/** @file
  Main Header file for the MMC DXE driver

  Copyright (c) 2011-2015, ARM Limited. All rights reserved.

  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef __MMC_H
#define __MMC_H

#include <Uefi.h>

#include <Protocol/DiskIo.h>
#include <Protocol/BlockIo.h>
#include <Protocol/DevicePath.h>
#include <Protocol/MmcHost.h>

#include <Library/UefiLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>

#define MMC_TRACE(txt)  DEBUG((EFI_D_BLKIO, "MMC: " txt "\n"))

#define MMC_IOBLOCKS_READ       0
#define MMC_IOBLOCKS_WRITE      1

#define MMC_OCR_POWERUP             0x80000000

#define MMC_OCR_ACCESS_MASK         0x3     /* bit[30-29] */
#define MMC_OCR_ACCESS_BYTE         0x1     /* bit[29] */
#define MMC_OCR_ACCESS_SECTOR       0x2     /* bit[30] */

#define MMC_CSD_GET_CCC(Response)    (Response[2] >> 20)
#define MMC_CSD_GET_TRANSPEED(Response)    (Response[3] & 0xFF)
#define MMC_CSD_GET_READBLLEN(Response)    ((Response[2] >> 16) & 0xF)
#define MMC_CSD_GET_WRITEBLLEN(Response)  ((Response[0] >> 22) & 0xF)
#define MMC_CSD_GET_FILEFORMAT(Response)  ((Response[0] >> 10) & 0x3)
#define MMC_CSD_GET_FILEFORMATGRP(Response)  ((Response[0] >> 15) & 0x1)
#define MMC_CSD_GET_DEVICESIZE(csd)         (((Response[1] >> 30) & 0x3) | ((Response[2] & 0x3FF) << 2))
#define HC_MMC_CSD_GET_DEVICESIZE(Response)    ((Response[1] >> 16) | ((Response[2] & 0x40) << 16));
#define MMC_CSD_GET_DEVICESIZEMULT(csd)     ((Response[1] >> 15) & 0x7)

#define MMC_R0_READY_FOR_DATA               (1 << 8)

#define MMC_R0_CURRENTSTATE(Response)       ((Response[0] >> 9) & 0xF)

#define MMC_R0_STATE_IDLE       0
#define MMC_R0_STATE_READY      1
#define MMC_R0_STATE_IDENT      2
#define MMC_R0_STATE_STDBY      3
#define MMC_R0_STATE_TRAN       4
#define MMC_R0_STATE_DATA       5

#define EMMC_CMD6_ARG_ACCESS(x)             (((x) & 0x3) << 24)
#define EMMC_CMD6_ARG_INDEX(x)              (((x) & 0xFF) << 16)
#define EMMC_CMD6_ARG_VALUE(x)              (((x) & 0xFF) << 8)
#define EMMC_CMD6_ARG_CMD_SET(x)            (((x) & 0x7) << 0)

#define SWITCH_CMD_DATA_LENGTH              64
#define SD_HIGH_SPEED_SUPPORTED             0x20000
#define SD_DEFAULT_SPEED                    25000000
#define SD_HIGH_SPEED                       50000000
#define SWITCH_CMD_SUCCESS_MASK             0x0f000000

#define SD_CARD_CAPACITY                    0x00000002

#define BUSWIDTH_4                          4

typedef enum {
  UNKNOWN_CARD,
  MMC_CARD,              //MMC card
  MMC_CARD_HIGH,         //MMC Card with High capacity
  EMMC_CARD,             //eMMC 4.41 card
  SD_CARD,               //SD 1.1 card
  SD_CARD_2,             //SD 2.0 or above standard card
  SD_CARD_2_HIGH         //SD 2.0 or above high capacity card
} CARD_TYPE;

typedef struct {
  UINT32  Reserved0:   7; // 0
  UINT32  V170_V195:   1; // 1.70V - 1.95V
  UINT32  V200_V260:   7; // 2.00V - 2.60V
  UINT32  V270_V360:   9; // 2.70V - 3.60V
  UINT32  RESERVED_1:  5; // Reserved
  UINT32  AccessMode:  2; // 00b (byte mode), 10b (sector mode)
  UINT32  PowerUp:     1; // This bit is set to LOW if the card has not finished the power up routine
} OCR;

typedef struct {
  UINT8   SD_SPEC:               4; // SD Memory Card - Spec. Version [59:56]
  UINT8   SCR_STRUCTURE:         4; // SCR Structure [63:60]
  UINT8   SD_BUS_WIDTHS:         4; // DAT Bus widths supported [51:48]
  UINT8   DATA_STAT_AFTER_ERASE: 1; // Data Status after erases [55]
  UINT8   SD_SECURITY:           3; // CPRM Security Support [54:52]
  UINT8   EX_SECURITY_1:         1; // Extended Security Support [43]
  UINT8   SD_SPEC4:              1; // Spec. Version 4.00 or higher [42]
  UINT8   RESERVED_1:            2; // Reserved [41:40]
  UINT8   SD_SPEC3:              1; // Spec. Version 3.00 or higher [47]
  UINT8   EX_SECURITY_2:         3; // Extended Security Support [46:44]
  UINT8   CMD_SUPPORT:           4; // Command Support bits [35:32]
  UINT8   RESERVED_2:            4; // Reserved [39:36]
  UINT32  RESERVED_3;               // Manufacturer Usage [31:0]
} SCR;

typedef struct {
  UINT32  NOT_USED;   // 1 [0:0]
  UINT32  CRC;        // CRC7 checksum [7:1]
  UINT32  MDT;        // Manufacturing date [19:8]
  UINT32  RESERVED_1; // Reserved [23:20]
  UINT32  PSN;        // Product serial number [55:24]
  UINT8   PRV;        // Product revision [63:56]
  UINT8   PNM[5];     // Product name [64:103]
  UINT16  OID;        // OEM/Application ID [119:104]
  UINT8   MID;        // Manufacturer ID [127:120]
} CID;

typedef struct {
  UINT8   NOT_USED:           1; // Not used, always 1 [0:0]
  UINT8   CRC:                7; // CRC [7:1]

  UINT8   RESERVED_1:         2; // Reserved [9:8]
  UINT8   FILE_FORMAT:        2; // File format [11:10]
  UINT8   TMP_WRITE_PROTECT:  1; // Temporary write protection [12:12]
  UINT8   PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
  UINT8   COPY:               1; // Copy flag (OTP) [14:14]
  UINT8   FILE_FORMAT_GRP:    1; // File format group [15:15]

  UINT16  RESERVED_2:         5; // Reserved [20:16]
  UINT16  WRITE_BL_PARTIAL:   1; // Partial blocks for write allowed [21:21]
  UINT16  WRITE_BL_LEN:       4; // Max. write data block length [25:22]
  UINT16  R2W_FACTOR:         3; // Write speed factor [28:26]
  UINT16  RESERVED_3:         2; // Reserved [30:29]
  UINT16  WP_GRP_ENABLE:      1; // Write protect group enable [31:31]

  UINT32  WP_GRP_SIZE:        7; // Write protect group size [38:32]
  UINT32  SECTOR_SIZE:        7; // Erase sector size [45:39]
  UINT32  ERASE_BLK_EN:       1; // Erase single block enable [46:46]
  UINT32  C_SIZE_MULT:        3; // Device size multiplier [49:47]
  UINT32  VDD_W_CURR_MAX:     3; // Max. write current @ VDD max [52:50]
  UINT32  VDD_W_CURR_MIN:     3; // Max. write current @ VDD min [55:53]
  UINT32  VDD_R_CURR_MAX:     3; // Max. read current @ VDD max [58:56]
  UINT32  VDD_R_CURR_MIN:     3; // Max. read current @ VDD min [61:59]
  UINT32  C_SIZELow2:         2; // Device size [63:62]

  UINT32  C_SIZEHigh10:       10;// Device size [73:64]
  UINT32  RESERVED_4:         2; // Reserved [75:74]
  UINT32  DSR_IMP:            1; // DSR implemented [76:76]
  UINT32  READ_BLK_MISALIGN:  1; // Read block misalignment [77:77]
  UINT32  WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
  UINT32  READ_BL_PARTIAL:    1; // Partial blocks for read allowed [79:79]
  UINT32  READ_BL_LEN:        4; // Max. read data block length [83:80]
  UINT32  CCC:                12;// Card command classes [95:84]

  UINT8   TRAN_SPEED          ;  // Max. bus clock frequency [103:96]
  UINT8   NSAC                ;  // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
  UINT8   TAAC                ;  // Data read access-time 1 [119:112]

  UINT8   RESERVED_5:         2; // Reserved [121:120]
  UINT8   SPEC_VERS:          4; // System specification version [125:122]
  UINT8   CSD_STRUCTURE:      2; // CSD structure [127:126]
} CSD;

typedef struct {
  UINT8   RESERVED_1[16];                     // Reserved [15:0]
  UINT8   SECURE_REMOVAL_TYPE;                // Secure Removal Type [16:16]
  UINT8   PRODUCT_STATE_AWARENESS_ENABLEMENT; // Product state awareness enablement [17:17]
  UINT8   MAX_PRE_LOADING_DATA_SIZE[4];       // MAX pre loading data size [21:18]
  UINT8   PRE_LOADING_DATA_SIZE[4];           // Pre loading data size [25:22]
  UINT8   FFU_STATUS;                         // FFU Status [26:26]
  UINT8   RESERVED_2[2];                      // Reserved [28:27]
  UINT8   MODE_OPERATION_CODES;               // Mode operation codes [29:29]
  UINT8   MODE_CONFIG;                        // Mode config [30:30]
  UINT8   RESERVED_3;                         // Reserved [31:31]
  UINT8   FLUSH_CACHE;                        // Flushing of the cache [32:32]
  UINT8   CACHE_CTRL;                         // Control to turn the cache ON/OFF [33:33]
  UINT8   POWER_OFF_NOTIFICATION;             // Power Off Notification [34:34]
  UINT8   PACKED_FAILURE_INDEX;               // Packed command failure index [35:35]
  UINT8   PACKED_COMMAND_STATUS;              // Packed command status [36:36]
  UINT8   CONTEXT_CONF[15];                   // Context configuration [51:37]
  UINT8   EXT_PARTITIONS_ATTRIBUTE[2];        // Extended partitions attribute [53:52]
  UINT8   EXCEPTION_EVENTS_STATUS[2];         // Exception events status [55:54]
  UINT8   EXCEPTION_EVENTS_CTRL[2];           // Exception events control [57:56]
  UINT8   DYNCAP_NEEDED;                      // Number of addressed group to be released [58:58]
  UINT8   CLASS_6_CTRL;                       // Class 6 commands control [59:59]
  UINT8   INI_TIMEOUT_EMU;                    // 1st initialization after disabling sector size emulation [60:60]
  UINT8   DATA_SECTOR_SIZE;                   // Sector size [61:61]
  UINT8   USE_NATIVE_SECTOR;                  // Sector size emulation [62:62]
  UINT8   NATIVE_SECTOR_SIZE;                 // Native sector size [63:63]
  UINT8   VENDOR_SPECIFIC_FIELD[64];          // Vendor specific fields [127:64]
  UINT8   RESERVED_4[2];                      // Reserved [129:128]
  UINT8   PROGRAM_CID_CSD_DDR_SUPPORT;        // Program CID/CSD in DDR mode support [130:130]
  UINT8   PERIODIC_WAKEUP;                    // Periodic wake-up [131:131]
  UINT8   TCASE_SUPPORT;                      // Package case temperature is controlled [132:132]
  UINT8   PRODUCTION_STATE_AWARENESS;         // Production state awareness [133:133]
  UINT8   SECTOR_BAD_BLK_MGMNT;               // Bad block management mode [134:134]
  UINT8   RESERVED_5;                         // Reserved [135:135]
  UINT8   ENH_START_ADDR[4];                  // Enhanced user data start address [139:136]
  UINT8   ENH_SIZE_MULT[3];                   // Enhanced user data area size [142:140]
  UINT8   GP_SIZE_MULT[12];                   // General purpose partition size [154:143]
  UINT8   PARTITION_SETTING_COMPLETED;        // Partitioning setting [155:155]
  UINT8   PARTITIONS_ATTRIBUTE;               // Partitions attribute [156:156]
  UINT8   MAX_ENH_SIZE_MULT[3];               // Max enhanced area size [159:157]
  UINT8   PARTITIONING_SUPPORT;               // Partitioning [160:160]
  UINT8   HPI_MGMT;                           // HPI management [161:161]
  UINT8   RST_N_FUNCTION;                     // H/W reset function [162:162]
  UINT8   BKOPS_EN;                           // Enable background operations handshake [163:163]
  UINT8   BKOPS_START;                        // Manually start background operations [164:164]
  UINT8   SANITIZE_START;                     // Start sanitize operation [165:165]
  UINT8   WR_REL_PARAM;                       // Write reliability parameter register [166:166]
  UINT8   WR_REL_SET;                         // Write reliability setting register [167:167]
  UINT8   RPMB_SIZE_MULT;                     // RPMB size [168:168]
  UINT8   FW_CONFIG;                          // FW configuration [169:169]
  UINT8   RESERVED_6;                         // Reserved [170:170]
  UINT8   USER_WP;                            // User area write protection register [171:171]
  UINT8   RESERVED_7;                         // Reserved [172:172]
  UINT8   BOOT_WP;                            // Boot area write protection register [173:173]
  UINT8   BOOT_WP_STATUS;                     // Boot write protection register [174:174]
  UINT8   ERASE_GROUP_DEF;                    // High-density erase group definition [175:175]
  UINT8   RESERVED_8;                         // Reserved [176:176]
  UINT8   BOOT_BUS_CONDITIONS;                // Boot bus conditions [177:177]
  UINT8   BOOT_CONFIG_PROT;                   // Boot config protection [178:178]
  UINT8   PARTITION_CONFIG;                   // Partition config [179:179]
  UINT8   RESERVED_9;                         // Reserved [180:180]
  UINT8   ERASED_MEM_CONT;                    // Erased memory content [181:181]
  UINT8   RESERVED_10;                        // Reserved [182:182]
  UINT8   BUS_WIDTH;                          // Bus width mode [183:183]
  UINT8   RESERVED_11;                        // Reserved [184:184]
  UINT8   HS_TIMING;                          // High-speed interface timing [185:185]
  UINT8   RESERVED_12;                        // Reserved [186:186]
  UINT8   POWER_CLASS;                        // Power class [187:187]
  UINT8   RESERVED_13;                        // Reserved [188:188]
  UINT8   CMD_SET_REV;                        // Command set revision [189:189]
  UINT8   RESERVED_14;                        // Reserved [190:190]
  UINT8   CMD_SET;                            // Command set [191:191]
  UINT8   EXT_CSD_REV;                        // Extended CSD revision [192:192]
  UINT8   RESERVED_15;                        // Reserved [193:193]
  UINT8   CSD_STRUCTURE;                      // CSD Structure [194:194]
  UINT8   RESERVED_16;                        // Reserved [195:195]
  UINT8   DEVICE_TYPE;                        // Device type [196:196]
  UINT8   DRIVER_STRENGTH;                    // I/O Driver strength [197:197]
  UINT8   OUT_OF_INTERRUPT_TIME;              // Out-of-interrupt busy timing [198:198]
  UINT8   PARTITION_SWITCH_TIME;              // Partition switching timing [199:199]
  UINT8   PWR_CL_52_195;                      // Power class for 52MHz at 1.95V 1 R [200:200]
  UINT8   PWR_CL_26_195;                      // Power class for 26MHz at 1.95V 1 R [201:201]
  UINT8   PWR_CL_52_360;                      // Power class for 52MHz at 3.6V 1 R [202:202]
  UINT8   PWR_CL_26_360;                      // Power class for 26MHz at 3.6V 1 R [203:203]
  UINT8   RESERVED_17;                        // Reserved [204:204]
  UINT8   MIN_PERF_R_4_26;                    // Minimum read performance for 4bit at 26MHz [205:205]
  UINT8   MIN_PERF_W_4_26;                    // Minimum write performance for 4bit at 26MHz [206:206]
  UINT8   MIN_PERF_R_8_26_4_52;               // Minimum read performance for 8bit at 26MHz, for 4bit at 52MHz [207:207]
  UINT8   MIN_PERF_W_8_26_4_52;               // Minimum write performance for 8bit at 26MHz, for 4bit at 52MHz [208:208]
  UINT8   MIN_PERF_R_8_52;                    // Minimum read performance for 8bit at 52MHz [209:209]
  UINT8   MIN_PERF_W_8_52;                    // Minimum write performance for 8bit at 52MHz [210:210]
  UINT8   RESERVED_18;                        // Reserved [211:211]
  UINT32  SECTOR_COUNT;                       // Sector count [215:212]
  UINT8   SLEEP_NOTIFICATION_TIME;            // Sleep notification timeout [216:216]
  UINT8   S_A_TIMEOUT;                        // Sleep/awake timeout [217:217]
  UINT8   PRODUCTION_STATE_AWARENESS_TIMEOUT; // Production state awareness timeout [218:218]
  UINT8   S_C_VCCQ;                           // Sleep current (VCCQ) [219:219]
  UINT8   S_C_VCC;                            // Sleep current (VCC) [220:220]
  UINT8   HC_WP_GRP_SIZE;                     // High-capacity write protect group size [221:221]
  UINT8   REL_WR_SECTOR_C;                    // Reliable write sector count [222:222]
  UINT8   ERASE_TIMEOUT_MULT;                 // High-capacity erase timeout [223:223]
  UINT8   HC_ERASE_GRP_SIZE;                  // High-capacity erase unit size [224:224]
  UINT8   ACC_SIZE;                           // Access size [225:225]
  UINT8   BOOT_SIZE_MULTI;                    // Boot partition size [226:226]
  UINT8   RESERVED_19;                        // Reserved [227:227]
  UINT8   BOOT_INFO;                          // Boot information [228:228]
  UINT8   SECURE_TRIM_MULT;                   // Secure TRIM Multiplier [229:229]
  UINT8   SECURE_ERASE_MULT;                  // Secure Erase Multiplier [230:230]
  UINT8   SECURE_FEATURE_SUPPORT;             // Secure Feature Support [231:231]
  UINT8   TRIM_MULT;                          // TRIM Multiplier [232:232]
  UINT8   RESERVED_20;                        // Reserved [233:233]
  UINT8   MIN_PREF_DDR_R_8_52;                // Minimum read performance for 8bit at 52MHz in DDR mode [234:234]
  UINT8   MIN_PREF_DDR_W_8_52;                // Minimum write performance for 8bit at 52MHz in DDR mode [235:235]
  UINT8   PWR_CL_200_130;                     // Power class for 200MHz at VCCQ=1.3V, VCC=3.6V [236:236]
  UINT8   PWR_CL_200_195;                     // Power class for 200MHz at VCCQ=1.95V, VCC=3.6V [237:237]
  UINT8   PWR_CL_DDR_52_195;                  // Power class for 52MHz, DDR at 1.95V [238:238]
  UINT8   PWR_CL_DDR_52_360;                  // Power class for 52Mhz, DDR at 3.6V [239:239]
  UINT8   RESERVED_21;                        // Reserved [240:240]
  UINT8   INI_TIMEOUT_AP;                     // 1st initialization time after partitioning [241:241]
  UINT8   CORRECTLY_PRG_SECTORS_NUM[4];       // Number of correctly programmed sectors [245:242]
  UINT8   BKOPS_STATUS;                       // Background operations status [246:246]
  UINT8   POWER_OFF_LONG_TIME;                // Power off notification (long) timeout [247:247]
  UINT8   GENERIC_CMD6_TIME;                  // Generic CMD6 timeout [248:248]
  UINT8   CACHE_SIZE[4];                      // Cache size [252:249]
  UINT8   PWR_CL_DDR_200_360;                 // Power class for 200MHz, DDR at VCC=3.6V [253:253]
  UINT8   FIRMWARE_VERSION[8];                // Firmware version [261:254]
  UINT8   DEVICE_VERSION[2];                  // Device version [263:262]
  UINT8   OPTIMAL_TRIM_UNIT_SIZE;             // Optimal trim unit size [264:264]
  UINT8   OPTIMAL_WRITE_SIZE;                 // Optimal write size [265:265]
  UINT8   OPTIMAL_READ_SIZE;                  // Optimal read size [266:266]
  UINT8   PRE_EOL_INFO;                       // Pre EOL information [267:267]
  UINT8   DEVICE_LIFE_TIME_EST_TYP_A;         // Device life time estimation type A [268:268]
  UINT8   DEVICE_LIFE_TIME_EST_TYP_B;         // Device life time estimation type B [269:269]
  UINT8   VENDOR_PROPRIETARY_HEALTH_REPORT[32];         // Vendor proprietary health report [301:270]
  UINT8   NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED[4]; // Number of FW sectors correctly programmed [305:302]
  UINT8   RESERVED_22[181];                   // Reserved [486:306]
  UINT8   FFU_ARG[4];                         // FFU argument [490:487]
  UINT8   OPERATION_CODE_TIMEOUT;             // Operation codes timeout [491:491]
  UINT8   FFU_FEATURES;                       // FFU features [492:492]
  UINT8   SUPPORTED_MODES;                    // Supported modes [493:493]
  UINT8   EXT_SUPPORT;                        // Extended partitions attribute support [494:494]
  UINT8   LARGE_UNIT_SIZE_M1;                 // Large unit size [495:495]
  UINT8   CONTEXT_CAPABILITIES;               // Context management capabilities [496:496]
  UINT8   TAG_RES_SIZE;                       // Tag resource size [497:497]
  UINT8   TAG_UNIT_SIZE;                      // Tag unit size [498:498]
  UINT8   DATA_TAG_SUPPORT;                   // Data tag support [499:499]
  UINT8   MAX_PACKED_WRITES;                  // Max packed write commands [500:500]
  UINT8   MAX_PACKED_READS;                   // Max packed read commands [501:501]
  UINT8   BKOPS_SUPPORT;                      // Background operations support [502:502]
  UINT8   HPI_FEATURES;                       // HPI features [503:503]
  UINT8   S_CMD_SET;                          // Supported command sets [504:504]
  UINT8   EXT_SECURITY_ERR;                   // Extended security commands error [505:505]
  UINT8   RESERVED_23[6];                     // Reserved [511:506]
} ECSD;

typedef struct  {
  UINT16    RCA;
  CARD_TYPE CardType;
  OCR       OCRData;
  CID       CIDData;
  CSD       CSDData;
  ECSD      *ECSDData;                         // MMC V4 extended card specific
} CARD_INFO;

typedef struct _MMC_HOST_INSTANCE {
  UINTN                     Signature;
  LIST_ENTRY                Link;
  EFI_HANDLE                MmcHandle;
  EFI_DEVICE_PATH_PROTOCOL  *DevicePath;

  MMC_STATE                 State;
  EFI_BLOCK_IO_PROTOCOL     BlockIo;
  CARD_INFO                 CardInfo;
  EFI_MMC_HOST_PROTOCOL     *MmcHost;

  BOOLEAN                   Initialized;
} MMC_HOST_INSTANCE;

#define MMC_HOST_INSTANCE_SIGNATURE                 SIGNATURE_32('m', 'm', 'c', 'h')
#define MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(a)     CR (a, MMC_HOST_INSTANCE, BlockIo, MMC_HOST_INSTANCE_SIGNATURE)
#define MMC_HOST_INSTANCE_FROM_LINK(a)              CR (a, MMC_HOST_INSTANCE, Link, MMC_HOST_INSTANCE_SIGNATURE)


EFI_STATUS
EFIAPI
MmcGetDriverName (
  IN  EFI_COMPONENT_NAME_PROTOCOL  *This,
  IN  CHAR8                        *Language,
  OUT CHAR16                       **DriverName
  );

EFI_STATUS
EFIAPI
MmcGetControllerName (
  IN  EFI_COMPONENT_NAME_PROTOCOL                     *This,
  IN  EFI_HANDLE                                      ControllerHandle,
  IN  EFI_HANDLE                                      ChildHandle        OPTIONAL,
  IN  CHAR8                                           *Language,
  OUT CHAR16                                          **ControllerName
  );

extern EFI_COMPONENT_NAME_PROTOCOL  gMmcComponentName;
extern EFI_COMPONENT_NAME2_PROTOCOL gMmcComponentName2;

extern EFI_DRIVER_DIAGNOSTICS2_PROTOCOL gMmcDriverDiagnostics2;

extern LIST_ENTRY mMmcHostPool;

/**
  Reset the block device.

  This function implements EFI_BLOCK_IO_PROTOCOL.Reset().
  It resets the block device hardware.
  ExtendedVerification is ignored in this implementation.

  @param  This                   Indicates a pointer to the calling context.
  @param  ExtendedVerification   Indicates that the driver may perform a more exhaustive
                                 verification operation of the device during reset.

  @retval EFI_SUCCESS            The block device was reset.
  @retval EFI_DEVICE_ERROR       The block device is not functioning correctly and could not be reset.

**/
EFI_STATUS
EFIAPI
MmcReset (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN BOOLEAN                  ExtendedVerification
  );

/**
  Reads the requested number of blocks from the device.

  This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks().
  It reads the requested number of blocks from the device.
  All the blocks are read, or an error is returned.

  @param  This                   Indicates a pointer to the calling context.
  @param  MediaId                The media ID that the read request is for.
  @param  Lba                    The starting logical block address to read from on the device.
  @param  BufferSize             The size of the Buffer in bytes.
                                 This must be a multiple of the intrinsic block size of the device.
  @param  Buffer                 A pointer to the destination buffer for the data. The caller is
                                 responsible for either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS            The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to perform the read operation.
  @retval EFI_NO_MEDIA           There is no media in the device.
  @retval EFI_MEDIA_CHANGED      The MediaId is not for the current media.
  @retval EFI_BAD_BUFFER_SIZE    The BufferSize parameter is not a multiple of the intrinsic block size of the device.
  @retval EFI_INVALID_PARAMETER  The read request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
MmcReadBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  OUT VOID                    *Buffer
  );

/**
  Writes a specified number of blocks to the device.

  This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks().
  It writes a specified number of blocks to the device.
  All blocks are written, or an error is returned.

  @param  This                   Indicates a pointer to the calling context.
  @param  MediaId                The media ID that the write request is for.
  @param  Lba                    The starting logical block address to be written.
  @param  BufferSize             The size of the Buffer in bytes.
                                 This must be a multiple of the intrinsic block size of the device.
  @param  Buffer                 Pointer to the source buffer for the data.

  @retval EFI_SUCCESS            The data were written correctly to the device.
  @retval EFI_WRITE_PROTECTED    The device cannot be written to.
  @retval EFI_NO_MEDIA           There is no media in the device.
  @retval EFI_MEDIA_CHANGED      The MediaId is not for the current media.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to perform the write operation.
  @retval EFI_BAD_BUFFER_SIZE    The BufferSize parameter is not a multiple of the intrinsic
                                 block size of the device.
  @retval EFI_INVALID_PARAMETER  The write request contains LBAs that are not valid,
                                 or the buffer is not on proper alignment.

**/
EFI_STATUS
EFIAPI
MmcWriteBlocks (
  IN EFI_BLOCK_IO_PROTOCOL    *This,
  IN UINT32                   MediaId,
  IN EFI_LBA                  Lba,
  IN UINTN                    BufferSize,
  IN VOID                     *Buffer
  );

/**
  Flushes all modified data to a physical block device.

  @param  This                   Indicates a pointer to the calling context.

  @retval EFI_SUCCESS            All outstanding data were written correctly to the device.
  @retval EFI_DEVICE_ERROR       The device reported an error while attempting to write data.
  @retval EFI_NO_MEDIA           There is no media in the device.

**/
EFI_STATUS
EFIAPI
MmcFlushBlocks (
  IN EFI_BLOCK_IO_PROTOCOL  *This
  );

EFI_STATUS
MmcNotifyState (
  IN MMC_HOST_INSTANCE      *MmcHostInstance,
  IN MMC_STATE               State
  );

EFI_STATUS
InitializeMmcDevice (
  IN  MMC_HOST_INSTANCE     *MmcHost
  );

VOID
EFIAPI
CheckCardsCallback (
  IN  EFI_EVENT   Event,
  IN  VOID        *Context
  );

VOID
PrintCSD (
  IN UINT32* Csd
  );

VOID
PrintRCA (
  IN UINT32 Rca
  );

VOID
PrintOCR (
  IN UINT32 Ocr
  );

VOID
PrintResponseR1 (
  IN  UINT32 Response
  );

VOID
PrintCID (
  IN UINT32* Cid
  );

#endif