/*
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2019 Western Digital Corporation or its affiliates.
 *
 * Authors:
 *   Anup Patel <anup.patel@wdc.com>
 */

#include <sbi/riscv_asm.h>
#include <sbi/riscv_encoding.h>
#include <sbi/riscv_elf.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_scratch.h>
#include <sbi/sbi_trap.h>

#define BOOT_STATUS_LOTTERY_DONE	1
#define BOOT_STATUS_BOOT_HART_DONE	2

.macro	MOV_3R __d0, __s0, __d1, __s1, __d2, __s2
	add	\__d0, \__s0, zero
	add	\__d1, \__s1, zero
	add	\__d2, \__s2, zero
.endm

.macro	MOV_5R __d0, __s0, __d1, __s1, __d2, __s2, __d3, __s3, __d4, __s4
	add	\__d0, \__s0, zero
	add	\__d1, \__s1, zero
	add	\__d2, \__s2, zero
	add	\__d3, \__s3, zero
	add	\__d4, \__s4, zero
.endm

	.section .entry, "ax", %progbits
	.align 3
	.globl _start
	.globl _start_warm
_start:
	/* Find preferred boot HART id */
	MOV_3R	s0, a0, s1, a1, s2, a2
	call	fw_boot_hart
	add	a6, a0, zero
	MOV_3R	a0, s0, a1, s1, a2, s2
	li	a7, -1
	beq	a6, a7, _try_lottery
	/* Jump to relocation wait loop if we are not boot hart */
	bne	a0, a6, _wait_for_boot_hart
_try_lottery:
	/* Jump to relocation wait loop if we don't get relocation lottery */
	lla	a6, _boot_status
	li	a7, BOOT_STATUS_LOTTERY_DONE
	amoswap.w a6, a7, (a6)
	bnez	a6, _wait_for_boot_hart

	/* relocate the global table content */
	li	t0, FW_TEXT_START	/* link start */
	lla	t1, _fw_start		/* load start */
	sub	t2, t1, t0		/* load offset */
	lla	t0, __rel_dyn_start
	lla	t1, __rel_dyn_end
	beq	t0, t1, _relocate_done
2:
	REG_L	t5, REGBYTES(t0)	/* t5 <-- relocation info:type */
	li	t3, R_RISCV_RELATIVE	/* reloc type R_RISCV_RELATIVE */
	bne	t5, t3, 3f
	REG_L	t3, 0(t0)
	REG_L	t5, (REGBYTES * 2)(t0)	/* t5 <-- addend */
	add	t5, t5, t2
	add	t3, t3, t2
	REG_S	t5, 0(t3)		/* store runtime address to the GOT entry */

3:
	addi	t0, t0, (REGBYTES * 3)
	blt	t0, t1, 2b
_relocate_done:
	/* At this point we are running from link address */

	/* Reset all registers except ra, a0, a1, a2, a3 and a4 for boot HART */
	li	ra, 0
	call	_reset_regs

	/* Zero-out BSS */
	lla	s4, _bss_start
	lla	s5, _bss_end
_bss_zero:
	REG_S	zero, (s4)
	add	s4, s4, __SIZEOF_POINTER__
	blt	s4, s5, _bss_zero

	/* Setup temporary trap handler */
	lla	s4, _start_hang
	csrw	CSR_MTVEC, s4

	/* Setup temporary stack */
	lla	s4, _fw_end
	li	s5, (SBI_SCRATCH_SIZE * 2)
	add	sp, s4, s5

	/* Allow main firmware to save info */
	MOV_5R	s0, a0, s1, a1, s2, a2, s3, a3, s4, a4
	call	fw_save_info
	MOV_5R	a0, s0, a1, s1, a2, s2, a3, s3, a4, s4

#ifdef FW_FDT_PATH
	/* Override previous arg1 */
	lla	a1, fw_fdt_bin
#endif

	/*
	 * Initialize platform
	 * Note: The a0 to a4 registers passed to the
	 * firmware are parameters to this function.
	 */
	MOV_5R	s0, a0, s1, a1, s2, a2, s3, a3, s4, a4
	call	fw_platform_init
	add	t0, a0, zero
	MOV_5R	a0, s0, a1, s1, a2, s2, a3, s3, a4, s4
	add	a1, t0, zero

	/* Preload HART details
	 * s7 -> HART Count
	 * s8 -> HART Stack Size
	 * s9 -> Heap Size
	 * s10 -> Heap Offset
	 */
	lla	a4, platform
#if __riscv_xlen > 32
	lwu	s7, SBI_PLATFORM_HART_COUNT_OFFSET(a4)
	lwu	s8, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(a4)
	lwu	s9, SBI_PLATFORM_HEAP_SIZE_OFFSET(a4)
#else
	lw	s7, SBI_PLATFORM_HART_COUNT_OFFSET(a4)
	lw	s8, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(a4)
	lw	s9, SBI_PLATFORM_HEAP_SIZE_OFFSET(a4)
#endif

	/* Setup scratch space for all the HARTs*/
	lla	tp, _fw_end
	mul	a5, s7, s8
	add	tp, tp, a5
	/* Setup heap base address */
	lla	s10, _fw_start
	sub	s10, tp, s10
	add	tp, tp, s9
	/* Keep a copy of tp */
	add	t3, tp, zero
	/* Counter */
	li	t2, 1
	/* hartid 0 is mandated by ISA */
	li	t1, 0
_scratch_init:
	/*
	 * The following registers hold values that are computed before
	 * entering this block, and should remain unchanged.
	 *
	 * t3 -> the firmware end address
	 * s7 -> HART count
	 * s8 -> HART stack size
	 * s9 -> Heap Size
	 * s10 -> Heap Offset
	 */
	add	tp, t3, zero
	sub	tp, tp, s9
	mul	a5, s8, t1
	sub	tp, tp, a5
	li	a5, SBI_SCRATCH_SIZE
	sub	tp, tp, a5

	/* Initialize scratch space */
	/* Store fw_start and fw_size in scratch space */
	lla	a4, _fw_start
	sub	a5, t3, a4
	REG_S	a4, SBI_SCRATCH_FW_START_OFFSET(tp)
	REG_S	a5, SBI_SCRATCH_FW_SIZE_OFFSET(tp)

	/* Store R/W section's offset in scratch space */
	lla	a5, _fw_rw_start
	sub	a5, a5, a4
	REG_S	a5, SBI_SCRATCH_FW_RW_OFFSET(tp)

	/* Store fw_heap_offset and fw_heap_size in scratch space */
	REG_S	s10, SBI_SCRATCH_FW_HEAP_OFFSET(tp)
	REG_S	s9, SBI_SCRATCH_FW_HEAP_SIZE_OFFSET(tp)

	/* Store next arg1 in scratch space */
	MOV_3R	s0, a0, s1, a1, s2, a2
	call	fw_next_arg1
	REG_S	a0, SBI_SCRATCH_NEXT_ARG1_OFFSET(tp)
	MOV_3R	a0, s0, a1, s1, a2, s2
	/* Store next address in scratch space */
	MOV_3R	s0, a0, s1, a1, s2, a2
	call	fw_next_addr
	REG_S	a0, SBI_SCRATCH_NEXT_ADDR_OFFSET(tp)
	MOV_3R	a0, s0, a1, s1, a2, s2
	/* Store next mode in scratch space */
	MOV_3R	s0, a0, s1, a1, s2, a2
	call	fw_next_mode
	REG_S	a0, SBI_SCRATCH_NEXT_MODE_OFFSET(tp)
	MOV_3R	a0, s0, a1, s1, a2, s2
	/* Store warm_boot address in scratch space */
	lla	a4, _start_warm
	REG_S	a4, SBI_SCRATCH_WARMBOOT_ADDR_OFFSET(tp)
	/* Store platform address in scratch space */
	lla	a4, platform
	REG_S	a4, SBI_SCRATCH_PLATFORM_ADDR_OFFSET(tp)
	/* Store hartid-to-scratch function address in scratch space */
	lla	a4, _hartid_to_scratch
	REG_S	a4, SBI_SCRATCH_HARTID_TO_SCRATCH_OFFSET(tp)
	/* Clear trap_context and tmp0 in scratch space */
	REG_S	zero, SBI_SCRATCH_TRAP_CONTEXT_OFFSET(tp)
	REG_S	zero, SBI_SCRATCH_TMP0_OFFSET(tp)
	/* Store firmware options in scratch space */
	MOV_3R	s0, a0, s1, a1, s2, a2
#ifdef FW_OPTIONS
	li	a0, FW_OPTIONS
#else
	call	fw_options
#endif
	REG_S	a0, SBI_SCRATCH_OPTIONS_OFFSET(tp)
	MOV_3R	a0, s0, a1, s1, a2, s2
	/* Move to next scratch space */
	add	t1, t1, t2
	blt	t1, s7, _scratch_init

	/*
	 * Relocate Flatened Device Tree (FDT)
	 * source FDT address = previous arg1
	 * destination FDT address = next arg1
	 *
	 * Note: We will preserve a0 and a1 passed by
	 * previous booting stage.
	 */
	beqz	a1, _fdt_reloc_done
	/* Mask values in a4 */
	li	a4, 0xff
	/* t1 = destination FDT start address */
	MOV_3R	s0, a0, s1, a1, s2, a2
	call	fw_next_arg1
	add	t1, a0, zero
	MOV_3R	a0, s0, a1, s1, a2, s2
	beqz	t1, _fdt_reloc_done
	beq	t1, a1, _fdt_reloc_done
	/* t0 = source FDT start address */
	add	t0, a1, zero
	/* t2 = source FDT size in big-endian */
#if __riscv_xlen > 32
	lwu	t2, 4(t0)
#else
	lw	t2, 4(t0)
#endif
	/* t3 = bit[15:8] of FDT size */
	add	t3, t2, zero
	srli	t3, t3, 16
	and	t3, t3, a4
	slli	t3, t3, 8
	/* t4 = bit[23:16] of FDT size */
	add	t4, t2, zero
	srli	t4, t4, 8
	and	t4, t4, a4
	slli	t4, t4, 16
	/* t5 = bit[31:24] of FDT size */
	add	t5, t2, zero
	and	t5, t5, a4
	slli	t5, t5, 24
	/* t2 = bit[7:0] of FDT size */
	srli	t2, t2, 24
	and	t2, t2, a4
	/* t2 = FDT size in little-endian */
	or	t2, t2, t3
	or	t2, t2, t4
	or	t2, t2, t5
	/* t2 = destination FDT end address */
	add	t2, t1, t2
	/* FDT copy loop */
	ble	t2, t1, _fdt_reloc_done
_fdt_reloc_again:
	REG_L	t3, 0(t0)
	REG_S	t3, 0(t1)
	add	t0, t0, __SIZEOF_POINTER__
	add	t1, t1, __SIZEOF_POINTER__
	blt	t1, t2, _fdt_reloc_again
_fdt_reloc_done:

	/* mark boot hart done */
	li	t0, BOOT_STATUS_BOOT_HART_DONE
	lla	t1, _boot_status
	fence	rw, rw
	REG_S	t0, 0(t1)
	j	_start_warm

	/* waiting for boot hart to be done (_boot_status == 2) */
_wait_for_boot_hart:
	li	t0, BOOT_STATUS_BOOT_HART_DONE
	lla	t1, _boot_status
	REG_L	t1, 0(t1)
	/* Reduce the bus traffic so that boot hart may proceed faster */
	div	t2, t2, zero
	div	t2, t2, zero
	div	t2, t2, zero
	bne	t0, t1, _wait_for_boot_hart

_start_warm:
	/* Reset all registers except ra, a0, a1, a2, a3 and a4 for non-boot HART */
	li	ra, 0
	call	_reset_regs

	/* Disable all interrupts */
	csrw	CSR_MIE, zero

	/* Find HART count and HART stack size */
	lla	a4, platform
#if __riscv_xlen > 32
	lwu	s7, SBI_PLATFORM_HART_COUNT_OFFSET(a4)
	lwu	s8, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(a4)
#else
	lw	s7, SBI_PLATFORM_HART_COUNT_OFFSET(a4)
	lw	s8, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(a4)
#endif
	REG_L	s9, SBI_PLATFORM_HART_INDEX2ID_OFFSET(a4)

	/* Find HART id */
	csrr	s6, CSR_MHARTID

	/* Find HART index */
	beqz	s9, 3f
	li	a4, 0
1:
#if __riscv_xlen > 32
	lwu	a5, (s9)
#else
	lw	a5, (s9)
#endif
	beq	a5, s6, 2f
	add	s9, s9, 4
	add	a4, a4, 1
	blt	a4, s7, 1b
2:	add	s6, a4, zero
3:	bge	s6, s7, _start_hang

	/* Find the scratch space based on HART index */
	lla	tp, _fw_end
	mul	a5, s7, s8
	add	tp, tp, a5
	mul	a5, s8, s6
	sub	tp, tp, a5
	li	a5, SBI_SCRATCH_SIZE
	sub	tp, tp, a5

	/* update the mscratch */
	csrw	CSR_MSCRATCH, tp

	/* Setup stack */
	add	sp, tp, zero

	/* Setup trap handler */
	lla	a4, _trap_handler
	csrr	a5, CSR_MISA
	srli	a5, a5, ('H' - 'A')
	andi	a5, a5, 0x1
	beq	a5, zero, _skip_trap_handler_hyp
	lla	a4, _trap_handler_hyp
_skip_trap_handler_hyp:
	csrw	CSR_MTVEC, a4

	/* Initialize SBI runtime */
	csrr	a0, CSR_MSCRATCH
	call	sbi_init

	/* We don't expect to reach here hence just hang */
	j	_start_hang

	.data
	.align 3
_boot_status:
	RISCV_PTR	0

	.section .entry, "ax", %progbits
	.align 3
	.globl _hartid_to_scratch
_hartid_to_scratch:
	/*
	 * a0 -> HART ID (passed by caller)
	 * a1 -> HART Index (passed by caller)
	 * t0 -> HART Stack Size
	 * t1 -> HART Stack End
	 * t2 -> Temporary
	 */
	lla	t2, platform
#if __riscv_xlen > 32
	lwu	t0, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(t2)
	lwu	t2, SBI_PLATFORM_HART_COUNT_OFFSET(t2)
#else
	lw	t0, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(t2)
	lw	t2, SBI_PLATFORM_HART_COUNT_OFFSET(t2)
#endif
	sub	t2, t2, a1
	mul	t2, t2, t0
	lla	t1, _fw_end
	add	t1, t1, t2
	li	t2, SBI_SCRATCH_SIZE
	sub	a0, t1, t2
	ret

	.section .entry, "ax", %progbits
	.align 3
	.globl _start_hang
_start_hang:
	wfi
	j	_start_hang

	.section .entry, "ax", %progbits
	.align 3
	.weak fw_platform_init
fw_platform_init:
	add	a0, a1, zero
	ret

	/* Map implicit memcpy() added by compiler to sbi_memcpy() */
	.section .text
	.align 3
	.globl memcpy
memcpy:
	tail	sbi_memcpy

	/* Map implicit memset() added by compiler to sbi_memset() */
	.section .text
	.align 3
	.globl memset
memset:
	tail	sbi_memset

	/* Map implicit memmove() added by compiler to sbi_memmove() */
	.section .text
	.align 3
	.globl memmove
memmove:
	tail	sbi_memmove

	/* Map implicit memcmp() added by compiler to sbi_memcmp() */
	.section .text
	.align 3
	.globl memcmp
memcmp:
	tail	sbi_memcmp

.macro	TRAP_SAVE_AND_SETUP_SP_T0
	/* Swap TP and MSCRATCH */
	csrrw	tp, CSR_MSCRATCH, tp

	/* Save T0 in scratch space */
	REG_S	t0, SBI_SCRATCH_TMP0_OFFSET(tp)

	/*
	 * Set T0 to appropriate exception stack
	 *
	 * Came_From_M_Mode = ((MSTATUS.MPP < PRV_M) ? 1 : 0) - 1;
	 * Exception_Stack = TP ^ (Came_From_M_Mode & (SP ^ TP))
	 *
	 * Came_From_M_Mode = 0    ==>    Exception_Stack = TP
	 * Came_From_M_Mode = -1   ==>    Exception_Stack = SP
	 */
	csrr	t0, CSR_MSTATUS
	srl	t0, t0, MSTATUS_MPP_SHIFT
	and	t0, t0, PRV_M
	slti	t0, t0, PRV_M
	add	t0, t0, -1
	xor	sp, sp, tp
	and	t0, t0, sp
	xor	sp, sp, tp
	xor	t0, tp, t0

	/* Save original SP on exception stack */
	REG_S	sp, (SBI_TRAP_REGS_OFFSET(sp) - SBI_TRAP_CONTEXT_SIZE)(t0)

	/* Set SP to exception stack and make room for trap context */
	add	sp, t0, -(SBI_TRAP_CONTEXT_SIZE)

	/* Restore T0 from scratch space */
	REG_L	t0, SBI_SCRATCH_TMP0_OFFSET(tp)

	/* Save T0 on stack */
	REG_S	t0, SBI_TRAP_REGS_OFFSET(t0)(sp)

	/* Swap TP and MSCRATCH */
	csrrw	tp, CSR_MSCRATCH, tp
.endm

.macro	TRAP_SAVE_MEPC_MSTATUS have_mstatush
	/* Save MEPC and MSTATUS CSRs */
	csrr	t0, CSR_MEPC
	REG_S	t0, SBI_TRAP_REGS_OFFSET(mepc)(sp)
	csrr	t0, CSR_MSTATUS
	REG_S	t0, SBI_TRAP_REGS_OFFSET(mstatus)(sp)
	.if \have_mstatush
	csrr	t0, CSR_MSTATUSH
	REG_S	t0, SBI_TRAP_REGS_OFFSET(mstatusH)(sp)
	.else
	REG_S	zero, SBI_TRAP_REGS_OFFSET(mstatusH)(sp)
	.endif
.endm

.macro	TRAP_SAVE_GENERAL_REGS_EXCEPT_SP_T0
	/* Save all general regisers except SP and T0 */
	REG_S	zero, SBI_TRAP_REGS_OFFSET(zero)(sp)
	REG_S	ra, SBI_TRAP_REGS_OFFSET(ra)(sp)
	REG_S	gp, SBI_TRAP_REGS_OFFSET(gp)(sp)
	REG_S	tp, SBI_TRAP_REGS_OFFSET(tp)(sp)
	REG_S	t1, SBI_TRAP_REGS_OFFSET(t1)(sp)
	REG_S	t2, SBI_TRAP_REGS_OFFSET(t2)(sp)
	REG_S	s0, SBI_TRAP_REGS_OFFSET(s0)(sp)
	REG_S	s1, SBI_TRAP_REGS_OFFSET(s1)(sp)
	REG_S	a0, SBI_TRAP_REGS_OFFSET(a0)(sp)
	REG_S	a1, SBI_TRAP_REGS_OFFSET(a1)(sp)
	REG_S	a2, SBI_TRAP_REGS_OFFSET(a2)(sp)
	REG_S	a3, SBI_TRAP_REGS_OFFSET(a3)(sp)
	REG_S	a4, SBI_TRAP_REGS_OFFSET(a4)(sp)
	REG_S	a5, SBI_TRAP_REGS_OFFSET(a5)(sp)
	REG_S	a6, SBI_TRAP_REGS_OFFSET(a6)(sp)
	REG_S	a7, SBI_TRAP_REGS_OFFSET(a7)(sp)
	REG_S	s2, SBI_TRAP_REGS_OFFSET(s2)(sp)
	REG_S	s3, SBI_TRAP_REGS_OFFSET(s3)(sp)
	REG_S	s4, SBI_TRAP_REGS_OFFSET(s4)(sp)
	REG_S	s5, SBI_TRAP_REGS_OFFSET(s5)(sp)
	REG_S	s6, SBI_TRAP_REGS_OFFSET(s6)(sp)
	REG_S	s7, SBI_TRAP_REGS_OFFSET(s7)(sp)
	REG_S	s8, SBI_TRAP_REGS_OFFSET(s8)(sp)
	REG_S	s9, SBI_TRAP_REGS_OFFSET(s9)(sp)
	REG_S	s10, SBI_TRAP_REGS_OFFSET(s10)(sp)
	REG_S	s11, SBI_TRAP_REGS_OFFSET(s11)(sp)
	REG_S	t3, SBI_TRAP_REGS_OFFSET(t3)(sp)
	REG_S	t4, SBI_TRAP_REGS_OFFSET(t4)(sp)
	REG_S	t5, SBI_TRAP_REGS_OFFSET(t5)(sp)
	REG_S	t6, SBI_TRAP_REGS_OFFSET(t6)(sp)
.endm

.macro	TRAP_SAVE_INFO have_mstatush have_h_extension
	csrr	t0, CSR_MCAUSE
	REG_S	t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(cause))(sp)
	csrr	t0, CSR_MTVAL
	REG_S	t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tval))(sp)
.if \have_h_extension
	csrr	t0, CSR_MTVAL2
	REG_S	t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tval2))(sp)
	csrr	t0, CSR_MTINST
	REG_S	t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tinst))(sp)
	.if \have_mstatush
	csrr	t0, CSR_MSTATUSH
	srli	t0, t0, MSTATUSH_GVA_SHIFT
	.else
	csrr	t0, CSR_MSTATUS
	srli	t0, t0, MSTATUS_GVA_SHIFT
	.endif
	and	t0, t0, 0x1
.else
	REG_S	zero, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tval2))(sp)
	REG_S	zero, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tinst))(sp)
	li	t0, 0
.endif
	REG_S	t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(gva))(sp)
.endm

.macro	TRAP_CALL_C_ROUTINE
	/* Call C routine */
	add	a0, sp, zero
	call	sbi_trap_handler
.endm

.macro	TRAP_RESTORE_GENERAL_REGS_EXCEPT_A0_T0
	/* Restore all general regisers except A0 and T0 */
	REG_L	ra, SBI_TRAP_REGS_OFFSET(ra)(a0)
	REG_L	sp, SBI_TRAP_REGS_OFFSET(sp)(a0)
	REG_L	gp, SBI_TRAP_REGS_OFFSET(gp)(a0)
	REG_L	tp, SBI_TRAP_REGS_OFFSET(tp)(a0)
	REG_L	t1, SBI_TRAP_REGS_OFFSET(t1)(a0)
	REG_L	t2, SBI_TRAP_REGS_OFFSET(t2)(a0)
	REG_L	s0, SBI_TRAP_REGS_OFFSET(s0)(a0)
	REG_L	s1, SBI_TRAP_REGS_OFFSET(s1)(a0)
	REG_L	a1, SBI_TRAP_REGS_OFFSET(a1)(a0)
	REG_L	a2, SBI_TRAP_REGS_OFFSET(a2)(a0)
	REG_L	a3, SBI_TRAP_REGS_OFFSET(a3)(a0)
	REG_L	a4, SBI_TRAP_REGS_OFFSET(a4)(a0)
	REG_L	a5, SBI_TRAP_REGS_OFFSET(a5)(a0)
	REG_L	a6, SBI_TRAP_REGS_OFFSET(a6)(a0)
	REG_L	a7, SBI_TRAP_REGS_OFFSET(a7)(a0)
	REG_L	s2, SBI_TRAP_REGS_OFFSET(s2)(a0)
	REG_L	s3, SBI_TRAP_REGS_OFFSET(s3)(a0)
	REG_L	s4, SBI_TRAP_REGS_OFFSET(s4)(a0)
	REG_L	s5, SBI_TRAP_REGS_OFFSET(s5)(a0)
	REG_L	s6, SBI_TRAP_REGS_OFFSET(s6)(a0)
	REG_L	s7, SBI_TRAP_REGS_OFFSET(s7)(a0)
	REG_L	s8, SBI_TRAP_REGS_OFFSET(s8)(a0)
	REG_L	s9, SBI_TRAP_REGS_OFFSET(s9)(a0)
	REG_L	s10, SBI_TRAP_REGS_OFFSET(s10)(a0)
	REG_L	s11, SBI_TRAP_REGS_OFFSET(s11)(a0)
	REG_L	t3, SBI_TRAP_REGS_OFFSET(t3)(a0)
	REG_L	t4, SBI_TRAP_REGS_OFFSET(t4)(a0)
	REG_L	t5, SBI_TRAP_REGS_OFFSET(t5)(a0)
	REG_L	t6, SBI_TRAP_REGS_OFFSET(t6)(a0)
.endm

.macro	TRAP_RESTORE_MEPC_MSTATUS have_mstatush
	/* Restore MEPC and MSTATUS CSRs */
	REG_L	t0, SBI_TRAP_REGS_OFFSET(mepc)(a0)
	csrw	CSR_MEPC, t0
	REG_L	t0, SBI_TRAP_REGS_OFFSET(mstatus)(a0)
	csrw	CSR_MSTATUS, t0
	.if \have_mstatush
	REG_L	t0, SBI_TRAP_REGS_OFFSET(mstatusH)(a0)
	csrw	CSR_MSTATUSH, t0
	.endif
.endm

.macro TRAP_RESTORE_A0_T0
	/* Restore T0 */
	REG_L	t0, SBI_TRAP_REGS_OFFSET(t0)(a0)

	/* Restore A0 */
	REG_L	a0, SBI_TRAP_REGS_OFFSET(a0)(a0)
.endm

	.section .entry, "ax", %progbits
	.align 3
	.globl _trap_handler
_trap_handler:
	TRAP_SAVE_AND_SETUP_SP_T0

	TRAP_SAVE_MEPC_MSTATUS 0

	TRAP_SAVE_GENERAL_REGS_EXCEPT_SP_T0

	TRAP_SAVE_INFO 0 0

	TRAP_CALL_C_ROUTINE

	TRAP_RESTORE_GENERAL_REGS_EXCEPT_A0_T0

	TRAP_RESTORE_MEPC_MSTATUS 0

	TRAP_RESTORE_A0_T0

	mret

	.section .entry, "ax", %progbits
	.align 3
	.globl _trap_handler_hyp
_trap_handler_hyp:
	TRAP_SAVE_AND_SETUP_SP_T0

#if __riscv_xlen == 32
	TRAP_SAVE_MEPC_MSTATUS 1
#else
	TRAP_SAVE_MEPC_MSTATUS 0
#endif

	TRAP_SAVE_GENERAL_REGS_EXCEPT_SP_T0

#if __riscv_xlen == 32
	TRAP_SAVE_INFO 1 1
#else
	TRAP_SAVE_INFO 0 1
#endif

	TRAP_CALL_C_ROUTINE

	TRAP_RESTORE_GENERAL_REGS_EXCEPT_A0_T0

#if __riscv_xlen == 32
	TRAP_RESTORE_MEPC_MSTATUS 1
#else
	TRAP_RESTORE_MEPC_MSTATUS 0
#endif

	TRAP_RESTORE_A0_T0

	mret

	.section .entry, "ax", %progbits
	.align 3
	.globl _reset_regs
_reset_regs:

	/* flush the instruction cache */
	fence.i
	/* Reset all registers except ra, a0, a1, a2, a3 and a4 */
	li sp, 0
	li gp, 0
	li tp, 0
	li t0, 0
	li t1, 0
	li t2, 0
	li s0, 0
	li s1, 0
	li a5, 0
	li a6, 0
	li a7, 0
	li s2, 0
	li s3, 0
	li s4, 0
	li s5, 0
	li s6, 0
	li s7, 0
	li s8, 0
	li s9, 0
	li s10, 0
	li s11, 0
	li t3, 0
	li t4, 0
	li t5, 0
	li t6, 0
	csrw CSR_MSCRATCH, 0

	ret

#ifdef FW_FDT_PATH
	.section .rodata
	.align 4
	.globl fw_fdt_bin
fw_fdt_bin:
	.incbin FW_FDT_PATH
#ifdef FW_FDT_PADDING
	.fill FW_FDT_PADDING, 1, 0
#endif
#endif