/** @file
  FrameBufferBltLib - Library to perform blt operations on a frame buffer.

  Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include <Uefi/UefiBaseType.h>
#include <Protocol/GraphicsOutput.h>

#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/FrameBufferBltLib.h>

struct FRAME_BUFFER_CONFIGURE {
  UINT32                          PixelsPerScanLine;
  UINT32                          BytesPerPixel;
  UINT32                          Width;
  UINT32                          Height;
  UINT8                           *FrameBuffer;
  EFI_GRAPHICS_PIXEL_FORMAT       PixelFormat;
  EFI_PIXEL_BITMASK               PixelMasks;
  INT8                            PixelShl[4]; // R-G-B-Rsvd
  INT8                            PixelShr[4]; // R-G-B-Rsvd
  UINT8                           LineBuffer[0];
};

CONST EFI_PIXEL_BITMASK mRgbPixelMasks = {
  0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000
};

CONST EFI_PIXEL_BITMASK mBgrPixelMasks = {
  0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
};

/**
  Initialize the bit mask in frame buffer configure.

  @param BitMask       The bit mask of pixel.
  @param BytesPerPixel Size in bytes of pixel.
  @param PixelShl      Left shift array.
  @param PixelShr      Right shift array.
**/
VOID
FrameBufferBltLibConfigurePixelFormat (
  IN CONST EFI_PIXEL_BITMASK    *BitMask,
  OUT UINT32                    *BytesPerPixel,
  OUT INT8                      *PixelShl,
  OUT INT8                      *PixelShr
  )
{
  UINT8   Index;
  UINT32  *Masks;
  UINT32  MergedMasks;

  ASSERT (BytesPerPixel != NULL);

  MergedMasks = 0;
  Masks = (UINT32*) BitMask;
  for (Index = 0; Index < 3; Index++) {
    ASSERT ((MergedMasks & Masks[Index]) == 0);

    PixelShl[Index] = (INT8) HighBitSet32 (Masks[Index]) - 23 + (Index * 8);
    if (PixelShl[Index] < 0) {
      PixelShr[Index] = -PixelShl[Index];
      PixelShl[Index] = 0;
    } else {
      PixelShr[Index] = 0;
    }
    DEBUG ((DEBUG_INFO, "%d: shl:%d shr:%d mask:%x\n", Index,
            PixelShl[Index], PixelShr[Index], Masks[Index]));

    MergedMasks = (UINT32) (MergedMasks | Masks[Index]);
  }
  MergedMasks = (UINT32) (MergedMasks | Masks[3]);

  ASSERT (MergedMasks != 0);
  *BytesPerPixel = (UINT32) ((HighBitSet32 (MergedMasks) + 7) / 8);
  DEBUG ((DEBUG_INFO, "Bytes per pixel: %d\n", *BytesPerPixel));
}

/**
  Create the configuration for a video frame buffer.

  The configuration is returned in the caller provided buffer.

  @param[in] FrameBuffer       Pointer to the start of the frame buffer.
  @param[in] FrameBufferInfo   Describes the frame buffer characteristics.
  @param[in,out] Configure     The created configuration information.
  @param[in,out] ConfigureSize Size of the configuration information.

  @retval RETURN_SUCCESS            The configuration was successful created.
  @retval RETURN_BUFFER_TOO_SMALL   The Configure is to too small. The required
                                    size is returned in ConfigureSize.
  @retval RETURN_UNSUPPORTED        The requested mode is not supported by
                                    this implementaion.

**/
RETURN_STATUS
EFIAPI
FrameBufferBltConfigure (
  IN     VOID                                  *FrameBuffer,
  IN     EFI_GRAPHICS_OUTPUT_MODE_INFORMATION  *FrameBufferInfo,
  IN OUT FRAME_BUFFER_CONFIGURE                *Configure,
  IN OUT UINTN                                 *ConfigureSize
  )
{
  CONST EFI_PIXEL_BITMASK                      *BitMask;
  UINT32                                       BytesPerPixel;
  INT8                                         PixelShl[4];
  INT8                                         PixelShr[4];

  if (ConfigureSize == NULL) {
    return RETURN_INVALID_PARAMETER;
  }

  switch (FrameBufferInfo->PixelFormat) {
  case PixelRedGreenBlueReserved8BitPerColor:
    BitMask = &mRgbPixelMasks;
    break;

  case PixelBlueGreenRedReserved8BitPerColor:
    BitMask = &mBgrPixelMasks;
    break;

  case PixelBitMask:
    BitMask = &FrameBufferInfo->PixelInformation;
    break;

  case PixelBltOnly:
    ASSERT (FrameBufferInfo->PixelFormat != PixelBltOnly);
    return RETURN_UNSUPPORTED;

  default:
    ASSERT (FALSE);
    return RETURN_INVALID_PARAMETER;
  }

  if (FrameBufferInfo->PixelsPerScanLine < FrameBufferInfo->HorizontalResolution) {
    return RETURN_UNSUPPORTED;
  }

  FrameBufferBltLibConfigurePixelFormat (BitMask, &BytesPerPixel, PixelShl, PixelShr);

  if (*ConfigureSize < sizeof (FRAME_BUFFER_CONFIGURE)
                     + FrameBufferInfo->HorizontalResolution * BytesPerPixel) {
    *ConfigureSize = sizeof (FRAME_BUFFER_CONFIGURE)
                   + FrameBufferInfo->HorizontalResolution * BytesPerPixel;
    return RETURN_BUFFER_TOO_SMALL;
  }

  if (Configure == NULL) {
    return RETURN_INVALID_PARAMETER;
  }

  CopyMem (&Configure->PixelMasks, BitMask,  sizeof (*BitMask));
  CopyMem (Configure->PixelShl,    PixelShl, sizeof (PixelShl));
  CopyMem (Configure->PixelShr,    PixelShr, sizeof (PixelShr));
  Configure->BytesPerPixel     = BytesPerPixel;
  Configure->PixelFormat       = FrameBufferInfo->PixelFormat;
  Configure->FrameBuffer       = (UINT8*) FrameBuffer;
  Configure->Width             = FrameBufferInfo->HorizontalResolution;
  Configure->Height            = FrameBufferInfo->VerticalResolution;
  Configure->PixelsPerScanLine = FrameBufferInfo->PixelsPerScanLine;

  return RETURN_SUCCESS;
}

/**
  Performs a UEFI Graphics Output Protocol Blt Video Fill.

  @param[in]  Configure     Pointer to a configuration which was successfully
                            created by FrameBufferBltConfigure ().
  @param[in]  Color         Color to fill the region with.
  @param[in]  DestinationX  X location to start fill operation.
  @param[in]  DestinationY  Y location to start fill operation.
  @param[in]  Width         Width (in pixels) to fill.
  @param[in]  Height        Height to fill.

  @retval  RETURN_INVALID_PARAMETER Invalid parameter was passed in.
  @retval  RETURN_SUCCESS           The video was filled successfully.

**/
EFI_STATUS
FrameBufferBltLibVideoFill (
  IN  FRAME_BUFFER_CONFIGURE        *Configure,
  IN  EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Color,
  IN  UINTN                         DestinationX,
  IN  UINTN                         DestinationY,
  IN  UINTN                         Width,
  IN  UINTN                         Height
  )
{
  UINTN                             IndexX;
  UINTN                             IndexY;
  UINT8                             *Destination;
  UINT8                             Uint8;
  UINT32                            Uint32;
  UINT64                            WideFill;
  BOOLEAN                           UseWideFill;
  BOOLEAN                           LineBufferReady;
  UINTN                             Offset;
  UINTN                             WidthInBytes;
  UINTN                             SizeInBytes;

  //
  // BltBuffer to Video: Source is BltBuffer, destination is Video
  //
  if (DestinationY + Height > Configure->Height) {
    DEBUG ((EFI_D_VERBOSE, "VideoFill: Past screen (Y)\n"));
    return RETURN_INVALID_PARAMETER;
  }

  if (DestinationX + Width > Configure->Width) {
    DEBUG ((EFI_D_VERBOSE, "VideoFill: Past screen (X)\n"));
    return RETURN_INVALID_PARAMETER;
  }

  if (Width == 0 || Height == 0) {
    DEBUG ((EFI_D_VERBOSE, "VideoFill: Width or Height is 0\n"));
    return RETURN_INVALID_PARAMETER;
  }

  WidthInBytes = Width * Configure->BytesPerPixel;

  Uint32 = *(UINT32*) Color;
  WideFill =
    (UINT32) (
    (((Uint32 << Configure->PixelShl[0]) >> Configure->PixelShr[0]) &
     Configure->PixelMasks.RedMask) |
     (((Uint32 << Configure->PixelShl[1]) >> Configure->PixelShr[1]) &
      Configure->PixelMasks.GreenMask) |
      (((Uint32 << Configure->PixelShl[2]) >> Configure->PixelShr[2]) &
       Configure->PixelMasks.BlueMask)
      );
  DEBUG ((EFI_D_VERBOSE, "VideoFill: color=0x%x, wide-fill=0x%x\n",
          Uint32, WideFill));

  //
  // If the size of the pixel data evenly divides the sizeof
  // WideFill, then a wide fill operation can be used
  //
  UseWideFill = TRUE;
  if ((sizeof (WideFill) % Configure->BytesPerPixel) == 0) {
    for (IndexX = Configure->BytesPerPixel; IndexX < sizeof (WideFill); IndexX++) {
      ((UINT8*) &WideFill)[IndexX] = ((UINT8*) &WideFill)[IndexX % Configure->BytesPerPixel];
    }
  } else {
    //
    // If all the bytes in the pixel are the same value, then use
    // a wide fill operation.
    //
    for (
      IndexX = 1, Uint8 = ((UINT8*) &WideFill)[0];
      IndexX < Configure->BytesPerPixel;
      IndexX++) {
      if (Uint8 != ((UINT8*) &WideFill)[IndexX]) {
        UseWideFill = FALSE;
        break;
      }
    }
    if (UseWideFill) {
      SetMem (&WideFill, sizeof (WideFill), Uint8);
    }
  }

  if (UseWideFill && (DestinationX == 0) && (Width == Configure->PixelsPerScanLine)) {
    DEBUG ((EFI_D_VERBOSE, "VideoFill (wide, one-shot)\n"));
    Offset = DestinationY * Configure->PixelsPerScanLine;
    Offset = Configure->BytesPerPixel * Offset;
    Destination = Configure->FrameBuffer + Offset;
    SizeInBytes = WidthInBytes * Height;
    if (SizeInBytes >= 8) {
      SetMem32 (Destination, SizeInBytes & ~3, (UINT32) WideFill);
      Destination += SizeInBytes & ~3;
      SizeInBytes &= 3;
    }
    if (SizeInBytes > 0) {
      SetMem (Destination, SizeInBytes, (UINT8) (UINTN) WideFill);
    }
  } else {
    LineBufferReady = FALSE;
    for (IndexY = DestinationY; IndexY < (Height + DestinationY); IndexY++) {
      Offset = (IndexY * Configure->PixelsPerScanLine) + DestinationX;
      Offset = Configure->BytesPerPixel * Offset;
      Destination = Configure->FrameBuffer + Offset;

      if (UseWideFill && (((UINTN) Destination & 7) == 0)) {
        DEBUG ((EFI_D_VERBOSE, "VideoFill (wide)\n"));
        SizeInBytes = WidthInBytes;
        if (SizeInBytes >= 8) {
          SetMem64 (Destination, SizeInBytes & ~7, WideFill);
          Destination += SizeInBytes & ~7;
          SizeInBytes &= 7;
        }
        if (SizeInBytes > 0) {
          CopyMem (Destination, &WideFill, SizeInBytes);
        }
      } else {
        DEBUG ((EFI_D_VERBOSE, "VideoFill (not wide)\n"));
        if (!LineBufferReady) {
          CopyMem (Configure->LineBuffer, &WideFill, Configure->BytesPerPixel);
          for (IndexX = 1; IndexX < Width; ) {
            CopyMem (
              (Configure->LineBuffer + (IndexX * Configure->BytesPerPixel)),
              Configure->LineBuffer,
              MIN (IndexX, Width - IndexX) * Configure->BytesPerPixel
            );
            IndexX += MIN (IndexX, Width - IndexX);
          }
          LineBufferReady = TRUE;
        }
        CopyMem (Destination, Configure->LineBuffer, WidthInBytes);
      }
    }
  }

  return RETURN_SUCCESS;
}

/**
  Performs a UEFI Graphics Output Protocol Blt Video to Buffer operation
  with extended parameters.

  @param[in]  Configure     Pointer to a configuration which was successfully
                            created by FrameBufferBltConfigure ().
  @param[out] BltBuffer     Output buffer for pixel color data.
  @param[in]  SourceX       X location within video.
  @param[in]  SourceY       Y location within video.
  @param[in]  DestinationX  X location within BltBuffer.
  @param[in]  DestinationY  Y location within BltBuffer.
  @param[in]  Width         Width (in pixels).
  @param[in]  Height        Height.
  @param[in]  Delta         Number of bytes in a row of BltBuffer.

  @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in.
  @retval RETURN_SUCCESS           The Blt operation was performed successfully.
**/
RETURN_STATUS
FrameBufferBltLibVideoToBltBuffer (
  IN     FRAME_BUFFER_CONFIGURE          *Configure,
     OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL   *BltBuffer,
  IN     UINTN                           SourceX,
  IN     UINTN                           SourceY,
  IN     UINTN                           DestinationX,
  IN     UINTN                           DestinationY,
  IN     UINTN                           Width,
  IN     UINTN                           Height,
  IN     UINTN                           Delta
  )
{
  UINTN                                  DstY;
  UINTN                                  SrcY;
  EFI_GRAPHICS_OUTPUT_BLT_PIXEL          *Blt;
  UINT8                                  *Source;
  UINT8                                  *Destination;
  UINTN                                  IndexX;
  UINT32                                 Uint32;
  UINTN                                  Offset;
  UINTN                                  WidthInBytes;

  //
  // Video to BltBuffer: Source is Video, destination is BltBuffer
  //
  if (SourceY + Height > Configure->Height) {
    return RETURN_INVALID_PARAMETER;
  }

  if (SourceX + Width > Configure->Width) {
    return RETURN_INVALID_PARAMETER;
  }

  if (Width == 0 || Height == 0) {
    return RETURN_INVALID_PARAMETER;
  }

  //
  // If Delta is zero, then the entire BltBuffer is being used, so Delta is
  // the number of bytes in each row of BltBuffer. Since BltBuffer is Width
  // pixels size, the number of bytes in each row can be computed.
  //
  if (Delta == 0) {
    Delta = Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL);
  }

  WidthInBytes = Width * Configure->BytesPerPixel;

  //
  // Video to BltBuffer: Source is Video, destination is BltBuffer
  //
  for (SrcY = SourceY, DstY = DestinationY;
       DstY < (Height + DestinationY);
       SrcY++, DstY++) {

    Offset = (SrcY * Configure->PixelsPerScanLine) + SourceX;
    Offset = Configure->BytesPerPixel * Offset;
    Source = Configure->FrameBuffer + Offset;

    if (Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor) {
      Destination = (UINT8 *) BltBuffer + (DstY * Delta) + (DestinationX * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
    } else {
      Destination = Configure->LineBuffer;
    }

    CopyMem (Destination, Source, WidthInBytes);

    if (Configure->PixelFormat != PixelBlueGreenRedReserved8BitPerColor) {
      for (IndexX = 0; IndexX < Width; IndexX++) {
        Blt = (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *)
          ((UINT8 *) BltBuffer + (DstY * Delta) +
          (DestinationX + IndexX) * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL));
        Uint32 = *(UINT32*) (Configure->LineBuffer + (IndexX * Configure->BytesPerPixel));
        *(UINT32*) Blt =
          (UINT32) (
          (((Uint32 & Configure->PixelMasks.RedMask) >>
            Configure->PixelShl[0]) << Configure->PixelShr[0]) |
            (((Uint32 & Configure->PixelMasks.GreenMask) >>
              Configure->PixelShl[1]) << Configure->PixelShr[1]) |
              (((Uint32 & Configure->PixelMasks.BlueMask) >>
                Configure->PixelShl[2]) << Configure->PixelShr[2])
            );
      }
    }
  }

  return RETURN_SUCCESS;
}

/**
  Performs a UEFI Graphics Output Protocol Blt Buffer to Video operation
  with extended parameters.

  @param[in]  Configure     Pointer to a configuration which was successfully
                            created by FrameBufferBltConfigure ().
  @param[in]  BltBuffer     Output buffer for pixel color data.
  @param[in]  SourceX       X location within BltBuffer.
  @param[in]  SourceY       Y location within BltBuffer.
  @param[in]  DestinationX  X location within video.
  @param[in]  DestinationY  Y location within video.
  @param[in]  Width         Width (in pixels).
  @param[in]  Height        Height.
  @param[in]  Delta         Number of bytes in a row of BltBuffer.

  @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in.
  @retval RETURN_SUCCESS           The Blt operation was performed successfully.
**/
RETURN_STATUS
FrameBufferBltLibBufferToVideo (
  IN  FRAME_BUFFER_CONFIGURE                *Configure,
  IN  EFI_GRAPHICS_OUTPUT_BLT_PIXEL         *BltBuffer,
  IN  UINTN                                 SourceX,
  IN  UINTN                                 SourceY,
  IN  UINTN                                 DestinationX,
  IN  UINTN                                 DestinationY,
  IN  UINTN                                 Width,
  IN  UINTN                                 Height,
  IN  UINTN                                 Delta
  )
{
  UINTN                                    DstY;
  UINTN                                    SrcY;
  EFI_GRAPHICS_OUTPUT_BLT_PIXEL            *Blt;
  UINT8                                    *Source;
  UINT8                                    *Destination;
  UINTN                                    IndexX;
  UINT32                                   Uint32;
  UINTN                                    Offset;
  UINTN                                    WidthInBytes;

  //
  // BltBuffer to Video: Source is BltBuffer, destination is Video
  //
  if (DestinationY + Height > Configure->Height) {
    return RETURN_INVALID_PARAMETER;
  }

  if (DestinationX + Width > Configure->Width) {
    return RETURN_INVALID_PARAMETER;
  }

  if (Width == 0 || Height == 0) {
    return RETURN_INVALID_PARAMETER;
  }

  //
  // If Delta is zero, then the entire BltBuffer is being used, so Delta is
  // the number of bytes in each row of BltBuffer. Since BltBuffer is Width
  // pixels size, the number of bytes in each row can be computed.
  //
  if (Delta == 0) {
    Delta = Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL);
  }

  WidthInBytes = Width * Configure->BytesPerPixel;

  for (SrcY = SourceY, DstY = DestinationY;
       SrcY < (Height + SourceY);
       SrcY++, DstY++) {

    Offset = (DstY * Configure->PixelsPerScanLine) + DestinationX;
    Offset = Configure->BytesPerPixel * Offset;
    Destination = Configure->FrameBuffer + Offset;

    if (Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor) {
      Source = (UINT8 *) BltBuffer + (SrcY * Delta) + SourceX * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL);
    } else {
      for (IndexX = 0; IndexX < Width; IndexX++) {
        Blt =
          (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) (
              (UINT8 *) BltBuffer +
              (SrcY * Delta) +
              ((SourceX + IndexX) * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL))
            );
        Uint32 = *(UINT32*) Blt;
        *(UINT32*) (Configure->LineBuffer + (IndexX * Configure->BytesPerPixel)) =
          (UINT32) (
              (((Uint32 << Configure->PixelShl[0]) >> Configure->PixelShr[0]) &
               Configure->PixelMasks.RedMask) |
              (((Uint32 << Configure->PixelShl[1]) >> Configure->PixelShr[1]) &
               Configure->PixelMasks.GreenMask) |
              (((Uint32 << Configure->PixelShl[2]) >> Configure->PixelShr[2]) &
               Configure->PixelMasks.BlueMask)
            );
      }
      Source = Configure->LineBuffer;
    }

    CopyMem (Destination, Source, WidthInBytes);
  }

  return RETURN_SUCCESS;
}

/**
  Performs a UEFI Graphics Output Protocol Blt Video to Video operation

  @param[in]  Configure     Pointer to a configuration which was successfully
                            created by FrameBufferBltConfigure ().
  @param[in]  SourceX       X location within video.
  @param[in]  SourceY       Y location within video.
  @param[in]  DestinationX  X location within video.
  @param[in]  DestinationY  Y location within video.
  @param[in]  Width         Width (in pixels).
  @param[in]  Height        Height.

  @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in.
  @retval RETURN_SUCCESS           The Blt operation was performed successfully.
**/
RETURN_STATUS
FrameBufferBltLibVideoToVideo (
  IN  FRAME_BUFFER_CONFIGURE                *Configure,
  IN  UINTN                                 SourceX,
  IN  UINTN                                 SourceY,
  IN  UINTN                                 DestinationX,
  IN  UINTN                                 DestinationY,
  IN  UINTN                                 Width,
  IN  UINTN                                 Height
  )
{
  UINT8                                     *Source;
  UINT8                                     *Destination;
  UINTN                                     Offset;
  UINTN                                     WidthInBytes;
  INTN                                      LineStride;

  //
  // Video to Video: Source is Video, destination is Video
  //
  if (SourceY + Height > Configure->Height) {
    return RETURN_INVALID_PARAMETER;
  }

  if (SourceX + Width > Configure->Width) {
    return RETURN_INVALID_PARAMETER;
  }

  if (DestinationY + Height > Configure->Height) {
    return RETURN_INVALID_PARAMETER;
  }

  if (DestinationX + Width > Configure->Width) {
    return RETURN_INVALID_PARAMETER;
  }

  if (Width == 0 || Height == 0) {
    return RETURN_INVALID_PARAMETER;
  }

  WidthInBytes = Width * Configure->BytesPerPixel;

  Offset = (SourceY * Configure->PixelsPerScanLine) + SourceX;
  Offset = Configure->BytesPerPixel * Offset;
  Source = Configure->FrameBuffer + Offset;

  Offset = (DestinationY * Configure->PixelsPerScanLine) + DestinationX;
  Offset = Configure->BytesPerPixel * Offset;
  Destination = Configure->FrameBuffer + Offset;

  LineStride = Configure->BytesPerPixel * Configure->PixelsPerScanLine;
  if (Destination > Source) {
    //
    // Copy from last line to avoid source is corrupted by copying
    //
    Source += Height * LineStride;
    Destination += Height * LineStride;
    LineStride = -LineStride;
  }

  while (Height-- > 0) {
    CopyMem (Destination, Source, WidthInBytes);

    Source += LineStride;
    Destination += LineStride;
  }

  return RETURN_SUCCESS;
}

/**
  Performs a UEFI Graphics Output Protocol Blt operation.

  @param[in]     Configure    Pointer to a configuration which was successfully
                              created by FrameBufferBltConfigure ().
  @param[in,out] BltBuffer    The data to transfer to screen.
  @param[in]     BltOperation The operation to perform.
  @param[in]     SourceX      The X coordinate of the source for BltOperation.
  @param[in]     SourceY      The Y coordinate of the source for BltOperation.
  @param[in]     DestinationX The X coordinate of the destination for
                              BltOperation.
  @param[in]     DestinationY The Y coordinate of the destination for
                              BltOperation.
  @param[in]     Width        The width of a rectangle in the blt rectangle
                              in pixels.
  @param[in]     Height       The height of a rectangle in the blt rectangle
                              in pixels.
  @param[in]     Delta        Not used for EfiBltVideoFill and
                              EfiBltVideoToVideo operation. If a Delta of 0
                              is used, the entire BltBuffer will be operated
                              on. If a subrectangle of the BltBuffer is
                              used, then Delta represents the number of
                              bytes in a row of the BltBuffer.

  @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in.
  @retval RETURN_SUCCESS           The Blt operation was performed successfully.
**/
RETURN_STATUS
EFIAPI
FrameBufferBlt (
  IN     FRAME_BUFFER_CONFIGURE                *Configure,
  IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL         *BltBuffer, OPTIONAL
  IN     EFI_GRAPHICS_OUTPUT_BLT_OPERATION     BltOperation,
  IN     UINTN                                 SourceX,
  IN     UINTN                                 SourceY,
  IN     UINTN                                 DestinationX,
  IN     UINTN                                 DestinationY,
  IN     UINTN                                 Width,
  IN     UINTN                                 Height,
  IN     UINTN                                 Delta
  )
{
  if (Configure == NULL) {
    return RETURN_INVALID_PARAMETER;
  }

  switch (BltOperation) {
  case EfiBltVideoToBltBuffer:
    return FrameBufferBltLibVideoToBltBuffer (
             Configure,
             BltBuffer,
             SourceX,
             SourceY,
             DestinationX,
             DestinationY,
             Width,
             Height,
             Delta
             );

  case EfiBltVideoToVideo:
    return FrameBufferBltLibVideoToVideo (
             Configure,
             SourceX,
             SourceY,
             DestinationX,
             DestinationY,
             Width,
             Height
             );

  case EfiBltVideoFill:
    return FrameBufferBltLibVideoFill (
             Configure,
             BltBuffer,
             DestinationX,
             DestinationY,
             Width,
             Height
             );

  case EfiBltBufferToVideo:
    return FrameBufferBltLibBufferToVideo (
             Configure,
             BltBuffer,
             SourceX,
             SourceY,
             DestinationX,
             DestinationY,
             Width,
             Height,
             Delta
             );

  default:
    return RETURN_INVALID_PARAMETER;
  }
}