| /* |
| * Copyright (c) 2019 Nutanix Inc. All rights reserved. |
| * |
| * Authors: Thanos Makatos <thanos@nutanix.com> |
| * Swapnil Ingle <swapnil.ingle@nutanix.com> |
| * Felipe Franciosi <felipe@nutanix.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Nutanix nor the names of its contributors may be |
| * used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| * |
| */ |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <sys/ioctl.h> |
| #include <assert.h> |
| #include <errno.h> |
| #include <stddef.h> |
| #include <sys/mman.h> |
| #include <stdarg.h> |
| #include <linux/vfio.h> |
| #include <sys/param.h> |
| #include <sys/socket.h> |
| #include <sys/stat.h> |
| #include <inttypes.h> |
| #include <sys/eventfd.h> |
| |
| #include "dma.h" |
| #include "irq.h" |
| #include "libvfio-user.h" |
| #include "migration.h" |
| #include "pci.h" |
| #include "private.h" |
| #include "tran_pipe.h" |
| #include "tran_sock.h" |
| |
| static int |
| vfu_reset_ctx(vfu_ctx_t *vfu_ctx, int reason); |
| |
| EXPORT void |
| vfu_log(vfu_ctx_t *vfu_ctx, int level, const char *fmt, ...) |
| { |
| va_list ap; |
| char buf[BUFSIZ]; |
| int _errno = errno; |
| |
| assert(vfu_ctx != NULL); |
| |
| if (vfu_ctx->log == NULL || level > vfu_ctx->log_level || fmt == NULL) { |
| return; |
| } |
| |
| va_start(ap, fmt); |
| vsnprintf(buf, sizeof(buf), fmt, ap); |
| va_end(ap); |
| vfu_ctx->log(vfu_ctx, level, buf); |
| errno = _errno; |
| } |
| |
| static size_t |
| get_vfio_caps_size(vfu_reg_info_t *reg) |
| { |
| size_t sparse_size = 0; |
| |
| if (reg->nr_mmap_areas != 0) { |
| sparse_size = sizeof(struct vfio_region_info_cap_sparse_mmap) |
| + (reg->nr_mmap_areas * sizeof(struct vfio_region_sparse_mmap_area)); |
| } |
| |
| return sparse_size; |
| } |
| |
| /* |
| * Populate the sparse mmap capability information to vfio-client. |
| * Sparse mmap information stays after struct vfio_region_info and cap_offset |
| * points accordingly. |
| */ |
| static int |
| dev_get_caps(vfu_ctx_t *vfu_ctx, vfu_reg_info_t *vfu_reg, |
| struct vfio_region_info *vfio_reg, int **fds, size_t *nr_fds) |
| { |
| struct vfio_info_cap_header *header; |
| struct vfio_region_info_cap_sparse_mmap *sparse = NULL; |
| |
| assert(vfu_ctx != NULL); |
| assert(vfio_reg != NULL); |
| assert(fds != NULL); |
| assert(nr_fds != NULL); |
| |
| header = (struct vfio_info_cap_header*)(vfio_reg + 1); |
| |
| if (vfu_reg->mmap_areas != NULL) { |
| int i, nr_mmap_areas = vfu_reg->nr_mmap_areas; |
| vfio_reg->cap_offset = sizeof(struct vfio_region_info); |
| sparse = (struct vfio_region_info_cap_sparse_mmap *)header; |
| |
| *fds = malloc(nr_mmap_areas * sizeof(int)); |
| if (*fds == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| sparse->header.id = VFIO_REGION_INFO_CAP_SPARSE_MMAP; |
| sparse->header.version = 1; |
| sparse->header.next = 0; |
| sparse->nr_areas = nr_mmap_areas; |
| *nr_fds = 1; |
| (*fds)[0] = vfu_reg->fd; |
| |
| for (i = 0; i < nr_mmap_areas; i++) { |
| struct iovec *iov = &vfu_reg->mmap_areas[i]; |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "%s: area %d [%p, %p)", __func__, |
| i, iov->iov_base, iov_end(iov)); |
| |
| sparse->areas[i].offset = (uintptr_t)iov->iov_base; |
| sparse->areas[i].size = iov->iov_len; |
| } |
| } |
| return 0; |
| } |
| |
| #ifdef DEBUG |
| static void |
| debug_region_access(vfu_ctx_t *vfu_ctx, size_t region, char *buf, |
| size_t count, uint64_t offset, bool is_write) |
| { |
| const char *verb = is_write ? "wrote" : "read"; |
| uint64_t val; |
| |
| switch (count) { |
| case 8: val = *((uint64_t *)buf); break; |
| case 4: val = *((uint32_t *)buf); break; |
| case 2: val = *((uint16_t *)buf); break; |
| case 1: val = *((uint8_t *)buf); break; |
| default: |
| vfu_log(vfu_ctx, LOG_DEBUG, "region%zu: %s %zu bytes at %#llx", |
| region, verb, count, (ull_t)offset); |
| return; |
| } |
| |
| if (is_write) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "region%zu: wrote %#llx to (%#llx:%zu)", |
| region, (ull_t)val, (ull_t)offset, |
| count); |
| } else { |
| vfu_log(vfu_ctx, LOG_DEBUG, "region%zu: read %#llx from (%#llx:%zu)", |
| region, (ull_t)val, (ull_t)offset, |
| count); |
| } |
| } |
| #else |
| static void |
| debug_region_access(vfu_ctx_t *vfu_ctx UNUSED, size_t region UNUSED, |
| char *buf UNUSED, size_t count UNUSED, |
| uint64_t offset UNUSED, bool is_write UNUSED) |
| { |
| } |
| #endif |
| |
| static ssize_t |
| region_access(vfu_ctx_t *vfu_ctx, size_t region, char *buf, |
| size_t count, uint64_t offset, bool is_write) |
| { |
| const char *verb = is_write ? "write to" : "read from"; |
| ssize_t ret; |
| |
| assert(vfu_ctx != NULL); |
| assert(buf != NULL); |
| |
| if ((region == VFU_PCI_DEV_CFG_REGION_IDX) && |
| !(vfu_ctx->reg_info[region].flags & VFU_REGION_FLAG_ALWAYS_CB)) { |
| ret = pci_config_space_access(vfu_ctx, buf, count, offset, is_write); |
| if (ret == -1) { |
| goto out; |
| } |
| } else { |
| vfu_region_access_cb_t *cb = vfu_ctx->reg_info[region].cb; |
| |
| if (cb == NULL) { |
| vfu_log(vfu_ctx, LOG_ERR, "no callback for region %zu", region); |
| ret = ERROR_INT(EINVAL); |
| goto out; |
| } |
| |
| ret = cb(vfu_ctx, buf, count, offset, is_write); |
| } |
| |
| out: |
| if (unlikely(ret != (ssize_t)count)) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "region%zu: %s (%#llx:%zu) failed: %m", |
| region, verb, (ull_t)offset, count); |
| } else { |
| debug_region_access(vfu_ctx, region, buf, count, offset, is_write); |
| } |
| return ret; |
| } |
| |
| static bool |
| is_valid_region_access(vfu_ctx_t *vfu_ctx, size_t size, uint16_t cmd, |
| struct vfio_user_region_access *ra) |
| { |
| size_t index; |
| |
| assert(vfu_ctx != NULL); |
| assert(ra != NULL); |
| |
| if (unlikely(size < sizeof(*ra))) { |
| vfu_log(vfu_ctx, LOG_ERR, "message size too small (%zu)", size); |
| return false; |
| } |
| |
| if (unlikely(ra->count > SERVER_MAX_DATA_XFER_SIZE)) { |
| vfu_log(vfu_ctx, LOG_ERR, "region access count too large (%u)", |
| ra->count); |
| return false; |
| } |
| |
| if (unlikely(cmd == VFIO_USER_REGION_WRITE |
| && size - sizeof(*ra) != ra->count)) { |
| vfu_log(vfu_ctx, LOG_ERR, "region write count too small: " |
| "expected %zu, got %u", size - sizeof(*ra), ra->count); |
| return false; |
| } |
| |
| index = ra->region; |
| |
| if (unlikely(index >= vfu_ctx->nr_regions)) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad region index %zu", index); |
| return false; |
| } |
| |
| if (unlikely(satadd_u64(ra->offset, ra->count) |
| > vfu_ctx->reg_info[index].size)) { |
| vfu_log(vfu_ctx, LOG_ERR, |
| "out of bounds region access %#llx-%#llx (size %u)", |
| (ull_t)ra->offset, |
| (ull_t)(ra->offset + ra->count), |
| vfu_ctx->reg_info[index].size); |
| |
| return false; |
| } |
| |
| if (unlikely(device_is_stopped_and_copying(vfu_ctx->migration))) { |
| vfu_log(vfu_ctx, LOG_ERR, |
| "cannot access region %zu while device in stop-and-copy state", |
| index); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int |
| handle_region_access(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| struct vfio_user_region_access *in_ra = msg->in.iov.iov_base; |
| struct vfio_user_region_access *out_ra; |
| ssize_t ret; |
| char *buf; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| |
| if (unlikely(!is_valid_region_access(vfu_ctx, msg->in.iov.iov_len, msg->hdr.cmd, in_ra))) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| if (unlikely(in_ra->count == 0)) { |
| return 0; |
| } |
| |
| msg->out.iov.iov_len = sizeof(*in_ra); |
| if (msg->hdr.cmd == VFIO_USER_REGION_READ) { |
| msg->out.iov.iov_len += in_ra->count; |
| } |
| msg->out.iov.iov_base = calloc(1, msg->out.iov.iov_len); |
| if (unlikely(msg->out.iov.iov_base == NULL)) { |
| return -1; |
| } |
| |
| out_ra = msg->out.iov.iov_base; |
| out_ra->region = in_ra->region; |
| out_ra->offset = in_ra->offset; |
| out_ra->count = in_ra->count; |
| |
| if (msg->hdr.cmd == VFIO_USER_REGION_READ) { |
| buf = (char *)(&out_ra->data); |
| } else { |
| buf = (char *)(&in_ra->data); |
| } |
| |
| ret = region_access(vfu_ctx, in_ra->region, buf, in_ra->count, |
| in_ra->offset, msg->hdr.cmd == VFIO_USER_REGION_WRITE); |
| if (ret != (ssize_t)in_ra->count) { |
| /* FIXME we should return whatever has been accessed, not an error */ |
| if (unlikely(ret >= 0)) { |
| ret = ERROR_INT(EINVAL); |
| } |
| return ret; |
| } |
| |
| out_ra->count = ret; |
| |
| return 0; |
| } |
| |
| static int |
| handle_device_get_info(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| struct vfio_user_device_info *in_info; |
| struct vfio_user_device_info *out_info; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| |
| in_info = msg->in.iov.iov_base; |
| |
| if (unlikely(msg->in.iov.iov_len < sizeof(*in_info) || |
| in_info->argsz < sizeof(*out_info))) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| msg->out.iov.iov_len = sizeof (*out_info); |
| msg->out.iov.iov_base = calloc(1, sizeof(*out_info)); |
| |
| if (msg->out.iov.iov_base == NULL) { |
| return -1; |
| } |
| |
| out_info = msg->out.iov.iov_base; |
| out_info->argsz = sizeof(*out_info); |
| out_info->flags = VFIO_DEVICE_FLAGS_PCI | VFIO_DEVICE_FLAGS_RESET; |
| out_info->num_regions = vfu_ctx->nr_regions; |
| out_info->num_irqs = VFU_DEV_NUM_IRQS; |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "devinfo flags %#x, num_regions %d, " |
| "num_irqs %d", out_info->flags, out_info->num_regions, |
| out_info->num_irqs); |
| |
| return 0; |
| } |
| |
| int |
| handle_device_get_region_info(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| struct vfio_region_info *in_info; |
| struct vfio_region_info *out_info; |
| vfu_reg_info_t *vfu_reg; |
| size_t caps_size = 0; |
| int ret; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| |
| in_info = msg->in.iov.iov_base; |
| |
| if (msg->in.iov.iov_len < sizeof(*in_info) || in_info->argsz < sizeof(*out_info)) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| if (in_info->index >= vfu_ctx->nr_regions) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "bad region index %d in get region info", |
| in_info->index); |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_reg = &vfu_ctx->reg_info[in_info->index]; |
| |
| if (vfu_reg->size > 0) { |
| caps_size = get_vfio_caps_size(vfu_reg); |
| } |
| |
| msg->out.iov.iov_len = MIN(sizeof(*out_info) + caps_size, in_info->argsz); |
| msg->out.iov.iov_base = calloc(1, msg->out.iov.iov_len); |
| |
| if (msg->out.iov.iov_base == NULL) { |
| return -1; |
| } |
| |
| out_info = msg->out.iov.iov_base; |
| |
| /* This might be more than the buffer we actually return. */ |
| out_info->argsz = sizeof(*out_info) + caps_size; |
| out_info->index = in_info->index; |
| out_info->offset = vfu_reg->offset; |
| out_info->size = vfu_reg->size; |
| |
| out_info->flags = 0; |
| |
| if (vfu_reg->flags & VFU_REGION_FLAG_READ) { |
| out_info->flags |= VFIO_REGION_INFO_FLAG_READ; |
| } |
| if (vfu_reg->flags & VFU_REGION_FLAG_WRITE) { |
| out_info->flags |= VFIO_REGION_INFO_FLAG_WRITE; |
| } |
| |
| if (vfu_reg->fd != -1) { |
| out_info->flags |= VFIO_REGION_INFO_FLAG_MMAP; |
| } |
| |
| if (caps_size > 0) { |
| /* Only actually provide the caps if they fit. */ |
| if (in_info->argsz >= out_info->argsz) { |
| out_info->flags |= VFIO_REGION_INFO_FLAG_CAPS; |
| ret = dev_get_caps(vfu_ctx, vfu_reg, out_info, &msg->out.fds, |
| &msg->out.nr_fds); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| } |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "region_info[%d] offset %#llx flags %#x " |
| "size %llu argsz %u", out_info->index, |
| (ull_t)out_info->offset, |
| out_info->flags, (ull_t)out_info->size, |
| out_info->argsz); |
| |
| return 0; |
| } |
| |
| EXPORT int |
| vfu_create_ioeventfd(vfu_ctx_t *vfu_ctx, uint32_t region_idx, int fd, |
| size_t gpa_offset, uint32_t size, uint32_t flags, |
| uint64_t datamatch, int shadow_fd, size_t shadow_offset) |
| { |
| vfu_reg_info_t *vfu_reg; |
| |
| assert(vfu_ctx != NULL); |
| |
| #ifndef SHADOW_IOEVENTFD |
| if (shadow_fd != -1) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "shadow ioeventfd not compiled"); |
| return ERROR_INT(EINVAL); |
| } |
| #endif |
| |
| if (region_idx >= VFU_PCI_DEV_NUM_REGIONS) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_reg = &vfu_ctx->reg_info[region_idx]; |
| |
| if (gpa_offset + size > vfu_reg->size) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| ioeventfd_t *elem = malloc(sizeof(ioeventfd_t)); |
| if (elem == NULL) { |
| return -1; |
| } |
| |
| elem->fd = fd; |
| elem->gpa_offset = gpa_offset; |
| elem->size = size; |
| elem->flags = flags; |
| elem->datamatch = datamatch; |
| elem->shadow_fd = shadow_fd; |
| elem->shadow_offset = shadow_offset; |
| LIST_INSERT_HEAD(&vfu_reg->subregions, elem, entry); |
| |
| return 0; |
| } |
| |
| static void |
| free_regions(vfu_ctx_t *vfu_ctx) |
| { |
| size_t index = 0; |
| |
| assert(vfu_ctx != NULL); |
| |
| for (index = 0; index < VFU_PCI_DEV_NUM_REGIONS; index++) { |
| vfu_reg_info_t *vfu_reg = &vfu_ctx->reg_info[index]; |
| |
| while (!LIST_EMPTY(&vfu_reg->subregions)) { |
| ioeventfd_t *n = LIST_FIRST(&vfu_reg->subregions); |
| LIST_REMOVE(n, entry); |
| free(n); |
| } |
| } |
| free(vfu_ctx->reg_info); |
| } |
| |
| /* |
| * This function is used to add fd's to the fd return array and gives you back |
| * the index of the fd that has been added. If the fd is already present it will |
| * return the index to that duplicate fd to reduce the number of fd's sent. |
| * The fd must be a valid fd or -1, any other negative value is not permitted. |
| * |
| * out_fds: an array where the fd is stored |
| * nr_out_fds: pointer to memory that contains the size of the array |
| * fd_search: the fd to add |
| * |
| * returns: the array index where the fd is added to, can be the index of an |
| * existing fd if this is a duplicate fd. If the fd is -1 then the function |
| * returns -1. |
| */ |
| static int |
| add_fd_index(int *out_fds, size_t *nr_out_fds, int fd_search) |
| { |
| size_t i = 0; |
| |
| assert(out_fds != NULL); |
| assert(nr_out_fds != NULL); |
| |
| assert(fd_search >= -1); |
| if (fd_search == -1) { |
| return -1; |
| } |
| |
| for (i = 0; i < *nr_out_fds; i++) { |
| if (out_fds[i] == fd_search) { |
| return i; |
| } |
| } |
| |
| out_fds[*nr_out_fds] = fd_search; |
| (*nr_out_fds)++; |
| |
| return *nr_out_fds - 1; |
| } |
| |
| static int |
| handle_device_get_region_io_fds(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| size_t max_sent_sub_regions = 0; |
| uint subregion_array_size = 0; |
| vfu_reg_info_t *vfu_reg = NULL; |
| vfio_user_region_io_fds_reply_t *reply = NULL; |
| vfio_user_sub_region_ioeventfd_t *ioefd = NULL; |
| vfio_user_region_io_fds_request_t *req = NULL; |
| ioeventfd_t *sub_reg = NULL; |
| size_t nr_sub_reg = 0; |
| size_t i = 0; |
| size_t nr_shadow_reg = 0; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| assert(msg->out.fds == NULL); |
| |
| if (msg->in.iov.iov_len < sizeof(vfio_user_region_io_fds_request_t)) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "input message too small"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| req = msg->in.iov.iov_base; |
| |
| if (req->flags != 0 || req->count != 0) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "bad flags or bad count"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| if (req->index >= vfu_ctx->nr_regions) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "bad region index %d in get region io fds " |
| "info", req->index); |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_reg = &vfu_ctx->reg_info[req->index]; |
| |
| // At least one flag must be set for a valid region. |
| if (!(vfu_reg->flags & VFU_REGION_FLAG_MASK)) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "bad region flags"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| LIST_FOREACH(sub_reg, &vfu_reg->subregions, entry) { |
| nr_sub_reg++; |
| if (sub_reg->shadow_fd != -1) { |
| nr_shadow_reg++; |
| } |
| } |
| |
| if (req->argsz < sizeof(vfio_user_region_io_fds_reply_t) || |
| req->argsz > SERVER_MAX_DATA_XFER_SIZE) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "bad argsz"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| max_sent_sub_regions = MIN((req->argsz - |
| sizeof(vfio_user_region_io_fds_reply_t)) / |
| sizeof(vfio_user_sub_region_ioeventfd_t), |
| nr_sub_reg); |
| subregion_array_size = ((max_sent_sub_regions >= nr_sub_reg) ? nr_sub_reg : |
| 0) * sizeof(vfio_user_sub_region_ioeventfd_t); |
| msg->out.iov.iov_len = sizeof(vfio_user_region_io_fds_reply_t) |
| + subregion_array_size; |
| msg->out.iov.iov_base = calloc(1, msg->out.iov.iov_len); |
| if (msg->out.iov.iov_base == NULL) { |
| return -1; |
| } |
| reply = msg->out.iov.iov_base; |
| reply->index = req->index; |
| reply->count = nr_sub_reg; |
| reply->flags = 0; |
| reply->argsz = sizeof(vfio_user_region_io_fds_reply_t) + |
| nr_sub_reg * |
| sizeof(vfio_user_sub_region_ioeventfd_t); |
| |
| msg->out.nr_fds = 0; |
| |
| if (max_sent_sub_regions > 0 && req->argsz >= reply->argsz) { |
| msg->out.fds = calloc(sizeof(int), |
| max_sent_sub_regions + nr_shadow_reg); |
| if (msg->out.fds == NULL) { |
| return -1; |
| } |
| |
| sub_reg = LIST_FIRST(&vfu_reg->subregions); |
| |
| for (i = 0; i < max_sent_sub_regions; i++) { |
| int fdi; |
| |
| ioefd = &reply->sub_regions[i].ioeventfd; |
| ioefd->gpa_offset = sub_reg->gpa_offset; |
| ioefd->size = sub_reg->size; |
| fdi = add_fd_index(msg->out.fds, &msg->out.nr_fds, sub_reg->fd); |
| ioefd->fd_index = fdi; |
| if (sub_reg->shadow_fd == -1) { |
| ioefd->type = VFIO_USER_IO_FD_TYPE_IOEVENTFD; |
| } else { |
| ioefd->type = VFIO_USER_IO_FD_TYPE_IOEVENTFD_SHADOW; |
| fdi = add_fd_index(msg->out.fds, &msg->out.nr_fds, |
| sub_reg->shadow_fd); |
| ioefd->shadow_mem_fd_index = fdi; |
| } |
| ioefd->flags = sub_reg->flags; |
| ioefd->datamatch = sub_reg->datamatch; |
| ioefd->shadow_offset = sub_reg->shadow_offset; |
| |
| sub_reg = LIST_NEXT(sub_reg, entry); |
| } |
| } |
| |
| return 0; |
| } |
| |
| int |
| consume_fd(int *fds, size_t nr_fds, size_t index) |
| { |
| int fd; |
| |
| if (index >= nr_fds) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| fd = fds[index]; |
| fds[index] = -1; |
| return fd; |
| } |
| |
| int |
| handle_dma_map(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg, |
| struct vfio_user_dma_map *dma_map) |
| { |
| char rstr[1024]; |
| int fd = -1; |
| int ret; |
| uint32_t prot = 0; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| assert(dma_map != NULL); |
| |
| if (msg->in.iov.iov_len < sizeof(*dma_map) || dma_map->argsz < sizeof(*dma_map)) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad DMA map region size=%zu argsz=%u", |
| msg->in.iov.iov_len, dma_map->argsz); |
| return ERROR_INT(EINVAL); |
| } |
| |
| snprintf(rstr, sizeof(rstr), "[%#llx, %#llx) offset=%#llx flags=%#x", |
| (ull_t)dma_map->addr, |
| (ull_t)(dma_map->addr + dma_map->size), |
| (ull_t)dma_map->offset, |
| dma_map->flags); |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "adding DMA region %s", rstr); |
| |
| if (dma_map->flags & VFIO_USER_F_DMA_REGION_READ) { |
| prot |= PROT_READ; |
| dma_map->flags &= ~VFIO_USER_F_DMA_REGION_READ; |
| } |
| |
| if (dma_map->flags & VFIO_USER_F_DMA_REGION_WRITE) { |
| prot |= PROT_WRITE; |
| dma_map->flags &= ~VFIO_USER_F_DMA_REGION_WRITE; |
| } |
| |
| if (dma_map->flags != 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad flags=%#x", dma_map->flags); |
| return ERROR_INT(EINVAL); |
| } |
| |
| if (msg->in.nr_fds > 0) { |
| fd = consume_fd(msg->in.fds, msg->in.nr_fds, 0); |
| if (fd < 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "failed to add DMA region %s: %m", rstr); |
| return -1; |
| } |
| } |
| |
| ret = dma_controller_add_region(vfu_ctx->dma, |
| (vfu_dma_addr_t)(uintptr_t)dma_map->addr, |
| dma_map->size, fd, dma_map->offset, |
| prot); |
| if (ret < 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "failed to add DMA region %s: %m", rstr); |
| close_safely(&fd); |
| return -1; |
| } |
| |
| if (vfu_ctx->dma_register != NULL) { |
| vfu_ctx->in_cb = CB_DMA_REGISTER; |
| vfu_ctx->dma_register(vfu_ctx, &vfu_ctx->dma->regions[ret].info); |
| vfu_ctx->in_cb = CB_NONE; |
| |
| } |
| return 0; |
| } |
| |
| /* |
| * Ideally, if argsz is too small for the bitmap, we should set argsz in the |
| * reply and fail the request with a struct vfio_user_dma_unmap payload. |
| * Instead, we simply fail the request - that's what VFIO does anyway. |
| */ |
| static bool |
| is_valid_unmap(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg, |
| struct vfio_user_dma_unmap *dma_unmap) |
| { |
| size_t struct_size = sizeof(*dma_unmap); |
| size_t min_argsz = sizeof(*dma_unmap); |
| |
| switch (dma_unmap->flags) { |
| case VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP: |
| struct_size += sizeof(*dma_unmap->bitmap); |
| /* |
| * Because the saturating add will ensure that any overflow will be |
| * larger than the maximum allowed ->argsz, this is sufficient to check |
| * for that (which we need, because we are about to allocate based upon |
| * this value). |
| */ |
| min_argsz = satadd_u64(struct_size, dma_unmap->bitmap->size); |
| break; |
| |
| case VFIO_DMA_UNMAP_FLAG_ALL: |
| if (dma_unmap->addr || dma_unmap->size) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad addr=%#llx or size=%#llx, expected " |
| "both to be zero", (ull_t)dma_unmap->addr, |
| (ull_t)dma_unmap->size); |
| errno = EINVAL; |
| return false; |
| } |
| break; |
| |
| case 0: |
| break; |
| |
| default: |
| vfu_log(vfu_ctx, LOG_ERR, "invalid DMA flags=%#x", dma_unmap->flags); |
| errno = EINVAL; |
| return false; |
| } |
| |
| if (msg->in.iov.iov_len < struct_size || |
| dma_unmap->argsz < min_argsz || |
| dma_unmap->argsz > SERVER_MAX_DATA_XFER_SIZE) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad DMA unmap region size=%zu argsz=%u", |
| msg->in.iov.iov_len, dma_unmap->argsz); |
| errno = EINVAL; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int |
| handle_dma_unmap(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg, |
| struct vfio_user_dma_unmap *dma_unmap) |
| { |
| size_t out_size; |
| int ret = 0; |
| char rstr[1024]; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| assert(dma_unmap != NULL); |
| |
| if (!is_valid_unmap(vfu_ctx, msg, dma_unmap)) { |
| return -1; |
| } |
| |
| snprintf(rstr, sizeof(rstr), "[%#llx, %#llx) flags=%#x", |
| (ull_t)dma_unmap->addr, |
| (ull_t)(dma_unmap->addr + dma_unmap->size), |
| dma_unmap->flags); |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "removing DMA region %s", rstr); |
| |
| out_size = sizeof(*dma_unmap); |
| |
| if (dma_unmap->flags == VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP) { |
| out_size += sizeof(*dma_unmap->bitmap) + dma_unmap->bitmap->size; |
| } |
| |
| msg->out.iov.iov_base = malloc(out_size); |
| if (msg->out.iov.iov_base == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| memcpy(msg->out.iov.iov_base, dma_unmap, sizeof(*dma_unmap)); |
| |
| if (dma_unmap->flags == VFIO_DMA_UNMAP_FLAG_ALL) { |
| dma_controller_remove_all_regions(vfu_ctx->dma, |
| vfu_ctx->dma_unregister, vfu_ctx); |
| goto out; |
| } |
| |
| if (dma_unmap->flags & VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP) { |
| memcpy(msg->out.iov.iov_base + sizeof(*dma_unmap), dma_unmap->bitmap, sizeof(*dma_unmap->bitmap)); |
| ret = dma_controller_dirty_page_get(vfu_ctx->dma, |
| (vfu_dma_addr_t)(uintptr_t)dma_unmap->addr, |
| dma_unmap->size, |
| dma_unmap->bitmap->pgsize, |
| dma_unmap->bitmap->size, |
| msg->out.iov.iov_base + sizeof(*dma_unmap) + sizeof(*dma_unmap->bitmap)); |
| if (ret < 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "failed to get dirty page bitmap: %m"); |
| return -1; |
| } |
| } |
| |
| ret = dma_controller_remove_region(vfu_ctx->dma, |
| (vfu_dma_addr_t)(uintptr_t)dma_unmap->addr, |
| dma_unmap->size, |
| vfu_ctx->dma_unregister, |
| vfu_ctx); |
| if (ret < 0) { |
| ret = errno; |
| vfu_log(vfu_ctx, LOG_WARNING, |
| "failed to remove DMA region %s: %m", rstr); |
| return ERROR_INT(ret); |
| } |
| |
| out: |
| msg->out.iov.iov_len = out_size; |
| |
| return ret; |
| } |
| |
| int |
| call_reset_cb(vfu_ctx_t *vfu_ctx, vfu_reset_type_t reason) |
| { |
| int ret; |
| |
| if (vfu_ctx->reset == NULL) { |
| return 0; |
| } |
| |
| vfu_ctx->in_cb = CB_RESET; |
| ret = vfu_ctx->reset(vfu_ctx, reason); |
| vfu_ctx->in_cb = CB_NONE; |
| |
| return ret; |
| } |
| |
| static int |
| device_reset(vfu_ctx_t *vfu_ctx, vfu_reset_type_t reason) |
| { |
| int ret; |
| |
| ret = call_reset_cb(vfu_ctx, reason); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (vfu_ctx->migration != NULL) { |
| migr_state_transition(vfu_ctx->migration, |
| VFIO_USER_DEVICE_STATE_RUNNING); |
| } |
| return 0; |
| } |
| |
| static uint32_t |
| device_feature_flags_supported(vfu_ctx_t *vfu_ctx, uint32_t feature) |
| { |
| if (vfu_ctx->migration == NULL) { |
| /* |
| * All of the current features require migration. |
| */ |
| return 0; |
| } |
| |
| switch (feature) { |
| case VFIO_DEVICE_FEATURE_MIGRATION: |
| case VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT: |
| return VFIO_DEVICE_FEATURE_GET | VFIO_DEVICE_FEATURE_PROBE; |
| case VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE: |
| return VFIO_DEVICE_FEATURE_GET |
| | VFIO_DEVICE_FEATURE_SET |
| | VFIO_DEVICE_FEATURE_PROBE; |
| case VFIO_DEVICE_FEATURE_DMA_LOGGING_START: |
| case VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP: |
| return VFIO_DEVICE_FEATURE_SET | VFIO_DEVICE_FEATURE_PROBE; |
| default: |
| return 0; |
| }; |
| } |
| |
| static bool |
| is_migration_feature(uint32_t feature) |
| { |
| switch (feature) { |
| case VFIO_DEVICE_FEATURE_MIGRATION: |
| case VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool |
| is_dma_feature(uint32_t feature) |
| { |
| switch (feature) { |
| case VFIO_DEVICE_FEATURE_DMA_LOGGING_START: |
| case VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP: |
| case VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int |
| handle_migration_device_feature_get(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg, |
| struct vfio_user_device_feature *req) |
| { |
| /* |
| * All supported outgoing data is currently the same size as |
| * struct vfio_user_device_feature_migration. |
| */ |
| msg->out.iov.iov_len = sizeof(struct vfio_user_device_feature) |
| + sizeof(struct vfio_user_device_feature_migration); |
| |
| if (req->argsz < msg->out.iov.iov_len) { |
| iov_free(&msg->out.iov); |
| return ERROR_INT(EINVAL); |
| } |
| |
| msg->out.iov.iov_base = calloc(1, msg->out.iov.iov_len); |
| |
| if (msg->out.iov.iov_base == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| |
| memcpy(msg->out.iov.iov_base, msg->in.iov.iov_base, |
| sizeof(struct vfio_user_device_feature)); |
| |
| struct vfio_user_device_feature *res = msg->out.iov.iov_base; |
| res->argsz = msg->out.iov.iov_len; |
| |
| switch (req->flags & VFIO_DEVICE_FEATURE_MASK) { |
| case VFIO_DEVICE_FEATURE_MIGRATION: { |
| struct vfio_user_device_feature_migration *mig = |
| (void *)res->data; |
| // FIXME are these always supported? Can we consider to be |
| // "supported" if said support is just an empty callback? |
| // |
| // We don't need to return RUNNING or ERROR since they are |
| // always supported. |
| mig->flags = VFIO_MIGRATION_STOP_COPY |
| | VFIO_MIGRATION_PRE_COPY; |
| return 0; |
| } |
| |
| case VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE: { |
| struct vfio_user_device_feature_mig_state *state = |
| (void *)res->data; |
| state->device_state = migration_get_state(vfu_ctx); |
| return 0; |
| } |
| |
| default: |
| vfu_log(vfu_ctx, LOG_ERR, "invalid flags for migration GET (%d)", |
| req->flags); |
| return ERROR_INT(EINVAL); |
| } |
| } |
| |
| static int |
| handle_migration_device_feature_set(vfu_ctx_t *vfu_ctx, uint32_t feature, |
| struct vfio_user_device_feature *res) |
| { |
| assert(feature == VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE); |
| |
| struct vfio_user_device_feature_mig_state *state = (void *)res->data; |
| |
| return migration_set_state(vfu_ctx, state->device_state); |
| } |
| |
| static int |
| handle_dma_device_feature_get(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg, |
| struct vfio_user_device_feature *req) |
| { |
| const size_t header_size = sizeof(struct vfio_user_device_feature) |
| + sizeof(struct vfio_user_device_feature_dma_logging_report); |
| |
| struct vfio_user_device_feature_dma_logging_report *rep = |
| (void *)req->data; |
| |
| dma_controller_t *dma = vfu_ctx->dma; |
| |
| if (dma == NULL) { |
| vfu_log(vfu_ctx, LOG_ERR, "DMA not enabled for DMA device feature"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| ssize_t bitmap_size = get_bitmap_size(rep->length, rep->page_size); |
| if (bitmap_size < 0) { |
| return bitmap_size; |
| } |
| |
| msg->out.iov.iov_len = header_size + bitmap_size; |
| |
| if (req->argsz < msg->out.iov.iov_len) { |
| iov_free(&msg->out.iov); |
| return ERROR_INT(EINVAL); |
| } |
| |
| msg->out.iov.iov_base = calloc(1, msg->out.iov.iov_len); |
| |
| if (msg->out.iov.iov_base == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| |
| memcpy(msg->out.iov.iov_base, msg->in.iov.iov_base, header_size); |
| |
| struct vfio_user_device_feature *res = msg->out.iov.iov_base; |
| |
| res->argsz = msg->out.iov.iov_len; |
| |
| char *bitmap = (char *)msg->out.iov.iov_base + header_size; |
| |
| int ret = dma_controller_dirty_page_get(dma, |
| (vfu_dma_addr_t) rep->iova, |
| rep->length, |
| rep->page_size, |
| bitmap_size, |
| bitmap); |
| |
| if (ret < 0) { |
| iov_free(&msg->out.iov); |
| } |
| |
| return ret; |
| } |
| |
| static int |
| handle_dma_device_feature_set(vfu_ctx_t *vfu_ctx, uint32_t feature, |
| struct vfio_user_device_feature *res) |
| { |
| dma_controller_t *dma = vfu_ctx->dma; |
| |
| assert(dma != NULL); |
| |
| if (feature == VFIO_DEVICE_FEATURE_DMA_LOGGING_START) { |
| struct vfio_user_device_feature_dma_logging_control *ctl = |
| (void *)res->data; |
| return dma_controller_dirty_page_logging_start(dma, |
| ctl->page_size); |
| } |
| |
| assert(feature == VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP); |
| |
| dma_controller_dirty_page_logging_stop(dma); |
| return 0; |
| } |
| |
| static int |
| handle_device_feature(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| |
| if (msg->in.iov.iov_len < sizeof(struct vfio_user_device_feature)) { |
| vfu_log(vfu_ctx, LOG_ERR, "message too short (%ld)", |
| msg->in.iov.iov_len); |
| return ERROR_INT(EINVAL); |
| } |
| |
| struct vfio_user_device_feature *req = msg->in.iov.iov_base; |
| |
| uint32_t operations = req->flags & ~VFIO_DEVICE_FEATURE_MASK; |
| uint32_t feature = req->flags & VFIO_DEVICE_FEATURE_MASK; |
| |
| uint32_t supported_ops = device_feature_flags_supported(vfu_ctx, feature); |
| |
| if ((req->flags & supported_ops) != operations || supported_ops == 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "unsupported operation(s), flags=%d", |
| req->flags); |
| return ERROR_INT(EINVAL); |
| } |
| |
| ssize_t ret; |
| |
| switch (operations) { |
| case VFIO_DEVICE_FEATURE_GET: { |
| if (is_migration_feature(feature)) { |
| ret = handle_migration_device_feature_get(vfu_ctx, msg, req); |
| } else if (is_dma_feature(feature)) { |
| ret = handle_dma_device_feature_get(vfu_ctx, msg, req); |
| } else { |
| vfu_log(vfu_ctx, LOG_ERR, "unsupported feature %d for GET", |
| feature); |
| return ERROR_INT(EINVAL); |
| } |
| break; |
| } |
| |
| case VFIO_DEVICE_FEATURE_SET: { |
| msg->out.iov.iov_len = msg->in.iov.iov_len; |
| |
| if (req->argsz < msg->out.iov.iov_len) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad argsz (%d<%ld)", req->argsz, |
| msg->out.iov.iov_len); |
| iov_free(&msg->out.iov); |
| return ERROR_INT(EINVAL); |
| } |
| |
| msg->out.iov.iov_base = malloc(msg->out.iov.iov_len); |
| |
| if (msg->out.iov.iov_base == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| |
| memcpy(msg->out.iov.iov_base, msg->in.iov.iov_base, |
| msg->out.iov.iov_len); |
| |
| struct vfio_user_device_feature *res = msg->out.iov.iov_base; |
| |
| if (is_migration_feature(feature)) { |
| ret = handle_migration_device_feature_set(vfu_ctx, feature, res); |
| } else if (is_dma_feature(feature)) { |
| ret = handle_dma_device_feature_set(vfu_ctx, feature, res); |
| } else { |
| vfu_log(vfu_ctx, LOG_ERR, "unsupported feature %d for SET", |
| feature); |
| return ERROR_INT(EINVAL); |
| } |
| break; |
| } |
| |
| default: { |
| /* |
| * PROBE allows GET/SET to also be set (to specify which operations |
| * we want to probe the feature for), so we only check that PROBE |
| * is set, not that it is the only operation flag set. |
| */ |
| if (!(operations & VFIO_DEVICE_FEATURE_PROBE)) { |
| vfu_log(vfu_ctx, LOG_ERR, "no operation specified"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| msg->out.iov.iov_len = msg->in.iov.iov_len; |
| |
| if (req->argsz < msg->out.iov.iov_len) { |
| vfu_log(vfu_ctx, LOG_ERR, "bad argsz (%d<%ld)", req->argsz, |
| msg->out.iov.iov_len); |
| iov_free(&msg->out.iov); |
| return ERROR_INT(EINVAL); |
| } |
| |
| msg->out.iov.iov_base = malloc(msg->out.iov.iov_len); |
| |
| if (msg->out.iov.iov_base == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| |
| memcpy(msg->out.iov.iov_base, msg->in.iov.iov_base, |
| msg->out.iov.iov_len); |
| |
| ret = 0; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static vfu_msg_t * |
| alloc_msg(struct vfio_user_header *hdr, int *fds, size_t nr_fds) |
| { |
| vfu_msg_t *msg; |
| size_t i; |
| |
| msg = calloc(1, sizeof(*msg)); |
| |
| if (msg == NULL) { |
| return NULL; |
| } |
| |
| msg->hdr = *hdr; |
| msg->in.nr_fds = nr_fds; |
| |
| if (nr_fds > 0) { |
| msg->in.fds = calloc(msg->in.nr_fds, sizeof(int)); |
| |
| if (msg->in.fds == NULL) { |
| free(msg); |
| return NULL; |
| } |
| |
| for (i = 0; i < msg->in.nr_fds; i++) { |
| msg->in.fds[i] = fds[i]; |
| } |
| } |
| |
| return msg; |
| } |
| |
| static void |
| free_msg(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| int saved_errno = errno; |
| size_t i; |
| |
| if (msg == NULL) { |
| return; |
| } |
| |
| free(msg->in.iov.iov_base); |
| |
| for (i = 0; i < msg->in.nr_fds; i++) { |
| if (msg->in.fds[i] != -1 && msg->processed_cmd) { |
| vfu_log(vfu_ctx, LOG_DEBUG, |
| "closing unexpected fd %d (index %zu) from cmd %u", |
| msg->in.fds[i], i, msg->hdr.cmd); |
| } |
| close_safely(&msg->in.fds[i]); |
| } |
| |
| free(msg->in.fds); |
| free(msg->out.fds); |
| |
| assert(msg->out.iov.iov_base == NULL || msg->out_iovecs == NULL); |
| |
| free(msg->out.iov.iov_base); |
| |
| /* |
| * Each iov_base refers to data we don't want to free, but we *do* want to |
| * free the allocated array of iovecs if there is one. |
| */ |
| free(msg->out_iovecs); |
| |
| free(msg); |
| |
| errno = saved_errno; |
| } |
| |
| static int |
| do_reply(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg, int reply_errno) |
| { |
| int ret; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| |
| if (msg->hdr.flags & VFIO_USER_F_NO_REPLY) { |
| /* |
| * A failed client request is not a failure of handle_request() itself. |
| */ |
| return 0; |
| } |
| |
| ret = vfu_ctx->tran->reply(vfu_ctx, msg, reply_errno); |
| |
| if (ret < 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "failed to reply: %m"); |
| |
| if (errno == ECONNRESET || errno == ENOMSG) { |
| ret = vfu_reset_ctx(vfu_ctx, errno); |
| if (ret < 0) { |
| if (errno != EBUSY) { |
| vfu_log(vfu_ctx, LOG_WARNING, "failed to reset context: %m"); |
| } |
| return ret; |
| } |
| errno = ENOTCONN; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int |
| handle_request(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| int ret = 0; |
| |
| assert(vfu_ctx != NULL); |
| assert(msg != NULL); |
| |
| msg->processed_cmd = true; |
| |
| switch (msg->hdr.cmd) { |
| case VFIO_USER_DMA_MAP: |
| if (vfu_ctx->dma != NULL) { |
| ret = handle_dma_map(vfu_ctx, msg, msg->in.iov.iov_base); |
| } |
| break; |
| |
| case VFIO_USER_DMA_UNMAP: |
| if (vfu_ctx->dma != NULL) { |
| ret = handle_dma_unmap(vfu_ctx, msg, msg->in.iov.iov_base); |
| } |
| break; |
| |
| case VFIO_USER_DEVICE_GET_INFO: |
| ret = handle_device_get_info(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_DEVICE_GET_REGION_INFO: |
| ret = handle_device_get_region_info(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_DEVICE_GET_REGION_IO_FDS: |
| ret = handle_device_get_region_io_fds(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_DEVICE_GET_IRQ_INFO: |
| ret = handle_device_get_irq_info(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_DEVICE_SET_IRQS: |
| ret = handle_device_set_irqs(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_REGION_READ: |
| case VFIO_USER_REGION_WRITE: |
| ret = handle_region_access(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_DEVICE_RESET: |
| vfu_log(vfu_ctx, LOG_INFO, "device reset by client"); |
| ret = device_reset(vfu_ctx, VFU_RESET_DEVICE); |
| break; |
| |
| case VFIO_USER_DEVICE_FEATURE: |
| ret = handle_device_feature(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_MIG_DATA_READ: |
| ret = handle_mig_data_read(vfu_ctx, msg); |
| break; |
| |
| case VFIO_USER_MIG_DATA_WRITE: |
| ret = handle_mig_data_write(vfu_ctx, msg); |
| break; |
| |
| default: |
| msg->processed_cmd = false; |
| vfu_log(vfu_ctx, LOG_ERR, "bad command %d", msg->hdr.cmd); |
| ret = ERROR_INT(EINVAL); |
| break; |
| } |
| |
| if (ret < 0) { |
| vfu_log(vfu_ctx, LOG_ERR, "msg%#hx: cmd %d failed: %m", |
| msg->hdr.msg_id, msg->hdr.cmd); |
| } |
| |
| return do_reply(vfu_ctx, msg, ret == 0 ? 0 : errno); |
| } |
| |
| /* |
| * Note that we avoid any malloc() before we see data, as this is used for |
| * polling by SPDK. |
| */ |
| static int |
| get_request_header(vfu_ctx_t *vfu_ctx, vfu_msg_t **msgp) |
| { |
| int fds[VFIO_USER_CLIENT_MAX_MSG_FDS_LIMIT] = { 0 }; |
| struct vfio_user_header hdr = { 0, }; |
| size_t nr_fds = VFIO_USER_CLIENT_MAX_MSG_FDS_LIMIT; |
| size_t i; |
| int ret; |
| |
| ret = vfu_ctx->tran->get_request_header(vfu_ctx, &hdr, fds, &nr_fds); |
| |
| if (unlikely(ret < 0)) { |
| switch (errno) { |
| case EAGAIN: |
| return -1; |
| |
| case ENOMSG: |
| case ECONNRESET: |
| vfu_log(vfu_ctx, LOG_DEBUG, "failed to receive request header: %m"); |
| ret = vfu_reset_ctx(vfu_ctx, errno); |
| if (ret < 0) { |
| if (errno != EBUSY) { |
| vfu_log(vfu_ctx, LOG_WARNING, "failed to reset context: %m"); |
| } |
| return ret; |
| } |
| return ERROR_INT(ENOTCONN); |
| default: |
| vfu_log(vfu_ctx, LOG_ERR, "failed to receive request: %m"); |
| return -1; |
| } |
| } |
| |
| *msgp = alloc_msg(&hdr, fds, nr_fds); |
| |
| if (*msgp == NULL) { |
| for (i = 0; i < nr_fds; i++) { |
| close_safely(&fds[i]); |
| } |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static bool |
| is_valid_header(vfu_ctx_t *vfu_ctx, vfu_msg_t *msg) |
| { |
| if ((msg->hdr.flags & VFIO_USER_F_TYPE_MASK) != VFIO_USER_F_TYPE_COMMAND) { |
| vfu_log(vfu_ctx, LOG_ERR, "msg%#hx: not a command req", |
| msg->hdr.msg_id); |
| return false; |
| } |
| |
| if (msg->hdr.msg_size < sizeof(msg->hdr)) { |
| vfu_log(vfu_ctx, LOG_ERR, "msg%#hx: bad size %u in header", |
| msg->hdr.msg_id, msg->hdr.msg_size); |
| return false; |
| } else if (msg->hdr.msg_size == sizeof(msg->hdr) && |
| msg->hdr.cmd != VFIO_USER_DEVICE_RESET) { |
| vfu_log(vfu_ctx, LOG_ERR, "msg%#hx: no payload for cmd%u", |
| msg->hdr.msg_id, msg->hdr.cmd); |
| return false; |
| } else if (msg->hdr.msg_size > SERVER_MAX_MSG_SIZE) { |
| /* |
| * We know we can reject this: all normal requests shouldn't need this |
| * amount of space, including VFIO_USER_REGION_WRITE, which should be |
| * bound by max_data_xfer_size. |
| */ |
| vfu_log(vfu_ctx, LOG_ERR, "msg%#hx: size of %u is too large", |
| msg->hdr.msg_id, msg->hdr.msg_size); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool |
| MOCK_DEFINE(cmd_allowed_when_stopped_and_copying)(uint16_t cmd) |
| { |
| return cmd == VFIO_USER_REGION_READ || |
| cmd == VFIO_USER_REGION_WRITE || |
| cmd == VFIO_USER_DEVICE_FEATURE || |
| cmd == VFIO_USER_MIG_DATA_READ; |
| } |
| |
| bool |
| MOCK_DEFINE(should_exec_command)(vfu_ctx_t *vfu_ctx, uint16_t cmd) |
| { |
| if (device_is_stopped_and_copying(vfu_ctx->migration)) { |
| if (!cmd_allowed_when_stopped_and_copying(cmd)) { |
| vfu_log(vfu_ctx, LOG_ERR, |
| "bad command %d while device in stop-and-copy state", cmd); |
| return false; |
| } |
| } else if (device_is_stopped(vfu_ctx->migration)) { |
| if (!cmd_allowed_when_stopped_and_copying(cmd)) { |
| vfu_log(vfu_ctx, LOG_ERR, |
| "bad command %d while device in stopped state", cmd); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static bool |
| access_needs_quiesce(const vfu_ctx_t *vfu_ctx, size_t region_index, |
| uint64_t offset) |
| { |
| return access_is_pci_cap_exp(vfu_ctx, region_index, offset); |
| } |
| |
| static bool |
| command_needs_quiesce(vfu_ctx_t *vfu_ctx, const vfu_msg_t *msg) |
| { |
| struct vfio_user_region_access *reg; |
| struct vfio_user_device_feature *feature; |
| |
| if (vfu_ctx->quiesce == NULL) { |
| return false; |
| } |
| |
| switch (msg->hdr.cmd) { |
| case VFIO_USER_DMA_MAP: |
| case VFIO_USER_DMA_UNMAP: |
| return vfu_ctx->dma != NULL; |
| |
| case VFIO_USER_DEVICE_RESET: |
| return true; |
| |
| case VFIO_USER_REGION_WRITE: |
| if (msg->in.iov.iov_len < sizeof(*reg)) { |
| /* |
| * bad request, it will be eventually failed by |
| * handle_region_access |
| */ |
| return false; |
| } |
| reg = msg->in.iov.iov_base; |
| if (access_needs_quiesce(vfu_ctx, reg->region, reg->offset)) { |
| return true; |
| } |
| break; |
| |
| case VFIO_USER_DEVICE_FEATURE: |
| if (msg->in.iov.iov_len < sizeof(*feature)) { |
| /* |
| * bad request, it will be eventually failed by |
| * handle_region_access |
| */ |
| return false; |
| } |
| feature = msg->in.iov.iov_base; |
| if (migration_feature_needs_quiesce(feature)) { |
| return true; |
| } |
| break; |
| } |
| |
| |
| return false; |
| } |
| |
| /* |
| * Acquire a request from the vfio-user socket. Returns 0 on success, or -1 with |
| * errno set as follows: |
| * |
| * EAGAIN/EWOULDBLOCK: no request was ready to read from the socket |
| * ENOMSG: a message was read and replied to, no further handling is needed. |
| * E*: other errors that should be returned to the caller |
| */ |
| static int |
| get_request(vfu_ctx_t *vfu_ctx, vfu_msg_t **msgp) |
| { |
| vfu_msg_t *msg = NULL; |
| int ret; |
| |
| assert(vfu_ctx != NULL); |
| |
| *msgp = NULL; |
| |
| ret = get_request_header(vfu_ctx, &msg); |
| |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (!is_valid_header(vfu_ctx, msg)) { |
| ret = ERROR_INT(EINVAL); |
| goto err; |
| } |
| |
| msg->in.iov.iov_len = msg->hdr.msg_size - sizeof(msg->hdr); |
| |
| if (msg->in.iov.iov_len > 0) { |
| ret = vfu_ctx->tran->recv_body(vfu_ctx, msg); |
| |
| if (ret < 0) { |
| goto err; |
| } |
| } |
| |
| if (!should_exec_command(vfu_ctx, msg->hdr.cmd)) { |
| ret = ERROR_INT(EINVAL); |
| goto err; |
| } |
| |
| if (command_needs_quiesce(vfu_ctx, msg)) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "quiescing device"); |
| vfu_ctx->in_cb = CB_QUIESCE; |
| ret = vfu_ctx->quiesce(vfu_ctx); |
| vfu_ctx->in_cb = CB_NONE; |
| if (ret < 0) { |
| if (errno != EBUSY) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "device failed to quiesce: %m"); |
| goto err; |
| } |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "device will quiesce asynchronously"); |
| vfu_ctx->pending.state = VFU_CTX_PENDING_MSG; |
| vfu_ctx->pending.msg = msg; |
| /* NB the message is freed in vfu_device_quiesced */ |
| return ret; |
| } |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "device quiesced immediately"); |
| vfu_ctx->quiesced = true; |
| } |
| |
| *msgp = msg; |
| return 0; |
| |
| err: |
| ret = do_reply(vfu_ctx, msg, ret == 0 ? 0 : errno); |
| free_msg(vfu_ctx, msg); |
| if (ret != 0) { |
| return ret; |
| } |
| |
| /* We handled the message already. */ |
| return ERROR_INT(ENOMSG); |
| } |
| |
| EXPORT int |
| vfu_run_ctx(vfu_ctx_t *vfu_ctx) |
| { |
| int reqs_processed = 0; |
| bool blocking; |
| int err; |
| |
| assert(vfu_ctx != NULL); |
| |
| if (!vfu_ctx->realized) { |
| vfu_log(vfu_ctx, LOG_DEBUG, "device not realized"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| blocking = !(vfu_ctx->flags & LIBVFIO_USER_FLAG_ATTACH_NB); |
| |
| do { |
| vfu_msg_t *msg; |
| |
| if (vfu_ctx->pending.state != VFU_CTX_PENDING_NONE) { |
| return ERROR_INT(EBUSY); |
| } |
| |
| err = get_request(vfu_ctx, &msg); |
| |
| if (err == 0) { |
| err = handle_request(vfu_ctx, msg); |
| free_msg(vfu_ctx, msg); |
| reqs_processed++; |
| /* |
| * get_request might call the quiesce callback which might |
| * immediately quiesce the device, vfu_device_quiesced won't |
| * be called at all. |
| */ |
| if (vfu_ctx->quiesced) { |
| // FIXME? |
| vfu_log(vfu_ctx, LOG_DEBUG, "device unquiesced"); |
| vfu_ctx->quiesced = false; |
| } |
| } else { |
| /* |
| * If there was no request to read, or we already handled the |
| * (error) reply, that's not a failure of vfu_run_ctx() itself. |
| */ |
| switch (errno) { |
| case ENOMSG: |
| case EAGAIN: |
| err = 0; |
| break; |
| } |
| } |
| } while (err == 0 && blocking); |
| |
| return err == 0 ? reqs_processed : err; |
| } |
| |
| EXPORT int |
| vfu_realize_ctx(vfu_ctx_t *vfu_ctx) |
| { |
| vfu_reg_info_t *cfg_reg; |
| uint32_t max_ivs = 0, i; |
| size_t size; |
| |
| if (vfu_ctx->realized) { |
| return 0; |
| } |
| |
| cfg_reg = &vfu_ctx->reg_info[VFU_PCI_DEV_CFG_REGION_IDX]; |
| |
| // Set a default config region if none provided. |
| if (cfg_reg->size == 0) { |
| cfg_reg->flags = VFU_REGION_FLAG_RW; |
| cfg_reg->size = PCI_CFG_SPACE_SIZE; |
| } |
| |
| // This may have been allocated by vfu_setup_pci_config_hdr(). |
| if (vfu_ctx->pci.config_space == NULL) { |
| vfu_ctx->pci.config_space = calloc(1, cfg_reg->size); |
| if (vfu_ctx->pci.config_space == NULL) { |
| return ERROR_INT(ENOMEM); |
| } |
| } |
| |
| // Set type for region registers. |
| for (i = 0; i < PCI_BARS_NR; i++) { |
| if (!(vfu_ctx->reg_info[i].flags & VFU_REGION_FLAG_MEM)) { |
| vfu_ctx->pci.config_space->hdr.bars[i].io.region_type |= 0x1; |
| } |
| } |
| |
| if (vfu_ctx->irqs == NULL) { |
| /* |
| * FIXME need to check that the number of MSI and MSI-X IRQs are valid |
| * (1, 2, 4, 8, 16 or 32 for MSI and up to 2048 for MSI-X). |
| */ |
| |
| // Work out highest count of irq vectors. |
| for (i = 0; i < VFU_DEV_NUM_IRQS; i++) { |
| if (max_ivs < vfu_ctx->irq_count[i]) { |
| max_ivs = vfu_ctx->irq_count[i]; |
| } |
| } |
| |
| // FIXME: assert(max_ivs > 0)? |
| size = sizeof(int) * max_ivs; |
| vfu_ctx->irqs = calloc(1, sizeof(vfu_irqs_t) + size); |
| if (vfu_ctx->irqs == NULL) { |
| // vfu_ctx->pci.config_space should be free'ed by vfu_destroy_ctx(). |
| return -1; |
| } |
| |
| // Set context irq information. |
| for (i = 0; i < max_ivs; i++) { |
| vfu_ctx->irqs->efds[i] = -1; |
| } |
| vfu_ctx->irqs->err_efd = -1; |
| vfu_ctx->irqs->req_efd = -1; |
| vfu_ctx->irqs->max_ivs = max_ivs; |
| |
| // Reflect on the config space whether INTX is available. |
| if (vfu_ctx->irq_count[VFU_DEV_INTX_IRQ] != 0) { |
| vfu_ctx->pci.config_space->hdr.intr.ipin = 1; // INTA# |
| } |
| } |
| |
| if (vfu_ctx->pci.nr_caps != 0) { |
| vfu_ctx->pci.config_space->hdr.sts.cl = 0x1; |
| } |
| |
| vfu_ctx->realized = true; |
| |
| return 0; |
| } |
| |
| static void |
| free_sparse_mmap_areas(vfu_ctx_t *vfu_ctx) |
| { |
| int i; |
| |
| assert(vfu_ctx != NULL); |
| |
| for (i = 0; i < (int)vfu_ctx->nr_regions; i++) { |
| free(vfu_ctx->reg_info[i].mmap_areas); |
| } |
| } |
| |
| static void |
| vfu_reset_ctx_quiesced(vfu_ctx_t *vfu_ctx) |
| { |
| if (vfu_ctx->dma != NULL) { |
| dma_controller_remove_all_regions(vfu_ctx->dma, vfu_ctx->dma_unregister, |
| vfu_ctx); |
| } |
| |
| /* FIXME what happens if the device reset callback fails? */ |
| device_reset(vfu_ctx, VFU_RESET_LOST_CONN); |
| |
| if (vfu_ctx->irqs != NULL) { |
| irqs_reset(vfu_ctx); |
| } |
| |
| if (vfu_ctx->tran->detach != NULL) { |
| vfu_ctx->tran->detach(vfu_ctx); |
| } |
| } |
| |
| static int |
| vfu_reset_ctx(vfu_ctx_t *vfu_ctx, int reason) |
| { |
| vfu_log(vfu_ctx, LOG_INFO, "%s: %s", __func__, strerror(reason)); |
| |
| if (vfu_ctx->quiesce != NULL |
| && vfu_ctx->pending.state == VFU_CTX_PENDING_NONE) { |
| vfu_ctx->in_cb = CB_QUIESCE; |
| int ret = vfu_ctx->quiesce(vfu_ctx); |
| vfu_ctx->in_cb = CB_NONE; |
| if (ret < 0) { |
| if (errno == EBUSY) { |
| vfu_ctx->pending.state = VFU_CTX_PENDING_CTX_RESET; |
| return ret; |
| } |
| vfu_log(vfu_ctx, LOG_ERR, "failed to quiesce device: %m"); |
| return ret; |
| } |
| } |
| vfu_reset_ctx_quiesced(vfu_ctx); |
| return 0; |
| } |
| |
| EXPORT void |
| vfu_destroy_ctx(vfu_ctx_t *vfu_ctx) |
| { |
| if (vfu_ctx == NULL) { |
| return; |
| } |
| |
| vfu_ctx->quiesce = NULL; |
| if (vfu_reset_ctx(vfu_ctx, ESHUTDOWN) < 0) { |
| vfu_log(vfu_ctx, LOG_WARNING, "failed to reset context: %m"); |
| } |
| |
| free(vfu_ctx->pci.config_space); |
| |
| if (vfu_ctx->tran->fini != NULL) { |
| vfu_ctx->tran->fini(vfu_ctx); |
| } |
| |
| if (vfu_ctx->dma != NULL) { |
| dma_controller_destroy(vfu_ctx->dma); |
| } |
| free_sparse_mmap_areas(vfu_ctx); |
| free_regions(vfu_ctx); |
| free(vfu_ctx->migration); |
| free(vfu_ctx->irqs); |
| free(vfu_ctx->uuid); |
| free(vfu_ctx); |
| } |
| |
| EXPORT void * |
| vfu_get_private(vfu_ctx_t *vfu_ctx) |
| { |
| assert(vfu_ctx != NULL); |
| |
| return vfu_ctx->pvt; |
| } |
| |
| EXPORT vfu_ctx_t * |
| vfu_create_ctx(vfu_trans_t trans, const char *path, int flags, void *pvt, |
| vfu_dev_type_t dev_type) |
| { |
| vfu_ctx_t *vfu_ctx = NULL; |
| int err = 0; |
| size_t i; |
| |
| if ((flags & ~(LIBVFIO_USER_FLAG_ATTACH_NB)) != 0) { |
| return ERROR_PTR(EINVAL); |
| } |
| |
| #ifdef WITH_TRAN_PIPE |
| if (trans != VFU_TRANS_SOCK && trans != VFU_TRANS_PIPE) { |
| return ERROR_PTR(ENOTSUP); |
| } |
| #else |
| if (trans != VFU_TRANS_SOCK) { |
| return ERROR_PTR(ENOTSUP); |
| } |
| #endif |
| |
| if (dev_type != VFU_DEV_TYPE_PCI) { |
| return ERROR_PTR(ENOTSUP); |
| } |
| |
| vfu_ctx = calloc(1, sizeof(vfu_ctx_t)); |
| if (vfu_ctx == NULL) { |
| return NULL; |
| } |
| |
| vfu_ctx->dev_type = dev_type; |
| if (trans == VFU_TRANS_SOCK) { |
| vfu_ctx->tran = &tran_sock_ops; |
| } else { |
| #ifdef WITH_TRAN_PIPE |
| vfu_ctx->tran = &tran_pipe_ops; |
| #endif |
| } |
| vfu_ctx->tran_data = NULL; |
| vfu_ctx->pvt = pvt; |
| vfu_ctx->flags = flags; |
| vfu_ctx->log_level = LOG_ERR; |
| vfu_ctx->pci_cap_exp_off = -1; |
| |
| vfu_ctx->uuid = strdup(path); |
| if (vfu_ctx->uuid == NULL) { |
| goto err_out; |
| } |
| |
| /* |
| * FIXME: Now we always allocate for migration region. Check if its better |
| * to separate migration region from standard regions in vfu_ctx.reg_info |
| * and move it into vfu_ctx.migration. |
| */ |
| vfu_ctx->nr_regions = VFU_PCI_DEV_NUM_REGIONS; |
| vfu_ctx->reg_info = calloc(vfu_ctx->nr_regions, sizeof(*vfu_ctx->reg_info)); |
| if (vfu_ctx->reg_info == NULL) { |
| goto err_out; |
| } |
| |
| for (i = 0; i < vfu_ctx->nr_regions; i++) { |
| vfu_ctx->reg_info[i].fd = -1; |
| LIST_INIT(&vfu_ctx->reg_info[i].subregions); |
| } |
| |
| if (vfu_setup_device_nr_irqs(vfu_ctx, VFU_DEV_ERR_IRQ, 1) == -1) { |
| goto err_out; |
| } |
| if (vfu_setup_device_nr_irqs(vfu_ctx, VFU_DEV_REQ_IRQ, 1) == -1) { |
| goto err_out; |
| } |
| |
| if (vfu_ctx->tran->init != NULL) { |
| err = vfu_ctx->tran->init(vfu_ctx); |
| if (err < 0) { |
| goto err_out; |
| } |
| } |
| |
| return vfu_ctx; |
| |
| err_out: |
| err = errno; |
| |
| vfu_destroy_ctx(vfu_ctx); |
| |
| return ERROR_PTR(err); |
| } |
| |
| EXPORT int |
| vfu_attach_ctx(vfu_ctx_t *vfu_ctx) |
| { |
| |
| assert(vfu_ctx != NULL); |
| |
| return vfu_ctx->tran->attach(vfu_ctx); |
| } |
| |
| EXPORT int |
| vfu_get_poll_fd(vfu_ctx_t *vfu_ctx) |
| { |
| |
| assert(vfu_ctx != NULL); |
| |
| return vfu_ctx->tran->get_poll_fd(vfu_ctx); |
| } |
| |
| EXPORT int |
| vfu_setup_log(vfu_ctx_t *vfu_ctx, vfu_log_fn_t *log, int log_level) |
| { |
| if (log_level < LOG_EMERG || log_level > LOG_DEBUG) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_ctx->log = log; |
| vfu_ctx->log_level = log_level; |
| |
| return 0; |
| } |
| |
| static int |
| copyin_mmap_areas(vfu_reg_info_t *reg_info, |
| struct iovec *mmap_areas, uint32_t nr_mmap_areas) |
| { |
| size_t size = nr_mmap_areas * sizeof(*mmap_areas); |
| |
| if (mmap_areas == NULL || nr_mmap_areas == 0) { |
| return 0; |
| } |
| |
| reg_info->mmap_areas = malloc(size); |
| |
| if (reg_info->mmap_areas == NULL) { |
| return -1; |
| } |
| |
| memcpy(reg_info->mmap_areas, mmap_areas, size); |
| reg_info->nr_mmap_areas = nr_mmap_areas; |
| |
| return 0; |
| } |
| |
| EXPORT int |
| vfu_setup_region(vfu_ctx_t *vfu_ctx, int region_idx, size_t size, |
| vfu_region_access_cb_t *cb, int flags, |
| struct iovec *mmap_areas, uint32_t nr_mmap_areas, |
| int fd, uint64_t offset) |
| { |
| struct iovec whole_region = { .iov_base = 0, .iov_len = size }; |
| vfu_reg_info_t *reg; |
| size_t i; |
| int ret = 0; |
| |
| assert(vfu_ctx != NULL); |
| |
| if ((flags & ~(VFU_REGION_FLAG_MASK)) || |
| (!(flags & VFU_REGION_FLAG_RW))) { |
| vfu_log(vfu_ctx, LOG_ERR, "invalid region flags"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| if ((flags & VFU_REGION_FLAG_ALWAYS_CB) && (cb == NULL)) { |
| vfu_log(vfu_ctx, LOG_ERR, "VFU_REGION_FLAG_ALWAYS_CB needs callback"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| if ((mmap_areas == NULL) != (nr_mmap_areas == 0) || |
| (mmap_areas != NULL && fd == -1)) { |
| vfu_log(vfu_ctx, LOG_ERR, "invalid mappable region arguments"); |
| return ERROR_INT(EINVAL); |
| } |
| |
| if (region_idx < VFU_PCI_DEV_BAR0_REGION_IDX || |
| region_idx >= VFU_PCI_DEV_NUM_REGIONS) { |
| vfu_log(vfu_ctx, LOG_ERR, "invalid region index %d", region_idx); |
| return ERROR_INT(EINVAL); |
| } |
| |
| /* |
| * PCI config space is never mappable or of type mem. |
| */ |
| if (region_idx == VFU_PCI_DEV_CFG_REGION_IDX && |
| (((flags & VFU_REGION_FLAG_RW) != VFU_REGION_FLAG_RW) || |
| (flags & VFU_REGION_FLAG_MEM))) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| for (i = 0; i < nr_mmap_areas; i++) { |
| struct iovec *iov = &mmap_areas[i]; |
| if ((size_t)iov_end(iov) > size) { |
| vfu_log(vfu_ctx, LOG_ERR, "mmap area #%zu %#llx-%#llx exceeds region size of %#llx\n", |
| i, (unsigned long long)(uintptr_t)iov->iov_base, |
| (unsigned long long)(uintptr_t)(iov->iov_base) + iov->iov_len - 1, |
| (unsigned long long)size); |
| return ERROR_INT(EINVAL); |
| } |
| } |
| |
| reg = &vfu_ctx->reg_info[region_idx]; |
| |
| reg->flags = flags; |
| reg->size = size; |
| reg->cb = cb; |
| reg->fd = fd; |
| reg->offset = offset; |
| |
| if (mmap_areas == NULL && reg->fd != -1) { |
| mmap_areas = &whole_region; |
| nr_mmap_areas = 1; |
| } |
| |
| if (nr_mmap_areas > 0) { |
| ret = copyin_mmap_areas(reg, mmap_areas, nr_mmap_areas); |
| if (ret < 0) { |
| goto err; |
| } |
| } |
| |
| return 0; |
| |
| err: |
| ret = errno; |
| free(reg->mmap_areas); |
| memset(reg, 0, sizeof(*reg)); |
| return ERROR_INT(ret); |
| } |
| |
| EXPORT int |
| vfu_setup_device_reset_cb(vfu_ctx_t *vfu_ctx, vfu_reset_cb_t *reset) |
| { |
| assert(vfu_ctx != NULL); |
| vfu_ctx->reset = reset; |
| return 0; |
| } |
| |
| EXPORT void |
| vfu_setup_device_quiesce_cb(vfu_ctx_t *vfu_ctx, vfu_device_quiesce_cb_t *quiesce) |
| { |
| assert(vfu_ctx != NULL); |
| vfu_ctx->quiesce = quiesce; |
| } |
| |
| EXPORT int |
| vfu_setup_device_dma(vfu_ctx_t *vfu_ctx, vfu_dma_register_cb_t *dma_register, |
| vfu_dma_unregister_cb_t *dma_unregister) |
| { |
| |
| assert(vfu_ctx != NULL); |
| |
| // Create the internal DMA controller. |
| vfu_ctx->dma = dma_controller_create(vfu_ctx, MAX_DMA_REGIONS, |
| MAX_DMA_SIZE); |
| if (vfu_ctx->dma == NULL) { |
| return ERROR_INT(errno); |
| } |
| |
| vfu_ctx->dma_register = dma_register; |
| vfu_ctx->dma_unregister = dma_unregister; |
| |
| return 0; |
| } |
| |
| EXPORT int |
| vfu_setup_device_nr_irqs(vfu_ctx_t *vfu_ctx, enum vfu_dev_irq_type type, |
| uint32_t count) |
| { |
| |
| assert(vfu_ctx != NULL); |
| |
| if (type >= VFU_DEV_NUM_IRQS) { |
| vfu_log(vfu_ctx, LOG_ERR, "Invalid IRQ type index %u", type); |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_ctx->irq_count[type] = count; |
| |
| return 0; |
| } |
| |
| EXPORT int |
| vfu_setup_irq_state_callback(vfu_ctx_t *vfu_ctx, enum vfu_dev_irq_type type, |
| vfu_dev_irq_state_cb_t *cb) |
| { |
| assert(vfu_ctx != NULL); |
| |
| if (type >= VFU_DEV_NUM_IRQS) { |
| vfu_log(vfu_ctx, LOG_ERR, "Invalid IRQ type index %u", type); |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_ctx->irq_state_cbs[type] = cb; |
| |
| return 0; |
| } |
| |
| EXPORT int |
| vfu_setup_device_migration_callbacks(vfu_ctx_t *vfu_ctx, |
| const vfu_migration_callbacks_t *callbacks) |
| { |
| int ret = 0; |
| |
| assert(vfu_ctx != NULL); |
| assert(callbacks != NULL); |
| |
| if (callbacks->version != VFU_MIGR_CALLBACKS_VERS) { |
| vfu_log(vfu_ctx, LOG_ERR, "unsupported migration callbacks version %d", |
| callbacks->version); |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_ctx->migration = init_migration(callbacks, &ret); |
| if (vfu_ctx->migration == NULL) { |
| vfu_log(vfu_ctx, LOG_ERR, "failed to initialize device migration"); |
| return ERROR_INT(ret); |
| } |
| |
| return 0; |
| } |
| |
| #ifdef DEBUG |
| static void |
| quiesce_check_allowed(vfu_ctx_t *vfu_ctx, const char *func) |
| { |
| if (!(vfu_ctx->in_cb != CB_NONE || |
| vfu_ctx->quiesce == NULL || |
| !vfu_ctx->quiesced)) { |
| vfu_log(vfu_ctx, LOG_ERR, |
| "illegal function %s() in quiesced state", func); |
| abort(); |
| } |
| } |
| #endif |
| |
| EXPORT int |
| vfu_addr_to_sgl(vfu_ctx_t *vfu_ctx, vfu_dma_addr_t dma_addr, |
| size_t len, dma_sg_t *sgl, size_t max_nr_sgs, int prot) |
| { |
| #ifdef DEBUG |
| assert(vfu_ctx != NULL); |
| |
| if (unlikely(vfu_ctx->dma == NULL)) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| quiesce_check_allowed(vfu_ctx, __func__); |
| #endif |
| |
| return dma_addr_to_sgl(vfu_ctx->dma, dma_addr, len, sgl, max_nr_sgs, prot); |
| } |
| |
| EXPORT int |
| vfu_sgl_get(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, struct iovec *iov, size_t cnt, |
| int flags UNUSED) |
| { |
| #ifdef DEBUG |
| if (unlikely(vfu_ctx->dma_unregister == NULL) || flags != 0) { |
| return ERROR_INT(EINVAL); |
| } |
| |
| quiesce_check_allowed(vfu_ctx, __func__); |
| #endif |
| |
| return dma_sgl_get(vfu_ctx->dma, sgl, iov, cnt); |
| } |
| |
| EXPORT void |
| vfu_sgl_mark_dirty(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, size_t cnt) |
| { |
| #ifdef DEBUG |
| if (unlikely(vfu_ctx->dma_unregister == NULL)) { |
| return; |
| } |
| |
| quiesce_check_allowed(vfu_ctx, __func__); |
| #endif |
| |
| return dma_sgl_mark_dirty(vfu_ctx->dma, sgl, cnt); |
| } |
| |
| EXPORT void |
| vfu_sgl_put(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, |
| struct iovec *iov UNUSED, size_t cnt) |
| { |
| #ifdef DEBUG |
| if (unlikely(vfu_ctx->dma_unregister == NULL)) { |
| return; |
| } |
| |
| quiesce_check_allowed(vfu_ctx, __func__); |
| #endif |
| |
| return dma_sgl_put(vfu_ctx->dma, sgl, cnt); |
| } |
| |
| static int |
| vfu_dma_transfer(vfu_ctx_t *vfu_ctx, enum vfio_user_command cmd, |
| dma_sg_t *sg, void *data) |
| { |
| struct vfio_user_dma_region_access *dma_reply; |
| struct vfio_user_dma_region_access *dma_req; |
| struct vfio_user_dma_region_access dma; |
| static int msg_id = 1; |
| size_t remaining; |
| size_t count; |
| size_t rlen; |
| void *rbuf; |
| |
| assert(cmd == VFIO_USER_DMA_READ || cmd == VFIO_USER_DMA_WRITE); |
| assert(vfu_ctx != NULL); |
| assert(sg != NULL); |
| |
| if (cmd == VFIO_USER_DMA_WRITE && !sg->writeable) { |
| return ERROR_INT(EPERM); |
| } |
| |
| rlen = sizeof(struct vfio_user_dma_region_access) + |
| MIN(sg->length, vfu_ctx->client_max_data_xfer_size); |
| |
| rbuf = calloc(1, rlen); |
| |
| if (rbuf == NULL) { |
| return -1; |
| } |
| |
| remaining = sg->length; |
| count = 0; |
| |
| if (cmd == VFIO_USER_DMA_READ) { |
| dma_req = &dma; |
| dma_reply = rbuf; |
| } else { |
| dma_req = rbuf; |
| dma_reply = &dma; |
| } |
| |
| while (remaining > 0) { |
| int ret; |
| |
| dma_req->addr = (uintptr_t)sg->dma_addr + sg->offset + count; |
| dma_req->count = MIN(remaining, vfu_ctx->client_max_data_xfer_size); |
| |
| if (cmd == VFIO_USER_DMA_WRITE) { |
| memcpy(rbuf + sizeof(*dma_req), data + count, dma_req->count); |
| |
| ret = vfu_ctx->tran->send_msg(vfu_ctx, msg_id++, |
| VFIO_USER_DMA_WRITE, rbuf, |
| dma_req->count + sizeof(*dma_req), NULL, |
| dma_reply, sizeof(*dma_reply)); |
| } else { |
| ret = vfu_ctx->tran->send_msg(vfu_ctx, msg_id++, VFIO_USER_DMA_READ, |
| dma_req, sizeof(*dma_req), NULL, rbuf, |
| dma_req->count + sizeof(*dma_reply)); |
| } |
| |
| if (ret < 0) { |
| ret = errno; |
| if (ret == ENOMSG || ret == ECONNRESET) { |
| if (vfu_reset_ctx(vfu_ctx, ret) < 0) { |
| vfu_log(vfu_ctx, LOG_WARNING, "failed to reset context: %m"); |
| } |
| ret = ENOTCONN; |
| } |
| free(rbuf); |
| return ERROR_INT(ret); |
| } |
| |
| if (dma_reply->addr != dma_req->addr || |
| dma_reply->count != dma_req->count) { |
| /* TODO shouldn't we use %#llx for both and also use the range format? */ |
| vfu_log(vfu_ctx, LOG_ERR, "bad reply to DMA transfer: " |
| "request:%#llx,%llu reply:%#llx,%llu", |
| (ull_t)dma_req->addr, |
| (ull_t)dma_req->count, |
| (ull_t)dma_reply->addr, |
| (ull_t)dma_reply->count); |
| free(rbuf); |
| return ERROR_INT(EINVAL); |
| } |
| |
| if (cmd == VFIO_USER_DMA_READ) { |
| memcpy(data + count, rbuf + sizeof(*dma_reply), dma_req->count); |
| } |
| |
| count += dma_req->count; |
| remaining -= dma_req->count; |
| } |
| |
| free(rbuf); |
| return 0; |
| } |
| |
| EXPORT int |
| vfu_sgl_read(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, size_t cnt, void *data) |
| { |
| assert(vfu_ctx->pending.state == VFU_CTX_PENDING_NONE); |
| |
| /* Not currently implemented. */ |
| if (cnt != 1) { |
| return ERROR_INT(ENOTSUP); |
| } |
| |
| return vfu_dma_transfer(vfu_ctx, VFIO_USER_DMA_READ, sgl, data); |
| } |
| |
| EXPORT int |
| vfu_sgl_write(vfu_ctx_t *vfu_ctx, dma_sg_t *sgl, size_t cnt, void *data) |
| { |
| assert(vfu_ctx->pending.state == VFU_CTX_PENDING_NONE); |
| |
| /* Not currently implemented. */ |
| if (cnt != 1) { |
| return ERROR_INT(ENOTSUP); |
| } |
| |
| return vfu_dma_transfer(vfu_ctx, VFIO_USER_DMA_WRITE, sgl, data); |
| } |
| |
| EXPORT bool |
| vfu_sg_is_mappable(vfu_ctx_t *vfu_ctx, dma_sg_t *sg) |
| { |
| return dma_sg_is_mappable(vfu_ctx->dma, sg); |
| } |
| |
| EXPORT int |
| vfu_device_quiesced(vfu_ctx_t *vfu_ctx, int quiesce_errno) |
| { |
| int ret; |
| |
| assert(vfu_ctx != NULL); |
| |
| if (vfu_ctx->quiesce == NULL |
| || vfu_ctx->pending.state == VFU_CTX_PENDING_NONE) { |
| vfu_log(vfu_ctx, LOG_DEBUG, |
| "invalid call to quiesce callback, state=%d", |
| vfu_ctx->pending.state); |
| return ERROR_INT(EINVAL); |
| } |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "device quiesced with error=%d", quiesce_errno); |
| vfu_ctx->quiesced = true; |
| |
| if (quiesce_errno == 0) { |
| switch (vfu_ctx->pending.state) { |
| case VFU_CTX_PENDING_MSG: |
| ret = handle_request(vfu_ctx, vfu_ctx->pending.msg); |
| free_msg(vfu_ctx, vfu_ctx->pending.msg); |
| break; |
| case VFU_CTX_PENDING_CTX_RESET: |
| vfu_reset_ctx_quiesced(vfu_ctx); |
| ret = 0; |
| break; |
| default: |
| assert(false); |
| } |
| } else { |
| ret = 0; |
| free_msg(vfu_ctx, vfu_ctx->pending.msg); |
| } |
| |
| vfu_ctx->pending.msg = NULL; |
| vfu_ctx->pending.state = VFU_CTX_PENDING_NONE; |
| |
| vfu_log(vfu_ctx, LOG_DEBUG, "device unquiesced"); |
| vfu_ctx->quiesced = false; |
| |
| return ret; |
| } |
| |
| /* ex: set tabstop=4 shiftwidth=4 softtabstop=4 expandtab: */ |