/** @file
  Debug Library based on report status code library.

  Note that if the debug message length is larger than the maximum allowable
  record length, then the debug message will be ignored directly.

  Copyright (c) 2006 - 2009, Intel Corporation<BR>
  All rights reserved. This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <FrameworkPei.h>

#include <Guid/StatusCodeDataTypeId.h>
#include <Guid/StatusCodeDataTypeDebug.h>

#include <Library/DebugLib.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/ReportStatusCodeLib.h>
#include <Library/PcdLib.h>

/**
  Prints a debug message to the debug output device if the specified error level is enabled.

  If any bit in ErrorLevel is also set in PcdDebugPrintErrorLevel, then print 
  the message specified by Format and the associated variable argument list to 
  the debug output device.

  If Format is NULL, then ASSERT().

  If the length of the message string specificed by Format is larger than the maximum allowable
  record length, then directly return and not print it.

  @param  ErrorLevel  The error level of the debug message.
  @param  Format      Format string for the debug message to print.
  @param  ...         Variable argument list whose contents are accessed 
                      based on the format string specified by Format.

**/
VOID
EFIAPI
DebugPrint (
  IN  UINTN        ErrorLevel,
  IN  CONST CHAR8  *Format,
  ...
  )
{
  UINT64          Buffer[(EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof (UINT64)) + 1];
  EFI_DEBUG_INFO  *DebugInfo;
  UINTN           TotalSize;
  VA_LIST         VaListMarker;
  BASE_LIST       BaseListMarker;
  CHAR8           *FormatString;
  BOOLEAN         Long;

  //
  // If Format is NULL, then ASSERT().
  //
  ASSERT (Format != NULL);

  //
  // Check driver Debug Level value and global debug level
  //
  if ((ErrorLevel & PcdGet32 (PcdDebugPrintErrorLevel)) == 0) {
    return;
  }

  //
  // Compute the total size of the record.
  // Note that the passing-in format string and variable parameters will be constructed to 
  // the following layout:
  //
  //         Buffer->|------------------------|
  //                 |         Padding        | 4 bytes
  //      DebugInfo->|------------------------|
  //                 |      EFI_DEBUG_INFO    | sizeof(EFI_DEBUG_INFO)
  // BaseListMarker->|------------------------|
  //                 |           ...          |
  //                 |   variable arguments   | 12 * sizeof (UINT64)
  //                 |           ...          |
  //                 |------------------------|
  //                 |       Format String    |
  //                 |------------------------|<- (UINT8 *)Buffer + sizeof(Buffer)
  //
  TotalSize = 4 + sizeof (EFI_DEBUG_INFO) + 12 * sizeof (UINT64) + AsciiStrSize (Format);

  //
  // If the TotalSize is larger than the maximum record size, then return
  //
  if (TotalSize > sizeof (Buffer)) {
    return;
  }

  //
  // Fill in EFI_DEBUG_INFO
  //
  // Here we skip the first 4 bytes of Buffer, because we must ensure BaseListMarker is
  // 64-bit aligned, otherwise retrieving 64-bit parameter from BaseListMarker will cause
  // exception on IPF. Buffer starts at 64-bit aligned address, so skipping 4 types (sizeof(EFI_DEBUG_INFO))
  // just makes address of BaseListMarker, which follows DebugInfo, 64-bit aligned.
  //
  DebugInfo             = (EFI_DEBUG_INFO *)(Buffer) + 1;
  DebugInfo->ErrorLevel = (UINT32)ErrorLevel;
  BaseListMarker        = (BASE_LIST)(DebugInfo + 1);
  FormatString          = (CHAR8 *)((UINT64 *)(DebugInfo + 1) + 12);

  //
  // Copy the Format string into the record
  //
  AsciiStrCpy (FormatString, Format);

  //
  // The first 12 * sizeof (UINT64) bytes following EFI_DEBUG_INFO are for variable arguments
  // of format in DEBUG string, which is followed by the DEBUG format string.
  // Here we will process the variable arguments and pack them in this area.
  //
  VA_START (VaListMarker, Format);
  for (; *Format != '\0'; Format++) {
    //
    // Only format with prefix % is processed.
    //
    if (*Format != '%') {
      continue;
    }
    Long = FALSE;
    //
    // Parse Flags and Width
    //
    for (Format++; TRUE; Format++) {
      if (*Format == '.' || *Format == '-' || *Format == '+' || *Format == ' ') {
        //
        // These characters in format field are omitted.
        //
        continue;
      }
      if (*Format >= '0' && *Format <= '9') {
        //
        // These characters in format field are omitted.
        //
        continue;
      }
      if (*Format == 'L' || *Format == 'l') {
        //
        // 'L" or "l" in format field means the number being printed is a UINT64
        //
        Long = TRUE;
        continue;
      }
      if (*Format == '*') {
        //
        // '*' in format field means the precision of the field is specified by
        // a UINTN argument in the argument list.
        //
        BASE_ARG (BaseListMarker, UINTN) = VA_ARG (VaListMarker, UINTN);
        continue;
      }
      if (*Format == '\0') {
        //
        // Make no output if Format string terminates unexpectedly when
        // looking up for flag, width, precision and type. 
        //
        Format--;
      }
      //
      // When valid argument type detected or format string terminates unexpectedly,
      // the inner loop is done.
      //
      break;
    }
    
    //
    // Pack variable arguments into the storage area following EFI_DEBUG_INFO.
    //
    if ((*Format == 'p') && (sizeof (VOID *) > 4)) {
      Long = TRUE;
    }
    if (*Format == 'p' || *Format == 'X' || *Format == 'x' || *Format == 'd') {
      if (Long) {
        BASE_ARG (BaseListMarker, INT64) = VA_ARG (VaListMarker, INT64);
      } else {
        BASE_ARG (BaseListMarker, int) = VA_ARG (VaListMarker, int);
      }
    } else if (*Format == 's' || *Format == 'S' || *Format == 'a' || *Format == 'g' || *Format == 't') {
      BASE_ARG (BaseListMarker, VOID *) = VA_ARG (VaListMarker, VOID *);
    } else if (*Format == 'c') {
      BASE_ARG (BaseListMarker, UINTN) = VA_ARG (VaListMarker, UINTN);
    } else if (*Format == 'r') {
      BASE_ARG (BaseListMarker, RETURN_STATUS) = VA_ARG (VaListMarker, RETURN_STATUS);
    }

    //
    // If the converted BASE_LIST is larger than the 12 * sizeof (UINT64) allocated bytes, then ASSERT()
    // This indicates that the DEBUG() macro is passing in more argument than can be handled by 
    // the EFI_DEBUG_INFO record
    //
    ASSERT ((CHAR8 *)BaseListMarker <= FormatString);

    //
    // If the converted BASE_LIST is larger than the 12 * sizeof (UINT64) allocated bytes, then return
    //
    if ((CHAR8 *)BaseListMarker > FormatString) {
      return;
    }
  }
  VA_END (VaListMarker);

  //
  // Send the DebugInfo record
  //
  REPORT_STATUS_CODE_EX (
    EFI_DEBUG_CODE,
    (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_DC_UNSPECIFIED),
    0,
    NULL,
    &gEfiStatusCodeDataTypeDebugGuid,
    DebugInfo,
    TotalSize
    );
}

/**
  Prints an assert message containing a filename, line number, and description.  
  This may be followed by a breakpoint or a dead loop.

  Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"
  to the debug output device.  If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of 
  PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if 
  DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then 
  CpuDeadLoop() is called.  If neither of these bits are set, then this function 
  returns immediately after the message is printed to the debug output device.
  DebugAssert() must actively prevent recursion.  If DebugAssert() is called while
  processing another DebugAssert(), then DebugAssert() must return immediately.

  If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.
  If Description is NULL, then a <Description> string of "(NULL) Description" is printed.

  @param  FileName     Pointer to the name of the source file that generated the assert condition.
  @param  LineNumber   The line number in the source file that generated the assert condition
  @param  Description  Pointer to the description of the assert condition.

**/
VOID
EFIAPI
DebugAssert (
  IN CONST CHAR8  *FileName,
  IN UINTN        LineNumber,
  IN CONST CHAR8  *Description
  )
{
  UINT64                 Buffer[EFI_STATUS_CODE_DATA_MAX_SIZE / sizeof(UINT64)];
  EFI_DEBUG_ASSERT_DATA  *AssertData;
  UINTN                  TotalSize;
  CHAR8                  *Temp;
  UINTN                  FileNameSize;
  UINTN                  DescriptionSize;

  //
  // Make sure it will all fit in the passed in buffer
  //
  FileNameSize    = AsciiStrSize (FileName);
  DescriptionSize = AsciiStrSize (Description);
  TotalSize = sizeof (EFI_DEBUG_ASSERT_DATA) + FileNameSize + DescriptionSize;
  if (TotalSize <= sizeof (Buffer)) {
    //
    // Fill in EFI_DEBUG_ASSERT_DATA
    //
    AssertData = (EFI_DEBUG_ASSERT_DATA *)Buffer;
    AssertData->LineNumber = (UINT32)LineNumber;

    //
    // Copy Ascii FileName including NULL.
    //
    Temp = AsciiStrCpy ((CHAR8 *)(AssertData + 1), FileName);

    //
    // Copy Ascii Description
    //
    AsciiStrCpy (Temp + FileNameSize, Description);

    REPORT_STATUS_CODE_EX (
      (EFI_ERROR_CODE | EFI_ERROR_UNRECOVERED),
      (EFI_SOFTWARE_DXE_BS_DRIVER | EFI_SW_EC_ILLEGAL_SOFTWARE_STATE),
      0,
      NULL,
      NULL,
      AssertData,
      TotalSize
      );
  }

  //
  // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings
  //
  if ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {
    CpuBreakpoint ();
  } else if ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {
    CpuDeadLoop ();
  }
}


/**
  Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.

  This function fills Length bytes of Buffer with the value specified by 
  PcdDebugClearMemoryValue, and returns Buffer.

  If Buffer is NULL, then ASSERT().
  If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT(). 

  @param   Buffer  Pointer to the target buffer to be filled with PcdDebugClearMemoryValue.
  @param   Length  Number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue. 

  @return  Buffer  Pointer to the target buffer filled with PcdDebugClearMemoryValue.

**/
VOID *
EFIAPI
DebugClearMemory (
  OUT VOID  *Buffer,
  IN UINTN  Length
  )
{
  ASSERT (Buffer != NULL);

  return SetMem (Buffer, Length, PcdGet8 (PcdDebugClearMemoryValue));
}


/**
  Returns TRUE if ASSERT() macros are enabled.

  This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of 
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.

  @retval  TRUE    The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.
  @retval  FALSE   The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.

**/
BOOLEAN
EFIAPI
DebugAssertEnabled (
  VOID
  )
{
  return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);
}


/**  
  Returns TRUE if DEBUG() macros are enabled.

  This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of 
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.

  @retval  TRUE    The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.
  @retval  FALSE   The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.

**/
BOOLEAN
EFIAPI
DebugPrintEnabled (
  VOID
  )
{
  return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);
}


/**  
  Returns TRUE if DEBUG_CODE() macros are enabled.

  This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of 
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.

  @retval  TRUE    The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.
  @retval  FALSE   The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.

**/
BOOLEAN
EFIAPI
DebugCodeEnabled (
  VOID
  )
{
  return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);
}


/**  
  Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.

  This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of 
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.

  @retval  TRUE    The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.
  @retval  FALSE   The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.

**/
BOOLEAN
EFIAPI
DebugClearMemoryEnabled (
  VOID
  )
{
  return (BOOLEAN) ((PcdGet8 (PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);
}