/** @file
  Head file for BDS Architectural Protocol implementation

Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _BDS_MODULE_H_
#define _BDS_MODULE_H_

#include <FrameworkDxe.h>
#include <IndustryStandard/PeImage.h>
#include <Guid/MdeModuleHii.h>
#include <Guid/FileSystemVolumeLabelInfo.h>
#include <Guid/HiiPlatformSetupFormset.h>
#include <Guid/StatusCodeDataTypeVariable.h>
#include <Protocol/DevicePath.h>
#include <IndustryStandard/SmBios.h>
#include <Protocol/LoadFile.h>
#include <Guid/FileInfo.h>
#include <Protocol/HiiConfigRouting.h>
#include <Protocol/Bds.h>
#include <Protocol/Smbios.h>
#include <Protocol/UgaDraw.h>
#include <Protocol/BlockIo.h>
#include <Guid/GlobalVariable.h>
#include <Guid/CapsuleVendor.h>
#include <Guid/StatusCodeDataTypeId.h>
#include <Guid/LegacyDevOrder.h>
#include <Guid/BdsHii.h>
#include <Guid/ConnectConInEvent.h>
#include <Guid/Performance.h>
#include <Guid/FmpCapsule.h>
#include <Protocol/GenericMemoryTest.h>
#include <Protocol/FormBrowser2.h>
#include <Protocol/HiiConfigAccess.h>
#include <Protocol/GraphicsOutput.h>
#include <Protocol/SimpleFileSystem.h>
#include <Protocol/HiiDatabase.h>
#include <Protocol/HiiString.h>
#include <Protocol/SerialIo.h>
#include <Protocol/LegacyBios.h>
#include <Protocol/SimpleTextInEx.h>
#include <Protocol/DriverHealth.h>
#include <Protocol/BootLogo.h>
#include <Protocol/VariableLock.h>

#include <Library/UefiDriverEntryPoint.h>
#include <Library/PrintLib.h>
#include <Library/DebugLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/PerformanceLib.h>
#include <Library/ReportStatusCodeLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
#include <Library/HobLib.h>
#include <Library/BaseLib.h>
#include <Library/DevicePathLib.h>
#include <Library/PcdLib.h>
#include <Library/CapsuleLib.h>
#include <Library/HiiLib.h>
#include <Library/DevicePathLib.h>
#include <Library/UefiHiiServicesLib.h>

#include <Library/GenericBdsLib.h>
#include <Library/PlatformBdsLib.h>

#pragma pack(1)

///
/// HII specific Vendor Device Path definition.
///
typedef struct {
  VENDOR_DEVICE_PATH             VendorDevicePath;
  EFI_DEVICE_PATH_PROTOCOL       End;
} HII_VENDOR_DEVICE_PATH;

#pragma pack()

/**

  Show progress bar with title above it. It only works in Graphics mode.

  @param TitleForeground Foreground color for Title.
  @param TitleBackground Background color for Title.
  @param Title           Title above progress bar.
  @param ProgressColor   Progress bar color.
  @param Progress        Progress (0-100)
  @param PreviousValue   The previous value of the progress.

  @retval  EFI_STATUS       Success update the progress bar

**/
EFI_STATUS
PlatformBdsShowProgress (
  IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL TitleForeground,
  IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL TitleBackground,
  IN CHAR16                        *Title,
  IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL ProgressColor,
  IN UINTN                         Progress,
  IN UINTN                         PreviousValue
  );

//
// Prototypes
//

/**

  Install Boot Device Selection Protocol

  @param ImageHandle     The image handle.
  @param SystemTable     The system table.

  @retval  EFI_SUCEESS  BDS has finished initializing.
                        Return the dispatcher and recall BDS.Entry
  @retval  Other        Return status from AllocatePool() or gBS->InstallProtocolInterface

**/
EFI_STATUS
EFIAPI
BdsInitialize (
  IN EFI_HANDLE                     ImageHandle,
  IN EFI_SYSTEM_TABLE               *SystemTable
  );

/**

  Service routine for BdsInstance->Entry(). Devices are connected, the
  consoles are initialized, and the boot options are tried.

  @param This            Protocol Instance structure.

**/
VOID
EFIAPI
BdsEntry (
  IN  EFI_BDS_ARCH_PROTOCOL *This
  );


/**
  Perform the memory test base on the memory test intensive level,
  and update the memory resource.

  @param  Level         The memory test intensive level.

  @retval EFI_STATUS    Success test all the system memory and update
                        the memory resource

**/
EFI_STATUS
EFIAPI
BdsMemoryTest (
  IN EXTENDMEM_COVERAGE_LEVEL Level
  );

/**

  This routine is called to see if there are any capsules we need to process.
  If the boot mode is not UPDATE, then we do nothing. Otherwise find the
  capsule HOBS and produce firmware volumes for them via the DXE service.
  Then call the dispatcher to dispatch drivers from them. Finally, check
  the status of the updates.

  This function should be called by BDS in case we need to do some
  sort of processing even if there is no capsule to process. We
  need to do this if an earlier update went away and we need to
  clear the capsule variable so on the next reset PEI does not see it and
  think there is a capsule available.

  @param BootMode                 the current boot mode

  @retval EFI_INVALID_PARAMETER   boot mode is not correct for an update
  @retval EFI_SUCCESS             There is no error when processing capsule

**/
EFI_STATUS
EFIAPI
BdsProcessCapsules (
  EFI_BOOT_MODE BootMode
  );

/**
  Set the variable and report the error through status code upon failure.

  @param  VariableName           A Null-terminated string that is the name of the vendor's variable.
                                 Each VariableName is unique for each VendorGuid. VariableName must
                                 contain 1 or more characters. If VariableName is an empty string,
                                 then EFI_INVALID_PARAMETER is returned.
  @param  VendorGuid             A unique identifier for the vendor.
  @param  Attributes             Attributes bitmask to set for the variable.
  @param  DataSize               The size in bytes of the Data buffer. Unless the EFI_VARIABLE_APPEND_WRITE, 
                                 EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS, or 
                                 EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute is set, a size of zero 
                                 causes the variable to be deleted. When the EFI_VARIABLE_APPEND_WRITE attribute is 
                                 set, then a SetVariable() call with a DataSize of zero will not cause any change to 
                                 the variable value (the timestamp associated with the variable may be updated however 
                                 even if no new data value is provided,see the description of the 
                                 EFI_VARIABLE_AUTHENTICATION_2 descriptor below. In this case the DataSize will not 
                                 be zero since the EFI_VARIABLE_AUTHENTICATION_2 descriptor will be populated). 
  @param  Data                   The contents for the variable.

  @retval EFI_SUCCESS            The firmware has successfully stored the variable and its data as
                                 defined by the Attributes.
  @retval EFI_INVALID_PARAMETER  An invalid combination of attribute bits, name, and GUID was supplied, or the
                                 DataSize exceeds the maximum allowed.
  @retval EFI_INVALID_PARAMETER  VariableName is an empty string.
  @retval EFI_OUT_OF_RESOURCES   Not enough storage is available to hold the variable and its data.
  @retval EFI_DEVICE_ERROR       The variable could not be retrieved due to a hardware error.
  @retval EFI_WRITE_PROTECTED    The variable in question is read-only.
  @retval EFI_WRITE_PROTECTED    The variable in question cannot be deleted.
  @retval EFI_SECURITY_VIOLATION The variable could not be written due to EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 
                                 or EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACESS being set, but the AuthInfo 
                                 does NOT pass the validation check carried out by the firmware.

  @retval EFI_NOT_FOUND          The variable trying to be updated or deleted was not found.
**/
EFI_STATUS
BdsDxeSetVariableAndReportStatusCodeOnError (
  IN CHAR16     *VariableName,
  IN EFI_GUID   *VendorGuid,
  IN UINT32     Attributes,
  IN UINTN      DataSize,
  IN VOID       *Data
  );

#endif