migration: move buffered_file.c code into migration.c
This only moves the code (also from buffered_file.h to migration.h).
Fix whitespace until checkpatch is happy.
Signed-off-by: Juan Quintela <quintela@redhat.com>
diff --git a/migration.c b/migration.c
index b6374ae..2937c87 100644
--- a/migration.c
+++ b/migration.c
@@ -16,7 +16,7 @@
#include "qemu-common.h"
#include "migration/migration.h"
#include "monitor/monitor.h"
-#include "buffered_file.h"
+#include "migration/qemu-file.h"
#include "sysemu/sysemu.h"
#include "block/block.h"
#include "qemu/sockets.h"
@@ -587,3 +587,234 @@
return s->xbzrle_cache_size;
}
+
+/* migration thread support */
+
+typedef struct QEMUFileBuffered {
+ MigrationState *migration_state;
+ QEMUFile *file;
+ size_t bytes_xfer;
+ size_t xfer_limit;
+ uint8_t *buffer;
+ size_t buffer_size;
+ size_t buffer_capacity;
+ QemuThread thread;
+} QEMUFileBuffered;
+
+static ssize_t buffered_flush(QEMUFileBuffered *s)
+{
+ size_t offset = 0;
+ ssize_t ret = 0;
+
+ DPRINTF("flushing %zu byte(s) of data\n", s->buffer_size);
+
+ while (s->bytes_xfer < s->xfer_limit && offset < s->buffer_size) {
+ size_t to_send = MIN(s->buffer_size - offset, s->xfer_limit - s->bytes_xfer);
+ ret = migrate_fd_put_buffer(s->migration_state, s->buffer + offset,
+ to_send);
+ if (ret <= 0) {
+ DPRINTF("error flushing data, %zd\n", ret);
+ break;
+ } else {
+ DPRINTF("flushed %zd byte(s)\n", ret);
+ offset += ret;
+ s->bytes_xfer += ret;
+ }
+ }
+
+ DPRINTF("flushed %zu of %zu byte(s)\n", offset, s->buffer_size);
+ memmove(s->buffer, s->buffer + offset, s->buffer_size - offset);
+ s->buffer_size -= offset;
+
+ if (ret < 0) {
+ return ret;
+ }
+ return offset;
+}
+
+static int buffered_put_buffer(void *opaque, const uint8_t *buf,
+ int64_t pos, int size)
+{
+ QEMUFileBuffered *s = opaque;
+ ssize_t error;
+
+ DPRINTF("putting %d bytes at %" PRId64 "\n", size, pos);
+
+ error = qemu_file_get_error(s->file);
+ if (error) {
+ DPRINTF("flush when error, bailing: %s\n", strerror(-error));
+ return error;
+ }
+
+ if (size <= 0) {
+ return size;
+ }
+
+ if (size > (s->buffer_capacity - s->buffer_size)) {
+ DPRINTF("increasing buffer capacity from %zu by %zu\n",
+ s->buffer_capacity, size + 1024);
+
+ s->buffer_capacity += size + 1024;
+
+ s->buffer = g_realloc(s->buffer, s->buffer_capacity);
+ }
+
+ memcpy(s->buffer + s->buffer_size, buf, size);
+ s->buffer_size += size;
+
+ return size;
+}
+
+static int buffered_close(void *opaque)
+{
+ QEMUFileBuffered *s = opaque;
+ ssize_t ret = 0;
+ int ret2;
+
+ DPRINTF("closing\n");
+
+ s->xfer_limit = INT_MAX;
+ while (!qemu_file_get_error(s->file) && s->buffer_size) {
+ ret = buffered_flush(s);
+ if (ret < 0) {
+ break;
+ }
+ }
+
+ ret2 = migrate_fd_close(s->migration_state);
+ if (ret >= 0) {
+ ret = ret2;
+ }
+ ret = migrate_fd_close(s->migration_state);
+ s->migration_state->complete = true;
+ return ret;
+}
+
+static int buffered_get_fd(void *opaque)
+{
+ QEMUFileBuffered *s = opaque;
+
+ return qemu_get_fd(s->file);
+}
+
+/*
+ * The meaning of the return values is:
+ * 0: We can continue sending
+ * 1: Time to stop
+ * negative: There has been an error
+ */
+static int buffered_rate_limit(void *opaque)
+{
+ QEMUFileBuffered *s = opaque;
+ int ret;
+
+ ret = qemu_file_get_error(s->file);
+ if (ret) {
+ return ret;
+ }
+
+ if (s->bytes_xfer > s->xfer_limit) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static int64_t buffered_set_rate_limit(void *opaque, int64_t new_rate)
+{
+ QEMUFileBuffered *s = opaque;
+ if (qemu_file_get_error(s->file)) {
+ goto out;
+ }
+ if (new_rate > SIZE_MAX) {
+ new_rate = SIZE_MAX;
+ }
+
+ s->xfer_limit = new_rate / 10;
+
+out:
+ return s->xfer_limit;
+}
+
+static int64_t buffered_get_rate_limit(void *opaque)
+{
+ QEMUFileBuffered *s = opaque;
+
+ return s->xfer_limit;
+}
+
+/* 100ms xfer_limit is the limit that we should write each 100ms */
+#define BUFFER_DELAY 100
+
+static void *buffered_file_thread(void *opaque)
+{
+ QEMUFileBuffered *s = opaque;
+ int64_t initial_time = qemu_get_clock_ms(rt_clock);
+ int64_t max_size = 0;
+ bool last_round = false;
+
+ while (true) {
+ int64_t current_time = qemu_get_clock_ms(rt_clock);
+
+ if (s->migration_state->complete) {
+ break;
+ }
+ if (current_time >= initial_time + BUFFER_DELAY) {
+ uint64_t transferred_bytes = s->bytes_xfer;
+ uint64_t time_spent = current_time - initial_time;
+ double bandwidth = transferred_bytes / time_spent;
+ max_size = bandwidth * migrate_max_downtime() / 1000000;
+
+ DPRINTF("transferred %" PRIu64 " time_spent %" PRIu64
+ " bandwidth %g max_size %" PRId64 "\n",
+ transferred_bytes, time_spent, bandwidth, max_size);
+
+ s->bytes_xfer = 0;
+ initial_time = current_time;
+ }
+ if (!last_round && (s->bytes_xfer >= s->xfer_limit)) {
+ /* usleep expects microseconds */
+ g_usleep((initial_time + BUFFER_DELAY - current_time)*1000);
+ }
+ if (buffered_flush(s) < 0) {
+ break;
+ }
+
+ DPRINTF("file is ready\n");
+ if (s->bytes_xfer < s->xfer_limit) {
+ DPRINTF("notifying client\n");
+ last_round = migrate_fd_put_ready(s->migration_state, max_size);
+ }
+ }
+
+ g_free(s->buffer);
+ g_free(s);
+ return NULL;
+}
+
+static const QEMUFileOps buffered_file_ops = {
+ .get_fd = buffered_get_fd,
+ .put_buffer = buffered_put_buffer,
+ .close = buffered_close,
+ .rate_limit = buffered_rate_limit,
+ .get_rate_limit = buffered_get_rate_limit,
+ .set_rate_limit = buffered_set_rate_limit,
+};
+
+void qemu_fopen_ops_buffered(MigrationState *migration_state)
+{
+ QEMUFileBuffered *s;
+
+ s = g_malloc0(sizeof(*s));
+
+ s->migration_state = migration_state;
+ s->xfer_limit = migration_state->bandwidth_limit / 10;
+ s->migration_state->complete = false;
+
+ s->file = qemu_fopen_ops(s, &buffered_file_ops);
+
+ migration_state->file = s->file;
+
+ qemu_thread_create(&s->thread, buffered_file_thread, s,
+ QEMU_THREAD_DETACHED);
+}
