#/** @file
# ARM processor package.
#
# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>
# Copyright (c) 2011 - 2022, ARM Limited. All rights reserved.
# Copyright (c) 2021, Ampere Computing LLC. All rights reserved.
#
#    SPDX-License-Identifier: BSD-2-Clause-Patent
#
#**/

[Defines]
  DEC_SPECIFICATION              = 0x00010005
  PACKAGE_NAME                   = ArmPkg
  PACKAGE_GUID                   = 5CFBD99E-3C43-4E7F-8054-9CDEAFF7710F
  PACKAGE_VERSION                = 0.1

################################################################################
#
# Include Section - list of Include Paths that are provided by this package.
#                   Comments are used for Keywords and Module Types.
#
# Supported Module Types:
#  BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
#
################################################################################
[Includes.common]
  Include                        # Root include for the package

[LibraryClasses.common]
  ##  @libraryclass  Convert Arm instructions to a human readable format.
  #
  ArmDisassemblerLib|Include/Library/ArmDisassemblerLib.h

  ##  @libraryclass  Provides an interface to Arm generic counters.
  #
  ArmGenericTimerCounterLib|Include/Library/ArmGenericTimerCounterLib.h

  ##  @libraryclass  Provides an interface to initialize a
  #   Generic Interrupt Controller (GIC).
  #
  ArmGicArchLib|Include/Library/ArmGicArchLib.h

  ##  @libraryclass  Provides a Generic Interrupt Controller (GIC)
  #   configuration interface.
  #
  ArmGicLib|Include/Library/ArmGicLib.h

  ##  @libraryclass  Provides a HyperVisor Call (HVC) interface.
  #
  ArmHvcLib|Include/Library/ArmHvcLib.h

  ##  @libraryclass  Provides an interface to Arm registers.
  #
  ArmLib|Include/Library/ArmLib.h

  ##  @libraryclass  Provides a Mmu interface.
  #
  ArmMmuLib|Include/Library/ArmMmuLib.h

  ##  @libraryclass  Provides a Mailbox Transport Layer (MTL) interface
  #   for the System Control and Management Interface (SCMI).
  #
  ArmMtlLib|Include/Library/ArmMtlLib.h

  ##  @libraryclass  Provides a System Monitor Call (SMC) interface.
  #
  ArmSmcLib|Include/Library/ArmSmcLib.h

  ##  @libraryclass  Provides a SuperVisor Call (SVC) interface.
  #
  ArmSvcLib|Include/Library/ArmSvcLib.h

  ##  @libraryclass  Provides a Monitor Call interface that will use the
  #   default conduit (HVC or SMC).
  #
  ArmMonitorLib|Include/Library/ArmMonitorLib.h

  ##  @libraryclass  Provides a default exception handler.
  #
  DefaultExceptionHandlerLib|Include/Library/DefaultExceptionHandlerLib.h

  ##  @libraryclass  Provides an interface to query miscellaneous OEM
  #   information.
  #
  OemMiscLib|Include/Library/OemMiscLib.h

  ##  @libraryclass  Provides an OpTee interface.
  #
  OpteeLib|Include/Library/OpteeLib.h

  ##  @libraryclass  Provides a semihosting interface.
  #
  SemihostLib|Include/Library/SemihostLib.h

  ##  @libraryclass  Provides an interface for a StandaloneMm Mmu.
  #
  StandaloneMmMmuLib|Include/Library/StandaloneMmMmuLib.h

[Guids.common]
  gArmTokenSpaceGuid       = { 0xBB11ECFE, 0x820F, 0x4968, { 0xBB, 0xA6, 0xF7, 0x6A, 0xFE, 0x30, 0x25, 0x96 } }

  ## ARM MPCore table
  # Include/Guid/ArmMpCoreInfo.h
  gArmMpCoreInfoGuid = { 0xa4ee0728, 0xe5d7, 0x4ac5,  {0xb2, 0x1e, 0x65, 0x8e, 0xd8, 0x57, 0xe8, 0x34} }

  gArmMmuReplaceLiveTranslationEntryFuncGuid = { 0xa8b50ff3, 0x08ec, 0x4dd3, {0xbf, 0x04, 0x28, 0xbf, 0x71, 0x75, 0xc7, 0x4a} }

[Protocols.common]
  ## Arm System Control and Management Interface(SCMI) Base protocol
  ## ArmPkg/Include/Protocol/ArmScmiBaseProtocol.h
  gArmScmiBaseProtocolGuid = { 0xd7e5abe9, 0x33ab, 0x418e, { 0x9f, 0x91, 0x72, 0xda, 0xe2, 0xba, 0x8e, 0x2f } }

  ## Arm System Control and Management Interface(SCMI) Clock management protocol
  ## ArmPkg/Include/Protocol/ArmScmiClockProtocol.h
  gArmScmiClockProtocolGuid = { 0x91ce67a8, 0xe0aa, 0x4012, { 0xb9, 0x9f, 0xb6, 0xfc, 0xf3, 0x4, 0x8e, 0xaa } }
  gArmScmiClock2ProtocolGuid = { 0xb8d8caf2, 0x9e94, 0x462c, { 0xa8, 0x34, 0x6c, 0x99, 0xfc, 0x05, 0xef, 0xcf } }

  ## Arm System Control and Management Interface(SCMI) Clock management protocol
  ## ArmPkg/Include/Protocol/ArmScmiPerformanceProtocol.h
  gArmScmiPerformanceProtocolGuid = { 0x9b8ba84, 0x3dd3, 0x49a6, { 0xa0, 0x5a, 0x31, 0x34, 0xa5, 0xf0, 0x7b, 0xad } }

[Ppis]
  ## Include/Ppi/ArmMpCoreInfo.h
  gArmMpCoreInfoPpiGuid = { 0x6847cc74, 0xe9ec, 0x4f8f, {0xa2, 0x9d, 0xab, 0x44, 0xe7, 0x54, 0xa8, 0xfc} }

[PcdsFeatureFlag.common]
  gArmTokenSpaceGuid.PcdCpuDxeProduceDebugSupport|FALSE|BOOLEAN|0x00000001

  # On ARM Architecture with the Security Extension, the address for the
  # Vector Table can be mapped anywhere in the memory map. It means we can
  # point the Exception Vector Table to its location in CpuDxe.
  # By default we copy the Vector Table at  PcdGet64(PcdCpuVectorBaseAddress)
  gArmTokenSpaceGuid.PcdRelocateVectorTable|TRUE|BOOLEAN|0x00000022
  # Set this PCD to TRUE if the Exception Vector is changed to add debugger support before
  # it has been configured by the CPU DXE
  gArmTokenSpaceGuid.PcdDebuggerExceptionSupport|FALSE|BOOLEAN|0x00000032

  # Define if the GICv3 controller should use the GICv2 legacy
  gArmTokenSpaceGuid.PcdArmGicV3WithV2Legacy|FALSE|BOOLEAN|0x00000042

  ## Define the conduit to use for monitor calls.
  # Default PcdMonitorConduitHvc = FALSE, conduit = SMC
  # If PcdMonitorConduitHvc = TRUE, conduit = HVC
  gArmTokenSpaceGuid.PcdMonitorConduitHvc|FALSE|BOOLEAN|0x00000047

[PcdsFeatureFlag.ARM]
  # Whether to map normal memory as non-shareable. FALSE is the safe choice, but
  # TRUE may be appropriate to fix performance problems if you don't care about
  # hardware coherency (i.e., no virtualization or cache coherent DMA)
  gArmTokenSpaceGuid.PcdNormalMemoryNonshareableOverride|FALSE|BOOLEAN|0x00000043

[PcdsFeatureFlag.AARCH64, PcdsFeatureFlag.ARM]
  ## Used to select method for requesting services from S-EL1.<BR><BR>
  #   TRUE  - Selects FF-A calls for communication between S-EL0 and SPMC.<BR>
  #   FALSE - Selects SVC calls for communication between S-EL0 and SPMC.<BR>
  # @Prompt Enable FF-A support.
  gArmTokenSpaceGuid.PcdFfaEnable|FALSE|BOOLEAN|0x0000005B

[PcdsFixedAtBuild.common]
  gArmTokenSpaceGuid.PcdTrustzoneSupport|FALSE|BOOLEAN|0x00000006

  # This PCD should be a FeaturePcd. But we used this PCD as an '#if' in an ASM file.
  # Using a FeaturePcd make a '(BOOLEAN) casting for its value which is not understood by the preprocessor.
  gArmTokenSpaceGuid.PcdVFPEnabled|0|UINT32|0x00000024

  gArmTokenSpaceGuid.PcdCpuVectorBaseAddress|0xffff0000|UINT64|0x00000004
  gArmTokenSpaceGuid.PcdCpuResetAddress|0x00000000|UINT32|0x00000005

  #
  # ARM Secure Firmware PCDs
  #
  gArmTokenSpaceGuid.PcdSecureFdBaseAddress|0|UINT64|0x00000015
  gArmTokenSpaceGuid.PcdSecureFdSize|0|UINT32|0x00000016
  gArmTokenSpaceGuid.PcdSecureFvBaseAddress|0x0|UINT64|0x0000002F
  gArmTokenSpaceGuid.PcdSecureFvSize|0x0|UINT32|0x00000030

  #
  # ARM Hypervisor Firmware PCDs
  #
  gArmTokenSpaceGuid.PcdHypFdBaseAddress|0|UINT32|0x0000003A
  gArmTokenSpaceGuid.PcdHypFdSize|0|UINT32|0x0000003B
  gArmTokenSpaceGuid.PcdHypFvBaseAddress|0|UINT32|0x0000003C
  gArmTokenSpaceGuid.PcdHypFvSize|0|UINT32|0x0000003D

  # Use ClusterId + CoreId to identify the PrimaryCore
  gArmTokenSpaceGuid.PcdArmPrimaryCoreMask|0xF03|UINT32|0x00000031
  # The Primary Core is ClusterId[0] & CoreId[0]
  gArmTokenSpaceGuid.PcdArmPrimaryCore|0|UINT32|0x00000037

  #
  # SMBIOS PCDs
  #
  gArmTokenSpaceGuid.PcdSystemProductName|L""|VOID*|0x30000053
  gArmTokenSpaceGuid.PcdSystemVersion|L""|VOID*|0x30000054
  gArmTokenSpaceGuid.PcdBaseBoardManufacturer|L""|VOID*|0x30000055
  gArmTokenSpaceGuid.PcdBaseBoardProductName|L""|VOID*|0x30000056
  gArmTokenSpaceGuid.PcdBaseBoardVersion|L""|VOID*|0x30000057
  gArmTokenSpaceGuid.PcdProcessorManufacturer|L""|VOID*|0x30000071
  gArmTokenSpaceGuid.PcdProcessorVersion|L""|VOID*|0x30000072
  gArmTokenSpaceGuid.PcdProcessorSerialNumber|L""|VOID*|0x30000073
  gArmTokenSpaceGuid.PcdProcessorAssetTag|L""|VOID*|0x30000074
  gArmTokenSpaceGuid.PcdProcessorPartNumber|L""|VOID*|0x30000075

  #
  # ARM L2x0 PCDs
  #
  gArmTokenSpaceGuid.PcdL2x0ControllerBase|0|UINT32|0x0000001B

  #
  # ARM Normal (or Non Secure) Firmware PCDs
  #
  gArmTokenSpaceGuid.PcdFdSize|0|UINT32|0x0000002C
  gArmTokenSpaceGuid.PcdFvSize|0|UINT32|0x0000002E

  #
  # Value to add to a host address to obtain a device address, using
  # unsigned 64-bit integer arithmetic on both ARM and AArch64. This
  # means we can rely on truncation on overflow to specify negative
  # offsets.
  #
  gArmTokenSpaceGuid.PcdArmDmaDeviceOffset|0x0|UINT64|0x0000044

[PcdsFixedAtBuild.common, PcdsPatchableInModule.common]
  gArmTokenSpaceGuid.PcdFdBaseAddress|0|UINT64|0x0000002B
  gArmTokenSpaceGuid.PcdFvBaseAddress|0|UINT64|0x0000002D

[PcdsFixedAtBuild.ARM]
  #
  # ARM Security Extension
  #

  # Secure Configuration Register
  # - BIT0 : NS - Non Secure bit
  # - BIT1 : IRQ Handler
  # - BIT2 : FIQ Handler
  # - BIT3 : EA - External Abort
  # - BIT4 : FW - F bit writable
  # - BIT5 : AW - A bit writable
  # - BIT6 : nET - Not Early Termination
  # - BIT7 : SCD - Secure Monitor Call Disable
  # - BIT8 : HCE - Hyp Call enable
  # - BIT9 : SIF - Secure Instruction Fetch
  # 0x31 = NS | EA | FW
  gArmTokenSpaceGuid.PcdArmScr|0x31|UINT32|0x00000038

  # By default we do not do a transition to non-secure mode
  gArmTokenSpaceGuid.PcdArmNonSecModeTransition|0x0|UINT32|0x0000003E

  # Non Secure Access Control Register
  # - BIT15 : NSASEDIS - Disable Non-secure Advanced SIMD functionality
  # - BIT14 : NSD32DIS - Disable Non-secure use of D16-D31
  # - BIT11 : cp11 - Non-secure access to coprocessor 11 enable
  # - BIT10 : cp10 - Non-secure access to coprocessor 10 enable
  # 0xC00 = cp10 | cp11
  gArmTokenSpaceGuid.PcdArmNsacr|0xC00|UINT32|0x00000039

[PcdsFixedAtBuild.AARCH64]
  #
  # AArch64 Security Extension
  #

  # Secure Configuration Register
  # - BIT0 : NS - Non Secure bit
  # - BIT1 : IRQ Handler
  # - BIT2 : FIQ Handler
  # - BIT3 : EA - External Abort
  # - BIT4 : FW - F bit writable
  # - BIT5 : AW - A bit writable
  # - BIT6 : nET - Not Early Termination
  # - BIT7 : SCD - Secure Monitor Call Disable
  # - BIT8 : HCE - Hyp Call enable
  # - BIT9 : SIF - Secure Instruction Fetch
  # - BIT10: RW -  Register width control for lower exception levels
  # - BIT11: SIF - Enables Secure EL1 access to EL1 Architectural Timer
  # - BIT12: TWI - Trap WFI
  # - BIT13: TWE - Trap WFE
  # 0x501 = NS | HCE | RW
  gArmTokenSpaceGuid.PcdArmScr|0x501|UINT32|0x00000038

  # By default we do transition to EL2 non-secure mode with Stack for EL2.
  #        Mode Description              Bits
  # NS EL2 SP2 all interrupts disabled =  0x3c9
  # NS EL1 SP1 all interrupts disabled =  0x3c5
  # Other modes include using SP0 or switching to Aarch32, but these are
  # not currently supported.
  gArmTokenSpaceGuid.PcdArmNonSecModeTransition|0x3c9|UINT32|0x0000003E


#
# These PCDs are also defined as 'PcdsDynamic' or 'PcdsPatchableInModule' to be
# redefined when using UEFI in a context of virtual machine.
#
[PcdsFixedAtBuild.common, PcdsDynamic.common, PcdsPatchableInModule.common]

  # System Memory (DRAM): These PCDs define the region of in-built system memory
  # Some platforms can get DRAM extensions, these additional regions may be
  # declared to UEFI using separate resource descriptor HOBs
  gArmTokenSpaceGuid.PcdSystemMemoryBase|0|UINT64|0x00000029
  gArmTokenSpaceGuid.PcdSystemMemorySize|0|UINT64|0x0000002A

  gArmTokenSpaceGuid.PcdMmBufferBase|0|UINT64|0x00000045
  gArmTokenSpaceGuid.PcdMmBufferSize|0|UINT64|0x00000046

  gArmTokenSpaceGuid.PcdSystemBiosRelease|0xFFFF|UINT16|0x30000058
  gArmTokenSpaceGuid.PcdEmbeddedControllerFirmwareRelease|0xFFFF|UINT16|0x30000059

[PcdsFixedAtBuild.common, PcdsDynamic.common]
  #
  # ARM Architectural Timer
  #
  gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|0|UINT32|0x00000034

  # ARM Architectural Timer Interrupt(GIC PPI) numbers
  gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|29|UINT32|0x00000035
  gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|30|UINT32|0x00000036
  gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|26|UINT32|0x00000040
  gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|27|UINT32|0x00000041

  #
  # ARM Generic Watchdog
  #

  gArmTokenSpaceGuid.PcdGenericWatchdogControlBase|0x2A440000|UINT64|0x00000007
  gArmTokenSpaceGuid.PcdGenericWatchdogRefreshBase|0x2A450000|UINT64|0x00000008
  gArmTokenSpaceGuid.PcdGenericWatchdogEl2IntrNum|93|UINT32|0x00000009

  #
  # ARM Generic Interrupt Controller
  #
  gArmTokenSpaceGuid.PcdGicDistributorBase|0|UINT64|0x0000000C
  # Base address for the GIC Redistributor region that contains the boot CPU
  gArmTokenSpaceGuid.PcdGicRedistributorsBase|0|UINT64|0x0000000E
  gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase|0|UINT64|0x0000000D
  gArmTokenSpaceGuid.PcdGicSgiIntId|0|UINT32|0x00000025

  #
  # Bases, sizes and translation offsets of IO and MMIO spaces, respectively.
  # Note that "IO" is just another MMIO range that simulates IO space; there
  # are no special instructions to access it.
  #
  # The base addresses PcdPciIoBase, PcdPciMmio32Base and PcdPciMmio64Base are
  # specific to their containing address spaces. In order to get the physical
  # address for the CPU, for a given access, the respective translation value
  # has to be added.
  #
  # The translations always have to be initialized like this, using UINT64:
  #
  #   UINT64 IoCpuBase;     // mapping target in 64-bit cpu-physical space
  #   UINT64 Mmio32CpuBase; // mapping target in 64-bit cpu-physical space
  #   UINT64 Mmio64CpuBase; // mapping target in 64-bit cpu-physical space
  #
  #   gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation = IoCpuBase - PcdPciIoBase;
  #   gEfiMdePkgTokenSpaceGuid.PcdPciMmio32Translation = Mmio32CpuBase - (UINT64)PcdPciMmio32Base;
  #   gEfiMdePkgTokenSpaceGuid.PcdPciMmio64Translation = Mmio64CpuBase - PcdPciMmio64Base;
  #
  # because (a) the target address space (ie. the cpu-physical space) is
  # 64-bit, and (b) the translation values are meant as offsets for *modular*
  # arithmetic.
  #
  # Accordingly, the translation itself needs to be implemented as:
  #
  #   UINT64 UntranslatedIoAddress;     // input parameter
  #   UINT32 UntranslatedMmio32Address; // input parameter
  #   UINT64 UntranslatedMmio64Address; // input parameter
  #
  #   UINT64 TranslatedIoAddress;       // output parameter
  #   UINT64 TranslatedMmio32Address;   // output parameter
  #   UINT64 TranslatedMmio64Address;   // output parameter
  #
  #   TranslatedIoAddress     = UntranslatedIoAddress +
  #                             gEfiMdePkgTokenSpaceGuid.PcdPciIoTranslation;
  #   TranslatedMmio32Address = (UINT64)UntranslatedMmio32Address +
  #                             gEfiMdePkgTokenSpaceGuid.PcdPciMmio32Translation;
  #   TranslatedMmio64Address = UntranslatedMmio64Address +
  #                             gEfiMdePkgTokenSpaceGuid.PcdPciMmio64Translation;
  #
  #  The modular arithmetic performed in UINT64 ensures that the translation
  #  works correctly regardless of the relation between IoCpuBase and
  #  PcdPciIoBase, Mmio32CpuBase and PcdPciMmio32Base, and Mmio64CpuBase and
  #  PcdPciMmio64Base.
  #
  gArmTokenSpaceGuid.PcdPciIoBase|0x0|UINT64|0x00000050
  gArmTokenSpaceGuid.PcdPciIoSize|0x0|UINT64|0x00000051
  gArmTokenSpaceGuid.PcdPciMmio32Base|0x0|UINT32|0x00000053
  gArmTokenSpaceGuid.PcdPciMmio32Size|0x0|UINT32|0x00000054
  gArmTokenSpaceGuid.PcdPciMmio64Base|0x0|UINT64|0x00000056
  gArmTokenSpaceGuid.PcdPciMmio64Size|0x0|UINT64|0x00000057

  #
  # Inclusive range of allowed PCI buses.
  #
  gArmTokenSpaceGuid.PcdPciBusMin|0x0|UINT32|0x00000059
  gArmTokenSpaceGuid.PcdPciBusMax|0x0|UINT32|0x0000005A

[PcdsDynamicEx]
  #
  # This dynamic PCD hold the GUID of a firmware FFS which contains
  # the LinuxBoot payload.
  #
  gArmTokenSpaceGuid.PcdLinuxBootFileGuid|{0x0}|VOID*|0x0000005C