| /* |
| * Vhost-user filesystem virtio device |
| * |
| * Copyright 2018-2019 Red Hat, Inc. |
| * |
| * Authors: |
| * Stefan Hajnoczi <stefanha@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or |
| * (at your option) any later version. See the COPYING file in the |
| * top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include <sys/ioctl.h> |
| #include "standard-headers/linux/virtio_fs.h" |
| #include "qapi/error.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "hw/virtio/virtio-access.h" |
| #include "qemu/error-report.h" |
| #include "hw/virtio/vhost-user-fs.h" |
| #include "monitor/monitor.h" |
| #include "sysemu/sysemu.h" |
| |
| static const int user_feature_bits[] = { |
| VIRTIO_F_VERSION_1, |
| VIRTIO_RING_F_INDIRECT_DESC, |
| VIRTIO_RING_F_EVENT_IDX, |
| VIRTIO_F_NOTIFY_ON_EMPTY, |
| VIRTIO_F_RING_PACKED, |
| VIRTIO_F_IOMMU_PLATFORM, |
| |
| VHOST_INVALID_FEATURE_BIT |
| }; |
| |
| static void vuf_get_config(VirtIODevice *vdev, uint8_t *config) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| struct virtio_fs_config fscfg = {}; |
| |
| memcpy((char *)fscfg.tag, fs->conf.tag, |
| MIN(strlen(fs->conf.tag) + 1, sizeof(fscfg.tag))); |
| |
| virtio_stl_p(vdev, &fscfg.num_request_queues, fs->conf.num_request_queues); |
| |
| memcpy(config, &fscfg, sizeof(fscfg)); |
| } |
| |
| static void vuf_start(VirtIODevice *vdev) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| int ret; |
| int i; |
| |
| if (!k->set_guest_notifiers) { |
| error_report("binding does not support guest notifiers"); |
| return; |
| } |
| |
| ret = vhost_dev_enable_notifiers(&fs->vhost_dev, vdev); |
| if (ret < 0) { |
| error_report("Error enabling host notifiers: %d", -ret); |
| return; |
| } |
| |
| ret = k->set_guest_notifiers(qbus->parent, fs->vhost_dev.nvqs, true); |
| if (ret < 0) { |
| error_report("Error binding guest notifier: %d", -ret); |
| goto err_host_notifiers; |
| } |
| |
| fs->vhost_dev.acked_features = vdev->guest_features; |
| ret = vhost_dev_start(&fs->vhost_dev, vdev); |
| if (ret < 0) { |
| error_report("Error starting vhost: %d", -ret); |
| goto err_guest_notifiers; |
| } |
| |
| /* |
| * guest_notifier_mask/pending not used yet, so just unmask |
| * everything here. virtio-pci will do the right thing by |
| * enabling/disabling irqfd. |
| */ |
| for (i = 0; i < fs->vhost_dev.nvqs; i++) { |
| vhost_virtqueue_mask(&fs->vhost_dev, vdev, i, false); |
| } |
| |
| return; |
| |
| err_guest_notifiers: |
| k->set_guest_notifiers(qbus->parent, fs->vhost_dev.nvqs, false); |
| err_host_notifiers: |
| vhost_dev_disable_notifiers(&fs->vhost_dev, vdev); |
| } |
| |
| static void vuf_stop(VirtIODevice *vdev) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| int ret; |
| |
| if (!k->set_guest_notifiers) { |
| return; |
| } |
| |
| vhost_dev_stop(&fs->vhost_dev, vdev); |
| |
| ret = k->set_guest_notifiers(qbus->parent, fs->vhost_dev.nvqs, false); |
| if (ret < 0) { |
| error_report("vhost guest notifier cleanup failed: %d", ret); |
| return; |
| } |
| |
| vhost_dev_disable_notifiers(&fs->vhost_dev, vdev); |
| } |
| |
| static void vuf_set_status(VirtIODevice *vdev, uint8_t status) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| bool should_start = status & VIRTIO_CONFIG_S_DRIVER_OK; |
| |
| if (!vdev->vm_running) { |
| should_start = false; |
| } |
| |
| if (fs->vhost_dev.started == should_start) { |
| return; |
| } |
| |
| if (should_start) { |
| vuf_start(vdev); |
| } else { |
| vuf_stop(vdev); |
| } |
| } |
| |
| static uint64_t vuf_get_features(VirtIODevice *vdev, |
| uint64_t features, |
| Error **errp) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| |
| return vhost_get_features(&fs->vhost_dev, user_feature_bits, features); |
| } |
| |
| static void vuf_handle_output(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| /* |
| * Not normally called; it's the daemon that handles the queue; |
| * however virtio's cleanup path can call this. |
| */ |
| } |
| |
| static void vuf_guest_notifier_mask(VirtIODevice *vdev, int idx, |
| bool mask) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| |
| vhost_virtqueue_mask(&fs->vhost_dev, vdev, idx, mask); |
| } |
| |
| static bool vuf_guest_notifier_pending(VirtIODevice *vdev, int idx) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(vdev); |
| |
| return vhost_virtqueue_pending(&fs->vhost_dev, idx); |
| } |
| |
| static void vuf_device_realize(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserFS *fs = VHOST_USER_FS(dev); |
| unsigned int i; |
| size_t len; |
| int ret; |
| |
| if (!fs->conf.chardev.chr) { |
| error_setg(errp, "missing chardev"); |
| return; |
| } |
| |
| if (!fs->conf.tag) { |
| error_setg(errp, "missing tag property"); |
| return; |
| } |
| len = strlen(fs->conf.tag); |
| if (len == 0) { |
| error_setg(errp, "tag property cannot be empty"); |
| return; |
| } |
| if (len > sizeof_field(struct virtio_fs_config, tag)) { |
| error_setg(errp, "tag property must be %zu bytes or less", |
| sizeof_field(struct virtio_fs_config, tag)); |
| return; |
| } |
| |
| if (fs->conf.num_request_queues == 0) { |
| error_setg(errp, "num-request-queues property must be larger than 0"); |
| return; |
| } |
| |
| if (!is_power_of_2(fs->conf.queue_size)) { |
| error_setg(errp, "queue-size property must be a power of 2"); |
| return; |
| } |
| |
| if (fs->conf.queue_size > VIRTQUEUE_MAX_SIZE) { |
| error_setg(errp, "queue-size property must be %u or smaller", |
| VIRTQUEUE_MAX_SIZE); |
| return; |
| } |
| |
| if (!vhost_user_init(&fs->vhost_user, &fs->conf.chardev, errp)) { |
| return; |
| } |
| |
| virtio_init(vdev, "vhost-user-fs", VIRTIO_ID_FS, |
| sizeof(struct virtio_fs_config)); |
| |
| /* Hiprio queue */ |
| fs->hiprio_vq = virtio_add_queue(vdev, fs->conf.queue_size, vuf_handle_output); |
| |
| /* Request queues */ |
| fs->req_vqs = g_new(VirtQueue *, fs->conf.num_request_queues); |
| for (i = 0; i < fs->conf.num_request_queues; i++) { |
| fs->req_vqs[i] = virtio_add_queue(vdev, fs->conf.queue_size, vuf_handle_output); |
| } |
| |
| /* 1 high prio queue, plus the number configured */ |
| fs->vhost_dev.nvqs = 1 + fs->conf.num_request_queues; |
| fs->vhost_dev.vqs = g_new0(struct vhost_virtqueue, fs->vhost_dev.nvqs); |
| ret = vhost_dev_init(&fs->vhost_dev, &fs->vhost_user, |
| VHOST_BACKEND_TYPE_USER, 0, errp); |
| if (ret < 0) { |
| goto err_virtio; |
| } |
| |
| return; |
| |
| err_virtio: |
| vhost_user_cleanup(&fs->vhost_user); |
| virtio_delete_queue(fs->hiprio_vq); |
| for (i = 0; i < fs->conf.num_request_queues; i++) { |
| virtio_delete_queue(fs->req_vqs[i]); |
| } |
| g_free(fs->req_vqs); |
| virtio_cleanup(vdev); |
| g_free(fs->vhost_dev.vqs); |
| return; |
| } |
| |
| static void vuf_device_unrealize(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserFS *fs = VHOST_USER_FS(dev); |
| int i; |
| |
| /* This will stop vhost backend if appropriate. */ |
| vuf_set_status(vdev, 0); |
| |
| vhost_dev_cleanup(&fs->vhost_dev); |
| |
| vhost_user_cleanup(&fs->vhost_user); |
| |
| virtio_delete_queue(fs->hiprio_vq); |
| for (i = 0; i < fs->conf.num_request_queues; i++) { |
| virtio_delete_queue(fs->req_vqs[i]); |
| } |
| g_free(fs->req_vqs); |
| virtio_cleanup(vdev); |
| g_free(fs->vhost_dev.vqs); |
| fs->vhost_dev.vqs = NULL; |
| } |
| |
| static const VMStateDescription vuf_vmstate = { |
| .name = "vhost-user-fs", |
| .unmigratable = 1, |
| }; |
| |
| static Property vuf_properties[] = { |
| DEFINE_PROP_CHR("chardev", VHostUserFS, conf.chardev), |
| DEFINE_PROP_STRING("tag", VHostUserFS, conf.tag), |
| DEFINE_PROP_UINT16("num-request-queues", VHostUserFS, |
| conf.num_request_queues, 1), |
| DEFINE_PROP_UINT16("queue-size", VHostUserFS, conf.queue_size, 128), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void vuf_instance_init(Object *obj) |
| { |
| VHostUserFS *fs = VHOST_USER_FS(obj); |
| |
| device_add_bootindex_property(obj, &fs->bootindex, "bootindex", |
| "/filesystem@0", DEVICE(obj)); |
| } |
| |
| static void vuf_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| |
| device_class_set_props(dc, vuf_properties); |
| dc->vmsd = &vuf_vmstate; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| vdc->realize = vuf_device_realize; |
| vdc->unrealize = vuf_device_unrealize; |
| vdc->get_features = vuf_get_features; |
| vdc->get_config = vuf_get_config; |
| vdc->set_status = vuf_set_status; |
| vdc->guest_notifier_mask = vuf_guest_notifier_mask; |
| vdc->guest_notifier_pending = vuf_guest_notifier_pending; |
| } |
| |
| static const TypeInfo vuf_info = { |
| .name = TYPE_VHOST_USER_FS, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VHostUserFS), |
| .instance_init = vuf_instance_init, |
| .class_init = vuf_class_init, |
| }; |
| |
| static void vuf_register_types(void) |
| { |
| type_register_static(&vuf_info); |
| } |
| |
| type_init(vuf_register_types) |