/** @file
  UfsPassThruDxe driver is used to produce EFI_EXT_SCSI_PASS_THRU protocol interface
  for upper layer application to execute UFS-supported SCSI cmds.

  Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php.

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "UfsPassThru.h"

/**
  Wait for the value of the specified system memory set to the test value.

  @param  Address           The system memory address to test.
  @param  MaskValue         The mask value of memory.
  @param  TestValue         The test value of memory.
  @param  Timeout           The time out value for wait memory set, uses 100ns as a unit.

  @retval EFI_TIMEOUT       The system memory setting is time out.
  @retval EFI_SUCCESS       The system memory is correct set.

**/
EFI_STATUS
EFIAPI
UfsWaitMemSet (
  IN  UINTN                     Address,
  IN  UINT32                    MaskValue,
  IN  UINT32                    TestValue,
  IN  UINT64                    Timeout
  )
{
  UINT32     Value;
  UINT64     Delay;
  BOOLEAN    InfiniteWait;

  if (Timeout == 0) {
    InfiniteWait = TRUE;
  } else {
    InfiniteWait = FALSE;
  }

  Delay = DivU64x32 (Timeout, 10) + 1;

  do {
    //
    // Access PCI MMIO space to see if the value is the tested one.
    //
    Value = MmioRead32 (Address) & MaskValue;

    if (Value == TestValue) {
      return EFI_SUCCESS;
    }

    //
    // Stall for 1 microseconds.
    //
    MicroSecondDelay (1);

    Delay--;

  } while (InfiniteWait || (Delay > 0));

  return EFI_TIMEOUT;
}

/**
  Dump UIC command execution result for debugging.

  @param[in]   UicOpcode  The executed UIC opcode.
  @param[in]   Result     The result to be parsed.

**/
VOID
DumpUicCmdExecResult (
  IN  UINT8     UicOpcode,
  IN  UINT8     Result
  )
{
  if (UicOpcode <= UfsUicDmePeerSet) {
    switch (Result) {
      case 0x00:
        break;
      case 0x01:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - INVALID_MIB_ATTRIBUTE\n"));
        break;
      case 0x02:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - INVALID_MIB_ATTRIBUTE_VALUE\n"));
        break;
      case 0x03:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - READ_ONLY_MIB_ATTRIBUTE\n"));
        break;
      case 0x04:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - WRITE_ONLY_MIB_ATTRIBUTE\n"));
        break;
      case 0x05:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BAD_INDEX\n"));
        break;
      case 0x06:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - LOCKED_MIB_ATTRIBUTE\n"));
        break;
      case 0x07:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BAD_TEST_FEATURE_INDEX\n"));
        break;
      case 0x08:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - PEER_COMMUNICATION_FAILURE\n"));
        break; 
      case 0x09:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BUSY\n"));
        break;
      case 0x0A:
        DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - DME_FAILURE\n"));
        break;        
      default :
        ASSERT (FALSE);
        break;
    }
  } else {
    switch (Result) {
      case 0x00:
        break;
      case 0x01:
        DEBUG ((EFI_D_VERBOSE, "UIC control command fails - FAILURE\n"));
        break;     
      default :
        ASSERT (FALSE);
        break;
    }
  }
}

/**
  Dump QUERY RESPONSE UPIU result for debugging.

  @param[in]   Result  The result to be parsed.

**/
VOID
DumpQueryResponseResult (
  IN  UINT8     Result
  )
{
  switch (Result) {
    case 0xF6:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Parameter Not Readable\n"));
      break;
    case 0xF7:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Parameter Not Writeable\n"));
      break;
    case 0xF8:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Parameter Already Written\n"));
      break;
    case 0xF9:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Length\n"));
      break;
    case 0xFA:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Value\n"));
      break;
    case 0xFB:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Selector\n"));
      break;
    case 0xFC:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Index\n"));
      break;
    case 0xFD:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Idn\n"));
      break;
    case 0xFE:
      DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Opcode\n"));
      break; 
    case 0xFF:
      DEBUG ((EFI_D_VERBOSE, "Query Response with General Failure\n"));
      break;
    default :
      ASSERT (FALSE);
      break;
  }
}

/**
  Swap little endian to big endian.

  @param[in, out] Buffer      The data buffer. In input, it contains little endian data.
                              In output, it will become big endian.
  @param[in]      BufferSize  The length of converted data.

**/
VOID
SwapLittleEndianToBigEndian (
  IN OUT UINT8         *Buffer,
  IN     UINT32        BufferSize
  )
{
  UINT32 Index;
  UINT8  Temp;
  UINT32 SwapCount;

  SwapCount = BufferSize / 2;
  for (Index = 0; Index < SwapCount; Index++) {
    Temp = Buffer[Index];
    Buffer[Index] = Buffer[BufferSize - 1 - Index];
    Buffer[BufferSize - 1 - Index] = Temp;
  }
}

/**
  Fill TSF field of QUERY REQUEST UPIU.

  @param[in, out] TsfBase      The base address of TSF field of QUERY REQUEST UPIU.
  @param[in]      Opcode       The opcode of request.
  @param[in]      DescId       The descriptor ID of request.
  @param[in]      Index        The index of request.
  @param[in]      Selector     The selector of request.
  @param[in]      Length       The length of transferred data. The maximum is 4.
  @param[in]      Value        The value of transferred data.

**/
VOID
UfsFillTsfOfQueryReqUpiu (
  IN OUT UTP_UPIU_TSF        *TsfBase,
  IN     UINT8               Opcode,
  IN     UINT8               DescId    OPTIONAL,
  IN     UINT8               Index     OPTIONAL,
  IN     UINT8               Selector  OPTIONAL,
  IN     UINT16              Length    OPTIONAL,
  IN     UINT32              Value     OPTIONAL
  )
{
  ASSERT (TsfBase != NULL);
  ASSERT (Opcode <= UtpQueryFuncOpcodeTogFlag);

  TsfBase->Opcode   = Opcode;
  if (Opcode != UtpQueryFuncOpcodeNop) {
    TsfBase->DescId   = DescId;
    TsfBase->Index    = Index;
    TsfBase->Selector = Selector;

    if ((Opcode == UtpQueryFuncOpcodeRdDesc) || (Opcode == UtpQueryFuncOpcodeWrDesc)) {
      SwapLittleEndianToBigEndian ((UINT8*)&Length, sizeof (Length));
      TsfBase->Length = Length;
    }
  
    if (Opcode == UtpQueryFuncOpcodeWrAttr) {
      SwapLittleEndianToBigEndian ((UINT8*)&Value, sizeof (Value));
      TsfBase->Value  = Value;
    }
  }
}

/**
  Initialize COMMAND UPIU.

  @param[in, out] Command         The base address of COMMAND UPIU.
  @param[in]      Lun             The Lun on which the SCSI command is executed.
  @param[in]      TaskTag         The task tag of request.
  @param[in]      Cdb             The cdb buffer containing SCSI command.
  @param[in]      CdbLength       The cdb length.
  @param[in]      DataDirection   The direction of data transfer.
  @param[in]      ExpDataTranLen  The expected transfer data length.

  @retval EFI_SUCCESS     The initialization succeed.

**/
EFI_STATUS
UfsInitCommandUpiu (
  IN OUT UTP_COMMAND_UPIU              *Command,
  IN     UINT8                         Lun,
  IN     UINT8                         TaskTag,
  IN     UINT8                         *Cdb,
  IN     UINT8                         CdbLength,
  IN     UFS_DATA_DIRECTION            DataDirection,
  IN     UINT32                        ExpDataTranLen
  )
{
  UINT8                   Flags;

  ASSERT ((Command != NULL) && (Cdb != NULL));

  //
  // Task attribute is hard-coded to Ordered.
  //
  if (DataDirection == UfsDataIn) {
    Flags = BIT0 | BIT6;
  } else if (DataDirection == UfsDataOut) {
    Flags = BIT0 | BIT5;
  } else {
    Flags = BIT0;
  }

  //
  // Fill UTP COMMAND UPIU associated fields.
  //
  Command->TransCode = 0x01;
  Command->Flags     = Flags;
  Command->Lun       = Lun;
  Command->TaskTag   = TaskTag;
  Command->CmdSet    = 0x00;
  SwapLittleEndianToBigEndian ((UINT8*)&ExpDataTranLen, sizeof (ExpDataTranLen));
  Command->ExpDataTranLen = ExpDataTranLen;

  CopyMem (Command->Cdb, Cdb, CdbLength);

  return EFI_SUCCESS;
}

/**
  Initialize UTP PRDT for data transfer.

  @param[in] Prdt         The base address of PRDT.
  @param[in] Buffer       The buffer to be read or written.
  @param[in] BufferSize   The data size to be read or written.

  @retval EFI_SUCCESS     The initialization succeed.

**/
EFI_STATUS
UfsInitUtpPrdt (
  IN  UTP_TR_PRD                       *Prdt,
  IN  VOID                             *Buffer,
  IN  UINT32                           BufferSize
  )
{
  UINT32     PrdtIndex;
  UINT32     RemainingLen;
  UINT8      *Remaining;
  UINTN      PrdtNumber;

  if (BufferSize == 0) {
    return EFI_SUCCESS;
  }

  ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0);

  RemainingLen = BufferSize;
  Remaining    = Buffer;
  PrdtNumber   = (UINTN)DivU64x32 ((UINT64)BufferSize + UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);

  for (PrdtIndex = 0; PrdtIndex < PrdtNumber; PrdtIndex++) {
    if (RemainingLen < UFS_MAX_DATA_LEN_PER_PRD) {
      Prdt[PrdtIndex].DbCount = (UINT32)RemainingLen - 1;
    } else {
      Prdt[PrdtIndex].DbCount = UFS_MAX_DATA_LEN_PER_PRD - 1;
    }

    Prdt[PrdtIndex].DbAddr  = (UINT32)RShiftU64 ((UINT64)(UINTN)Remaining, 2);
    Prdt[PrdtIndex].DbAddrU = (UINT32)RShiftU64 ((UINT64)(UINTN)Remaining, 32);
    RemainingLen -= UFS_MAX_DATA_LEN_PER_PRD;
    Remaining    += UFS_MAX_DATA_LEN_PER_PRD;
  }

  return EFI_SUCCESS;
}

/**
  Initialize QUERY REQUEST UPIU.

  @param[in, out] QueryReq      The base address of QUERY REQUEST UPIU.
  @param[in]      TaskTag       The task tag of request.
  @param[in]      Opcode        The opcode of request.
  @param[in]      DescId        The descriptor ID of request.
  @param[in]      Index         The index of request.
  @param[in]      Selector      The selector of request.
  @param[in]      DataSize      The data size to be read or written.
  @param[in]      Data          The buffer to be read or written.

  @retval EFI_SUCCESS           The initialization succeed.

**/
EFI_STATUS
UfsInitQueryRequestUpiu (
  IN OUT UTP_QUERY_REQ_UPIU            *QueryReq,
  IN     UINT8                         TaskTag,
  IN     UINT8                         Opcode,
  IN     UINT8                         DescId,
  IN     UINT8                         Index,
  IN     UINT8                         Selector,
  IN     UINTN                         DataSize   OPTIONAL,
  IN     UINT8                         *Data      OPTIONAL
  )
{
  ASSERT (QueryReq != NULL);

  QueryReq->TransCode = 0x16;
  QueryReq->TaskTag   = TaskTag;
  if ((Opcode == UtpQueryFuncOpcodeRdDesc) || (Opcode == UtpQueryFuncOpcodeRdFlag) || (Opcode == UtpQueryFuncOpcodeRdAttr)) {
    QueryReq->QueryFunc = QUERY_FUNC_STD_READ_REQ;
  } else {
    QueryReq->QueryFunc = QUERY_FUNC_STD_WRITE_REQ;
  }

  if (Opcode == UtpQueryFuncOpcodeWrAttr) {
    UfsFillTsfOfQueryReqUpiu (&QueryReq->Tsf, Opcode, DescId, Index, Selector, 0, *(UINT32*)Data);
  } else if ((Opcode == UtpQueryFuncOpcodeRdDesc) || (Opcode == UtpQueryFuncOpcodeWrDesc)) {
    UfsFillTsfOfQueryReqUpiu (&QueryReq->Tsf, Opcode, DescId, Index, Selector, (UINT16)DataSize, 0);
  } else {
    UfsFillTsfOfQueryReqUpiu (&QueryReq->Tsf, Opcode, DescId, Index, Selector, 0, 0);
  }

  if (Opcode == UtpQueryFuncOpcodeWrDesc) {
    CopyMem (QueryReq + 1, Data, DataSize);
  }

  return EFI_SUCCESS;
}

/**
  Allocate COMMAND/RESPONSE UPIU for filling UTP TRD's command descriptor field.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  Lun               The Lun on which the SCSI command is executed.
  @param[in]  Packet            The pointer to the EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET data structure.
  @param[in]  Trd               The pointer to the UTP Transfer Request Descriptor.
  @param[out] CmdDescHost       A pointer to store the base system memory address of the allocated range.
  @param[out] CmdDescMapping    A resulting value to pass to Unmap().

  @retval EFI_SUCCESS           The creation succeed.
  @retval EFI_DEVICE_ERROR      The creation failed.
  @retval EFI_OUT_OF_RESOURCES  The memory resource is insufficient.

**/
EFI_STATUS
UfsCreateScsiCommandDesc (
  IN     UFS_PASS_THRU_PRIVATE_DATA                  *Private,
  IN     UINT8                                       Lun,
  IN     EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *Packet,
  IN     UTP_TRD                                     *Trd,
     OUT VOID                                        **CmdDescHost,
     OUT VOID                                        **CmdDescMapping
  )
{
  UINTN                             TotalLen;
  UINTN                             PrdtNumber;
  UTP_COMMAND_UPIU                  *CommandUpiu;
  EFI_PHYSICAL_ADDRESS              CmdDescPhyAddr;
  EFI_STATUS                        Status;
  UINT32                            DataLen;
  UFS_DATA_DIRECTION                DataDirection;

  ASSERT ((Private != NULL) && (Packet != NULL) && (Trd != NULL));

  if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
    DataLen       = Packet->InTransferLength;
    DataDirection = UfsDataIn;
  } else {
    DataLen       = Packet->OutTransferLength;
    DataDirection = UfsDataOut;
  }

  if (DataLen == 0) {
    DataDirection = UfsNoData;
  }

  PrdtNumber = (UINTN)DivU64x32 ((UINT64)DataLen + UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);

  TotalLen   = ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)) + PrdtNumber * sizeof (UTP_TR_PRD);

  Status = UfsAllocateAlignCommonBuffer (Private, TotalLen, CmdDescHost, &CmdDescPhyAddr, CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  CommandUpiu = (UTP_COMMAND_UPIU*)*CmdDescHost;

  UfsInitCommandUpiu (CommandUpiu, Lun, Private->TaskTag++, Packet->Cdb, Packet->CdbLength, DataDirection, DataLen);

  //
  // Fill UTP_TRD associated fields
  // NOTE: Some UFS host controllers request the Response UPIU and the Physical Region Description Table
  // *MUST* be located at a 64-bit aligned boundary.
  //
  Trd->Int    = UFS_INTERRUPT_COMMAND;
  Trd->Dd     = DataDirection;
  Trd->Ct     = UFS_STORAGE_COMMAND_TYPE;
  Trd->UcdBa  = (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 7);
  Trd->UcdBaU = (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32);
  Trd->RuL    = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)), sizeof (UINT32));
  Trd->RuO    = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)), sizeof (UINT32));
  Trd->PrdtL  = (UINT16)PrdtNumber;
  Trd->PrdtO  = (UINT16)DivU64x32 ((UINT64)(ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU))), sizeof (UINT32));
  return EFI_SUCCESS;
}

/**
  Allocate QUERY REQUEST/QUERY RESPONSE UPIU for filling UTP TRD's command descriptor field.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  Packet            The pointer to the UFS_DEVICE_MANAGEMENT_REQUEST_PACKET data structure.
  @param[in]  Trd               The pointer to the UTP Transfer Request Descriptor.
  @param[out] CmdDescHost       A pointer to store the base system memory address of the allocated range.
  @param[out] CmdDescMapping    A resulting value to pass to Unmap().

  @retval EFI_SUCCESS           The creation succeed.
  @retval EFI_DEVICE_ERROR      The creation failed.
  @retval EFI_OUT_OF_RESOURCES  The memory resource is insufficient.
  @retval EFI_INVALID_PARAMETER The parameter passed in is invalid.

**/
EFI_STATUS
UfsCreateDMCommandDesc (
  IN     UFS_PASS_THRU_PRIVATE_DATA            *Private,
  IN     UFS_DEVICE_MANAGEMENT_REQUEST_PACKET  *Packet,
  IN     UTP_TRD                               *Trd,
     OUT VOID                                  **CmdDescHost,
     OUT VOID                                  **CmdDescMapping
  )
{
  UINTN                         TotalLen;
  UTP_QUERY_REQ_UPIU            *QueryReqUpiu;
  UINT8                         Opcode;
  UINT32                        DataSize;
  UINT8                         *Data;
  UINT8                         DataDirection;
  EFI_PHYSICAL_ADDRESS          CmdDescPhyAddr;
  EFI_STATUS                    Status;

  ASSERT ((Private != NULL) && (Packet != NULL) && (Trd != NULL));

  Opcode = Packet->Opcode;
  if ((Opcode > UtpQueryFuncOpcodeTogFlag) || (Opcode == UtpQueryFuncOpcodeNop)) {
    return EFI_INVALID_PARAMETER;
  }

  DataDirection = Packet->DataDirection;
  if (DataDirection == UfsDataIn) {
    DataSize = Packet->InTransferLength;
    Data     = Packet->InDataBuffer;
  } else if (DataDirection == UfsDataOut) {
    DataSize = Packet->OutTransferLength;
    Data     = Packet->OutDataBuffer;
  } else {
    DataSize = 0;
    Data     = NULL;
  }

  if (((Opcode != UtpQueryFuncOpcodeSetFlag) && (Opcode != UtpQueryFuncOpcodeClrFlag) && (Opcode != UtpQueryFuncOpcodeTogFlag))
    && ((DataSize == 0) || (Data == NULL))) {
    return EFI_INVALID_PARAMETER;
  }

  if (((Opcode == UtpQueryFuncOpcodeSetFlag) || (Opcode == UtpQueryFuncOpcodeClrFlag) || (Opcode == UtpQueryFuncOpcodeTogFlag))
    && ((DataSize != 0) || (Data != NULL))) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Opcode == UtpQueryFuncOpcodeWrAttr) && (DataSize != sizeof (UINT32))) {
    return EFI_INVALID_PARAMETER;
  }

  if ((Opcode == UtpQueryFuncOpcodeWrDesc) || (Opcode == UtpQueryFuncOpcodeRdDesc)) {
    TotalLen = ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)) + ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU)) + ROUNDUP8 (DataSize);
  } else {
    TotalLen = ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)) + ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU));
  }

  Status = UfsAllocateAlignCommonBuffer (Private, TotalLen, CmdDescHost, &CmdDescPhyAddr, CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Initialize UTP QUERY REQUEST UPIU
  //
  QueryReqUpiu = (UTP_QUERY_REQ_UPIU*)*CmdDescHost;
  ASSERT (QueryReqUpiu != NULL);
  UfsInitQueryRequestUpiu (
    QueryReqUpiu,
    Private->TaskTag++,
    Opcode,
    Packet->DescId,
    Packet->Index,
    Packet->Selector,
    DataSize,
    Data
    );

  //
  // Fill UTP_TRD associated fields
  // NOTE: Some UFS host controllers request the Query Response UPIU *MUST* be located at a 64-bit aligned boundary.
  //
  Trd->Int    = UFS_INTERRUPT_COMMAND;
  Trd->Dd     = DataDirection;
  Trd->Ct     = UFS_STORAGE_COMMAND_TYPE;
  Trd->Ocs    = 0x0F;
  Trd->UcdBa  = (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 7);
  Trd->UcdBaU = (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32);
  if (Opcode == UtpQueryFuncOpcodeWrDesc) {
    Trd->RuL  = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU)), sizeof (UINT32));
    Trd->RuO  = (UINT16)DivU64x32 ((UINT64)(ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)) + ROUNDUP8 (DataSize)), sizeof (UINT32));
  } else {
    Trd->RuL  = (UINT16)DivU64x32 ((UINT64)(ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU)) + ROUNDUP8 (DataSize)), sizeof (UINT32));
    Trd->RuO  = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)), sizeof (UINT32));
  }

  return EFI_SUCCESS;
}

/**
  Allocate NOP IN and NOP OUT UPIU for filling UTP TRD's command descriptor field.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  Trd               The pointer to the UTP Transfer Request Descriptor.
  @param[out] CmdDescHost       A pointer to store the base system memory address of the allocated range.
  @param[out] CmdDescMapping    A resulting value to pass to Unmap().

  @retval EFI_SUCCESS           The creation succeed.
  @retval EFI_DEVICE_ERROR      The creation failed.
  @retval EFI_OUT_OF_RESOURCES  The memory resource is insufficient.

**/
EFI_STATUS
UfsCreateNopCommandDesc (
  IN     UFS_PASS_THRU_PRIVATE_DATA        *Private,
  IN     UTP_TRD                           *Trd,
     OUT VOID                              **CmdDescHost,
     OUT VOID                              **CmdDescMapping
  )
{
  UINTN                    TotalLen;
  UTP_NOP_OUT_UPIU         *NopOutUpiu;
  EFI_STATUS               Status;
  EFI_PHYSICAL_ADDRESS     CmdDescPhyAddr;

  ASSERT ((Private != NULL) && (Trd != NULL));

  TotalLen = ROUNDUP8 (sizeof (UTP_NOP_OUT_UPIU)) + ROUNDUP8 (sizeof (UTP_NOP_IN_UPIU));
  Status   = UfsAllocateAlignCommonBuffer (Private, TotalLen, CmdDescHost, &CmdDescPhyAddr, CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  NopOutUpiu = (UTP_NOP_OUT_UPIU*)*CmdDescHost;
  ASSERT (NopOutUpiu != NULL);
  NopOutUpiu->TaskTag = Private->TaskTag++;

  //
  // Fill UTP_TRD associated fields
  // NOTE: Some UFS host controllers request the Nop Out UPIU *MUST* be located at a 64-bit aligned boundary.
  //
  Trd->Int    = UFS_INTERRUPT_COMMAND;
  Trd->Dd     = 0x00;
  Trd->Ct     = UFS_STORAGE_COMMAND_TYPE;
  Trd->UcdBa  = (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 7);
  Trd->UcdBaU = (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32);
  Trd->RuL    = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_NOP_IN_UPIU)), sizeof (UINT32));
  Trd->RuO    = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_NOP_OUT_UPIU)), sizeof (UINT32));

  return EFI_SUCCESS;
}

/**
  Find out available slot in transfer list of a UFS device.

  @param[in]  Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[out] Slot          The available slot.

  @retval EFI_SUCCESS       The available slot was found successfully.

**/
EFI_STATUS
UfsFindAvailableSlotInTrl (
  IN     UFS_PASS_THRU_PRIVATE_DATA   *Private,
     OUT UINT8                        *Slot
  )
{
  ASSERT ((Private != NULL) && (Slot != NULL));

  //
  // The simplest algo to always use slot 0.
  // TODO: enhance it to support async transfer with multiple slot.
  //
  *Slot = 0;

  return EFI_SUCCESS;
}

/**
  Find out available slot in task management transfer list of a UFS device.

  @param[in]  Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[out] Slot          The available slot.

  @retval EFI_SUCCESS       The available slot was found successfully.

**/
EFI_STATUS
UfsFindAvailableSlotInTmrl (
  IN     UFS_PASS_THRU_PRIVATE_DATA   *Private,
     OUT UINT8                        *Slot
  )
{
  ASSERT ((Private != NULL) && (Slot != NULL));

  //
  // The simplest algo to always use slot 0.
  // TODO: enhance it to support async transfer with multiple slot.
  //
  *Slot = 0;

  return EFI_SUCCESS;
}

/**
  Start specified slot in transfer list of a UFS device.

  @param[in]  Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  Slot          The slot to be started.

**/
VOID
UfsStartExecCmd (
  IN  UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN  UINT8                        Slot
  ) 
{
  UINTN         UfsHcBase;
  UINTN         Address;
  UINT32        Data;

  UfsHcBase = Private->UfsHcBase;

  Address = UfsHcBase + UFS_HC_UTRLRSR_OFFSET;  
  Data    = MmioRead32 (Address);
  if ((Data & UFS_HC_UTRLRSR) != UFS_HC_UTRLRSR) {
    MmioWrite32 (Address, UFS_HC_UTRLRSR);
  }

  Address = UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
  MmioWrite32 (Address, BIT0 << Slot);
}

/**
  Stop specified slot in transfer list of a UFS device.

  @param[in]  Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  Slot          The slot to be stop.

**/
VOID
UfsStopExecCmd (
  IN  UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN  UINT8                        Slot
  ) 
{
  UINTN         UfsHcBase;
  UINTN         Address;
  UINT32        Data;

  UfsHcBase = Private->UfsHcBase;

  Address = UfsHcBase + UFS_HC_UTRLDBR_OFFSET;  
  Data    = MmioRead32 (Address);
  if ((Data & (BIT0 << Slot)) != 0) {
    Address = UfsHcBase + UFS_HC_UTRLCLR_OFFSET;  
    Data    = MmioRead32 (Address);
    MmioWrite32 (Address, (Data & ~(BIT0 << Slot)));
  }
}

/**
  Read or write specified device descriptor of a UFS device.

  @param[in]      Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]      Read          The boolean variable to show r/w direction.
  @param[in]      DescId        The ID of device descriptor.
  @param[in]      Index         The Index of device descriptor.
  @param[in]      Selector      The Selector of device descriptor.
  @param[in, out] Descriptor    The buffer of device descriptor to be read or written.
  @param[in]      DescSize      The size of device descriptor buffer.

  @retval EFI_SUCCESS           The device descriptor was read/written successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to r/w the device descriptor.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the completion of r/w the device descriptor.

**/
EFI_STATUS
UfsRwDeviceDesc (
  IN     UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN     BOOLEAN                      Read,
  IN     UINT8                        DescId,
  IN     UINT8                        Index,
  IN     UINT8                        Selector,
  IN OUT VOID                         *Descriptor,
  IN     UINT32                       DescSize
  )
{
  EFI_STATUS                           Status;
  UFS_DEVICE_MANAGEMENT_REQUEST_PACKET Packet;
  UINT8                                Slot;
  UTP_TRD                              *Trd;
  UINTN                                Address;
  UTP_QUERY_RESP_UPIU                  *QueryResp;
  UINT32                               CmdDescSize;
  UINT16                               ReturnDataSize;
  VOID                                 *CmdDescHost;
  VOID                                 *CmdDescMapping;
  EDKII_UFS_HOST_CONTROLLER_PROTOCOL   *UfsHc;

  ZeroMem (&Packet, sizeof (UFS_DEVICE_MANAGEMENT_REQUEST_PACKET));

  if (Read) {
    Packet.DataDirection     = UfsDataIn;
    Packet.InDataBuffer      = Descriptor;
    Packet.InTransferLength  = DescSize;
    Packet.Opcode            = UtpQueryFuncOpcodeRdDesc;
  } else {
    Packet.DataDirection     = UfsDataOut;
    Packet.OutDataBuffer     = Descriptor;
    Packet.OutTransferLength = DescSize;
    Packet.Opcode            = UtpQueryFuncOpcodeWrDesc;
  }
  Packet.DescId              = DescId;
  Packet.Index               = Index;
  Packet.Selector            = Selector;
  Packet.Timeout             = UFS_TIMEOUT;

  //
  // Find out which slot of transfer request list is available.
  //
  Status = UfsFindAvailableSlotInTrl (Private, &Slot);
  if (EFI_ERROR (Status)) {
    return Status;
  }
  
  Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
  //
  // Fill transfer request descriptor to this slot.
  //
  Status = UfsCreateDMCommandDesc (Private, &Packet, Trd, &CmdDescHost, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Check the transfer request result.
  //
  UfsHc       = Private->UfsHostController;
  QueryResp   = (UTP_QUERY_RESP_UPIU*)((UINT8*)CmdDescHost + Trd->RuO * sizeof (UINT32));
  ASSERT (QueryResp != NULL);
  CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);

  //
  // Start to execute the transfer request.
  //
  UfsStartExecCmd (Private, Slot);

  //
  // Wait for the completion of the transfer request.
  //  
  Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;  
  Status = UfsWaitMemSet (Address, BIT0, 0, Packet.Timeout);
  if (EFI_ERROR (Status)) {
    goto Exit;
  }

  if (QueryResp->QueryResp != 0) {
    DumpQueryResponseResult (QueryResp->QueryResp);
    Status = EFI_DEVICE_ERROR;
    goto Exit;
  }

  if (Trd->Ocs == 0) {
    ReturnDataSize = QueryResp->Tsf.Length;
    SwapLittleEndianToBigEndian ((UINT8*)&ReturnDataSize, sizeof (UINT16));

    if (Read) {
      CopyMem (Packet.InDataBuffer, (QueryResp + 1), ReturnDataSize);
      Packet.InTransferLength = ReturnDataSize;
    } else {
      Packet.OutTransferLength = ReturnDataSize;
    }
  } else {
    Status = EFI_DEVICE_ERROR;
  }

Exit:
  UfsHc->Flush (UfsHc);

  UfsStopExecCmd (Private, Slot);

  if (CmdDescMapping != NULL) {
    UfsHc->Unmap (UfsHc, CmdDescMapping);
  }
  if (CmdDescHost != NULL) {
    UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (CmdDescSize), CmdDescHost);
  }

  return Status;
}

/**
  Read or write specified attribute of a UFS device.

  @param[in]      Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]      Read          The boolean variable to show r/w direction.
  @param[in]      AttrId        The ID of Attribute.
  @param[in]      Index         The Index of Attribute.
  @param[in]      Selector      The Selector of Attribute.
  @param[in, out] Attributes    The value of Attribute to be read or written.

  @retval EFI_SUCCESS           The Attribute was read/written successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to r/w the Attribute.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the completion of r/w the Attribute.

**/
EFI_STATUS
UfsRwAttributes (
  IN     UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN     BOOLEAN                      Read,
  IN     UINT8                        AttrId,
  IN     UINT8                        Index,
  IN     UINT8                        Selector,
  IN OUT UINT32                       *Attributes
  )
{
  EFI_STATUS                           Status;
  UFS_DEVICE_MANAGEMENT_REQUEST_PACKET Packet;
  UINT8                                Slot;
  UTP_TRD                              *Trd;
  UINTN                                Address;
  UTP_QUERY_RESP_UPIU                  *QueryResp;
  UINT32                               CmdDescSize;
  UINT32                               ReturnData;
  VOID                                 *CmdDescHost;
  VOID                                 *CmdDescMapping;
  EDKII_UFS_HOST_CONTROLLER_PROTOCOL   *UfsHc;

  ZeroMem (&Packet, sizeof (UFS_DEVICE_MANAGEMENT_REQUEST_PACKET));

  if (Read) {
    Packet.DataDirection     = UfsDataIn;
    Packet.Opcode            = UtpQueryFuncOpcodeRdAttr;
  } else {
    Packet.DataDirection     = UfsDataOut;
    Packet.Opcode            = UtpQueryFuncOpcodeWrAttr;
  }
  Packet.DescId              = AttrId;
  Packet.Index               = Index;
  Packet.Selector            = Selector;
  Packet.Timeout             = UFS_TIMEOUT;

  //
  // Find out which slot of transfer request list is available.
  //
  Status = UfsFindAvailableSlotInTrl (Private, &Slot);
  if (EFI_ERROR (Status)) {
    return Status;
  }
  
  Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
  //
  // Fill transfer request descriptor to this slot.
  //
  Status = UfsCreateDMCommandDesc (Private, &Packet, Trd, &CmdDescHost, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Check the transfer request result.
  //
  UfsHc       = Private->UfsHostController;
  QueryResp   = (UTP_QUERY_RESP_UPIU*)((UINT8*)CmdDescHost + Trd->RuO * sizeof (UINT32));
  ASSERT (QueryResp != NULL);
  CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);

  //
  // Start to execute the transfer request.
  //
  UfsStartExecCmd (Private, Slot);

  //
  // Wait for the completion of the transfer request.
  //  
  Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;  
  Status = UfsWaitMemSet (Address, BIT0, 0, Packet.Timeout);
  if (EFI_ERROR (Status)) {
    goto Exit;
  }

  if (QueryResp->QueryResp != 0) {
    DumpQueryResponseResult (QueryResp->QueryResp);
    Status = EFI_DEVICE_ERROR;
    goto Exit;
  }

  if (Trd->Ocs == 0) {
    ReturnData = QueryResp->Tsf.Value;
    SwapLittleEndianToBigEndian ((UINT8*)&ReturnData, sizeof (UINT32));
    *Attributes = ReturnData;
  } else {
    Status = EFI_DEVICE_ERROR;
  }

Exit:
  UfsHc->Flush (UfsHc);

  UfsStopExecCmd (Private, Slot);

  if (CmdDescMapping != NULL) {
    UfsHc->Unmap (UfsHc, CmdDescMapping);
  }

  if (CmdDescHost != NULL) {
    UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (CmdDescSize), CmdDescHost);
  }

  return Status;
}

/**
  Read or write specified flag of a UFS device.

  @param[in]      Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]      Read          The boolean variable to show r/w direction.
  @param[in]      FlagId        The ID of flag to be read or written.
  @param[in, out] Value         The value to set or clear flag.

  @retval EFI_SUCCESS           The flag was read/written successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to r/w the flag.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the completion of r/w the flag.

**/
EFI_STATUS
UfsRwFlags (
  IN     UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN     BOOLEAN                      Read,
  IN     UINT8                        FlagId,
  IN OUT UINT8                        *Value
  )
{
  EFI_STATUS                           Status;
  UFS_DEVICE_MANAGEMENT_REQUEST_PACKET Packet;
  UINT8                                Slot;
  UTP_TRD                              *Trd;
  UINTN                                Address;
  UTP_QUERY_RESP_UPIU                  *QueryResp;
  UINT32                               CmdDescSize;
  VOID                                 *CmdDescHost;
  VOID                                 *CmdDescMapping;
  EDKII_UFS_HOST_CONTROLLER_PROTOCOL   *UfsHc;

  if (Value == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  ZeroMem (&Packet, sizeof (UFS_DEVICE_MANAGEMENT_REQUEST_PACKET));

  if (Read) {
    ASSERT (Value != NULL);
    Packet.DataDirection     = UfsDataIn;
    Packet.Opcode            = UtpQueryFuncOpcodeRdFlag;
  } else {
    Packet.DataDirection     = UfsDataOut;
    if (*Value == 1) {
      Packet.Opcode          = UtpQueryFuncOpcodeSetFlag;
    } else if (*Value == 0) {
      Packet.Opcode          = UtpQueryFuncOpcodeClrFlag;
    } else {
      return EFI_INVALID_PARAMETER;
    }
  }
  Packet.DescId              = FlagId;
  Packet.Index               = 0;
  Packet.Selector            = 0;
  Packet.Timeout             = UFS_TIMEOUT;

  //
  // Find out which slot of transfer request list is available.
  //
  Status = UfsFindAvailableSlotInTrl (Private, &Slot);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Fill transfer request descriptor to this slot.
  //
  Trd    = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
  Status = UfsCreateDMCommandDesc (Private, &Packet, Trd, &CmdDescHost, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Check the transfer request result.
  //
  UfsHc       = Private->UfsHostController;
  QueryResp   = (UTP_QUERY_RESP_UPIU*)((UINT8*)CmdDescHost + Trd->RuO * sizeof (UINT32));
  ASSERT (QueryResp != NULL);
  CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);

  //
  // Start to execute the transfer request.
  //
  UfsStartExecCmd (Private, Slot);

  //
  // Wait for the completion of the transfer request.
  //  
  Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;  
  Status = UfsWaitMemSet (Address, BIT0, 0, Packet.Timeout);
  if (EFI_ERROR (Status)) {
    goto Exit;
  }

  if (QueryResp->QueryResp != 0) {
    DumpQueryResponseResult (QueryResp->QueryResp);
    Status = EFI_DEVICE_ERROR;
    goto Exit;
  }

  if (Trd->Ocs == 0) {
    *Value = (UINT8)QueryResp->Tsf.Value;
  } else {
    Status = EFI_DEVICE_ERROR;
  }

Exit:
  UfsHc->Flush (UfsHc);

  UfsStopExecCmd (Private, Slot);

  if (CmdDescMapping != NULL) {
    UfsHc->Unmap (UfsHc, CmdDescMapping);
  }
  if (CmdDescHost != NULL) {
    UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (CmdDescSize), CmdDescHost);
  }

  return Status;
}

/**
  Set specified flag to 1 on a UFS device.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  FlagId            The ID of flag to be set.

  @retval EFI_SUCCESS           The flag was set successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to set the flag.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the completion of setting the flag.

**/
EFI_STATUS
UfsSetFlag (
  IN  UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN  UINT8                        FlagId
  )
{
  EFI_STATUS             Status;
  UINT8                  Value;

  Value  = 1;
  Status = UfsRwFlags (Private, FALSE, FlagId, &Value);

  return Status;
}

/**
  Clear specified flag to 0 on a UFS device.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  FlagId            The ID of flag to be cleared.

  @retval EFI_SUCCESS           The flag was cleared successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to clear the flag.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the completion of clearing the flag.

**/
EFI_STATUS
UfsClearFlag (
  IN  UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN  UINT8                        FlagId
  )
{
  EFI_STATUS             Status;
  UINT8                  Value;

  Value  = 0;
  Status = UfsRwFlags (Private, FALSE, FlagId, &Value);

  return Status;
}

/**
  Read specified flag from a UFS device.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  FlagId            The ID of flag to be read.
  @param[out] Value             The flag's value.

  @retval EFI_SUCCESS           The flag was read successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to read the flag.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the completion of reading the flag.

**/
EFI_STATUS
UfsReadFlag (
  IN     UFS_PASS_THRU_PRIVATE_DATA   *Private,
  IN     UINT8                        FlagId,
     OUT UINT8                        *Value
  )
{
  EFI_STATUS                           Status;

  Status = UfsRwFlags (Private, TRUE, FlagId, Value);

  return Status;
}

/**
  Sends NOP IN cmd to a UFS device for initialization process request.
  For more details, please refer to UFS 2.0 spec Figure 13.3.

  @param[in]  Private           The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS           The NOP IN command was sent by the host. The NOP OUT response was
                                received successfully.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to execute NOP IN command.
  @retval EFI_OUT_OF_RESOURCES  The resource for transfer is not available.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the NOP IN command to execute.

**/
EFI_STATUS
UfsExecNopCmds (
  IN  UFS_PASS_THRU_PRIVATE_DATA       *Private
  )
{
  EFI_STATUS                           Status;
  UINT8                                Slot;
  UTP_TRD                              *Trd;
  UTP_NOP_IN_UPIU                      *NopInUpiu;
  UINT32                               CmdDescSize;
  UINTN                                Address;
  VOID                                 *CmdDescHost;
  VOID                                 *CmdDescMapping;
  EDKII_UFS_HOST_CONTROLLER_PROTOCOL   *UfsHc;

  //
  // Find out which slot of transfer request list is available.
  //
  Status = UfsFindAvailableSlotInTrl (Private, &Slot);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Trd    = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
  Status = UfsCreateNopCommandDesc (Private, Trd, &CmdDescHost, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Check the transfer request result.
  //
  UfsHc       = Private->UfsHostController;
  NopInUpiu   = (UTP_NOP_IN_UPIU*)((UINT8*)CmdDescHost + Trd->RuO * sizeof (UINT32));
  ASSERT (NopInUpiu != NULL);
  CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);

  //
  // Start to execute the transfer request.
  //
  UfsStartExecCmd (Private, Slot);

  //
  // Wait for the completion of the transfer request.
  //  
  Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;  
  Status = UfsWaitMemSet (Address, BIT0, 0, UFS_TIMEOUT);
  if (EFI_ERROR (Status)) {
    goto Exit;
  }

  if (NopInUpiu->Resp != 0) {
    Status = EFI_DEVICE_ERROR;
  } else {
    Status = EFI_SUCCESS;
  }

Exit:
  UfsHc->Flush (UfsHc);

  UfsStopExecCmd (Private, Slot);

  if (CmdDescMapping != NULL) {
    UfsHc->Unmap (UfsHc, CmdDescMapping);
  }
  if (CmdDescHost != NULL) {
    UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (CmdDescSize), CmdDescHost);
  }

  return Status;
}

/**
  Sends a UFS-supported SCSI Request Packet to a UFS device that is attached to the UFS host controller.

  @param[in]      Private       The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]      Lun           The LUN of the UFS device to send the SCSI Request Packet.
  @param[in, out] Packet        A pointer to the SCSI Request Packet to send to a specified Lun of the
                                UFS device.

  @retval EFI_SUCCESS           The SCSI Request Packet was sent by the host. For bi-directional
                                commands, InTransferLength bytes were transferred from
                                InDataBuffer. For write and bi-directional commands,
                                OutTransferLength bytes were transferred by
                                OutDataBuffer.
  @retval EFI_DEVICE_ERROR      A device error occurred while attempting to send the SCSI Request
                                Packet.
  @retval EFI_OUT_OF_RESOURCES  The resource for transfer is not available.
  @retval EFI_TIMEOUT           A timeout occurred while waiting for the SCSI Request Packet to execute.

**/
EFI_STATUS
UfsExecScsiCmds (
  IN     UFS_PASS_THRU_PRIVATE_DATA                  *Private,
  IN     UINT8                                       Lun,
  IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET  *Packet
  )
{
  EFI_STATUS                           Status;
  UINT8                                Slot;
  UTP_TRD                              *Trd;
  UINTN                                Address;
  UINT32                               CmdDescSize;
  UTP_RESPONSE_UPIU                    *Response;
  UINT16                               SenseDataLen;
  UINT32                               ResTranCount;
  VOID                                 *CmdDescHost;
  VOID                                 *CmdDescMapping;
  VOID                                 *DataBufMapping;
  VOID                                 *DataBuf;
  EFI_PHYSICAL_ADDRESS                 DataBufPhyAddr;
  UINT32                               DataLen;
  UINTN                                MapLength;
  EDKII_UFS_HOST_CONTROLLER_PROTOCOL   *UfsHc;
  EDKII_UFS_HOST_CONTROLLER_OPERATION  Flag;
  UFS_DATA_DIRECTION                   DataDirection;
  UTP_TR_PRD                           *PrdtBase;

  Trd            = NULL;
  CmdDescHost    = NULL;
  CmdDescMapping = NULL;
  DataBufMapping = NULL;
  DataBufPhyAddr = 0;
  UfsHc          = Private->UfsHostController;
  //
  // Find out which slot of transfer request list is available.
  //
  Status = UfsFindAvailableSlotInTrl (Private, &Slot);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;

  //
  // Fill transfer request descriptor to this slot.
  //
  Status = UfsCreateScsiCommandDesc (Private, Lun, Packet, Trd, &CmdDescHost, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  CmdDescSize = Trd->PrdtO * sizeof (UINT32) + Trd->PrdtL * sizeof (UTP_TR_PRD);

  if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
    DataBuf       = Packet->InDataBuffer;
    DataLen       = Packet->InTransferLength;
    DataDirection = UfsDataIn;
    Flag          = EdkiiUfsHcOperationBusMasterWrite;
  } else {
    DataBuf       = Packet->OutDataBuffer;
    DataLen       = Packet->OutTransferLength;
    DataDirection = UfsDataOut;
    Flag          = EdkiiUfsHcOperationBusMasterRead;
  }

  if (DataLen == 0) {
    DataDirection = UfsNoData;
  } else {
    MapLength = DataLen;
    Status    = UfsHc->Map (
                         UfsHc,
                         Flag,
                         DataBuf,
                         &MapLength,
                         &DataBufPhyAddr,
                         &DataBufMapping
                         );

    if (EFI_ERROR (Status) || (DataLen != MapLength)) {
      goto Exit1;
    }
  }
  //
  // Fill PRDT table of Command UPIU for executed SCSI cmd.
  //
  PrdtBase = (UTP_TR_PRD*)((UINT8*)CmdDescHost + ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)));
  ASSERT (PrdtBase != NULL);
  UfsInitUtpPrdt (PrdtBase, (VOID*)(UINTN)DataBufPhyAddr, DataLen);

  //
  // Start to execute the transfer request.
  //
  UfsStartExecCmd (Private, Slot);

  //
  // Wait for the completion of the transfer request.
  //  
  Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;  
  Status = UfsWaitMemSet (Address, BIT0, 0, Packet->Timeout);
  if (EFI_ERROR (Status)) {
    goto Exit;
  }

  //
  // Get sense data if exists
  //
  Response     = (UTP_RESPONSE_UPIU*)((UINT8*)CmdDescHost + Trd->RuO * sizeof (UINT32));
  ASSERT (Response != NULL);
  SenseDataLen = Response->SenseDataLen;
  SwapLittleEndianToBigEndian ((UINT8*)&SenseDataLen, sizeof (UINT16));
  
  if ((Packet->SenseDataLength != 0) && (Packet->SenseData != NULL)) {
    CopyMem (Packet->SenseData, Response->SenseData, SenseDataLen);
    Packet->SenseDataLength = (UINT8)SenseDataLen;
  }

  //
  // Check the transfer request result.
  //
  Packet->TargetStatus = Response->Status;
  if (Response->Response != 0) {
    DEBUG ((EFI_D_ERROR, "UfsExecScsiCmds() fails with Target Failure\n"));
    Status = EFI_DEVICE_ERROR;
    goto Exit;
  }

  if (Trd->Ocs == 0) {
    if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {
      if ((Response->Flags & BIT5) == BIT5) {
        ResTranCount = Response->ResTranCount;
        SwapLittleEndianToBigEndian ((UINT8*)&ResTranCount, sizeof (UINT32));
        Packet->InTransferLength -= ResTranCount;
      }
    } else {
      if ((Response->Flags & BIT5) == BIT5) {
        ResTranCount = Response->ResTranCount;
        SwapLittleEndianToBigEndian ((UINT8*)&ResTranCount, sizeof (UINT32));
        Packet->OutTransferLength -= ResTranCount;
      }
    }
  } else {
    Status = EFI_DEVICE_ERROR;
  }

Exit:
  UfsHc->Flush (UfsHc);

  UfsStopExecCmd (Private, Slot);

  if (DataBufMapping != NULL) {
    UfsHc->Unmap (UfsHc, DataBufMapping);
  }

Exit1:
  if (CmdDescMapping != NULL) {
    UfsHc->Unmap (UfsHc, CmdDescMapping);
  }
  if (CmdDescHost != NULL) {
    UfsHc->FreeBuffer (UfsHc, EFI_SIZE_TO_PAGES (CmdDescSize), CmdDescHost);
  }
  return Status;
}


/**
  Sent UIC DME_LINKSTARTUP command to start the link startup procedure.

  @param[in] Private          The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in] UicOpcode        The opcode of the UIC command.
  @param[in] Arg1             The value for 1st argument of the UIC command.
  @param[in] Arg2             The value for 2nd argument of the UIC command.
  @param[in] Arg3             The value for 3rd argument of the UIC command.

  @return EFI_SUCCESS      Successfully execute this UIC command and detect attached UFS device.
  @return EFI_DEVICE_ERROR Fail to execute this UIC command and detect attached UFS device.
  @return EFI_NOT_FOUND    The presence of the UFS device isn't detected.

**/
EFI_STATUS
UfsExecUicCommands (
  IN  UFS_PASS_THRU_PRIVATE_DATA    *Private,
  IN  UINT8                         UicOpcode,
  IN  UINT32                        Arg1,
  IN  UINT32                        Arg2,
  IN  UINT32                        Arg3
  )
{
  EFI_STATUS  Status;
  UINTN       Address;
  UINT32      Data;
  UINTN       UfsHcBase;

  UfsHcBase = Private->UfsHcBase;
  Address   = UfsHcBase + UFS_HC_IS_OFFSET;
  Data      = MmioRead32 (Address);
  if ((Data & UFS_HC_IS_UCCS) == UFS_HC_IS_UCCS) {
    //
    // Clear IS.BIT10 UIC Command Completion Status (UCCS) at first.
    //
    MmioWrite32 (Address, Data);
  }

  //
  // When programming UIC command registers, host software shall set the register UICCMD
  // only after all the UIC command argument registers (UICCMDARG1, UICCMDARG2 and UICCMDARG3)
  // are set.
  //
  Address = UfsHcBase + UFS_HC_UCMD_ARG1_OFFSET;
  MmioWrite32 (Address, Arg1);

  Address = UfsHcBase + UFS_HC_UCMD_ARG2_OFFSET;
  MmioWrite32 (Address, Arg2);

  Address = UfsHcBase + UFS_HC_UCMD_ARG3_OFFSET;
  MmioWrite32 (Address, Arg3);

  //
  // Host software shall only set the UICCMD if HCS.UCRDY is set to 1.
  //
  Address = Private->UfsHcBase + UFS_HC_STATUS_OFFSET;
  Status = UfsWaitMemSet (Address, UFS_HC_HCS_UCRDY, UFS_HC_HCS_UCRDY, UFS_TIMEOUT);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Address = UfsHcBase + UFS_HC_UIC_CMD_OFFSET;
  MmioWrite32 (Address, (UINT32)UicOpcode);

  //
  // UFS 2.0 spec section 5.3.1 Offset:0x20 IS.Bit10 UIC Command Completion Status (UCCS)
  // This bit is set to '1' by the host controller upon completion of a UIC command. 
  //
  Address = UfsHcBase + UFS_HC_IS_OFFSET;
  Data    = MmioRead32 (Address);
  Status  = UfsWaitMemSet (Address, UFS_HC_IS_UCCS, UFS_HC_IS_UCCS, UFS_TIMEOUT);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  if (UicOpcode != UfsUicDmeReset) {
    Address = UfsHcBase + UFS_HC_UCMD_ARG2_OFFSET;
    Data    = MmioRead32 (Address);
    if ((Data & 0xFF) != 0) {
      DEBUG_CODE_BEGIN();
        DumpUicCmdExecResult (UicOpcode, (UINT8)(Data & 0xFF));
      DEBUG_CODE_END();
      return EFI_DEVICE_ERROR;
    }
  }

  //
  // Check value of HCS.DP and make sure that there is a device attached to the Link.
  //
  Address = UfsHcBase + UFS_HC_STATUS_OFFSET;  
  Data    = MmioRead32 (Address);
  if ((Data & UFS_HC_HCS_DP) == 0) {
    Address = UfsHcBase + UFS_HC_IS_OFFSET;
    Status  = UfsWaitMemSet (Address, UFS_HC_IS_ULSS, UFS_HC_IS_ULSS, UFS_TIMEOUT);
    if (EFI_ERROR (Status)) {
      return EFI_DEVICE_ERROR;
    }
    return EFI_NOT_FOUND;
  }

  DEBUG ((EFI_D_INFO, "UfsPassThruDxe: found a attached UFS device\n"));

  return EFI_SUCCESS;
}

/**
  Allocate common buffer for host and UFS bus master access simultaneously.

  @param[in]  Private                The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.
  @param[in]  Size                   The length of buffer to be allocated.
  @param[out] CmdDescHost            A pointer to store the base system memory address of the allocated range.
  @param[out] CmdDescPhyAddr         The resulting map address for the UFS bus master to use to access the hosts CmdDescHost.
  @param[out] CmdDescMapping         A resulting value to pass to Unmap().

  @retval EFI_SUCCESS                The common buffer was allocated successfully.
  @retval EFI_DEVICE_ERROR           The allocation fails.
  @retval EFI_OUT_OF_RESOURCES       The memory resource is insufficient.

**/
EFI_STATUS
UfsAllocateAlignCommonBuffer (
  IN     UFS_PASS_THRU_PRIVATE_DATA    *Private,
  IN     UINTN                         Size,
     OUT VOID                          **CmdDescHost,
     OUT EFI_PHYSICAL_ADDRESS          *CmdDescPhyAddr,
     OUT VOID                          **CmdDescMapping
  )
{
  EFI_STATUS                           Status;
  UINTN                                Bytes;
  BOOLEAN                              Is32BitAddr;
  EDKII_UFS_HOST_CONTROLLER_PROTOCOL   *UfsHc;

  if ((Private->Capabilities & UFS_HC_CAP_64ADDR) == UFS_HC_CAP_64ADDR) {
    Is32BitAddr = TRUE;
  } else {
    Is32BitAddr = FALSE;
  }

  UfsHc  = Private->UfsHostController;
  Status = UfsHc->AllocateBuffer (
                    UfsHc,
                    AllocateAnyPages,
                    EfiBootServicesData,
                    EFI_SIZE_TO_PAGES (Size),
                    CmdDescHost,
                    0
                    );
  if (EFI_ERROR (Status)) {
    *CmdDescMapping = NULL;
    *CmdDescHost    = NULL;
    *CmdDescPhyAddr = 0;
    return EFI_OUT_OF_RESOURCES;
  }

  Bytes  = EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Size));
  Status = UfsHc->Map (
                    UfsHc,
                    EdkiiUfsHcOperationBusMasterCommonBuffer,
                    *CmdDescHost,
                    &Bytes,
                    CmdDescPhyAddr,
                    CmdDescMapping
                    );

  if (EFI_ERROR (Status) || (Bytes != EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Size)))) {
    UfsHc->FreeBuffer (
             UfsHc,
             EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Size)),
             *CmdDescHost
             );
    *CmdDescHost = NULL;
    return EFI_OUT_OF_RESOURCES;
  }

  if (Is32BitAddr && ((*CmdDescPhyAddr) > 0x100000000ULL)) {
    //
    // The UFS host controller doesn't support 64bit addressing, so should not get a >4G UFS bus master address.
    //
    UfsHc->Unmap (
             UfsHc,
             *CmdDescMapping
             );
    UfsHc->FreeBuffer (
             UfsHc,
             EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Size)),
             *CmdDescHost
             );
    *CmdDescMapping = NULL;
    *CmdDescHost    = NULL;
    return EFI_DEVICE_ERROR;
  }

  ZeroMem (*CmdDescHost, EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Size)));
  return EFI_SUCCESS;
}

/**
  Enable the UFS host controller for accessing.

  @param[in] Private                 The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS                The UFS host controller enabling was executed successfully.
  @retval EFI_DEVICE_ERROR           A device error occurred while enabling the UFS host controller.

**/
EFI_STATUS
UfsEnableHostController (
  IN  UFS_PASS_THRU_PRIVATE_DATA     *Private
  )
{
  EFI_STATUS             Status;
  UINTN                  Address;
  UINT32                 Data;

  //
  // UFS 2.0 spec section 7.1.1 - Host Controller Initialization
  //
  // Reinitialize the UFS host controller if HCE bit of HC register is set.
  //
  Address = Private->UfsHcBase + UFS_HC_ENABLE_OFFSET;
  Data    = MmioRead32 (Address);
  if ((Data & UFS_HC_HCE_EN) == UFS_HC_HCE_EN) {
    //
    // Write a 0 to the HCE register at first to disable the host controller.
    //
    MmioWrite32 (Address, 0);
    //
    // Wait until HCE is read as '0' before continuing.
    //
    Status = UfsWaitMemSet (Address, UFS_HC_HCE_EN, 0, UFS_TIMEOUT);
    if (EFI_ERROR (Status)) {
      return EFI_DEVICE_ERROR;
    }
  }

  //
  // Write a 1 to the HCE register to enable the UFS host controller.
  //
  MmioWrite32 (Address, UFS_HC_HCE_EN);
  //
  // Wait until HCE is read as '1' before continuing.
  //
  Status = UfsWaitMemSet (Address, UFS_HC_HCE_EN, UFS_HC_HCE_EN, UFS_TIMEOUT);
  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }

  return EFI_SUCCESS;
}

/**
  Detect if a UFS device attached.

  @param[in] Private                 The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS                The UFS device detection was executed successfully.
  @retval EFI_NOT_FOUND              Not found a UFS device attached.
  @retval EFI_DEVICE_ERROR           A device error occurred while detecting the UFS device.

**/
EFI_STATUS
UfsDeviceDetection (
  IN  UFS_PASS_THRU_PRIVATE_DATA     *Private
  )
{
  UINTN                  Retry;
  EFI_STATUS             Status;

  //
  // Start UFS device detection.
  // Try up to 3 times for establishing data link with device.
  //
  for (Retry = 0; Retry < 3; Retry++) {
    Status = UfsExecUicCommands (Private, UfsUicDmeLinkStartup, 0, 0, 0);
    if (!EFI_ERROR (Status)) {
      break;
    }

    if (Status == EFI_NOT_FOUND) {
      continue;
    }

    return EFI_DEVICE_ERROR;
  }

  if (Retry == 3) {
    return EFI_NOT_FOUND;
  }

  return EFI_SUCCESS;
}

/**
  Initialize UFS task management request list related h/w context.

  @param[in] Private                 The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS                The UFS task management list was initialzed successfully.
  @retval EFI_DEVICE_ERROR           The initialization fails.

**/
EFI_STATUS
UfsInitTaskManagementRequestList (
  IN  UFS_PASS_THRU_PRIVATE_DATA     *Private
  )
{
  UINTN                  Address;
  UINT32                 Data;
  UINT8                  Nutmrs;
  VOID                   *CmdDescHost;
  EFI_PHYSICAL_ADDRESS   CmdDescPhyAddr;
  VOID                   *CmdDescMapping;
  EFI_STATUS             Status;
  
  //
  // Initial h/w and s/w context for future operations.
  //
  CmdDescHost    = NULL;
  CmdDescMapping = NULL;
  CmdDescPhyAddr = 0;
  Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;  
  Data    = MmioRead32 (Address);
  Private->Capabilities = Data;

  //
  // Allocate and initialize UTP Task Management Request List.
  //
  Nutmrs = (UINT8) (RShiftU64 ((Private->Capabilities & UFS_HC_CAP_NUTMRS), 16) + 1);
  Status = UfsAllocateAlignCommonBuffer (Private, Nutmrs * sizeof (UTP_TMRD), &CmdDescHost, &CmdDescPhyAddr, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Program the UTP Task Management Request List Base Address and UTP Task Management
  // Request List Base Address with a 64-bit address allocated at step 6.
  //
  Address = Private->UfsHcBase + UFS_HC_UTMRLBA_OFFSET;  
  MmioWrite32 (Address, (UINT32)(UINTN)CmdDescPhyAddr);
  Address = Private->UfsHcBase + UFS_HC_UTMRLBAU_OFFSET;  
  MmioWrite32 (Address, (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32));
  Private->UtpTmrlBase = CmdDescHost;
  Private->Nutmrs      = Nutmrs;
  Private->TmrlMapping = CmdDescMapping;

  //
  // Enable the UTP Task Management Request List by setting the UTP Task Management
  // Request List RunStop Register (UTMRLRSR) to '1'.
  //
  Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;  
  MmioWrite32 (Address, UFS_HC_UTMRLRSR);

  return EFI_SUCCESS;
}

/**
  Initialize UFS transfer request list related h/w context.

  @param[in] Private                 The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS                The UFS transfer list was initialzed successfully.
  @retval EFI_DEVICE_ERROR           The initialization fails.

**/
EFI_STATUS
UfsInitTransferRequestList (
  IN  UFS_PASS_THRU_PRIVATE_DATA     *Private
  )
{
  UINTN                  Address;
  UINT32                 Data;
  UINT8                  Nutrs;
  VOID                   *CmdDescHost;
  EFI_PHYSICAL_ADDRESS   CmdDescPhyAddr;
  VOID                   *CmdDescMapping;  
  EFI_STATUS             Status;

  //
  // Initial h/w and s/w context for future operations.
  //
  CmdDescHost    = NULL;
  CmdDescMapping = NULL;
  CmdDescPhyAddr = 0;
  Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;  
  Data    = MmioRead32 (Address);
  Private->Capabilities = Data;

  //
  // Allocate and initialize UTP Transfer Request List.
  //
  Nutrs  = (UINT8)((Private->Capabilities & UFS_HC_CAP_NUTRS) + 1);
  Status = UfsAllocateAlignCommonBuffer (Private, Nutrs * sizeof (UTP_TRD), &CmdDescHost, &CmdDescPhyAddr, &CmdDescMapping);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Program the UTP Transfer Request List Base Address and UTP Transfer Request List
  // Base Address with a 64-bit address allocated at step 8.
  //
  Address = Private->UfsHcBase + UFS_HC_UTRLBA_OFFSET;  
  MmioWrite32 (Address, (UINT32)(UINTN)CmdDescPhyAddr);
  Address = Private->UfsHcBase + UFS_HC_UTRLBAU_OFFSET;  
  MmioWrite32 (Address, (UINT32)RShiftU64 ((UINT64)CmdDescPhyAddr, 32));
  Private->UtpTrlBase = CmdDescHost;
  Private->Nutrs      = Nutrs;  
  Private->TrlMapping = CmdDescMapping;

  //
  // Enable the UTP Transfer Request List by setting the UTP Transfer Request List
  // RunStop Register (UTRLRSR) to '1'.
  //
  Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;  
  MmioWrite32 (Address, UFS_HC_UTRLRSR);

  return EFI_SUCCESS;
}

/**
  Initialize the UFS host controller.

  @param[in] Private                 The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS                The Ufs Host Controller is initialized successfully.
  @retval Others                     A device error occurred while initializing the controller.

**/
EFI_STATUS
UfsControllerInit (
  IN  UFS_PASS_THRU_PRIVATE_DATA     *Private
  )
{
  EFI_STATUS             Status;

  Status = UfsEnableHostController (Private);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "UfsControllerInit: Enable Host Controller Fails, Status = %r\n", Status));
    return Status;
  }

  Status = UfsDeviceDetection (Private);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "UfsControllerInit: Device Detection Fails, Status = %r\n", Status));
    return Status;
  }

  Status = UfsInitTaskManagementRequestList (Private);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "UfsControllerInit: Task management list initialization Fails, Status = %r\n", Status));
    return Status;
  }

  Status = UfsInitTransferRequestList (Private);
  if (EFI_ERROR (Status)) {
    DEBUG ((EFI_D_ERROR, "UfsControllerInit: Transfer list initialization Fails, Status = %r\n", Status));
    return Status;
  }

  DEBUG ((EFI_D_INFO, "UfsControllerInit Finished\n"));
  return EFI_SUCCESS;
}

/**
  Stop the UFS host controller.

  @param[in] Private                 The pointer to the UFS_PASS_THRU_PRIVATE_DATA data structure.

  @retval EFI_SUCCESS                The Ufs Host Controller is stopped successfully.
  @retval Others                     A device error occurred while stopping the controller.

**/
EFI_STATUS
UfsControllerStop (
  IN  UFS_PASS_THRU_PRIVATE_DATA     *Private
  )
{
  EFI_STATUS             Status;
  UINTN                  Address;
  UINT32                 Data;

  //
  // Enable the UTP Task Management Request List by setting the UTP Task Management
  // Request List RunStop Register (UTMRLRSR) to '1'.
  //
  Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;  
  MmioWrite32 (Address, 0);

  //
  // Enable the UTP Transfer Request List by setting the UTP Transfer Request List
  // RunStop Register (UTRLRSR) to '1'.
  //
  Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;  
  MmioWrite32 (Address, 0);

  //
  // Write a 0 to the HCE register in order to disable the host controller.
  //
  Address = Private->UfsHcBase + UFS_HC_ENABLE_OFFSET;
  Data    = MmioRead32 (Address);
  ASSERT ((Data & UFS_HC_HCE_EN) == UFS_HC_HCE_EN);
  MmioWrite32 (Address, 0);

  //
  // Wait until HCE is read as '0' before continuing.
  //
  Status = UfsWaitMemSet (Address, UFS_HC_HCE_EN, 0, UFS_TIMEOUT);
  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }

  DEBUG ((EFI_D_INFO, "UfsController is stopped\n"));

  return EFI_SUCCESS;
}