title: FAQ ...

Meson Frequently Asked Questions

See also How do I do X in Meson.

Why is it called Meson?

When the name was originally chosen, there were two main limitations: there must not exist either a Debian package or a Sourceforge project of the given name. This ruled out tens of potential project names. At some point the name Gluon was considered. Gluons are elementary particles that hold protons and neutrons together, much like a build system's job is to take pieces of source code and a compiler and bind them to a complete whole.

Unfortunately this name was taken, too. Then the rest of subatomic particles were examined and Meson was found to be available.

What is the correct way to use threads (such as pthreads)?

thread_dep = dependency('threads')

This will set up everything on your behalf. People coming from Autotools or CMake want to do this by looking for libpthread.so manually. Don't do that, it has tricky corner cases especially when cross compiling.

How to use Meson on a host where it is not available in system packages?

Starting from version 0.29.0, Meson is available from the Python Package Index, so installing it simply a matter of running this command:

$ pip3 install <your options here> meson

If you don't have access to PyPI, that is not a problem either. Meson has been designed to be easily runnable from an extracted source tarball or even a git checkout. First you need to download Meson. Then use this command to set up you build instead of plain meson.

$ /path/to/meson.py <options>

After this you don't have to care about invoking Meson any more. It remembers where it was originally invoked from and calls itself appropriately. As a user the only thing you need to do is to cd into your build directory and invoke meson compile.

Why can't I specify target files with a wildcard?

Instead of specifying files explicitly, people seem to want to do this:

executable('myprog', sources : '*.cpp') # This does NOT work!

Meson does not support this syntax and the reason for this is simple. This cannot be made both reliable and fast. By reliable we mean that if the user adds a new source file to the subdirectory, Meson should detect that and make it part of the build automatically.

One of the main requirements of Meson is that it must be fast. This means that a no-op build in a tree of 10 000 source files must take no more than a fraction of a second. This is only possible because Meson knows the exact list of files to check. If any target is specified as a wildcard glob, this is no longer possible. Meson would need to re-evaluate the glob every time and compare the list of files produced against the previous list. This means inspecting the entire source tree (because the glob pattern could be src/\*/\*/\*/\*.cpp or something like that). This is impossible to do efficiently.

The main backend of Meson is Ninja, which does not support wildcard matches either, and for the same reasons.

Because of this, all source files must be specified explicitly.

But I really want to use wildcards!

If the tradeoff between reliability and convenience is acceptable to you, then Meson gives you all the tools necessary to do wildcard globbing. You are allowed to run arbitrary commands during configuration. First you need to write a script that locates the files to compile. Here's a simple shell script that writes all .c files in the current directory, one per line.

#!/bin/sh

for i in *.c; do
  echo $i
done

Then you need to run this script in your Meson file, convert the output into a string array and use the result in a target.

c = run_command('grabber.sh', check: true)
sources = c.stdout().strip().split('\n')
e = executable('prog', sources)

The script can be any executable, so it can be written in shell, Python, Lua, Perl or whatever you wish.

As mentioned above, the tradeoff is that just adding new files to the source directory does not add them to the build automatically. To add them you need to tell Meson to reinitialize itself. The simplest way is to touch the meson.build file in your source root. Then Meson will reconfigure itself next time the build command is run. Advanced users can even write a small background script that utilizes a filesystem event queue, such as inotify, to do this automatically.

Should I use subdir or subproject?

The answer is almost always subdir. Subproject exists for a very specific use case: embedding external dependencies into your build process. As an example, suppose we are writing a game and wish to use SDL. Let us further suppose that SDL comes with a Meson build definition. Let us suppose even further that we don't want to use prebuilt binaries but want to compile SDL for ourselves.

In this case you would use subproject. The way to do it would be to grab the source code of SDL and put it inside your own source tree. Then you would do sdl = subproject('sdl'), which would cause Meson to build SDL as part of your build and would then allow you to link against it or do whatever else you may prefer.

For every other use you would use subdir. As an example, if you wanted to build a shared library in one dir and link tests against it in another dir, you would do something like this:

project('simple', 'c')
subdir('src')   # library is built here
subdir('tests') # test binaries would link against the library here

Why is there not a Make backend?

Because Make is slow. This is not an implementation issue, Make simply cannot be made fast. For further info we recommend you read this post by Evan Martin, the author of Ninja. Makefiles also have a syntax that is very unpleasant to write which makes them a big maintenance burden.

The only reason why one would use Make instead of Ninja is working on a platform that does not have a Ninja port. Even in this case it is an order of magnitude less work to port Ninja than it is to write a Make backend for Meson.

Just use Ninja, you'll be happier that way. I guarantee it.

Why is Meson not just a Python module so I could code my build setup in Python?

A related question to this is Why is Meson's configuration language not Turing-complete?

There are many good reasons for this, most of which are summarized on this web page: Against The Use Of Programming Languages in Configuration Files.

In addition to those reasons, not exposing Python or any other “real” programming language makes it possible to port Meson's implementation to a different language. This might become necessary if, for example, Python turns out to be a performance bottleneck. This is an actual problem that has caused complications for GNU Autotools and SCons.

How do I do the equivalent of Libtools export-symbol and export-regex?

Either by using GCC symbol visibility or by writing a linker script. This has the added benefit that your symbol definitions are in a standalone file instead of being buried inside your build definitions. An example can be found here.

My project works fine on Linux and MinGW but fails to link with MSVC due to a missing .lib file (fatal error LNK1181). Why?

With GCC, all symbols on shared libraries are exported automatically unless you specify otherwise. With MSVC no symbols are exported by default. If your shared library exports no symbols, MSVC will silently not produce an import library file leading to failures. The solution is to add symbol visibility definitions as specified in GCC wiki.

I added some compiler flags and now the build fails with weird errors. What is happening?

You probably did the equivalent to this:

executable('foobar', ...
           c_args : '-some_arg -other_arg')

Meson is explicit. In this particular case it will not automatically split your strings at whitespaces, instead it will take it as is and work extra hard to pass it to the compiler unchanged, including quoting it properly over shell invocations. This is mandatory to make e.g. files with spaces in them work flawlessly. To pass multiple command line arguments, you need to explicitly put them in an array like this:

executable('foobar', ...
           c_args : ['-some_arg', '-other_arg'])

Why are changes to default project options ignored?

You probably had a project that looked something like this:

project('foobar', 'cpp')

This defaults to c++11 on GCC compilers. Suppose you want to use c++14 instead, so you change the definition to this:

project('foobar', 'cpp', default_options : ['cpp_std=c++14'])

But when you recompile, it still uses c++11. The reason for this is that default options are only looked at when you are setting up a build directory for the very first time. After that the setting is considered to have a value and thus the default value is ignored. To change an existing build dir to c++14, either reconfigure your build dir with meson configure or delete the build dir and recreate it from scratch.

The reason we don‘t automatically change the option value when the default is changed is that it is impossible to know to do that reliably. The actual question that we need to solve is "if the option’s value is foo and the default value is bar, should we change the option value to bar also". There are many choices:

  • if the user has changed the value themselves from the default, then we must not change it back

  • if the user has not changed the value, but changes the default value, then this section's premise would seem to indicate that the value should be changed

  • suppose the user changes the value from the default to foo, then back to bar and then changes the default value to bar, the correct step to take is ambiguous by itself

In order to solve the latter question we would need to remember not only the current and old value, but also all the times the user has changed the value and from which value to which other value. Since people don't remember their own actions that far back, toggling between states based on long history would be confusing.

Because of this we do the simple and understandable thing: default values are only defaults and will never affect the value of an option once set.

Does wrap download sources behind my back?

It does not. In order for Meson to download anything from the net while building, two conditions must be met.

First of all there needs to be a .wrap file with a download URL in the subprojects directory. If one does not exist, Meson will not download anything.

The second requirement is that there needs to be an explicit subproject invocation in your meson.build files. Either subproject('foobar') or dependency('foobar', fallback : ['foobar', 'foo_dep']). If these declarations either are not in any build file or they are not called (due to e.g. if/else) then nothing is downloaded.

If this is not sufficient for you, starting from release 0.40.0 Meson has a option called wrap-mode which can be used to disable wrap downloads altogether with --wrap-mode=nodownload. You can also disable dependency fallbacks altogether with --wrap-mode=nofallback, which also implies the nodownload option.

If on the other hand, you want Meson to always use the fallback for dependencies, even when an external dependency exists and could satisfy the version requirements, for example in order to make sure your project builds when fallbacks are used, you can use --wrap-mode=forcefallback since 0.46.0.

Why is Meson implemented in Python rather than [programming language X]?

Because build systems are special in ways normal applications aren't.

Perhaps the biggest limitation is that because Meson is used to build software at the very lowest levels of the OS, it is part of the core bootstrap for new systems. Whenever support for a new CPU architecture is added, Meson must run on the system before software using it can be compiled natively. This requirement adds two hard limitations.

The first one is that Meson must have the minimal amount of dependencies, because they must all be built during the bootstrap to get Meson to work.

The second is that Meson must support all CPU architectures, both existing and future ones. As an example many new programming languages have only an LLVM based compiler available. LLVM has limited CPU support compared to, say, GCC, and thus bootstrapping Meson on such platforms would first require adding new processor support to LLVM. This is in most cases unfeasible.

A further limitation is that we want developers on as many platforms as possible to submit to Meson development using the default tools provided by their operating system. In practice what this means is that Windows developers should be able to contribute using nothing but Visual Studio.

At the time of writing (April 2018) there are only three languages that could fulfill these requirements:

  • C
  • C++
  • Python

Out of these we have chosen Python because it is the best fit for our needs.

But I really want a version of Meson that doesn't use python!

Ecosystem diversity is good. We encourage interested users to write this competing implementation of Meson themselves. As of September 2021, there are 3 projects attempting to do just this:

I have proprietary compiler toolchain X that does not work with Meson, how can I make it work?

Meson needs to know several details about each compiler in order to compile code with it. These include things such as which compiler flags to use for each option and how to detect the compiler from its output. This information cannot be input via a configuration file, instead it requires changes to Meson‘s source code that need to be submitted to Meson master repository. In theory you can run your own forked version with custom patches, but that’s not good use of your time. Please submit the code upstream so everyone can use the toolchain.

The steps for adding a new compiler for an existing language are roughly the following. For simplicity we're going to assume a C compiler.

  • Create a new class with a proper name in mesonbuild/compilers/c.py. Look at the methods that other compilers for the same language have and duplicate what they do.

  • If the compiler can only be used for cross compilation, make sure to flag it as such (see existing compiler classes for examples).

  • Add detection logic to mesonbuild/environment.py, look for a method called detect_c_compiler.

  • Run the test suite and fix issues until the tests pass.

  • Submit a pull request, add the result of the test suite to your MR (linking an existing page is fine).

  • If the compiler is freely available, consider adding it to the CI system.

Why does building my project with MSVC output static libraries called libfoo.a?

The naming convention for static libraries on Windows is usually foo.lib. Unfortunately, import libraries are also called foo.lib.

This causes filename collisions with the default library type where we build both shared and static libraries, and also causes collisions during installation since all libraries are installed to the same directory by default.

To resolve this, we decided to default to creating static libraries of the form libfoo.a when building with MSVC. This has the following advantages:

  1. Filename collisions are completely avoided.
  2. The format for MSVC static libraries is ar, which is the same as the GNU static library format, so using this extension is semantically correct.
  3. The static library filename format is now the same on all platforms and with all toolchains.
  4. Both Clang and GNU compilers can search for libfoo.a when specifying a library as -lfoo. This does not work for alternative naming schemes for static libraries such as libfoo.lib.
  5. Since -lfoo works out of the box, pkgconfig files will work correctly for projects built with both MSVC, GCC, and Clang on Windows.
  6. MSVC does not have arguments to search for library filenames, and it does not care what the extension is, so specifying libfoo.a instead of foo.lib does not change the workflow, and is an improvement since it's less ambiguous.
  7. Projects built with the MinGW compiler are fully compatible with MSVC as long as they use the same CRT (e.g. UCRT with MSYS2). These projects also name their static libraries libfoo.a.

If, for some reason, you really need your project to output static libraries of the form foo.lib when building with MSVC, you can set the name_prefix: kwarg to '' and the name_suffix: kwarg to 'lib'. To get the default behaviour for each, you can either not specify the kwarg, or pass [] (an empty array) to it.

Do I need to add my headers to the sources list like in Autotools?

Autotools requires you to add private and public headers to the sources list so that it knows what files to include in the tarball generated by make dist. Meson's dist command simply gathers everything committed to your git/hg repository and adds it to the tarball, so adding headers to the sources list is pointless.

Meson uses Ninja which uses compiler dependency information to automatically figure out dependencies between C sources and headers, so it will rebuild things correctly when a header changes.

The only exception to this are generated headers, for which you must declare dependencies correctly.

If, for whatever reason, you do add non-generated headers to the sources list of a target, Meson will simply ignore them.

How do I tell Meson that my sources use generated headers?

Let‘s say you use a custom_target() to generate the headers, and then #include them in your C code. Here’s how you ensure that Meson generates the headers before trying to compile any sources in the build target:

libfoo_gen_headers = custom_target('gen-headers', ..., output: 'foo-gen.h')
libfoo_sources = files('foo-utils.c', 'foo-lib.c')
# Add generated headers to the list of sources for the build target
libfoo = library('foo', sources: [libfoo_sources + libfoo_gen_headers])

Now let's say you have a new target that links to libfoo:

libbar_sources = files('bar-lib.c')
libbar = library('bar', sources: libbar_sources, link_with: libfoo)

This adds a link-time dependency between the two targets, but note that the sources of the targets have no compile-time dependencies and can be built in any order; which improves parallelism and speeds up builds.

If the sources in libbar also use foo-gen.h, that‘s a compile-time dependency, and you’ll have to add libfoo_gen_headers to sources: for libbar too:

libbar_sources = files('bar-lib.c')
libbar = library('bar', sources: libbar_sources + libfoo_gen_headers, link_with: libfoo)

Alternatively, if you have multiple libraries with sources that link to a library and also use its generated headers, this code is equivalent to above:

# Add generated headers to the list of sources for the build target
libfoo = library('foo', sources: libfoo_sources + libfoo_gen_headers)

# Declare a dependency that will add the generated headers to sources
libfoo_dep = declare_dependency(link_with: libfoo, sources: libfoo_gen_headers)

...

libbar = library('bar', sources: libbar_sources, dependencies: libfoo_dep)

Note: You should only add headers to sources: while declaring a dependency. If your custom target outputs both sources and headers, you can use the subscript notation to get only the header(s):

libfoo_gen_sources = custom_target('gen-headers', ..., output: ['foo-gen.h', 'foo-gen.c'])
libfoo_gen_headers = libfoo_gen_sources[0]

# Add static and generated sources to the target
libfoo = library('foo', sources: libfoo_sources + libfoo_gen_sources)

# Declare a dependency that will add the generated *headers* to sources
libfoo_dep = declare_dependency(link_with: libfoo, sources: libfoo_gen_headers)
...
libbar = library('bar', sources: libbar_sources, dependencies: libfoo_dep)

A good example of a generator that outputs both sources and headers is gnome.mkenums().

How do I disable exceptions and RTTI in my C++ project?

With the cpp_eh and cpp_rtti options. A typical invocation would look like this:

meson -Dcpp_eh=none -Dcpp_rtti=false <other options>

The RTTI option is only available since Meson version 0.53.0.

Should I check for buildtype or individual options like debug in my build files?

This depends highly on what you actually need to happen. The ´buildtype` option is meant do describe the current build's intent. That is, what it will be used for. Individual options are for determining what the exact state is. This becomes clearer with a few examples.

Suppose you have a source file that is known to miscompile when using -O3 and requires a workaround. Then you'd write something like this:

if get_option('optimization') == '3'
    add_project_arguments('-DOPTIMIZATION_WORKAROUND', ...)
endif

On the other hand if your project has extra logging and sanity checks that you would like to be enabled during the day to day development work (which uses the debug buildtype), you'd do this instead:

if get_option('buildtype') == 'debug'
    add_project_arguments('-DENABLE_EXTRA_CHECKS', ...)
endif

In this way the extra options are automatically used during development but are not compiled in release builds. Note that (since Meson 0.57.0) you can set optimization to, say, 2 in your debug builds if you want to. If you tried to set this flag based on optimization level, it would fail in this case.

How do I use a library before declaring it?

This is valid (and good) code:

libA = library('libA', 'fileA.cpp', link_with : [])
libB = library('libB', 'fileB.cpp', link_with : [libA])

But there is currently no way to get something like this to work:

libB = library('libB', 'fileB.cpp', link_with : [libA])
libA = library('libA', 'fileA.cpp', link_with : [])

This means that you HAVE to write your library(...) calls in the order that the dependencies flow. While ideas to make arbitrary orders possible exist, they were rejected because reordering the library(...) calls was considered the “proper” way. See here for the discussion.

Why doesn't meson have user defined functions/macros?

The tl;dr answer to this is that meson's design is focused on solving specific problems rather than providing a general purpose language to write complex code solutions in build files. Build systems should be quick to write and quick to understand, functions muddle this simplicity.

The long answer is twofold:

First, Meson aims to provide a rich set of tools that solve specific problems simply out of the box. This is similar to the “batteries included” mentality of Python. By providing tools that solve common problems in the simplest way possible in Meson we are solving that problem for everyone instead of forcing everyone to solve that problem for themselves over and over again, often badly. One example of this are Meson‘s dependency wrappers around various config-tool executables (sdl-config, llvm-config, etc). In other build systems each user of that dependency writes a wrapper and deals with the corner cases (or doesn’t, as is often the case), in Meson we handle them internally, everyone gets fixes and the corner cases are ironed out for everyone. Providing user defined functions or macros goes directly against this design goal.

Second, functions and macros makes the build system more difficult to reason about. When you encounter some function call, you can refer to the reference manual to see that function and its signature. Instead of spending frustrating hours trying to interpret some bit of m4 or follow long include paths to figure out what function1 (which calls function2, which calls function3, ad infinitum), you know what the build system is doing. Unless you‘re actively developing Meson itself, it’s just a tool to orchestrate building the thing you actually care about. We want you to spend as little time worrying about build systems as possible so you can spend more time on your code.

Many times user defined functions are used due to a lack of loops or because loops are tedious to use in the language. Meson has both arrays/lists and hashes/dicts natively. Compare the following pseudo code:

func(name, sources, extra_args)
  executable(
    name,
    sources,
    c_args : extra_args
  )
endfunc

func(exe1, ['1.c', 'common.c'], [])
func(exe2, ['2.c', 'common.c'], [])
func(exe2_a, ['2.c', 'common.c'], ['-arg'])
foreach e : [['1', '1.c', []],
             ['2', '2.c', []],
             ['2', '2.c', ['-arg']]]
  executable(
    'exe' + e[0],
    e[1],
    c_args : e[2],
  )
endforeach

The loop is both less code and is much easier to reason about than the function version is, especially if the function were to live in a separate file, as is common in other popular build systems.

Build system DSLs also tend to be badly thought out as generic programming languages, Meson tries to make it easy to use external scripts or programs for handling complex problems. While one can‘t always convert build logic into a scripting language (or compiled language), when it can be done this is often a better solution. External languages tend to be well-thought-out and tested, generally don’t regress, and users are more likely to have domain knowledge about them. They also tend to have better tooling (such as autocompletion, linting, testing solutions), which make them a lower maintenance burden over time.

Why don't the arguments passed to add_project_link_arguments affect anything?

Given code like this:

add_project_link_arguments(['-Wl,-foo'], language : ['c'])
executable(
  'main',
  'main.c',
  'helper.cpp',
)

One might be surprised to find that -Wl,-foo is not applied to the linkage of the main executable. In this Meson is working as expected, since meson will attempt to determine the correct linker to use automatically. This avoids situations like in autotools where dummy C++ sources have to be added to some compilation targets to get correct linkage. So in the above case the C++ linker is used, instead of the C linker, as helper.cpp likely cannot be linked using the C linker.

Generally the best way to resolve this is to add the cpp language to the add_project_link_arguments call.

add_project_link_arguments(['-Wl,-foo'], language : ['c', 'cpp'])
executable(
  'main',
  'main.c',
  'helper.cpp',
)

To force the use of the C linker anyway the link_language keyword argument can be used. Note that this can result in a compilation failure if there are symbols that the C linker cannot resolve.

add_project_link_arguments(['-Wl,-foo'], language : ['c'])
executable(
  'main',
  'main.c',
  'helper.cpp',
  link_language : 'c',
)

How do I ignore the build directory in my VCS?

You don't need to, assuming you use git or mercurial! Meson >=0.57.0 will create a .gitignore and .hgignore file for you, inside each build directory. It glob ignores "*", since all generated files should not be checked into git.

Users of older versions of Meson may need to set up ignore files themselves.

How to add preprocessor defines to a target?

Just add -DFOO to c_args or cpp_args. This works for all known compilers.

mylib = library('mylib', 'mysource.c', c_args: ['-DFOO'])

Even though MSVC documentation uses /D for preprocessor defines, its command-line syntax accepts - instead of /. It's not necessary to treat preprocessor defines specially in Meson (GH-6269).