/** @file
  I2C PEI Lib Instance.

  Copyright (c) 1999- 2015, Intel Corporation. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef I2C_PEI_REGS_H
#define I2C_PEI_REGS_H

#include "PiPei.h"

#define R_PCH_LPC_PMC_BASE                        0x44
#define B_PCH_LPC_PMC_BASE_BAR                    0xFFFFFE00
#define R_PCH_PMC_FUNC_DIS                        0x34  // Function Disable Register
#define PCIEX_BASE_ADDRESS                        0xE0000000
#define PciD31F0RegBase                           PCIEX_BASE_ADDRESS + (UINT32) (31 << 15)
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC7             BIT7  // LPSS SPI Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC6             BIT6  // LPSS HSUART #2 Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC5             BIT5  // LPSS HSUART #1 Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC4             BIT4  // LPSS I2S Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC3             BIT3  // LPSS PCM Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC2             BIT2  // LPSS I2C #2 Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC1             BIT1  // LPSS I2C #1 Disable
#define B_PCH_PMC_FUNC_DIS_LPSS_FUNC0             BIT0  // LPSS DMA Disable


#define DEFAULT_PCI_BUS_NUMBER_PCH       0

#define R_PCH_LPSS_I2C_STSCMD                     0x04  // Status & Command
#define B_PCH_LPSS_I2C_STSCMD_RMA                 BIT29 // RMA
#define B_PCH_LPSS_I2C_STSCMD_RCA                 BIT28 // RCA
#define B_PCH_LPSS_I2C_STSCMD_CAPLIST             BIT20 // Capability List
#define B_PCH_LPSS_I2C_STSCMD_INTRSTS             BIT19 // Interrupt Status
#define B_PCH_LPSS_I2C_STSCMD_INTRDIS             BIT10 // Interrupt Disable
#define B_PCH_LPSS_I2C_STSCMD_SERREN              BIT8  // SERR# Enable
#define B_PCH_LPSS_I2C_STSCMD_BME                 BIT2  // Bus Master Enable
#define B_PCH_LPSS_I2C_STSCMD_MSE                 BIT1  // Memory Space Enable

#define R_PCH_LPSS_I2C_BAR                        0x10  // BAR
#define B_PCH_LPSS_I2C_BAR_BA                     0xFFFFF000 // Base Address
#define B_PCH_LPSS_I2C_BAR_SI                     0x00000FF0 // Size Indicator
#define B_PCH_LPSS_I2C_BAR_PF                     BIT3  // Prefetchable
#define B_PCH_LPSS_I2C_BAR_TYPE                   (BIT2 | BIT1) // Type
#define B_PCH_LPSS_I2C_BAR_MS                     BIT0  // Message Space

#define R_PCH_LPSS_I2C_BAR1                       0x14  // BAR 1
#define B_PCH_LPSS_I2C_BAR1_BA                    0xFFFFF000 // Base Address
#define B_PCH_LPSS_I2C_BAR1_SI                    0x00000FF0 // Size Indicator
#define B_PCH_LPSS_I2C_BAR1_PF                    BIT3  // Prefetchable
#define B_PCH_LPSS_I2C_BAR1_TYPE                  (BIT2 | BIT1) // Type
#define B_PCH_LPSS_I2C_BAR1_MS                    BIT0  // Message Space

#define NUM_RETRIES         0xFFFF

//
// LPIO I2C Module Memory Space Registers
//
#define R_PCH_LPIO_I2C_MEM_RESETS                 0x804 // Software Reset
#define B_PCH_LPIO_I2C_MEM_RESETS_FUNC            BIT1  // Function Clock Domain Reset
#define B_PCH_LPIO_I2C_MEM_RESETS_APB             BIT0  // APB Domain Reset

#define R_PCH_LPSS_I2C_MEM_PCP                    0x800 // Private Clock Parameters

#define  bit(a)                   1 << (a)

//
// MMIO Register Definitions
//

#define  I2C0_REG_SPACE_ADDR_BASE            0xFF138000  //01K

#define    R_IC_CON                          ( 0x00) // I2C Control
#define     B_IC_RESTART_EN                  BIT5
#define     B_IC_SLAVE_DISABLE               BIT6
#define     V_SPEED_STANDARD                 0x02
#define     V_SPEED_FAST                     0x04
#define     V_SPEED_HIGH                     0x06
#define     B_MASTER_MODE                    BIT0

#define    R_IC_TAR                          ( 0x04) // I2C Target Address
#define     IC_TAR_10BITADDR_MASTER           BIT12

#define    R_IC_SAR                          ( 0x08) // I2C Slave Address
#define    R_IC_HS_MADDR                     ( 0x0C) // I2C HS MasterMode Code Address
#define    R_IC_DATA_CMD                     ( 0x10) // I2C Rx/Tx Data Buffer and Command

#define    B_READ_CMD                         BIT8    // 1 = read, 0 = write
#define    B_CMD_STOP                         BIT9    // 1 = STOP
#define    B_CMD_RESTART                      BIT10   // 1 = IC_RESTART_EN

#define    V_WRITE_CMD_MASK                  ( 0xFF)

#define    R_IC_SS_SCL_HCNT                  ( 0x14) // Standard Speed I2C Clock SCL High Count
#define    R_IC_SS_SCL_LCNT                  ( 0x18) // Standard Speed I2C Clock SCL Low Count
#define    R_IC_FS_SCL_HCNT                  ( 0x1C) // Full Speed I2C Clock SCL High Count
#define    R_IC_FS_SCL_LCNT                  ( 0x20) // Full Speed I2C Clock SCL Low Count
#define    R_IC_HS_SCL_HCNT                  ( 0x24) // High Speed I2C Clock SCL High Count
#define    R_IC_HS_SCL_LCNT                  ( 0x28) // High Speed I2C Clock SCL Low Count
#define    R_IC_INTR_STAT                    ( 0x2C) // I2C Inetrrupt Status
#define    R_IC_INTR_MASK                    ( 0x30) // I2C Interrupt Mask
#define     I2C_INTR_GEN_CALL                 BIT11  // General call received
#define     I2C_INTR_START_DET                BIT10
#define     I2C_INTR_STOP_DET                 BIT9
#define     I2C_INTR_ACTIVITY                 BIT8
#define     I2C_INTR_TX_ABRT                  BIT6   // Set on NACK
#define     I2C_INTR_TX_EMPTY                 BIT4
#define     I2C_INTR_TX_OVER                  BIT3
#define     I2C_INTR_RX_FULL                  BIT2   // Data bytes in RX FIFO over threshold
#define     I2C_INTR_RX_OVER                  BIT1
#define     I2C_INTR_RX_UNDER                 BIT0
#define    R_IC_RawIntrStat                ( 0x34) // I2C Raw Interrupt Status
#define    R_IC_RX_TL                        ( 0x38) // I2C Receive FIFO Threshold
#define    R_IC_TX_TL                        ( 0x3C) // I2C Transmit FIFO Threshold
#define    R_IC_CLR_INTR                     ( 0x40) // Clear Combined and Individual Interrupts
#define    R_IC_CLR_RX_UNDER                 ( 0x44) // Clear RX_UNDER Interrupt
#define    R_IC_CLR_RX_OVER                  ( 0x48) // Clear RX_OVERinterrupt
#define    R_IC_CLR_TX_OVER                  ( 0x4C) // Clear TX_OVER interrupt
#define    R_IC_CLR_RD_REQ                   ( 0x50) // Clear RD_REQ interrupt
#define    R_IC_CLR_TX_ABRT                  ( 0x54) // Clear TX_ABRT interrupt
#define    R_IC_CLR_RX_DONE                  ( 0x58) // Clear RX_DONE interrupt
#define    R_IC_CLR_ACTIVITY                 ( 0x5C) // Clear ACTIVITY interrupt
#define    R_IC_CLR_STOP_DET                 ( 0x60) // Clear STOP_DET interrupt
#define    R_IC_CLR_START_DET                ( 0x64) // Clear START_DET interrupt
#define    R_IC_CLR_GEN_CALL                 ( 0x68) // Clear GEN_CALL interrupt
#define    R_IC_ENABLE                       ( 0x6C) // I2C Enable
#define    R_IC_STATUS                       ( 0x70) // I2C Status

#define    R_IC_SDA_HOLD                     ( 0x7C) // I2C IC_DEFAULT_SDA_HOLD//16bits

#define     STAT_MST_ACTIVITY                 BIT5   // Master FSM Activity Status.
#define     STAT_RFF                          BIT4   // RX FIFO is completely full
#define     STAT_RFNE                         BIT3   // RX FIFO is not empty
#define     STAT_TFE                          BIT2   // TX FIFO is completely empty
#define     STAT_TFNF                         BIT1   // TX FIFO is not full

#define    R_IC_TXFLR                        ( 0x74) // Transmit FIFO Level Register
#define    R_IC_RXFLR                        ( 0x78) // Receive FIFO Level Register
#define    R_IC_TX_ABRT_SOURCE               ( 0x80) // I2C Transmit Abort Status Register
#define    R_IC_SLV_DATA_NACK_ONLY           ( 0x84) // Generate SLV_DATA_NACK Register
#define    R_IC_DMA_CR                       ( 0x88) // DMA Control Register
#define    R_IC_DMA_TDLR                     ( 0x8C) // DMA Transmit Data Level
#define    R_IC_DMA_RDLR                     ( 0x90) // DMA Receive Data Level
#define    R_IC_SDA_SETUP                    ( 0x94) // I2C SDA Setup Register
#define    R_IC_ACK_GENERAL_CALL             ( 0x98) // I2C ACK General Call Register
#define    R_IC_ENABLE_STATUS                ( 0x9C) // I2C Enable Status Register
#define    R_IC_COMP_PARAM                   ( 0xF4) // Component Parameter Register
#define    R_IC_COMP_VERSION                 ( 0xF8) // Component Version ID
#define    R_IC_COMP_TYPE                    ( 0xFC) // Component Type

#define I2C_SS_SCL_HCNT_VALUE_100M           0x1DD
#define I2C_SS_SCL_LCNT_VALUE_100M           0x1E4
#define I2C_FS_SCL_HCNT_VALUE_100M           0x54
#define I2C_FS_SCL_LCNT_VALUE_100M           0x9a
#define I2C_HS_SCL_HCNT_VALUE_100M           0x7
#define I2C_HS_SCL_LCNT_VALUE_100M           0xE

//
// FIFO write workaround value.
//
#define     FIFO_WRITE_DELAY    2
#define     IC_TAR_10BITADDR_MASTER           BIT12
#define     FIFO_SIZE                         32
#define     R_IC_INTR_STAT                    ( 0x2C) // I2c Inetrrupt Status
#define     R_IC_INTR_MASK                    ( 0x30) // I2c Interrupt Mask
#define     I2C_INTR_GEN_CALL                 BIT11  // General call received
#define     I2C_INTR_START_DET                BIT10
#define     I2C_INTR_STOP_DET                 BIT9
#define     I2C_INTR_ACTIVITY                 BIT8
#define     I2C_INTR_TX_ABRT                  BIT6   // Set on NACK
#define     I2C_INTR_TX_EMPTY                 BIT4
#define     I2C_INTR_TX_OVER                  BIT3
#define     I2C_INTR_RX_FULL                  BIT2   // Data bytes in RX FIFO over threshold
#define     I2C_INTR_RX_OVER                  BIT1
#define     I2C_INTR_RX_UNDER                 BIT0

/**
  Programe all I2C controllers on LPSS. 
  
  I2C0 is function 1 of LPSS. I2C1 is function 2 of LPSS, etc..

  @param   VOID

  @return  EFI_SUCCESS
**/
EFI_STATUS
ProgramPciLpssI2C (
  VOID
  );

/**
  Reads a Byte from I2C Device.
 
  @param  I2cControllerIndex  I2C Bus no to which the I2C device has been connected
  @param  SlaveAddress        Device Address from which the byte value has to be read
  @param  Offset              Offset from which the data has to be read
  @param  *Byte               Address to which the value read has to be stored
  @param  Start               Whether a RESTART is issued before the byte is sent or received
  @param  End                 Whether STOP is generated after a data byte is sent or received  
                                  
  @return  EFI_SUCCESS        If the byte value has been successfully read
  @return  EFI_DEVICE_ERROR   Operation Failed, Device Error
**/
EFI_STATUS
ByteReadI2CBasic(
  IN  UINT8 I2cControllerIndex,
  IN  UINT8 SlaveAddress,
  IN  UINTN ReadBytes,
  OUT UINT8 *ReadBuffer,
  IN  UINT8 Start,
  IN  UINT8 End
  );

/**
  Writes a Byte to I2C Device.
 
  @param  I2cControllerIndex   I2C Bus no to which the I2C device has been connected
  @param  SlaveAddress         Device Address from which the byte value has to be written
  @param  Offset               Offset from which the data has to be read
  @param  *Byte                Address to which the value written is stored
  @param  Start               Whether a RESTART is issued before the byte is sent or received
  @param  End                 Whether STOP is generated after a data byte is sent or received  
                                  
  @return  EFI_SUCCESS         IF the byte value has been successfully written
  @return  EFI_DEVICE_ERROR    Operation Failed, Device Error
**/
EFI_STATUS
ByteWriteI2CBasic(
  IN  UINT8 I2cControllerIndex,
  IN  UINT8 SlaveAddress,
  IN  UINTN WriteBytes,
  IN  UINT8 *WriteBuffer,
  IN  UINT8 Start,
  IN  UINT8 End
  );

/**
  Reads a Byte from I2C Device.
 
  @param  I2cControllerIndex   I2C Bus no to which the I2C device has been connected
  @param  SlaveAddress         Device Address from which the byte value has to be read
  @param  Offset               Offset from which the data has to be read
  @param  ReadBytes            Number of bytes to be read
  @param  *ReadBuffer          Address to which the value read has to be stored
                                
  @return  EFI_SUCCESS       IF the byte value has been successfully read
  @return  EFI_DEVICE_ERROR  Operation Failed, Device Error
**/
EFI_STATUS
ByteReadI2C(
  IN  UINT8 I2cControllerIndex,
  IN  UINT8 SlaveAddress,
  IN  UINT8 Offset,
  IN  UINTN ReadBytes,
  OUT UINT8 *ReadBuffer
  );

/**
  Writes a Byte to I2C Device.
 
  @param  I2cControllerIndex  I2C Bus no to which the I2C device has been connected
  @param  SlaveAddress        Device Address from which the byte value has to be written
  @param  Offset              Offset from which the data has to be written
  @param  WriteBytes          Number of bytes to be written
  @param  *Byte               Address to which the value written is stored
                                
  @return  EFI_SUCCESS       IF the byte value has been successfully read
  @return  EFI_DEVICE_ERROR  Operation Failed, Device Error
**/
EFI_STATUS
ByteWriteI2C(
  IN  UINT8 I2cControllerIndex,
  IN  UINT8 SlaveAddress,
  IN  UINT8 Offset,
  IN  UINTN WriteBytes,
  IN  UINT8 *WriteBuffer
  );

#endif