| /* |
| * vfio based device assignment support - PCI devices |
| * |
| * Copyright Red Hat, Inc. 2012-2015 |
| * |
| * Authors: |
| * Alex Williamson <alex.williamson@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| */ |
| #ifndef HW_VFIO_VFIO_PCI_H |
| #define HW_VFIO_VFIO_PCI_H |
| |
| #include "exec/memory.h" |
| #include "hw/pci/pci.h" |
| #include "hw/vfio/vfio-common.h" |
| #include "qemu/event_notifier.h" |
| #include "qemu/queue.h" |
| #include "qemu/timer.h" |
| #include "qom/object.h" |
| |
| #define PCI_ANY_ID (~0) |
| |
| struct VFIOPCIDevice; |
| |
| typedef struct VFIOIOEventFD { |
| QLIST_ENTRY(VFIOIOEventFD) next; |
| MemoryRegion *mr; |
| hwaddr addr; |
| unsigned size; |
| uint64_t data; |
| EventNotifier e; |
| VFIORegion *region; |
| hwaddr region_addr; |
| bool dynamic; /* Added runtime, removed on device reset */ |
| bool vfio; |
| } VFIOIOEventFD; |
| |
| typedef struct VFIOQuirk { |
| QLIST_ENTRY(VFIOQuirk) next; |
| void *data; |
| QLIST_HEAD(, VFIOIOEventFD) ioeventfds; |
| int nr_mem; |
| MemoryRegion *mem; |
| void (*reset)(struct VFIOPCIDevice *vdev, struct VFIOQuirk *quirk); |
| } VFIOQuirk; |
| |
| typedef struct VFIOBAR { |
| VFIORegion region; |
| MemoryRegion *mr; |
| size_t size; |
| uint8_t type; |
| bool ioport; |
| bool mem64; |
| QLIST_HEAD(, VFIOQuirk) quirks; |
| } VFIOBAR; |
| |
| typedef struct VFIOVGARegion { |
| MemoryRegion mem; |
| off_t offset; |
| int nr; |
| QLIST_HEAD(, VFIOQuirk) quirks; |
| } VFIOVGARegion; |
| |
| typedef struct VFIOVGA { |
| off_t fd_offset; |
| int fd; |
| VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS]; |
| } VFIOVGA; |
| |
| typedef struct VFIOINTx { |
| bool pending; /* interrupt pending */ |
| bool kvm_accel; /* set when QEMU bypass through KVM enabled */ |
| uint8_t pin; /* which pin to pull for qemu_set_irq */ |
| EventNotifier interrupt; /* eventfd triggered on interrupt */ |
| EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ |
| PCIINTxRoute route; /* routing info for QEMU bypass */ |
| uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */ |
| QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */ |
| } VFIOINTx; |
| |
| typedef struct VFIOMSIVector { |
| /* |
| * Two interrupt paths are configured per vector. The first, is only used |
| * for interrupts injected via QEMU. This is typically the non-accel path, |
| * but may also be used when we want QEMU to handle masking and pending |
| * bits. The KVM path bypasses QEMU and is therefore higher performance, |
| * but requires masking at the device. virq is used to track the MSI route |
| * through KVM, thus kvm_interrupt is only available when virq is set to a |
| * valid (>= 0) value. |
| */ |
| EventNotifier interrupt; |
| EventNotifier kvm_interrupt; |
| struct VFIOPCIDevice *vdev; /* back pointer to device */ |
| int virq; |
| bool use; |
| } VFIOMSIVector; |
| |
| enum { |
| VFIO_INT_NONE = 0, |
| VFIO_INT_INTx = 1, |
| VFIO_INT_MSI = 2, |
| VFIO_INT_MSIX = 3, |
| }; |
| |
| /* Cache of MSI-X setup */ |
| typedef struct VFIOMSIXInfo { |
| uint8_t table_bar; |
| uint8_t pba_bar; |
| uint16_t entries; |
| uint32_t table_offset; |
| uint32_t pba_offset; |
| unsigned long *pending; |
| } VFIOMSIXInfo; |
| |
| #define TYPE_VFIO_PCI "vfio-pci" |
| OBJECT_DECLARE_SIMPLE_TYPE(VFIOPCIDevice, VFIO_PCI) |
| |
| struct VFIOPCIDevice { |
| PCIDevice pdev; |
| VFIODevice vbasedev; |
| VFIOINTx intx; |
| unsigned int config_size; |
| uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */ |
| off_t config_offset; /* Offset of config space region within device fd */ |
| unsigned int rom_size; |
| off_t rom_offset; /* Offset of ROM region within device fd */ |
| void *rom; |
| int msi_cap_size; |
| VFIOMSIVector *msi_vectors; |
| VFIOMSIXInfo *msix; |
| int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ |
| int interrupt; /* Current interrupt type */ |
| VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ |
| VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */ |
| void *igd_opregion; |
| PCIHostDeviceAddress host; |
| EventNotifier err_notifier; |
| EventNotifier req_notifier; |
| int (*resetfn)(struct VFIOPCIDevice *); |
| uint32_t vendor_id; |
| uint32_t device_id; |
| uint32_t sub_vendor_id; |
| uint32_t sub_device_id; |
| uint32_t features; |
| #define VFIO_FEATURE_ENABLE_VGA_BIT 0 |
| #define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT) |
| #define VFIO_FEATURE_ENABLE_REQ_BIT 1 |
| #define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT) |
| #define VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT 2 |
| #define VFIO_FEATURE_ENABLE_IGD_OPREGION \ |
| (1 << VFIO_FEATURE_ENABLE_IGD_OPREGION_BIT) |
| OnOffAuto display; |
| uint32_t display_xres; |
| uint32_t display_yres; |
| int32_t bootindex; |
| uint32_t igd_gms; |
| OffAutoPCIBAR msix_relo; |
| uint8_t pm_cap; |
| uint8_t nv_gpudirect_clique; |
| bool pci_aer; |
| bool req_enabled; |
| bool has_flr; |
| bool has_pm_reset; |
| bool rom_read_failed; |
| bool no_kvm_intx; |
| bool no_kvm_msi; |
| bool no_kvm_msix; |
| bool no_geforce_quirks; |
| bool no_kvm_ioeventfd; |
| bool no_vfio_ioeventfd; |
| bool enable_ramfb; |
| VFIODisplay *dpy; |
| Notifier irqchip_change_notifier; |
| }; |
| |
| /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */ |
| static inline bool vfio_pci_is(VFIOPCIDevice *vdev, uint32_t vendor, uint32_t device) |
| { |
| return (vendor == PCI_ANY_ID || vendor == vdev->vendor_id) && |
| (device == PCI_ANY_ID || device == vdev->device_id); |
| } |
| |
| static inline bool vfio_is_vga(VFIOPCIDevice *vdev) |
| { |
| PCIDevice *pdev = &vdev->pdev; |
| uint16_t class = pci_get_word(pdev->config + PCI_CLASS_DEVICE); |
| |
| return class == PCI_CLASS_DISPLAY_VGA; |
| } |
| |
| uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len); |
| void vfio_pci_write_config(PCIDevice *pdev, |
| uint32_t addr, uint32_t val, int len); |
| |
| uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size); |
| void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size); |
| |
| bool vfio_opt_rom_in_denylist(VFIOPCIDevice *vdev); |
| void vfio_vga_quirk_setup(VFIOPCIDevice *vdev); |
| void vfio_vga_quirk_exit(VFIOPCIDevice *vdev); |
| void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev); |
| void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr); |
| void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr); |
| void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr); |
| void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev); |
| int vfio_add_virt_caps(VFIOPCIDevice *vdev, Error **errp); |
| void vfio_quirk_reset(VFIOPCIDevice *vdev); |
| VFIOQuirk *vfio_quirk_alloc(int nr_mem); |
| void vfio_probe_igd_bar4_quirk(VFIOPCIDevice *vdev, int nr); |
| |
| extern const PropertyInfo qdev_prop_nv_gpudirect_clique; |
| |
| int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp); |
| |
| int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev, |
| struct vfio_region_info *info, |
| Error **errp); |
| int vfio_pci_nvidia_v100_ram_init(VFIOPCIDevice *vdev, Error **errp); |
| int vfio_pci_nvlink2_init(VFIOPCIDevice *vdev, Error **errp); |
| |
| void vfio_display_reset(VFIOPCIDevice *vdev); |
| int vfio_display_probe(VFIOPCIDevice *vdev, Error **errp); |
| void vfio_display_finalize(VFIOPCIDevice *vdev); |
| |
| #endif /* HW_VFIO_VFIO_PCI_H */ |