OvmfPkg - Platform CI

This ReadMe.md describes the Azure DevOps based Platform CI for OvmfPkg and how to use the same Pytools based build infrastructure locally.

Supported Configuration Details

This solution for building and running OvmfPkg has only been validated with Windows 10 with VS2019 and Ubuntu 18.04 with GCC5 toolchain. Four different firmware builds are supported and are described below.

Configuration name	Architectures	DSC File	Additional Flags
IA32	IA32	OvmfPkgIa32.dsc	None
X64	X64	OvmfPkgIa64.dsc	None
IA32 X64	PEI-IA32 DXE-X64	OvmfPkgIa32X64.dsc	None
IA32 X64 Full	PEI-IA32 DXE-X64	OvmfPkgIa32X64.dsc	SECURE_BOOT_ENABLE=1 SMM_REQUIRE=1 TPM1_ENABLE=1 TPM2_ENABLE=1 NETWORK_TLS_ENABLE=1 NETWORK_IP6_ENABLE=1 NETWORK_HTTP_BOOT_ENABLE=1

EDK2 Developer environment

Python 3.8.x - Download & Install
GIT - Download & Install
QEMU - Download, Install, and add to your path
Edk2 Source
Additional packages found necessary for Ubuntu 18.04
- apt-get install gcc g++ make uuid-dev

Note: edksetup, Submodule initialization and manual installation of NASM, iASL, or the required cross-compiler toolchains are not required, this is handled by the Pytools build system.

Building with Pytools for OvmfPkg

If you are unfamiliar with Pytools, it is recommended to first read through the generic set of edk2 Build Instructions.

[Optional] Create a Python Virtual Environment - generally once per workspace
```
python -m venv <name of virtual environment>
```

[Optional] Activate Virtual Environment - each time new shell opened

Linux

source <name of virtual environment>/bin/activate

Windows

<name of virtual environment>/Scripts/activate.bat

Install Pytools - generally once per virtual env or whenever pip-requirements.txt changes
```
pip install --upgrade -r pip-requirements.txt
```

Initialize & Update Submodules - only when submodules updated

stuart_setup -c OvmfPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>

Initialize & Update Dependencies - only as needed when ext_deps change

stuart_update -c OvmfPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH>

Compile the basetools if necessary - only when basetools C source files change
```
python BaseTools/Edk2ToolsBuild.py -t <ToolChainTag>
```

Compile Firmware

To build IA32

stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py -a IA32 TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG>

To build X64

stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py -a X64 TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG>

To build IA32 X64

stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py -a IA32,X64 TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG>

use stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py -h option to see additional options like --clean

Running Emulator
- You can add --FlashRom to the end of your build command and the emulator will run after the build is complete.
- or use the --FlashOnly feature to just run the emulator.
```
stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py TOOL_CHAIN_TAG=<TOOL_CHAIN_TAG> -a <TARGET_ARCH> --FlashOnly
```

Notes

Configuring ACTIVE_PLATFORM and TARGET_ARCH in Conf/target.txt is not required. This environment is set by PlatformBuild.py based upon the [-a <TARGET_ARCH>] parameter.
QEMU must be on your path. On Windows this is a manual process and not part of the QEMU installer.

NOTE: Logging the execution output will be in the normal stuart log as well as to your console.

Custom Build Options

MAKE_STARTUP_NSH=TRUE will output a startup.nsh file to the location mapped as fs0. This is used in CI in combination with the --FlashOnly feature to run QEMU to the UEFI shell and then execute the contents of startup.nsh.

QEMU_HEADLESS=TRUE Since CI servers run headless QEMU must be told to run with no display otherwise an error occurs. Locally you don't need to set this.

Passing Build Defines

To pass build defines through stuart_build, prepend BLD_*_to the define name and pass it on the command-line. stuart_build currently requires values to be assigned, so add an=1 suffix for bare defines. For example, to enable the TPM2 support, instead of the traditional “-D E1000_ENABLE”, the stuart_build command-line would be:

stuart_build -c OvmfPkg/PlatformCI/PlatformBuild.py BLD_*_E1000_ENABLE=1