currerntly VSCARD_UNDEFINED_READER_ID */ |
| NULL, 0 /* TODO reader_name, strlen(reader_name) */); |
| break; |
| case VEVENT_READER_REMOVE: |
| /* future, tell qemu that an old CCID reader has been removed */ |
| if (verbose > 10) { |
| printf(" READER REMOVE: %u\n", reader_id); |
| } |
| send_msg(VSC_ReaderRemove, reader_id, NULL, 0); |
| break; |
| case VEVENT_CARD_INSERT: |
| /* get the ATR (intended as a response to a power on from the |
| * reader */ |
| atr_len = MAX_ATR_LEN; |
| vreader_power_on(event->reader, atr, &atr_len); |
| /* ATR call functions as a Card Insert event */ |
| if (verbose > 10) { |
| printf(" CARD INSERT %u: ", reader_id); |
| print_byte_array(atr, atr_len); |
| } |
| send_msg(VSC_ATR, reader_id, atr, atr_len); |
| break; |
| case VEVENT_CARD_REMOVE: |
| /* Card removed */ |
| if (verbose > 10) { |
| printf(" CARD REMOVE %u:\n", reader_id); |
| } |
| send_msg(VSC_CardRemove, reader_id, NULL, 0); |
| break; |
| default: |
| break; |
| } |
| vevent_delete(event); |
| } |
| return NULL; |
| } |
| |
| |
| static unsigned int |
| get_id_from_string(char *string, unsigned int default_id) |
| { |
| unsigned int id = atoi(string); |
| |
| /* don't accidentally swith to zero because no numbers have been supplied */ |
| if ((id == 0) && *string != '0') { |
| return default_id; |
| } |
| return id; |
| } |
| |
| static int |
| on_host_init(VSCMsgHeader *mhHeader, VSCMsgInit *incoming) |
| { |
| uint32_t *capabilities = (incoming->capabilities); |
| int num_capabilities = |
| 1 + ((mhHeader->length - sizeof(VSCMsgInit)) / sizeof(uint32_t)); |
| int i; |
| |
| incoming->version = ntohl(incoming->version); |
| if (incoming->version != VSCARD_VERSION) { |
| if (verbose > 0) { |
| printf("warning: host has version %d, we have %d\n", |
| verbose, VSCARD_VERSION); |
| } |
| } |
| if (incoming->magic != VSCARD_MAGIC) { |
| printf("unexpected magic: got %d, expected %d\n", |
| incoming->magic, VSCARD_MAGIC); |
| return -1; |
| } |
| for (i = 0 ; i < num_capabilities; ++i) { |
| capabilities[i] = ntohl(capabilities[i]); |
| } |
| /* Future: check capabilities */ |
| /* remove whatever reader might be left in qemu, |
| * in case of an unclean previous exit. */ |
| send_msg(VSC_ReaderRemove, VSCARD_MINIMAL_READER_ID, NULL, 0); |
| /* launch the event_thread. This will trigger reader adds for all the |
| * existing readers */ |
| g_thread_new("vsc/event", event_thread, NULL); |
| return 0; |
| } |
| |
| |
| enum { |
| STATE_HEADER, |
| STATE_MESSAGE, |
| }; |
| |
| #define APDUBufSize 270 |
| |
| static gboolean |
| do_socket_read(GIOChannel *source, |
| GIOCondition condition, |
| gpointer data) |
| { |
| int rv; |
| int dwSendLength; |
| int dwRecvLength; |
| uint8_t pbRecvBuffer[APDUBufSize]; |
| static uint8_t pbSendBuffer[APDUBufSize]; |
| VReaderStatus reader_status; |
| VReader *reader = NULL; |
| static VSCMsgHeader mhHeader; |
| VSCMsgError *error_msg; |
| GError *err = NULL; |
| |
| static gchar *buf; |
| static gsize br, to_read; |
| static int state = STATE_HEADER; |
| |
| if (state == STATE_HEADER && to_read == 0) { |
| buf = (gchar *)&mhHeader; |
| to_read = sizeof(mhHeader); |
| } |
| |
| if (to_read > 0) { |
| g_io_channel_read_chars(source, (gchar *)buf, to_read, &br, &err); |
| if (err != NULL) { |
| g_error("error while reading: %s", err->message); |
| } |
| buf += br; |
| to_read -= br; |
| if (to_read != 0) { |
| return TRUE; |
| } |
| } |
| |
| if (state == STATE_HEADER) { |
| mhHeader.type = ntohl(mhHeader.type); |
| mhHeader.reader_id = ntohl(mhHeader.reader_id); |
| mhHeader.length = ntohl(mhHeader.length); |
| if (verbose) { |
| printf("Header: type=%d, reader_id=%u length=%d (0x%x)\n", |
| mhHeader.type, mhHeader.reader_id, mhHeader.length, |
| mhHeader.length); |
| } |
| switch (mhHeader.type) { |
| case VSC_APDU: |
| case VSC_Flush: |
| case VSC_Error: |
| case VSC_Init: |
| buf = (gchar *)pbSendBuffer; |
| to_read = mhHeader.length; |
| state = STATE_MESSAGE; |
| return TRUE; |
| default: |
| fprintf(stderr, "Unexpected message of type 0x%X\n", mhHeader.type); |
| return FALSE; |
| } |
| } |
| |
| if (state == STATE_MESSAGE) { |
| switch (mhHeader.type) { |
| case VSC_APDU: |
| if (verbose) { |
| printf(" recv APDU: "); |
| print_byte_array(pbSendBuffer, mhHeader.length); |
| } |
| /* Transmit received APDU */ |
| dwSendLength = mhHeader.length; |
| dwRecvLength = sizeof(pbRecvBuffer); |
| reader = vreader_get_reader_by_id(mhHeader.reader_id); |
| reader_status = vreader_xfr_bytes(reader, |
| pbSendBuffer, dwSendLength, |
| pbRecvBuffer, &dwRecvLength); |
| if (reader_status == VREADER_OK) { |
| mhHeader.length = dwRecvLength; |
| if (verbose) { |
| printf(" send response: "); |
| print_byte_array(pbRecvBuffer, mhHeader.length); |
| } |
| send_msg(VSC_APDU, mhHeader.reader_id, |
| pbRecvBuffer, dwRecvLength); |
| } else { |
| rv = reader_status; /* warning: not meaningful */ |
| send_msg(VSC_Error, mhHeader.reader_id, &rv, sizeof(uint32_t)); |
| } |
| vreader_free(reader); |
| reader = NULL; /* we've freed it, don't use it by accident |
| again */ |
| break; |
| case VSC_Flush: |
| /* TODO: actually flush */ |
| send_msg(VSC_FlushComplete, mhHeader.reader_id, NULL, 0); |
| break; |
| case VSC_Error: |
| error_msg = (VSCMsgError *) pbSendBuffer; |
| if (error_msg->code == VSC_SUCCESS) { |
| g_mutex_lock(&pending_reader_lock); |
| if (pending_reader) { |
| vreader_set_id(pending_reader, mhHeader.reader_id); |
| vreader_free(pending_reader); |
| pending_reader = NULL; |
| g_cond_signal(&pending_reader_condition); |
| } |
| g_mutex_unlock(&pending_reader_lock); |
| break; |
| } |
| printf("warning: qemu refused to add reader\n"); |
| if (error_msg->code == VSC_CANNOT_ADD_MORE_READERS) { |
| /* clear pending reader, qemu can't handle any more */ |
| g_mutex_lock(&pending_reader_lock); |
| if (pending_reader) { |
| pending_reader = NULL; |
| /* make sure the event loop doesn't hang */ |
| g_cond_signal(&pending_reader_condition); |
| } |
| g_mutex_unlock(&pending_reader_lock); |
| } |
| break; |
| case VSC_Init: |
| if (on_host_init(&mhHeader, (VSCMsgInit *)pbSendBuffer) < 0) { |
| return FALSE; |
| } |
| break; |
| default: |
| g_assert_not_reached(); |
| return FALSE; |
| } |
| |
| state = STATE_HEADER; |
| } |
| |
| |
| return TRUE; |
| } |
| |
| static gboolean |
| do_socket(GIOChannel *source, |
| GIOCondition condition, |
| gpointer data) |
| { |
| /* not sure if two watches work well with a single win32 sources */ |
| if (condition & G_IO_OUT) { |
| if (!do_socket_send(source, condition, data)) { |
| return FALSE; |
| } |
| } |
| |
| if (condition & G_IO_IN) { |
| if (!do_socket_read(source, condition, data)) { |
| return FALSE; |
| } |
| } |
| |
| return TRUE; |
| } |
| |
| static void |
| update_socket_watch(void) |
| { |
| gboolean out = socket_to_send->len > 0; |
| |
| if (socket_tag != 0) { |
| g_source_remove(socket_tag); |
| } |
| |
| socket_tag = g_io_add_watch(channel_socket, |
| G_IO_IN | (out ? G_IO_OUT : 0), do_socket, NULL); |
| } |
| |
| static gboolean |
| do_command(GIOChannel *source, |
| GIOCondition condition, |
| gpointer data) |
| { |
| char *string; |
| VCardEmulError error; |
| static unsigned int default_reader_id; |
| unsigned int reader_id; |
| VReader *reader = NULL; |
| GError *err = NULL; |
| |
| g_assert(condition & G_IO_IN); |
| |
| reader_id = default_reader_id; |
| g_io_channel_read_line(source, &string, NULL, NULL, &err); |
| if (err != NULL) { |
| g_error("Error while reading command: %s", err->message); |
| } |
| |
| if (string != NULL) { |
| if (strncmp(string, "exit", 4) == 0) { |
| /* remove all the readers */ |
| VReaderList *list = vreader_get_reader_list(); |
| VReaderListEntry *reader_entry; |
| printf("Active Readers:\n"); |
| for (reader_entry = vreader_list_get_first(list); reader_entry; |
| reader_entry = vreader_list_get_next(reader_entry)) { |
| VReader *reader = vreader_list_get_reader(reader_entry); |
| vreader_id_t reader_id; |
| reader_id = vreader_get_id(reader); |
| if (reader_id == -1) { |
| continue; |
| } |
| /* be nice and signal card removal first (qemu probably should |
| * do this itself) */ |
| if (vreader_card_is_present(reader) == VREADER_OK) { |
| send_msg(VSC_CardRemove, reader_id, NULL, 0); |
| } |
| send_msg(VSC_ReaderRemove, reader_id, NULL, 0); |
| } |
| exit(0); |
| } else if (strncmp(string, "insert", 6) == 0) { |
| if (string[6] == ' ') { |
| reader_id = get_id_from_string(&string[7], reader_id); |
| } |
| reader = vreader_get_reader_by_id(reader_id); |
| if (reader != NULL) { |
| error = vcard_emul_force_card_insert(reader); |
| printf("insert %s, returned %d\n", |
| vreader_get_name(reader), error); |
| } else { |
| printf("no reader by id %u found\n", reader_id); |
| } |
| } else if (strncmp(string, "remove", 6) == 0) { |
| if (string[6] == ' ') { |
| reader_id = get_id_from_string(&string[7], reader_id); |
| } |
| reader = vreader_get_reader_by_id(reader_id); |
| if (reader != NULL) { |
| error = vcard_emul_force_card_remove(reader); |
| printf("remove %s, returned %d\n", |
| vreader_get_name(reader), error); |
| } else { |
| printf("no reader by id %u found\n", reader_id); |
| } |
| } else if (strncmp(string, "select", 6) == 0) { |
| if (string[6] == ' ') { |
| reader_id = get_id_from_string(&string[7], |
| VSCARD_UNDEFINED_READER_ID); |
| } |
| if (reader_id != VSCARD_UNDEFINED_READER_ID) { |
| reader = vreader_get_reader_by_id(reader_id); |
| } |
| if (reader) { |
| printf("Selecting reader %u, %s\n", reader_id, |
| vreader_get_name(reader)); |
| default_reader_id = reader_id; |
| } else { |
| printf("Reader with id %u not found\n", reader_id); |
| } |
| } else if (strncmp(string, "debug", 5) == 0) { |
| if (string[5] == ' ') { |
| verbose = get_id_from_string(&string[6], 0); |
| } |
| printf("debug level = %d\n", verbose); |
| } else if (strncmp(string, "list", 4) == 0) { |
| VReaderList *list = vreader_get_reader_list(); |
| VReaderListEntry *reader_entry; |
| printf("Active Readers:\n"); |
| for (reader_entry = vreader_list_get_first(list); reader_entry; |
| reader_entry = vreader_list_get_next(reader_entry)) { |
| VReader *reader = vreader_list_get_reader(reader_entry); |
| vreader_id_t reader_id; |
| reader_id = vreader_get_id(reader); |
| if (reader_id == -1) { |
| continue; |
| } |
| printf("%3u %s %s\n", reader_id, |
| vreader_card_is_present(reader) == VREADER_OK ? |
| "CARD_PRESENT" : " ", |
| vreader_get_name(reader)); |
| } |
| printf("Inactive Readers:\n"); |
| for (reader_entry = vreader_list_get_first(list); reader_entry; |
| reader_entry = vreader_list_get_next(reader_entry)) { |
| VReader *reader = vreader_list_get_reader(reader_entry); |
| vreader_id_t reader_id; |
| reader_id = vreader_get_id(reader); |
| if (reader_id != -1) { |
| continue; |
| } |
| |
| printf("INA %s %s\n", |
| vreader_card_is_present(reader) == VREADER_OK ? |
| "CARD_PRESENT" : " ", |
| vreader_get_name(reader)); |
| } |
| vreader_list_delete(list); |
| } else if (*string != 0) { |
| printf("valid commands:\n"); |
| printf("insert [reader_id]\n"); |
| printf("remove [reader_id]\n"); |
| printf("select reader_id\n"); |
| printf("list\n"); |
| printf("debug [level]\n"); |
| printf("exit\n"); |
| } |
| } |
| vreader_free(reader); |
| printf("> "); |
| fflush(stdout); |
| |
| return TRUE; |
| } |
| |
| |
| /* just for ease of parsing command line arguments. */ |
| #define MAX_CERTS 100 |
| |
| static int |
| connect_to_qemu( |
| const char *host, |
| const char *port |
| ) { |
| struct addrinfo hints; |
| struct addrinfo *server; |
| int ret, sock; |
| |
| sock = socket(AF_INET, SOCK_STREAM, 0); |
| if (sock < 0) { |
| /* Error */ |
| fprintf(stderr, "Error opening socket!\n"); |
| return -1; |
| } |
| |
| memset(&hints, 0, sizeof(struct addrinfo)); |
| hints.ai_family = AF_UNSPEC; |
| hints.ai_socktype = SOCK_STREAM; |
| hints.ai_flags = 0; |
| hints.ai_protocol = 0; /* Any protocol */ |
| |
| ret = getaddrinfo(host, port, &hints, &server); |
| |
| if (ret != 0) { |
| /* Error */ |
| fprintf(stderr, "getaddrinfo failed\n"); |
| goto cleanup_socket; |
| } |
| |
| if (connect(sock, server->ai_addr, server->ai_addrlen) < 0) { |
| /* Error */ |
| fprintf(stderr, "Could not connect\n"); |
| goto cleanup_socket; |
| } |
| if (verbose) { |
| printf("Connected (sizeof Header=%zd)!\n", sizeof(VSCMsgHeader)); |
| } |
| return sock; |
| |
| cleanup_socket: |
| closesocket(sock); |
| return -1; |
| } |
| |
| int |
| main( |
| int argc, |
| char *argv[] |
| ) { |
| GMainLoop *loop; |
| GIOChannel *channel_stdin; |
| char *qemu_host; |
| char *qemu_port; |
| |
| VCardEmulOptions *command_line_options = NULL; |
| |
| char *cert_names[MAX_CERTS]; |
| char *emul_args = NULL; |
| int cert_count = 0; |
| int c, sock; |
| |
| #ifdef _WIN32 |
| WSADATA Data; |
| |
| if (WSAStartup(MAKEWORD(2, 2), &Data) != 0) { |
| c = WSAGetLastError(); |
| fprintf(stderr, "WSAStartup: %d\n", c); |
| return 1; |
| } |
| #endif |
| #if !GLIB_CHECK_VERSION(2, 31, 0) |
| if (!g_thread_supported()) { |
| g_thread_init(NULL); |
| } |
| #endif |
| |
| while ((c = getopt(argc, argv, "c:e:pd:")) != -1) { |
| switch (c) { |
| case 'c': |
| if (cert_count >= MAX_CERTS) { |
| printf("too many certificates (max = %d)\n", MAX_CERTS); |
| exit(5); |
| } |
| cert_names[cert_count++] = optarg; |
| break; |
| case 'e': |
| emul_args = optarg; |
| break; |
| case 'p': |
| print_usage(); |
| exit(4); |
| break; |
| case 'd': |
| verbose = get_id_from_string(optarg, 1); |
| break; |
| } |
| } |
| |
| if (argc - optind != 2) { |
| print_usage(); |
| exit(4); |
| } |
| |
| if (cert_count > 0) { |
| char *new_args; |
| int len, i; |
| /* if we've given some -c options, we clearly we want do so some |
| * software emulation. add that emulation now. this is NSS Emulator |
| * specific */ |
| if (emul_args == NULL) { |
| emul_args = (char *)"db=\"/etc/pki/nssdb\""; |
| } |
| #define SOFT_STRING ",soft=(,Virtual Reader,CAC,," |
| /* 2 == close paren & null */ |
| len = strlen(emul_args) + strlen(SOFT_STRING) + 2; |
| for (i = 0; i < cert_count; i++) { |
| len += strlen(cert_names[i])+1; /* 1 == comma */ |
| } |
| new_args = g_malloc(len); |
| strcpy(new_args, emul_args); |
| strcat(new_args, SOFT_STRING); |
| for (i = 0; i < cert_count; i++) { |
| strcat(new_args, cert_names[i]); |
| strcat(new_args, ","); |
| } |
| strcat(new_args, ")"); |
| emul_args = new_args; |
| } |
| if (emul_args) { |
| command_line_options = vcard_emul_options(emul_args); |
| } |
| |
| qemu_host = g_strdup(argv[argc - 2]); |
| qemu_port = g_strdup(argv[argc - 1]); |
| sock = connect_to_qemu(qemu_host, qemu_port); |
| if (sock == -1) { |
| fprintf(stderr, "error opening socket, exiting.\n"); |
| exit(5); |
| } |
| |
| socket_to_send = g_byte_array_new(); |
| vcard_emul_init(command_line_options); |
| loop = g_main_loop_new(NULL, TRUE); |
| |
| printf("> "); |
| fflush(stdout); |
| |
| #ifdef _WIN32 |
| channel_stdin = g_io_channel_win32_new_fd(STDIN_FILENO); |
| #else |
| channel_stdin = g_io_channel_unix_new(STDIN_FILENO); |
| #endif |
| g_io_add_watch(channel_stdin, G_IO_IN, do_command, NULL); |
| #ifdef _WIN32 |
| channel_socket = g_io_channel_win32_new_socket(sock); |
| #else |
| channel_socket = g_io_channel_unix_new(sock); |
| #endif |
| g_io_channel_set_encoding(channel_socket, NULL, NULL); |
| /* we buffer ourself for thread safety reasons */ |
| g_io_channel_set_buffered(channel_socket, FALSE); |
| |
| /* Send init message, Host responds (and then we send reader attachments) */ |
| VSCMsgInit init = { |
| .version = htonl(VSCARD_VERSION), |
| .magic = VSCARD_MAGIC, |
| .capabilities = {0} |
| }; |
| send_msg(VSC_Init, 0, &init, sizeof(init)); |
| |
| g_main_loop_run(loop); |
| g_main_loop_unref(loop); |
| |
| g_io_channel_unref(channel_stdin); |
| g_io_channel_unref(channel_socket); |
| g_byte_array_free(socket_to_send, TRUE); |
| |
| closesocket(sock); |
| return 0; |
| } |