| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); |
| |
| #include <stdint.h> |
| #include <ipxe/pci.h> |
| |
| static int pci_find_capability_common ( struct pci_device *pci, |
| uint8_t pos, int cap ) { |
| uint8_t id; |
| int ttl = 48; |
| |
| while ( ttl-- && pos >= 0x40 ) { |
| pos &= ~3; |
| pci_read_config_byte ( pci, pos + PCI_CAP_ID, &id ); |
| DBG ( "PCI Capability: %d\n", id ); |
| if ( id == 0xff ) |
| break; |
| if ( id == cap ) |
| return pos; |
| pci_read_config_byte ( pci, pos + PCI_CAP_NEXT, &pos ); |
| } |
| return 0; |
| } |
| |
| /** |
| * Look for a PCI capability |
| * |
| * @v pci PCI device to query |
| * @v cap Capability code |
| * @ret address Address of capability, or 0 if not found |
| * |
| * Determine whether or not a device supports a given PCI capability. |
| * Returns the address of the requested capability structure within |
| * the device's PCI configuration space, or 0 if the device does not |
| * support it. |
| */ |
| int pci_find_capability ( struct pci_device *pci, int cap ) { |
| uint16_t status; |
| uint8_t pos; |
| uint8_t hdr_type; |
| |
| pci_read_config_word ( pci, PCI_STATUS, &status ); |
| if ( ! ( status & PCI_STATUS_CAP_LIST ) ) |
| return 0; |
| |
| pci_read_config_byte ( pci, PCI_HEADER_TYPE, &hdr_type ); |
| switch ( hdr_type & PCI_HEADER_TYPE_MASK ) { |
| case PCI_HEADER_TYPE_NORMAL: |
| case PCI_HEADER_TYPE_BRIDGE: |
| default: |
| pci_read_config_byte ( pci, PCI_CAPABILITY_LIST, &pos ); |
| break; |
| case PCI_HEADER_TYPE_CARDBUS: |
| pci_read_config_byte ( pci, PCI_CB_CAPABILITY_LIST, &pos ); |
| break; |
| } |
| return pci_find_capability_common ( pci, pos, cap ); |
| } |
| |
| /** |
| * Look for another PCI capability |
| * |
| * @v pci PCI device to query |
| * @v pos Address of the current capability |
| * @v cap Capability code |
| * @ret address Address of capability, or 0 if not found |
| * |
| * Determine whether or not a device supports a given PCI capability |
| * starting the search at a given address within the device's PCI |
| * configuration space. Returns the address of the next capability |
| * structure within the device's PCI configuration space, or 0 if the |
| * device does not support another such capability. |
| */ |
| int pci_find_next_capability ( struct pci_device *pci, int pos, int cap ) { |
| uint8_t new_pos; |
| |
| pci_read_config_byte ( pci, pos + PCI_CAP_NEXT, &new_pos ); |
| return pci_find_capability_common ( pci, new_pos, cap ); |
| } |
| |
| /** |
| * Find the size of a PCI BAR |
| * |
| * @v pci PCI device |
| * @v reg PCI register number |
| * @ret size BAR size |
| * |
| * It should not be necessary for any Etherboot code to call this |
| * function. |
| */ |
| unsigned long pci_bar_size ( struct pci_device *pci, unsigned int reg ) { |
| uint16_t cmd; |
| uint32_t start, size; |
| |
| /* Save the original command register */ |
| pci_read_config_word ( pci, PCI_COMMAND, &cmd ); |
| /* Save the original bar */ |
| pci_read_config_dword ( pci, reg, &start ); |
| /* Compute which bits can be set */ |
| pci_write_config_dword ( pci, reg, ~0 ); |
| pci_read_config_dword ( pci, reg, &size ); |
| /* Restore the original size */ |
| pci_write_config_dword ( pci, reg, start ); |
| /* Find the significant bits */ |
| /* Restore the original command register. This reenables decoding. */ |
| pci_write_config_word ( pci, PCI_COMMAND, cmd ); |
| if ( start & PCI_BASE_ADDRESS_SPACE_IO ) { |
| size &= ~PCI_BASE_ADDRESS_IO_MASK; |
| } else { |
| size &= ~PCI_BASE_ADDRESS_MEM_MASK; |
| } |
| /* Find the lowest bit set */ |
| size = size & ~( size - 1 ); |
| return size; |
| } |