#!/usr/bin/env python3

# Copyright 2012-2016 The Meson development team

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     http://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from glob import glob
import os, subprocess, shutil, sys, signal
from io import StringIO
from ast import literal_eval
from enum import Enum
import tempfile
import mesontest
from mesonbuild import environment
from mesonbuild import mesonlib
from mesonbuild import mlog
from mesonbuild import mesonmain
from mesonbuild.mesonlib import stringlistify, Popen_safe
from mesonbuild.coredata import backendlist
import argparse
import xml.etree.ElementTree as ET
import time
import multiprocessing
import concurrent.futures as conc
import re

from run_tests import get_backend_commands, get_backend_args_for_dir, Backend


class BuildStep(Enum):
    configure = 1
    build = 2
    test = 3
    install = 4
    clean = 5
    validate = 6


class TestResult:
    def __init__(self, msg, step, stdo, stde, mlog, conftime=0, buildtime=0, testtime=0):
        self.msg = msg
        self.step = step
        self.stdo = stdo
        self.stde = stde
        self.mlog = mlog
        self.conftime = conftime
        self.buildtime = buildtime
        self.testtime = testtime

class DummyFuture(conc.Future):
    '''
    Dummy Future implementation that executes the provided function when you
    ask for the result. Used on platforms where sem_open() is not available:
    MSYS2, OpenBSD, etc: https://bugs.python.org/issue3770
    '''
    def __init__(self, *args, **kwargs):
        super().__init__(*args, **kwargs)

    def set_function(self, fn, *args, **kwargs):
        self.fn = fn
        self.fn_args = args
        self.fn_kwargs = kwargs

    def result(self, **kwargs):
        try:
            result = self.fn(*self.fn_args, **self.fn_kwargs)
        except BaseException as e:
            self.set_exception(e)
        else:
            self.set_result(result)
        return super().result(**kwargs)


class DummyExecutor(conc.Executor):
    '''
    Dummy single-thread 'concurrent' executor for use on platforms where
    sem_open is not available: https://bugs.python.org/issue3770
    '''

    def __init__(self):
        from threading import Lock
        self._shutdown = False
        self._shutdownLock = Lock()

    def submit(self, fn, *args, **kwargs):
        with self._shutdownLock:
            if self._shutdown:
                raise RuntimeError('Cannot schedule new futures after shutdown')
            f = DummyFuture()
            f.set_function(fn, *args, **kwargs)
            return f

    def shutdown(self, wait=True):
        with self._shutdownLock:
            self._shutdown = True


class AutoDeletedDir:
    def __init__(self, d):
        self.dir = d

    def __enter__(self):
        os.makedirs(self.dir, exist_ok=True)
        return self.dir

    def __exit__(self, _type, value, traceback):
        # On Windows, shutil.rmtree fails sometimes, because 'the directory is not empty'.
        # Retrying fixes this.
        # That's why we don't use tempfile.TemporaryDirectory, but wrap the deletion in the AutoDeletedDir class.
        retries = 5
        for i in range(0, retries):
            try:
                shutil.rmtree(self.dir)
                return
            # Sometimes we get: ValueError: I/O operation on closed file.
            except ValueError:
                return
            # Deleting can raise OSError or PermissionError on Windows
            # (most likely because of anti-virus locking the file)
            except (OSError, PermissionError):
                if i == retries - 1:
                    mlog.warning('Could not delete temporary directory.')
                    return
                time.sleep(0.1 * (2**i))

failing_logs = []
print_debug = 'MESON_PRINT_TEST_OUTPUT' in os.environ
do_debug = not {'MESON_PRINT_TEST_OUTPUT', 'TRAVIS', 'APPVEYOR'}.isdisjoint(os.environ)
no_meson_log_msg = 'No meson-log.txt found.'

meson_command = os.path.join(os.getcwd(), 'meson')
if not os.path.exists(meson_command):
    meson_command += '.py'
    if not os.path.exists(meson_command):
        raise RuntimeError('Could not find main Meson script to run.')

class StopException(Exception):
    def __init__(self):
        super().__init__('Stopped by user')

stop = False
def stop_handler(signal, frame):
    global stop
    stop = True
signal.signal(signal.SIGINT, stop_handler)
signal.signal(signal.SIGTERM, stop_handler)

# Needed when running cross tests because we don't generate prebuilt files
compiler = None

def setup_commands(optbackend):
    global do_debug, backend, backend_flags
    global compile_commands, clean_commands, test_commands, install_commands, uninstall_commands
    backend = optbackend
    msbuild_exe = shutil.which('msbuild')
    # Auto-detect backend if unspecified
    if backend is None:
        if msbuild_exe is not None:
            backend = 'vs' # Meson will auto-detect VS version to use
        elif mesonlib.is_osx():
            backend = 'xcode'
        else:
            backend = 'ninja'
    # Set backend arguments for Meson
    if backend.startswith('vs'):
        backend_flags = ['--backend=' + backend]
        backend = Backend.vs
    elif backend == 'xcode':
        backend_flags = ['--backend=xcode']
        backend = Backend.xcode
    elif backend == 'ninja':
        backend_flags = ['--backend=ninja']
        backend = Backend.ninja
    else:
        raise RuntimeError('Unknown backend: {!r}'.format(backend))
    compile_commands, clean_commands, test_commands, install_commands, \
        uninstall_commands = get_backend_commands(backend, do_debug)

def get_relative_files_list_from_dir(fromdir):
    paths = []
    for (root, _, files) in os.walk(fromdir):
        reldir = os.path.relpath(root, start=fromdir)
        for f in files:
            path = os.path.join(reldir, f).replace('\\', '/')
            if path.startswith('./'):
                path = path[2:]
            paths.append(path)
    return paths

def platform_fix_name(fname):
    if '?lib' in fname:
        if mesonlib.is_cygwin():
            fname = re.sub(r'\?lib(.*)\.dll$', r'cyg\1.dll', fname)
        else:
            fname = re.sub(r'\?lib', 'lib', fname)

    if fname.endswith('?exe'):
        fname = fname[:-4]
        if mesonlib.is_windows() or mesonlib.is_cygwin():
            return fname + '.exe'

    return fname

def validate_install(srcdir, installdir, compiler):
    # List of installed files
    info_file = os.path.join(srcdir, 'installed_files.txt')
    # If this exists, the test does not install any other files
    noinst_file = 'usr/no-installed-files'
    expected = {}
    found = {}
    ret_msg = ''
    # Generate list of expected files
    if os.path.exists(os.path.join(installdir, noinst_file)):
        expected[noinst_file] = False
    elif os.path.exists(info_file):
        with open(info_file) as f:
            for line in f:
                expected[platform_fix_name(line.strip())] = False
    # Check if expected files were found
    for fname in expected:
        if os.path.exists(os.path.join(installdir, fname)):
            expected[fname] = True
    for (fname, found) in expected.items():
        if not found:
            # Ignore missing PDB files if we aren't using cl
            if fname.endswith('.pdb') and compiler != 'cl':
                continue
            ret_msg += 'Expected file {0} missing.\n'.format(fname)
    # Check if there are any unexpected files
    found = get_relative_files_list_from_dir(installdir)
    for fname in found:
        # Windows-specific tests check for the existence of installed PDB
        # files, but common tests do not, for obvious reasons. Ignore any
        # extra PDB files found.
        if fname not in expected and not fname.endswith('.pdb') and compiler == 'cl':
            ret_msg += 'Extra file {0} found.\n'.format(fname)
    return ret_msg

def log_text_file(logfile, testdir, stdo, stde):
    global stop, executor, futures
    logfile.write('%s\nstdout\n\n---\n' % testdir)
    logfile.write(stdo)
    logfile.write('\n\n---\n\nstderr\n\n---\n')
    logfile.write(stde)
    logfile.write('\n\n---\n\n')
    if print_debug:
        print(stdo)
        print(stde, file=sys.stderr)
    if stop:
        print("Aborting..")
        for f in futures:
            f[2].cancel()
        executor.shutdown()
        raise StopException()

def run_configure_inprocess(commandlist):
    old_stdout = sys.stdout
    sys.stdout = mystdout = StringIO()
    old_stderr = sys.stderr
    sys.stderr = mystderr = StringIO()
    try:
        returncode = mesonmain.run(commandlist[0], commandlist[1:])
    finally:
        sys.stdout = old_stdout
        sys.stderr = old_stderr
    return returncode, mystdout.getvalue(), mystderr.getvalue()

def run_test_inprocess(testdir):
    old_stdout = sys.stdout
    sys.stdout = mystdout = StringIO()
    old_stderr = sys.stderr
    sys.stderr = mystderr = StringIO()
    old_cwd = os.getcwd()
    os.chdir(testdir)
    try:
        returncode_test = mesontest.run(['--no-rebuild'])
        returncode_benchmark = mesontest.run(['--no-rebuild', '--benchmark', '--logbase', 'benchmarklog'])
    finally:
        sys.stdout = old_stdout
        sys.stderr = old_stderr
        os.chdir(old_cwd)
    return max(returncode_test, returncode_benchmark), mystdout.getvalue(), mystderr.getvalue()

def parse_test_args(testdir):
    args = []
    try:
        with open(os.path.join(testdir, 'test_args.txt'), 'r') as f:
            content = f.read()
            try:
                args = literal_eval(content)
            except Exception:
                raise Exception('Malformed test_args file.')
            args = stringlistify(args)
    except FileNotFoundError:
        pass
    return args

def run_test(skipped, testdir, extra_args, compiler, backend, flags, commands, should_fail):
    if skipped:
        return None
    with AutoDeletedDir(tempfile.mkdtemp(prefix='b ', dir='.')) as build_dir:
        with AutoDeletedDir(tempfile.mkdtemp(prefix='i ', dir=os.getcwd())) as install_dir:
            try:
                return _run_test(testdir, build_dir, install_dir, extra_args, compiler, backend, flags, commands, should_fail)
            finally:
                mlog.shutdown() # Close the log file because otherwise Windows wets itself.

def _run_test(testdir, test_build_dir, install_dir, extra_args, compiler, backend, flags, commands, should_fail):
    compile_commands, clean_commands, install_commands, uninstall_commands = commands
    test_args = parse_test_args(testdir)
    gen_start = time.time()
    # Configure in-process
    gen_command = [meson_command, '--prefix', '/usr', '--libdir', 'lib', testdir, test_build_dir]\
        + flags + test_args + extra_args
    (returncode, stdo, stde) = run_configure_inprocess(gen_command)
    try:
        logfile = os.path.join(test_build_dir, 'meson-logs/meson-log.txt')
        with open(logfile, errors='ignore') as f:
            mesonlog = f.read()
    except Exception:
        mesonlog = no_meson_log_msg
    gen_time = time.time() - gen_start
    if should_fail == 'meson':
        if returncode != 0:
            return TestResult('', BuildStep.configure, stdo, stde, mesonlog, gen_time)
        return TestResult('Test that should have failed succeeded', BuildStep.configure, stdo, stde, mesonlog, gen_time)
    if returncode != 0:
        return TestResult('Generating the build system failed.', BuildStep.configure, stdo, stde, mesonlog, gen_time)
    # Build with subprocess
    dir_args = get_backend_args_for_dir(backend, test_build_dir)
    build_start = time.time()
    pc, o, e = Popen_safe(compile_commands + dir_args, cwd=test_build_dir)
    build_time = time.time() - build_start
    stdo += o
    stde += e
    if should_fail == 'build':
        if pc.returncode != 0:
            return TestResult('', BuildStep.build, stdo, stde, mesonlog, gen_time)
        return TestResult('Test that should have failed to build succeeded', BuildStep.build, stdo, stde, mesonlog, gen_time)
    if pc.returncode != 0:
        return TestResult('Compiling source code failed.', BuildStep.build, stdo, stde, mesonlog, gen_time, build_time)
    # Touch the meson.build file to force a regenerate so we can test that
    # regeneration works. We need to sleep for 0.2s because Ninja tracks mtimes
    # at a low resolution: https://github.com/ninja-build/ninja/issues/371
    time.sleep(0.2)
    os.utime(os.path.join(testdir, 'meson.build'))
    test_start = time.time()
    # Test in-process
    (returncode, tstdo, tstde) = run_test_inprocess(test_build_dir)
    test_time = time.time() - test_start
    stdo += tstdo
    stde += tstde
    if should_fail == 'test':
        if returncode != 0:
            return TestResult('', BuildStep.test, stdo, stde, mesonlog, gen_time)
        return TestResult('Test that should have failed to run unit tests succeeded', BuildStep.test, stdo, stde, mesonlog, gen_time)
    if returncode != 0:
        return TestResult('Running unit tests failed.', BuildStep.test, stdo, stde, mesonlog, gen_time, build_time, test_time)
    # Do installation, if the backend supports it
    if len(install_commands) != 0:
        env = os.environ.copy()
        env['DESTDIR'] = install_dir
        # Install with subprocess
        pi, o, e = Popen_safe(install_commands, cwd=test_build_dir, env=env)
        stdo += o
        stde += e
        if pi.returncode != 0:
            return TestResult('Running install failed.', BuildStep.install, stdo, stde, mesonlog, gen_time, build_time, test_time)
    # Clean with subprocess
    env = os.environ.copy()
    pi, o, e = Popen_safe(clean_commands + dir_args, cwd=test_build_dir, env=env)
    stdo += o
    stde += e
    if pi.returncode != 0:
        return TestResult('Running clean failed.', BuildStep.clean, stdo, stde, mesonlog, gen_time, build_time, test_time)
    if len(install_commands) == 0:
        return TestResult('', BuildStep.install, '', '', mesonlog, gen_time, build_time, test_time)
    return TestResult(validate_install(testdir, install_dir, compiler), BuildStep.validate, stdo, stde, mesonlog, gen_time, build_time, test_time)

def gather_tests(testdir):
    tests = [t.replace('\\', '/').split('/', 2)[2] for t in glob(os.path.join(testdir, '*'))]
    testlist = [(int(t.split()[0]), t) for t in tests]
    testlist.sort()
    tests = [os.path.join(testdir, t[1]) for t in testlist]
    return tests

def have_d_compiler():
    if shutil.which("ldc2"):
        return True
    elif shutil.which("ldc"):
        return True
    elif shutil.which("gdc"):
        return True
    elif shutil.which("dmd"):
        return True
    return False

def have_java():
    if shutil.which('javac') and shutil.which('java'):
        return True
    return False

def detect_tests_to_run():
    all_tests = []
    all_tests.append(('common', gather_tests('test cases/common'), False))
    all_tests.append(('failing-meson', gather_tests('test cases/failing'), False))
    all_tests.append(('failing-build', gather_tests('test cases/failing build'), False))
    all_tests.append(('failing-tests', gather_tests('test cases/failing tests'), False))
    all_tests.append(('prebuilt', gather_tests('test cases/prebuilt'), False))

    all_tests.append(('platform-osx', gather_tests('test cases/osx'), False if mesonlib.is_osx() else True))
    all_tests.append(('platform-windows', gather_tests('test cases/windows'), False if mesonlib.is_windows() or mesonlib.is_cygwin() else True))
    all_tests.append(('platform-linux', gather_tests('test cases/linuxlike'), False if not (mesonlib.is_osx() or mesonlib.is_windows()) else True))
    all_tests.append(('framework', gather_tests('test cases/frameworks'), False if not mesonlib.is_osx() and not mesonlib.is_windows() and not mesonlib.is_cygwin() else True))
    all_tests.append(('java', gather_tests('test cases/java'), False if backend is Backend.ninja and not mesonlib.is_osx() and have_java() else True))
    all_tests.append(('C#', gather_tests('test cases/csharp'), False if backend is Backend.ninja and shutil.which('mcs') else True))
    all_tests.append(('vala', gather_tests('test cases/vala'), False if backend is Backend.ninja and shutil.which('valac') else True))
    all_tests.append(('rust', gather_tests('test cases/rust'), False if backend is Backend.ninja and shutil.which('rustc') else True))
    all_tests.append(('d', gather_tests('test cases/d'), False if backend is Backend.ninja and have_d_compiler() else True))
    all_tests.append(('objective c', gather_tests('test cases/objc'), False if backend in (Backend.ninja, Backend.xcode) and not mesonlib.is_windows() else True))
    all_tests.append(('fortran', gather_tests('test cases/fortran'), False if backend is Backend.ninja and shutil.which('gfortran') else True))
    all_tests.append(('swift', gather_tests('test cases/swift'), False if backend in (Backend.ninja, Backend.xcode) and shutil.which('swiftc') else True))
    all_tests.append(('python3', gather_tests('test cases/python3'), False if backend is Backend.ninja and shutil.which('python3') else True))
    return all_tests

def run_tests(all_tests, log_name_base, extra_args):
    global stop, executor, futures
    txtname = log_name_base + '.txt'
    xmlname = log_name_base + '.xml'
    logfile = open(txtname, 'w', encoding="utf_8")
    junit_root = ET.Element('testsuites')
    conf_time = 0
    build_time = 0
    test_time = 0
    passing_tests = 0
    failing_tests = 0
    skipped_tests = 0
    commands = (compile_commands, clean_commands, install_commands, uninstall_commands)

    try:
        # This fails in some CI environments for unknown reasons.
        num_workers = multiprocessing.cpu_count()
    except Exception as e:
        print('Could not determine number of CPUs due to the following reason:' + str(e))
        print('Defaulting to using only one process')
        num_workers = 1
    try:
        executor = conc.ProcessPoolExecutor(max_workers=num_workers)
    except ImportError:
        print('Platform doesn\'t ProcessPoolExecutor, falling back to single-threaded testing\n')
        executor = DummyExecutor()

    for name, test_cases, skipped in all_tests:
        current_suite = ET.SubElement(junit_root, 'testsuite', {'name': name, 'tests': str(len(test_cases))})
        if skipped:
            print('\nNot running %s tests.\n' % name)
        else:
            print('\nRunning %s tests.\n' % name)
        futures = []
        for t in test_cases:
            # Jenkins screws us over by automatically sorting test cases by name
            # and getting it wrong by not doing logical number sorting.
            (testnum, testbase) = os.path.split(t)[-1].split(' ', 1)
            testname = '%.3d %s' % (int(testnum), testbase)
            should_fail = False
            if name.startswith('failing'):
                should_fail = name.split('failing-')[1]
            result = executor.submit(run_test, skipped, t, extra_args, compiler, backend, backend_flags, commands, should_fail)
            futures.append((testname, t, result))
        for (testname, t, result) in futures:
            sys.stdout.flush()
            result = result.result()
            if result is None or 'MESON_SKIP_TEST' in result.stdo:
                print('Skipping:', t)
                current_test = ET.SubElement(current_suite, 'testcase', {'name': testname,
                                                                         'classname': name})
                ET.SubElement(current_test, 'skipped', {})
                skipped_tests += 1
            else:
                without_install = "" if len(install_commands) > 0 else " (without install)"
                if result.msg != '':
                    print('Failed test{} during {}: {!r}'.format(without_install, result.step.name, t))
                    print('Reason:', result.msg)
                    failing_tests += 1
                    if result.step == BuildStep.configure and result.mlog != no_meson_log_msg:
                        # For configure failures, instead of printing stdout,
                        # print the meson log if available since it's a superset
                        # of stdout and often has very useful information.
                        failing_logs.append(result.mlog)
                    else:
                        failing_logs.append(result.stdo)
                    failing_logs.append(result.stde)
                else:
                    print('Succeeded test%s: %s' % (without_install, t))
                    passing_tests += 1
                conf_time += result.conftime
                build_time += result.buildtime
                test_time += result.testtime
                total_time = conf_time + build_time + test_time
                log_text_file(logfile, t, result.stdo, result.stde)
                current_test = ET.SubElement(current_suite, 'testcase', {'name': testname,
                                                                         'classname': name,
                                                                         'time': '%.3f' % total_time})
                if result.msg != '':
                    ET.SubElement(current_test, 'failure', {'message': result.msg})
                stdoel = ET.SubElement(current_test, 'system-out')
                stdoel.text = result.stdo
                stdeel = ET.SubElement(current_test, 'system-err')
                stdeel.text = result.stde
    print("\nTotal configuration time: %.2fs" % conf_time)
    print("Total build time: %.2fs" % build_time)
    print("Total test time: %.2fs" % test_time)
    ET.ElementTree(element=junit_root).write(xmlname, xml_declaration=True, encoding='UTF-8')
    return passing_tests, failing_tests, skipped_tests

def check_file(fname):
    linenum = 1
    with open(fname, 'rb') as f:
        lines = f.readlines()
    for line in lines:
        if b'\t' in line:
            print("File %s contains a literal tab on line %d. Only spaces are permitted." % (fname, linenum))
            sys.exit(1)
        if b'\r' in line:
            print("File %s contains DOS line ending on line %d. Only unix-style line endings are permitted." % (fname, linenum))
            sys.exit(1)
        linenum += 1

def check_format():
    for (root, _, files) in os.walk('.'):
        for file in files:
            if file.endswith('.py') or file.endswith('.build') or file == 'meson_options.txt':
                fullname = os.path.join(root, file)
                check_file(fullname)

def pbcompile(compiler, source, objectfile):
    if compiler == 'cl':
        cmd = [compiler, '/nologo', '/Fo' + objectfile, '/c', source]
    else:
        cmd = [compiler, '-c', source, '-o', objectfile]
    subprocess.check_call(cmd, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)

def generate_pb_object(compiler, object_suffix):
    source = 'test cases/prebuilt/1 object/source.c'
    objectfile = 'test cases/prebuilt/1 object/prebuilt.' + object_suffix
    pbcompile(compiler, source, objectfile)
    return objectfile

def generate_pb_static(compiler, object_suffix, static_suffix):
    source = 'test cases/prebuilt/2 static/libdir/best.c'
    objectfile = 'test cases/prebuilt/2 static/libdir/best.' + object_suffix
    stlibfile = 'test cases/prebuilt/2 static/libdir/libbest.' + static_suffix
    pbcompile(compiler, source, objectfile)
    if compiler == 'cl':
        linker = ['lib', '/NOLOGO', '/OUT:' + stlibfile, objectfile]
    else:
        linker = ['ar', 'csr', stlibfile, objectfile]
    subprocess.check_call(linker)
    os.unlink(objectfile)
    return stlibfile

def generate_prebuilt():
    global compiler
    static_suffix = 'a'
    if shutil.which('cl'):
        compiler = 'cl'
        static_suffix = 'lib'
    elif shutil.which('cc'):
        compiler = 'cc'
    elif shutil.which('gcc'):
        compiler = 'gcc'
    else:
        raise RuntimeError("Could not find C compiler.")
    if mesonlib.is_windows():
        object_suffix = 'obj'
    else:
        object_suffix = 'o'
    objectfile = generate_pb_object(compiler, object_suffix)
    stlibfile = generate_pb_static(compiler, object_suffix, static_suffix)
    return objectfile, stlibfile

def check_meson_commands_work():
    global backend, meson_command, compile_commands, test_commands, install_commands
    testdir = 'test cases/common/1 trivial'
    with AutoDeletedDir(tempfile.mkdtemp(prefix='b ', dir='.')) as build_dir:
        print('Checking that configuring works...')
        gen_cmd = [sys.executable, meson_command, testdir, build_dir] + backend_flags
        pc, o, e = Popen_safe(gen_cmd)
        if pc.returncode != 0:
            raise RuntimeError('Failed to configure {!r}:\n{}\n{}'.format(testdir, e, o))
        print('Checking that building works...')
        dir_args = get_backend_args_for_dir(backend, build_dir)
        pc, o, e = Popen_safe(compile_commands + dir_args, cwd=build_dir)
        if pc.returncode != 0:
            raise RuntimeError('Failed to build {!r}:\n{}\n{}'.format(testdir, e, o))
        print('Checking that testing works...')
        pc, o, e = Popen_safe(test_commands, cwd=build_dir)
        if pc.returncode != 0:
            raise RuntimeError('Failed to test {!r}:\n{}\n{}'.format(testdir, e, o))
        if install_commands:
            print('Checking that installing works...')
            pc, o, e = Popen_safe(install_commands, cwd=build_dir)
            if pc.returncode != 0:
                raise RuntimeError('Failed to install {!r}:\n{}\n{}'.format(testdir, e, o))

if __name__ == '__main__':
    parser = argparse.ArgumentParser(description="Run the test suite of Meson.")
    parser.add_argument('extra_args', nargs='*',
                        help='arguments that are passed directly to Meson (remember to have -- before these).')
    parser.add_argument('--backend', default=None, dest='backend',
                        choices=backendlist)
    options = parser.parse_args()
    setup_commands(options.backend)

    script_dir = os.path.split(__file__)[0]
    if script_dir != '':
        os.chdir(script_dir)
    check_format()
    check_meson_commands_work()
    pbfiles = generate_prebuilt()
    try:
        all_tests = detect_tests_to_run()
        (passing_tests, failing_tests, skipped_tests) = run_tests(all_tests, 'meson-test-run', options.extra_args)
    except StopException:
        pass
    for f in pbfiles:
        os.unlink(f)
    print('\nTotal passed tests:', passing_tests)
    print('Total failed tests:', failing_tests)
    print('Total skipped tests:', skipped_tests)
    if failing_tests > 0:
        print('\nMesonlogs of failing tests\n')
        for l in failing_logs:
            print(l, '\n')
    sys.exit(failing_tests)