======================================================================

                       CHANGES_SUMMARY.TXT

        A QUICK overview of changes from 1.33 in reverse order

  A summary of additions rather than bug fixes and minor code changes.

          Numbers refer to items in CHANGES_FROM_133*.TXT
             which may contain additional information.

                          DISCLAIMER

 The software and these notes are provided "as is".  They may include
 typographical or technical errors and their authors disclaims all
 liability of any kind or nature for damages due to error, fault,
 defect, or deficiency regardless of cause.  All warranties of any
 kind, either express or implied, including, but not limited to, the
 implied  warranties of merchantability and fitness for a particular
 purpose are disclaimed.

======================================================================

#258. You can specify a user-defined base class for your parser

    The base class must constructor must have a signature similar to
    that of ANTLRParser.

#253. Generation of block preamble (-preamble and -preamble_first)

    The antlr option -preamble causes antlr to insert the code
    BLOCK_PREAMBLE at the start of each rule and block.

    The antlr option -preamble_first is similar, but inserts the
    code BLOCK_PREAMBLE_FIRST(PreambleFirst_123) where the symbol
    PreambleFirst_123 is equivalent to the first set defined by
    the #FirstSetSymbol described in Item #248.

#248. Generate symbol for first set of an alternative

        rr : #FirstSetSymbol(rr_FirstSet)  ( Foo | Bar ) ;

#216. Defer token fetch for C++ mode

    When the ANTLRParser class is built with the pre-processor option 
    ZZDEFER_FETCH defined, the fetch of new tokens by consume() is deferred
    until LA(i) or LT(i) is called. 

#215. Use reset() to reset DLGLexerBase
#188. Added pccts/h/DLG_stream_input.h
#180. Added ANTLRParser::getEofToken()
#173. -glms for Microsoft style filenames with -gl
#170. Suppression for predicates with lookahead depth >1

      Consider the following grammar with -ck 2 and the predicate in rule
      "a" with depth 2:

            r1  : (ab)* "@"
                ;

            ab  : a
                | b
                ;

            a   : (A B)? => <<p(LATEXT(2))>>? A B C
                ;

            b   : A B C
                ;

      Normally, the predicate would be hoisted into rule r1 in order to
      determine whether to call rule "ab".  However it should *not* be
      hoisted because, even if p is false, there is a valid alternative
      in rule b.  With "-mrhoistk on" the predicate will be suppressed.

      If "-info p" command line option is present the following information
      will appear in the generated code:

                while ( (LA(1)==A)
        #if 0

        Part (or all) of predicate with depth > 1 suppressed by alternative
            without predicate

        pred  <<  p(LATEXT(2))>>?
                  depth=k=2  ("=>" guard)  rule a  line 8  t1.g
          tree context:
            (root = A
               B
            )

        The token sequence which is suppressed: ( A B )
        The sequence of references which generate that sequence of tokens:

           1 to ab          r1/1       line 1     t1.g
           2 ab             ab/1       line 4     t1.g
           3 to b           ab/2       line 5     t1.g
           4 b              b/1        line 11    t1.g
           5 #token A       b/1        line 11    t1.g
           6 #token B       b/1        line 11    t1.g

        #endif

      A slightly more complicated example:

            r1  : (ab)* "@"
                ;

            ab  : a
                | b
                ;

            a   : (A B)? => <<p(LATEXT(2))>>? (A  B | D E)
                ;

            b   : <<q(LATEXT(2))>>? D E
                ;


      In this case, the sequence (D E) in rule "a" which lies behind
      the guard is used to suppress the predicate with context (D E)
      in rule b.

                while ( (LA(1)==A || LA(1)==D)
            #if 0

            Part (or all) of predicate with depth > 1 suppressed by alternative
                without predicate

            pred  <<  q(LATEXT(2))>>?
                              depth=k=2  rule b  line 11  t2.g
              tree context:
                (root = D
                   E
                )

            The token sequence which is suppressed: ( D E )
            The sequence of references which generate that sequence of tokens:

               1 to ab          r1/1       line 1     t2.g
               2 ab             ab/1       line 4     t2.g
               3 to a           ab/1       line 4     t2.g
               4 a              a/1        line 8     t2.g
               5 #token D       a/1        line 8     t2.g
               6 #token E       a/1        line 8     t2.g

            #endif
            &&
            #if 0

            pred  <<  p(LATEXT(2))>>?
                              depth=k=2  ("=>" guard)  rule a  line 8  t2.g
              tree context:
                (root = A
                   B
                )

            #endif

            (! ( LA(1)==A && LA(2)==B ) || p(LATEXT(2)) )  {
                ab();
                ...

#165. (Changed in MR13) option -newAST

      To create ASTs from an ANTLRTokenPtr antlr usually calls
      "new AST(ANTLRTokenPtr)".  This option generates a call
      to "newAST(ANTLRTokenPtr)" instead.  This allows a user
      to define a parser member function to create an AST object.

#161. (Changed in MR13) Switch -gxt inhibits generation of tokens.h

#158. (Changed in MR13) #header causes problem for pre-processors

      A user who runs the C pre-processor on antlr source suggested
      that another syntax be allowed.  With MR13 such directives
      such as #header, #pragma, etc. may be written as "\#header",
      "\#pragma", etc.  For escaping pre-processor directives inside
      a #header use something like the following:

            \#header
            <<
                \#include <stdio.h>
            >>

#155. (Changed in MR13) Context behind predicates can suppress

      With -mrhoist enabled the context behind a guarded predicate can
      be used to suppress other predicates.  Consider the following grammar:

        r0 : (r1)+;

        r1  : rp
            | rq
            ;
        rp  : <<p LATEXT(1)>>? B ;
        rq : (A)? => <<q LATEXT(1)>>? (A|B);

      In earlier versions both predicates "p" and "q" would be hoisted into
      rule r0. With MR12c predicate p is suppressed because the context which
      follows predicate q includes "B" which can "cover" predicate "p".  In
      other words, in trying to decide in r0 whether to call r1, it doesn't
      really matter whether p is false or true because, either way, there is
      a valid choice within r1.

#154. (Changed in MR13) Making hoist suppression explicit using <<nohoist>>

      A common error, even among experienced pccts users, is to code
      an init-action to inhibit hoisting rather than a leading action.
      An init-action does not inhibit hoisting.

      This was coded:

        rule1 : <<;>> rule2

      This is what was meant:

        rule1 : <<;>> <<;>> rule2

      With MR13, the user can code:

        rule1 : <<;>> <<nohoist>> rule2

      The following will give an error message:

        rule1 : <<nohoist>> rule2

      If the <<nohoist>> appears as an init-action rather than a leading
      action an error message is issued.  The meaning of an init-action
      containing "nohoist" is unclear: does it apply to just one
      alternative or to all alternatives ?

#151a. Addition of ANTLRParser::getLexer(), ANTLRTokenStream::getLexer()

      You must manually cast the ANTLRTokenStream to your program's
      lexer class. Because the name of the lexer's class is not fixed.
      Thus it is impossible to incorporate it into the DLGLexerBase
      class.

#151b.(Changed in MR12) ParserBlackBox member getLexer()

#150. (Changed in MR12) syntaxErrCount and lexErrCount now public

#149. (Changed in MR12) antlr option -info o (letter o for orphan)

      If there is more than one rule which is not referenced by any
      other rule then all such rules are listed.  This is useful for
      alerting one to rules which are not used, but which can still
      contribute to ambiguity.

#148. (Changed in MR11) #token names appearing in zztokens,token_tbl

      One can write:

            #token Plus ("+")             "\+"
            #token RP   ("(")             "\("
            #token COM  ("comment begin") "/\*"

      The string in parenthesis will be used in syntax error messages.

#146. (Changed in MR11) Option -treport for locating "difficult" alts

      It can be difficult to determine which alternatives are causing
      pccts to work hard to resolve an ambiguity.  In some cases the
      ambiguity is successfully resolved after much CPU time so there
      is no message at all.

      A rough measure of the amount of work being peformed which is
      independent of the CPU speed and system load is the number of
      tnodes created.  Using "-info t" gives information about the
      total number of tnodes created and the peak number of tnodes.

        Tree Nodes:  peak 1300k  created 1416k  lost 0

      It also puts in the generated C or C++ file the number of tnodes
      created for a rule (at the end of the rule).  However this
      information is not sufficient to locate the alternatives within
      a rule which are causing the creation of tnodes.

      Using:

             antlr -treport 100000 ....

      causes antlr to list on stdout any alternatives which require the
      creation of more than 100,000 tnodes, along with the lookahead sets
      for those alternatives.

      The following is a trivial case from the ansi.g grammar which shows
      the format of the report.  This report might be of more interest
      in cases where 1,000,000 tuples were created to resolve the ambiguity.

      -------------------------------------------------------------------------
        There were 0 tuples whose ambiguity could not be resolved
             by full lookahead
        There were 157 tnodes created to resolve ambiguity between:

          Choice 1: statement/2  line 475  file ansi.g
          Choice 2: statement/3  line 476  file ansi.g

            Intersection of lookahead[1] sets:

               IDENTIFIER

            Intersection of lookahead[2] sets:

               LPARENTHESIS     COLON            AMPERSAND        MINUS
               STAR             PLUSPLUS         MINUSMINUS       ONESCOMPLEMENT
               NOT              SIZEOF           OCTALINT         DECIMALINT
               HEXADECIMALINT   FLOATONE         FLOATTWO         IDENTIFIER
               STRING           CHARACTER
      -------------------------------------------------------------------------

#143. (Changed in MR11) Optional ";" at end of #token statement

      Fixes problem of:

            #token X "x"

            <<
                parser action
            >>

      Being confused with:

            #token X "x" <<lexical action>>

#142. (Changed in MR11) class BufFileInput subclass of DLGInputStream

      Alexey Demakov (demakov@kazbek.ispras.ru) has supplied class
      BufFileInput derived from DLGInputStream which provides a
      function lookahead(char *string) to test characters in the
      input stream more than one character ahead.
      The class is located in pccts/h/BufFileInput.* of the kit.

#140. #pred to define predicates

      +---------------------------------------------------+
      | Note: Assume "-prc on" for this entire discussion |
      +---------------------------------------------------+

      A problem with predicates is that each one is regarded as
      unique and capable of disambiguating cases where two
      alternatives have identical lookahead.  For example:

        rule : <<pred(LATEXT(1))>>? A
             | <<pred(LATEXT(1))>>? A
             ;

      will not cause any error messages or warnings to be issued
      by earlier versions of pccts.  To compare the text of the
      predicates is an incomplete solution.

      In 1.33MR11 I am introducing the #pred statement in order to
      solve some problems with predicates.  The #pred statement allows
      one to give a symbolic name to a "predicate literal" or a
      "predicate expression" in order to refer to it in other predicate
      expressions or in the rules of the grammar.

      The predicate literal associated with a predicate symbol is C
      or C++ code which can be used to test the condition.  A
      predicate expression defines a predicate symbol in terms of other
      predicate symbols using "!", "&&", and "||".  A predicate symbol
      can be defined in terms of a predicate literal, a predicate
      expression, or *both*.

      When a predicate symbol is defined with both a predicate literal
      and a predicate expression, the predicate literal is used to generate
      code, but the predicate expression is used to check for two
      alternatives with identical predicates in both alternatives.

      Here are some examples of #pred statements:

        #pred  IsLabel       <<isLabel(LATEXT(1))>>?
        #pred  IsLocalVar    <<isLocalVar(LATEXT(1))>>?
        #pred  IsGlobalVar   <<isGlobalVar(LATEXT(1)>>?
        #pred  IsVar         <<isVar(LATEXT(1))>>?       IsLocalVar || IsGlobalVar
        #pred  IsScoped      <<isScoped(LATEXT(1))>>?    IsLabel || IsLocalVar

      I hope that the use of EBNF notation to describe the syntax of the
      #pred statement will not cause problems for my readers (joke).

        predStatement : "#pred"
                            CapitalizedName
                              (
                                  "<<predicate_literal>>?"
                                | "<<predicate_literal>>?"  predOrExpr
                                | predOrExpr
                              )
                      ;

        predOrExpr    : predAndExpr ( "||" predAndExpr ) * ;

        predAndExpr   : predPrimary ( "&&" predPrimary ) * ;

        predPrimary   : CapitalizedName
                      | "!" predPrimary
                      | "(" predOrExpr ")"
                      ;

      What is the purpose of this nonsense ?

      To understand how predicate symbols help, you need to realize that
      predicate symbols are used in two different ways with two different
      goals.

        a. Allow simplification of predicates which have been combined
           during predicate hoisting.

        b. Allow recognition of identical predicates which can't disambiguate
           alternatives with common lookahead.

      First we will discuss goal (a).  Consider the following rule:

            rule0: rule1
                 | ID
                 | ...
                 ;

            rule1: rule2
                 | rule3
                 ;

            rule2: <<isX(LATEXT(1))>>? ID ;
            rule3: <<!isX(LATEXT(1)>>? ID ;

      When the predicates in rule2 and rule3 are combined by hoisting
      to create a prediction expression for rule1 the result is:

            if ( LA(1)==ID
                && ( isX(LATEXT(1) || !isX(LATEXT(1) ) ) { rule1(); ...

      This is inefficient, but more importantly, can lead to false
      assumptions that the predicate expression distinguishes the rule1
      alternative with some other alternative with lookahead ID.  In
      MR11 one can write:

            #pred IsX     <<isX(LATEXT(1))>>?

            ...

            rule2: <<IsX>>? ID  ;
            rule3: <<!IsX>>? ID ;

      During hoisting MR11 recognizes this as a special case and
      eliminates the predicates.  The result is a prediction
      expression like the following:

            if ( LA(1)==ID ) { rule1(); ...

      Please note that the following cases which appear to be equivalent
      *cannot* be simplified by MR11 during hoisting because the hoisting
      logic only checks for a "!" in the predicate action, not in the
      predicate expression for a predicate symbol.

        *Not* equivalent and is not simplified during hoisting:

            #pred IsX      <<isX(LATEXT(1))>>?
            #pred NotX     <<!isX(LATEXT(1))>>?
            ...
            rule2: <<IsX>>? ID  ;
            rule3: <<NotX>>? ID ;

        *Not* equivalent and is not simplified during hoisting:

            #pred IsX      <<isX(LATEXT(1))>>?
            #pred NotX     !IsX
            ...
            rule2: <<IsX>>? ID  ;
            rule3: <<NotX>>? ID ;

      Now we will discuss goal (b).

      When antlr discovers that there is a lookahead ambiguity between
      two alternatives it attempts to resolve the ambiguity by searching
      for predicates in both alternatives.  In the past any predicate
      would do, even if the same one appeared in both alternatives:

            rule: <<p(LATEXT(1))>>? X
                | <<p(LATEXT(1))>>? X
                ;

      The #pred statement is a start towards solving this problem.
      During ambiguity resolution (*not* predicate hoisting) the
      predicates for the two alternatives are expanded and compared.
      Consider the following example:

            #pred Upper     <<isUpper(LATEXT(1))>>?
            #pred Lower     <<isLower(LATEXT(1))>>?
            #pred Alpha     <<isAlpha(LATEXT(1))>>?  Upper || Lower

            rule0: rule1
                 | <<Alpha>>? ID
                 ;

            rule1:
                 | rule2
                 | rule3
                 ...
                 ;

            rule2: <<Upper>>? ID;
            rule3: <<Lower>>? ID;

      The definition of #pred Alpha expresses:

            a. to test the predicate use the C code "isAlpha(LATEXT(1))"

            b. to analyze the predicate use the information that
               Alpha is equivalent to the union of Upper and Lower,

      During ambiguity resolution the definition of Alpha is expanded
      into "Upper || Lower" and compared with the predicate in the other
      alternative, which is also "Upper || Lower".  Because they are
      identical MR11 will report a problem.

    -------------------------------------------------------------------------
      t10.g, line 5: warning: the predicates used to disambiguate rule rule0
             (file t10.g alt 1 line 5 and alt 2 line 6)
             are identical when compared without context and may have no
             resolving power for some lookahead sequences.
    -------------------------------------------------------------------------

      If you use the "-info p" option the output file will contain:

    +----------------------------------------------------------------------+
    |#if 0                                                                 |
    |                                                                      |
    |The following predicates are identical when compared without          |
    |  lookahead context information.  For some ambiguous lookahead        |
    |  sequences they may not have any power to resolve the ambiguity.     |
    |                                                                      |
    |Choice 1: rule0/1  alt 1  line 5  file t10.g                          |
    |                                                                      |
    |  The original predicate for choice 1 with available context          |
    |    information:                                                      |
    |                                                                      |
    |    OR expr                                                           |
    |                                                                      |
    |      pred  <<  Upper>>?                                              |
    |                        depth=k=1  rule rule2  line 14  t10.g         |
    |        set context:                                                  |
    |           ID                                                         |
    |                                                                      |
    |      pred  <<  Lower>>?                                              |
    |                        depth=k=1  rule rule3  line 15  t10.g         |
    |        set context:                                                  |
    |           ID                                                         |
    |                                                                      |
    |  The predicate for choice 1 after expansion (but without context     |
    |    information):                                                     |
    |                                                                      |
    |    OR expr                                                           |
    |                                                                      |
    |      pred  <<  isUpper(LATEXT(1))>>?                                 |
    |                        depth=k=1  rule   line 1  t10.g               |
    |                                                                      |
    |      pred  <<  isLower(LATEXT(1))>>?                                 |
    |                        depth=k=1  rule   line 2  t10.g               |
    |                                                                      |
    |                                                                      |
    |Choice 2: rule0/2  alt 2  line 6  file t10.g                          |
    |                                                                      |
    |  The original predicate for choice 2 with available context          |
    |    information:                                                      |
    |                                                                      |
    |  pred  <<  Alpha>>?                                                  |
    |                    depth=k=1  rule rule0  line 6  t10.g              |
    |    set context:                                                      |
    |       ID                                                             |
    |                                                                      |
    |  The predicate for choice 2 after expansion (but without context     |
    |    information):                                                     |
    |                                                                      |
    |  OR expr                                                             |
    |                                                                      |
    |    pred  <<  isUpper(LATEXT(1))>>?                                   |
    |                      depth=k=1  rule   line 1  t10.g                 |
    |                                                                      |
    |    pred  <<  isLower(LATEXT(1))>>?                                   |
    |                      depth=k=1  rule   line 2  t10.g                 |
    |                                                                      |
    |                                                                      |
    |#endif                                                                |
    +----------------------------------------------------------------------+

      The comparison of the predicates for the two alternatives takes
      place without context information, which means that in some cases
      the predicates will be considered identical even though they operate
      on disjoint lookahead sets.  Consider:

            #pred Alpha

            rule1: <<Alpha>>? ID
                 | <<Alpha>>? Label
                 ;

      Because the comparison of predicates takes place without context
      these will be considered identical.  The reason for comparing
      without context is that otherwise it would be necessary to re-evaluate
      the entire predicate expression for each possible lookahead sequence.
      This would require more code to be written and more CPU time during
      grammar analysis, and it is not yet clear whether anyone will even make
      use of the new #pred facility.

      A temporary workaround might be to use different #pred statements
      for predicates you know have different context.  This would avoid
      extraneous warnings.

      The above example might be termed a "false positive".  Comparison
      without context will also lead to "false negatives".  Consider the
      following example:

            #pred Alpha
            #pred Beta

            rule1: <<Alpha>>? A
                 | rule2
                 ;

            rule2: <<Alpha>>? A
                 | <<Beta>>?  B
                 ;

      The predicate used for alt 2 of rule1 is (Alpha || Beta).  This
      appears to be different than the predicate Alpha used for alt1.
      However, the context of Beta is B.  Thus when the lookahead is A
      Beta will have no resolving power and Alpha will be used for both
      alternatives.  Using the same predicate for both alternatives isn't
      very helpful, but this will not be detected with 1.33MR11.

      To properly handle this the predicate expression would have to be
      evaluated for each distinct lookahead context.

      To determine whether two predicate expressions are identical is
      difficult.  The routine may fail to identify identical predicates.

      The #pred feature also compares predicates to see if a choice between
      alternatives which is resolved by a predicate which makes the second
      choice unreachable.  Consider the following example:

            #pred A         <<A(LATEXT(1)>>?
            #pred B         <<B(LATEXT(1)>>?
            #pred A_or_B    A || B

            r   : s
                | t
                ;
            s   : <<A_or_B>>? ID
                ;
            t   : <<A>>? ID
                ;

        ----------------------------------------------------------------------------
        t11.g, line 5: warning: the predicate used to disambiguate the
               first choice of  rule r
             (file t11.g alt 1 line 5 and alt 2 line 6)
             appears to "cover" the second predicate when compared without context.
             The second predicate may have no resolving power for some lookahead
               sequences.
        ----------------------------------------------------------------------------

#132. (Changed in 1.33MR11) Recognition of identical predicates in alts

      Prior to 1.33MR11, there would be no ambiguity warning when the
      very same predicate was used to disambiguate both alternatives:

        test: ref B
            | ref C
            ;

        ref : <<pred(LATEXT(1)>>? A

      In 1.33MR11 this will cause the warning:

        warning: the predicates used to disambiguate rule test
            (file v98.g alt 1 line 1 and alt 2 line 2)
             are identical and have no resolving power

        -----------------  Note  -----------------

          This is different than the following case

                test: <<pred(LATEXT(1))>>? A B
                    | <<pred(LATEXT(1)>>?  A C
                    ;

          In this case there are two distinct predicates
          which have exactly the same text.  In the first
          example there are two references to the same
          predicate.  The problem represented by this
          grammar will be addressed later.


#127. (Changed in 1.33MR11)

                    Count Syntax Errors     Count DLG Errors
                    -------------------     ----------------

       C++ mode     ANTLRParser::           DLGLexerBase::
                      syntaxErrCount          lexErrCount
       C mode       zzSyntaxErrCount        zzLexErrCount

       The C mode variables are global and initialized to 0.
       They are *not* reset to 0 automatically when antlr is
       restarted.

       The C++ mode variables are public.  They are initialized
       to 0 by the constructors.  They are *not* reset to 0 by the
       ANTLRParser::init() method.

       Suggested by Reinier van den Born (reinier@vnet.ibm.com).

#126. (Changed in 1.33MR11) Addition of #first <<...>>

       The #first <<...>> inserts the specified text in the output
       files before any other #include statements required by pccts.
       The only things before the #first text are comments and
       a #define ANTLR_VERSION.

       Requested by  and Esa Pulkkinen (esap@cs.tut.fi) and Alexin
       Zoltan (alexin@inf.u-szeged.hu).

#124. A Note on the New "&&" Style Guarded Predicates

        I've been asked several times, "What is the difference between
        the old "=>" style guard predicates and the new style "&&" guard
        predicates, and how do you choose one over the other" ?

        The main difference is that the "=>" does not apply the
        predicate if the context guard doesn't match, whereas
        the && form always does.  What is the significance ?

        If you have a predicate which is not on the "leading edge"
        it is cannot be hoisted.  Suppose you need a predicate that
        looks at LA(2).  You must introduce it manually.  The
        classic example is:

            castExpr :
                     LP typeName RP
                     | ....
                     ;

            typeName : <<isTypeName(LATEXT(1))>>?  ID
                     | STRUCT ID
                     ;

        The problem  is that isTypeName() isn't on the leading edge
        of typeName, so it won't be hoisted into castExpr to help
        make a decision on which production to choose.

        The *first* attempt to fix it is this:

            castExpr :
                     <<isTypeName(LATEXT(2))>>?
                                        LP typeName RP
                     | ....
                     ;

        Unfortunately, this won't work because it ignores
        the problem of STRUCT.  The solution is to apply
        isTypeName() in castExpr if LA(2) is an ID and
        don't apply it when LA(2) is STRUCT:

            castExpr :
                     (LP ID)? => <<isTypeName(LATEXT(2))>>?
                                        LP typeName RP
                     | ....
                     ;

        In conclusion, the "=>" style guarded predicate is
        useful when:

            a. the tokens required for the predicate
               are not on the leading edge
            b. there are alternatives in the expression
               selected by the predicate for which the
               predicate is inappropriate

        If (b) were false, then one could use a simple
        predicate (assuming "-prc on"):

            castExpr :
                     <<isTypeName(LATEXT(2))>>?
                                        LP typeName RP
                     | ....
                     ;

            typeName : <<isTypeName(LATEXT(1))>>?  ID
                     ;

        So, when do you use the "&&" style guarded predicate ?

        The new-style "&&" predicate should always be used with
        predicate context.  The context guard is in ADDITION to
        the automatically computed context.  Thus it useful for
        predicates which depend on the token type for reasons
        other than context.

        The following example is contributed by Reinier van den Born
        (reinier@vnet.ibm.com).

 +-------------------------------------------------------------------------+
 | This grammar has two ways to call functions:                            |
 |                                                                         |
 |  - a "standard" call syntax with parens and comma separated args        |
 |  - a shell command like syntax (no parens and spacing separated args)   |
 |                                                                         |
 | The former also allows a variable to hold the name of the function,     |
 | the latter can also be used to call external commands.                  |
 |                                                                         |
 | The grammar (simplified) looks like this:                               |
 |                                                                         |
 |   fun_call   :     ID "(" { expr ("," expr)* } ")"                      |
 |                                  /* ID is function name */              |
 |              | "@" ID "(" { expr ("," expr)* } ")"                      |
 |                                  /* ID is var containing fun name */    |
 |              ;                                                          |
 |                                                                         |
 |   command    : ID expr*          /* ID is function name */              |
 |              | path expr*        /* path is external command name */    |
 |              ;                                                          |
 |                                                                         |
 |   path       : ID                /* left out slashes and such */        |
 |              | "@" ID            /* ID is environment var */            |
 |              ;                                                          |
 |                                                                         |
 |   expr       : ....                                                     |
 |              | "(" expr ")";                                            |
 |                                                                         |
 |   call       : fun_call                                                 |
 |              | command                                                  |
 |              ;                                                          |
 |                                                                         |
 | Obviously the call is wildly ambiguous. This is more or less how this   |
 | is to be resolved:                                                      |
 |                                                                         |
 |    A call begins with an ID or an @ followed by an ID.                  |
 |                                                                         |
 |    If it is an ID and if it is an ext. command name  -> command         |
 |                       if followed by a paren         -> fun_call        |
 |                       otherwise                      -> command         |
 |                                                                         |
 |    If it is an @  and if the ID is a var name        -> fun_call        |
 |                       otherwise                      -> command         |
 |                                                                         |
 | One can implement these rules quite neatly using && predicates:         |
 |                                                                         |
 |   call       : ("@" ID)? && <<isVarName(LT(2))>>? fun_call              |
 |              | (ID)?     && <<isExtCmdName>>?     command               |
 |              | (ID "(")?                          fun_call              |
 |              |                                    command               |
 |              ;                                                          |
 |                                                                         |
 | This can be done better, so it is not an ideal example, but it          |
 | conveys the principle.                                                  |
 +-------------------------------------------------------------------------+

#122. (Changed in 1.33MR11)  Member functions to reset DLG in C++ mode

         void DLGFileReset(FILE *f) { input = f; found_eof = 0; }
         void DLGStringReset(DLGChar *s) { input = s; p = &input[0]; }

        Supplied by R.A. Nelson (cowboy@VNET.IBM.COM)

#119. (Changed in 1.33MR11) Ambiguity aid for grammars

      The user can ask for additional information on ambiguities reported
      by antlr to stdout.  At the moment, only one ambiguity report can
      be created in an antlr run.

      This feature is enabled using the "-aa" (Ambiguity Aid)  option.

      The following options control the reporting of ambiguities:

          -aa ruleName       Selects reporting by name of rule
          -aa lineNumber     Selects reporting by line number
                               (file name not compared)

          -aam               Selects "multiple" reporting for a token
                             in the intersection set of the
                             alternatives.

                             For instance, the token ID may appear dozens
                             of times in various paths as the program
                             explores the rules which are reachable from
                             the point of an ambiguity. With option -aam
                             every possible path the search program
                             encounters is reported.

                             Without -aam only the first encounter is
                             reported.  This may result in incomplete
                             information, but the information may be
                             sufficient and much shorter.

          -aad depth         Selects the depth of the search.
                             The default value is 1.

                             The number of paths to be searched, and the
                             size of the report can grow geometrically
                             with the -ck value if a full search for all
                             contributions to the source of the ambiguity
                             is explored.

                             The depth represents the number of tokens
                             in the lookahead set which are matched against
                             the set of ambiguous tokens.  A depth of 1
                             means that the search stops when a lookahead
                             sequence of just one token is matched.

                             A k=1 ck=6 grammar might generate 5,000 items
                             in a report if a full depth 6 search is made
                             with the Ambiguity Aid.  The source of the
                             problem may be in the first token and obscured
                             by the volume of data - I hesitate to call
                             it information.

                             When the user selects a depth > 1, the search
                             is first performed at depth=1 for both
                             alternatives, then depth=2 for both alternatives,
                             etc.

      Sample output for rule grammar in antlr.g itself:

  +---------------------------------------------------------------------+
  | Ambiguity Aid                                                       |
  |                                                                     |
  |   Choice 1: grammar/70                 line 632  file a.g           |
  |   Choice 2: grammar/82                 line 644  file a.g           |
  |                                                                     |
  |   Intersection of lookahead[1] sets:                                |
  |                                                                     |
  |      "\}"             "class"          "#errclass"      "#tokclass" |
  |                                                                     |
  |    Choice:1  Depth:1  Group:1  ("#errclass")                        |
  |  1 in (...)* block                grammar/70       line 632   a.g   |
  |  2 to error                       grammar/73       line 635   a.g   |
  |  3 error                          error/1          line 894   a.g   |
  |  4 #token "#errclass"             error/2          line 895   a.g   |
  |                                                                     |
  |    Choice:1  Depth:1  Group:2  ("#tokclass")                        |
  |  2 to tclass                      grammar/74       line 636   a.g   |
  |  3 tclass                         tclass/1         line 937   a.g   |
  |  4 #token "#tokclass"             tclass/2         line 938   a.g   |
  |                                                                     |
  |    Choice:1  Depth:1  Group:3  ("class")                            |
  |  2 to class_def                   grammar/75       line 637   a.g   |
  |  3 class_def                      class_def/1      line 669   a.g   |
  |  4 #token "class"                 class_def/3      line 671   a.g   |
  |                                                                     |
  |    Choice:1  Depth:1  Group:4  ("\}")                               |
  |  2 #token "\}"                    grammar/76       line 638   a.g   |
  |                                                                     |
  |    Choice:2  Depth:1  Group:5  ("#errclass")                        |
  |  1 in (...)* block                grammar/83       line 645   a.g   |
  |  2 to error                       grammar/93       line 655   a.g   |
  |  3 error                          error/1          line 894   a.g   |
  |  4 #token "#errclass"             error/2          line 895   a.g   |
  |                                                                     |
  |    Choice:2  Depth:1  Group:6  ("#tokclass")                        |
  |  2 to tclass                      grammar/94       line 656   a.g   |
  |  3 tclass                         tclass/1         line 937   a.g   |
  |  4 #token "#tokclass"             tclass/2         line 938   a.g   |
  |                                                                     |
  |    Choice:2  Depth:1  Group:7  ("class")                            |
  |  2 to class_def                   grammar/95       line 657   a.g   |
  |  3 class_def                      class_def/1      line 669   a.g   |
  |  4 #token "class"                 class_def/3      line 671   a.g   |
  |                                                                     |
  |    Choice:2  Depth:1  Group:8  ("\}")                               |
  |  2 #token "\}"                    grammar/96       line 658   a.g   |
  +---------------------------------------------------------------------+

      For a linear lookahead set ambiguity (where k=1 or for k>1 but
      when all lookahead sets [i] with i<k all have degree one) the
      reports appear in the following order:

        for (depth=1 ; depth <= "-aad depth" ; depth++) {
          for (alternative=1; alternative <=2 ; alternative++) {
            while (matches-are-found) {
              group++;
              print-report
            };
          };
       };

      For reporting a k-tuple ambiguity, the reports appear in the
      following order:

        for (depth=1 ; depth <= "-aad depth" ; depth++) {
          while (matches-are-found) {
            for (alternative=1; alternative <=2 ; alternative++) {
              group++;
              print-report
            };
          };
       };

      This is because matches are generated in different ways for
      linear lookahead and k-tuples.

#117. (Changed in 1.33MR10) new EXPERIMENTAL predicate hoisting code

      The hoisting of predicates into rules to create prediction
      expressions is a problem in antlr.  Consider the following
      example (k=1 with -prc on):

        start   : (a)* "@" ;
        a       : b | c ;
        b       : <<isUpper(LATEXT(1))>>? A ;
        c       : A ;

      Prior to 1.33MR10 the code generated for "start" would resemble:

        while {
            if (LA(1)==A &&
                    (!LA(1)==A || isUpper())) {
              a();
            }
        };

      This code is wrong because it makes rule "c" unreachable from
      "start".  The essence of the problem is that antlr fails to
      recognize that there can be a valid alternative within "a" even
      when the predicate <<isUpper(LATEXT(1))>>? is false.

      In 1.33MR10 with -mrhoist the hoisting of the predicate into
      "start" is suppressed because it recognizes that "c" can
      cover all the cases where the predicate is false:

        while {
            if (LA(1)==A) {
              a();
            }
        };

      With the antlr "-info p" switch the user will receive information
      about the predicate suppression in the generated file:

      --------------------------------------------------------------
        #if 0

        Hoisting of predicate suppressed by alternative without predicate.
        The alt without the predicate includes all cases where
            the predicate is false.

           WITH predicate: line 7  v1.g
           WITHOUT predicate: line 7  v1.g

        The context set for the predicate:

             A

        The lookahead set for the alt WITHOUT the semantic predicate:

             A

        The predicate:

          pred <<  isUpper(LATEXT(1))>>?
                          depth=k=1  rule b  line 9  v1.g
            set context:
               A
            tree context: null

        Chain of referenced rules:

            #0  in rule start (line 5 v1.g) to rule a
            #1  in rule a (line 7 v1.g)

        #endif
      --------------------------------------------------------------

      A predicate can be suppressed by a combination of alternatives
      which, taken together, cover a predicate:

        start   : (a)* "@" ;

        a       : b | ca | cb | cc ;

        b       : <<isUpper(LATEXT(1))>>? ( A | B | C ) ;

        ca      : A ;
        cb      : B ;
        cc      : C ;

      Consider a more complex example in which "c" covers only part of
      a predicate:

        start   : (a)* "@" ;

        a       : b
                | c
                ;

        b       : <<isUpper(LATEXT(1))>>?
                    ( A
                    | X
                    );

        c       : A
                ;

      Prior to 1.33MR10 the code generated for "start" would resemble:

        while {
            if ( (LA(1)==A || LA(1)==X) &&
                    (! (LA(1)==A || LA(1)==X) || isUpper()) {
              a();
            }
        };

      With 1.33MR10 and -mrhoist the predicate context is restricted to
      the non-covered lookahead.  The code resembles:

        while {
            if ( (LA(1)==A || LA(1)==X) &&
                  (! (LA(1)==X) || isUpper()) {
              a();
            }
        };

      With the antlr "-info p" switch the user will receive information
      about the predicate restriction in the generated file:

      --------------------------------------------------------------
        #if 0

        Restricting the context of a predicate because of overlap
          in the lookahead set between the alternative with the
          semantic predicate and one without
        Without this restriction the alternative without the predicate
          could not be reached when input matched the context of the
          predicate and the predicate was false.

           WITH predicate: line 11  v4.g
           WITHOUT predicate: line 12  v4.g

        The original context set for the predicate:

             A                X

        The lookahead set for the alt WITHOUT the semantic predicate:

             A

        The intersection of the two sets

             A

        The original predicate:

          pred <<  isUpper(LATEXT(1))>>?
                          depth=k=1  rule b  line 15  v4.g
            set context:
               A                X
            tree context: null

        The new (modified) form of the predicate:

          pred <<  isUpper(LATEXT(1))>>?
                          depth=k=1  rule b  line 15  v4.g
            set context:
               X
            tree context: null

        #endif
      --------------------------------------------------------------

      The bad news about -mrhoist:

        (a) -mrhoist does not analyze predicates with lookahead
            depth > 1.

        (b) -mrhoist does not look past a guarded predicate to
            find context which might cover other predicates.

      For these cases you might want to use syntactic predicates.
      When a semantic predicate fails during guess mode the guess
      fails and the next alternative is tried.

      Limitation (a) is illustrated by the following example:

        start    : (stmt)* EOF ;

        stmt     : cast
                 | expr
                 ;
        cast     : <<isTypename(LATEXT(2))>>? LP ID RP ;

        expr     : LP ID RP ;

      This is not much different from the first example, except that
      it requires two tokens of lookahead context to determine what
      to do.  This predicate is NOT suppressed because the current version
      is unable to handle predicates with depth > 1.

      A predicate can be combined with other predicates during hoisting.
      In those cases the depth=1 predicates are still handled.  Thus,
      in the following example the isUpper() predicate will be suppressed
      by line #4 when hoisted from "bizarre" into "start", but will still
      be present in "bizarre" in order to predict "stmt".

        start    : (bizarre)* EOF ;     // #1
                                        // #2
        bizarre  : stmt                 // #3
                 | A                    // #4
                 ;

        stmt     : cast
                 | expr
                 ;

        cast     : <<isTypename(LATEXT(2))>>? LP ID RP ;

        expr     : LP ID RP ;
                 | <<isUpper(LATEXT(1))>>? A

      Limitation (b) is illustrated by the following example of a
      context guarded predicate:

        rule : (A)? <<p>>?          // #1
                     (A             // #2
                     |B             // #3
                     )              // #4
             | <<q>> B              // #5
             ;

      Recall that this means that when the lookahead is NOT A then
      the predicate "p" is ignored and it attempts to match "A|B".
      Ideally, the "B" at line #3 should suppress predicate "q".
      However, the current version does not attempt to look past
      the guard predicate to find context which might suppress other
      predicates.

      In some cases -mrhoist will lead to the reporting of ambiguities
      which were not visible before:

        start   : (a)* "@";
        a       : bc | d;
        bc      : b  | c ;

        b       : <<isUpper(LATEXT(1))>>? A;
        c       : A ;

        d       : A ;

      In this case there is a true ambiguity in "a" between "bc" and "d"
      which can both match "A".  Without -mrhoist the predicate in "b"
      is hoisted into "a" and there is no ambiguity reported.  However,
      with -mrhoist, the predicate in "b" is suppressed by "c" (as it
      should be) making the ambiguity in "a" apparent.

      The motivations for these changes were hoisting problems reported
      by Reinier van den Born (reinier@vnet.ibm.com) and several others.

#113. (Changed in 1.33MR10) new context guarded pred: (g)? && <<p>>? expr

      The existing context guarded predicate:

            rule : (guard)? => <<p>>? expr
                 | next_alternative
                 ;

      generates code which resembles:

            if (lookahead(expr) && (!guard || pred)) {
              expr()
            } else ....

      This is not suitable for some applications because it allows
      expr() to be invoked when the predicate is false.  This is
      intentional because it is meant to mimic automatically computed
      predicate context.

      The new context guarded predicate uses the guard information
      differently because it has a different goal.  Consider:

            rule : (guard)? && <<p>>? expr
                 | next_alternative
                 ;

      The new style of context guarded predicate is equivalent to:

            rule : <<guard==true && pred>>? expr
                 | next_alternative
                 ;

      It generates code which resembles:

            if (lookahead(expr) && guard && pred) {
                expr();
            } else ...

      Both forms of guarded predicates severely restrict the form of
      the context guard: it can contain no rule references, no
      (...)*, no (...)+, and no {...}.  It may contain token and
      token class references, and alternation ("|").

      Addition for 1.33MR11: in the token expression all tokens must
      be at the same height of the token tree:

            (A ( B | C))? && ...            is ok (all height 2)
            (A ( B |  ))? && ...            is not ok (some 1, some 2)
            (A B C D | E F G H)? && ...     is ok (all height 4)
            (A B C D | E )? && ...          is not ok (some 4, some 1)

      This restriction is required in order to properly compute the lookahead
      set for expressions like:

            rule1 : (A B C)? && <<pred>>? rule2 ;
            rule2 : (A|X) (B|Y) (C|Z);

      This addition was suggested by Rienier van den Born (reinier@vnet.ibm.com)

#109. (Changed in 1.33MR10) improved trace information

      The quality of the trace information provided by the "-gd"
      switch has been improved significantly.  Here is an example
      of the output from a test program.  It shows the rule name,
      the first token of lookahead, the call depth, and the guess
      status:

        exit rule gusxx {"?"} depth 2
        enter rule gusxx {"?"} depth 2
        enter rule gus1 {"o"} depth 3 guessing
        guess done - returning to rule gus1 {"o"} at depth 3
                    (guess mode continues - an enclosing guess is still active)
        guess done - returning to rule gus1 {"Z"} at depth 3
                    (guess mode continues - an enclosing guess is still active)
        exit rule gus1 {"Z"} depth 3 guessing
        guess done - returning to rule gusxx {"o"} at depth 2 (guess mode ends)
        enter rule gus1 {"o"} depth 3
        guess done - returning to rule gus1 {"o"} at depth 3 (guess mode ends)
        guess done - returning to rule gus1 {"Z"} at depth 3 (guess mode ends)
        exit rule gus1 {"Z"} depth 3
        line 1: syntax error at "Z" missing SC
            ...

      Rule trace reporting is controlled by the value of the integer
      [zz]traceOptionValue:  when it is positive tracing is enabled,
      otherwise it is disabled.  Tracing during guess mode is controlled
      by the value of the integer [zz]traceGuessOptionValue.  When
      it is positive AND [zz]traceOptionValue is positive rule trace
      is reported in guess mode.

      The values of [zz]traceOptionValue and [zz]traceGuessOptionValue
      can be adjusted by subroutine calls listed below.

      Depending on the presence or absence of the antlr -gd switch
      the variable [zz]traceOptionValueDefault is set to 0 or 1.  When
      the parser is initialized or [zz]traceReset() is called the
      value of [zz]traceOptionValueDefault is copied to [zz]traceOptionValue.
      The value of [zz]traceGuessOptionValue is always initialzed to 1,
      but, as noted earlier, nothing will be reported unless
      [zz]traceOptionValue is also positive.

      When the parser state is saved/restored the value of the trace
      variables are also saved/restored.  If a restore causes a change in
      reporting behavior from on to off or vice versa this will be reported.

      When the -gd option is selected, the macro "#define zzTRACE_RULES"
      is added to appropriate output files.

        C++ mode
        --------
        int     traceOption(int delta)
        int     traceGuessOption(int delta)
        void    traceReset()
        int     traceOptionValueDefault

        C mode
        --------
        int     zzTraceOption(int delta)
        int     zzTraceGuessOption(int delta)
        void    zzTraceReset()
        int     zzTraceOptionValueDefault

      The argument "delta" is added to the traceOptionValue.  To
      turn on trace when inside a particular rule one:

        rule : <<traceOption(+1);>>
               (
                rest-of-rule
               )
               <<traceOption(-1);>>
       ;  /* fail clause */ <<traceOption(-1);>>

      One can use the same idea to turn *off* tracing within a
      rule by using a delta of (-1).

      An improvement in the rule trace was suggested by Sramji
      Ramanathan (ps@kumaran.com).

#108. A Note on Deallocation of Variables Allocated in Guess Mode

                            NOTE
        ------------------------------------------------------
        This mechanism only works for heap allocated variables
        ------------------------------------------------------

      The rewrite of the trace provides the machinery necessary
      to properly free variables or undo actions following a
      failed guess.

      The macro zzUSER_GUESS_HOOK(guessSeq,zzrv) is expanded
      as part of the zzGUESS macro.  When a guess is opened
      the value of zzrv is 0.  When a longjmp() is executed to
      undo the guess, the value of zzrv will be 1.

      The macro zzUSER_GUESS_DONE_HOOK(guessSeq) is expanded
      as part of the zzGUESS_DONE macro.  This is executed
      whether the guess succeeds or fails as part of closing
      the guess.

      The guessSeq is a sequence number which is assigned to each
      guess and is incremented by 1 for each guess which becomes
      active.  It is needed by the user to associate the start of
      a guess with the failure and/or completion (closing) of a
      guess.

      Guesses are nested.  They must be closed in the reverse
      of the order that they are opened.

      In order to free memory used by a variable during a guess
      a user must write a routine which can be called to
      register the variable along with the current guess sequence
      number provided by the zzUSER_GUESS_HOOK macro. If the guess
      fails, all variables tagged with the corresponding guess
      sequence number should be released.  This is ugly, but
      it would require a major rewrite of antlr 1.33 to use
      some mechanism other than setjmp()/longjmp().

      The order of calls for a *successful* guess would be:

        zzUSER_GUESS_HOOK(guessSeq,0);
        zzUSER_GUESS_DONE_HOOK(guessSeq);

      The order of calls for a *failed* guess would be:

        zzUSER_GUESS_HOOK(guessSeq,0);
        zzUSER_GUESS_HOOK(guessSeq,1);
        zzUSER_GUESS_DONE_HOOK(guessSeq);

      The default definitions of these macros are empty strings.

      Here is an example in C++ mode.  The zzUSER_GUESS_HOOK and
      zzUSER_GUESS_DONE_HOOK macros and myGuessHook() routine
      can be used without change in both C and C++ versions.

      ----------------------------------------------------------------------
        <<

        #include "AToken.h"

        typedef ANTLRCommonToken ANTLRToken;

        #include "DLGLexer.h"

        int main() {

          {
            DLGFileInput     in(stdin);
            DLGLexer         lexer(&in,2000);
            ANTLRTokenBuffer pipe(&lexer,1);
            ANTLRCommonToken aToken;
            P                parser(&pipe);

            lexer.setToken(&aToken);
            parser.init();
            parser.start();
          };

          fclose(stdin);
          fclose(stdout);
          return 0;
        }

        >>

        <<
        char *s=NULL;

        #undef zzUSER_GUESS_HOOK
        #define zzUSER_GUESS_HOOK(guessSeq,zzrv) myGuessHook(guessSeq,zzrv);
        #undef zzUSER_GUESS_DONE_HOOK
        #define zzUSER_GUESS_DONE_HOOK(guessSeq)   myGuessHook(guessSeq,2);

        void myGuessHook(int guessSeq,int zzrv) {
          if (zzrv == 0) {
            fprintf(stderr,"User hook: starting guess #%d\n",guessSeq);
          } else if (zzrv == 1) {
            free (s);
            s=NULL;
            fprintf(stderr,"User hook: failed guess #%d\n",guessSeq);
          } else if (zzrv == 2) {
            free (s);
            s=NULL;
            fprintf(stderr,"User hook: ending guess #%d\n",guessSeq);
          };
        }

        >>

        #token A    "a"
        #token      "[\t \ \n]"     <<skip();>>

        class P {

        start : (top)+
              ;

        top   : (which) ?   <<fprintf(stderr,"%s is a which\n",s); free(s); s=NULL; >>
              | other       <<fprintf(stderr,"%s is an other\n",s); free(s); s=NULL; >>
              ; <<if (s != NULL) free(s); s=NULL; >>

        which : which2
              ;

        which2 : which3
              ;
        which3
              : (label)?         <<fprintf(stderr,"%s is a label\n",s);>>
              | (global)?        <<fprintf(stderr,"%s is a global\n",s);>>
              | (exclamation)?   <<fprintf(stderr,"%s is an exclamation\n",s);>>
              ;

        label :       <<s=strdup(LT(1)->getText());>> A ":" ;

        global :      <<s=strdup(LT(1)->getText());>> A "::" ;

        exclamation : <<s=strdup(LT(1)->getText());>> A "!" ;

        other :       <<s=strdup(LT(1)->getText());>> "other" ;

        }
      ----------------------------------------------------------------------

      This is a silly example, but illustrates the idea.  For the input
      "a ::" with tracing enabled the output begins:

      ----------------------------------------------------------------------
        enter rule "start" depth 1
        enter rule "top" depth 2
        User hook: starting guess #1
        enter rule "which" depth 3 guessing
        enter rule "which2" depth 4 guessing
        enter rule "which3" depth 5 guessing
        User hook: starting guess #2
        enter rule "label" depth 6 guessing
        guess failed
        User hook: failed guess #2
        guess done - returning to rule "which3" at depth 5 (guess mode continues
                                                 - an enclosing guess is still active)
        User hook: ending guess #2
        User hook: starting guess #3
        enter rule "global" depth 6 guessing
        exit rule "global" depth 6 guessing
        guess done - returning to rule "which3" at depth 5 (guess mode continues
                                                 - an enclosing guess is still active)
        User hook: ending guess #3
        enter rule "global" depth 6 guessing
        exit rule "global" depth 6 guessing
        exit rule "which3" depth 5 guessing
        exit rule "which2" depth 4 guessing
        exit rule "which" depth 3 guessing
        guess done - returning to rule "top" at depth 2 (guess mode ends)
        User hook: ending guess #1
        enter rule "which" depth 3
        .....
      ----------------------------------------------------------------------

      Remember:

        (a) Only init-actions are executed during guess mode.
        (b) A rule can be invoked multiple times during guess mode.
        (c) If the guess succeeds the rule will be called once more
              without guess mode so that normal actions will be executed.
            This means that the init-action might need to distinguish
              between guess mode and non-guess mode using the variable
              [zz]guessing.

#101. (Changed in 1.33MR10) antlr -info command line switch

        -info

            p   - extra predicate information in generated file

            t   - information about tnode use:
                    at the end of each rule in generated file
                    summary on stderr at end of program

            m   - monitor progress
                    prints name of each rule as it is started
                    flushes output at start of each rule

            f   - first/follow set information to stdout

            0   - no operation (added in 1.33MR11)

      The options may be combined and may appear in any order.
      For example:

        antlr -info ptm -CC -gt -mrhoist on mygrammar.g

#100a. (Changed in 1.33MR10) Predicate tree simplification

      When the same predicates can be referenced in more than one
      alternative of a block large predicate trees can be formed.

      The difference that these optimizations make is so dramatic
      that I have decided to use it even when -mrhoist is not selected.

      Consider the following grammar:

        start : ( all )* ;

        all   : a
              | d
              | e
              | f
              ;

        a     : c A B
              | c A C
              ;

        c     : <<AAA(LATEXT(2))>>?
              ;

        d     : <<BBB(LATEXT(2))>>? B C
              ;

        e     : <<CCC(LATEXT(2))>>? B C
              ;

        f     : e X Y
              ;

      In rule "a" there is a reference to rule "c" in both alternatives.
      The length of the predicate AAA is k=2 and it can be followed in
      alternative 1 only by (A B) while in alternative 2 it can be
      followed only by (A C).  Thus they do not have identical context.

      In rule "all" the alternatives which refer to rules "e" and "f" allow
      elimination of the duplicate reference to predicate CCC.

      The table below summarized the kind of simplification performed by
      1.33MR10.  In the table, X and Y stand for single predicates
      (not trees).

        (OR X (OR Y (OR Z)))  => (OR X Y Z)
        (AND X (AND Y (AND Z)))  => (AND X Y Z)

        (OR X  (... (OR  X Y) ... ))     => (OR X (... Y ... ))
        (AND X (... (AND X Y) ... ))     => (AND X (... Y ... ))
        (OR X  (... (AND X Y) ... ))     => (OR X (...  ... ))
        (AND X (... (OR  X Y) ... ))     => (AND X (...  ... ))

        (AND X)               => X
        (OR X)                => X

      In a test with a complex grammar for a real application, a predicate
      tree with six OR nodes and 12 leaves was reduced to "(OR X Y Z)".

      In 1.33MR10 there is a greater effort to release memory used
      by predicates once they are no longer in use.

#100b. (Changed in 1.33MR10) Suppression of extra predicate tests

      The following optimizations require that -mrhoist be selected.

      It is relatively easy to optimize the code generated for predicate
      gates when they are of the form:

            (AND X Y Z ...)
        or  (OR  X Y Z ...)

      where X, Y, Z, and "..." represent individual predicates (leaves) not
      predicate trees.

      If the predicate is an AND the contexts of the X, Y, Z, etc. are
      ANDed together to create a single Tree context for the group and
      context tests for the individual predicates are suppressed:

            --------------------------------------------------
            Note: This was incorrect.  The contexts should be
            ORed together.  This has been fixed.  A more 
            complete description is available in item #152.
            ---------------------------------------------------

      Optimization 1:  (AND X Y Z ...)

        Suppose the context for Xtest is LA(1)==LP and the context for
        Ytest is LA(1)==LP && LA(2)==ID.

            Without the optimization the code would resemble:

                if (lookaheadContext &&
                    !(LA(1)==LP && LA(1)==LP && LA(2)==ID) ||
                        ( (! LA(1)==LP || Xtest) &&
                          (! (LA(1)==LP || LA(2)==ID) || Xtest)
                        )) {...

            With the -mrhoist optimization the code would resemble:

                if (lookaheadContext &&
                    ! (LA(1)==LP && LA(2)==ID) || (Xtest && Ytest) {...

      Optimization 2: (OR X Y Z ...) with identical contexts

        Suppose the context for Xtest is LA(1)==ID and for Ytest
        the context is also LA(1)==ID.

            Without the optimization the code would resemble:

                if (lookaheadContext &&
                    ! (LA(1)==ID || LA(1)==ID) ||
                        (LA(1)==ID && Xtest) ||
                        (LA(1)==ID && Ytest) {...

            With the -mrhoist optimization the code would resemble:

                if (lookaheadContext &&
                    (! LA(1)==ID) || (Xtest || Ytest) {...

      Optimization 3: (OR X Y Z ...) with distinct contexts

        Suppose the context for Xtest is LA(1)==ID and for Ytest
        the context is LA(1)==LP.

            Without the optimization the code would resemble:

                if (lookaheadContext &&
                    ! (LA(1)==ID || LA(1)==LP) ||
                        (LA(1)==ID && Xtest) ||
                        (LA(1)==LP && Ytest) {...

            With the -mrhoist optimization the code would resemble:

                if (lookaheadContext &&
                        (zzpf=0,
                            (LA(1)==ID && (zzpf=1) && Xtest) ||
                            (LA(1)==LP && (zzpf=1) && Ytest) ||
                            !zzpf) {

            These may appear to be of similar complexity at first,
            but the non-optimized version contains two tests of each
            context while the optimized version contains only one
            such test, as well as eliminating some of the inverted
            logic (" !(...) || ").

      Optimization 4: Computation of predicate gate trees

        When generating code for the gates of predicate expressions
        antlr 1.33 vanilla uses a recursive procedure to generate
        "&&" and "||" expressions for testing the lookahead. As each
        layer of the predicate tree is exposed a new set of "&&" and
        "||" expressions on the lookahead are generated.  In many
        cases the lookahead being tested has already been tested.

        With -mrhoist a lookahead tree is computed for the entire
        lookahead expression.  This means that predicates with identical
        context or context which is a subset of another predicate's
        context disappear.

        This is especially important for predicates formed by rules
        like the following:

            uppperCaseVowel : <<isUpperCase(LATEXT(1))>>?  vowel;
            vowel:          : <<isVowel(LATEXT(1))>>? LETTERS;

        These predicates are combined using AND since both must be
        satisfied for rule upperCaseVowel.  They have identical
        context which makes this optimization very effective.

      The affect of Items #100a and #100b together can be dramatic.  In
      a very large (but real world) grammar one particular predicate
      expression was reduced from an (unreadable) 50 predicate leaves,
      195 LA(1) terms, and 5500 characters to an (easily comprehensible)
      3 predicate leaves (all different) and a *single* LA(1) term.

#98.  (Changed in 1.33MR10) Option "-info p"

      When the user selects option "-info p" the program will generate
      detailed information about predicates.  If the user selects
      "-mrhoist on" additional detail will be provided explaining
      the promotion and suppression of predicates.  The output is part
      of the generated file and sandwiched between #if 0/#endif statements.

      Consider the following k=1 grammar:

        start : ( all ) * ;

        all   : ( a
                | b
                )
                ;

        a     : c B
              ;

        c     : <<LATEXT(1)>>?
              | B
              ;

        b     : <<LATEXT(1)>>? X
              ;

      Below is an excerpt of the output for rule "start" for the three
      predicate options (off, on, and maintenance release style hoisting).

      For those who do not wish to use the "-mrhoist on" option for code
      generation the option can be used in a "diagnostic" mode to provide
      valuable information:

            a. where one should insert null actions to inhibit hoisting
            b. a chain of rule references which shows where predicates are
               being hoisted

      ======================================================================
      Example of "-info p" with "-mrhoist on"
      ======================================================================
        #if 0

        Hoisting of predicate suppressed by alternative without predicate.
        The alt without the predicate includes all cases where the
           predicate is false.

           WITH predicate: line 11  v36.g
           WITHOUT predicate: line 12  v36.g

        The context set for the predicate:

             B

        The lookahead set for alt WITHOUT the semantic predicate:

             B

        The predicate:

          pred <<  LATEXT(1)>>?  depth=k=1  rule c  line 11  v36.g

            set context:
               B
            tree context: null

        Chain of referenced rules:

            #0  in rule start (line 1 v36.g) to rule all
            #1  in rule all (line 3 v36.g) to rule a
            #2  in rule a (line 8 v36.g) to rule c
            #3  in rule c (line 11 v36.g)

        #endif
        &&
        #if 0

        pred <<  LATEXT(1)>>?  depth=k=1  rule b  line 15  v36.g

          set context:
             X
          tree context: null

        #endif
      ======================================================================
      Example of "-info p"  with the default -prc setting ( "-prc off")
      ======================================================================
        #if 0

        OR
          pred <<  LATEXT(1)>>?  depth=k=1  rule c  line 11  v36.g

            set context:
              nil
            tree context: null

          pred <<  LATEXT(1)>>?  depth=k=1  rule b  line 15  v36.g

            set context:
              nil
            tree context: null

        #endif
      ======================================================================
      Example of "-info p" with "-prc on" and "-mrhoist off"
      ======================================================================
        #if 0

        OR
          pred <<  LATEXT(1)>>?  depth=k=1  rule c  line 11  v36.g

            set context:
               B
            tree context: null

          pred <<  LATEXT(1)>>?  depth=k=1  rule b  line 15  v36.g

            set context:
               X
            tree context: null

        #endif
      ======================================================================

#60.  (Changed in 1.33MR7) Major changes to exception handling

        There were significant problems in the handling of exceptions
        in 1.33 vanilla.  The general problem is that it can only
        process one level of exception handler.  For example, a named
        exception handler, an exception handler for an alternative, or
        an exception for a subrule  always went to the rule's exception
        handler if there was no "catch" which matched the exception.

        In 1.33MR7 the exception handlers properly "nest".  If an
        exception handler does not have a matching "catch" then the
        nextmost outer exception handler is checked for an appropriate
        "catch" clause, and so on until an exception handler with an
        appropriate "catch" is found.

        There are still undesirable features in the way exception
        handlers are implemented, but I do not have time to fix them
        at the moment:

            The exception handlers for alternatives are outside the
            block containing the alternative.  This makes it impossible
            to access variables declared in a block or to resume the
            parse by "falling through".  The parse can still be easily
            resumed in other ways, but not in the most natural fashion.

            This results in an inconsistentcy between named exception
            handlers and exception handlers for alternatives.  When
            an exception handler for an alternative "falls through"
            it goes to the nextmost outer handler - not the "normal
            action".

        A major difference between 1.33MR7 and 1.33 vanilla is
        the default action after an exception is caught:

            1.33 Vanilla
            ------------
            In 1.33 vanilla the signal value is set to zero ("NoSignal")
            and the code drops through to the code following the exception.
            For named exception handlers this is the "normal action".
            For alternative exception handlers this is the rule's handler.

            1.33MR7
            -------
            In 1.33MR7 the signal value is NOT automatically set to zero.

            There are two cases:

                For named exception handlers: if the signal value has been
                set to zero the code drops through to the "normal action".

                For all other cases the code branches to the nextmost outer
                exception handler until it reaches the handler for the rule.

        The following macros have been defined for convenience:

            C/C++ Mode Name
            --------------------
            (zz)suppressSignal
                  set signal & return signal arg to 0 ("NoSignal")
            (zz)setSignal(intValue)
                  set signal & return signal arg to some value
            (zz)exportSignal
                  copy the signal value to the return signal arg

        I'm not sure why PCCTS make a distinction between the local
        signal value and the return signal argument, but I'm loathe
        to change the code. The burden of copying the local signal
        value to the return signal argument can be given to the
        default signal handler, I suppose.

#53.  (Explanation for 1.33MR6) What happens after an exception is caught ?

        The Book is silent about what happens after an exception
        is caught.

        The following code fragment prints "Error Action" followed
        by "Normal Action".

        test : Word ex:Number <<printf("Normal Action\n");>>
                exception[ex]
                   catch NoViableAlt:
                        <<printf("Error Action\n");>>
        ;

        The reason for "Normal Action" is that the normal flow of the
        program after a user-written exception handler is to "drop through".
        In the case of an exception handler for a rule this results in
        the exection of a "return" statement.  In the case of an
        exception handler attached to an alternative, rule, or token
        this is the code that would have executed had there been no
        exception.

        The user can achieve the desired result by using a "return"
        statement.

        test : Word ex:Number <<printf("Normal Action\n");>>
                exception[ex]
                   catch NoViableAlt:
                        <<printf("Error Action\n"); return;>>
        ;

        The most powerful mechanism for recovery from parse errors
        in pccts is syntactic predicates because they provide
        backtracking.  Exceptions allow "return", "break",
        "consumeUntil(...)", "goto _handler", "goto _fail", and
        changing the _signal value.

#41.  (Added in 1.33MR6) antlr -stdout

        Using "antlr -stdout ..." forces the text that would
        normally go to the grammar.c or grammar.cpp file to
        stdout.

#40.  (Added in 1.33MR6) antlr -tab to change tab stops

        Using "antlr -tab number ..." changes the tab stops
        for the grammar.c or grammar.cpp file.  The number
        must be between 0 and 8.  Using 0 gives tab characters,
        values between 1 and 8 give the appropriate number of
        space characters.

#34.  (Added to 1.33MR1) Add public DLGLexerBase::set_line(int newValue)

        Previously there was no public function for changing the line
        number maintained by the lexer.

#28.   (Added to 1.33MR1) More control over DLG header

        Version 1.33MR1 adds the following directives to PCCTS
        for C++ mode:

          #lexprefix  <<source code>>

                Adds source code to the DLGLexer.h file
                after the #include "DLexerBase.h" but
                before the start of the class definition.

          #lexmember  <<source code>>

                Adds source code to the DLGLexer.h file
                as part of the DLGLexer class body.  It
                appears immediately after the start of
                the class and a "public: statement.