| /* |
| * QEMU Machine |
| * |
| * Copyright (C) 2014 Red Hat Inc |
| * |
| * Authors: |
| * Marcel Apfelbaum <marcel.a@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/accel.h" |
| #include "sysemu/replay.h" |
| #include "hw/boards.h" |
| #include "hw/loader.h" |
| #include "qapi/error.h" |
| #include "qapi/qapi-visit-machine.h" |
| #include "qemu/madvise.h" |
| #include "qom/object_interfaces.h" |
| #include "sysemu/cpus.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/reset.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/xen.h" |
| #include "sysemu/qtest.h" |
| #include "hw/pci/pci_bridge.h" |
| #include "hw/mem/nvdimm.h" |
| #include "migration/global_state.h" |
| #include "exec/confidential-guest-support.h" |
| #include "hw/virtio/virtio-pci.h" |
| #include "hw/virtio/virtio-net.h" |
| #include "hw/virtio/virtio-iommu.h" |
| #include "audio/audio.h" |
| |
| GlobalProperty hw_compat_9_0[] = { |
| {"arm-cpu", "backcompat-cntfrq", "true" }, |
| {"scsi-disk-base", "migrate-emulated-scsi-request", "false" }, |
| {"vfio-pci", "skip-vsc-check", "false" }, |
| { "virtio-pci", "x-pcie-pm-no-soft-reset", "off" }, |
| {"sd-card", "spec_version", "2" }, |
| }; |
| const size_t hw_compat_9_0_len = G_N_ELEMENTS(hw_compat_9_0); |
| |
| GlobalProperty hw_compat_8_2[] = { |
| { "migration", "zero-page-detection", "legacy"}, |
| { TYPE_VIRTIO_IOMMU_PCI, "granule", "4k" }, |
| { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "64" }, |
| { "virtio-gpu-device", "x-scanout-vmstate-version", "1" }, |
| }; |
| const size_t hw_compat_8_2_len = G_N_ELEMENTS(hw_compat_8_2); |
| |
| GlobalProperty hw_compat_8_1[] = { |
| { TYPE_PCI_BRIDGE, "x-pci-express-writeable-slt-bug", "true" }, |
| { "ramfb", "x-migrate", "off" }, |
| { "vfio-pci-nohotplug", "x-ramfb-migrate", "off" }, |
| { "igb", "x-pcie-flr-init", "off" }, |
| { TYPE_VIRTIO_NET, "host_uso", "off"}, |
| { TYPE_VIRTIO_NET, "guest_uso4", "off"}, |
| { TYPE_VIRTIO_NET, "guest_uso6", "off"}, |
| }; |
| const size_t hw_compat_8_1_len = G_N_ELEMENTS(hw_compat_8_1); |
| |
| GlobalProperty hw_compat_8_0[] = { |
| { "migration", "multifd-flush-after-each-section", "on"}, |
| { TYPE_PCI_DEVICE, "x-pcie-ari-nextfn-1", "on" }, |
| }; |
| const size_t hw_compat_8_0_len = G_N_ELEMENTS(hw_compat_8_0); |
| |
| GlobalProperty hw_compat_7_2[] = { |
| { "e1000e", "migrate-timadj", "off" }, |
| { "virtio-mem", "x-early-migration", "false" }, |
| { "migration", "x-preempt-pre-7-2", "true" }, |
| { TYPE_PCI_DEVICE, "x-pcie-err-unc-mask", "off" }, |
| }; |
| const size_t hw_compat_7_2_len = G_N_ELEMENTS(hw_compat_7_2); |
| |
| GlobalProperty hw_compat_7_1[] = { |
| { "virtio-device", "queue_reset", "false" }, |
| { "virtio-rng-pci", "vectors", "0" }, |
| { "virtio-rng-pci-transitional", "vectors", "0" }, |
| { "virtio-rng-pci-non-transitional", "vectors", "0" }, |
| }; |
| const size_t hw_compat_7_1_len = G_N_ELEMENTS(hw_compat_7_1); |
| |
| GlobalProperty hw_compat_7_0[] = { |
| { "arm-gicv3-common", "force-8-bit-prio", "on" }, |
| { "nvme-ns", "eui64-default", "on"}, |
| }; |
| const size_t hw_compat_7_0_len = G_N_ELEMENTS(hw_compat_7_0); |
| |
| GlobalProperty hw_compat_6_2[] = { |
| { "PIIX4_PM", "x-not-migrate-acpi-index", "on"}, |
| }; |
| const size_t hw_compat_6_2_len = G_N_ELEMENTS(hw_compat_6_2); |
| |
| GlobalProperty hw_compat_6_1[] = { |
| { "vhost-user-vsock-device", "seqpacket", "off" }, |
| { "nvme-ns", "shared", "off" }, |
| }; |
| const size_t hw_compat_6_1_len = G_N_ELEMENTS(hw_compat_6_1); |
| |
| GlobalProperty hw_compat_6_0[] = { |
| { "gpex-pcihost", "allow-unmapped-accesses", "false" }, |
| { "i8042", "extended-state", "false"}, |
| { "nvme-ns", "eui64-default", "off"}, |
| { "e1000", "init-vet", "off" }, |
| { "e1000e", "init-vet", "off" }, |
| { "vhost-vsock-device", "seqpacket", "off" }, |
| }; |
| const size_t hw_compat_6_0_len = G_N_ELEMENTS(hw_compat_6_0); |
| |
| GlobalProperty hw_compat_5_2[] = { |
| { "ICH9-LPC", "smm-compat", "on"}, |
| { "PIIX4_PM", "smm-compat", "on"}, |
| { "virtio-blk-device", "report-discard-granularity", "off" }, |
| { "virtio-net-pci-base", "vectors", "3"}, |
| { "nvme", "msix-exclusive-bar", "on"}, |
| }; |
| const size_t hw_compat_5_2_len = G_N_ELEMENTS(hw_compat_5_2); |
| |
| GlobalProperty hw_compat_5_1[] = { |
| { "vhost-scsi", "num_queues", "1"}, |
| { "vhost-user-blk", "num-queues", "1"}, |
| { "vhost-user-scsi", "num_queues", "1"}, |
| { "virtio-blk-device", "num-queues", "1"}, |
| { "virtio-scsi-device", "num_queues", "1"}, |
| { "nvme", "use-intel-id", "on"}, |
| { "pvpanic", "events", "1"}, /* PVPANIC_PANICKED */ |
| { "pl011", "migrate-clk", "off" }, |
| { "virtio-pci", "x-ats-page-aligned", "off"}, |
| }; |
| const size_t hw_compat_5_1_len = G_N_ELEMENTS(hw_compat_5_1); |
| |
| GlobalProperty hw_compat_5_0[] = { |
| { "pci-host-bridge", "x-config-reg-migration-enabled", "off" }, |
| { "virtio-balloon-device", "page-poison", "false" }, |
| { "vmport", "x-read-set-eax", "off" }, |
| { "vmport", "x-signal-unsupported-cmd", "off" }, |
| { "vmport", "x-report-vmx-type", "off" }, |
| { "vmport", "x-cmds-v2", "off" }, |
| { "virtio-device", "x-disable-legacy-check", "true" }, |
| }; |
| const size_t hw_compat_5_0_len = G_N_ELEMENTS(hw_compat_5_0); |
| |
| GlobalProperty hw_compat_4_2[] = { |
| { "virtio-blk-device", "queue-size", "128"}, |
| { "virtio-scsi-device", "virtqueue_size", "128"}, |
| { "virtio-blk-device", "x-enable-wce-if-config-wce", "off" }, |
| { "virtio-blk-device", "seg-max-adjust", "off"}, |
| { "virtio-scsi-device", "seg_max_adjust", "off"}, |
| { "vhost-blk-device", "seg_max_adjust", "off"}, |
| { "usb-host", "suppress-remote-wake", "off" }, |
| { "usb-redir", "suppress-remote-wake", "off" }, |
| { "qxl", "revision", "4" }, |
| { "qxl-vga", "revision", "4" }, |
| { "fw_cfg", "acpi-mr-restore", "false" }, |
| { "virtio-device", "use-disabled-flag", "false" }, |
| }; |
| const size_t hw_compat_4_2_len = G_N_ELEMENTS(hw_compat_4_2); |
| |
| GlobalProperty hw_compat_4_1[] = { |
| { "virtio-pci", "x-pcie-flr-init", "off" }, |
| }; |
| const size_t hw_compat_4_1_len = G_N_ELEMENTS(hw_compat_4_1); |
| |
| GlobalProperty hw_compat_4_0[] = { |
| { "VGA", "edid", "false" }, |
| { "secondary-vga", "edid", "false" }, |
| { "bochs-display", "edid", "false" }, |
| { "virtio-vga", "edid", "false" }, |
| { "virtio-gpu-device", "edid", "false" }, |
| { "virtio-device", "use-started", "false" }, |
| { "virtio-balloon-device", "qemu-4-0-config-size", "true" }, |
| { "pl031", "migrate-tick-offset", "false" }, |
| }; |
| const size_t hw_compat_4_0_len = G_N_ELEMENTS(hw_compat_4_0); |
| |
| GlobalProperty hw_compat_3_1[] = { |
| { "pcie-root-port", "x-speed", "2_5" }, |
| { "pcie-root-port", "x-width", "1" }, |
| { "memory-backend-file", "x-use-canonical-path-for-ramblock-id", "true" }, |
| { "memory-backend-memfd", "x-use-canonical-path-for-ramblock-id", "true" }, |
| { "tpm-crb", "ppi", "false" }, |
| { "tpm-tis", "ppi", "false" }, |
| { "usb-kbd", "serial", "42" }, |
| { "usb-mouse", "serial", "42" }, |
| { "usb-tablet", "serial", "42" }, |
| { "virtio-blk-device", "discard", "false" }, |
| { "virtio-blk-device", "write-zeroes", "false" }, |
| { "virtio-balloon-device", "qemu-4-0-config-size", "false" }, |
| { "pcie-root-port-base", "disable-acs", "true" }, /* Added in 4.1 */ |
| }; |
| const size_t hw_compat_3_1_len = G_N_ELEMENTS(hw_compat_3_1); |
| |
| GlobalProperty hw_compat_3_0[] = {}; |
| const size_t hw_compat_3_0_len = G_N_ELEMENTS(hw_compat_3_0); |
| |
| GlobalProperty hw_compat_2_12[] = { |
| { "hda-audio", "use-timer", "false" }, |
| { "cirrus-vga", "global-vmstate", "true" }, |
| { "VGA", "global-vmstate", "true" }, |
| { "vmware-svga", "global-vmstate", "true" }, |
| { "qxl-vga", "global-vmstate", "true" }, |
| }; |
| const size_t hw_compat_2_12_len = G_N_ELEMENTS(hw_compat_2_12); |
| |
| GlobalProperty hw_compat_2_11[] = { |
| { "hpet", "hpet-offset-saved", "false" }, |
| { "virtio-blk-pci", "vectors", "2" }, |
| { "vhost-user-blk-pci", "vectors", "2" }, |
| { "e1000", "migrate_tso_props", "off" }, |
| }; |
| const size_t hw_compat_2_11_len = G_N_ELEMENTS(hw_compat_2_11); |
| |
| GlobalProperty hw_compat_2_10[] = { |
| { "virtio-mouse-device", "wheel-axis", "false" }, |
| { "virtio-tablet-device", "wheel-axis", "false" }, |
| }; |
| const size_t hw_compat_2_10_len = G_N_ELEMENTS(hw_compat_2_10); |
| |
| GlobalProperty hw_compat_2_9[] = { |
| { "pci-bridge", "shpc", "off" }, |
| { "intel-iommu", "pt", "off" }, |
| { "virtio-net-device", "x-mtu-bypass-backend", "off" }, |
| { "pcie-root-port", "x-migrate-msix", "false" }, |
| }; |
| const size_t hw_compat_2_9_len = G_N_ELEMENTS(hw_compat_2_9); |
| |
| GlobalProperty hw_compat_2_8[] = { |
| { "fw_cfg_mem", "x-file-slots", "0x10" }, |
| { "fw_cfg_io", "x-file-slots", "0x10" }, |
| { "pflash_cfi01", "old-multiple-chip-handling", "on" }, |
| { "pci-bridge", "shpc", "on" }, |
| { TYPE_PCI_DEVICE, "x-pcie-extcap-init", "off" }, |
| { "virtio-pci", "x-pcie-deverr-init", "off" }, |
| { "virtio-pci", "x-pcie-lnkctl-init", "off" }, |
| { "virtio-pci", "x-pcie-pm-init", "off" }, |
| { "cirrus-vga", "vgamem_mb", "8" }, |
| { "isa-cirrus-vga", "vgamem_mb", "8" }, |
| }; |
| const size_t hw_compat_2_8_len = G_N_ELEMENTS(hw_compat_2_8); |
| |
| GlobalProperty hw_compat_2_7[] = { |
| { "virtio-pci", "page-per-vq", "on" }, |
| { "virtio-serial-device", "emergency-write", "off" }, |
| { "ioapic", "version", "0x11" }, |
| { "intel-iommu", "x-buggy-eim", "true" }, |
| { "virtio-pci", "x-ignore-backend-features", "on" }, |
| }; |
| const size_t hw_compat_2_7_len = G_N_ELEMENTS(hw_compat_2_7); |
| |
| GlobalProperty hw_compat_2_6[] = { |
| { "virtio-mmio", "format_transport_address", "off" }, |
| /* Optional because not all virtio-pci devices support legacy mode */ |
| { "virtio-pci", "disable-modern", "on", .optional = true }, |
| { "virtio-pci", "disable-legacy", "off", .optional = true }, |
| }; |
| const size_t hw_compat_2_6_len = G_N_ELEMENTS(hw_compat_2_6); |
| |
| GlobalProperty hw_compat_2_5[] = { |
| { "isa-fdc", "fallback", "144" }, |
| { "pvscsi", "x-old-pci-configuration", "on" }, |
| { "pvscsi", "x-disable-pcie", "on" }, |
| { "vmxnet3", "x-old-msi-offsets", "on" }, |
| { "vmxnet3", "x-disable-pcie", "on" }, |
| }; |
| const size_t hw_compat_2_5_len = G_N_ELEMENTS(hw_compat_2_5); |
| |
| GlobalProperty hw_compat_2_4[] = { |
| { "e1000", "extra_mac_registers", "off" }, |
| { "virtio-pci", "x-disable-pcie", "on" }, |
| { "virtio-pci", "migrate-extra", "off" }, |
| { "fw_cfg_mem", "dma_enabled", "off" }, |
| { "fw_cfg_io", "dma_enabled", "off" } |
| }; |
| const size_t hw_compat_2_4_len = G_N_ELEMENTS(hw_compat_2_4); |
| |
| GlobalProperty hw_compat_2_3[] = { |
| { "virtio-blk-pci", "any_layout", "off" }, |
| { "virtio-balloon-pci", "any_layout", "off" }, |
| { "virtio-serial-pci", "any_layout", "off" }, |
| { "virtio-9p-pci", "any_layout", "off" }, |
| { "virtio-rng-pci", "any_layout", "off" }, |
| { TYPE_PCI_DEVICE, "x-pcie-lnksta-dllla", "off" }, |
| { "migration", "send-configuration", "off" }, |
| { "migration", "send-section-footer", "off" }, |
| { "migration", "store-global-state", "off" }, |
| }; |
| const size_t hw_compat_2_3_len = G_N_ELEMENTS(hw_compat_2_3); |
| |
| GlobalProperty hw_compat_2_2[] = {}; |
| const size_t hw_compat_2_2_len = G_N_ELEMENTS(hw_compat_2_2); |
| |
| GlobalProperty hw_compat_2_1[] = { |
| { "intel-hda", "old_msi_addr", "on" }, |
| { "VGA", "qemu-extended-regs", "off" }, |
| { "secondary-vga", "qemu-extended-regs", "off" }, |
| { "virtio-scsi-pci", "any_layout", "off" }, |
| { "usb-mouse", "usb_version", "1" }, |
| { "usb-kbd", "usb_version", "1" }, |
| { "virtio-pci", "virtio-pci-bus-master-bug-migration", "on" }, |
| }; |
| const size_t hw_compat_2_1_len = G_N_ELEMENTS(hw_compat_2_1); |
| |
| MachineState *current_machine; |
| |
| static char *machine_get_kernel(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->kernel_filename); |
| } |
| |
| static void machine_set_kernel(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->kernel_filename); |
| ms->kernel_filename = g_strdup(value); |
| } |
| |
| static char *machine_get_initrd(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->initrd_filename); |
| } |
| |
| static void machine_set_initrd(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->initrd_filename); |
| ms->initrd_filename = g_strdup(value); |
| } |
| |
| static char *machine_get_append(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->kernel_cmdline); |
| } |
| |
| static void machine_set_append(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->kernel_cmdline); |
| ms->kernel_cmdline = g_strdup(value); |
| } |
| |
| static char *machine_get_dtb(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->dtb); |
| } |
| |
| static void machine_set_dtb(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->dtb); |
| ms->dtb = g_strdup(value); |
| } |
| |
| static char *machine_get_dumpdtb(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->dumpdtb); |
| } |
| |
| static void machine_set_dumpdtb(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->dumpdtb); |
| ms->dumpdtb = g_strdup(value); |
| } |
| |
| static void machine_get_phandle_start(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| int64_t value = ms->phandle_start; |
| |
| visit_type_int(v, name, &value, errp); |
| } |
| |
| static void machine_set_phandle_start(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| int64_t value; |
| |
| if (!visit_type_int(v, name, &value, errp)) { |
| return; |
| } |
| |
| ms->phandle_start = value; |
| } |
| |
| static char *machine_get_dt_compatible(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->dt_compatible); |
| } |
| |
| static void machine_set_dt_compatible(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->dt_compatible); |
| ms->dt_compatible = g_strdup(value); |
| } |
| |
| static bool machine_get_dump_guest_core(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->dump_guest_core; |
| } |
| |
| static void machine_set_dump_guest_core(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| if (!value && QEMU_MADV_DONTDUMP == QEMU_MADV_INVALID) { |
| error_setg(errp, "Dumping guest memory cannot be disabled on this host"); |
| return; |
| } |
| ms->dump_guest_core = value; |
| } |
| |
| static bool machine_get_mem_merge(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->mem_merge; |
| } |
| |
| static void machine_set_mem_merge(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| if (value && QEMU_MADV_MERGEABLE == QEMU_MADV_INVALID) { |
| error_setg(errp, "Memory merging is not supported on this host"); |
| return; |
| } |
| ms->mem_merge = value; |
| } |
| |
| static bool machine_get_usb(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->usb; |
| } |
| |
| static void machine_set_usb(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| ms->usb = value; |
| ms->usb_disabled = !value; |
| } |
| |
| static bool machine_get_graphics(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->enable_graphics; |
| } |
| |
| static void machine_set_graphics(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| ms->enable_graphics = value; |
| } |
| |
| static char *machine_get_firmware(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->firmware); |
| } |
| |
| static void machine_set_firmware(Object *obj, const char *value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| g_free(ms->firmware); |
| ms->firmware = g_strdup(value); |
| } |
| |
| static void machine_set_suppress_vmdesc(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| ms->suppress_vmdesc = value; |
| } |
| |
| static bool machine_get_suppress_vmdesc(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->suppress_vmdesc; |
| } |
| |
| static char *machine_get_memory_encryption(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| if (ms->cgs) { |
| return g_strdup(object_get_canonical_path_component(OBJECT(ms->cgs))); |
| } |
| |
| return NULL; |
| } |
| |
| static void machine_set_memory_encryption(Object *obj, const char *value, |
| Error **errp) |
| { |
| Object *cgs = |
| object_resolve_path_component(object_get_objects_root(), value); |
| |
| if (!cgs) { |
| error_setg(errp, "No such memory encryption object '%s'", value); |
| return; |
| } |
| |
| object_property_set_link(obj, "confidential-guest-support", cgs, errp); |
| } |
| |
| static void machine_check_confidential_guest_support(const Object *obj, |
| const char *name, |
| Object *new_target, |
| Error **errp) |
| { |
| /* |
| * So far the only constraint is that the target has the |
| * TYPE_CONFIDENTIAL_GUEST_SUPPORT interface, and that's checked |
| * by the QOM core |
| */ |
| } |
| |
| static bool machine_get_nvdimm(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->nvdimms_state->is_enabled; |
| } |
| |
| static void machine_set_nvdimm(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| ms->nvdimms_state->is_enabled = value; |
| } |
| |
| static bool machine_get_hmat(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return ms->numa_state->hmat_enabled; |
| } |
| |
| static void machine_set_hmat(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| ms->numa_state->hmat_enabled = value; |
| } |
| |
| static void machine_get_mem(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| MemorySizeConfiguration mem = { |
| .has_size = true, |
| .size = ms->ram_size, |
| .has_max_size = !!ms->ram_slots, |
| .max_size = ms->maxram_size, |
| .has_slots = !!ms->ram_slots, |
| .slots = ms->ram_slots, |
| }; |
| MemorySizeConfiguration *p_mem = &mem; |
| |
| visit_type_MemorySizeConfiguration(v, name, &p_mem, &error_abort); |
| } |
| |
| static void machine_set_mem(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| ERRP_GUARD(); |
| MachineState *ms = MACHINE(obj); |
| MachineClass *mc = MACHINE_GET_CLASS(obj); |
| MemorySizeConfiguration *mem; |
| |
| if (!visit_type_MemorySizeConfiguration(v, name, &mem, errp)) { |
| return; |
| } |
| |
| if (!mem->has_size) { |
| mem->has_size = true; |
| mem->size = mc->default_ram_size; |
| } |
| mem->size = QEMU_ALIGN_UP(mem->size, 8192); |
| if (mc->fixup_ram_size) { |
| mem->size = mc->fixup_ram_size(mem->size); |
| } |
| if ((ram_addr_t)mem->size != mem->size) { |
| error_setg(errp, "ram size too large"); |
| goto out_free; |
| } |
| |
| if (mem->has_max_size) { |
| if (mem->max_size < mem->size) { |
| error_setg(errp, "invalid value of maxmem: " |
| "maximum memory size (0x%" PRIx64 ") must be at least " |
| "the initial memory size (0x%" PRIx64 ")", |
| mem->max_size, mem->size); |
| goto out_free; |
| } |
| if (mem->has_slots && mem->slots && mem->max_size == mem->size) { |
| error_setg(errp, "invalid value of maxmem: " |
| "memory slots were specified but maximum memory size " |
| "(0x%" PRIx64 ") is equal to the initial memory size " |
| "(0x%" PRIx64 ")", mem->max_size, mem->size); |
| goto out_free; |
| } |
| ms->maxram_size = mem->max_size; |
| } else { |
| if (mem->has_slots) { |
| error_setg(errp, "slots specified but no max-size"); |
| goto out_free; |
| } |
| ms->maxram_size = mem->size; |
| } |
| ms->ram_size = mem->size; |
| ms->ram_slots = mem->has_slots ? mem->slots : 0; |
| out_free: |
| qapi_free_MemorySizeConfiguration(mem); |
| } |
| |
| static char *machine_get_nvdimm_persistence(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->nvdimms_state->persistence_string); |
| } |
| |
| static void machine_set_nvdimm_persistence(Object *obj, const char *value, |
| Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| NVDIMMState *nvdimms_state = ms->nvdimms_state; |
| |
| if (strcmp(value, "cpu") == 0) { |
| nvdimms_state->persistence = 3; |
| } else if (strcmp(value, "mem-ctrl") == 0) { |
| nvdimms_state->persistence = 2; |
| } else { |
| error_setg(errp, "-machine nvdimm-persistence=%s: unsupported option", |
| value); |
| return; |
| } |
| |
| g_free(nvdimms_state->persistence_string); |
| nvdimms_state->persistence_string = g_strdup(value); |
| } |
| |
| void machine_class_allow_dynamic_sysbus_dev(MachineClass *mc, const char *type) |
| { |
| QAPI_LIST_PREPEND(mc->allowed_dynamic_sysbus_devices, g_strdup(type)); |
| } |
| |
| bool device_is_dynamic_sysbus(MachineClass *mc, DeviceState *dev) |
| { |
| Object *obj = OBJECT(dev); |
| |
| if (!object_dynamic_cast(obj, TYPE_SYS_BUS_DEVICE)) { |
| return false; |
| } |
| |
| return device_type_is_dynamic_sysbus(mc, object_get_typename(obj)); |
| } |
| |
| bool device_type_is_dynamic_sysbus(MachineClass *mc, const char *type) |
| { |
| bool allowed = false; |
| strList *wl; |
| ObjectClass *klass = object_class_by_name(type); |
| |
| for (wl = mc->allowed_dynamic_sysbus_devices; |
| !allowed && wl; |
| wl = wl->next) { |
| allowed |= !!object_class_dynamic_cast(klass, wl->value); |
| } |
| |
| return allowed; |
| } |
| |
| static char *machine_get_audiodev(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| return g_strdup(ms->audiodev); |
| } |
| |
| static void machine_set_audiodev(Object *obj, const char *value, |
| Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| if (!audio_state_by_name(value, errp)) { |
| return; |
| } |
| |
| g_free(ms->audiodev); |
| ms->audiodev = g_strdup(value); |
| } |
| |
| HotpluggableCPUList *machine_query_hotpluggable_cpus(MachineState *machine) |
| { |
| int i; |
| HotpluggableCPUList *head = NULL; |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| |
| /* force board to initialize possible_cpus if it hasn't been done yet */ |
| mc->possible_cpu_arch_ids(machine); |
| |
| for (i = 0; i < machine->possible_cpus->len; i++) { |
| CPUState *cpu; |
| HotpluggableCPU *cpu_item = g_new0(typeof(*cpu_item), 1); |
| |
| cpu_item->type = g_strdup(machine->possible_cpus->cpus[i].type); |
| cpu_item->vcpus_count = machine->possible_cpus->cpus[i].vcpus_count; |
| cpu_item->props = g_memdup(&machine->possible_cpus->cpus[i].props, |
| sizeof(*cpu_item->props)); |
| |
| cpu = machine->possible_cpus->cpus[i].cpu; |
| if (cpu) { |
| cpu_item->qom_path = object_get_canonical_path(OBJECT(cpu)); |
| } |
| QAPI_LIST_PREPEND(head, cpu_item); |
| } |
| return head; |
| } |
| |
| /** |
| * machine_set_cpu_numa_node: |
| * @machine: machine object to modify |
| * @props: specifies which cpu objects to assign to |
| * numa node specified by @props.node_id |
| * @errp: if an error occurs, a pointer to an area to store the error |
| * |
| * Associate NUMA node specified by @props.node_id with cpu slots that |
| * match socket/core/thread-ids specified by @props. It's recommended to use |
| * query-hotpluggable-cpus.props values to specify affected cpu slots, |
| * which would lead to exact 1:1 mapping of cpu slots to NUMA node. |
| * |
| * However for CLI convenience it's possible to pass in subset of properties, |
| * which would affect all cpu slots that match it. |
| * Ex for pc machine: |
| * -smp 4,cores=2,sockets=2 -numa node,nodeid=0 -numa node,nodeid=1 \ |
| * -numa cpu,node-id=0,socket_id=0 \ |
| * -numa cpu,node-id=1,socket_id=1 |
| * will assign all child cores of socket 0 to node 0 and |
| * of socket 1 to node 1. |
| * |
| * On attempt of reassigning (already assigned) cpu slot to another NUMA node, |
| * return error. |
| * Empty subset is disallowed and function will return with error in this case. |
| */ |
| void machine_set_cpu_numa_node(MachineState *machine, |
| const CpuInstanceProperties *props, Error **errp) |
| { |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| NodeInfo *numa_info = machine->numa_state->nodes; |
| bool match = false; |
| int i; |
| |
| if (!mc->possible_cpu_arch_ids) { |
| error_setg(errp, "mapping of CPUs to NUMA node is not supported"); |
| return; |
| } |
| |
| /* disabling node mapping is not supported, forbid it */ |
| assert(props->has_node_id); |
| |
| /* force board to initialize possible_cpus if it hasn't been done yet */ |
| mc->possible_cpu_arch_ids(machine); |
| |
| for (i = 0; i < machine->possible_cpus->len; i++) { |
| CPUArchId *slot = &machine->possible_cpus->cpus[i]; |
| |
| /* reject unsupported by board properties */ |
| if (props->has_thread_id && !slot->props.has_thread_id) { |
| error_setg(errp, "thread-id is not supported"); |
| return; |
| } |
| |
| if (props->has_core_id && !slot->props.has_core_id) { |
| error_setg(errp, "core-id is not supported"); |
| return; |
| } |
| |
| if (props->has_module_id && !slot->props.has_module_id) { |
| error_setg(errp, "module-id is not supported"); |
| return; |
| } |
| |
| if (props->has_cluster_id && !slot->props.has_cluster_id) { |
| error_setg(errp, "cluster-id is not supported"); |
| return; |
| } |
| |
| if (props->has_socket_id && !slot->props.has_socket_id) { |
| error_setg(errp, "socket-id is not supported"); |
| return; |
| } |
| |
| if (props->has_die_id && !slot->props.has_die_id) { |
| error_setg(errp, "die-id is not supported"); |
| return; |
| } |
| |
| /* skip slots with explicit mismatch */ |
| if (props->has_thread_id && props->thread_id != slot->props.thread_id) { |
| continue; |
| } |
| |
| if (props->has_core_id && props->core_id != slot->props.core_id) { |
| continue; |
| } |
| |
| if (props->has_module_id && |
| props->module_id != slot->props.module_id) { |
| continue; |
| } |
| |
| if (props->has_cluster_id && |
| props->cluster_id != slot->props.cluster_id) { |
| continue; |
| } |
| |
| if (props->has_die_id && props->die_id != slot->props.die_id) { |
| continue; |
| } |
| |
| if (props->has_socket_id && props->socket_id != slot->props.socket_id) { |
| continue; |
| } |
| |
| /* reject assignment if slot is already assigned, for compatibility |
| * of legacy cpu_index mapping with SPAPR core based mapping do not |
| * error out if cpu thread and matched core have the same node-id */ |
| if (slot->props.has_node_id && |
| slot->props.node_id != props->node_id) { |
| error_setg(errp, "CPU is already assigned to node-id: %" PRId64, |
| slot->props.node_id); |
| return; |
| } |
| |
| /* assign slot to node as it's matched '-numa cpu' key */ |
| match = true; |
| slot->props.node_id = props->node_id; |
| slot->props.has_node_id = props->has_node_id; |
| |
| if (machine->numa_state->hmat_enabled) { |
| if ((numa_info[props->node_id].initiator < MAX_NODES) && |
| (props->node_id != numa_info[props->node_id].initiator)) { |
| error_setg(errp, "The initiator of CPU NUMA node %" PRId64 |
| " should be itself (got %" PRIu16 ")", |
| props->node_id, numa_info[props->node_id].initiator); |
| return; |
| } |
| numa_info[props->node_id].has_cpu = true; |
| numa_info[props->node_id].initiator = props->node_id; |
| } |
| } |
| |
| if (!match) { |
| error_setg(errp, "no match found"); |
| } |
| } |
| |
| static void machine_get_smp(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| SMPConfiguration *config = &(SMPConfiguration){ |
| .has_cpus = true, .cpus = ms->smp.cpus, |
| .has_drawers = true, .drawers = ms->smp.drawers, |
| .has_books = true, .books = ms->smp.books, |
| .has_sockets = true, .sockets = ms->smp.sockets, |
| .has_dies = true, .dies = ms->smp.dies, |
| .has_clusters = true, .clusters = ms->smp.clusters, |
| .has_modules = true, .modules = ms->smp.modules, |
| .has_cores = true, .cores = ms->smp.cores, |
| .has_threads = true, .threads = ms->smp.threads, |
| .has_maxcpus = true, .maxcpus = ms->smp.max_cpus, |
| }; |
| |
| if (!visit_type_SMPConfiguration(v, name, &config, &error_abort)) { |
| return; |
| } |
| } |
| |
| static void machine_set_smp(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| g_autoptr(SMPConfiguration) config = NULL; |
| |
| if (!visit_type_SMPConfiguration(v, name, &config, errp)) { |
| return; |
| } |
| |
| machine_parse_smp_config(ms, config, errp); |
| } |
| |
| static void machine_get_boot(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| BootConfiguration *config = &ms->boot_config; |
| visit_type_BootConfiguration(v, name, &config, &error_abort); |
| } |
| |
| static void machine_free_boot_config(MachineState *ms) |
| { |
| g_free(ms->boot_config.order); |
| g_free(ms->boot_config.once); |
| g_free(ms->boot_config.splash); |
| } |
| |
| static void machine_copy_boot_config(MachineState *ms, BootConfiguration *config) |
| { |
| MachineClass *machine_class = MACHINE_GET_CLASS(ms); |
| |
| machine_free_boot_config(ms); |
| ms->boot_config = *config; |
| if (!config->order) { |
| ms->boot_config.order = g_strdup(machine_class->default_boot_order); |
| } |
| } |
| |
| static void machine_set_boot(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| ERRP_GUARD(); |
| MachineState *ms = MACHINE(obj); |
| BootConfiguration *config = NULL; |
| |
| if (!visit_type_BootConfiguration(v, name, &config, errp)) { |
| return; |
| } |
| if (config->order) { |
| validate_bootdevices(config->order, errp); |
| if (*errp) { |
| goto out_free; |
| } |
| } |
| if (config->once) { |
| validate_bootdevices(config->once, errp); |
| if (*errp) { |
| goto out_free; |
| } |
| } |
| |
| machine_copy_boot_config(ms, config); |
| /* Strings live in ms->boot_config. */ |
| free(config); |
| return; |
| |
| out_free: |
| qapi_free_BootConfiguration(config); |
| } |
| |
| void machine_add_audiodev_property(MachineClass *mc) |
| { |
| ObjectClass *oc = OBJECT_CLASS(mc); |
| |
| object_class_property_add_str(oc, "audiodev", |
| machine_get_audiodev, |
| machine_set_audiodev); |
| object_class_property_set_description(oc, "audiodev", |
| "Audiodev to use for default machine devices"); |
| } |
| |
| static void machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| /* Default 128 MB as guest ram size */ |
| mc->default_ram_size = 128 * MiB; |
| mc->rom_file_has_mr = true; |
| /* |
| * SMBIOS 3.1.0 7.18.5 Memory Device — Extended Size |
| * use max possible value that could be encoded into |
| * 'Extended Size' field (2047Tb). |
| */ |
| mc->smbios_memory_device_size = 2047 * TiB; |
| |
| /* numa node memory size aligned on 8MB by default. |
| * On Linux, each node's border has to be 8MB aligned |
| */ |
| mc->numa_mem_align_shift = 23; |
| |
| object_class_property_add_str(oc, "kernel", |
| machine_get_kernel, machine_set_kernel); |
| object_class_property_set_description(oc, "kernel", |
| "Linux kernel image file"); |
| |
| object_class_property_add_str(oc, "initrd", |
| machine_get_initrd, machine_set_initrd); |
| object_class_property_set_description(oc, "initrd", |
| "Linux initial ramdisk file"); |
| |
| object_class_property_add_str(oc, "append", |
| machine_get_append, machine_set_append); |
| object_class_property_set_description(oc, "append", |
| "Linux kernel command line"); |
| |
| object_class_property_add_str(oc, "dtb", |
| machine_get_dtb, machine_set_dtb); |
| object_class_property_set_description(oc, "dtb", |
| "Linux kernel device tree file"); |
| |
| object_class_property_add_str(oc, "dumpdtb", |
| machine_get_dumpdtb, machine_set_dumpdtb); |
| object_class_property_set_description(oc, "dumpdtb", |
| "Dump current dtb to a file and quit"); |
| |
| object_class_property_add(oc, "boot", "BootConfiguration", |
| machine_get_boot, machine_set_boot, |
| NULL, NULL); |
| object_class_property_set_description(oc, "boot", |
| "Boot configuration"); |
| |
| object_class_property_add(oc, "smp", "SMPConfiguration", |
| machine_get_smp, machine_set_smp, |
| NULL, NULL); |
| object_class_property_set_description(oc, "smp", |
| "CPU topology"); |
| |
| object_class_property_add(oc, "phandle-start", "int", |
| machine_get_phandle_start, machine_set_phandle_start, |
| NULL, NULL); |
| object_class_property_set_description(oc, "phandle-start", |
| "The first phandle ID we may generate dynamically"); |
| |
| object_class_property_add_str(oc, "dt-compatible", |
| machine_get_dt_compatible, machine_set_dt_compatible); |
| object_class_property_set_description(oc, "dt-compatible", |
| "Overrides the \"compatible\" property of the dt root node"); |
| |
| object_class_property_add_bool(oc, "dump-guest-core", |
| machine_get_dump_guest_core, machine_set_dump_guest_core); |
| object_class_property_set_description(oc, "dump-guest-core", |
| "Include guest memory in a core dump"); |
| |
| object_class_property_add_bool(oc, "mem-merge", |
| machine_get_mem_merge, machine_set_mem_merge); |
| object_class_property_set_description(oc, "mem-merge", |
| "Enable/disable memory merge support"); |
| |
| object_class_property_add_bool(oc, "usb", |
| machine_get_usb, machine_set_usb); |
| object_class_property_set_description(oc, "usb", |
| "Set on/off to enable/disable usb"); |
| |
| object_class_property_add_bool(oc, "graphics", |
| machine_get_graphics, machine_set_graphics); |
| object_class_property_set_description(oc, "graphics", |
| "Set on/off to enable/disable graphics emulation"); |
| |
| object_class_property_add_str(oc, "firmware", |
| machine_get_firmware, machine_set_firmware); |
| object_class_property_set_description(oc, "firmware", |
| "Firmware image"); |
| |
| object_class_property_add_bool(oc, "suppress-vmdesc", |
| machine_get_suppress_vmdesc, machine_set_suppress_vmdesc); |
| object_class_property_set_description(oc, "suppress-vmdesc", |
| "Set on to disable self-describing migration"); |
| |
| object_class_property_add_link(oc, "confidential-guest-support", |
| TYPE_CONFIDENTIAL_GUEST_SUPPORT, |
| offsetof(MachineState, cgs), |
| machine_check_confidential_guest_support, |
| OBJ_PROP_LINK_STRONG); |
| object_class_property_set_description(oc, "confidential-guest-support", |
| "Set confidential guest scheme to support"); |
| |
| /* For compatibility */ |
| object_class_property_add_str(oc, "memory-encryption", |
| machine_get_memory_encryption, machine_set_memory_encryption); |
| object_class_property_set_description(oc, "memory-encryption", |
| "Set memory encryption object to use"); |
| |
| object_class_property_add_link(oc, "memory-backend", TYPE_MEMORY_BACKEND, |
| offsetof(MachineState, memdev), object_property_allow_set_link, |
| OBJ_PROP_LINK_STRONG); |
| object_class_property_set_description(oc, "memory-backend", |
| "Set RAM backend" |
| "Valid value is ID of hostmem based backend"); |
| |
| object_class_property_add(oc, "memory", "MemorySizeConfiguration", |
| machine_get_mem, machine_set_mem, |
| NULL, NULL); |
| object_class_property_set_description(oc, "memory", |
| "Memory size configuration"); |
| } |
| |
| static void machine_class_base_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| mc->max_cpus = mc->max_cpus ?: 1; |
| mc->min_cpus = mc->min_cpus ?: 1; |
| mc->default_cpus = mc->default_cpus ?: 1; |
| |
| if (!object_class_is_abstract(oc)) { |
| const char *cname = object_class_get_name(oc); |
| assert(g_str_has_suffix(cname, TYPE_MACHINE_SUFFIX)); |
| mc->name = g_strndup(cname, |
| strlen(cname) - strlen(TYPE_MACHINE_SUFFIX)); |
| mc->compat_props = g_ptr_array_new(); |
| } |
| } |
| |
| static void machine_initfn(Object *obj) |
| { |
| MachineState *ms = MACHINE(obj); |
| MachineClass *mc = MACHINE_GET_CLASS(obj); |
| |
| container_get(obj, "/peripheral"); |
| container_get(obj, "/peripheral-anon"); |
| |
| ms->dump_guest_core = true; |
| ms->mem_merge = (QEMU_MADV_MERGEABLE != QEMU_MADV_INVALID); |
| ms->enable_graphics = true; |
| ms->kernel_cmdline = g_strdup(""); |
| ms->ram_size = mc->default_ram_size; |
| ms->maxram_size = mc->default_ram_size; |
| |
| if (mc->nvdimm_supported) { |
| ms->nvdimms_state = g_new0(NVDIMMState, 1); |
| object_property_add_bool(obj, "nvdimm", |
| machine_get_nvdimm, machine_set_nvdimm); |
| object_property_set_description(obj, "nvdimm", |
| "Set on/off to enable/disable " |
| "NVDIMM instantiation"); |
| |
| object_property_add_str(obj, "nvdimm-persistence", |
| machine_get_nvdimm_persistence, |
| machine_set_nvdimm_persistence); |
| object_property_set_description(obj, "nvdimm-persistence", |
| "Set NVDIMM persistence" |
| "Valid values are cpu, mem-ctrl"); |
| } |
| |
| if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) { |
| ms->numa_state = g_new0(NumaState, 1); |
| object_property_add_bool(obj, "hmat", |
| machine_get_hmat, machine_set_hmat); |
| object_property_set_description(obj, "hmat", |
| "Set on/off to enable/disable " |
| "ACPI Heterogeneous Memory Attribute " |
| "Table (HMAT)"); |
| } |
| |
| /* default to mc->default_cpus */ |
| ms->smp.cpus = mc->default_cpus; |
| ms->smp.max_cpus = mc->default_cpus; |
| ms->smp.drawers = 1; |
| ms->smp.books = 1; |
| ms->smp.sockets = 1; |
| ms->smp.dies = 1; |
| ms->smp.clusters = 1; |
| ms->smp.modules = 1; |
| ms->smp.cores = 1; |
| ms->smp.threads = 1; |
| |
| machine_copy_boot_config(ms, &(BootConfiguration){ 0 }); |
| } |
| |
| static void machine_finalize(Object *obj) |
| { |
| MachineState *ms = MACHINE(obj); |
| |
| machine_free_boot_config(ms); |
| g_free(ms->kernel_filename); |
| g_free(ms->initrd_filename); |
| g_free(ms->kernel_cmdline); |
| g_free(ms->dtb); |
| g_free(ms->dumpdtb); |
| g_free(ms->dt_compatible); |
| g_free(ms->firmware); |
| g_free(ms->device_memory); |
| g_free(ms->nvdimms_state); |
| g_free(ms->numa_state); |
| g_free(ms->audiodev); |
| } |
| |
| bool machine_usb(MachineState *machine) |
| { |
| return machine->usb; |
| } |
| |
| int machine_phandle_start(MachineState *machine) |
| { |
| return machine->phandle_start; |
| } |
| |
| bool machine_dump_guest_core(MachineState *machine) |
| { |
| return machine->dump_guest_core; |
| } |
| |
| bool machine_mem_merge(MachineState *machine) |
| { |
| return machine->mem_merge; |
| } |
| |
| bool machine_require_guest_memfd(MachineState *machine) |
| { |
| return machine->cgs && machine->cgs->require_guest_memfd; |
| } |
| |
| static char *cpu_slot_to_string(const CPUArchId *cpu) |
| { |
| GString *s = g_string_new(NULL); |
| if (cpu->props.has_socket_id) { |
| g_string_append_printf(s, "socket-id: %"PRId64, cpu->props.socket_id); |
| } |
| if (cpu->props.has_die_id) { |
| if (s->len) { |
| g_string_append_printf(s, ", "); |
| } |
| g_string_append_printf(s, "die-id: %"PRId64, cpu->props.die_id); |
| } |
| if (cpu->props.has_cluster_id) { |
| if (s->len) { |
| g_string_append_printf(s, ", "); |
| } |
| g_string_append_printf(s, "cluster-id: %"PRId64, cpu->props.cluster_id); |
| } |
| if (cpu->props.has_module_id) { |
| if (s->len) { |
| g_string_append_printf(s, ", "); |
| } |
| g_string_append_printf(s, "module-id: %"PRId64, cpu->props.module_id); |
| } |
| if (cpu->props.has_core_id) { |
| if (s->len) { |
| g_string_append_printf(s, ", "); |
| } |
| g_string_append_printf(s, "core-id: %"PRId64, cpu->props.core_id); |
| } |
| if (cpu->props.has_thread_id) { |
| if (s->len) { |
| g_string_append_printf(s, ", "); |
| } |
| g_string_append_printf(s, "thread-id: %"PRId64, cpu->props.thread_id); |
| } |
| return g_string_free(s, false); |
| } |
| |
| static void numa_validate_initiator(NumaState *numa_state) |
| { |
| int i; |
| NodeInfo *numa_info = numa_state->nodes; |
| |
| for (i = 0; i < numa_state->num_nodes; i++) { |
| if (numa_info[i].initiator == MAX_NODES) { |
| continue; |
| } |
| |
| if (!numa_info[numa_info[i].initiator].present) { |
| error_report("NUMA node %" PRIu16 " is missing, use " |
| "'-numa node' option to declare it first", |
| numa_info[i].initiator); |
| exit(1); |
| } |
| |
| if (!numa_info[numa_info[i].initiator].has_cpu) { |
| error_report("The initiator of NUMA node %d is invalid", i); |
| exit(1); |
| } |
| } |
| } |
| |
| static void machine_numa_finish_cpu_init(MachineState *machine) |
| { |
| int i; |
| bool default_mapping; |
| GString *s = g_string_new(NULL); |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(machine); |
| |
| assert(machine->numa_state->num_nodes); |
| for (i = 0; i < possible_cpus->len; i++) { |
| if (possible_cpus->cpus[i].props.has_node_id) { |
| break; |
| } |
| } |
| default_mapping = (i == possible_cpus->len); |
| |
| for (i = 0; i < possible_cpus->len; i++) { |
| const CPUArchId *cpu_slot = &possible_cpus->cpus[i]; |
| |
| if (!cpu_slot->props.has_node_id) { |
| /* fetch default mapping from board and enable it */ |
| CpuInstanceProperties props = cpu_slot->props; |
| |
| props.node_id = mc->get_default_cpu_node_id(machine, i); |
| if (!default_mapping) { |
| /* record slots with not set mapping, |
| * TODO: make it hard error in future */ |
| char *cpu_str = cpu_slot_to_string(cpu_slot); |
| g_string_append_printf(s, "%sCPU %d [%s]", |
| s->len ? ", " : "", i, cpu_str); |
| g_free(cpu_str); |
| |
| /* non mapped cpus used to fallback to node 0 */ |
| props.node_id = 0; |
| } |
| |
| props.has_node_id = true; |
| machine_set_cpu_numa_node(machine, &props, &error_fatal); |
| } |
| } |
| |
| if (machine->numa_state->hmat_enabled) { |
| numa_validate_initiator(machine->numa_state); |
| } |
| |
| if (s->len && !qtest_enabled()) { |
| warn_report("CPU(s) not present in any NUMA nodes: %s", |
| s->str); |
| warn_report("All CPU(s) up to maxcpus should be described " |
| "in NUMA config, ability to start up with partial NUMA " |
| "mappings is obsoleted and will be removed in future"); |
| } |
| g_string_free(s, true); |
| } |
| |
| static void validate_cpu_cluster_to_numa_boundary(MachineState *ms) |
| { |
| MachineClass *mc = MACHINE_GET_CLASS(ms); |
| NumaState *state = ms->numa_state; |
| const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms); |
| const CPUArchId *cpus = possible_cpus->cpus; |
| int i, j; |
| |
| if (qtest_enabled() || state->num_nodes <= 1 || possible_cpus->len <= 1) { |
| return; |
| } |
| |
| /* |
| * The Linux scheduling domain can't be parsed when the multiple CPUs |
| * in one cluster have been associated with different NUMA nodes. However, |
| * it's fine to associate one NUMA node with CPUs in different clusters. |
| */ |
| for (i = 0; i < possible_cpus->len; i++) { |
| for (j = i + 1; j < possible_cpus->len; j++) { |
| if (cpus[i].props.has_socket_id && |
| cpus[i].props.has_cluster_id && |
| cpus[i].props.has_node_id && |
| cpus[j].props.has_socket_id && |
| cpus[j].props.has_cluster_id && |
| cpus[j].props.has_node_id && |
| cpus[i].props.socket_id == cpus[j].props.socket_id && |
| cpus[i].props.cluster_id == cpus[j].props.cluster_id && |
| cpus[i].props.node_id != cpus[j].props.node_id) { |
| warn_report("CPU-%d and CPU-%d in socket-%" PRId64 "-cluster-%" PRId64 |
| " have been associated with node-%" PRId64 " and node-%" PRId64 |
| " respectively. It can cause OSes like Linux to" |
| " misbehave", i, j, cpus[i].props.socket_id, |
| cpus[i].props.cluster_id, cpus[i].props.node_id, |
| cpus[j].props.node_id); |
| } |
| } |
| } |
| } |
| |
| MemoryRegion *machine_consume_memdev(MachineState *machine, |
| HostMemoryBackend *backend) |
| { |
| MemoryRegion *ret = host_memory_backend_get_memory(backend); |
| |
| if (host_memory_backend_is_mapped(backend)) { |
| error_report("memory backend %s can't be used multiple times.", |
| object_get_canonical_path_component(OBJECT(backend))); |
| exit(EXIT_FAILURE); |
| } |
| host_memory_backend_set_mapped(backend, true); |
| vmstate_register_ram_global(ret); |
| return ret; |
| } |
| |
| static bool create_default_memdev(MachineState *ms, const char *path, Error **errp) |
| { |
| Object *obj; |
| MachineClass *mc = MACHINE_GET_CLASS(ms); |
| bool r = false; |
| |
| obj = object_new(path ? TYPE_MEMORY_BACKEND_FILE : TYPE_MEMORY_BACKEND_RAM); |
| if (path) { |
| if (!object_property_set_str(obj, "mem-path", path, errp)) { |
| goto out; |
| } |
| } |
| if (!object_property_set_int(obj, "size", ms->ram_size, errp)) { |
| goto out; |
| } |
| object_property_add_child(object_get_objects_root(), mc->default_ram_id, |
| obj); |
| /* Ensure backend's memory region name is equal to mc->default_ram_id */ |
| if (!object_property_set_bool(obj, "x-use-canonical-path-for-ramblock-id", |
| false, errp)) { |
| goto out; |
| } |
| if (!user_creatable_complete(USER_CREATABLE(obj), errp)) { |
| goto out; |
| } |
| r = object_property_set_link(OBJECT(ms), "memory-backend", obj, errp); |
| |
| out: |
| object_unref(obj); |
| return r; |
| } |
| |
| const char *machine_class_default_cpu_type(MachineClass *mc) |
| { |
| if (mc->valid_cpu_types && !mc->valid_cpu_types[1]) { |
| /* Only a single CPU type allowed: use it as default. */ |
| return mc->valid_cpu_types[0]; |
| } |
| return mc->default_cpu_type; |
| } |
| |
| static bool is_cpu_type_supported(const MachineState *machine, Error **errp) |
| { |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| ObjectClass *oc = object_class_by_name(machine->cpu_type); |
| CPUClass *cc; |
| int i; |
| |
| /* |
| * Check if the user specified CPU type is supported when the valid |
| * CPU types have been determined. Note that the user specified CPU |
| * type is provided through '-cpu' option. |
| */ |
| if (mc->valid_cpu_types) { |
| assert(mc->valid_cpu_types[0] != NULL); |
| for (i = 0; mc->valid_cpu_types[i]; i++) { |
| if (object_class_dynamic_cast(oc, mc->valid_cpu_types[i])) { |
| break; |
| } |
| } |
| |
| /* The user specified CPU type isn't valid */ |
| if (!mc->valid_cpu_types[i]) { |
| g_autofree char *requested = cpu_model_from_type(machine->cpu_type); |
| error_setg(errp, "Invalid CPU model: %s", requested); |
| if (!mc->valid_cpu_types[1]) { |
| g_autofree char *model = cpu_model_from_type( |
| mc->valid_cpu_types[0]); |
| error_append_hint(errp, "The only valid type is: %s\n", model); |
| } else { |
| error_append_hint(errp, "The valid models are: "); |
| for (i = 0; mc->valid_cpu_types[i]; i++) { |
| g_autofree char *model = cpu_model_from_type( |
| mc->valid_cpu_types[i]); |
| error_append_hint(errp, "%s%s", |
| model, |
| mc->valid_cpu_types[i + 1] ? ", " : ""); |
| } |
| error_append_hint(errp, "\n"); |
| } |
| |
| return false; |
| } |
| } |
| |
| /* Check if CPU type is deprecated and warn if so */ |
| cc = CPU_CLASS(oc); |
| assert(cc != NULL); |
| if (cc->deprecation_note) { |
| warn_report("CPU model %s is deprecated -- %s", |
| machine->cpu_type, cc->deprecation_note); |
| } |
| |
| return true; |
| } |
| |
| void machine_run_board_init(MachineState *machine, const char *mem_path, Error **errp) |
| { |
| ERRP_GUARD(); |
| MachineClass *machine_class = MACHINE_GET_CLASS(machine); |
| |
| /* This checkpoint is required by replay to separate prior clock |
| reading from the other reads, because timer polling functions query |
| clock values from the log. */ |
| replay_checkpoint(CHECKPOINT_INIT); |
| |
| if (!xen_enabled()) { |
| /* On 32-bit hosts, QEMU is limited by virtual address space */ |
| if (machine->ram_size > (2047 << 20) && HOST_LONG_BITS == 32) { |
| error_setg(errp, "at most 2047 MB RAM can be simulated"); |
| return; |
| } |
| } |
| |
| if (machine->memdev) { |
| ram_addr_t backend_size = object_property_get_uint(OBJECT(machine->memdev), |
| "size", &error_abort); |
| if (backend_size != machine->ram_size) { |
| error_setg(errp, "Machine memory size does not match the size of the memory backend"); |
| return; |
| } |
| } else if (machine_class->default_ram_id && machine->ram_size && |
| numa_uses_legacy_mem()) { |
| if (object_property_find(object_get_objects_root(), |
| machine_class->default_ram_id)) { |
| error_setg(errp, "object's id '%s' is reserved for the default" |
| " RAM backend, it can't be used for any other purposes", |
| machine_class->default_ram_id); |
| error_append_hint(errp, |
| "Change the object's 'id' to something else or disable" |
| " automatic creation of the default RAM backend by setting" |
| " 'memory-backend=%s' with '-machine'.\n", |
| machine_class->default_ram_id); |
| return; |
| } |
| if (!create_default_memdev(current_machine, mem_path, errp)) { |
| return; |
| } |
| } |
| |
| if (machine->numa_state) { |
| numa_complete_configuration(machine); |
| if (machine->numa_state->num_nodes) { |
| machine_numa_finish_cpu_init(machine); |
| if (machine_class->cpu_cluster_has_numa_boundary) { |
| validate_cpu_cluster_to_numa_boundary(machine); |
| } |
| } |
| } |
| |
| if (!machine->ram && machine->memdev) { |
| machine->ram = machine_consume_memdev(machine, machine->memdev); |
| } |
| |
| /* Check if the CPU type is supported */ |
| if (machine->cpu_type && !is_cpu_type_supported(machine, errp)) { |
| return; |
| } |
| |
| if (machine->cgs) { |
| /* |
| * With confidential guests, the host can't see the real |
| * contents of RAM, so there's no point in it trying to merge |
| * areas. |
| */ |
| machine_set_mem_merge(OBJECT(machine), false, &error_abort); |
| |
| /* |
| * Virtio devices can't count on directly accessing guest |
| * memory, so they need iommu_platform=on to use normal DMA |
| * mechanisms. That requires also disabling legacy virtio |
| * support for those virtio pci devices which allow it. |
| */ |
| object_register_sugar_prop(TYPE_VIRTIO_PCI, "disable-legacy", |
| "on", true); |
| object_register_sugar_prop(TYPE_VIRTIO_DEVICE, "iommu_platform", |
| "on", false); |
| } |
| |
| accel_init_interfaces(ACCEL_GET_CLASS(machine->accelerator)); |
| machine_class->init(machine); |
| phase_advance(PHASE_MACHINE_INITIALIZED); |
| } |
| |
| static NotifierList machine_init_done_notifiers = |
| NOTIFIER_LIST_INITIALIZER(machine_init_done_notifiers); |
| |
| void qemu_add_machine_init_done_notifier(Notifier *notify) |
| { |
| notifier_list_add(&machine_init_done_notifiers, notify); |
| if (phase_check(PHASE_MACHINE_READY)) { |
| notify->notify(notify, NULL); |
| } |
| } |
| |
| void qemu_remove_machine_init_done_notifier(Notifier *notify) |
| { |
| notifier_remove(notify); |
| } |
| |
| void qdev_machine_creation_done(void) |
| { |
| cpu_synchronize_all_post_init(); |
| |
| if (current_machine->boot_config.once) { |
| qemu_boot_set(current_machine->boot_config.once, &error_fatal); |
| qemu_register_reset(restore_boot_order, g_strdup(current_machine->boot_config.order)); |
| } |
| |
| /* |
| * ok, initial machine setup is done, starting from now we can |
| * only create hotpluggable devices |
| */ |
| phase_advance(PHASE_MACHINE_READY); |
| qdev_assert_realized_properly(); |
| |
| /* TODO: once all bus devices are qdevified, this should be done |
| * when bus is created by qdev.c */ |
| /* |
| * This is where we arrange for the sysbus to be reset when the |
| * whole simulation is reset. In turn, resetting the sysbus will cause |
| * all devices hanging off it (and all their child buses, recursively) |
| * to be reset. Note that this will *not* reset any Device objects |
| * which are not attached to some part of the qbus tree! |
| */ |
| qemu_register_resettable(OBJECT(sysbus_get_default())); |
| |
| notifier_list_notify(&machine_init_done_notifiers, NULL); |
| |
| if (rom_check_and_register_reset() != 0) { |
| exit(1); |
| } |
| |
| replay_start(); |
| |
| /* This checkpoint is required by replay to separate prior clock |
| reading from the other reads, because timer polling functions query |
| clock values from the log. */ |
| replay_checkpoint(CHECKPOINT_RESET); |
| qemu_system_reset(SHUTDOWN_CAUSE_NONE); |
| register_global_state(); |
| } |
| |
| static const TypeInfo machine_info = { |
| .name = TYPE_MACHINE, |
| .parent = TYPE_OBJECT, |
| .abstract = true, |
| .class_size = sizeof(MachineClass), |
| .class_init = machine_class_init, |
| .class_base_init = machine_class_base_init, |
| .instance_size = sizeof(MachineState), |
| .instance_init = machine_initfn, |
| .instance_finalize = machine_finalize, |
| }; |
| |
| static void machine_register_types(void) |
| { |
| type_register_static(&machine_info); |
| } |
| |
| type_init(machine_register_types) |