| #ifndef _LAN78XX_H |
| #define _LAN78XX_H |
| |
| /** @file |
| * |
| * Microchip LAN78xx USB Ethernet driver |
| * |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); |
| |
| #include "smscusb.h" |
| #include "smsc75xx.h" |
| |
| /** Hardware configuration register */ |
| #define LAN78XX_HW_CFG 0x0010 |
| #define LAN78XX_HW_CFG_LED1_EN 0x00200000UL /**< LED1 enable */ |
| #define LAN78XX_HW_CFG_LED0_EN 0x00100000UL /**< LED1 enable */ |
| #define LAN78XX_HW_CFG_LRST 0x00000002UL /**< Soft lite reset */ |
| |
| /** Interrupt endpoint control register */ |
| #define LAN78XX_INT_EP_CTL 0x0098 |
| #define LAN78XX_INT_EP_CTL_RDFO_EN 0x00400000UL /**< RX FIFO overflow */ |
| #define LAN78XX_INT_EP_CTL_PHY_EN 0x00020000UL /**< PHY interrupt */ |
| |
| /** Bulk IN delay register */ |
| #define LAN78XX_BULK_IN_DLY 0x0094 |
| #define LAN78XX_BULK_IN_DLY_SET(ticks) ( (ticks) << 0 ) /**< Delay / 16.7ns */ |
| |
| /** EEPROM register base */ |
| #define LAN78XX_E2P_BASE 0x0040 |
| |
| /** USB configuration register 0 */ |
| #define LAN78XX_USB_CFG0 0x0080 |
| #define LAN78XX_USB_CFG0_BIR 0x00000040UL /**< Bulk IN use NAK */ |
| |
| /** Receive filtering engine control register */ |
| #define LAN78XX_RFE_CTL 0x00b0 |
| #define LAN78XX_RFE_CTL_AB 0x00000400UL /**< Accept broadcast */ |
| #define LAN78XX_RFE_CTL_AM 0x00000200UL /**< Accept multicast */ |
| #define LAN78XX_RFE_CTL_AU 0x00000100UL /**< Accept unicast */ |
| |
| /** FIFO controller RX FIFO control register */ |
| #define LAN78XX_FCT_RX_CTL 0x00c0 |
| #define LAN78XX_FCT_RX_CTL_EN 0x80000000UL /**< FCT RX enable */ |
| #define LAN78XX_FCT_RX_CTL_BAD 0x02000000UL /**< Store bad frames */ |
| |
| /** FIFO controller TX FIFO control register */ |
| #define LAN78XX_FCT_TX_CTL 0x00c4 |
| #define LAN78XX_FCT_TX_CTL_EN 0x80000000UL /**< FCT TX enable */ |
| |
| /** MAC receive register */ |
| #define LAN78XX_MAC_RX 0x0104 |
| #define LAN78XX_MAC_RX_MAX_SIZE(mtu) ( (mtu) << 16 ) /**< Max frame size */ |
| #define LAN78XX_MAC_RX_MAX_SIZE_DEFAULT \ |
| LAN78XX_MAC_RX_MAX_SIZE ( ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */ ) |
| #define LAN78XX_MAC_RX_FCS 0x00000010UL /**< FCS stripping */ |
| #define LAN78XX_MAC_RX_EN 0x00000001UL /**< RX enable */ |
| |
| /** MAC transmit register */ |
| #define LAN78XX_MAC_TX 0x0108 |
| #define LAN78XX_MAC_TX_EN 0x00000001UL /**< TX enable */ |
| |
| /** MAC receive address register base */ |
| #define LAN78XX_RX_ADDR_BASE 0x0118 |
| |
| /** MII register base */ |
| #define LAN78XX_MII_BASE 0x0120 |
| |
| /** PHY interrupt mask MII register */ |
| #define LAN78XX_MII_PHY_INTR_MASK 25 |
| |
| /** PHY interrupt source MII register */ |
| #define LAN78XX_MII_PHY_INTR_SOURCE 26 |
| |
| /** PHY interrupt: global enable */ |
| #define LAN78XX_PHY_INTR_ENABLE 0x8000 |
| |
| /** PHY interrupt: link state change */ |
| #define LAN78XX_PHY_INTR_LINK 0x2000 |
| |
| /** PHY interrupt: auto-negotiation failure */ |
| #define LAN78XX_PHY_INTR_ANEG_ERR 0x0800 |
| |
| /** PHY interrupt: auto-negotiation complete */ |
| #define LAN78XX_PHY_INTR_ANEG_DONE 0x0400 |
| |
| /** MAC address perfect filter register base */ |
| #define LAN78XX_ADDR_FILT_BASE 0x0400 |
| |
| /** OTP register base */ |
| #define LAN78XX_OTP_BASE 0x1000 |
| |
| /** Maximum time to wait for reset (in milliseconds) */ |
| #define LAN78XX_RESET_MAX_WAIT_MS 100 |
| |
| #endif /* _LAN78XX_H */ |