/** @file
    OS-specific module implementation for EDK II and UEFI.
    Derived from posixmodule.c in Python 2.7.2.

    Copyright (c) 2011 - 2012, Intel Corporation. All rights reserved.<BR>
    This program and the accompanying materials are licensed and made available under
    the terms and conditions of the BSD License that accompanies this distribution.
    The full text of the license may be found at
    http://opensource.org/licenses/bsd-license.

    THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
    WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#define PY_SSIZE_T_CLEAN

#include "Python.h"
#include "structseq.h"

#include  <stdio.h>
#include  <stdlib.h>
#include  <wchar.h>
#include  <sys/syslimits.h>

#ifdef __cplusplus
extern "C" {
#endif

PyDoc_STRVAR(edk2__doc__,
             "This module provides access to UEFI firmware functionality that is\n\
             standardized by the C Standard and the POSIX standard (a thinly\n\
             disguised Unix interface).  Refer to the library manual and\n\
             corresponding UEFI Specification entries for more information on calls.");

#ifndef Py_USING_UNICODE
  /* This is used in signatures of functions. */
  #define Py_UNICODE void
#endif

#ifdef HAVE_SYS_TYPES_H
  #include <sys/types.h>
#endif /* HAVE_SYS_TYPES_H */

#ifdef HAVE_SYS_STAT_H
  #include <sys/stat.h>
#endif /* HAVE_SYS_STAT_H */

#ifdef HAVE_SYS_WAIT_H
  #include <sys/wait.h>           /* For WNOHANG */
#endif

#ifdef HAVE_SIGNAL_H
  #include <signal.h>
#endif

#ifdef HAVE_FCNTL_H
  #include <fcntl.h>
#endif /* HAVE_FCNTL_H */

#ifdef HAVE_GRP_H
  #include <grp.h>
#endif

#ifdef HAVE_SYSEXITS_H
  #include <sysexits.h>
#endif /* HAVE_SYSEXITS_H */

#ifdef HAVE_SYS_LOADAVG_H
  #include <sys/loadavg.h>
#endif

#ifdef HAVE_UTIME_H
  #include <utime.h>
#endif /* HAVE_UTIME_H */

#ifdef HAVE_SYS_UTIME_H
  #include <sys/utime.h>
  #define HAVE_UTIME_H /* pretend we do for the rest of this file */
#endif /* HAVE_SYS_UTIME_H */

#ifdef HAVE_SYS_TIMES_H
  #include <sys/times.h>
#endif /* HAVE_SYS_TIMES_H */

#ifdef HAVE_SYS_PARAM_H
  #include <sys/param.h>
#endif /* HAVE_SYS_PARAM_H */

#ifdef HAVE_SYS_UTSNAME_H
  #include <sys/utsname.h>
#endif /* HAVE_SYS_UTSNAME_H */

#ifdef HAVE_DIRENT_H
  #include <dirent.h>
  #define NAMLEN(dirent) wcslen((dirent)->FileName)
#else
  #define dirent direct
  #define NAMLEN(dirent) (dirent)->d_namlen
  #ifdef HAVE_SYS_NDIR_H
    #include <sys/ndir.h>
  #endif
  #ifdef HAVE_SYS_DIR_H
    #include <sys/dir.h>
  #endif
  #ifdef HAVE_NDIR_H
    #include <ndir.h>
  #endif
#endif

#ifndef MAXPATHLEN
  #if defined(PATH_MAX) && PATH_MAX > 1024
    #define MAXPATHLEN PATH_MAX
  #else
    #define MAXPATHLEN 1024
  #endif
#endif /* MAXPATHLEN */

#define WAIT_TYPE int
#define WAIT_STATUS_INT(s) (s)

/* Issue #1983: pid_t can be longer than a C long on some systems */
#if !defined(SIZEOF_PID_T) || SIZEOF_PID_T == SIZEOF_INT
  #define PARSE_PID "i"
  #define PyLong_FromPid PyInt_FromLong
  #define PyLong_AsPid PyInt_AsLong
#elif SIZEOF_PID_T == SIZEOF_LONG
  #define PARSE_PID "l"
  #define PyLong_FromPid PyInt_FromLong
  #define PyLong_AsPid PyInt_AsLong
#elif defined(SIZEOF_LONG_LONG) && SIZEOF_PID_T == SIZEOF_LONG_LONG
  #define PARSE_PID "L"
  #define PyLong_FromPid PyLong_FromLongLong
  #define PyLong_AsPid PyInt_AsLongLong
#else
  #error "sizeof(pid_t) is neither sizeof(int), sizeof(long) or sizeof(long long)"
#endif /* SIZEOF_PID_T */

/* Don't use the "_r" form if we don't need it (also, won't have a
   prototype for it, at least on Solaris -- maybe others as well?). */
#if defined(HAVE_CTERMID_R) && defined(WITH_THREAD)
  #define USE_CTERMID_R
#endif

#if defined(HAVE_TMPNAM_R) && defined(WITH_THREAD)
  #define USE_TMPNAM_R
#endif

/* choose the appropriate stat and fstat functions and return structs */
#undef STAT
#undef FSTAT
#undef STRUCT_STAT
#define STAT stat
#define FSTAT fstat
#define STRUCT_STAT struct stat

/* dummy version. _PyVerify_fd() is already defined in fileobject.h */
#define _PyVerify_fd_dup2(A, B) (1)

#ifndef UEFI_C_SOURCE
/* Return a dictionary corresponding to the POSIX environment table */
extern char **environ;

static PyObject *
convertenviron(void)
{
    PyObject *d;
    char **e;
    d = PyDict_New();
    if (d == NULL)
        return NULL;
    if (environ == NULL)
        return d;
    /* This part ignores errors */
    for (e = environ; *e != NULL; e++) {
        PyObject *k;
        PyObject *v;
        char *p = strchr(*e, '=');
        if (p == NULL)
            continue;
        k = PyString_FromStringAndSize(*e, (int)(p-*e));
        if (k == NULL) {
            PyErr_Clear();
            continue;
        }
        v = PyString_FromString(p+1);
        if (v == NULL) {
            PyErr_Clear();
            Py_DECREF(k);
            continue;
        }
        if (PyDict_GetItem(d, k) == NULL) {
            if (PyDict_SetItem(d, k, v) != 0)
                PyErr_Clear();
        }
        Py_DECREF(k);
        Py_DECREF(v);
    }
    return d;
}
#endif  /* UEFI_C_SOURCE */

/* Set a POSIX-specific error from errno, and return NULL */

static PyObject *
posix_error(void)
{
    return PyErr_SetFromErrno(PyExc_OSError);
}
static PyObject *
posix_error_with_filename(char* name)
{
    return PyErr_SetFromErrnoWithFilename(PyExc_OSError, name);
}


static PyObject *
posix_error_with_allocated_filename(char* name)
{
    PyObject *rc = PyErr_SetFromErrnoWithFilename(PyExc_OSError, name);
    PyMem_Free(name);
    return rc;
}

/* POSIX generic methods */

#ifndef UEFI_C_SOURCE
  static PyObject *
  posix_fildes(PyObject *fdobj, int (*func)(int))
  {
      int fd;
      int res;
      fd = PyObject_AsFileDescriptor(fdobj);
      if (fd < 0)
          return NULL;
      if (!_PyVerify_fd(fd))
          return posix_error();
      Py_BEGIN_ALLOW_THREADS
      res = (*func)(fd);
      Py_END_ALLOW_THREADS
      if (res < 0)
          return posix_error();
      Py_INCREF(Py_None);
      return Py_None;
  }
#endif  /* UEFI_C_SOURCE */

static PyObject *
posix_1str(PyObject *args, char *format, int (*func)(const char*))
{
    char *path1 = NULL;
    int res;
    if (!PyArg_ParseTuple(args, format,
                          Py_FileSystemDefaultEncoding, &path1))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = (*func)(path1);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path1);
    PyMem_Free(path1);
    Py_INCREF(Py_None);
    return Py_None;
}

static PyObject *
posix_2str(PyObject *args,
           char *format,
           int (*func)(const char *, const char *))
{
    char *path1 = NULL, *path2 = NULL;
    int res;
    if (!PyArg_ParseTuple(args, format,
                          Py_FileSystemDefaultEncoding, &path1,
                          Py_FileSystemDefaultEncoding, &path2))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = (*func)(path1, path2);
    Py_END_ALLOW_THREADS
    PyMem_Free(path1);
    PyMem_Free(path2);
    if (res != 0)
        /* XXX how to report both path1 and path2??? */
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}

PyDoc_STRVAR(stat_result__doc__,
"stat_result: Result from stat or lstat.\n\n\
This object may be accessed either as a tuple of\n\
  (mode, ino, dev, nlink, uid, gid, size, atime, mtime, ctime)\n\
or via the attributes st_mode, st_ino, st_dev, st_nlink, st_uid, and so on.\n\
\n\
Posix/windows: If your platform supports st_blksize, st_blocks, st_rdev,\n\
or st_flags, they are available as attributes only.\n\
\n\
See os.stat for more information.");

static PyStructSequence_Field stat_result_fields[] = {
    {"st_mode",    "protection bits"},
    //{"st_ino",     "inode"},
    //{"st_dev",     "device"},
    //{"st_nlink",   "number of hard links"},
    //{"st_uid",     "user ID of owner"},
    //{"st_gid",     "group ID of owner"},
    {"st_size",    "total size, in bytes"},
    /* The NULL is replaced with PyStructSequence_UnnamedField later. */
    {NULL,   "integer time of last access"},
    {NULL,   "integer time of last modification"},
    {NULL,   "integer time of last change"},
    {"st_atime",   "time of last access"},
    {"st_mtime",   "time of last modification"},
    {"st_ctime",   "time of last change"},
#ifdef HAVE_STRUCT_STAT_ST_BLKSIZE
    {"st_blksize", "blocksize for filesystem I/O"},
#endif
#ifdef HAVE_STRUCT_STAT_ST_BLOCKS
    {"st_blocks",  "number of blocks allocated"},
#endif
#ifdef HAVE_STRUCT_STAT_ST_RDEV
    {"st_rdev",    "device type (if inode device)"},
#endif
#ifdef HAVE_STRUCT_STAT_ST_FLAGS
    {"st_flags",   "user defined flags for file"},
#endif
#ifdef HAVE_STRUCT_STAT_ST_GEN
    {"st_gen",    "generation number"},
#endif
#ifdef HAVE_STRUCT_STAT_ST_BIRTHTIME
    {"st_birthtime",   "time of creation"},
#endif
    {0}
};

#ifdef HAVE_STRUCT_STAT_ST_BLKSIZE
#define ST_BLKSIZE_IDX 8
#else
#define ST_BLKSIZE_IDX 12
#endif

#ifdef HAVE_STRUCT_STAT_ST_BLOCKS
#define ST_BLOCKS_IDX (ST_BLKSIZE_IDX+1)
#else
#define ST_BLOCKS_IDX ST_BLKSIZE_IDX
#endif

#ifdef HAVE_STRUCT_STAT_ST_RDEV
#define ST_RDEV_IDX (ST_BLOCKS_IDX+1)
#else
#define ST_RDEV_IDX ST_BLOCKS_IDX
#endif

#ifdef HAVE_STRUCT_STAT_ST_FLAGS
#define ST_FLAGS_IDX (ST_RDEV_IDX+1)
#else
#define ST_FLAGS_IDX ST_RDEV_IDX
#endif

#ifdef HAVE_STRUCT_STAT_ST_GEN
#define ST_GEN_IDX (ST_FLAGS_IDX+1)
#else
#define ST_GEN_IDX ST_FLAGS_IDX
#endif

#ifdef HAVE_STRUCT_STAT_ST_BIRTHTIME
#define ST_BIRTHTIME_IDX (ST_GEN_IDX+1)
#else
#define ST_BIRTHTIME_IDX ST_GEN_IDX
#endif

static PyStructSequence_Desc stat_result_desc = {
    "stat_result", /* name */
    stat_result__doc__, /* doc */
    stat_result_fields,
    10
};

#ifndef UEFI_C_SOURCE   /* Not in UEFI */
PyDoc_STRVAR(statvfs_result__doc__,
"statvfs_result: Result from statvfs or fstatvfs.\n\n\
This object may be accessed either as a tuple of\n\
  (bsize, frsize, blocks, bfree, bavail, files, ffree, favail, flag, namemax),\n\
or via the attributes f_bsize, f_frsize, f_blocks, f_bfree, and so on.\n\
\n\
See os.statvfs for more information.");

static PyStructSequence_Field statvfs_result_fields[] = {
    {"f_bsize",  },
    {"f_frsize", },
    {"f_blocks", },
    {"f_bfree",  },
    {"f_bavail", },
    {"f_files",  },
    {"f_ffree",  },
    {"f_favail", },
    {"f_flag",   },
    {"f_namemax",},
    {0}
};

static PyStructSequence_Desc statvfs_result_desc = {
    "statvfs_result", /* name */
    statvfs_result__doc__, /* doc */
    statvfs_result_fields,
    10
};

static PyTypeObject StatVFSResultType;
#endif

static int initialized;
static PyTypeObject StatResultType;
static newfunc structseq_new;

static PyObject *
statresult_new(PyTypeObject *type, PyObject *args, PyObject *kwds)
{
    PyStructSequence *result;
    int i;

    result = (PyStructSequence*)structseq_new(type, args, kwds);
    if (!result)
        return NULL;
    /* If we have been initialized from a tuple,
       st_?time might be set to None. Initialize it
       from the int slots.  */
    for (i = 7; i <= 9; i++) {
        if (result->ob_item[i+3] == Py_None) {
            Py_DECREF(Py_None);
            Py_INCREF(result->ob_item[i]);
            result->ob_item[i+3] = result->ob_item[i];
        }
    }
    return (PyObject*)result;
}



/* If true, st_?time is float. */
#if defined(UEFI_C_SOURCE)
  static int _stat_float_times = 0;
#else
  static int _stat_float_times = 1;

PyDoc_STRVAR(stat_float_times__doc__,
"stat_float_times([newval]) -> oldval\n\n\
Determine whether os.[lf]stat represents time stamps as float objects.\n\
If newval is True, future calls to stat() return floats, if it is False,\n\
future calls return ints. \n\
If newval is omitted, return the current setting.\n");

static PyObject*
stat_float_times(PyObject* self, PyObject *args)
{
    int newval = -1;

    if (!PyArg_ParseTuple(args, "|i:stat_float_times", &newval))
        return NULL;
    if (newval == -1)
        /* Return old value */
        return PyBool_FromLong(_stat_float_times);
    _stat_float_times = newval;
    Py_INCREF(Py_None);
    return Py_None;
}
#endif  /* UEFI_C_SOURCE */

static void
fill_time(PyObject *v, int index, time_t sec, unsigned long nsec)
{
    PyObject *fval,*ival;
#if SIZEOF_TIME_T > SIZEOF_LONG
    ival = PyLong_FromLongLong((PY_LONG_LONG)sec);
#else
    ival = PyInt_FromLong((long)sec);
#endif
    if (!ival)
        return;
    if (_stat_float_times) {
        fval = PyFloat_FromDouble(sec + 1e-9*nsec);
    } else {
        fval = ival;
        Py_INCREF(fval);
    }
    PyStructSequence_SET_ITEM(v, index, ival);
    PyStructSequence_SET_ITEM(v, index+3, fval);
}

/* pack a system stat C structure into the Python stat tuple
   (used by posix_stat() and posix_fstat()) */
static PyObject*
_pystat_fromstructstat(STRUCT_STAT *st)
{
    unsigned long ansec, mnsec, cnsec;
    PyObject *v = PyStructSequence_New(&StatResultType);
    if (v == NULL)
        return NULL;

    PyStructSequence_SET_ITEM(v, 0, PyInt_FromLong((long)st->st_mode));
    PyStructSequence_SET_ITEM(v, 1,
                              PyLong_FromLongLong((PY_LONG_LONG)st->st_size));

    ansec = mnsec = cnsec = 0;
    /* The index used by fill_time is the index of the integer time.
       fill_time will add 3 to the index to get the floating time index.
    */
    fill_time(v, 2, st->st_atime, ansec);
    fill_time(v, 3, st->st_mtime, mnsec);
    fill_time(v, 4, st->st_mtime, cnsec);

#ifdef HAVE_STRUCT_STAT_ST_BLKSIZE
    PyStructSequence_SET_ITEM(v, ST_BLKSIZE_IDX,
                              PyInt_FromLong((long)st->st_blksize));
#endif
#ifdef HAVE_STRUCT_STAT_ST_BLOCKS
    PyStructSequence_SET_ITEM(v, ST_BLOCKS_IDX,
                              PyInt_FromLong((long)st->st_blocks));
#endif
#ifdef HAVE_STRUCT_STAT_ST_RDEV
    PyStructSequence_SET_ITEM(v, ST_RDEV_IDX,
                              PyInt_FromLong((long)st->st_rdev));
#endif
#ifdef HAVE_STRUCT_STAT_ST_GEN
    PyStructSequence_SET_ITEM(v, ST_GEN_IDX,
                              PyInt_FromLong((long)st->st_gen));
#endif
#ifdef HAVE_STRUCT_STAT_ST_BIRTHTIME
    {
      PyObject *val;
      unsigned long bsec,bnsec;
      bsec = (long)st->st_birthtime;
#ifdef HAVE_STAT_TV_NSEC2
      bnsec = st->st_birthtimespec.tv_nsec;
#else
      bnsec = 0;
#endif
      if (_stat_float_times) {
        val = PyFloat_FromDouble(bsec + 1e-9*bnsec);
      } else {
        val = PyInt_FromLong((long)bsec);
      }
      PyStructSequence_SET_ITEM(v, ST_BIRTHTIME_IDX,
                                val);
    }
#endif
#ifdef HAVE_STRUCT_STAT_ST_FLAGS
    PyStructSequence_SET_ITEM(v, ST_FLAGS_IDX,
                              PyInt_FromLong((long)st->st_flags));
#endif

    if (PyErr_Occurred()) {
        Py_DECREF(v);
        return NULL;
    }

    return v;
}

static PyObject *
posix_do_stat(PyObject *self, PyObject *args,
              char *format,
              int (*statfunc)(const char *, STRUCT_STAT *),
              char *wformat,
              int (*wstatfunc)(const Py_UNICODE *, STRUCT_STAT *))
{
    STRUCT_STAT st;
    char *path = NULL;          /* pass this to stat; do not free() it */
    char *pathfree = NULL;  /* this memory must be free'd */
    int res;
    PyObject *result;

    if (!PyArg_ParseTuple(args, format,
                          Py_FileSystemDefaultEncoding, &path))
        return NULL;
    pathfree = path;

    Py_BEGIN_ALLOW_THREADS
    res = (*statfunc)(path, &st);
    Py_END_ALLOW_THREADS

    if (res != 0) {
        result = posix_error_with_filename(pathfree);
    }
    else
        result = _pystat_fromstructstat(&st);

    PyMem_Free(pathfree);
    return result;
}

/* POSIX methods */

PyDoc_STRVAR(posix_access__doc__,
"access(path, mode) -> True if granted, False otherwise\n\n\
Use the real uid/gid to test for access to a path.  Note that most\n\
operations will use the effective uid/gid, therefore this routine can\n\
be used in a suid/sgid environment to test if the invoking user has the\n\
specified access to the path.  The mode argument can be F_OK to test\n\
existence, or the inclusive-OR of R_OK, W_OK, and X_OK.");

static PyObject *
posix_access(PyObject *self, PyObject *args)
{
    char *path;
    int mode;

    int res;
    if (!PyArg_ParseTuple(args, "eti:access",
                          Py_FileSystemDefaultEncoding, &path, &mode))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = access(path, mode);
    Py_END_ALLOW_THREADS
    PyMem_Free(path);
    return PyBool_FromLong(res == 0);
}

#ifndef F_OK
  #define F_OK 0
#endif
#ifndef R_OK
  #define R_OK 4
#endif
#ifndef W_OK
  #define W_OK 2
#endif
#ifndef X_OK
  #define X_OK 1
#endif

PyDoc_STRVAR(posix_chdir__doc__,
"chdir(path)\n\n\
Change the current working directory to the specified path.");

static PyObject *
posix_chdir(PyObject *self, PyObject *args)
{
    return posix_1str(args, "et:chdir", chdir);
}

PyDoc_STRVAR(posix_chmod__doc__,
"chmod(path, mode)\n\n\
Change the access permissions of a file.");

static PyObject *
posix_chmod(PyObject *self, PyObject *args)
{
    char *path = NULL;
    int i;
    int res;
    if (!PyArg_ParseTuple(args, "eti:chmod", Py_FileSystemDefaultEncoding,
                          &path, &i))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = chmod(path, i);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
}

#ifdef HAVE_FCHMOD
PyDoc_STRVAR(posix_fchmod__doc__,
"fchmod(fd, mode)\n\n\
Change the access permissions of the file given by file\n\
descriptor fd.");

static PyObject *
posix_fchmod(PyObject *self, PyObject *args)
{
    int fd, mode, res;
    if (!PyArg_ParseTuple(args, "ii:fchmod", &fd, &mode))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = fchmod(fd, mode);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_RETURN_NONE;
}
#endif /* HAVE_FCHMOD */

#ifdef HAVE_LCHMOD
PyDoc_STRVAR(posix_lchmod__doc__,
"lchmod(path, mode)\n\n\
Change the access permissions of a file. If path is a symlink, this\n\
affects the link itself rather than the target.");

static PyObject *
posix_lchmod(PyObject *self, PyObject *args)
{
    char *path = NULL;
    int i;
    int res;
    if (!PyArg_ParseTuple(args, "eti:lchmod", Py_FileSystemDefaultEncoding,
                          &path, &i))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = lchmod(path, i);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_RETURN_NONE;
}
#endif /* HAVE_LCHMOD */


#ifdef HAVE_CHFLAGS
PyDoc_STRVAR(posix_chflags__doc__,
"chflags(path, flags)\n\n\
Set file flags.");

static PyObject *
posix_chflags(PyObject *self, PyObject *args)
{
    char *path;
    unsigned long flags;
    int res;
    if (!PyArg_ParseTuple(args, "etk:chflags",
                          Py_FileSystemDefaultEncoding, &path, &flags))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = chflags(path, flags);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_CHFLAGS */

#ifdef HAVE_LCHFLAGS
PyDoc_STRVAR(posix_lchflags__doc__,
"lchflags(path, flags)\n\n\
Set file flags.\n\
This function will not follow symbolic links.");

static PyObject *
posix_lchflags(PyObject *self, PyObject *args)
{
    char *path;
    unsigned long flags;
    int res;
    if (!PyArg_ParseTuple(args, "etk:lchflags",
                          Py_FileSystemDefaultEncoding, &path, &flags))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = lchflags(path, flags);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_LCHFLAGS */

#ifdef HAVE_CHROOT
PyDoc_STRVAR(posix_chroot__doc__,
"chroot(path)\n\n\
Change root directory to path.");

static PyObject *
posix_chroot(PyObject *self, PyObject *args)
{
    return posix_1str(args, "et:chroot", chroot);
}
#endif

#ifdef HAVE_FSYNC
PyDoc_STRVAR(posix_fsync__doc__,
"fsync(fildes)\n\n\
force write of file with filedescriptor to disk.");

static PyObject *
posix_fsync(PyObject *self, PyObject *fdobj)
{
    return posix_fildes(fdobj, fsync);
}
#endif /* HAVE_FSYNC */

#ifdef HAVE_FDATASYNC

#ifdef __hpux
extern int fdatasync(int); /* On HP-UX, in libc but not in unistd.h */
#endif

PyDoc_STRVAR(posix_fdatasync__doc__,
"fdatasync(fildes)\n\n\
force write of file with filedescriptor to disk.\n\
 does not force update of metadata.");

static PyObject *
posix_fdatasync(PyObject *self, PyObject *fdobj)
{
    return posix_fildes(fdobj, fdatasync);
}
#endif /* HAVE_FDATASYNC */


#ifdef HAVE_CHOWN
PyDoc_STRVAR(posix_chown__doc__,
"chown(path, uid, gid)\n\n\
Change the owner and group id of path to the numeric uid and gid.");

static PyObject *
posix_chown(PyObject *self, PyObject *args)
{
    char *path = NULL;
    long uid, gid;
    int res;
    if (!PyArg_ParseTuple(args, "etll:chown",
                          Py_FileSystemDefaultEncoding, &path,
                          &uid, &gid))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = chown(path, (uid_t) uid, (gid_t) gid);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_CHOWN */

#ifdef HAVE_FCHOWN
PyDoc_STRVAR(posix_fchown__doc__,
"fchown(fd, uid, gid)\n\n\
Change the owner and group id of the file given by file descriptor\n\
fd to the numeric uid and gid.");

static PyObject *
posix_fchown(PyObject *self, PyObject *args)
{
    int fd;
    long uid, gid;
    int res;
    if (!PyArg_ParseTuple(args, "ill:chown", &fd, &uid, &gid))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = fchown(fd, (uid_t) uid, (gid_t) gid);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_RETURN_NONE;
}
#endif /* HAVE_FCHOWN */

#ifdef HAVE_LCHOWN
PyDoc_STRVAR(posix_lchown__doc__,
"lchown(path, uid, gid)\n\n\
Change the owner and group id of path to the numeric uid and gid.\n\
This function will not follow symbolic links.");

static PyObject *
posix_lchown(PyObject *self, PyObject *args)
{
    char *path = NULL;
    long uid, gid;
    int res;
    if (!PyArg_ParseTuple(args, "etll:lchown",
                          Py_FileSystemDefaultEncoding, &path,
                          &uid, &gid))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = lchown(path, (uid_t) uid, (gid_t) gid);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_LCHOWN */


#ifdef HAVE_GETCWD
PyDoc_STRVAR(posix_getcwd__doc__,
"getcwd() -> path\n\n\
Return a string representing the current working directory.");

static PyObject *
posix_getcwd(PyObject *self, PyObject *noargs)
{
    int bufsize_incr = 1024;
    int bufsize = 0;
    char *tmpbuf = NULL;
    char *res = NULL;
    PyObject *dynamic_return;

    Py_BEGIN_ALLOW_THREADS
    do {
        bufsize = bufsize + bufsize_incr;
        tmpbuf = malloc(bufsize);
        if (tmpbuf == NULL) {
            break;
        }
        res = getcwd(tmpbuf, bufsize);
        if (res == NULL) {
            free(tmpbuf);
        }
    } while ((res == NULL) && (errno == ERANGE));
    Py_END_ALLOW_THREADS

    if (res == NULL)
        return posix_error();

    dynamic_return = PyString_FromString(tmpbuf);
    free(tmpbuf);

    return dynamic_return;
}

#ifdef Py_USING_UNICODE
PyDoc_STRVAR(posix_getcwdu__doc__,
"getcwdu() -> path\n\n\
Return a unicode string representing the current working directory.");

static PyObject *
posix_getcwdu(PyObject *self, PyObject *noargs)
{
    char buf[1026];
    char *res;

    Py_BEGIN_ALLOW_THREADS
    res = getcwd(buf, sizeof buf);
    Py_END_ALLOW_THREADS
    if (res == NULL)
        return posix_error();
    return PyUnicode_Decode(buf, strlen(buf), Py_FileSystemDefaultEncoding,"strict");
}
#endif /* Py_USING_UNICODE */
#endif /* HAVE_GETCWD */


PyDoc_STRVAR(posix_listdir__doc__,
"listdir(path) -> list_of_strings\n\n\
Return a list containing the names of the entries in the directory.\n\
\n\
    path: path of directory to list\n\
\n\
The list is in arbitrary order.  It does not include the special\n\
entries '.' and '..' even if they are present in the directory.");

static PyObject *
posix_listdir(PyObject *self, PyObject *args)
{
    /* XXX Should redo this putting the (now four) versions of opendir
       in separate files instead of having them all here... */

    char           *name            = NULL;
    char           *MBname;
    PyObject       *d, *v;
    DIR            *dirp;
    struct dirent  *ep;
    int             arg_is_unicode  = 1;

    errno = 0;
    if (!PyArg_ParseTuple(args, "U:listdir", &v)) {
        arg_is_unicode = 0;
        PyErr_Clear();
    }
    if (!PyArg_ParseTuple(args, "et:listdir", Py_FileSystemDefaultEncoding, &name))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    dirp = opendir(name);
    Py_END_ALLOW_THREADS
    if (dirp == NULL) {
        return posix_error_with_allocated_filename(name);
    }
    if ((d = PyList_New(0)) == NULL) {
        Py_BEGIN_ALLOW_THREADS
        closedir(dirp);
        Py_END_ALLOW_THREADS
        PyMem_Free(name);
        return NULL;
    }
    if((MBname = malloc(NAME_MAX)) == NULL) {
      Py_BEGIN_ALLOW_THREADS
      closedir(dirp);
      Py_END_ALLOW_THREADS
      Py_DECREF(d);
      PyMem_Free(name);
      return NULL;
    }
    for (;;) {
        errno = 0;
        Py_BEGIN_ALLOW_THREADS
        ep = readdir(dirp);
        Py_END_ALLOW_THREADS
        if (ep == NULL) {
            if ((errno == 0) || (errno == EISDIR)) {
                break;
            } else {
                Py_BEGIN_ALLOW_THREADS
                closedir(dirp);
                Py_END_ALLOW_THREADS
                Py_DECREF(d);
                return posix_error_with_allocated_filename(name);
            }
        }
        if (ep->FileName[0] == L'.' &&
            (NAMLEN(ep) == 1 ||
             (ep->FileName[1] == L'.' && NAMLEN(ep) == 2)))
            continue;
        if(wcstombs(MBname, ep->FileName, NAME_MAX) == -1) {
          free(MBname);
          Py_BEGIN_ALLOW_THREADS
          closedir(dirp);
          Py_END_ALLOW_THREADS
          Py_DECREF(d);
          PyMem_Free(name);
          return NULL;
        }
        v = PyString_FromStringAndSize(MBname, strlen(MBname));
        if (v == NULL) {
            Py_DECREF(d);
            d = NULL;
            break;
        }
#ifdef Py_USING_UNICODE
        if (arg_is_unicode) {
            PyObject *w;

            w = PyUnicode_FromEncodedObject(v,
                                            Py_FileSystemDefaultEncoding,
                                            "strict");
            if (w != NULL) {
                Py_DECREF(v);
                v = w;
            }
            else {
                /* fall back to the original byte string, as
                   discussed in patch #683592 */
                PyErr_Clear();
            }
        }
#endif
        if (PyList_Append(d, v) != 0) {
            Py_DECREF(v);
            Py_DECREF(d);
            d = NULL;
            break;
        }
        Py_DECREF(v);
    }
    Py_BEGIN_ALLOW_THREADS
    closedir(dirp);
    Py_END_ALLOW_THREADS
    PyMem_Free(name);
    if(MBname != NULL) {
      free(MBname);
    }

    return d;

}  /* end of posix_listdir */

#ifdef MS_WINDOWS
/* A helper function for abspath on win32 */
static PyObject *
posix__getfullpathname(PyObject *self, PyObject *args)
{
    /* assume encoded strings won't more than double no of chars */
    char inbuf[MAX_PATH*2];
    char *inbufp = inbuf;
    Py_ssize_t insize = sizeof(inbuf);
    char outbuf[MAX_PATH*2];
    char *temp;

    PyUnicodeObject *po;
    if (PyArg_ParseTuple(args, "U|:_getfullpathname", &po)) {
        Py_UNICODE *wpath = PyUnicode_AS_UNICODE(po);
        Py_UNICODE woutbuf[MAX_PATH*2], *woutbufp = woutbuf;
        Py_UNICODE *wtemp;
        DWORD result;
        PyObject *v;
        result = GetFullPathNameW(wpath,
                                  sizeof(woutbuf)/sizeof(woutbuf[0]),
                                  woutbuf, &wtemp);
        if (result > sizeof(woutbuf)/sizeof(woutbuf[0])) {
            woutbufp = malloc(result * sizeof(Py_UNICODE));
            if (!woutbufp)
                return PyErr_NoMemory();
            result = GetFullPathNameW(wpath, result, woutbufp, &wtemp);
        }
        if (result)
            v = PyUnicode_FromUnicode(woutbufp, wcslen(woutbufp));
        else
            v = win32_error_unicode("GetFullPathNameW", wpath);
        if (woutbufp != woutbuf)
            free(woutbufp);
        return v;
    }
    /* Drop the argument parsing error as narrow strings
       are also valid. */
    PyErr_Clear();

    if (!PyArg_ParseTuple (args, "et#:_getfullpathname",
                           Py_FileSystemDefaultEncoding, &inbufp,
                           &insize))
        return NULL;
    if (!GetFullPathName(inbuf, sizeof(outbuf)/sizeof(outbuf[0]),
                         outbuf, &temp))
        return win32_error("GetFullPathName", inbuf);
    if (PyUnicode_Check(PyTuple_GetItem(args, 0))) {
        return PyUnicode_Decode(outbuf, strlen(outbuf),
                                Py_FileSystemDefaultEncoding, NULL);
    }
    return PyString_FromString(outbuf);
} /* end of posix__getfullpathname */
#endif /* MS_WINDOWS */

PyDoc_STRVAR(posix_mkdir__doc__,
"mkdir(path [, mode=0777])\n\n\
Create a directory.");

static PyObject *
posix_mkdir(PyObject *self, PyObject *args)
{
    int res;
    char *path = NULL;
    int mode = 0777;

    if (!PyArg_ParseTuple(args, "et|i:mkdir",
                          Py_FileSystemDefaultEncoding, &path, &mode))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = mkdir(path, mode);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error_with_allocated_filename(path);
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
}


/* sys/resource.h is needed for at least: wait3(), wait4(), broken nice. */
#if defined(HAVE_SYS_RESOURCE_H)
#include <sys/resource.h>
#endif


#ifdef HAVE_NICE
PyDoc_STRVAR(posix_nice__doc__,
"nice(inc) -> new_priority\n\n\
Decrease the priority of process by inc and return the new priority.");

static PyObject *
posix_nice(PyObject *self, PyObject *args)
{
    int increment, value;

    if (!PyArg_ParseTuple(args, "i:nice", &increment))
        return NULL;

    /* There are two flavours of 'nice': one that returns the new
       priority (as required by almost all standards out there) and the
       Linux/FreeBSD/BSDI one, which returns '0' on success and advices
       the use of getpriority() to get the new priority.

       If we are of the nice family that returns the new priority, we
       need to clear errno before the call, and check if errno is filled
       before calling posix_error() on a returnvalue of -1, because the
       -1 may be the actual new priority! */

    errno = 0;
    value = nice(increment);
#if defined(HAVE_BROKEN_NICE) && defined(HAVE_GETPRIORITY)
    if (value == 0)
        value = getpriority(PRIO_PROCESS, 0);
#endif
    if (value == -1 && errno != 0)
        /* either nice() or getpriority() returned an error */
        return posix_error();
    return PyInt_FromLong((long) value);
}
#endif /* HAVE_NICE */

PyDoc_STRVAR(posix_rename__doc__,
"rename(old, new)\n\n\
Rename a file or directory.");

static PyObject *
posix_rename(PyObject *self, PyObject *args)
{
    return posix_2str(args, "etet:rename", rename);
}


PyDoc_STRVAR(posix_rmdir__doc__,
"rmdir(path)\n\n\
Remove a directory.");

static PyObject *
posix_rmdir(PyObject *self, PyObject *args)
{
    return posix_1str(args, "et:rmdir", rmdir);
}


PyDoc_STRVAR(posix_stat__doc__,
"stat(path) -> stat result\n\n\
Perform a stat system call on the given path.");

static PyObject *
posix_stat(PyObject *self, PyObject *args)
{
    return posix_do_stat(self, args, "et:stat", STAT, NULL, NULL);
}


#ifdef HAVE_SYSTEM
PyDoc_STRVAR(posix_system__doc__,
"system(command) -> exit_status\n\n\
Execute the command (a string) in a subshell.");

static PyObject *
posix_system(PyObject *self, PyObject *args)
{
    char *command;
    long sts;
    if (!PyArg_ParseTuple(args, "s:system", &command))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    sts = system(command);
    Py_END_ALLOW_THREADS
    return PyInt_FromLong(sts);
}
#endif


PyDoc_STRVAR(posix_umask__doc__,
"umask(new_mask) -> old_mask\n\n\
Set the current numeric umask and return the previous umask.");

static PyObject *
posix_umask(PyObject *self, PyObject *args)
{
    int i;
    if (!PyArg_ParseTuple(args, "i:umask", &i))
        return NULL;
    i = (int)umask(i);
    if (i < 0)
        return posix_error();
    return PyInt_FromLong((long)i);
}


PyDoc_STRVAR(posix_unlink__doc__,
"unlink(path)\n\n\
Remove a file (same as remove(path)).");

PyDoc_STRVAR(posix_remove__doc__,
"remove(path)\n\n\
Remove a file (same as unlink(path)).");

static PyObject *
posix_unlink(PyObject *self, PyObject *args)
{
    return posix_1str(args, "et:remove", unlink);
}


static int
extract_time(PyObject *t, time_t* sec, long* usec)
{
    time_t intval;
    if (PyFloat_Check(t)) {
        double tval = PyFloat_AsDouble(t);
        PyObject *intobj = PyNumber_Long(t);
        if (!intobj)
            return -1;
#if SIZEOF_TIME_T > SIZEOF_LONG
        intval = PyInt_AsUnsignedLongLongMask(intobj);
#else
        intval = PyInt_AsLong(intobj);
#endif
        Py_DECREF(intobj);
        if (intval == -1 && PyErr_Occurred())
            return -1;
        *sec = intval;
        *usec = (long)((tval - intval) * 1e6); /* can't exceed 1000000 */
        if (*usec < 0)
            /* If rounding gave us a negative number,
               truncate.  */
            *usec = 0;
        return 0;
    }
#if SIZEOF_TIME_T > SIZEOF_LONG
    intval = PyInt_AsUnsignedLongLongMask(t);
#else
    intval = PyInt_AsLong(t);
#endif
    if (intval == -1 && PyErr_Occurred())
        return -1;
    *sec = intval;
    *usec = 0;
    return 0;
}

PyDoc_STRVAR(posix_utime__doc__,
"utime(path, (atime, mtime))\n\
utime(path, None)\n\n\
Set the access and modified time of the file to the given values.  If the\n\
second form is used, set the access and modified times to the current time.");

static PyObject *
posix_utime(PyObject *self, PyObject *args)
{
    char *path = NULL;
    time_t atime, mtime;
    long ausec, musec;
    int res;
    PyObject* arg;

#if defined(HAVE_UTIMES)
    struct timeval buf[2];
#define ATIME buf[0].tv_sec
#define MTIME buf[1].tv_sec
#elif defined(HAVE_UTIME_H)
/* XXX should define struct utimbuf instead, above */
    struct utimbuf buf;
#define ATIME buf.actime
#define MTIME buf.modtime
#define UTIME_ARG &buf
#else /* HAVE_UTIMES */
    time_t buf[2];
#define ATIME buf[0]
#define MTIME buf[1]
#define UTIME_ARG buf
#endif /* HAVE_UTIMES */


    if (!PyArg_ParseTuple(args, "etO:utime",
                          Py_FileSystemDefaultEncoding, &path, &arg))
        return NULL;
    if (arg == Py_None) {
        /* optional time values not given */
        Py_BEGIN_ALLOW_THREADS
        res = utime(path, NULL);
        Py_END_ALLOW_THREADS
    }
    else if (!PyTuple_Check(arg) || PyTuple_Size(arg) != 2) {
        PyErr_SetString(PyExc_TypeError,
                        "utime() arg 2 must be a tuple (atime, mtime)");
        PyMem_Free(path);
        return NULL;
    }
    else {
        if (extract_time(PyTuple_GET_ITEM(arg, 0),
                         &atime, &ausec) == -1) {
            PyMem_Free(path);
            return NULL;
        }
        if (extract_time(PyTuple_GET_ITEM(arg, 1),
                         &mtime, &musec) == -1) {
            PyMem_Free(path);
            return NULL;
        }
        ATIME = atime;
        MTIME = mtime;
#ifdef HAVE_UTIMES
        buf[0].tv_usec = ausec;
        buf[1].tv_usec = musec;
        Py_BEGIN_ALLOW_THREADS
        res = utimes(path, buf);
        Py_END_ALLOW_THREADS
#else
        Py_BEGIN_ALLOW_THREADS
        res = utime(path, UTIME_ARG);
        Py_END_ALLOW_THREADS
#endif /* HAVE_UTIMES */
    }
    if (res < 0) {
        return posix_error_with_allocated_filename(path);
    }
    PyMem_Free(path);
    Py_INCREF(Py_None);
    return Py_None;
#undef UTIME_ARG
#undef ATIME
#undef MTIME
}


/* Process operations */

PyDoc_STRVAR(posix__exit__doc__,
"_exit(status)\n\n\
Exit to the system with specified status, without normal exit processing.");

static PyObject *
posix__exit(PyObject *self, PyObject *args)
{
    int sts;
    if (!PyArg_ParseTuple(args, "i:_exit", &sts))
        return NULL;
    _Exit(sts);
    return NULL; /* Make gcc -Wall happy */
}

#if defined(HAVE_EXECV) || defined(HAVE_SPAWNV)
static void
free_string_array(char **array, Py_ssize_t count)
{
    Py_ssize_t i;
    for (i = 0; i < count; i++)
        PyMem_Free(array[i]);
    PyMem_DEL(array);
}
#endif


#ifdef HAVE_EXECV
PyDoc_STRVAR(posix_execv__doc__,
"execv(path, args)\n\n\
Execute an executable path with arguments, replacing current process.\n\
\n\
    path: path of executable file\n\
    args: tuple or list of strings");

static PyObject *
posix_execv(PyObject *self, PyObject *args)
{
    char *path;
    PyObject *argv;
    char **argvlist;
    Py_ssize_t i, argc;
    PyObject *(*getitem)(PyObject *, Py_ssize_t);

    /* execv has two arguments: (path, argv), where
       argv is a list or tuple of strings. */

    if (!PyArg_ParseTuple(args, "etO:execv",
                          Py_FileSystemDefaultEncoding,
                          &path, &argv))
        return NULL;
    if (PyList_Check(argv)) {
        argc = PyList_Size(argv);
        getitem = PyList_GetItem;
    }
    else if (PyTuple_Check(argv)) {
        argc = PyTuple_Size(argv);
        getitem = PyTuple_GetItem;
    }
    else {
        PyErr_SetString(PyExc_TypeError, "execv() arg 2 must be a tuple or list");
        PyMem_Free(path);
        return NULL;
    }
    if (argc < 1) {
        PyErr_SetString(PyExc_ValueError, "execv() arg 2 must not be empty");
        PyMem_Free(path);
        return NULL;
    }

    argvlist = PyMem_NEW(char *, argc+1);
    if (argvlist == NULL) {
        PyMem_Free(path);
        return PyErr_NoMemory();
    }
    for (i = 0; i < argc; i++) {
        if (!PyArg_Parse((*getitem)(argv, i), "et",
                         Py_FileSystemDefaultEncoding,
                         &argvlist[i])) {
            free_string_array(argvlist, i);
            PyErr_SetString(PyExc_TypeError,
                            "execv() arg 2 must contain only strings");
            PyMem_Free(path);
            return NULL;

        }
    }
    argvlist[argc] = NULL;

    execv(path, argvlist);

    /* If we get here it's definitely an error */

    free_string_array(argvlist, argc);
    PyMem_Free(path);
    return posix_error();
}


PyDoc_STRVAR(posix_execve__doc__,
"execve(path, args, env)\n\n\
Execute a path with arguments and environment, replacing current process.\n\
\n\
    path: path of executable file\n\
    args: tuple or list of arguments\n\
    env: dictionary of strings mapping to strings");

static PyObject *
posix_execve(PyObject *self, PyObject *args)
{
    char *path;
    PyObject *argv, *env;
    char **argvlist;
    char **envlist;
    PyObject *key, *val, *keys=NULL, *vals=NULL;
    Py_ssize_t i, pos, argc, envc;
    PyObject *(*getitem)(PyObject *, Py_ssize_t);
    Py_ssize_t lastarg = 0;

    /* execve has three arguments: (path, argv, env), where
       argv is a list or tuple of strings and env is a dictionary
       like posix.environ. */

    if (!PyArg_ParseTuple(args, "etOO:execve",
                          Py_FileSystemDefaultEncoding,
                          &path, &argv, &env))
        return NULL;
    if (PyList_Check(argv)) {
        argc = PyList_Size(argv);
        getitem = PyList_GetItem;
    }
    else if (PyTuple_Check(argv)) {
        argc = PyTuple_Size(argv);
        getitem = PyTuple_GetItem;
    }
    else {
        PyErr_SetString(PyExc_TypeError,
                        "execve() arg 2 must be a tuple or list");
        goto fail_0;
    }
    if (!PyMapping_Check(env)) {
        PyErr_SetString(PyExc_TypeError,
                        "execve() arg 3 must be a mapping object");
        goto fail_0;
    }

    argvlist = PyMem_NEW(char *, argc+1);
    if (argvlist == NULL) {
        PyErr_NoMemory();
        goto fail_0;
    }
    for (i = 0; i < argc; i++) {
        if (!PyArg_Parse((*getitem)(argv, i),
                         "et;execve() arg 2 must contain only strings",
                         Py_FileSystemDefaultEncoding,
                         &argvlist[i]))
        {
            lastarg = i;
            goto fail_1;
        }
    }
    lastarg = argc;
    argvlist[argc] = NULL;

    i = PyMapping_Size(env);
    if (i < 0)
        goto fail_1;
    envlist = PyMem_NEW(char *, i + 1);
    if (envlist == NULL) {
        PyErr_NoMemory();
        goto fail_1;
    }
    envc = 0;
    keys = PyMapping_Keys(env);
    vals = PyMapping_Values(env);
    if (!keys || !vals)
        goto fail_2;
    if (!PyList_Check(keys) || !PyList_Check(vals)) {
        PyErr_SetString(PyExc_TypeError,
                        "execve(): env.keys() or env.values() is not a list");
        goto fail_2;
    }

    for (pos = 0; pos < i; pos++) {
        char *p, *k, *v;
        size_t len;

        key = PyList_GetItem(keys, pos);
        val = PyList_GetItem(vals, pos);
        if (!key || !val)
            goto fail_2;

        if (!PyArg_Parse(
                    key,
                    "s;execve() arg 3 contains a non-string key",
                    &k) ||
            !PyArg_Parse(
                val,
                "s;execve() arg 3 contains a non-string value",
                &v))
        {
            goto fail_2;
        }

#if defined(PYOS_OS2)
        /* Omit Pseudo-Env Vars that Would Confuse Programs if Passed On */
        if (stricmp(k, "BEGINLIBPATH") != 0 && stricmp(k, "ENDLIBPATH") != 0) {
#endif
        len = PyString_Size(key) + PyString_Size(val) + 2;
        p = PyMem_NEW(char, len);
        if (p == NULL) {
            PyErr_NoMemory();
            goto fail_2;
        }
        PyOS_snprintf(p, len, "%s=%s", k, v);
        envlist[envc++] = p;
#if defined(PYOS_OS2)
        }
#endif
    }
    envlist[envc] = 0;

    execve(path, argvlist, envlist);

    /* If we get here it's definitely an error */

    (void) posix_error();

  fail_2:
    while (--envc >= 0)
        PyMem_DEL(envlist[envc]);
    PyMem_DEL(envlist);
  fail_1:
    free_string_array(argvlist, lastarg);
    Py_XDECREF(vals);
    Py_XDECREF(keys);
  fail_0:
    PyMem_Free(path);
    return NULL;
}
#endif /* HAVE_EXECV */


#ifdef HAVE_SPAWNV
PyDoc_STRVAR(posix_spawnv__doc__,
"spawnv(mode, path, args)\n\n\
Execute the program 'path' in a new process.\n\
\n\
    mode: mode of process creation\n\
    path: path of executable file\n\
    args: tuple or list of strings");

static PyObject *
posix_spawnv(PyObject *self, PyObject *args)
{
    char *path;
    PyObject *argv;
    char **argvlist;
    int mode, i;
    Py_ssize_t argc;
    Py_intptr_t spawnval;
    PyObject *(*getitem)(PyObject *, Py_ssize_t);

    /* spawnv has three arguments: (mode, path, argv), where
       argv is a list or tuple of strings. */

    if (!PyArg_ParseTuple(args, "ietO:spawnv", &mode,
                          Py_FileSystemDefaultEncoding,
                          &path, &argv))
        return NULL;
    if (PyList_Check(argv)) {
        argc = PyList_Size(argv);
        getitem = PyList_GetItem;
    }
    else if (PyTuple_Check(argv)) {
        argc = PyTuple_Size(argv);
        getitem = PyTuple_GetItem;
    }
    else {
        PyErr_SetString(PyExc_TypeError,
                        "spawnv() arg 2 must be a tuple or list");
        PyMem_Free(path);
        return NULL;
    }

    argvlist = PyMem_NEW(char *, argc+1);
    if (argvlist == NULL) {
        PyMem_Free(path);
        return PyErr_NoMemory();
    }
    for (i = 0; i < argc; i++) {
        if (!PyArg_Parse((*getitem)(argv, i), "et",
                         Py_FileSystemDefaultEncoding,
                         &argvlist[i])) {
            free_string_array(argvlist, i);
            PyErr_SetString(
                PyExc_TypeError,
                "spawnv() arg 2 must contain only strings");
            PyMem_Free(path);
            return NULL;
        }
    }
    argvlist[argc] = NULL;

#if defined(PYOS_OS2) && defined(PYCC_GCC)
    Py_BEGIN_ALLOW_THREADS
    spawnval = spawnv(mode, path, argvlist);
    Py_END_ALLOW_THREADS
#else
    if (mode == _OLD_P_OVERLAY)
        mode = _P_OVERLAY;

    Py_BEGIN_ALLOW_THREADS
    spawnval = _spawnv(mode, path, argvlist);
    Py_END_ALLOW_THREADS
#endif

    free_string_array(argvlist, argc);
    PyMem_Free(path);

    if (spawnval == -1)
        return posix_error();
    else
#if SIZEOF_LONG == SIZEOF_VOID_P
        return Py_BuildValue("l", (long) spawnval);
#else
        return Py_BuildValue("L", (PY_LONG_LONG) spawnval);
#endif
}


PyDoc_STRVAR(posix_spawnve__doc__,
"spawnve(mode, path, args, env)\n\n\
Execute the program 'path' in a new process.\n\
\n\
    mode: mode of process creation\n\
    path: path of executable file\n\
    args: tuple or list of arguments\n\
    env: dictionary of strings mapping to strings");

static PyObject *
posix_spawnve(PyObject *self, PyObject *args)
{
    char *path;
    PyObject *argv, *env;
    char **argvlist;
    char **envlist;
    PyObject *key, *val, *keys=NULL, *vals=NULL, *res=NULL;
    int mode, pos, envc;
    Py_ssize_t argc, i;
    Py_intptr_t spawnval;
    PyObject *(*getitem)(PyObject *, Py_ssize_t);
    Py_ssize_t lastarg = 0;

    /* spawnve has four arguments: (mode, path, argv, env), where
       argv is a list or tuple of strings and env is a dictionary
       like posix.environ. */

    if (!PyArg_ParseTuple(args, "ietOO:spawnve", &mode,
                          Py_FileSystemDefaultEncoding,
                          &path, &argv, &env))
        return NULL;
    if (PyList_Check(argv)) {
        argc = PyList_Size(argv);
        getitem = PyList_GetItem;
    }
    else if (PyTuple_Check(argv)) {
        argc = PyTuple_Size(argv);
        getitem = PyTuple_GetItem;
    }
    else {
        PyErr_SetString(PyExc_TypeError,
                        "spawnve() arg 2 must be a tuple or list");
        goto fail_0;
    }
    if (!PyMapping_Check(env)) {
        PyErr_SetString(PyExc_TypeError,
                        "spawnve() arg 3 must be a mapping object");
        goto fail_0;
    }

    argvlist = PyMem_NEW(char *, argc+1);
    if (argvlist == NULL) {
        PyErr_NoMemory();
        goto fail_0;
    }
    for (i = 0; i < argc; i++) {
        if (!PyArg_Parse((*getitem)(argv, i),
                     "et;spawnve() arg 2 must contain only strings",
                         Py_FileSystemDefaultEncoding,
                         &argvlist[i]))
        {
            lastarg = i;
            goto fail_1;
        }
    }
    lastarg = argc;
    argvlist[argc] = NULL;

    i = PyMapping_Size(env);
    if (i < 0)
        goto fail_1;
    envlist = PyMem_NEW(char *, i + 1);
    if (envlist == NULL) {
        PyErr_NoMemory();
        goto fail_1;
    }
    envc = 0;
    keys = PyMapping_Keys(env);
    vals = PyMapping_Values(env);
    if (!keys || !vals)
        goto fail_2;
    if (!PyList_Check(keys) || !PyList_Check(vals)) {
        PyErr_SetString(PyExc_TypeError,
                        "spawnve(): env.keys() or env.values() is not a list");
        goto fail_2;
    }

    for (pos = 0; pos < i; pos++) {
        char *p, *k, *v;
        size_t len;

        key = PyList_GetItem(keys, pos);
        val = PyList_GetItem(vals, pos);
        if (!key || !val)
            goto fail_2;

        if (!PyArg_Parse(
                    key,
                    "s;spawnve() arg 3 contains a non-string key",
                    &k) ||
            !PyArg_Parse(
                val,
                "s;spawnve() arg 3 contains a non-string value",
                &v))
        {
            goto fail_2;
        }
        len = PyString_Size(key) + PyString_Size(val) + 2;
        p = PyMem_NEW(char, len);
        if (p == NULL) {
            PyErr_NoMemory();
            goto fail_2;
        }
        PyOS_snprintf(p, len, "%s=%s", k, v);
        envlist[envc++] = p;
    }
    envlist[envc] = 0;

#if defined(PYOS_OS2) && defined(PYCC_GCC)
    Py_BEGIN_ALLOW_THREADS
    spawnval = spawnve(mode, path, argvlist, envlist);
    Py_END_ALLOW_THREADS
#else
    if (mode == _OLD_P_OVERLAY)
        mode = _P_OVERLAY;

    Py_BEGIN_ALLOW_THREADS
    spawnval = _spawnve(mode, path, argvlist, envlist);
    Py_END_ALLOW_THREADS
#endif

    if (spawnval == -1)
        (void) posix_error();
    else
#if SIZEOF_LONG == SIZEOF_VOID_P
        res = Py_BuildValue("l", (long) spawnval);
#else
        res = Py_BuildValue("L", (PY_LONG_LONG) spawnval);
#endif

  fail_2:
    while (--envc >= 0)
        PyMem_DEL(envlist[envc]);
    PyMem_DEL(envlist);
  fail_1:
    free_string_array(argvlist, lastarg);
    Py_XDECREF(vals);
    Py_XDECREF(keys);
  fail_0:
    PyMem_Free(path);
    return res;
}

/* OS/2 supports spawnvp & spawnvpe natively */
#if defined(PYOS_OS2)
PyDoc_STRVAR(posix_spawnvp__doc__,
"spawnvp(mode, file, args)\n\n\
Execute the program 'file' in a new process, using the environment\n\
search path to find the file.\n\
\n\
    mode: mode of process creation\n\
    file: executable file name\n\
    args: tuple or list of strings");

static PyObject *
posix_spawnvp(PyObject *self, PyObject *args)
{
    char *path;
    PyObject *argv;
    char **argvlist;
    int mode, i, argc;
    Py_intptr_t spawnval;
    PyObject *(*getitem)(PyObject *, Py_ssize_t);

    /* spawnvp has three arguments: (mode, path, argv), where
       argv is a list or tuple of strings. */

    if (!PyArg_ParseTuple(args, "ietO:spawnvp", &mode,
                          Py_FileSystemDefaultEncoding,
                          &path, &argv))
        return NULL;
    if (PyList_Check(argv)) {
        argc = PyList_Size(argv);
        getitem = PyList_GetItem;
    }
    else if (PyTuple_Check(argv)) {
        argc = PyTuple_Size(argv);
        getitem = PyTuple_GetItem;
    }
    else {
        PyErr_SetString(PyExc_TypeError,
                        "spawnvp() arg 2 must be a tuple or list");
        PyMem_Free(path);
        return NULL;
    }

    argvlist = PyMem_NEW(char *, argc+1);
    if (argvlist == NULL) {
        PyMem_Free(path);
        return PyErr_NoMemory();
    }
    for (i = 0; i < argc; i++) {
        if (!PyArg_Parse((*getitem)(argv, i), "et",
                         Py_FileSystemDefaultEncoding,
                         &argvlist[i])) {
            free_string_array(argvlist, i);
            PyErr_SetString(
                PyExc_TypeError,
                "spawnvp() arg 2 must contain only strings");
            PyMem_Free(path);
            return NULL;
        }
    }
    argvlist[argc] = NULL;

    Py_BEGIN_ALLOW_THREADS
#if defined(PYCC_GCC)
    spawnval = spawnvp(mode, path, argvlist);
#else
    spawnval = _spawnvp(mode, path, argvlist);
#endif
    Py_END_ALLOW_THREADS

    free_string_array(argvlist, argc);
    PyMem_Free(path);

    if (spawnval == -1)
        return posix_error();
    else
        return Py_BuildValue("l", (long) spawnval);
}


PyDoc_STRVAR(posix_spawnvpe__doc__,
"spawnvpe(mode, file, args, env)\n\n\
Execute the program 'file' in a new process, using the environment\n\
search path to find the file.\n\
\n\
    mode: mode of process creation\n\
    file: executable file name\n\
    args: tuple or list of arguments\n\
    env: dictionary of strings mapping to strings");

static PyObject *
posix_spawnvpe(PyObject *self, PyObject *args)
{
    char *path;
    PyObject *argv, *env;
    char **argvlist;
    char **envlist;
    PyObject *key, *val, *keys=NULL, *vals=NULL, *res=NULL;
    int mode, i, pos, argc, envc;
    Py_intptr_t spawnval;
    PyObject *(*getitem)(PyObject *, Py_ssize_t);
    int lastarg = 0;

    /* spawnvpe has four arguments: (mode, path, argv, env), where
       argv is a list or tuple of strings and env is a dictionary
       like posix.environ. */

    if (!PyArg_ParseTuple(args, "ietOO:spawnvpe", &mode,
                          Py_FileSystemDefaultEncoding,
                          &path, &argv, &env))
        return NULL;
    if (PyList_Check(argv)) {
        argc = PyList_Size(argv);
        getitem = PyList_GetItem;
    }
    else if (PyTuple_Check(argv)) {
        argc = PyTuple_Size(argv);
        getitem = PyTuple_GetItem;
    }
    else {
        PyErr_SetString(PyExc_TypeError,
                        "spawnvpe() arg 2 must be a tuple or list");
        goto fail_0;
    }
    if (!PyMapping_Check(env)) {
        PyErr_SetString(PyExc_TypeError,
                        "spawnvpe() arg 3 must be a mapping object");
        goto fail_0;
    }

    argvlist = PyMem_NEW(char *, argc+1);
    if (argvlist == NULL) {
        PyErr_NoMemory();
        goto fail_0;
    }
    for (i = 0; i < argc; i++) {
        if (!PyArg_Parse((*getitem)(argv, i),
                     "et;spawnvpe() arg 2 must contain only strings",
                         Py_FileSystemDefaultEncoding,
                         &argvlist[i]))
        {
            lastarg = i;
            goto fail_1;
        }
    }
    lastarg = argc;
    argvlist[argc] = NULL;

    i = PyMapping_Size(env);
    if (i < 0)
        goto fail_1;
    envlist = PyMem_NEW(char *, i + 1);
    if (envlist == NULL) {
        PyErr_NoMemory();
        goto fail_1;
    }
    envc = 0;
    keys = PyMapping_Keys(env);
    vals = PyMapping_Values(env);
    if (!keys || !vals)
        goto fail_2;
    if (!PyList_Check(keys) || !PyList_Check(vals)) {
        PyErr_SetString(PyExc_TypeError,
                        "spawnvpe(): env.keys() or env.values() is not a list");
        goto fail_2;
    }

    for (pos = 0; pos < i; pos++) {
        char *p, *k, *v;
        size_t len;

        key = PyList_GetItem(keys, pos);
        val = PyList_GetItem(vals, pos);
        if (!key || !val)
            goto fail_2;

        if (!PyArg_Parse(
                    key,
                    "s;spawnvpe() arg 3 contains a non-string key",
                    &k) ||
            !PyArg_Parse(
                val,
                "s;spawnvpe() arg 3 contains a non-string value",
                &v))
        {
            goto fail_2;
        }
        len = PyString_Size(key) + PyString_Size(val) + 2;
        p = PyMem_NEW(char, len);
        if (p == NULL) {
            PyErr_NoMemory();
            goto fail_2;
        }
        PyOS_snprintf(p, len, "%s=%s", k, v);
        envlist[envc++] = p;
    }
    envlist[envc] = 0;

    Py_BEGIN_ALLOW_THREADS
#if defined(PYCC_GCC)
    spawnval = spawnvpe(mode, path, argvlist, envlist);
#else
    spawnval = _spawnvpe(mode, path, argvlist, envlist);
#endif
    Py_END_ALLOW_THREADS

    if (spawnval == -1)
        (void) posix_error();
    else
        res = Py_BuildValue("l", (long) spawnval);

  fail_2:
    while (--envc >= 0)
        PyMem_DEL(envlist[envc]);
    PyMem_DEL(envlist);
  fail_1:
    free_string_array(argvlist, lastarg);
    Py_XDECREF(vals);
    Py_XDECREF(keys);
  fail_0:
    PyMem_Free(path);
    return res;
}
#endif /* PYOS_OS2 */
#endif /* HAVE_SPAWNV */


#ifdef HAVE_FORK1
PyDoc_STRVAR(posix_fork1__doc__,
"fork1() -> pid\n\n\
Fork a child process with a single multiplexed (i.e., not bound) thread.\n\
\n\
Return 0 to child process and PID of child to parent process.");

static PyObject *
posix_fork1(PyObject *self, PyObject *noargs)
{
    pid_t pid;
    int result = 0;
    _PyImport_AcquireLock();
    pid = fork1();
    if (pid == 0) {
        /* child: this clobbers and resets the import lock. */
        PyOS_AfterFork();
    } else {
        /* parent: release the import lock. */
        result = _PyImport_ReleaseLock();
    }
    if (pid == -1)
        return posix_error();
    if (result < 0) {
        /* Don't clobber the OSError if the fork failed. */
        PyErr_SetString(PyExc_RuntimeError,
                        "not holding the import lock");
        return NULL;
    }
    return PyLong_FromPid(pid);
}
#endif


#ifdef HAVE_FORK
PyDoc_STRVAR(posix_fork__doc__,
"fork() -> pid\n\n\
Fork a child process.\n\
Return 0 to child process and PID of child to parent process.");

static PyObject *
posix_fork(PyObject *self, PyObject *noargs)
{
    pid_t pid;
    int result = 0;
    _PyImport_AcquireLock();
    pid = fork();
    if (pid == 0) {
        /* child: this clobbers and resets the import lock. */
        PyOS_AfterFork();
    } else {
        /* parent: release the import lock. */
        result = _PyImport_ReleaseLock();
    }
    if (pid == -1)
        return posix_error();
    if (result < 0) {
        /* Don't clobber the OSError if the fork failed. */
        PyErr_SetString(PyExc_RuntimeError,
                        "not holding the import lock");
        return NULL;
    }
    return PyLong_FromPid(pid);
}
#endif

/* AIX uses /dev/ptc but is otherwise the same as /dev/ptmx */
/* IRIX has both /dev/ptc and /dev/ptmx, use ptmx */
#if defined(HAVE_DEV_PTC) && !defined(HAVE_DEV_PTMX)
#define DEV_PTY_FILE "/dev/ptc"
#define HAVE_DEV_PTMX
#else
#define DEV_PTY_FILE "/dev/ptmx"
#endif

#if defined(HAVE_OPENPTY) || defined(HAVE_FORKPTY) || defined(HAVE_DEV_PTMX)
#ifdef HAVE_PTY_H
#include <pty.h>
#else
#ifdef HAVE_LIBUTIL_H
#include <libutil.h>
#else
#ifdef HAVE_UTIL_H
#include <util.h>
#endif /* HAVE_UTIL_H */
#endif /* HAVE_LIBUTIL_H */
#endif /* HAVE_PTY_H */
#ifdef HAVE_STROPTS_H
#include <stropts.h>
#endif
#endif /* defined(HAVE_OPENPTY) || defined(HAVE_FORKPTY) || defined(HAVE_DEV_PTMX */

#if defined(HAVE_OPENPTY) || defined(HAVE__GETPTY) || defined(HAVE_DEV_PTMX)
PyDoc_STRVAR(posix_openpty__doc__,
"openpty() -> (master_fd, slave_fd)\n\n\
Open a pseudo-terminal, returning open fd's for both master and slave end.\n");

static PyObject *
posix_openpty(PyObject *self, PyObject *noargs)
{
    int master_fd, slave_fd;
#ifndef HAVE_OPENPTY
    char * slave_name;
#endif
#if defined(HAVE_DEV_PTMX) && !defined(HAVE_OPENPTY) && !defined(HAVE__GETPTY)
    PyOS_sighandler_t sig_saved;
#ifdef sun
    extern char *ptsname(int fildes);
#endif
#endif

#ifdef HAVE_OPENPTY
    if (openpty(&master_fd, &slave_fd, NULL, NULL, NULL) != 0)
        return posix_error();
#elif defined(HAVE__GETPTY)
    slave_name = _getpty(&master_fd, O_RDWR, 0666, 0);
    if (slave_name == NULL)
        return posix_error();

    slave_fd = open(slave_name, O_RDWR);
    if (slave_fd < 0)
        return posix_error();
#else
    master_fd = open(DEV_PTY_FILE, O_RDWR | O_NOCTTY); /* open master */
    if (master_fd < 0)
        return posix_error();
    sig_saved = PyOS_setsig(SIGCHLD, SIG_DFL);
    /* change permission of slave */
    if (grantpt(master_fd) < 0) {
        PyOS_setsig(SIGCHLD, sig_saved);
        return posix_error();
    }
    /* unlock slave */
    if (unlockpt(master_fd) < 0) {
        PyOS_setsig(SIGCHLD, sig_saved);
        return posix_error();
    }
    PyOS_setsig(SIGCHLD, sig_saved);
    slave_name = ptsname(master_fd); /* get name of slave */
    if (slave_name == NULL)
        return posix_error();
    slave_fd = open(slave_name, O_RDWR | O_NOCTTY); /* open slave */
    if (slave_fd < 0)
        return posix_error();
#if !defined(__CYGWIN__) && !defined(HAVE_DEV_PTC)
    ioctl(slave_fd, I_PUSH, "ptem"); /* push ptem */
    ioctl(slave_fd, I_PUSH, "ldterm"); /* push ldterm */
#ifndef __hpux
    ioctl(slave_fd, I_PUSH, "ttcompat"); /* push ttcompat */
#endif /* __hpux */
#endif /* HAVE_CYGWIN */
#endif /* HAVE_OPENPTY */

    return Py_BuildValue("(ii)", master_fd, slave_fd);

}
#endif /* defined(HAVE_OPENPTY) || defined(HAVE__GETPTY) || defined(HAVE_DEV_PTMX) */

#ifdef HAVE_FORKPTY
PyDoc_STRVAR(posix_forkpty__doc__,
"forkpty() -> (pid, master_fd)\n\n\
Fork a new process with a new pseudo-terminal as controlling tty.\n\n\
Like fork(), return 0 as pid to child process, and PID of child to parent.\n\
To both, return fd of newly opened pseudo-terminal.\n");

static PyObject *
posix_forkpty(PyObject *self, PyObject *noargs)
{
    int master_fd = -1, result = 0;
    pid_t pid;

    _PyImport_AcquireLock();
    pid = forkpty(&master_fd, NULL, NULL, NULL);
    if (pid == 0) {
        /* child: this clobbers and resets the import lock. */
        PyOS_AfterFork();
    } else {
        /* parent: release the import lock. */
        result = _PyImport_ReleaseLock();
    }
    if (pid == -1)
        return posix_error();
    if (result < 0) {
        /* Don't clobber the OSError if the fork failed. */
        PyErr_SetString(PyExc_RuntimeError,
                        "not holding the import lock");
        return NULL;
    }
    return Py_BuildValue("(Ni)", PyLong_FromPid(pid), master_fd);
}
#endif

#ifdef HAVE_GETEGID
PyDoc_STRVAR(posix_getegid__doc__,
"getegid() -> egid\n\n\
Return the current process's effective group id.");

static PyObject *
posix_getegid(PyObject *self, PyObject *noargs)
{
    return PyInt_FromLong((long)getegid());
}
#endif


#ifdef HAVE_GETEUID
PyDoc_STRVAR(posix_geteuid__doc__,
"geteuid() -> euid\n\n\
Return the current process's effective user id.");

static PyObject *
posix_geteuid(PyObject *self, PyObject *noargs)
{
    return PyInt_FromLong((long)geteuid());
}
#endif


#ifdef HAVE_GETGID
PyDoc_STRVAR(posix_getgid__doc__,
"getgid() -> gid\n\n\
Return the current process's group id.");

static PyObject *
posix_getgid(PyObject *self, PyObject *noargs)
{
    return PyInt_FromLong((long)getgid());
}
#endif


PyDoc_STRVAR(posix_getpid__doc__,
"getpid() -> pid\n\n\
Return the current process id");

static PyObject *
posix_getpid(PyObject *self, PyObject *noargs)
{
    return PyLong_FromPid(getpid());
}


#ifdef HAVE_GETGROUPS
PyDoc_STRVAR(posix_getgroups__doc__,
"getgroups() -> list of group IDs\n\n\
Return list of supplemental group IDs for the process.");

static PyObject *
posix_getgroups(PyObject *self, PyObject *noargs)
{
    PyObject *result = NULL;

#ifdef NGROUPS_MAX
#define MAX_GROUPS NGROUPS_MAX
#else
    /* defined to be 16 on Solaris7, so this should be a small number */
#define MAX_GROUPS 64
#endif
    gid_t grouplist[MAX_GROUPS];

    /* On MacOSX getgroups(2) can return more than MAX_GROUPS results
     * This is a helper variable to store the intermediate result when
     * that happens.
     *
     * To keep the code readable the OSX behaviour is unconditional,
     * according to the POSIX spec this should be safe on all unix-y
     * systems.
     */
    gid_t* alt_grouplist = grouplist;
    int n;

    n = getgroups(MAX_GROUPS, grouplist);
    if (n < 0) {
        if (errno == EINVAL) {
            n = getgroups(0, NULL);
            if (n == -1) {
                return posix_error();
            }
            if (n == 0) {
                /* Avoid malloc(0) */
                alt_grouplist = grouplist;
            } else {
                alt_grouplist = PyMem_Malloc(n * sizeof(gid_t));
                if (alt_grouplist == NULL) {
                    errno = EINVAL;
                    return posix_error();
                }
                n = getgroups(n, alt_grouplist);
                if (n == -1) {
                    PyMem_Free(alt_grouplist);
                    return posix_error();
                }
            }
        } else {
            return posix_error();
        }
    }
    result = PyList_New(n);
    if (result != NULL) {
        int i;
        for (i = 0; i < n; ++i) {
            PyObject *o = PyInt_FromLong((long)alt_grouplist[i]);
            if (o == NULL) {
                Py_DECREF(result);
                result = NULL;
                break;
            }
            PyList_SET_ITEM(result, i, o);
        }
    }

    if (alt_grouplist != grouplist) {
        PyMem_Free(alt_grouplist);
    }

    return result;
}
#endif

#ifdef HAVE_INITGROUPS
PyDoc_STRVAR(posix_initgroups__doc__,
"initgroups(username, gid) -> None\n\n\
Call the system initgroups() to initialize the group access list with all of\n\
the groups of which the specified username is a member, plus the specified\n\
group id.");

static PyObject *
posix_initgroups(PyObject *self, PyObject *args)
{
    char *username;
    long gid;

    if (!PyArg_ParseTuple(args, "sl:initgroups", &username, &gid))
        return NULL;

    if (initgroups(username, (gid_t) gid) == -1)
        return PyErr_SetFromErrno(PyExc_OSError);

    Py_INCREF(Py_None);
    return Py_None;
}
#endif

#ifdef HAVE_GETPGID
PyDoc_STRVAR(posix_getpgid__doc__,
"getpgid(pid) -> pgid\n\n\
Call the system call getpgid().");

static PyObject *
posix_getpgid(PyObject *self, PyObject *args)
{
    pid_t pid, pgid;
    if (!PyArg_ParseTuple(args, PARSE_PID ":getpgid", &pid))
        return NULL;
    pgid = getpgid(pid);
    if (pgid < 0)
        return posix_error();
    return PyLong_FromPid(pgid);
}
#endif /* HAVE_GETPGID */


#ifdef HAVE_GETPGRP
PyDoc_STRVAR(posix_getpgrp__doc__,
"getpgrp() -> pgrp\n\n\
Return the current process group id.");

static PyObject *
posix_getpgrp(PyObject *self, PyObject *noargs)
{
#ifdef GETPGRP_HAVE_ARG
    return PyLong_FromPid(getpgrp(0));
#else /* GETPGRP_HAVE_ARG */
    return PyLong_FromPid(getpgrp());
#endif /* GETPGRP_HAVE_ARG */
}
#endif /* HAVE_GETPGRP */


#ifdef HAVE_SETPGRP
PyDoc_STRVAR(posix_setpgrp__doc__,
"setpgrp()\n\n\
Make this process the process group leader.");

static PyObject *
posix_setpgrp(PyObject *self, PyObject *noargs)
{
#ifdef SETPGRP_HAVE_ARG
    if (setpgrp(0, 0) < 0)
#else /* SETPGRP_HAVE_ARG */
    if (setpgrp() < 0)
#endif /* SETPGRP_HAVE_ARG */
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}

#endif /* HAVE_SETPGRP */

#ifdef HAVE_GETPPID
PyDoc_STRVAR(posix_getppid__doc__,
"getppid() -> ppid\n\n\
Return the parent's process id.");

static PyObject *
posix_getppid(PyObject *self, PyObject *noargs)
{
    return PyLong_FromPid(getppid());
}
#endif


#ifdef HAVE_GETLOGIN
PyDoc_STRVAR(posix_getlogin__doc__,
"getlogin() -> string\n\n\
Return the actual login name.");

static PyObject *
posix_getlogin(PyObject *self, PyObject *noargs)
{
    PyObject *result = NULL;
    char *name;
    int old_errno = errno;

    errno = 0;
    name = getlogin();
    if (name == NULL) {
        if (errno)
        posix_error();
        else
        PyErr_SetString(PyExc_OSError,
                        "unable to determine login name");
    }
    else
        result = PyString_FromString(name);
    errno = old_errno;

    return result;
}
#endif

#ifndef UEFI_C_SOURCE
PyDoc_STRVAR(posix_getuid__doc__,
"getuid() -> uid\n\n\
Return the current process's user id.");

static PyObject *
posix_getuid(PyObject *self, PyObject *noargs)
{
    return PyInt_FromLong((long)getuid());
}
#endif  /* UEFI_C_SOURCE */

#ifdef HAVE_KILL
PyDoc_STRVAR(posix_kill__doc__,
"kill(pid, sig)\n\n\
Kill a process with a signal.");

static PyObject *
posix_kill(PyObject *self, PyObject *args)
{
    pid_t pid;
    int sig;
    if (!PyArg_ParseTuple(args, PARSE_PID "i:kill", &pid, &sig))
        return NULL;
#if defined(PYOS_OS2) && !defined(PYCC_GCC)
    if (sig == XCPT_SIGNAL_INTR || sig == XCPT_SIGNAL_BREAK) {
        APIRET rc;
        if ((rc = DosSendSignalException(pid, sig)) != NO_ERROR)
            return os2_error(rc);

    } else if (sig == XCPT_SIGNAL_KILLPROC) {
        APIRET rc;
        if ((rc = DosKillProcess(DKP_PROCESS, pid)) != NO_ERROR)
            return os2_error(rc);

    } else
        return NULL; /* Unrecognized Signal Requested */
#else
    if (kill(pid, sig) == -1)
        return posix_error();
#endif
    Py_INCREF(Py_None);
    return Py_None;
}
#endif

#ifdef HAVE_KILLPG
PyDoc_STRVAR(posix_killpg__doc__,
"killpg(pgid, sig)\n\n\
Kill a process group with a signal.");

static PyObject *
posix_killpg(PyObject *self, PyObject *args)
{
    int sig;
    pid_t pgid;
    /* XXX some man pages make the `pgid` parameter an int, others
       a pid_t. Since getpgrp() returns a pid_t, we assume killpg should
       take the same type. Moreover, pid_t is always at least as wide as
       int (else compilation of this module fails), which is safe. */
    if (!PyArg_ParseTuple(args, PARSE_PID "i:killpg", &pgid, &sig))
        return NULL;
    if (killpg(pgid, sig) == -1)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif

#ifdef HAVE_PLOCK

#ifdef HAVE_SYS_LOCK_H
#include <sys/lock.h>
#endif

PyDoc_STRVAR(posix_plock__doc__,
"plock(op)\n\n\
Lock program segments into memory.");

static PyObject *
posix_plock(PyObject *self, PyObject *args)
{
    int op;
    if (!PyArg_ParseTuple(args, "i:plock", &op))
        return NULL;
    if (plock(op) == -1)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif


#ifdef HAVE_POPEN
PyDoc_STRVAR(posix_popen__doc__,
"popen(command [, mode='r' [, bufsize]]) -> pipe\n\n\
Open a pipe to/from a command returning a file object.");

#if defined(PYOS_OS2)
#if defined(PYCC_VACPP)
static int
async_system(const char *command)
{
    char errormsg[256], args[1024];
    RESULTCODES rcodes;
    APIRET rc;

    char *shell = getenv("COMSPEC");
    if (!shell)
        shell = "cmd";

    /* avoid overflowing the argument buffer */
    if (strlen(shell) + 3 + strlen(command) >= 1024)
        return ERROR_NOT_ENOUGH_MEMORY

    args[0] = '\0';
    strcat(args, shell);
    strcat(args, "/c ");
    strcat(args, command);

    /* execute asynchronously, inheriting the environment */
    rc = DosExecPgm(errormsg,
                    sizeof(errormsg),
                    EXEC_ASYNC,
                    args,
                    NULL,
                    &rcodes,
                    shell);
    return rc;
}

static FILE *
popen(const char *command, const char *mode, int pipesize, int *err)
{
    int oldfd, tgtfd;
    HFILE pipeh[2];
    APIRET rc;

    /* mode determines which of stdin or stdout is reconnected to
     * the pipe to the child
     */
    if (strchr(mode, 'r') != NULL) {
        tgt_fd = 1;             /* stdout */
    } else if (strchr(mode, 'w')) {
        tgt_fd = 0;             /* stdin */
    } else {
        *err = ERROR_INVALID_ACCESS;
        return NULL;
    }

    /* setup the pipe */
    if ((rc = DosCreatePipe(&pipeh[0], &pipeh[1], pipesize)) != NO_ERROR) {
        *err = rc;
        return NULL;
    }

    /* prevent other threads accessing stdio */
    DosEnterCritSec();

    /* reconnect stdio and execute child */
    oldfd = dup(tgtfd);
    close(tgtfd);
    if (dup2(pipeh[tgtfd], tgtfd) == 0) {
        DosClose(pipeh[tgtfd]);
        rc = async_system(command);
    }

    /* restore stdio */
    dup2(oldfd, tgtfd);
    close(oldfd);

    /* allow other threads access to stdio */
    DosExitCritSec();

    /* if execution of child was successful return file stream */
    if (rc == NO_ERROR)
        return fdopen(pipeh[1 - tgtfd], mode);
    else {
        DosClose(pipeh[1 - tgtfd]);
        *err = rc;
        return NULL;
    }
}

static PyObject *
posix_popen(PyObject *self, PyObject *args)
{
    char *name;
    char *mode = "r";
    int   err, bufsize = -1;
    FILE *fp;
    PyObject *f;
    if (!PyArg_ParseTuple(args, "s|si:popen", &name, &mode, &bufsize))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    fp = popen(name, mode, (bufsize > 0) ? bufsize : 4096, &err);
    Py_END_ALLOW_THREADS
    if (fp == NULL)
        return os2_error(err);

    f = PyFile_FromFile(fp, name, mode, fclose);
    if (f != NULL)
        PyFile_SetBufSize(f, bufsize);
    return f;
}

#elif defined(PYCC_GCC)

/* standard posix version of popen() support */
static PyObject *
posix_popen(PyObject *self, PyObject *args)
{
    char *name;
    char *mode = "r";
    int bufsize = -1;
    FILE *fp;
    PyObject *f;
    if (!PyArg_ParseTuple(args, "s|si:popen", &name, &mode, &bufsize))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    fp = popen(name, mode);
    Py_END_ALLOW_THREADS
    if (fp == NULL)
        return posix_error();
    f = PyFile_FromFile(fp, name, mode, pclose);
    if (f != NULL)
        PyFile_SetBufSize(f, bufsize);
    return f;
}

/* fork() under OS/2 has lots'o'warts
 * EMX supports pipe() and spawn*() so we can synthesize popen[234]()
 * most of this code is a ripoff of the win32 code, but using the
 * capabilities of EMX's C library routines
 */

/* These tell _PyPopen() whether to return 1, 2, or 3 file objects. */
#define POPEN_1 1
#define POPEN_2 2
#define POPEN_3 3
#define POPEN_4 4

static PyObject *_PyPopen(char *, int, int, int);
static int _PyPclose(FILE *file);

/*
 * Internal dictionary mapping popen* file pointers to process handles,
 * for use when retrieving the process exit code.  See _PyPclose() below
 * for more information on this dictionary's use.
 */
static PyObject *_PyPopenProcs = NULL;

/* os2emx version of popen2()
 *
 * The result of this function is a pipe (file) connected to the
 * process's stdin, and a pipe connected to the process's stdout.
 */

static PyObject *
os2emx_popen2(PyObject *self, PyObject  *args)
{
    PyObject *f;
    int tm=0;

    char *cmdstring;
    char *mode = "t";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen2", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 't')
        tm = O_TEXT;
    else if (*mode != 'b') {
        PyErr_SetString(PyExc_ValueError, "mode must be 't' or 'b'");
        return NULL;
    } else
        tm = O_BINARY;

    f = _PyPopen(cmdstring, tm, POPEN_2, bufsize);

    return f;
}

/*
 * Variation on os2emx.popen2
 *
 * The result of this function is 3 pipes - the process's stdin,
 * stdout and stderr
 */

static PyObject *
os2emx_popen3(PyObject *self, PyObject *args)
{
    PyObject *f;
    int tm = 0;

    char *cmdstring;
    char *mode = "t";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen3", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 't')
        tm = O_TEXT;
    else if (*mode != 'b') {
        PyErr_SetString(PyExc_ValueError, "mode must be 't' or 'b'");
        return NULL;
    } else
        tm = O_BINARY;

    f = _PyPopen(cmdstring, tm, POPEN_3, bufsize);

    return f;
}

/*
 * Variation on os2emx.popen2
 *
 * The result of this function is 2 pipes - the processes stdin,
 * and stdout+stderr combined as a single pipe.
 */

static PyObject *
os2emx_popen4(PyObject *self, PyObject  *args)
{
    PyObject *f;
    int tm = 0;

    char *cmdstring;
    char *mode = "t";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen4", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 't')
        tm = O_TEXT;
    else if (*mode != 'b') {
        PyErr_SetString(PyExc_ValueError, "mode must be 't' or 'b'");
        return NULL;
    } else
        tm = O_BINARY;

    f = _PyPopen(cmdstring, tm, POPEN_4, bufsize);

    return f;
}

/* a couple of structures for convenient handling of multiple
 * file handles and pipes
 */
struct file_ref
{
    int handle;
    int flags;
};

struct pipe_ref
{
    int rd;
    int wr;
};

/* The following code is derived from the win32 code */

static PyObject *
_PyPopen(char *cmdstring, int mode, int n, int bufsize)
{
    struct file_ref stdio[3];
    struct pipe_ref p_fd[3];
    FILE *p_s[3];
    int file_count, i, pipe_err;
    pid_t pipe_pid;
    char *shell, *sh_name, *opt, *rd_mode, *wr_mode;
    PyObject *f, *p_f[3];

    /* file modes for subsequent fdopen's on pipe handles */
    if (mode == O_TEXT)
    {
        rd_mode = "rt";
        wr_mode = "wt";
    }
    else
    {
        rd_mode = "rb";
        wr_mode = "wb";
    }

    /* prepare shell references */
    if ((shell = getenv("EMXSHELL")) == NULL)
        if ((shell = getenv("COMSPEC")) == NULL)
        {
            errno = ENOENT;
            return posix_error();
        }

    sh_name = _getname(shell);
    if (stricmp(sh_name, "cmd.exe") == 0 || stricmp(sh_name, "4os2.exe") == 0)
        opt = "/c";
    else
        opt = "-c";

    /* save current stdio fds + their flags, and set not inheritable */
    i = pipe_err = 0;
    while (pipe_err >= 0 && i < 3)
    {
        pipe_err = stdio[i].handle = dup(i);
        stdio[i].flags = fcntl(i, F_GETFD, 0);
        fcntl(stdio[i].handle, F_SETFD, stdio[i].flags | FD_CLOEXEC);
        i++;
    }
    if (pipe_err < 0)
    {
        /* didn't get them all saved - clean up and bail out */
        int saved_err = errno;
        while (i-- > 0)
        {
            close(stdio[i].handle);
        }
        errno = saved_err;
        return posix_error();
    }

    /* create pipe ends */
    file_count = 2;
    if (n == POPEN_3)
        file_count = 3;
    i = pipe_err = 0;
    while ((pipe_err == 0) && (i < file_count))
        pipe_err = pipe((int *)&p_fd[i++]);
    if (pipe_err < 0)
    {
        /* didn't get them all made - clean up and bail out */
        while (i-- > 0)
        {
            close(p_fd[i].wr);
            close(p_fd[i].rd);
        }
        errno = EPIPE;
        return posix_error();
    }

    /* change the actual standard IO streams over temporarily,
     * making the retained pipe ends non-inheritable
     */
    pipe_err = 0;

    /* - stdin */
    if (dup2(p_fd[0].rd, 0) == 0)
    {
        close(p_fd[0].rd);
        i = fcntl(p_fd[0].wr, F_GETFD, 0);
        fcntl(p_fd[0].wr, F_SETFD, i | FD_CLOEXEC);
        if ((p_s[0] = fdopen(p_fd[0].wr, wr_mode)) == NULL)
        {
            close(p_fd[0].wr);
            pipe_err = -1;
        }
    }
    else
    {
        pipe_err = -1;
    }

    /* - stdout */
    if (pipe_err == 0)
    {
        if (dup2(p_fd[1].wr, 1) == 1)
        {
            close(p_fd[1].wr);
            i = fcntl(p_fd[1].rd, F_GETFD, 0);
            fcntl(p_fd[1].rd, F_SETFD, i | FD_CLOEXEC);
            if ((p_s[1] = fdopen(p_fd[1].rd, rd_mode)) == NULL)
            {
                close(p_fd[1].rd);
                pipe_err = -1;
            }
        }
        else
        {
            pipe_err = -1;
        }
    }

    /* - stderr, as required */
    if (pipe_err == 0)
        switch (n)
        {
            case POPEN_3:
            {
                if (dup2(p_fd[2].wr, 2) == 2)
                {
                    close(p_fd[2].wr);
                    i = fcntl(p_fd[2].rd, F_GETFD, 0);
                    fcntl(p_fd[2].rd, F_SETFD, i | FD_CLOEXEC);
                    if ((p_s[2] = fdopen(p_fd[2].rd, rd_mode)) == NULL)
                    {
                        close(p_fd[2].rd);
                        pipe_err = -1;
                    }
                }
                else
                {
                    pipe_err = -1;
                }
                break;
            }

            case POPEN_4:
            {
                if (dup2(1, 2) != 2)
                {
                    pipe_err = -1;
                }
                break;
            }
        }

    /* spawn the child process */
    if (pipe_err == 0)
    {
        pipe_pid = spawnlp(P_NOWAIT, shell, shell, opt, cmdstring, (char *)0);
        if (pipe_pid == -1)
        {
            pipe_err = -1;
        }
        else
        {
            /* save the PID into the FILE structure
             * NOTE: this implementation doesn't actually
             * take advantage of this, but do it for
             * completeness - AIM Apr01
             */
            for (i = 0; i < file_count; i++)
                p_s[i]->_pid = pipe_pid;
        }
    }

    /* reset standard IO to normal */
    for (i = 0; i < 3; i++)
    {
        dup2(stdio[i].handle, i);
        fcntl(i, F_SETFD, stdio[i].flags);
        close(stdio[i].handle);
    }

    /* if any remnant problems, clean up and bail out */
    if (pipe_err < 0)
    {
        for (i = 0; i < 3; i++)
        {
            close(p_fd[i].rd);
            close(p_fd[i].wr);
        }
        errno = EPIPE;
        return posix_error_with_filename(cmdstring);
    }

    /* build tuple of file objects to return */
    if ((p_f[0] = PyFile_FromFile(p_s[0], cmdstring, wr_mode, _PyPclose)) != NULL)
        PyFile_SetBufSize(p_f[0], bufsize);
    if ((p_f[1] = PyFile_FromFile(p_s[1], cmdstring, rd_mode, _PyPclose)) != NULL)
        PyFile_SetBufSize(p_f[1], bufsize);
    if (n == POPEN_3)
    {
        if ((p_f[2] = PyFile_FromFile(p_s[2], cmdstring, rd_mode, _PyPclose)) != NULL)
            PyFile_SetBufSize(p_f[0], bufsize);
        f = PyTuple_Pack(3, p_f[0], p_f[1], p_f[2]);
    }
    else
        f = PyTuple_Pack(2, p_f[0], p_f[1]);

    /*
     * Insert the files we've created into the process dictionary
     * all referencing the list with the process handle and the
     * initial number of files (see description below in _PyPclose).
     * Since if _PyPclose later tried to wait on a process when all
     * handles weren't closed, it could create a deadlock with the
     * child, we spend some energy here to try to ensure that we
     * either insert all file handles into the dictionary or none
     * at all.  It's a little clumsy with the various popen modes
     * and variable number of files involved.
     */
    if (!_PyPopenProcs)
    {
        _PyPopenProcs = PyDict_New();
    }

    if (_PyPopenProcs)
    {
        PyObject *procObj, *pidObj, *intObj, *fileObj[3];
        int ins_rc[3];

        fileObj[0] = fileObj[1] = fileObj[2] = NULL;
        ins_rc[0]  = ins_rc[1]  = ins_rc[2]  = 0;

        procObj = PyList_New(2);
        pidObj = PyLong_FromPid(pipe_pid);
        intObj = PyInt_FromLong((long) file_count);

        if (procObj && pidObj && intObj)
        {
            PyList_SetItem(procObj, 0, pidObj);
            PyList_SetItem(procObj, 1, intObj);

            fileObj[0] = PyLong_FromVoidPtr(p_s[0]);
            if (fileObj[0])
            {
                ins_rc[0] = PyDict_SetItem(_PyPopenProcs,
                                           fileObj[0],
                                           procObj);
            }
            fileObj[1] = PyLong_FromVoidPtr(p_s[1]);
            if (fileObj[1])
            {
                ins_rc[1] = PyDict_SetItem(_PyPopenProcs,
                                           fileObj[1],
                                           procObj);
            }
            if (file_count >= 3)
            {
                fileObj[2] = PyLong_FromVoidPtr(p_s[2]);
                if (fileObj[2])
                {
                    ins_rc[2] = PyDict_SetItem(_PyPopenProcs,
                                               fileObj[2],
                                               procObj);
                }
            }

            if (ins_rc[0] < 0 || !fileObj[0] ||
                ins_rc[1] < 0 || (file_count > 1 && !fileObj[1]) ||
                ins_rc[2] < 0 || (file_count > 2 && !fileObj[2]))
            {
                /* Something failed - remove any dictionary
                 * entries that did make it.
                 */
                if (!ins_rc[0] && fileObj[0])
                {
                    PyDict_DelItem(_PyPopenProcs,
                                   fileObj[0]);
                }
                if (!ins_rc[1] && fileObj[1])
                {
                    PyDict_DelItem(_PyPopenProcs,
                                   fileObj[1]);
                }
                if (!ins_rc[2] && fileObj[2])
                {
                    PyDict_DelItem(_PyPopenProcs,
                                   fileObj[2]);
                }
            }
        }

        /*
         * Clean up our localized references for the dictionary keys
         * and value since PyDict_SetItem will Py_INCREF any copies
         * that got placed in the dictionary.
         */
        Py_XDECREF(procObj);
        Py_XDECREF(fileObj[0]);
        Py_XDECREF(fileObj[1]);
        Py_XDECREF(fileObj[2]);
    }

    /* Child is launched. */
    return f;
}

/*
 * Wrapper for fclose() to use for popen* files, so we can retrieve the
 * exit code for the child process and return as a result of the close.
 *
 * This function uses the _PyPopenProcs dictionary in order to map the
 * input file pointer to information about the process that was
 * originally created by the popen* call that created the file pointer.
 * The dictionary uses the file pointer as a key (with one entry
 * inserted for each file returned by the original popen* call) and a
 * single list object as the value for all files from a single call.
 * The list object contains the Win32 process handle at [0], and a file
 * count at [1], which is initialized to the total number of file
 * handles using that list.
 *
 * This function closes whichever handle it is passed, and decrements
 * the file count in the dictionary for the process handle pointed to
 * by this file.  On the last close (when the file count reaches zero),
 * this function will wait for the child process and then return its
 * exit code as the result of the close() operation.  This permits the
 * files to be closed in any order - it is always the close() of the
 * final handle that will return the exit code.
 *
 * NOTE: This function is currently called with the GIL released.
 * hence we use the GILState API to manage our state.
 */

static int _PyPclose(FILE *file)
{
    int result;
    int exit_code;
    pid_t pipe_pid;
    PyObject *procObj, *pidObj, *intObj, *fileObj;
    int file_count;
#ifdef WITH_THREAD
    PyGILState_STATE state;
#endif

    /* Close the file handle first, to ensure it can't block the
     * child from exiting if it's the last handle.
     */
    result = fclose(file);

#ifdef WITH_THREAD
    state = PyGILState_Ensure();
#endif
    if (_PyPopenProcs)
    {
        if ((fileObj = PyLong_FromVoidPtr(file)) != NULL &&
            (procObj = PyDict_GetItem(_PyPopenProcs,
                                      fileObj)) != NULL &&
            (pidObj = PyList_GetItem(procObj,0)) != NULL &&
            (intObj = PyList_GetItem(procObj,1)) != NULL)
        {
            pipe_pid = (pid_t) PyLong_AsPid(pidObj);
            file_count = (int) PyInt_AsLong(intObj);

            if (file_count > 1)
            {
                /* Still other files referencing process */
                file_count--;
                PyList_SetItem(procObj,1,
                               PyInt_FromLong((long) file_count));
            }
            else
            {
                /* Last file for this process */
                if (result != EOF &&
                    waitpid(pipe_pid, &exit_code, 0) == pipe_pid)
                {
                    /* extract exit status */
                    if (WIFEXITED(exit_code))
                    {
                        result = WEXITSTATUS(exit_code);
                    }
                    else
                    {
                        errno = EPIPE;
                        result = -1;
                    }
                }
                else
                {
                    /* Indicate failure - this will cause the file object
                     * to raise an I/O error and translate the last
                     * error code from errno.  We do have a problem with
                     * last errors that overlap the normal errno table,
                     * but that's a consistent problem with the file object.
                     */
                    result = -1;
                }
            }

            /* Remove this file pointer from dictionary */
            PyDict_DelItem(_PyPopenProcs, fileObj);

            if (PyDict_Size(_PyPopenProcs) == 0)
            {
                Py_DECREF(_PyPopenProcs);
                _PyPopenProcs = NULL;
            }

        } /* if object retrieval ok */

        Py_XDECREF(fileObj);
    } /* if _PyPopenProcs */

#ifdef WITH_THREAD
    PyGILState_Release(state);
#endif
    return result;
}

#endif /* PYCC_??? */

#elif defined(MS_WINDOWS)

/*
 * Portable 'popen' replacement for Win32.
 *
 * Written by Bill Tutt <billtut@microsoft.com>.  Minor tweaks
 * and 2.0 integration by Fredrik Lundh <fredrik@pythonware.com>
 * Return code handling by David Bolen <db3l@fitlinxx.com>.
 */

#include <malloc.h>
#include <io.h>
#include <fcntl.h>

/* These tell _PyPopen() wether to return 1, 2, or 3 file objects. */
#define POPEN_1 1
#define POPEN_2 2
#define POPEN_3 3
#define POPEN_4 4

static PyObject *_PyPopen(char *, int, int);
static int _PyPclose(FILE *file);

/*
 * Internal dictionary mapping popen* file pointers to process handles,
 * for use when retrieving the process exit code.  See _PyPclose() below
 * for more information on this dictionary's use.
 */
static PyObject *_PyPopenProcs = NULL;


/* popen that works from a GUI.
 *
 * The result of this function is a pipe (file) connected to the
 * processes stdin or stdout, depending on the requested mode.
 */

static PyObject *
posix_popen(PyObject *self, PyObject *args)
{
    PyObject *f;
    int tm = 0;

    char *cmdstring;
    char *mode = "r";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 'r')
        tm = _O_RDONLY;
    else if (*mode != 'w') {
        PyErr_SetString(PyExc_ValueError, "popen() arg 2 must be 'r' or 'w'");
        return NULL;
    } else
        tm = _O_WRONLY;

    if (bufsize != -1) {
        PyErr_SetString(PyExc_ValueError, "popen() arg 3 must be -1");
        return NULL;
    }

    if (*(mode+1) == 't')
        f = _PyPopen(cmdstring, tm | _O_TEXT, POPEN_1);
    else if (*(mode+1) == 'b')
        f = _PyPopen(cmdstring, tm | _O_BINARY, POPEN_1);
    else
        f = _PyPopen(cmdstring, tm | _O_TEXT, POPEN_1);

    return f;
}

/* Variation on win32pipe.popen
 *
 * The result of this function is a pipe (file) connected to the
 * process's stdin, and a pipe connected to the process's stdout.
 */

static PyObject *
win32_popen2(PyObject *self, PyObject  *args)
{
    PyObject *f;
    int tm=0;

    char *cmdstring;
    char *mode = "t";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen2", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 't')
        tm = _O_TEXT;
    else if (*mode != 'b') {
        PyErr_SetString(PyExc_ValueError, "popen2() arg 2 must be 't' or 'b'");
        return NULL;
    } else
        tm = _O_BINARY;

    if (bufsize != -1) {
        PyErr_SetString(PyExc_ValueError, "popen2() arg 3 must be -1");
        return NULL;
    }

    f = _PyPopen(cmdstring, tm, POPEN_2);

    return f;
}

/*
 * Variation on <om win32pipe.popen>
 *
 * The result of this function is 3 pipes - the process's stdin,
 * stdout and stderr
 */

static PyObject *
win32_popen3(PyObject *self, PyObject *args)
{
    PyObject *f;
    int tm = 0;

    char *cmdstring;
    char *mode = "t";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen3", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 't')
        tm = _O_TEXT;
    else if (*mode != 'b') {
        PyErr_SetString(PyExc_ValueError, "popen3() arg 2 must be 't' or 'b'");
        return NULL;
    } else
        tm = _O_BINARY;

    if (bufsize != -1) {
        PyErr_SetString(PyExc_ValueError, "popen3() arg 3 must be -1");
        return NULL;
    }

    f = _PyPopen(cmdstring, tm, POPEN_3);

    return f;
}

/*
 * Variation on win32pipe.popen
 *
 * The result of this function is 2 pipes - the processes stdin,
 * and stdout+stderr combined as a single pipe.
 */

static PyObject *
win32_popen4(PyObject *self, PyObject  *args)
{
    PyObject *f;
    int tm = 0;

    char *cmdstring;
    char *mode = "t";
    int bufsize = -1;
    if (!PyArg_ParseTuple(args, "s|si:popen4", &cmdstring, &mode, &bufsize))
        return NULL;

    if (*mode == 't')
        tm = _O_TEXT;
    else if (*mode != 'b') {
        PyErr_SetString(PyExc_ValueError, "popen4() arg 2 must be 't' or 'b'");
        return NULL;
    } else
        tm = _O_BINARY;

    if (bufsize != -1) {
        PyErr_SetString(PyExc_ValueError, "popen4() arg 3 must be -1");
        return NULL;
    }

    f = _PyPopen(cmdstring, tm, POPEN_4);

    return f;
}

static BOOL
_PyPopenCreateProcess(char *cmdstring,
                      HANDLE hStdin,
                      HANDLE hStdout,
                      HANDLE hStderr,
                      HANDLE *hProcess)
{
    PROCESS_INFORMATION piProcInfo;
    STARTUPINFO siStartInfo;
    DWORD dwProcessFlags = 0;  /* no NEW_CONSOLE by default for Ctrl+C handling */
    char *s1,*s2, *s3 = " /c ";
    const char *szConsoleSpawn = "w9xpopen.exe";
    int i;
    Py_ssize_t x;

    if (i = GetEnvironmentVariable("COMSPEC",NULL,0)) {
        char *comshell;

        s1 = (char *)alloca(i);
        if (!(x = GetEnvironmentVariable("COMSPEC", s1, i)))
            /* x < i, so x fits into an integer */
            return (int)x;

        /* Explicitly check if we are using COMMAND.COM.  If we are
         * then use the w9xpopen hack.
         */
        comshell = s1 + x;
        while (comshell >= s1 && *comshell != '\\')
            --comshell;
        ++comshell;

        if (GetVersion() < 0x80000000 &&
            _stricmp(comshell, "command.com") != 0) {
            /* NT/2000 and not using command.com. */
            x = i + strlen(s3) + strlen(cmdstring) + 1;
            s2 = (char *)alloca(x);
            ZeroMemory(s2, x);
            PyOS_snprintf(s2, x, "%s%s%s", s1, s3, cmdstring);
        }
        else {
            /*
             * Oh gag, we're on Win9x or using COMMAND.COM. Use
             * the workaround listed in KB: Q150956
             */
            char modulepath[_MAX_PATH];
            struct stat statinfo;
            GetModuleFileName(NULL, modulepath, sizeof(modulepath));
            for (x = i = 0; modulepath[i]; i++)
                if (modulepath[i] == SEP)
                    x = i+1;
            modulepath[x] = '\0';
            /* Create the full-name to w9xpopen, so we can test it exists */
            strncat(modulepath,
                    szConsoleSpawn,
                    (sizeof(modulepath)/sizeof(modulepath[0]))
                        -strlen(modulepath));
            if (stat(modulepath, &statinfo) != 0) {
                size_t mplen = sizeof(modulepath)/sizeof(modulepath[0]);
                /* Eeek - file-not-found - possibly an embedding
                   situation - see if we can locate it in sys.prefix
                */
                strncpy(modulepath,
                        Py_GetExecPrefix(),
                        mplen);
                modulepath[mplen-1] = '\0';
                if (modulepath[strlen(modulepath)-1] != '\\')
                    strcat(modulepath, "\\");
                strncat(modulepath,
                        szConsoleSpawn,
                        mplen-strlen(modulepath));
                /* No where else to look - raise an easily identifiable
                   error, rather than leaving Windows to report
                   "file not found" - as the user is probably blissfully
                   unaware this shim EXE is used, and it will confuse them.
                   (well, it confused me for a while ;-)
                */
                if (stat(modulepath, &statinfo) != 0) {
                    PyErr_Format(PyExc_RuntimeError,
                                 "Can not locate '%s' which is needed "
                                 "for popen to work with your shell "
                                 "or platform.",
                                 szConsoleSpawn);
                    return FALSE;
                }
            }
            x = i + strlen(s3) + strlen(cmdstring) + 1 +
                strlen(modulepath) +
                strlen(szConsoleSpawn) + 1;

            s2 = (char *)alloca(x);
            ZeroMemory(s2, x);
            /* To maintain correct argument passing semantics,
               we pass the command-line as it stands, and allow
               quoting to be applied.  w9xpopen.exe will then
               use its argv vector, and re-quote the necessary
               args for the ultimate child process.
            */
            PyOS_snprintf(
                s2, x,
                "\"%s\" %s%s%s",
                modulepath,
                s1,
                s3,
                cmdstring);
            /* Not passing CREATE_NEW_CONSOLE has been known to
               cause random failures on win9x.  Specifically a
               dialog:
               "Your program accessed mem currently in use at xxx"
               and a hopeful warning about the stability of your
               system.
               Cost is Ctrl+C won't kill children, but anyone
               who cares can have a go!
            */
            dwProcessFlags |= CREATE_NEW_CONSOLE;
        }
    }

    /* Could be an else here to try cmd.exe / command.com in the path
       Now we'll just error out.. */
    else {
        PyErr_SetString(PyExc_RuntimeError,
                        "Cannot locate a COMSPEC environment variable to "
                        "use as the shell");
        return FALSE;
    }

    ZeroMemory(&siStartInfo, sizeof(STARTUPINFO));
    siStartInfo.cb = sizeof(STARTUPINFO);
    siStartInfo.dwFlags = STARTF_USESTDHANDLES | STARTF_USESHOWWINDOW;
    siStartInfo.hStdInput = hStdin;
    siStartInfo.hStdOutput = hStdout;
    siStartInfo.hStdError = hStderr;
    siStartInfo.wShowWindow = SW_HIDE;

    if (CreateProcess(NULL,
                      s2,
                      NULL,
                      NULL,
                      TRUE,
                      dwProcessFlags,
                      NULL,
                      NULL,
                      &siStartInfo,
                      &piProcInfo) ) {
        /* Close the handles now so anyone waiting is woken. */
        CloseHandle(piProcInfo.hThread);

        /* Return process handle */
        *hProcess = piProcInfo.hProcess;
        return TRUE;
    }
    win32_error("CreateProcess", s2);
    return FALSE;
}

/* The following code is based off of KB: Q190351 */

static PyObject *
_PyPopen(char *cmdstring, int mode, int n)
{
    HANDLE hChildStdinRd, hChildStdinWr, hChildStdoutRd, hChildStdoutWr,
        hChildStderrRd, hChildStderrWr, hChildStdinWrDup, hChildStdoutRdDup,
        hChildStderrRdDup, hProcess; /* hChildStdoutWrDup; */

    SECURITY_ATTRIBUTES saAttr;
    BOOL fSuccess;
    int fd1, fd2, fd3;
    FILE *f1, *f2, *f3;
    long file_count;
    PyObject *f;

    saAttr.nLength = sizeof(SECURITY_ATTRIBUTES);
    saAttr.bInheritHandle = TRUE;
    saAttr.lpSecurityDescriptor = NULL;

    if (!CreatePipe(&hChildStdinRd, &hChildStdinWr, &saAttr, 0))
        return win32_error("CreatePipe", NULL);

    /* Create new output read handle and the input write handle. Set
     * the inheritance properties to FALSE. Otherwise, the child inherits
     * these handles; resulting in non-closeable handles to the pipes
     * being created. */
     fSuccess = DuplicateHandle(GetCurrentProcess(), hChildStdinWr,
                                GetCurrentProcess(), &hChildStdinWrDup, 0,
                                FALSE,
                                DUPLICATE_SAME_ACCESS);
     if (!fSuccess)
         return win32_error("DuplicateHandle", NULL);

     /* Close the inheritable version of ChildStdin
    that we're using. */
     CloseHandle(hChildStdinWr);

     if (!CreatePipe(&hChildStdoutRd, &hChildStdoutWr, &saAttr, 0))
         return win32_error("CreatePipe", NULL);

     fSuccess = DuplicateHandle(GetCurrentProcess(), hChildStdoutRd,
                                GetCurrentProcess(), &hChildStdoutRdDup, 0,
                                FALSE, DUPLICATE_SAME_ACCESS);
     if (!fSuccess)
         return win32_error("DuplicateHandle", NULL);

     /* Close the inheritable version of ChildStdout
        that we're using. */
     CloseHandle(hChildStdoutRd);

     if (n != POPEN_4) {
         if (!CreatePipe(&hChildStderrRd, &hChildStderrWr, &saAttr, 0))
             return win32_error("CreatePipe", NULL);
         fSuccess = DuplicateHandle(GetCurrentProcess(),
                                    hChildStderrRd,
                                    GetCurrentProcess(),
                                    &hChildStderrRdDup, 0,
                                    FALSE, DUPLICATE_SAME_ACCESS);
         if (!fSuccess)
             return win32_error("DuplicateHandle", NULL);
         /* Close the inheritable version of ChildStdErr that we're using. */
         CloseHandle(hChildStderrRd);
     }

     switch (n) {
     case POPEN_1:
         switch (mode & (_O_RDONLY | _O_TEXT | _O_BINARY | _O_WRONLY)) {
         case _O_WRONLY | _O_TEXT:
             /* Case for writing to child Stdin in text mode. */
             fd1 = _open_osfhandle((Py_intptr_t)hChildStdinWrDup, mode);
             f1 = _fdopen(fd1, "w");
             f = PyFile_FromFile(f1, cmdstring, "w", _PyPclose);
             PyFile_SetBufSize(f, 0);
             /* We don't care about these pipes anymore, so close them. */
             CloseHandle(hChildStdoutRdDup);
             CloseHandle(hChildStderrRdDup);
             break;

         case _O_RDONLY | _O_TEXT:
             /* Case for reading from child Stdout in text mode. */
             fd1 = _open_osfhandle((Py_intptr_t)hChildStdoutRdDup, mode);
             f1 = _fdopen(fd1, "r");
             f = PyFile_FromFile(f1, cmdstring, "r", _PyPclose);
             PyFile_SetBufSize(f, 0);
             /* We don't care about these pipes anymore, so close them. */
             CloseHandle(hChildStdinWrDup);
             CloseHandle(hChildStderrRdDup);
             break;

         case _O_RDONLY | _O_BINARY:
             /* Case for readinig from child Stdout in binary mode. */
             fd1 = _open_osfhandle((Py_intptr_t)hChildStdoutRdDup, mode);
             f1 = _fdopen(fd1, "rb");
             f = PyFile_FromFile(f1, cmdstring, "rb", _PyPclose);
             PyFile_SetBufSize(f, 0);
             /* We don't care about these pipes anymore, so close them. */
             CloseHandle(hChildStdinWrDup);
             CloseHandle(hChildStderrRdDup);
             break;

         case _O_WRONLY | _O_BINARY:
             /* Case for writing to child Stdin in binary mode. */
             fd1 = _open_osfhandle((Py_intptr_t)hChildStdinWrDup, mode);
             f1 = _fdopen(fd1, "wb");
             f = PyFile_FromFile(f1, cmdstring, "wb", _PyPclose);
             PyFile_SetBufSize(f, 0);
             /* We don't care about these pipes anymore, so close them. */
             CloseHandle(hChildStdoutRdDup);
             CloseHandle(hChildStderrRdDup);
             break;
         }
         file_count = 1;
         break;

     case POPEN_2:
     case POPEN_4:
     {
         char *m1, *m2;
         PyObject *p1, *p2;

         if (mode & _O_TEXT) {
             m1 = "r";
             m2 = "w";
         } else {
             m1 = "rb";
             m2 = "wb";
         }

         fd1 = _open_osfhandle((Py_intptr_t)hChildStdinWrDup, mode);
         f1 = _fdopen(fd1, m2);
         fd2 = _open_osfhandle((Py_intptr_t)hChildStdoutRdDup, mode);
         f2 = _fdopen(fd2, m1);
         p1 = PyFile_FromFile(f1, cmdstring, m2, _PyPclose);
         PyFile_SetBufSize(p1, 0);
         p2 = PyFile_FromFile(f2, cmdstring, m1, _PyPclose);
         PyFile_SetBufSize(p2, 0);

         if (n != 4)
             CloseHandle(hChildStderrRdDup);

         f = PyTuple_Pack(2,p1,p2);
         Py_XDECREF(p1);
         Py_XDECREF(p2);
         file_count = 2;
         break;
     }

     case POPEN_3:
     {
         char *m1, *m2;
         PyObject *p1, *p2, *p3;

         if (mode & _O_TEXT) {
             m1 = "r";
             m2 = "w";
         } else {
             m1 = "rb";
             m2 = "wb";
         }

         fd1 = _open_osfhandle((Py_intptr_t)hChildStdinWrDup, mode);
         f1 = _fdopen(fd1, m2);
         fd2 = _open_osfhandle((Py_intptr_t)hChildStdoutRdDup, mode);
         f2 = _fdopen(fd2, m1);
         fd3 = _open_osfhandle((Py_intptr_t)hChildStderrRdDup, mode);
         f3 = _fdopen(fd3, m1);
         p1 = PyFile_FromFile(f1, cmdstring, m2, _PyPclose);
         p2 = PyFile_FromFile(f2, cmdstring, m1, _PyPclose);
         p3 = PyFile_FromFile(f3, cmdstring, m1, _PyPclose);
         PyFile_SetBufSize(p1, 0);
         PyFile_SetBufSize(p2, 0);
         PyFile_SetBufSize(p3, 0);
         f = PyTuple_Pack(3,p1,p2,p3);
         Py_XDECREF(p1);
         Py_XDECREF(p2);
         Py_XDECREF(p3);
         file_count = 3;
         break;
     }
     }

     if (n == POPEN_4) {
         if (!_PyPopenCreateProcess(cmdstring,
                                    hChildStdinRd,
                                    hChildStdoutWr,
                                    hChildStdoutWr,
                                    &hProcess))
             return NULL;
     }
     else {
         if (!_PyPopenCreateProcess(cmdstring,
                                    hChildStdinRd,
                                    hChildStdoutWr,
                                    hChildStderrWr,
                                    &hProcess))
             return NULL;
     }

     /*
      * Insert the files we've created into the process dictionary
      * all referencing the list with the process handle and the
      * initial number of files (see description below in _PyPclose).
      * Since if _PyPclose later tried to wait on a process when all
      * handles weren't closed, it could create a deadlock with the
      * child, we spend some energy here to try to ensure that we
      * either insert all file handles into the dictionary or none
      * at all.  It's a little clumsy with the various popen modes
      * and variable number of files involved.
      */
     if (!_PyPopenProcs) {
         _PyPopenProcs = PyDict_New();
     }

     if (_PyPopenProcs) {
         PyObject *procObj, *hProcessObj, *intObj, *fileObj[3];
         int ins_rc[3];

         fileObj[0] = fileObj[1] = fileObj[2] = NULL;
         ins_rc[0]  = ins_rc[1]  = ins_rc[2]  = 0;

         procObj = PyList_New(2);
         hProcessObj = PyLong_FromVoidPtr(hProcess);
         intObj = PyInt_FromLong(file_count);

         if (procObj && hProcessObj && intObj) {
             PyList_SetItem(procObj,0,hProcessObj);
             PyList_SetItem(procObj,1,intObj);

             fileObj[0] = PyLong_FromVoidPtr(f1);
             if (fileObj[0]) {
                ins_rc[0] = PyDict_SetItem(_PyPopenProcs,
                                           fileObj[0],
                                           procObj);
             }
             if (file_count >= 2) {
                 fileObj[1] = PyLong_FromVoidPtr(f2);
                 if (fileObj[1]) {
                    ins_rc[1] = PyDict_SetItem(_PyPopenProcs,
                                               fileObj[1],
                                               procObj);
                 }
             }
             if (file_count >= 3) {
                 fileObj[2] = PyLong_FromVoidPtr(f3);
                 if (fileObj[2]) {
                    ins_rc[2] = PyDict_SetItem(_PyPopenProcs,
                                               fileObj[2],
                                               procObj);
                 }
             }

             if (ins_rc[0] < 0 || !fileObj[0] ||
                 ins_rc[1] < 0 || (file_count > 1 && !fileObj[1]) ||
                 ins_rc[2] < 0 || (file_count > 2 && !fileObj[2])) {
                 /* Something failed - remove any dictionary
                  * entries that did make it.
                  */
                 if (!ins_rc[0] && fileObj[0]) {
                     PyDict_DelItem(_PyPopenProcs,
                                    fileObj[0]);
                 }
                 if (!ins_rc[1] && fileObj[1]) {
                     PyDict_DelItem(_PyPopenProcs,
                                    fileObj[1]);
                 }
                 if (!ins_rc[2] && fileObj[2]) {
                     PyDict_DelItem(_PyPopenProcs,
                                    fileObj[2]);
                 }
             }
         }

         /*
          * Clean up our localized references for the dictionary keys
          * and value since PyDict_SetItem will Py_INCREF any copies
          * that got placed in the dictionary.
          */
         Py_XDECREF(procObj);
         Py_XDECREF(fileObj[0]);
         Py_XDECREF(fileObj[1]);
         Py_XDECREF(fileObj[2]);
     }

     /* Child is launched. Close the parents copy of those pipe
      * handles that only the child should have open.  You need to
      * make sure that no handles to the write end of the output pipe
      * are maintained in this process or else the pipe will not close
      * when the child process exits and the ReadFile will hang. */

     if (!CloseHandle(hChildStdinRd))
         return win32_error("CloseHandle", NULL);

     if (!CloseHandle(hChildStdoutWr))
         return win32_error("CloseHandle", NULL);

     if ((n != 4) && (!CloseHandle(hChildStderrWr)))
         return win32_error("CloseHandle", NULL);

     return f;
}

/*
 * Wrapper for fclose() to use for popen* files, so we can retrieve the
 * exit code for the child process and return as a result of the close.
 *
 * This function uses the _PyPopenProcs dictionary in order to map the
 * input file pointer to information about the process that was
 * originally created by the popen* call that created the file pointer.
 * The dictionary uses the file pointer as a key (with one entry
 * inserted for each file returned by the original popen* call) and a
 * single list object as the value for all files from a single call.
 * The list object contains the Win32 process handle at [0], and a file
 * count at [1], which is initialized to the total number of file
 * handles using that list.
 *
 * This function closes whichever handle it is passed, and decrements
 * the file count in the dictionary for the process handle pointed to
 * by this file.  On the last close (when the file count reaches zero),
 * this function will wait for the child process and then return its
 * exit code as the result of the close() operation.  This permits the
 * files to be closed in any order - it is always the close() of the
 * final handle that will return the exit code.
 *
 * NOTE: This function is currently called with the GIL released.
 * hence we use the GILState API to manage our state.
 */

static int _PyPclose(FILE *file)
{
    int result;
    DWORD exit_code;
    HANDLE hProcess;
    PyObject *procObj, *hProcessObj, *intObj, *fileObj;
    long file_count;
#ifdef WITH_THREAD
    PyGILState_STATE state;
#endif

    /* Close the file handle first, to ensure it can't block the
     * child from exiting if it's the last handle.
     */
    result = fclose(file);
#ifdef WITH_THREAD
    state = PyGILState_Ensure();
#endif
    if (_PyPopenProcs) {
        if ((fileObj = PyLong_FromVoidPtr(file)) != NULL &&
            (procObj = PyDict_GetItem(_PyPopenProcs,
                                      fileObj)) != NULL &&
            (hProcessObj = PyList_GetItem(procObj,0)) != NULL &&
            (intObj = PyList_GetItem(procObj,1)) != NULL) {

            hProcess = PyLong_AsVoidPtr(hProcessObj);
            file_count = PyInt_AsLong(intObj);

            if (file_count > 1) {
                /* Still other files referencing process */
                file_count--;
                PyList_SetItem(procObj,1,
                               PyInt_FromLong(file_count));
            } else {
                /* Last file for this process */
                if (result != EOF &&
                    WaitForSingleObject(hProcess, INFINITE) != WAIT_FAILED &&
                    GetExitCodeProcess(hProcess, &exit_code)) {
                    /* Possible truncation here in 16-bit environments, but
                     * real exit codes are just the lower byte in any event.
                     */
                    result = exit_code;
                } else {
                    /* Indicate failure - this will cause the file object
                     * to raise an I/O error and translate the last Win32
                     * error code from errno.  We do have a problem with
                     * last errors that overlap the normal errno table,
                     * but that's a consistent problem with the file object.
                     */
                    if (result != EOF) {
                        /* If the error wasn't from the fclose(), then
                         * set errno for the file object error handling.
                         */
                        errno = GetLastError();
                    }
                    result = -1;
                }

                /* Free up the native handle at this point */
                CloseHandle(hProcess);
            }

            /* Remove this file pointer from dictionary */
            PyDict_DelItem(_PyPopenProcs, fileObj);

            if (PyDict_Size(_PyPopenProcs) == 0) {
                Py_DECREF(_PyPopenProcs);
                _PyPopenProcs = NULL;
            }

        } /* if object retrieval ok */

        Py_XDECREF(fileObj);
    } /* if _PyPopenProcs */

#ifdef WITH_THREAD
    PyGILState_Release(state);
#endif
    return result;
}

#else /* which OS? */
static PyObject *
posix_popen(PyObject *self, PyObject *args)
{
    char *name;
    char *mode = "r";
    int bufsize = -1;
    FILE *fp;
    PyObject *f;
    if (!PyArg_ParseTuple(args, "s|si:popen", &name, &mode, &bufsize))
        return NULL;
    /* Strip mode of binary or text modifiers */
    if (strcmp(mode, "rb") == 0 || strcmp(mode, "rt") == 0)
        mode = "r";
    else if (strcmp(mode, "wb") == 0 || strcmp(mode, "wt") == 0)
        mode = "w";
    Py_BEGIN_ALLOW_THREADS
    fp = popen(name, mode);
    Py_END_ALLOW_THREADS
    if (fp == NULL)
        return posix_error();
    f = PyFile_FromFile(fp, name, mode, pclose);
    if (f != NULL)
        PyFile_SetBufSize(f, bufsize);
    return f;
}

#endif /* PYOS_??? */
#endif /* HAVE_POPEN */


#ifdef HAVE_SETUID
PyDoc_STRVAR(posix_setuid__doc__,
"setuid(uid)\n\n\
Set the current process's user id.");

static PyObject *
posix_setuid(PyObject *self, PyObject *args)
{
    long uid_arg;
    uid_t uid;
    if (!PyArg_ParseTuple(args, "l:setuid", &uid_arg))
        return NULL;
    uid = uid_arg;
    if (uid != uid_arg) {
        PyErr_SetString(PyExc_OverflowError, "user id too big");
        return NULL;
    }
    if (setuid(uid) < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_SETUID */


#ifdef HAVE_SETEUID
PyDoc_STRVAR(posix_seteuid__doc__,
"seteuid(uid)\n\n\
Set the current process's effective user id.");

static PyObject *
posix_seteuid (PyObject *self, PyObject *args)
{
    long euid_arg;
    uid_t euid;
    if (!PyArg_ParseTuple(args, "l", &euid_arg))
        return NULL;
    euid = euid_arg;
    if (euid != euid_arg) {
        PyErr_SetString(PyExc_OverflowError, "user id too big");
        return NULL;
    }
    if (seteuid(euid) < 0) {
        return posix_error();
    } else {
        Py_INCREF(Py_None);
        return Py_None;
    }
}
#endif /* HAVE_SETEUID */

#ifdef HAVE_SETEGID
PyDoc_STRVAR(posix_setegid__doc__,
"setegid(gid)\n\n\
Set the current process's effective group id.");

static PyObject *
posix_setegid (PyObject *self, PyObject *args)
{
    long egid_arg;
    gid_t egid;
    if (!PyArg_ParseTuple(args, "l", &egid_arg))
        return NULL;
    egid = egid_arg;
    if (egid != egid_arg) {
        PyErr_SetString(PyExc_OverflowError, "group id too big");
        return NULL;
    }
    if (setegid(egid) < 0) {
        return posix_error();
    } else {
        Py_INCREF(Py_None);
        return Py_None;
    }
}
#endif /* HAVE_SETEGID */

#ifdef HAVE_SETREUID
PyDoc_STRVAR(posix_setreuid__doc__,
"setreuid(ruid, euid)\n\n\
Set the current process's real and effective user ids.");

static PyObject *
posix_setreuid (PyObject *self, PyObject *args)
{
    long ruid_arg, euid_arg;
    uid_t ruid, euid;
    if (!PyArg_ParseTuple(args, "ll", &ruid_arg, &euid_arg))
        return NULL;
    if (ruid_arg == -1)
        ruid = (uid_t)-1;  /* let the compiler choose how -1 fits */
    else
        ruid = ruid_arg;  /* otherwise, assign from our long */
    if (euid_arg == -1)
        euid = (uid_t)-1;
    else
        euid = euid_arg;
    if ((euid_arg != -1 && euid != euid_arg) ||
        (ruid_arg != -1 && ruid != ruid_arg)) {
        PyErr_SetString(PyExc_OverflowError, "user id too big");
        return NULL;
    }
    if (setreuid(ruid, euid) < 0) {
        return posix_error();
    } else {
        Py_INCREF(Py_None);
        return Py_None;
    }
}
#endif /* HAVE_SETREUID */

#ifdef HAVE_SETREGID
PyDoc_STRVAR(posix_setregid__doc__,
"setregid(rgid, egid)\n\n\
Set the current process's real and effective group ids.");

static PyObject *
posix_setregid (PyObject *self, PyObject *args)
{
    long rgid_arg, egid_arg;
    gid_t rgid, egid;
    if (!PyArg_ParseTuple(args, "ll", &rgid_arg, &egid_arg))
        return NULL;
    if (rgid_arg == -1)
        rgid = (gid_t)-1;  /* let the compiler choose how -1 fits */
    else
        rgid = rgid_arg;  /* otherwise, assign from our long */
    if (egid_arg == -1)
        egid = (gid_t)-1;
    else
        egid = egid_arg;
    if ((egid_arg != -1 && egid != egid_arg) ||
        (rgid_arg != -1 && rgid != rgid_arg)) {
        PyErr_SetString(PyExc_OverflowError, "group id too big");
        return NULL;
    }
    if (setregid(rgid, egid) < 0) {
        return posix_error();
    } else {
        Py_INCREF(Py_None);
        return Py_None;
    }
}
#endif /* HAVE_SETREGID */

#ifdef HAVE_SETGID
PyDoc_STRVAR(posix_setgid__doc__,
"setgid(gid)\n\n\
Set the current process's group id.");

static PyObject *
posix_setgid(PyObject *self, PyObject *args)
{
    long gid_arg;
    gid_t gid;
    if (!PyArg_ParseTuple(args, "l:setgid", &gid_arg))
        return NULL;
    gid = gid_arg;
    if (gid != gid_arg) {
        PyErr_SetString(PyExc_OverflowError, "group id too big");
        return NULL;
    }
    if (setgid(gid) < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_SETGID */

#ifdef HAVE_SETGROUPS
PyDoc_STRVAR(posix_setgroups__doc__,
"setgroups(list)\n\n\
Set the groups of the current process to list.");

static PyObject *
posix_setgroups(PyObject *self, PyObject *groups)
{
    int i, len;
    gid_t grouplist[MAX_GROUPS];

    if (!PySequence_Check(groups)) {
        PyErr_SetString(PyExc_TypeError, "setgroups argument must be a sequence");
        return NULL;
    }
    len = PySequence_Size(groups);
    if (len > MAX_GROUPS) {
        PyErr_SetString(PyExc_ValueError, "too many groups");
        return NULL;
    }
    for(i = 0; i < len; i++) {
        PyObject *elem;
        elem = PySequence_GetItem(groups, i);
        if (!elem)
            return NULL;
        if (!PyInt_Check(elem)) {
            if (!PyLong_Check(elem)) {
                PyErr_SetString(PyExc_TypeError,
                                "groups must be integers");
                Py_DECREF(elem);
                return NULL;
            } else {
                unsigned long x = PyLong_AsUnsignedLong(elem);
                if (PyErr_Occurred()) {
                    PyErr_SetString(PyExc_TypeError,
                                    "group id too big");
                    Py_DECREF(elem);
                    return NULL;
                }
                grouplist[i] = x;
                /* read back to see if it fits in gid_t */
                if (grouplist[i] != x) {
                    PyErr_SetString(PyExc_TypeError,
                                    "group id too big");
                    Py_DECREF(elem);
                    return NULL;
                }
            }
        } else {
            long x  = PyInt_AsLong(elem);
            grouplist[i] = x;
            if (grouplist[i] != x) {
                PyErr_SetString(PyExc_TypeError,
                                "group id too big");
                Py_DECREF(elem);
                return NULL;
            }
        }
        Py_DECREF(elem);
    }

    if (setgroups(len, grouplist) < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_SETGROUPS */

#if defined(HAVE_WAIT3) || defined(HAVE_WAIT4)
static PyObject *
wait_helper(pid_t pid, int status, struct rusage *ru)
{
    PyObject *result;
    static PyObject *struct_rusage;

    if (pid == -1)
        return posix_error();

    if (struct_rusage == NULL) {
        PyObject *m = PyImport_ImportModuleNoBlock("resource");
        if (m == NULL)
            return NULL;
        struct_rusage = PyObject_GetAttrString(m, "struct_rusage");
        Py_DECREF(m);
        if (struct_rusage == NULL)
            return NULL;
    }

    /* XXX(nnorwitz): Copied (w/mods) from resource.c, there should be only one. */
    result = PyStructSequence_New((PyTypeObject*) struct_rusage);
    if (!result)
        return NULL;

#ifndef doubletime
#define doubletime(TV) ((double)(TV).tv_sec + (TV).tv_usec * 0.000001)
#endif

    PyStructSequence_SET_ITEM(result, 0,
                              PyFloat_FromDouble(doubletime(ru->ru_utime)));
    PyStructSequence_SET_ITEM(result, 1,
                              PyFloat_FromDouble(doubletime(ru->ru_stime)));
#define SET_INT(result, index, value)\
        PyStructSequence_SET_ITEM(result, index, PyInt_FromLong(value))
    SET_INT(result, 2, ru->ru_maxrss);
    SET_INT(result, 3, ru->ru_ixrss);
    SET_INT(result, 4, ru->ru_idrss);
    SET_INT(result, 5, ru->ru_isrss);
    SET_INT(result, 6, ru->ru_minflt);
    SET_INT(result, 7, ru->ru_majflt);
    SET_INT(result, 8, ru->ru_nswap);
    SET_INT(result, 9, ru->ru_inblock);
    SET_INT(result, 10, ru->ru_oublock);
    SET_INT(result, 11, ru->ru_msgsnd);
    SET_INT(result, 12, ru->ru_msgrcv);
    SET_INT(result, 13, ru->ru_nsignals);
    SET_INT(result, 14, ru->ru_nvcsw);
    SET_INT(result, 15, ru->ru_nivcsw);
#undef SET_INT

    if (PyErr_Occurred()) {
        Py_DECREF(result);
        return NULL;
    }

    return Py_BuildValue("NiN", PyLong_FromPid(pid), status, result);
}
#endif /* HAVE_WAIT3 || HAVE_WAIT4 */

#ifdef HAVE_WAIT3
PyDoc_STRVAR(posix_wait3__doc__,
"wait3(options) -> (pid, status, rusage)\n\n\
Wait for completion of a child process.");

static PyObject *
posix_wait3(PyObject *self, PyObject *args)
{
    pid_t pid;
    int options;
    struct rusage ru;
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:wait3", &options))
        return NULL;

    Py_BEGIN_ALLOW_THREADS
    pid = wait3(&status, options, &ru);
    Py_END_ALLOW_THREADS

    return wait_helper(pid, WAIT_STATUS_INT(status), &ru);
}
#endif /* HAVE_WAIT3 */

#ifdef HAVE_WAIT4
PyDoc_STRVAR(posix_wait4__doc__,
"wait4(pid, options) -> (pid, status, rusage)\n\n\
Wait for completion of a given child process.");

static PyObject *
posix_wait4(PyObject *self, PyObject *args)
{
    pid_t pid;
    int options;
    struct rusage ru;
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, PARSE_PID "i:wait4", &pid, &options))
        return NULL;

    Py_BEGIN_ALLOW_THREADS
    pid = wait4(pid, &status, options, &ru);
    Py_END_ALLOW_THREADS

    return wait_helper(pid, WAIT_STATUS_INT(status), &ru);
}
#endif /* HAVE_WAIT4 */

#ifdef HAVE_WAITPID
PyDoc_STRVAR(posix_waitpid__doc__,
"waitpid(pid, options) -> (pid, status)\n\n\
Wait for completion of a given child process.");

static PyObject *
posix_waitpid(PyObject *self, PyObject *args)
{
    pid_t pid;
    int options;
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, PARSE_PID "i:waitpid", &pid, &options))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    pid = waitpid(pid, &status, options);
    Py_END_ALLOW_THREADS
    if (pid == -1)
        return posix_error();

    return Py_BuildValue("Ni", PyLong_FromPid(pid), WAIT_STATUS_INT(status));
}

#elif defined(HAVE_CWAIT)

/* MS C has a variant of waitpid() that's usable for most purposes. */
PyDoc_STRVAR(posix_waitpid__doc__,
"waitpid(pid, options) -> (pid, status << 8)\n\n"
"Wait for completion of a given process.  options is ignored on Windows.");

static PyObject *
posix_waitpid(PyObject *self, PyObject *args)
{
    Py_intptr_t pid;
    int status, options;

    if (!PyArg_ParseTuple(args, PARSE_PID "i:waitpid", &pid, &options))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    pid = _cwait(&status, pid, options);
    Py_END_ALLOW_THREADS
    if (pid == -1)
        return posix_error();

    /* shift the status left a byte so this is more like the POSIX waitpid */
    return Py_BuildValue("Ni", PyLong_FromPid(pid), status << 8);
}
#endif /* HAVE_WAITPID || HAVE_CWAIT */

#ifdef HAVE_WAIT
PyDoc_STRVAR(posix_wait__doc__,
"wait() -> (pid, status)\n\n\
Wait for completion of a child process.");

static PyObject *
posix_wait(PyObject *self, PyObject *noargs)
{
    pid_t pid;
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    Py_BEGIN_ALLOW_THREADS
    pid = wait(&status);
    Py_END_ALLOW_THREADS
    if (pid == -1)
        return posix_error();

    return Py_BuildValue("Ni", PyLong_FromPid(pid), WAIT_STATUS_INT(status));
}
#endif


PyDoc_STRVAR(posix_lstat__doc__,
"lstat(path) -> stat result\n\n\
Like stat(path), but do not follow symbolic links.");

static PyObject *
posix_lstat(PyObject *self, PyObject *args)
{
#ifdef HAVE_LSTAT
    return posix_do_stat(self, args, "et:lstat", lstat, NULL, NULL);
#else /* !HAVE_LSTAT */
    return posix_do_stat(self, args, "et:lstat", STAT, NULL, NULL);
#endif /* !HAVE_LSTAT */
}


#ifdef HAVE_READLINK
PyDoc_STRVAR(posix_readlink__doc__,
"readlink(path) -> path\n\n\
Return a string representing the path to which the symbolic link points.");

static PyObject *
posix_readlink(PyObject *self, PyObject *args)
{
    PyObject* v;
    char buf[MAXPATHLEN];
    char *path;
    int n;
#ifdef Py_USING_UNICODE
    int arg_is_unicode = 0;
#endif

    if (!PyArg_ParseTuple(args, "et:readlink",
                          Py_FileSystemDefaultEncoding, &path))
        return NULL;
#ifdef Py_USING_UNICODE
    v = PySequence_GetItem(args, 0);
    if (v == NULL) {
        PyMem_Free(path);
        return NULL;
    }

    if (PyUnicode_Check(v)) {
        arg_is_unicode = 1;
    }
    Py_DECREF(v);
#endif

    Py_BEGIN_ALLOW_THREADS
    n = readlink(path, buf, (int) sizeof buf);
    Py_END_ALLOW_THREADS
    if (n < 0)
        return posix_error_with_allocated_filename(path);

    PyMem_Free(path);
    v = PyString_FromStringAndSize(buf, n);
#ifdef Py_USING_UNICODE
    if (arg_is_unicode) {
        PyObject *w;

        w = PyUnicode_FromEncodedObject(v,
                                        Py_FileSystemDefaultEncoding,
                                        "strict");
        if (w != NULL) {
            Py_DECREF(v);
            v = w;
        }
        else {
            /* fall back to the original byte string, as
               discussed in patch #683592 */
            PyErr_Clear();
        }
    }
#endif
    return v;
}
#endif /* HAVE_READLINK */


#ifdef HAVE_SYMLINK
PyDoc_STRVAR(posix_symlink__doc__,
"symlink(src, dst)\n\n\
Create a symbolic link pointing to src named dst.");

static PyObject *
posix_symlink(PyObject *self, PyObject *args)
{
    return posix_2str(args, "etet:symlink", symlink);
}
#endif /* HAVE_SYMLINK */


#ifdef HAVE_TIMES
#if defined(PYCC_VACPP) && defined(PYOS_OS2)
static long
system_uptime(void)
{
    ULONG     value = 0;

    Py_BEGIN_ALLOW_THREADS
    DosQuerySysInfo(QSV_MS_COUNT, QSV_MS_COUNT, &value, sizeof(value));
    Py_END_ALLOW_THREADS

    return value;
}

static PyObject *
posix_times(PyObject *self, PyObject *noargs)
{
    /* Currently Only Uptime is Provided -- Others Later */
    return Py_BuildValue("ddddd",
                         (double)0 /* t.tms_utime / HZ */,
                         (double)0 /* t.tms_stime / HZ */,
                         (double)0 /* t.tms_cutime / HZ */,
                         (double)0 /* t.tms_cstime / HZ */,
                         (double)system_uptime() / 1000);
}
#else /* not OS2 */
#define NEED_TICKS_PER_SECOND
static long ticks_per_second = -1;
static PyObject *
posix_times(PyObject *self, PyObject *noargs)
{
    struct tms t;
    clock_t c;
    errno = 0;
    c = times(&t);
    if (c == (clock_t) -1)
        return posix_error();
    return Py_BuildValue("ddddd",
                         (double)t.tms_utime / ticks_per_second,
                         (double)t.tms_stime / ticks_per_second,
                         (double)t.tms_cutime / ticks_per_second,
                         (double)t.tms_cstime / ticks_per_second,
                         (double)c / ticks_per_second);
}
#endif /* not OS2 */
#endif /* HAVE_TIMES */


#ifdef HAVE_TIMES
PyDoc_STRVAR(posix_times__doc__,
"times() -> (utime, stime, cutime, cstime, elapsed_time)\n\n\
Return a tuple of floating point numbers indicating process times.");
#endif


#ifdef HAVE_GETSID
PyDoc_STRVAR(posix_getsid__doc__,
"getsid(pid) -> sid\n\n\
Call the system call getsid().");

static PyObject *
posix_getsid(PyObject *self, PyObject *args)
{
    pid_t pid;
    int sid;
    if (!PyArg_ParseTuple(args, PARSE_PID ":getsid", &pid))
        return NULL;
    sid = getsid(pid);
    if (sid < 0)
        return posix_error();
    return PyInt_FromLong((long)sid);
}
#endif /* HAVE_GETSID */


#ifdef HAVE_SETSID
PyDoc_STRVAR(posix_setsid__doc__,
"setsid()\n\n\
Call the system call setsid().");

static PyObject *
posix_setsid(PyObject *self, PyObject *noargs)
{
    if (setsid() < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_SETSID */

#ifdef HAVE_SETPGID
PyDoc_STRVAR(posix_setpgid__doc__,
"setpgid(pid, pgrp)\n\n\
Call the system call setpgid().");

static PyObject *
posix_setpgid(PyObject *self, PyObject *args)
{
    pid_t pid;
    int pgrp;
    if (!PyArg_ParseTuple(args, PARSE_PID "i:setpgid", &pid, &pgrp))
        return NULL;
    if (setpgid(pid, pgrp) < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_SETPGID */


#ifdef HAVE_TCGETPGRP
PyDoc_STRVAR(posix_tcgetpgrp__doc__,
"tcgetpgrp(fd) -> pgid\n\n\
Return the process group associated with the terminal given by a fd.");

static PyObject *
posix_tcgetpgrp(PyObject *self, PyObject *args)
{
    int fd;
    pid_t pgid;
    if (!PyArg_ParseTuple(args, "i:tcgetpgrp", &fd))
        return NULL;
    pgid = tcgetpgrp(fd);
    if (pgid < 0)
        return posix_error();
    return PyLong_FromPid(pgid);
}
#endif /* HAVE_TCGETPGRP */


#ifdef HAVE_TCSETPGRP
PyDoc_STRVAR(posix_tcsetpgrp__doc__,
"tcsetpgrp(fd, pgid)\n\n\
Set the process group associated with the terminal given by a fd.");

static PyObject *
posix_tcsetpgrp(PyObject *self, PyObject *args)
{
    int fd;
    pid_t pgid;
    if (!PyArg_ParseTuple(args, "i" PARSE_PID ":tcsetpgrp", &fd, &pgid))
        return NULL;
    if (tcsetpgrp(fd, pgid) < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* HAVE_TCSETPGRP */

/* Functions acting on file descriptors */

PyDoc_STRVAR(posix_open__doc__,
"open(filename, flag [, mode=0777]) -> fd\n\n\
Open a file (for low level IO).");

static PyObject *
posix_open(PyObject *self, PyObject *args)
{
    char *file = NULL;
    int flag;
    int mode = 0777;
    int fd;

    if (!PyArg_ParseTuple(args, "eti|i",
                          Py_FileSystemDefaultEncoding, &file,
                          &flag, &mode))
        return NULL;

    Py_BEGIN_ALLOW_THREADS
    fd = open(file, flag, mode);
    Py_END_ALLOW_THREADS
    if (fd < 0)
        return posix_error_with_allocated_filename(file);
    PyMem_Free(file);
    return PyInt_FromLong((long)fd);
}


PyDoc_STRVAR(posix_close__doc__,
"close(fd)\n\n\
Close a file descriptor (for low level IO).");

static PyObject *
posix_close(PyObject *self, PyObject *args)
{
    int fd, res;
    if (!PyArg_ParseTuple(args, "i:close", &fd))
        return NULL;
    if (!_PyVerify_fd(fd))
        return posix_error();
    Py_BEGIN_ALLOW_THREADS
    res = close(fd);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}


PyDoc_STRVAR(posix_closerange__doc__,
"closerange(fd_low, fd_high)\n\n\
Closes all file descriptors in [fd_low, fd_high), ignoring errors.");

static PyObject *
posix_closerange(PyObject *self, PyObject *args)
{
    int fd_from, fd_to, i;
    if (!PyArg_ParseTuple(args, "ii:closerange", &fd_from, &fd_to))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    for (i = fd_from; i < fd_to; i++)
        if (_PyVerify_fd(i))
            close(i);
    Py_END_ALLOW_THREADS
    Py_RETURN_NONE;
}


PyDoc_STRVAR(posix_dup__doc__,
"dup(fd) -> fd2\n\n\
Return a duplicate of a file descriptor.");

static PyObject *
posix_dup(PyObject *self, PyObject *args)
{
    int fd;
    if (!PyArg_ParseTuple(args, "i:dup", &fd))
        return NULL;
    if (!_PyVerify_fd(fd))
        return posix_error();
    Py_BEGIN_ALLOW_THREADS
    fd = dup(fd);
    Py_END_ALLOW_THREADS
    if (fd < 0)
        return posix_error();
    return PyInt_FromLong((long)fd);
}


PyDoc_STRVAR(posix_dup2__doc__,
"dup2(old_fd, new_fd)\n\n\
Duplicate file descriptor.");

static PyObject *
posix_dup2(PyObject *self, PyObject *args)
{
    int fd, fd2, res;
    if (!PyArg_ParseTuple(args, "ii:dup2", &fd, &fd2))
        return NULL;
    if (!_PyVerify_fd_dup2(fd, fd2))
        return posix_error();
    Py_BEGIN_ALLOW_THREADS
    res = dup2(fd, fd2);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}


PyDoc_STRVAR(posix_lseek__doc__,
"lseek(fd, pos, how) -> newpos\n\n\
Set the current position of a file descriptor.");

static PyObject *
posix_lseek(PyObject *self, PyObject *args)
{
    int fd, how;
    off_t pos, res;
    PyObject *posobj;
    if (!PyArg_ParseTuple(args, "iOi:lseek", &fd, &posobj, &how))
        return NULL;
#ifdef SEEK_SET
    /* Turn 0, 1, 2 into SEEK_{SET,CUR,END} */
    switch (how) {
    case 0: how = SEEK_SET; break;
    case 1: how = SEEK_CUR; break;
    case 2: how = SEEK_END; break;
    }
#endif /* SEEK_END */

#if !defined(HAVE_LARGEFILE_SUPPORT)
    pos = PyInt_AsLong(posobj);
#else
    pos = PyLong_Check(posobj) ?
        PyLong_AsLongLong(posobj) : PyInt_AsLong(posobj);
#endif
    if (PyErr_Occurred())
        return NULL;

    if (!_PyVerify_fd(fd))
        return posix_error();
    Py_BEGIN_ALLOW_THREADS
    res = lseek(fd, pos, how);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();

#if !defined(HAVE_LARGEFILE_SUPPORT)
    return PyInt_FromLong(res);
#else
    return PyLong_FromLongLong(res);
#endif
}


PyDoc_STRVAR(posix_read__doc__,
"read(fd, buffersize) -> string\n\n\
Read a file descriptor.");

static PyObject *
posix_read(PyObject *self, PyObject *args)
{
    int fd, size, n;
    PyObject *buffer;
    if (!PyArg_ParseTuple(args, "ii:read", &fd, &size))
        return NULL;
    if (size < 0) {
        errno = EINVAL;
        return posix_error();
    }
    buffer = PyString_FromStringAndSize((char *)NULL, size);
    if (buffer == NULL)
        return NULL;
    if (!_PyVerify_fd(fd)) {
        Py_DECREF(buffer);
        return posix_error();
    }
    Py_BEGIN_ALLOW_THREADS
    n = read(fd, PyString_AsString(buffer), size);
    Py_END_ALLOW_THREADS
    if (n < 0) {
        Py_DECREF(buffer);
        return posix_error();
    }
    if (n != size)
        _PyString_Resize(&buffer, n);
    return buffer;
}


PyDoc_STRVAR(posix_write__doc__,
"write(fd, string) -> byteswritten\n\n\
Write a string to a file descriptor.");

static PyObject *
posix_write(PyObject *self, PyObject *args)
{
    Py_buffer pbuf;
    int fd;
    Py_ssize_t size;

    if (!PyArg_ParseTuple(args, "is*:write", &fd, &pbuf))
        return NULL;
    if (!_PyVerify_fd(fd)) {
        PyBuffer_Release(&pbuf);
        return posix_error();
    }
    Py_BEGIN_ALLOW_THREADS
    size = write(fd, pbuf.buf, (size_t)pbuf.len);
    Py_END_ALLOW_THREADS
    PyBuffer_Release(&pbuf);
    if (size < 0)
        return posix_error();
    return PyInt_FromSsize_t(size);
}


PyDoc_STRVAR(posix_fstat__doc__,
"fstat(fd) -> stat result\n\n\
Like stat(), but for an open file descriptor.");

static PyObject *
posix_fstat(PyObject *self, PyObject *args)
{
    int fd;
    STRUCT_STAT st;
    int res;
    if (!PyArg_ParseTuple(args, "i:fstat", &fd))
        return NULL;
    if (!_PyVerify_fd(fd))
        return posix_error();
    Py_BEGIN_ALLOW_THREADS
    res = FSTAT(fd, &st);
    Py_END_ALLOW_THREADS
    if (res != 0) {
      return posix_error();
    }

    return _pystat_fromstructstat(&st);
}


PyDoc_STRVAR(posix_fdopen__doc__,
"fdopen(fd [, mode='r' [, bufsize]]) -> file_object\n\n\
Return an open file object connected to a file descriptor.");

static PyObject *
posix_fdopen(PyObject *self, PyObject *args)
{
    int fd;
    char *orgmode = "r";
    int bufsize = -1;
    FILE *fp;
    PyObject *f;
    char *mode;
    if (!PyArg_ParseTuple(args, "i|si", &fd, &orgmode, &bufsize))
        return NULL;

    /* Sanitize mode.  See fileobject.c */
    mode = PyMem_MALLOC(strlen(orgmode)+3);
    if (!mode) {
        PyErr_NoMemory();
        return NULL;
    }
    strcpy(mode, orgmode);
    if (_PyFile_SanitizeMode(mode)) {
        PyMem_FREE(mode);
        return NULL;
    }
    if (!_PyVerify_fd(fd))
        return posix_error();
    Py_BEGIN_ALLOW_THREADS
#if !defined(MS_WINDOWS) && defined(HAVE_FCNTL_H)
    if (mode[0] == 'a') {
        /* try to make sure the O_APPEND flag is set */
        int flags;
        flags = fcntl(fd, F_GETFL);
        if (flags != -1)
            fcntl(fd, F_SETFL, flags | O_APPEND);
        fp = fdopen(fd, mode);
        if (fp == NULL && flags != -1)
            /* restore old mode if fdopen failed */
            fcntl(fd, F_SETFL, flags);
    } else {
        fp = fdopen(fd, mode);
    }
#else
    fp = fdopen(fd, mode);
#endif
    Py_END_ALLOW_THREADS
    PyMem_FREE(mode);
    if (fp == NULL)
        return posix_error();
    f = PyFile_FromFile(fp, "<fdopen>", orgmode, fclose);
    if (f != NULL)
        PyFile_SetBufSize(f, bufsize);
    return f;
}

PyDoc_STRVAR(posix_isatty__doc__,
"isatty(fd) -> bool\n\n\
Return True if the file descriptor 'fd' is an open file descriptor\n\
connected to the slave end of a terminal.");

static PyObject *
posix_isatty(PyObject *self, PyObject *args)
{
    int fd;
    if (!PyArg_ParseTuple(args, "i:isatty", &fd))
        return NULL;
    if (!_PyVerify_fd(fd))
        return PyBool_FromLong(0);
    return PyBool_FromLong(isatty(fd));
}

#ifdef HAVE_PIPE
PyDoc_STRVAR(posix_pipe__doc__,
"pipe() -> (read_end, write_end)\n\n\
Create a pipe.");

static PyObject *
posix_pipe(PyObject *self, PyObject *noargs)
{
#if defined(PYOS_OS2)
    HFILE read, write;
    APIRET rc;

    Py_BEGIN_ALLOW_THREADS
    rc = DosCreatePipe( &read, &write, 4096);
    Py_END_ALLOW_THREADS
    if (rc != NO_ERROR)
        return os2_error(rc);

    return Py_BuildValue("(ii)", read, write);
#else
#if !defined(MS_WINDOWS)
    int fds[2];
    int res;
    Py_BEGIN_ALLOW_THREADS
    res = pipe(fds);
    Py_END_ALLOW_THREADS
    if (res != 0)
        return posix_error();
    return Py_BuildValue("(ii)", fds[0], fds[1]);
#else /* MS_WINDOWS */
    HANDLE read, write;
    int read_fd, write_fd;
    BOOL ok;
    Py_BEGIN_ALLOW_THREADS
    ok = CreatePipe(&read, &write, NULL, 0);
    Py_END_ALLOW_THREADS
    if (!ok)
        return win32_error("CreatePipe", NULL);
    read_fd = _open_osfhandle((Py_intptr_t)read, 0);
    write_fd = _open_osfhandle((Py_intptr_t)write, 1);
    return Py_BuildValue("(ii)", read_fd, write_fd);
#endif /* MS_WINDOWS */
#endif
}
#endif  /* HAVE_PIPE */


#ifdef HAVE_MKFIFO
PyDoc_STRVAR(posix_mkfifo__doc__,
"mkfifo(filename [, mode=0666])\n\n\
Create a FIFO (a POSIX named pipe).");

static PyObject *
posix_mkfifo(PyObject *self, PyObject *args)
{
    char *filename;
    int mode = 0666;
    int res;
    if (!PyArg_ParseTuple(args, "s|i:mkfifo", &filename, &mode))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = mkfifo(filename, mode);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif


#if defined(HAVE_MKNOD) && defined(HAVE_MAKEDEV)
PyDoc_STRVAR(posix_mknod__doc__,
"mknod(filename [, mode=0600, device])\n\n\
Create a filesystem node (file, device special file or named pipe)\n\
named filename. mode specifies both the permissions to use and the\n\
type of node to be created, being combined (bitwise OR) with one of\n\
S_IFREG, S_IFCHR, S_IFBLK, and S_IFIFO. For S_IFCHR and S_IFBLK,\n\
device defines the newly created device special file (probably using\n\
os.makedev()), otherwise it is ignored.");


static PyObject *
posix_mknod(PyObject *self, PyObject *args)
{
    char *filename;
    int mode = 0600;
    int device = 0;
    int res;
    if (!PyArg_ParseTuple(args, "s|ii:mknod", &filename, &mode, &device))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = mknod(filename, mode, device);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif

#ifdef HAVE_DEVICE_MACROS
PyDoc_STRVAR(posix_major__doc__,
"major(device) -> major number\n\
Extracts a device major number from a raw device number.");

static PyObject *
posix_major(PyObject *self, PyObject *args)
{
    int device;
    if (!PyArg_ParseTuple(args, "i:major", &device))
        return NULL;
    return PyInt_FromLong((long)major(device));
}

PyDoc_STRVAR(posix_minor__doc__,
"minor(device) -> minor number\n\
Extracts a device minor number from a raw device number.");

static PyObject *
posix_minor(PyObject *self, PyObject *args)
{
    int device;
    if (!PyArg_ParseTuple(args, "i:minor", &device))
        return NULL;
    return PyInt_FromLong((long)minor(device));
}

PyDoc_STRVAR(posix_makedev__doc__,
"makedev(major, minor) -> device number\n\
Composes a raw device number from the major and minor device numbers.");

static PyObject *
posix_makedev(PyObject *self, PyObject *args)
{
    int major, minor;
    if (!PyArg_ParseTuple(args, "ii:makedev", &major, &minor))
        return NULL;
    return PyInt_FromLong((long)makedev(major, minor));
}
#endif /* device macros */


#ifdef HAVE_FTRUNCATE
PyDoc_STRVAR(posix_ftruncate__doc__,
"ftruncate(fd, length)\n\n\
Truncate a file to a specified length.");

static PyObject *
posix_ftruncate(PyObject *self, PyObject *args)
{
    int fd;
    off_t length;
    int res;
    PyObject *lenobj;

    if (!PyArg_ParseTuple(args, "iO:ftruncate", &fd, &lenobj))
        return NULL;

#if !defined(HAVE_LARGEFILE_SUPPORT)
    length = PyInt_AsLong(lenobj);
#else
    length = PyLong_Check(lenobj) ?
        PyLong_AsLongLong(lenobj) : PyInt_AsLong(lenobj);
#endif
    if (PyErr_Occurred())
        return NULL;

    Py_BEGIN_ALLOW_THREADS
    res = ftruncate(fd, length);
    Py_END_ALLOW_THREADS
    if (res < 0)
        return posix_error();
    Py_INCREF(Py_None);
    return Py_None;
}
#endif

#ifdef HAVE_PUTENV
PyDoc_STRVAR(posix_putenv__doc__,
"putenv(key, value)\n\n\
Change or add an environment variable.");

/* Save putenv() parameters as values here, so we can collect them when they
 * get re-set with another call for the same key. */
static PyObject *posix_putenv_garbage;

static PyObject *
posix_putenv(PyObject *self, PyObject *args)
{
    char *s1, *s2;
    char *newenv;
    PyObject *newstr;
    size_t len;

    if (!PyArg_ParseTuple(args, "ss:putenv", &s1, &s2))
        return NULL;

#if defined(PYOS_OS2)
    if (stricmp(s1, "BEGINLIBPATH") == 0) {
        APIRET rc;

        rc = DosSetExtLIBPATH(s2, BEGIN_LIBPATH);
        if (rc != NO_ERROR)
            return os2_error(rc);

    } else if (stricmp(s1, "ENDLIBPATH") == 0) {
        APIRET rc;

        rc = DosSetExtLIBPATH(s2, END_LIBPATH);
        if (rc != NO_ERROR)
            return os2_error(rc);
    } else {
#endif

    /* XXX This can leak memory -- not easy to fix :-( */
    len = strlen(s1) + strlen(s2) + 2;
    /* len includes space for a trailing \0; the size arg to
       PyString_FromStringAndSize does not count that */
    newstr = PyString_FromStringAndSize(NULL, (int)len - 1);
    if (newstr == NULL)
        return PyErr_NoMemory();
    newenv = PyString_AS_STRING(newstr);
    PyOS_snprintf(newenv, len, "%s=%s", s1, s2);
    if (putenv(newenv)) {
        Py_DECREF(newstr);
        posix_error();
        return NULL;
    }
    /* Install the first arg and newstr in posix_putenv_garbage;
     * this will cause previous value to be collected.  This has to
     * happen after the real putenv() call because the old value
     * was still accessible until then. */
    if (PyDict_SetItem(posix_putenv_garbage,
                       PyTuple_GET_ITEM(args, 0), newstr)) {
        /* really not much we can do; just leak */
        PyErr_Clear();
    }
    else {
        Py_DECREF(newstr);
    }

#if defined(PYOS_OS2)
    }
#endif
    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* putenv */

#ifdef HAVE_UNSETENV
PyDoc_STRVAR(posix_unsetenv__doc__,
"unsetenv(key)\n\n\
Delete an environment variable.");

static PyObject *
posix_unsetenv(PyObject *self, PyObject *args)
{
    char *s1;

    if (!PyArg_ParseTuple(args, "s:unsetenv", &s1))
        return NULL;

    unsetenv(s1);

    /* Remove the key from posix_putenv_garbage;
     * this will cause it to be collected.  This has to
     * happen after the real unsetenv() call because the
     * old value was still accessible until then.
     */
    if (PyDict_DelItem(posix_putenv_garbage,
                       PyTuple_GET_ITEM(args, 0))) {
        /* really not much we can do; just leak */
        PyErr_Clear();
    }

    Py_INCREF(Py_None);
    return Py_None;
}
#endif /* unsetenv */

PyDoc_STRVAR(posix_strerror__doc__,
"strerror(code) -> string\n\n\
Translate an error code to a message string.");

static PyObject *
posix_strerror(PyObject *self, PyObject *args)
{
    int code;
    char *message;
    if (!PyArg_ParseTuple(args, "i:strerror", &code))
        return NULL;
    message = strerror(code);
    if (message == NULL) {
        PyErr_SetString(PyExc_ValueError,
                        "strerror() argument out of range");
        return NULL;
    }
    return PyString_FromString(message);
}


#ifdef HAVE_SYS_WAIT_H

#ifdef WCOREDUMP
PyDoc_STRVAR(posix_WCOREDUMP__doc__,
"WCOREDUMP(status) -> bool\n\n\
Return True if the process returning 'status' was dumped to a core file.");

static PyObject *
posix_WCOREDUMP(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WCOREDUMP", &WAIT_STATUS_INT(status)))
        return NULL;

    return PyBool_FromLong(WCOREDUMP(status));
}
#endif /* WCOREDUMP */

#ifdef WIFCONTINUED
PyDoc_STRVAR(posix_WIFCONTINUED__doc__,
"WIFCONTINUED(status) -> bool\n\n\
Return True if the process returning 'status' was continued from a\n\
job control stop.");

static PyObject *
posix_WIFCONTINUED(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WCONTINUED", &WAIT_STATUS_INT(status)))
        return NULL;

    return PyBool_FromLong(WIFCONTINUED(status));
}
#endif /* WIFCONTINUED */

#ifdef WIFSTOPPED
PyDoc_STRVAR(posix_WIFSTOPPED__doc__,
"WIFSTOPPED(status) -> bool\n\n\
Return True if the process returning 'status' was stopped.");

static PyObject *
posix_WIFSTOPPED(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WIFSTOPPED", &WAIT_STATUS_INT(status)))
        return NULL;

    return PyBool_FromLong(WIFSTOPPED(status));
}
#endif /* WIFSTOPPED */

#ifdef WIFSIGNALED
PyDoc_STRVAR(posix_WIFSIGNALED__doc__,
"WIFSIGNALED(status) -> bool\n\n\
Return True if the process returning 'status' was terminated by a signal.");

static PyObject *
posix_WIFSIGNALED(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WIFSIGNALED", &WAIT_STATUS_INT(status)))
        return NULL;

    return PyBool_FromLong(WIFSIGNALED(status));
}
#endif /* WIFSIGNALED */

#ifdef WIFEXITED
PyDoc_STRVAR(posix_WIFEXITED__doc__,
"WIFEXITED(status) -> bool\n\n\
Return true if the process returning 'status' exited using the exit()\n\
system call.");

static PyObject *
posix_WIFEXITED(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WIFEXITED", &WAIT_STATUS_INT(status)))
        return NULL;

    return PyBool_FromLong(WIFEXITED(status));
}
#endif /* WIFEXITED */

#ifdef WEXITSTATUS
PyDoc_STRVAR(posix_WEXITSTATUS__doc__,
"WEXITSTATUS(status) -> integer\n\n\
Return the process return code from 'status'.");

static PyObject *
posix_WEXITSTATUS(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WEXITSTATUS", &WAIT_STATUS_INT(status)))
        return NULL;

    return Py_BuildValue("i", WEXITSTATUS(status));
}
#endif /* WEXITSTATUS */

#ifdef WTERMSIG
PyDoc_STRVAR(posix_WTERMSIG__doc__,
"WTERMSIG(status) -> integer\n\n\
Return the signal that terminated the process that provided the 'status'\n\
value.");

static PyObject *
posix_WTERMSIG(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WTERMSIG", &WAIT_STATUS_INT(status)))
        return NULL;

    return Py_BuildValue("i", WTERMSIG(status));
}
#endif /* WTERMSIG */

#ifdef WSTOPSIG
PyDoc_STRVAR(posix_WSTOPSIG__doc__,
"WSTOPSIG(status) -> integer\n\n\
Return the signal that stopped the process that provided\n\
the 'status' value.");

static PyObject *
posix_WSTOPSIG(PyObject *self, PyObject *args)
{
    WAIT_TYPE status;
    WAIT_STATUS_INT(status) = 0;

    if (!PyArg_ParseTuple(args, "i:WSTOPSIG", &WAIT_STATUS_INT(status)))
        return NULL;

    return Py_BuildValue("i", WSTOPSIG(status));
}
#endif /* WSTOPSIG */

#endif /* HAVE_SYS_WAIT_H */


#if defined(HAVE_FSTATVFS) && defined(HAVE_SYS_STATVFS_H)
#ifdef _SCO_DS
/* SCO OpenServer 5.0 and later requires _SVID3 before it reveals the
   needed definitions in sys/statvfs.h */
#define _SVID3
#endif
#include <sys/statvfs.h>

static PyObject*
_pystatvfs_fromstructstatvfs(struct statvfs st) {
    PyObject *v = PyStructSequence_New(&StatVFSResultType);
    if (v == NULL)
        return NULL;

#if !defined(HAVE_LARGEFILE_SUPPORT)
    PyStructSequence_SET_ITEM(v, 0, PyInt_FromLong((long) st.f_bsize));
    PyStructSequence_SET_ITEM(v, 1, PyInt_FromLong((long) st.f_frsize));
    PyStructSequence_SET_ITEM(v, 2, PyInt_FromLong((long) st.f_blocks));
    PyStructSequence_SET_ITEM(v, 3, PyInt_FromLong((long) st.f_bfree));
    PyStructSequence_SET_ITEM(v, 4, PyInt_FromLong((long) st.f_bavail));
    PyStructSequence_SET_ITEM(v, 5, PyInt_FromLong((long) st.f_files));
    PyStructSequence_SET_ITEM(v, 6, PyInt_FromLong((long) st.f_ffree));
    PyStructSequence_SET_ITEM(v, 7, PyInt_FromLong((long) st.f_favail));
    PyStructSequence_SET_ITEM(v, 8, PyInt_FromLong((long) st.f_flag));
    PyStructSequence_SET_ITEM(v, 9, PyInt_FromLong((long) st.f_namemax));
#else
    PyStructSequence_SET_ITEM(v, 0, PyInt_FromLong((long) st.f_bsize));
    PyStructSequence_SET_ITEM(v, 1, PyInt_FromLong((long) st.f_frsize));
    PyStructSequence_SET_ITEM(v, 2,
                              PyLong_FromLongLong((PY_LONG_LONG) st.f_blocks));
    PyStructSequence_SET_ITEM(v, 3,
                              PyLong_FromLongLong((PY_LONG_LONG) st.f_bfree));
    PyStructSequence_SET_ITEM(v, 4,
                              PyLong_FromLongLong((PY_LONG_LONG) st.f_bavail));
    PyStructSequence_SET_ITEM(v, 5,
                              PyLong_FromLongLong((PY_LONG_LONG) st.f_files));
    PyStructSequence_SET_ITEM(v, 6,
                              PyLong_FromLongLong((PY_LONG_LONG) st.f_ffree));
    PyStructSequence_SET_ITEM(v, 7,
                              PyLong_FromLongLong((PY_LONG_LONG) st.f_favail));
    PyStructSequence_SET_ITEM(v, 8, PyInt_FromLong((long) st.f_flag));
    PyStructSequence_SET_ITEM(v, 9, PyInt_FromLong((long) st.f_namemax));
#endif

    return v;
}

PyDoc_STRVAR(posix_fstatvfs__doc__,
"fstatvfs(fd) -> statvfs result\n\n\
Perform an fstatvfs system call on the given fd.");

static PyObject *
posix_fstatvfs(PyObject *self, PyObject *args)
{
    int fd, res;
    struct statvfs st;

    if (!PyArg_ParseTuple(args, "i:fstatvfs", &fd))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = fstatvfs(fd, &st);
    Py_END_ALLOW_THREADS
    if (res != 0)
        return posix_error();

    return _pystatvfs_fromstructstatvfs(st);
}
#endif /* HAVE_FSTATVFS && HAVE_SYS_STATVFS_H */


#if defined(HAVE_STATVFS) && defined(HAVE_SYS_STATVFS_H)
#include <sys/statvfs.h>

PyDoc_STRVAR(posix_statvfs__doc__,
"statvfs(path) -> statvfs result\n\n\
Perform a statvfs system call on the given path.");

static PyObject *
posix_statvfs(PyObject *self, PyObject *args)
{
    char *path;
    int res;
    struct statvfs st;
    if (!PyArg_ParseTuple(args, "s:statvfs", &path))
        return NULL;
    Py_BEGIN_ALLOW_THREADS
    res = statvfs(path, &st);
    Py_END_ALLOW_THREADS
    if (res != 0)
        return posix_error_with_filename(path);

    return _pystatvfs_fromstructstatvfs(st);
}
#endif /* HAVE_STATVFS */


#ifdef HAVE_TEMPNAM
PyDoc_STRVAR(posix_tempnam__doc__,
"tempnam([dir[, prefix]]) -> string\n\n\
Return a unique name for a temporary file.\n\
The directory and a prefix may be specified as strings; they may be omitted\n\
or None if not needed.");

static PyObject *
posix_tempnam(PyObject *self, PyObject *args)
{
    PyObject *result = NULL;
    char *dir = NULL;
    char *pfx = NULL;
    char *name;

    if (!PyArg_ParseTuple(args, "|zz:tempnam", &dir, &pfx))
    return NULL;

    if (PyErr_Warn(PyExc_RuntimeWarning,
                   "tempnam is a potential security risk to your program") < 0)
        return NULL;

    if (PyErr_WarnPy3k("tempnam has been removed in 3.x; "
                       "use the tempfile module", 1) < 0)
        return NULL;

    name = tempnam(dir, pfx);
    if (name == NULL)
        return PyErr_NoMemory();
    result = PyString_FromString(name);
    free(name);
    return result;
}
#endif


#ifdef HAVE_TMPFILE
PyDoc_STRVAR(posix_tmpfile__doc__,
"tmpfile() -> file object\n\n\
Create a temporary file with no directory entries.");

static PyObject *
posix_tmpfile(PyObject *self, PyObject *noargs)
{
    FILE *fp;

    if (PyErr_WarnPy3k("tmpfile has been removed in 3.x; "
                       "use the tempfile module", 1) < 0)
        return NULL;

    fp = tmpfile();
    if (fp == NULL)
        return posix_error();
    return PyFile_FromFile(fp, "<tmpfile>", "w+b", fclose);
}
#endif


#ifdef HAVE_TMPNAM
PyDoc_STRVAR(posix_tmpnam__doc__,
"tmpnam() -> string\n\n\
Return a unique name for a temporary file.");

static PyObject *
posix_tmpnam(PyObject *self, PyObject *noargs)
{
    char buffer[L_tmpnam];
    char *name;

    if (PyErr_Warn(PyExc_RuntimeWarning,
                   "tmpnam is a potential security risk to your program") < 0)
        return NULL;

    if (PyErr_WarnPy3k("tmpnam has been removed in 3.x; "
                       "use the tempfile module", 1) < 0)
        return NULL;

#ifdef USE_TMPNAM_R
    name = tmpnam_r(buffer);
#else
    name = tmpnam(buffer);
#endif
    if (name == NULL) {
        PyObject *err = Py_BuildValue("is", 0,
#ifdef USE_TMPNAM_R
                                      "unexpected NULL from tmpnam_r"
#else
                                      "unexpected NULL from tmpnam"
#endif
                                      );
        PyErr_SetObject(PyExc_OSError, err);
        Py_XDECREF(err);
        return NULL;
    }
    return PyString_FromString(buffer);
}
#endif


/* This is used for fpathconf(), pathconf(), confstr() and sysconf().
 * It maps strings representing configuration variable names to
 * integer values, allowing those functions to be called with the
 * magic names instead of polluting the module's namespace with tons of
 * rarely-used constants.  There are three separate tables that use
 * these definitions.
 *
 * This code is always included, even if none of the interfaces that
 * need it are included.  The #if hackery needed to avoid it would be
 * sufficiently pervasive that it's not worth the loss of readability.
 */
struct constdef {
    char *name;
    long value;
};

#ifndef UEFI_C_SOURCE
static int
conv_confname(PyObject *arg, int *valuep, struct constdef *table,
              size_t tablesize)
{
    if (PyInt_Check(arg)) {
        *valuep = PyInt_AS_LONG(arg);
        return 1;
    }
    if (PyString_Check(arg)) {
        /* look up the value in the table using a binary search */
        size_t lo = 0;
        size_t mid;
        size_t hi = tablesize;
        int cmp;
        char *confname = PyString_AS_STRING(arg);
        while (lo < hi) {
            mid = (lo + hi) / 2;
            cmp = strcmp(confname, table[mid].name);
            if (cmp < 0)
                hi = mid;
            else if (cmp > 0)
                lo = mid + 1;
            else {
                *valuep = table[mid].value;
                return 1;
            }
        }
        PyErr_SetString(PyExc_ValueError, "unrecognized configuration name");
    }
    else
        PyErr_SetString(PyExc_TypeError,
                        "configuration names must be strings or integers");
    return 0;
}
#endif  /* UEFI_C_SOURCE */

#if defined(HAVE_FPATHCONF) || defined(HAVE_PATHCONF)
static struct constdef  posix_constants_pathconf[] = {
#ifdef _PC_ABI_AIO_XFER_MAX
    {"PC_ABI_AIO_XFER_MAX",     _PC_ABI_AIO_XFER_MAX},
#endif
#ifdef _PC_ABI_ASYNC_IO
    {"PC_ABI_ASYNC_IO", _PC_ABI_ASYNC_IO},
#endif
#ifdef _PC_ASYNC_IO
    {"PC_ASYNC_IO",     _PC_ASYNC_IO},
#endif
#ifdef _PC_CHOWN_RESTRICTED
    {"PC_CHOWN_RESTRICTED",     _PC_CHOWN_RESTRICTED},
#endif
#ifdef _PC_FILESIZEBITS
    {"PC_FILESIZEBITS", _PC_FILESIZEBITS},
#endif
#ifdef _PC_LAST
    {"PC_LAST", _PC_LAST},
#endif
#ifdef _PC_LINK_MAX
    {"PC_LINK_MAX",     _PC_LINK_MAX},
#endif
#ifdef _PC_MAX_CANON
    {"PC_MAX_CANON",    _PC_MAX_CANON},
#endif
#ifdef _PC_MAX_INPUT
    {"PC_MAX_INPUT",    _PC_MAX_INPUT},
#endif
#ifdef _PC_NAME_MAX
    {"PC_NAME_MAX",     _PC_NAME_MAX},
#endif
#ifdef _PC_NO_TRUNC
    {"PC_NO_TRUNC",     _PC_NO_TRUNC},
#endif
#ifdef _PC_PATH_MAX
    {"PC_PATH_MAX",     _PC_PATH_MAX},
#endif
#ifdef _PC_PIPE_BUF
    {"PC_PIPE_BUF",     _PC_PIPE_BUF},
#endif
#ifdef _PC_PRIO_IO
    {"PC_PRIO_IO",      _PC_PRIO_IO},
#endif
#ifdef _PC_SOCK_MAXBUF
    {"PC_SOCK_MAXBUF",  _PC_SOCK_MAXBUF},
#endif
#ifdef _PC_SYNC_IO
    {"PC_SYNC_IO",      _PC_SYNC_IO},
#endif
#ifdef _PC_VDISABLE
    {"PC_VDISABLE",     _PC_VDISABLE},
#endif
};

static int
conv_path_confname(PyObject *arg, int *valuep)
{
    return conv_confname(arg, valuep, posix_constants_pathconf,
                         sizeof(posix_constants_pathconf)
                           / sizeof(struct constdef));
}
#endif

#ifdef HAVE_FPATHCONF
PyDoc_STRVAR(posix_fpathconf__doc__,
"fpathconf(fd, name) -> integer\n\n\
Return the configuration limit name for the file descriptor fd.\n\
If there is no limit, return -1.");

static PyObject *
posix_fpathconf(PyObject *self, PyObject *args)
{
    PyObject *result = NULL;
    int name, fd;

    if (PyArg_ParseTuple(args, "iO&:fpathconf", &fd,
                         conv_path_confname, &name)) {
        long limit;

        errno = 0;
        limit = fpathconf(fd, name);
        if (limit == -1 && errno != 0)
            posix_error();
        else
            result = PyInt_FromLong(limit);
    }
    return result;
}
#endif


#ifdef HAVE_PATHCONF
PyDoc_STRVAR(posix_pathconf__doc__,
"pathconf(path, name) -> integer\n\n\
Return the configuration limit name for the file or directory path.\n\
If there is no limit, return -1.");

static PyObject *
posix_pathconf(PyObject *self, PyObject *args)
{
    PyObject *result = NULL;
    int name;
    char *path;

    if (PyArg_ParseTuple(args, "sO&:pathconf", &path,
                         conv_path_confname, &name)) {
    long limit;

    errno = 0;
    limit = pathconf(path, name);
    if (limit == -1 && errno != 0) {
        if (errno == EINVAL)
            /* could be a path or name problem */
            posix_error();
        else
            posix_error_with_filename(path);
    }
    else
        result = PyInt_FromLong(limit);
    }
    return result;
}
#endif

#ifdef HAVE_CONFSTR
static struct constdef posix_constants_confstr[] = {
#ifdef _CS_ARCHITECTURE
    {"CS_ARCHITECTURE", _CS_ARCHITECTURE},
#endif
#ifdef _CS_HOSTNAME
    {"CS_HOSTNAME",     _CS_HOSTNAME},
#endif
#ifdef _CS_HW_PROVIDER
    {"CS_HW_PROVIDER",  _CS_HW_PROVIDER},
#endif
#ifdef _CS_HW_SERIAL
    {"CS_HW_SERIAL",    _CS_HW_SERIAL},
#endif
#ifdef _CS_INITTAB_NAME
    {"CS_INITTAB_NAME", _CS_INITTAB_NAME},
#endif
#ifdef _CS_LFS64_CFLAGS
    {"CS_LFS64_CFLAGS", _CS_LFS64_CFLAGS},
#endif
#ifdef _CS_LFS64_LDFLAGS
    {"CS_LFS64_LDFLAGS",        _CS_LFS64_LDFLAGS},
#endif
#ifdef _CS_LFS64_LIBS
    {"CS_LFS64_LIBS",   _CS_LFS64_LIBS},
#endif
#ifdef _CS_LFS64_LINTFLAGS
    {"CS_LFS64_LINTFLAGS",      _CS_LFS64_LINTFLAGS},
#endif
#ifdef _CS_LFS_CFLAGS
    {"CS_LFS_CFLAGS",   _CS_LFS_CFLAGS},
#endif
#ifdef _CS_LFS_LDFLAGS
    {"CS_LFS_LDFLAGS",  _CS_LFS_LDFLAGS},
#endif
#ifdef _CS_LFS_LIBS
    {"CS_LFS_LIBS",     _CS_LFS_LIBS},
#endif
#ifdef _CS_LFS_LINTFLAGS
    {"CS_LFS_LINTFLAGS",        _CS_LFS_LINTFLAGS},
#endif
#ifdef _CS_MACHINE
    {"CS_MACHINE",      _CS_MACHINE},
#endif
#ifdef _CS_PATH
    {"CS_PATH", _CS_PATH},
#endif
#ifdef _CS_RELEASE
    {"CS_RELEASE",      _CS_RELEASE},
#endif
#ifdef _CS_SRPC_DOMAIN
    {"CS_SRPC_DOMAIN",  _CS_SRPC_DOMAIN},
#endif
#ifdef _CS_SYSNAME
    {"CS_SYSNAME",      _CS_SYSNAME},
#endif
#ifdef _CS_VERSION
    {"CS_VERSION",      _CS_VERSION},
#endif
#ifdef _CS_XBS5_ILP32_OFF32_CFLAGS
    {"CS_XBS5_ILP32_OFF32_CFLAGS",      _CS_XBS5_ILP32_OFF32_CFLAGS},
#endif
#ifdef _CS_XBS5_ILP32_OFF32_LDFLAGS
    {"CS_XBS5_ILP32_OFF32_LDFLAGS",     _CS_XBS5_ILP32_OFF32_LDFLAGS},
#endif
#ifdef _CS_XBS5_ILP32_OFF32_LIBS
    {"CS_XBS5_ILP32_OFF32_LIBS",        _CS_XBS5_ILP32_OFF32_LIBS},
#endif
#ifdef _CS_XBS5_ILP32_OFF32_LINTFLAGS
    {"CS_XBS5_ILP32_OFF32_LINTFLAGS",   _CS_XBS5_ILP32_OFF32_LINTFLAGS},
#endif
#ifdef _CS_XBS5_ILP32_OFFBIG_CFLAGS
    {"CS_XBS5_ILP32_OFFBIG_CFLAGS",     _CS_XBS5_ILP32_OFFBIG_CFLAGS},
#endif
#ifdef _CS_XBS5_ILP32_OFFBIG_LDFLAGS
    {"CS_XBS5_ILP32_OFFBIG_LDFLAGS",    _CS_XBS5_ILP32_OFFBIG_LDFLAGS},
#endif
#ifdef _CS_XBS5_ILP32_OFFBIG_LIBS
    {"CS_XBS5_ILP32_OFFBIG_LIBS",       _CS_XBS5_ILP32_OFFBIG_LIBS},
#endif
#ifdef _CS_XBS5_ILP32_OFFBIG_LINTFLAGS
    {"CS_XBS5_ILP32_OFFBIG_LINTFLAGS",  _CS_XBS5_ILP32_OFFBIG_LINTFLAGS},
#endif
#ifdef _CS_XBS5_LP64_OFF64_CFLAGS
    {"CS_XBS5_LP64_OFF64_CFLAGS",       _CS_XBS5_LP64_OFF64_CFLAGS},
#endif
#ifdef _CS_XBS5_LP64_OFF64_LDFLAGS
    {"CS_XBS5_LP64_OFF64_LDFLAGS",      _CS_XBS5_LP64_OFF64_LDFLAGS},
#endif
#ifdef _CS_XBS5_LP64_OFF64_LIBS
    {"CS_XBS5_LP64_OFF64_LIBS", _CS_XBS5_LP64_OFF64_LIBS},
#endif
#ifdef _CS_XBS5_LP64_OFF64_LINTFLAGS
    {"CS_XBS5_LP64_OFF64_LINTFLAGS",    _CS_XBS5_LP64_OFF64_LINTFLAGS},
#endif
#ifdef _CS_XBS5_LPBIG_OFFBIG_CFLAGS
    {"CS_XBS5_LPBIG_OFFBIG_CFLAGS",     _CS_XBS5_LPBIG_OFFBIG_CFLAGS},
#endif
#ifdef _CS_XBS5_LPBIG_OFFBIG_LDFLAGS
    {"CS_XBS5_LPBIG_OFFBIG_LDFLAGS",    _CS_XBS5_LPBIG_OFFBIG_LDFLAGS},
#endif
#ifdef _CS_XBS5_LPBIG_OFFBIG_LIBS
    {"CS_XBS5_LPBIG_OFFBIG_LIBS",       _CS_XBS5_LPBIG_OFFBIG_LIBS},
#endif
#ifdef _CS_XBS5_LPBIG_OFFBIG_LINTFLAGS
    {"CS_XBS5_LPBIG_OFFBIG_LINTFLAGS",  _CS_XBS5_LPBIG_OFFBIG_LINTFLAGS},
#endif
#ifdef _MIPS_CS_AVAIL_PROCESSORS
    {"MIPS_CS_AVAIL_PROCESSORS",        _MIPS_CS_AVAIL_PROCESSORS},
#endif
#ifdef _MIPS_CS_BASE
    {"MIPS_CS_BASE",    _MIPS_CS_BASE},
#endif
#ifdef _MIPS_CS_HOSTID
    {"MIPS_CS_HOSTID",  _MIPS_CS_HOSTID},
#endif
#ifdef _MIPS_CS_HW_NAME
    {"MIPS_CS_HW_NAME", _MIPS_CS_HW_NAME},
#endif
#ifdef _MIPS_CS_NUM_PROCESSORS
    {"MIPS_CS_NUM_PROCESSORS",  _MIPS_CS_NUM_PROCESSORS},
#endif
#ifdef _MIPS_CS_OSREL_MAJ
    {"MIPS_CS_OSREL_MAJ",       _MIPS_CS_OSREL_MAJ},
#endif
#ifdef _MIPS_CS_OSREL_MIN
    {"MIPS_CS_OSREL_MIN",       _MIPS_CS_OSREL_MIN},
#endif
#ifdef _MIPS_CS_OSREL_PATCH
    {"MIPS_CS_OSREL_PATCH",     _MIPS_CS_OSREL_PATCH},
#endif
#ifdef _MIPS_CS_OS_NAME
    {"MIPS_CS_OS_NAME", _MIPS_CS_OS_NAME},
#endif
#ifdef _MIPS_CS_OS_PROVIDER
    {"MIPS_CS_OS_PROVIDER",     _MIPS_CS_OS_PROVIDER},
#endif
#ifdef _MIPS_CS_PROCESSORS
    {"MIPS_CS_PROCESSORS",      _MIPS_CS_PROCESSORS},
#endif
#ifdef _MIPS_CS_SERIAL
    {"MIPS_CS_SERIAL",  _MIPS_CS_SERIAL},
#endif
#ifdef _MIPS_CS_VENDOR
    {"MIPS_CS_VENDOR",  _MIPS_CS_VENDOR},
#endif
};

static int
conv_confstr_confname(PyObject *arg, int *valuep)
{
    return conv_confname(arg, valuep, posix_constants_confstr,
                         sizeof(posix_constants_confstr)
                           / sizeof(struct constdef));
}

PyDoc_STRVAR(posix_confstr__doc__,
"confstr(name) -> string\n\n\
Return a string-valued system configuration variable.");

static PyObject *
posix_confstr(PyObject *self, PyObject *args)
{
    PyObject *result = NULL;
    int name;
    char buffer[256];

    if (PyArg_ParseTuple(args, "O&:confstr", conv_confstr_confname, &name)) {
    int len;

    errno = 0;
    len = confstr(name, buffer, sizeof(buffer));
    if (len == 0) {
        if (errno) {
        posix_error();
        }
        else {
        result = Py_None;
        Py_INCREF(Py_None);
        }
    }
    else {
        if ((unsigned int)len >= sizeof(buffer)) {
        result = PyString_FromStringAndSize(NULL, len-1);
        if (result != NULL)
            confstr(name, PyString_AS_STRING(result), len);
        }
        else
        result = PyString_FromStringAndSize(buffer, len-1);
    }
    }
    return result;
}
#endif


#ifdef HAVE_SYSCONF
static struct constdef posix_constants_sysconf[] = {
#ifdef _SC_2_CHAR_TERM
    {"SC_2_CHAR_TERM",  _SC_2_CHAR_TERM},
#endif
#ifdef _SC_2_C_BIND
    {"SC_2_C_BIND",     _SC_2_C_BIND},
#endif
#ifdef _SC_2_C_DEV
    {"SC_2_C_DEV",      _SC_2_C_DEV},
#endif
#ifdef _SC_2_C_VERSION
    {"SC_2_C_VERSION",  _SC_2_C_VERSION},
#endif
#ifdef _SC_2_FORT_DEV
    {"SC_2_FORT_DEV",   _SC_2_FORT_DEV},
#endif
#ifdef _SC_2_FORT_RUN
    {"SC_2_FORT_RUN",   _SC_2_FORT_RUN},
#endif
#ifdef _SC_2_LOCALEDEF
    {"SC_2_LOCALEDEF",  _SC_2_LOCALEDEF},
#endif
#ifdef _SC_2_SW_DEV
    {"SC_2_SW_DEV",     _SC_2_SW_DEV},
#endif
#ifdef _SC_2_UPE
    {"SC_2_UPE",        _SC_2_UPE},
#endif
#ifdef _SC_2_VERSION
    {"SC_2_VERSION",    _SC_2_VERSION},
#endif
#ifdef _SC_ABI_ASYNCHRONOUS_IO
    {"SC_ABI_ASYNCHRONOUS_IO",  _SC_ABI_ASYNCHRONOUS_IO},
#endif
#ifdef _SC_ACL
    {"SC_ACL",  _SC_ACL},
#endif
#ifdef _SC_AIO_LISTIO_MAX
    {"SC_AIO_LISTIO_MAX",       _SC_AIO_LISTIO_MAX},
#endif
#ifdef _SC_AIO_MAX
    {"SC_AIO_MAX",      _SC_AIO_MAX},
#endif
#ifdef _SC_AIO_PRIO_DELTA_MAX
    {"SC_AIO_PRIO_DELTA_MAX",   _SC_AIO_PRIO_DELTA_MAX},
#endif
#ifdef _SC_ARG_MAX
    {"SC_ARG_MAX",      _SC_ARG_MAX},
#endif
#ifdef _SC_ASYNCHRONOUS_IO
    {"SC_ASYNCHRONOUS_IO",      _SC_ASYNCHRONOUS_IO},
#endif
#ifdef _SC_ATEXIT_MAX
    {"SC_ATEXIT_MAX",   _SC_ATEXIT_MAX},
#endif
#ifdef _SC_AUDIT
    {"SC_AUDIT",        _SC_AUDIT},
#endif
#ifdef _SC_AVPHYS_PAGES
    {"SC_AVPHYS_PAGES", _SC_AVPHYS_PAGES},
#endif
#ifdef _SC_BC_BASE_MAX
    {"SC_BC_BASE_MAX",  _SC_BC_BASE_MAX},
#endif
#ifdef _SC_BC_DIM_MAX
    {"SC_BC_DIM_MAX",   _SC_BC_DIM_MAX},
#endif
#ifdef _SC_BC_SCALE_MAX
    {"SC_BC_SCALE_MAX", _SC_BC_SCALE_MAX},
#endif
#ifdef _SC_BC_STRING_MAX
    {"SC_BC_STRING_MAX",        _SC_BC_STRING_MAX},
#endif
#ifdef _SC_CAP
    {"SC_CAP",  _SC_CAP},
#endif
#ifdef _SC_CHARCLASS_NAME_MAX
    {"SC_CHARCLASS_NAME_MAX",   _SC_CHARCLASS_NAME_MAX},
#endif
#ifdef _SC_CHAR_BIT
    {"SC_CHAR_BIT",     _SC_CHAR_BIT},
#endif
#ifdef _SC_CHAR_MAX
    {"SC_CHAR_MAX",     _SC_CHAR_MAX},
#endif
#ifdef _SC_CHAR_MIN
    {"SC_CHAR_MIN",     _SC_CHAR_MIN},
#endif
#ifdef _SC_CHILD_MAX
    {"SC_CHILD_MAX",    _SC_CHILD_MAX},
#endif
#ifdef _SC_CLK_TCK
    {"SC_CLK_TCK",      _SC_CLK_TCK},
#endif
#ifdef _SC_COHER_BLKSZ
    {"SC_COHER_BLKSZ",  _SC_COHER_BLKSZ},
#endif
#ifdef _SC_COLL_WEIGHTS_MAX
    {"SC_COLL_WEIGHTS_MAX",     _SC_COLL_WEIGHTS_MAX},
#endif
#ifdef _SC_DCACHE_ASSOC
    {"SC_DCACHE_ASSOC", _SC_DCACHE_ASSOC},
#endif
#ifdef _SC_DCACHE_BLKSZ
    {"SC_DCACHE_BLKSZ", _SC_DCACHE_BLKSZ},
#endif
#ifdef _SC_DCACHE_LINESZ
    {"SC_DCACHE_LINESZ",        _SC_DCACHE_LINESZ},
#endif
#ifdef _SC_DCACHE_SZ
    {"SC_DCACHE_SZ",    _SC_DCACHE_SZ},
#endif
#ifdef _SC_DCACHE_TBLKSZ
    {"SC_DCACHE_TBLKSZ",        _SC_DCACHE_TBLKSZ},
#endif
#ifdef _SC_DELAYTIMER_MAX
    {"SC_DELAYTIMER_MAX",       _SC_DELAYTIMER_MAX},
#endif
#ifdef _SC_EQUIV_CLASS_MAX
    {"SC_EQUIV_CLASS_MAX",      _SC_EQUIV_CLASS_MAX},
#endif
#ifdef _SC_EXPR_NEST_MAX
    {"SC_EXPR_NEST_MAX",        _SC_EXPR_NEST_MAX},
#endif
#ifdef _SC_FSYNC
    {"SC_FSYNC",        _SC_FSYNC},
#endif
#ifdef _SC_GETGR_R_SIZE_MAX
    {"SC_GETGR_R_SIZE_MAX",     _SC_GETGR_R_SIZE_MAX},
#endif
#ifdef _SC_GETPW_R_SIZE_MAX
    {"SC_GETPW_R_SIZE_MAX",     _SC_GETPW_R_SIZE_MAX},
#endif
#ifdef _SC_ICACHE_ASSOC
    {"SC_ICACHE_ASSOC", _SC_ICACHE_ASSOC},
#endif
#ifdef _SC_ICACHE_BLKSZ
    {"SC_ICACHE_BLKSZ", _SC_ICACHE_BLKSZ},
#endif
#ifdef _SC_ICACHE_LINESZ
    {"SC_ICACHE_LINESZ",        _SC_ICACHE_LINESZ},
#endif
#ifdef _SC_ICACHE_SZ
    {"SC_ICACHE_SZ",    _SC_ICACHE_SZ},
#endif
#ifdef _SC_INF
    {"SC_INF",  _SC_INF},
#endif
#ifdef _SC_INT_MAX
    {"SC_INT_MAX",      _SC_INT_MAX},
#endif
#ifdef _SC_INT_MIN
    {"SC_INT_MIN",      _SC_INT_MIN},
#endif
#ifdef _SC_IOV_MAX
    {"SC_IOV_MAX",      _SC_IOV_MAX},
#endif
#ifdef _SC_IP_SECOPTS
    {"SC_IP_SECOPTS",   _SC_IP_SECOPTS},
#endif
#ifdef _SC_JOB_CONTROL
    {"SC_JOB_CONTROL",  _SC_JOB_CONTROL},
#endif
#ifdef _SC_KERN_POINTERS
    {"SC_KERN_POINTERS",        _SC_KERN_POINTERS},
#endif
#ifdef _SC_KERN_SIM
    {"SC_KERN_SIM",     _SC_KERN_SIM},
#endif
#ifdef _SC_LINE_MAX
    {"SC_LINE_MAX",     _SC_LINE_MAX},
#endif
#ifdef _SC_LOGIN_NAME_MAX
    {"SC_LOGIN_NAME_MAX",       _SC_LOGIN_NAME_MAX},
#endif
#ifdef _SC_LOGNAME_MAX
    {"SC_LOGNAME_MAX",  _SC_LOGNAME_MAX},
#endif
#ifdef _SC_LONG_BIT
    {"SC_LONG_BIT",     _SC_LONG_BIT},
#endif
#ifdef _SC_MAC
    {"SC_MAC",  _SC_MAC},
#endif
#ifdef _SC_MAPPED_FILES
    {"SC_MAPPED_FILES", _SC_MAPPED_FILES},
#endif
#ifdef _SC_MAXPID
    {"SC_MAXPID",       _SC_MAXPID},
#endif
#ifdef _SC_MB_LEN_MAX
    {"SC_MB_LEN_MAX",   _SC_MB_LEN_MAX},
#endif
#ifdef _SC_MEMLOCK
    {"SC_MEMLOCK",      _SC_MEMLOCK},
#endif
#ifdef _SC_MEMLOCK_RANGE
    {"SC_MEMLOCK_RANGE",        _SC_MEMLOCK_RANGE},
#endif
#ifdef _SC_MEMORY_PROTECTION
    {"SC_MEMORY_PROTECTION",    _SC_MEMORY_PROTECTION},
#endif
#ifdef _SC_MESSAGE_PASSING
    {"SC_MESSAGE_PASSING",      _SC_MESSAGE_PASSING},
#endif
#ifdef _SC_MMAP_FIXED_ALIGNMENT
    {"SC_MMAP_FIXED_ALIGNMENT", _SC_MMAP_FIXED_ALIGNMENT},
#endif
#ifdef _SC_MQ_OPEN_MAX
    {"SC_MQ_OPEN_MAX",  _SC_MQ_OPEN_MAX},
#endif
#ifdef _SC_MQ_PRIO_MAX
    {"SC_MQ_PRIO_MAX",  _SC_MQ_PRIO_MAX},
#endif
#ifdef _SC_NACLS_MAX
    {"SC_NACLS_MAX",    _SC_NACLS_MAX},
#endif
#ifdef _SC_NGROUPS_MAX
    {"SC_NGROUPS_MAX",  _SC_NGROUPS_MAX},
#endif
#ifdef _SC_NL_ARGMAX
    {"SC_NL_ARGMAX",    _SC_NL_ARGMAX},
#endif
#ifdef _SC_NL_LANGMAX
    {"SC_NL_LANGMAX",   _SC_NL_LANGMAX},
#endif
#ifdef _SC_NL_MSGMAX
    {"SC_NL_MSGMAX",    _SC_NL_MSGMAX},
#endif
#ifdef _SC_NL_NMAX
    {"SC_NL_NMAX",      _SC_NL_NMAX},
#endif
#ifdef _SC_NL_SETMAX
    {"SC_NL_SETMAX",    _SC_NL_SETMAX},
#endif
#ifdef _SC_NL_TEXTMAX
    {"SC_NL_TEXTMAX",   _SC_NL_TEXTMAX},
#endif
#ifdef _SC_NPROCESSORS_CONF
    {"SC_NPROCESSORS_CONF",     _SC_NPROCESSORS_CONF},
#endif
#ifdef _SC_NPROCESSORS_ONLN
    {"SC_NPROCESSORS_ONLN",     _SC_NPROCESSORS_ONLN},
#endif
#ifdef _SC_NPROC_CONF
    {"SC_NPROC_CONF",   _SC_NPROC_CONF},
#endif
#ifdef _SC_NPROC_ONLN
    {"SC_NPROC_ONLN",   _SC_NPROC_ONLN},
#endif
#ifdef _SC_NZERO
    {"SC_NZERO",        _SC_NZERO},
#endif
#ifdef _SC_OPEN_MAX
    {"SC_OPEN_MAX",     _SC_OPEN_MAX},
#endif
#ifdef _SC_PAGESIZE
    {"SC_PAGESIZE",     _SC_PAGESIZE},
#endif
#ifdef _SC_PAGE_SIZE
    {"SC_PAGE_SIZE",    _SC_PAGE_SIZE},
#endif
#ifdef _SC_PASS_MAX
    {"SC_PASS_MAX",     _SC_PASS_MAX},
#endif
#ifdef _SC_PHYS_PAGES
    {"SC_PHYS_PAGES",   _SC_PHYS_PAGES},
#endif
#ifdef _SC_PII
    {"SC_PII",  _SC_PII},
#endif
#ifdef _SC_PII_INTERNET
    {"SC_PII_INTERNET", _SC_PII_INTERNET},
#endif
#ifdef _SC_PII_INTERNET_DGRAM
    {"SC_PII_INTERNET_DGRAM",   _SC_PII_INTERNET_DGRAM},
#endif
#ifdef _SC_PII_INTERNET_STREAM
    {"SC_PII_INTERNET_STREAM",  _SC_PII_INTERNET_STREAM},
#endif
#ifdef _SC_PII_OSI
    {"SC_PII_OSI",      _SC_PII_OSI},
#endif
#ifdef _SC_PII_OSI_CLTS
    {"SC_PII_OSI_CLTS", _SC_PII_OSI_CLTS},
#endif
#ifdef _SC_PII_OSI_COTS
    {"SC_PII_OSI_COTS", _SC_PII_OSI_COTS},
#endif
#ifdef _SC_PII_OSI_M
    {"SC_PII_OSI_M",    _SC_PII_OSI_M},
#endif
#ifdef _SC_PII_SOCKET
    {"SC_PII_SOCKET",   _SC_PII_SOCKET},
#endif
#ifdef _SC_PII_XTI
    {"SC_PII_XTI",      _SC_PII_XTI},
#endif
#ifdef _SC_POLL
    {"SC_POLL", _SC_POLL},
#endif
#ifdef _SC_PRIORITIZED_IO
    {"SC_PRIORITIZED_IO",       _SC_PRIORITIZED_IO},
#endif
#ifdef _SC_PRIORITY_SCHEDULING
    {"SC_PRIORITY_SCHEDULING",  _SC_PRIORITY_SCHEDULING},
#endif
#ifdef _SC_REALTIME_SIGNALS
    {"SC_REALTIME_SIGNALS",     _SC_REALTIME_SIGNALS},
#endif
#ifdef _SC_RE_DUP_MAX
    {"SC_RE_DUP_MAX",   _SC_RE_DUP_MAX},
#endif
#ifdef _SC_RTSIG_MAX
    {"SC_RTSIG_MAX",    _SC_RTSIG_MAX},
#endif
#ifdef _SC_SAVED_IDS
    {"SC_SAVED_IDS",    _SC_SAVED_IDS},
#endif
#ifdef _SC_SCHAR_MAX
    {"SC_SCHAR_MAX",    _SC_SCHAR_MAX},
#endif
#ifdef _SC_SCHAR_MIN
    {"SC_SCHAR_MIN",    _SC_SCHAR_MIN},
#endif
#ifdef _SC_SELECT
    {"SC_SELECT",       _SC_SELECT},
#endif
#ifdef _SC_SEMAPHORES
    {"SC_SEMAPHORES",   _SC_SEMAPHORES},
#endif
#ifdef _SC_SEM_NSEMS_MAX
    {"SC_SEM_NSEMS_MAX",        _SC_SEM_NSEMS_MAX},
#endif
#ifdef _SC_SEM_VALUE_MAX
    {"SC_SEM_VALUE_MAX",        _SC_SEM_VALUE_MAX},
#endif
#ifdef _SC_SHARED_MEMORY_OBJECTS
    {"SC_SHARED_MEMORY_OBJECTS",        _SC_SHARED_MEMORY_OBJECTS},
#endif
#ifdef _SC_SHRT_MAX
    {"SC_SHRT_MAX",     _SC_SHRT_MAX},
#endif
#ifdef _SC_SHRT_MIN
    {"SC_SHRT_MIN",     _SC_SHRT_MIN},
#endif
#ifdef _SC_SIGQUEUE_MAX
    {"SC_SIGQUEUE_MAX", _SC_SIGQUEUE_MAX},
#endif
#ifdef _SC_SIGRT_MAX
    {"SC_SIGRT_MAX",    _SC_SIGRT_MAX},
#endif
#ifdef _SC_SIGRT_MIN
    {"SC_SIGRT_MIN",    _SC_SIGRT_MIN},
#endif
#ifdef _SC_SOFTPOWER
    {"SC_SOFTPOWER",    _SC_SOFTPOWER},
#endif
#ifdef _SC_SPLIT_CACHE
    {"SC_SPLIT_CACHE",  _SC_SPLIT_CACHE},
#endif
#ifdef _SC_SSIZE_MAX
    {"SC_SSIZE_MAX",    _SC_SSIZE_MAX},
#endif
#ifdef _SC_STACK_PROT
    {"SC_STACK_PROT",   _SC_STACK_PROT},
#endif
#ifdef _SC_STREAM_MAX
    {"SC_STREAM_MAX",   _SC_STREAM_MAX},
#endif
#ifdef _SC_SYNCHRONIZED_IO
    {"SC_SYNCHRONIZED_IO",      _SC_SYNCHRONIZED_IO},
#endif
#ifdef _SC_THREADS
    {"SC_THREADS",      _SC_THREADS},
#endif
#ifdef _SC_THREAD_ATTR_STACKADDR
    {"SC_THREAD_ATTR_STACKADDR",        _SC_THREAD_ATTR_STACKADDR},
#endif
#ifdef _SC_THREAD_ATTR_STACKSIZE
    {"SC_THREAD_ATTR_STACKSIZE",        _SC_THREAD_ATTR_STACKSIZE},
#endif
#ifdef _SC_THREAD_DESTRUCTOR_ITERATIONS
    {"SC_THREAD_DESTRUCTOR_ITERATIONS", _SC_THREAD_DESTRUCTOR_ITERATIONS},
#endif
#ifdef _SC_THREAD_KEYS_MAX
    {"SC_THREAD_KEYS_MAX",      _SC_THREAD_KEYS_MAX},
#endif
#ifdef _SC_THREAD_PRIORITY_SCHEDULING
    {"SC_THREAD_PRIORITY_SCHEDULING",   _SC_THREAD_PRIORITY_SCHEDULING},
#endif
#ifdef _SC_THREAD_PRIO_INHERIT
    {"SC_THREAD_PRIO_INHERIT",  _SC_THREAD_PRIO_INHERIT},
#endif
#ifdef _SC_THREAD_PRIO_PROTECT
    {"SC_THREAD_PRIO_PROTECT",  _SC_THREAD_PRIO_PROTECT},
#endif
#ifdef _SC_THREAD_PROCESS_SHARED
    {"SC_THREAD_PROCESS_SHARED",        _SC_THREAD_PROCESS_SHARED},
#endif
#ifdef _SC_THREAD_SAFE_FUNCTIONS
    {"SC_THREAD_SAFE_FUNCTIONS",        _SC_THREAD_SAFE_FUNCTIONS},
#endif
#ifdef _SC_THREAD_STACK_MIN
    {"SC_THREAD_STACK_MIN",     _SC_THREAD_STACK_MIN},
#endif
#ifdef _SC_THREAD_THREADS_MAX
    {"SC_THREAD_THREADS_MAX",   _SC_THREAD_THREADS_MAX},
#endif
#ifdef _SC_TIMERS
    {"SC_TIMERS",       _SC_TIMERS},
#endif
#ifdef _SC_TIMER_MAX
    {"SC_TIMER_MAX",    _SC_TIMER_MAX},
#endif
#ifdef _SC_TTY_NAME_MAX
    {"SC_TTY_NAME_MAX", _SC_TTY_NAME_MAX},
#endif
#ifdef _SC_TZNAME_MAX
    {"SC_TZNAME_MAX",   _SC_TZNAME_MAX},
#endif
#ifdef _SC_T_IOV_MAX
    {"SC_T_IOV_MAX",    _SC_T_IOV_MAX},
#endif
#ifdef _SC_UCHAR_MAX
    {"SC_UCHAR_MAX",    _SC_UCHAR_MAX},
#endif
#ifdef _SC_UINT_MAX
    {"SC_UINT_MAX",     _SC_UINT_MAX},
#endif
#ifdef _SC_UIO_MAXIOV
    {"SC_UIO_MAXIOV",   _SC_UIO_MAXIOV},
#endif
#ifdef _SC_ULONG_MAX
    {"SC_ULONG_MAX",    _SC_ULONG_MAX},
#endif
#ifdef _SC_USHRT_MAX
    {"SC_USHRT_MAX",    _SC_USHRT_MAX},
#endif
#ifdef _SC_VERSION
    {"SC_VERSION",      _SC_VERSION},
#endif
#ifdef _SC_WORD_BIT
    {"SC_WORD_BIT",     _SC_WORD_BIT},
#endif
#ifdef _SC_XBS5_ILP32_OFF32
    {"SC_XBS5_ILP32_OFF32",     _SC_XBS5_ILP32_OFF32},
#endif
#ifdef _SC_XBS5_ILP32_OFFBIG
    {"SC_XBS5_ILP32_OFFBIG",    _SC_XBS5_ILP32_OFFBIG},
#endif
#ifdef _SC_XBS5_LP64_OFF64
    {"SC_XBS5_LP64_OFF64",      _SC_XBS5_LP64_OFF64},
#endif
#ifdef _SC_XBS5_LPBIG_OFFBIG
    {"SC_XBS5_LPBIG_OFFBIG",    _SC_XBS5_LPBIG_OFFBIG},
#endif
#ifdef _SC_XOPEN_CRYPT
    {"SC_XOPEN_CRYPT",  _SC_XOPEN_CRYPT},
#endif
#ifdef _SC_XOPEN_ENH_I18N
    {"SC_XOPEN_ENH_I18N",       _SC_XOPEN_ENH_I18N},
#endif
#ifdef _SC_XOPEN_LEGACY
    {"SC_XOPEN_LEGACY", _SC_XOPEN_LEGACY},
#endif
#ifdef _SC_XOPEN_REALTIME
    {"SC_XOPEN_REALTIME",       _SC_XOPEN_REALTIME},
#endif
#ifdef _SC_XOPEN_REALTIME_THREADS
    {"SC_XOPEN_REALTIME_THREADS",       _SC_XOPEN_REALTIME_THREADS},
#endif
#ifdef _SC_XOPEN_SHM
    {"SC_XOPEN_SHM",    _SC_XOPEN_SHM},
#endif
#ifdef _SC_XOPEN_UNIX
    {"SC_XOPEN_UNIX",   _SC_XOPEN_UNIX},
#endif
#ifdef _SC_XOPEN_VERSION
    {"SC_XOPEN_VERSION",        _SC_XOPEN_VERSION},
#endif
#ifdef _SC_XOPEN_XCU_VERSION
    {"SC_XOPEN_XCU_VERSION",    _SC_XOPEN_XCU_VERSION},
#endif
#ifdef _SC_XOPEN_XPG2
    {"SC_XOPEN_XPG2",   _SC_XOPEN_XPG2},
#endif
#ifdef _SC_XOPEN_XPG3
    {"SC_XOPEN_XPG3",   _SC_XOPEN_XPG3},
#endif
#ifdef _SC_XOPEN_XPG4
    {"SC_XOPEN_XPG4",   _SC_XOPEN_XPG4},
#endif
};

static int
conv_sysconf_confname(PyObject *arg, int *valuep)
{
    return conv_confname(arg, valuep, posix_constants_sysconf,
                         sizeof(posix_constants_sysconf)
                           / sizeof(struct constdef));
}

PyDoc_STRVAR(posix_sysconf__doc__,
"sysconf(name) -> integer\n\n\
Return an integer-valued system configuration variable.");

static PyObject *
posix_sysconf(PyObject *self, PyObject *args)
{
    PyObject *result = NULL;
    int name;

    if (PyArg_ParseTuple(args, "O&:sysconf", conv_sysconf_confname, &name)) {
        int value;

        errno = 0;
        value = sysconf(name);
        if (value == -1 && errno != 0)
            posix_error();
        else
            result = PyInt_FromLong(value);
    }
    return result;
}
#endif


#if defined(HAVE_FPATHCONF) || defined(HAVE_PATHCONF) || defined(HAVE_CONFSTR) || defined(HAVE_SYSCONF)
/* This code is used to ensure that the tables of configuration value names
 * are in sorted order as required by conv_confname(), and also to build the
 * the exported dictionaries that are used to publish information about the
 * names available on the host platform.
 *
 * Sorting the table at runtime ensures that the table is properly ordered
 * when used, even for platforms we're not able to test on.  It also makes
 * it easier to add additional entries to the tables.
 */

static int
cmp_constdefs(const void *v1,  const void *v2)
{
    const struct constdef *c1 =
    (const struct constdef *) v1;
    const struct constdef *c2 =
    (const struct constdef *) v2;

    return strcmp(c1->name, c2->name);
}

static int
setup_confname_table(struct constdef *table, size_t tablesize,
                     char *tablename, PyObject *module)
{
    PyObject *d = NULL;
    size_t i;

    qsort(table, tablesize, sizeof(struct constdef), cmp_constdefs);
    d = PyDict_New();
    if (d == NULL)
        return -1;

    for (i=0; i < tablesize; ++i) {
        PyObject *o = PyInt_FromLong(table[i].value);
        if (o == NULL || PyDict_SetItemString(d, table[i].name, o) == -1) {
            Py_XDECREF(o);
            Py_DECREF(d);
            return -1;
        }
        Py_DECREF(o);
    }
    return PyModule_AddObject(module, tablename, d);
}
#endif  /* HAVE_FPATHCONF || HAVE_PATHCONF || HAVE_CONFSTR || HAVE_SYSCONF */

/* Return -1 on failure, 0 on success. */
static int
setup_confname_tables(PyObject *module)
{
#if defined(HAVE_FPATHCONF) || defined(HAVE_PATHCONF)
    if (setup_confname_table(posix_constants_pathconf,
                             sizeof(posix_constants_pathconf)
                               / sizeof(struct constdef),
                             "pathconf_names", module))
        return -1;
#endif
#ifdef HAVE_CONFSTR
    if (setup_confname_table(posix_constants_confstr,
                             sizeof(posix_constants_confstr)
                               / sizeof(struct constdef),
                             "confstr_names", module))
        return -1;
#endif
#ifdef HAVE_SYSCONF
    if (setup_confname_table(posix_constants_sysconf,
                             sizeof(posix_constants_sysconf)
                               / sizeof(struct constdef),
                             "sysconf_names", module))
        return -1;
#endif
    return 0;
}


PyDoc_STRVAR(posix_abort__doc__,
"abort() -> does not return!\n\n\
Abort the interpreter immediately.  This 'dumps core' or otherwise fails\n\
in the hardest way possible on the hosting operating system.");

static PyObject *
posix_abort(PyObject *self, PyObject *noargs)
{
    abort();
    /*NOTREACHED*/
    Py_FatalError("abort() called from Python code didn't abort!");
    return NULL;
}

#ifdef HAVE_SETRESUID
PyDoc_STRVAR(posix_setresuid__doc__,
"setresuid(ruid, euid, suid)\n\n\
Set the current process's real, effective, and saved user ids.");

static PyObject*
posix_setresuid (PyObject *self, PyObject *args)
{
    /* We assume uid_t is no larger than a long. */
    long ruid, euid, suid;
    if (!PyArg_ParseTuple(args, "lll", &ruid, &euid, &suid))
        return NULL;
    if (setresuid(ruid, euid, suid) < 0)
        return posix_error();
    Py_RETURN_NONE;
}
#endif

#ifdef HAVE_SETRESGID
PyDoc_STRVAR(posix_setresgid__doc__,
"setresgid(rgid, egid, sgid)\n\n\
Set the current process's real, effective, and saved group ids.");

static PyObject*
posix_setresgid (PyObject *self, PyObject *args)
{
    /* We assume uid_t is no larger than a long. */
    long rgid, egid, sgid;
    if (!PyArg_ParseTuple(args, "lll", &rgid, &egid, &sgid))
        return NULL;
    if (setresgid(rgid, egid, sgid) < 0)
        return posix_error();
    Py_RETURN_NONE;
}
#endif

#ifdef HAVE_GETRESUID
PyDoc_STRVAR(posix_getresuid__doc__,
"getresuid() -> (ruid, euid, suid)\n\n\
Get tuple of the current process's real, effective, and saved user ids.");

static PyObject*
posix_getresuid (PyObject *self, PyObject *noargs)
{
    uid_t ruid, euid, suid;
    long l_ruid, l_euid, l_suid;
    if (getresuid(&ruid, &euid, &suid) < 0)
        return posix_error();
    /* Force the values into long's as we don't know the size of uid_t. */
    l_ruid = ruid;
    l_euid = euid;
    l_suid = suid;
    return Py_BuildValue("(lll)", l_ruid, l_euid, l_suid);
}
#endif

#ifdef HAVE_GETRESGID
PyDoc_STRVAR(posix_getresgid__doc__,
"getresgid() -> (rgid, egid, sgid)\n\n\
Get tuple of the current process's real, effective, and saved group ids.");

static PyObject*
posix_getresgid (PyObject *self, PyObject *noargs)
{
    uid_t rgid, egid, sgid;
    long l_rgid, l_egid, l_sgid;
    if (getresgid(&rgid, &egid, &sgid) < 0)
        return posix_error();
    /* Force the values into long's as we don't know the size of uid_t. */
    l_rgid = rgid;
    l_egid = egid;
    l_sgid = sgid;
    return Py_BuildValue("(lll)", l_rgid, l_egid, l_sgid);
}
#endif

static PyMethodDef posix_methods[] = {
    {"access",          posix_access,     METH_VARARGS, posix_access__doc__},
#ifdef HAVE_TTYNAME
    {"ttyname",         posix_ttyname, METH_VARARGS, posix_ttyname__doc__},
#endif
    {"chdir",           posix_chdir,      METH_VARARGS, posix_chdir__doc__},
#ifdef HAVE_CHFLAGS
    {"chflags",         posix_chflags, METH_VARARGS, posix_chflags__doc__},
#endif /* HAVE_CHFLAGS */
    {"chmod",           posix_chmod,      METH_VARARGS, posix_chmod__doc__},
#ifdef HAVE_FCHMOD
    {"fchmod",          posix_fchmod, METH_VARARGS, posix_fchmod__doc__},
#endif /* HAVE_FCHMOD */
#ifdef HAVE_CHOWN
    {"chown",           posix_chown, METH_VARARGS, posix_chown__doc__},
#endif /* HAVE_CHOWN */
#ifdef HAVE_LCHMOD
    {"lchmod",          posix_lchmod, METH_VARARGS, posix_lchmod__doc__},
#endif /* HAVE_LCHMOD */
#ifdef HAVE_FCHOWN
    {"fchown",          posix_fchown, METH_VARARGS, posix_fchown__doc__},
#endif /* HAVE_FCHOWN */
#ifdef HAVE_LCHFLAGS
    {"lchflags",        posix_lchflags, METH_VARARGS, posix_lchflags__doc__},
#endif /* HAVE_LCHFLAGS */
#ifdef HAVE_LCHOWN
    {"lchown",          posix_lchown, METH_VARARGS, posix_lchown__doc__},
#endif /* HAVE_LCHOWN */
#ifdef HAVE_CHROOT
    {"chroot",          posix_chroot, METH_VARARGS, posix_chroot__doc__},
#endif
#ifdef HAVE_CTERMID
    {"ctermid",         posix_ctermid, METH_NOARGS, posix_ctermid__doc__},
#endif
#ifdef HAVE_GETCWD
    {"getcwd",          posix_getcwd,     METH_NOARGS,  posix_getcwd__doc__},
#ifdef Py_USING_UNICODE
    {"getcwdu",         posix_getcwdu,    METH_NOARGS,  posix_getcwdu__doc__},
#endif
#endif
#ifdef HAVE_LINK
    {"link",            posix_link, METH_VARARGS, posix_link__doc__},
#endif /* HAVE_LINK */
    {"listdir",         posix_listdir,    METH_VARARGS, posix_listdir__doc__},
    {"lstat",           posix_lstat,      METH_VARARGS, posix_lstat__doc__},
    {"mkdir",           posix_mkdir,      METH_VARARGS, posix_mkdir__doc__},
#ifdef HAVE_NICE
    {"nice",            posix_nice, METH_VARARGS, posix_nice__doc__},
#endif /* HAVE_NICE */
#ifdef HAVE_READLINK
    {"readlink",        posix_readlink, METH_VARARGS, posix_readlink__doc__},
#endif /* HAVE_READLINK */
    {"rename",          posix_rename,     METH_VARARGS, posix_rename__doc__},
    {"rmdir",           posix_rmdir,      METH_VARARGS, posix_rmdir__doc__},
    {"stat",            posix_stat,       METH_VARARGS, posix_stat__doc__},
    //{"stat_float_times", stat_float_times, METH_VARARGS, stat_float_times__doc__},
#ifdef HAVE_SYMLINK
    {"symlink",         posix_symlink, METH_VARARGS, posix_symlink__doc__},
#endif /* HAVE_SYMLINK */
#ifdef HAVE_SYSTEM
    {"system",          posix_system, METH_VARARGS, posix_system__doc__},
#endif
    {"umask",           posix_umask,      METH_VARARGS, posix_umask__doc__},
#ifdef HAVE_UNAME
    {"uname",           posix_uname, METH_NOARGS, posix_uname__doc__},
#endif /* HAVE_UNAME */
    {"unlink",          posix_unlink,     METH_VARARGS, posix_unlink__doc__},
    {"remove",          posix_unlink,     METH_VARARGS, posix_remove__doc__},
    {"utime",           posix_utime,      METH_VARARGS, posix_utime__doc__},
#ifdef HAVE_TIMES
    {"times",           posix_times, METH_NOARGS, posix_times__doc__},
#endif /* HAVE_TIMES */
    {"_exit",           posix__exit,      METH_VARARGS, posix__exit__doc__},
#ifdef HAVE_EXECV
    {"execv",           posix_execv, METH_VARARGS, posix_execv__doc__},
    {"execve",          posix_execve, METH_VARARGS, posix_execve__doc__},
#endif /* HAVE_EXECV */
#ifdef HAVE_SPAWNV
    {"spawnv",          posix_spawnv, METH_VARARGS, posix_spawnv__doc__},
    {"spawnve",         posix_spawnve, METH_VARARGS, posix_spawnve__doc__},
#if defined(PYOS_OS2)
    {"spawnvp",         posix_spawnvp, METH_VARARGS, posix_spawnvp__doc__},
    {"spawnvpe",        posix_spawnvpe, METH_VARARGS, posix_spawnvpe__doc__},
#endif /* PYOS_OS2 */
#endif /* HAVE_SPAWNV */
#ifdef HAVE_FORK1
    {"fork1",       posix_fork1, METH_NOARGS, posix_fork1__doc__},
#endif /* HAVE_FORK1 */
#ifdef HAVE_FORK
    {"fork",            posix_fork, METH_NOARGS, posix_fork__doc__},
#endif /* HAVE_FORK */
#if defined(HAVE_OPENPTY) || defined(HAVE__GETPTY) || defined(HAVE_DEV_PTMX)
    {"openpty",         posix_openpty, METH_NOARGS, posix_openpty__doc__},
#endif /* HAVE_OPENPTY || HAVE__GETPTY || HAVE_DEV_PTMX */
#ifdef HAVE_FORKPTY
    {"forkpty",         posix_forkpty, METH_NOARGS, posix_forkpty__doc__},
#endif /* HAVE_FORKPTY */
#ifdef HAVE_GETEGID
    {"getegid",         posix_getegid, METH_NOARGS, posix_getegid__doc__},
#endif /* HAVE_GETEGID */
#ifdef HAVE_GETEUID
    {"geteuid",         posix_geteuid, METH_NOARGS, posix_geteuid__doc__},
#endif /* HAVE_GETEUID */
#ifdef HAVE_GETGID
    {"getgid",          posix_getgid, METH_NOARGS, posix_getgid__doc__},
#endif /* HAVE_GETGID */
#ifdef HAVE_GETGROUPS
    {"getgroups",       posix_getgroups, METH_NOARGS, posix_getgroups__doc__},
#endif
    {"getpid",          posix_getpid,     METH_NOARGS,  posix_getpid__doc__},
#ifdef HAVE_GETPGRP
    {"getpgrp",         posix_getpgrp, METH_NOARGS, posix_getpgrp__doc__},
#endif /* HAVE_GETPGRP */
#ifdef HAVE_GETPPID
    {"getppid",         posix_getppid, METH_NOARGS, posix_getppid__doc__},
#endif /* HAVE_GETPPID */
#ifdef HAVE_GETUID
    {"getuid",          posix_getuid, METH_NOARGS, posix_getuid__doc__},
#endif /* HAVE_GETUID */
#ifdef HAVE_GETLOGIN
    {"getlogin",        posix_getlogin, METH_NOARGS, posix_getlogin__doc__},
#endif
#ifdef HAVE_KILL
    {"kill",            posix_kill, METH_VARARGS, posix_kill__doc__},
#endif /* HAVE_KILL */
#ifdef HAVE_KILLPG
    {"killpg",          posix_killpg, METH_VARARGS, posix_killpg__doc__},
#endif /* HAVE_KILLPG */
#ifdef HAVE_PLOCK
    {"plock",           posix_plock, METH_VARARGS, posix_plock__doc__},
#endif /* HAVE_PLOCK */
#ifdef HAVE_POPEN
    {"popen",           posix_popen, METH_VARARGS, posix_popen__doc__},
#ifdef MS_WINDOWS
    {"popen2",          win32_popen2, METH_VARARGS},
    {"popen3",          win32_popen3, METH_VARARGS},
    {"popen4",          win32_popen4, METH_VARARGS},
    {"startfile",       win32_startfile, METH_VARARGS, win32_startfile__doc__},
    {"kill",    win32_kill, METH_VARARGS, win32_kill__doc__},
#else
#if defined(PYOS_OS2) && defined(PYCC_GCC)
    {"popen2",          os2emx_popen2, METH_VARARGS},
    {"popen3",          os2emx_popen3, METH_VARARGS},
    {"popen4",          os2emx_popen4, METH_VARARGS},
#endif
#endif
#endif /* HAVE_POPEN */
#ifdef HAVE_SETUID
    {"setuid",          posix_setuid, METH_VARARGS, posix_setuid__doc__},
#endif /* HAVE_SETUID */
#ifdef HAVE_SETEUID
    {"seteuid",         posix_seteuid, METH_VARARGS, posix_seteuid__doc__},
#endif /* HAVE_SETEUID */
#ifdef HAVE_SETEGID
    {"setegid",         posix_setegid, METH_VARARGS, posix_setegid__doc__},
#endif /* HAVE_SETEGID */
#ifdef HAVE_SETREUID
    {"setreuid",        posix_setreuid, METH_VARARGS, posix_setreuid__doc__},
#endif /* HAVE_SETREUID */
#ifdef HAVE_SETREGID
    {"setregid",        posix_setregid, METH_VARARGS, posix_setregid__doc__},
#endif /* HAVE_SETREGID */
#ifdef HAVE_SETGID
    {"setgid",          posix_setgid, METH_VARARGS, posix_setgid__doc__},
#endif /* HAVE_SETGID */
#ifdef HAVE_SETGROUPS
    {"setgroups",       posix_setgroups, METH_O, posix_setgroups__doc__},
#endif /* HAVE_SETGROUPS */
#ifdef HAVE_INITGROUPS
    {"initgroups",      posix_initgroups, METH_VARARGS, posix_initgroups__doc__},
#endif /* HAVE_INITGROUPS */
#ifdef HAVE_GETPGID
    {"getpgid",         posix_getpgid, METH_VARARGS, posix_getpgid__doc__},
#endif /* HAVE_GETPGID */
#ifdef HAVE_SETPGRP
    {"setpgrp",         posix_setpgrp, METH_NOARGS, posix_setpgrp__doc__},
#endif /* HAVE_SETPGRP */
#ifdef HAVE_WAIT
    {"wait",            posix_wait, METH_NOARGS, posix_wait__doc__},
#endif /* HAVE_WAIT */
#ifdef HAVE_WAIT3
    {"wait3",           posix_wait3, METH_VARARGS, posix_wait3__doc__},
#endif /* HAVE_WAIT3 */
#ifdef HAVE_WAIT4
    {"wait4",           posix_wait4, METH_VARARGS, posix_wait4__doc__},
#endif /* HAVE_WAIT4 */
#if defined(HAVE_WAITPID) || defined(HAVE_CWAIT)
    {"waitpid",         posix_waitpid, METH_VARARGS, posix_waitpid__doc__},
#endif /* HAVE_WAITPID */
#ifdef HAVE_GETSID
    {"getsid",          posix_getsid, METH_VARARGS, posix_getsid__doc__},
#endif /* HAVE_GETSID */
#ifdef HAVE_SETSID
    {"setsid",          posix_setsid, METH_NOARGS, posix_setsid__doc__},
#endif /* HAVE_SETSID */
#ifdef HAVE_SETPGID
    {"setpgid",         posix_setpgid, METH_VARARGS, posix_setpgid__doc__},
#endif /* HAVE_SETPGID */
#ifdef HAVE_TCGETPGRP
    {"tcgetpgrp",       posix_tcgetpgrp, METH_VARARGS, posix_tcgetpgrp__doc__},
#endif /* HAVE_TCGETPGRP */
#ifdef HAVE_TCSETPGRP
    {"tcsetpgrp",       posix_tcsetpgrp, METH_VARARGS, posix_tcsetpgrp__doc__},
#endif /* HAVE_TCSETPGRP */
    {"open",            posix_open,       METH_VARARGS, posix_open__doc__},
    {"close",           posix_close,      METH_VARARGS, posix_close__doc__},
    {"closerange",      posix_closerange, METH_VARARGS, posix_closerange__doc__},
    {"dup",             posix_dup,        METH_VARARGS, posix_dup__doc__},
    {"dup2",            posix_dup2,       METH_VARARGS, posix_dup2__doc__},
    {"lseek",           posix_lseek,      METH_VARARGS, posix_lseek__doc__},
    {"read",            posix_read,       METH_VARARGS, posix_read__doc__},
    {"write",           posix_write,      METH_VARARGS, posix_write__doc__},
    {"fstat",           posix_fstat,      METH_VARARGS, posix_fstat__doc__},
    {"fdopen",          posix_fdopen,     METH_VARARGS, posix_fdopen__doc__},
    {"isatty",          posix_isatty,     METH_VARARGS, posix_isatty__doc__},
#ifdef HAVE_PIPE
    {"pipe",            posix_pipe, METH_NOARGS, posix_pipe__doc__},
#endif
#ifdef HAVE_MKFIFO
    {"mkfifo",          posix_mkfifo, METH_VARARGS, posix_mkfifo__doc__},
#endif
#if defined(HAVE_MKNOD) && defined(HAVE_MAKEDEV)
    {"mknod",           posix_mknod, METH_VARARGS, posix_mknod__doc__},
#endif
#ifdef HAVE_DEVICE_MACROS
    {"major",           posix_major, METH_VARARGS, posix_major__doc__},
    {"minor",           posix_minor, METH_VARARGS, posix_minor__doc__},
    {"makedev",         posix_makedev, METH_VARARGS, posix_makedev__doc__},
#endif
#ifdef HAVE_FTRUNCATE
    {"ftruncate",       posix_ftruncate, METH_VARARGS, posix_ftruncate__doc__},
#endif
#ifdef HAVE_PUTENV
    {"putenv",          posix_putenv, METH_VARARGS, posix_putenv__doc__},
#endif
#ifdef HAVE_UNSETENV
    {"unsetenv",        posix_unsetenv, METH_VARARGS, posix_unsetenv__doc__},
#endif
    {"strerror",        posix_strerror,   METH_VARARGS, posix_strerror__doc__},
#ifdef HAVE_FCHDIR
    {"fchdir",          posix_fchdir, METH_O, posix_fchdir__doc__},
#endif
#ifdef HAVE_FSYNC
    {"fsync",       posix_fsync, METH_O, posix_fsync__doc__},
#endif
#ifdef HAVE_FDATASYNC
    {"fdatasync",   posix_fdatasync,  METH_O, posix_fdatasync__doc__},
#endif
#ifdef HAVE_SYS_WAIT_H
#ifdef WCOREDUMP
    {"WCOREDUMP",       posix_WCOREDUMP, METH_VARARGS, posix_WCOREDUMP__doc__},
#endif /* WCOREDUMP */
#ifdef WIFCONTINUED
    {"WIFCONTINUED",posix_WIFCONTINUED, METH_VARARGS, posix_WIFCONTINUED__doc__},
#endif /* WIFCONTINUED */
#ifdef WIFSTOPPED
    {"WIFSTOPPED",      posix_WIFSTOPPED, METH_VARARGS, posix_WIFSTOPPED__doc__},
#endif /* WIFSTOPPED */
#ifdef WIFSIGNALED
    {"WIFSIGNALED",     posix_WIFSIGNALED, METH_VARARGS, posix_WIFSIGNALED__doc__},
#endif /* WIFSIGNALED */
#ifdef WIFEXITED
    {"WIFEXITED",       posix_WIFEXITED, METH_VARARGS, posix_WIFEXITED__doc__},
#endif /* WIFEXITED */
#ifdef WEXITSTATUS
    {"WEXITSTATUS",     posix_WEXITSTATUS, METH_VARARGS, posix_WEXITSTATUS__doc__},
#endif /* WEXITSTATUS */
#ifdef WTERMSIG
    {"WTERMSIG",        posix_WTERMSIG, METH_VARARGS, posix_WTERMSIG__doc__},
#endif /* WTERMSIG */
#ifdef WSTOPSIG
    {"WSTOPSIG",        posix_WSTOPSIG, METH_VARARGS, posix_WSTOPSIG__doc__},
#endif /* WSTOPSIG */
#endif /* HAVE_SYS_WAIT_H */
#if defined(HAVE_FSTATVFS) && defined(HAVE_SYS_STATVFS_H)
    {"fstatvfs",        posix_fstatvfs, METH_VARARGS, posix_fstatvfs__doc__},
#endif
#if defined(HAVE_STATVFS) && defined(HAVE_SYS_STATVFS_H)
    {"statvfs",         posix_statvfs, METH_VARARGS, posix_statvfs__doc__},
#endif
#ifdef HAVE_TMPFILE
    {"tmpfile",         posix_tmpfile,    METH_NOARGS,  posix_tmpfile__doc__},
#endif
#ifdef HAVE_TEMPNAM
    {"tempnam",         posix_tempnam,    METH_VARARGS, posix_tempnam__doc__},
#endif
#ifdef HAVE_TMPNAM
    {"tmpnam",          posix_tmpnam,     METH_NOARGS,  posix_tmpnam__doc__},
#endif
#ifdef HAVE_CONFSTR
    {"confstr",         posix_confstr, METH_VARARGS, posix_confstr__doc__},
#endif
#ifdef HAVE_SYSCONF
    {"sysconf",         posix_sysconf, METH_VARARGS, posix_sysconf__doc__},
#endif
#ifdef HAVE_FPATHCONF
    {"fpathconf",       posix_fpathconf, METH_VARARGS, posix_fpathconf__doc__},
#endif
#ifdef HAVE_PATHCONF
    {"pathconf",        posix_pathconf, METH_VARARGS, posix_pathconf__doc__},
#endif
    {"abort",           posix_abort,      METH_NOARGS,  posix_abort__doc__},
#ifdef HAVE_SETRESUID
    {"setresuid",       posix_setresuid, METH_VARARGS, posix_setresuid__doc__},
#endif
#ifdef HAVE_SETRESGID
    {"setresgid",       posix_setresgid, METH_VARARGS, posix_setresgid__doc__},
#endif
#ifdef HAVE_GETRESUID
    {"getresuid",       posix_getresuid, METH_NOARGS, posix_getresuid__doc__},
#endif
#ifdef HAVE_GETRESGID
    {"getresgid",       posix_getresgid, METH_NOARGS, posix_getresgid__doc__},
#endif

    {NULL,              NULL}            /* Sentinel */
};


static int
ins(PyObject *module, char *symbol, long value)
{
    return PyModule_AddIntConstant(module, symbol, value);
}

static int
all_ins(PyObject *d)
{
#ifdef F_OK
    if (ins(d, "F_OK", (long)F_OK)) return -1;
#endif
#ifdef R_OK
    if (ins(d, "R_OK", (long)R_OK)) return -1;
#endif
#ifdef W_OK
    if (ins(d, "W_OK", (long)W_OK)) return -1;
#endif
#ifdef X_OK
    if (ins(d, "X_OK", (long)X_OK)) return -1;
#endif
#ifdef NGROUPS_MAX
    if (ins(d, "NGROUPS_MAX", (long)NGROUPS_MAX)) return -1;
#endif
#ifdef TMP_MAX
    if (ins(d, "TMP_MAX", (long)TMP_MAX)) return -1;
#endif
#ifdef WCONTINUED
    if (ins(d, "WCONTINUED", (long)WCONTINUED)) return -1;
#endif
#ifdef WNOHANG
    if (ins(d, "WNOHANG", (long)WNOHANG)) return -1;
#endif
#ifdef WUNTRACED
    if (ins(d, "WUNTRACED", (long)WUNTRACED)) return -1;
#endif
#ifdef O_RDONLY
    if (ins(d, "O_RDONLY", (long)O_RDONLY)) return -1;
#endif
#ifdef O_WRONLY
    if (ins(d, "O_WRONLY", (long)O_WRONLY)) return -1;
#endif
#ifdef O_RDWR
    if (ins(d, "O_RDWR", (long)O_RDWR)) return -1;
#endif
#ifdef O_NDELAY
    if (ins(d, "O_NDELAY", (long)O_NDELAY)) return -1;
#endif
#ifdef O_NONBLOCK
    if (ins(d, "O_NONBLOCK", (long)O_NONBLOCK)) return -1;
#endif
#ifdef O_APPEND
    if (ins(d, "O_APPEND", (long)O_APPEND)) return -1;
#endif
#ifdef O_DSYNC
    if (ins(d, "O_DSYNC", (long)O_DSYNC)) return -1;
#endif
#ifdef O_RSYNC
    if (ins(d, "O_RSYNC", (long)O_RSYNC)) return -1;
#endif
#ifdef O_SYNC
    if (ins(d, "O_SYNC", (long)O_SYNC)) return -1;
#endif
#ifdef O_NOCTTY
    if (ins(d, "O_NOCTTY", (long)O_NOCTTY)) return -1;
#endif
#ifdef O_CREAT
    if (ins(d, "O_CREAT", (long)O_CREAT)) return -1;
#endif
#ifdef O_EXCL
    if (ins(d, "O_EXCL", (long)O_EXCL)) return -1;
#endif
#ifdef O_TRUNC
    if (ins(d, "O_TRUNC", (long)O_TRUNC)) return -1;
#endif
#ifdef O_BINARY
    if (ins(d, "O_BINARY", (long)O_BINARY)) return -1;
#endif
#ifdef O_TEXT
    if (ins(d, "O_TEXT", (long)O_TEXT)) return -1;
#endif
#ifdef O_LARGEFILE
    if (ins(d, "O_LARGEFILE", (long)O_LARGEFILE)) return -1;
#endif
#ifdef O_SHLOCK
    if (ins(d, "O_SHLOCK", (long)O_SHLOCK)) return -1;
#endif
#ifdef O_EXLOCK
    if (ins(d, "O_EXLOCK", (long)O_EXLOCK)) return -1;
#endif

/* MS Windows */
#ifdef O_NOINHERIT
    /* Don't inherit in child processes. */
    if (ins(d, "O_NOINHERIT", (long)O_NOINHERIT)) return -1;
#endif
#ifdef _O_SHORT_LIVED
    /* Optimize for short life (keep in memory). */
    /* MS forgot to define this one with a non-underscore form too. */
    if (ins(d, "O_SHORT_LIVED", (long)_O_SHORT_LIVED)) return -1;
#endif
#ifdef O_TEMPORARY
    /* Automatically delete when last handle is closed. */
    if (ins(d, "O_TEMPORARY", (long)O_TEMPORARY)) return -1;
#endif
#ifdef O_RANDOM
    /* Optimize for random access. */
    if (ins(d, "O_RANDOM", (long)O_RANDOM)) return -1;
#endif
#ifdef O_SEQUENTIAL
    /* Optimize for sequential access. */
    if (ins(d, "O_SEQUENTIAL", (long)O_SEQUENTIAL)) return -1;
#endif

/* GNU extensions. */
#ifdef O_ASYNC
    /* Send a SIGIO signal whenever input or output
       becomes available on file descriptor */
    if (ins(d, "O_ASYNC", (long)O_ASYNC)) return -1;
#endif
#ifdef O_DIRECT
    /* Direct disk access. */
    if (ins(d, "O_DIRECT", (long)O_DIRECT)) return -1;
#endif
#ifdef O_DIRECTORY
    /* Must be a directory.      */
    if (ins(d, "O_DIRECTORY", (long)O_DIRECTORY)) return -1;
#endif
#ifdef O_NOFOLLOW
    /* Do not follow links.      */
    if (ins(d, "O_NOFOLLOW", (long)O_NOFOLLOW)) return -1;
#endif
#ifdef O_NOATIME
    /* Do not update the access time. */
    if (ins(d, "O_NOATIME", (long)O_NOATIME)) return -1;
#endif

    /* These come from sysexits.h */
#ifdef EX_OK
    if (ins(d, "EX_OK", (long)EX_OK)) return -1;
#endif /* EX_OK */
#ifdef EX_USAGE
    if (ins(d, "EX_USAGE", (long)EX_USAGE)) return -1;
#endif /* EX_USAGE */
#ifdef EX_DATAERR
    if (ins(d, "EX_DATAERR", (long)EX_DATAERR)) return -1;
#endif /* EX_DATAERR */
#ifdef EX_NOINPUT
    if (ins(d, "EX_NOINPUT", (long)EX_NOINPUT)) return -1;
#endif /* EX_NOINPUT */
#ifdef EX_NOUSER
    if (ins(d, "EX_NOUSER", (long)EX_NOUSER)) return -1;
#endif /* EX_NOUSER */
#ifdef EX_NOHOST
    if (ins(d, "EX_NOHOST", (long)EX_NOHOST)) return -1;
#endif /* EX_NOHOST */
#ifdef EX_UNAVAILABLE
    if (ins(d, "EX_UNAVAILABLE", (long)EX_UNAVAILABLE)) return -1;
#endif /* EX_UNAVAILABLE */
#ifdef EX_SOFTWARE
    if (ins(d, "EX_SOFTWARE", (long)EX_SOFTWARE)) return -1;
#endif /* EX_SOFTWARE */
#ifdef EX_OSERR
    if (ins(d, "EX_OSERR", (long)EX_OSERR)) return -1;
#endif /* EX_OSERR */
#ifdef EX_OSFILE
    if (ins(d, "EX_OSFILE", (long)EX_OSFILE)) return -1;
#endif /* EX_OSFILE */
#ifdef EX_CANTCREAT
    if (ins(d, "EX_CANTCREAT", (long)EX_CANTCREAT)) return -1;
#endif /* EX_CANTCREAT */
#ifdef EX_IOERR
    if (ins(d, "EX_IOERR", (long)EX_IOERR)) return -1;
#endif /* EX_IOERR */
#ifdef EX_TEMPFAIL
    if (ins(d, "EX_TEMPFAIL", (long)EX_TEMPFAIL)) return -1;
#endif /* EX_TEMPFAIL */
#ifdef EX_PROTOCOL
    if (ins(d, "EX_PROTOCOL", (long)EX_PROTOCOL)) return -1;
#endif /* EX_PROTOCOL */
#ifdef EX_NOPERM
    if (ins(d, "EX_NOPERM", (long)EX_NOPERM)) return -1;
#endif /* EX_NOPERM */
#ifdef EX_CONFIG
    if (ins(d, "EX_CONFIG", (long)EX_CONFIG)) return -1;
#endif /* EX_CONFIG */
#ifdef EX_NOTFOUND
    if (ins(d, "EX_NOTFOUND", (long)EX_NOTFOUND)) return -1;
#endif /* EX_NOTFOUND */

#ifdef HAVE_SPAWNV
#if defined(PYOS_OS2) && defined(PYCC_GCC)
    if (ins(d, "P_WAIT", (long)P_WAIT)) return -1;
    if (ins(d, "P_NOWAIT", (long)P_NOWAIT)) return -1;
    if (ins(d, "P_OVERLAY", (long)P_OVERLAY)) return -1;
    if (ins(d, "P_DEBUG", (long)P_DEBUG)) return -1;
    if (ins(d, "P_SESSION", (long)P_SESSION)) return -1;
    if (ins(d, "P_DETACH", (long)P_DETACH)) return -1;
    if (ins(d, "P_PM", (long)P_PM)) return -1;
    if (ins(d, "P_DEFAULT", (long)P_DEFAULT)) return -1;
    if (ins(d, "P_MINIMIZE", (long)P_MINIMIZE)) return -1;
    if (ins(d, "P_MAXIMIZE", (long)P_MAXIMIZE)) return -1;
    if (ins(d, "P_FULLSCREEN", (long)P_FULLSCREEN)) return -1;
    if (ins(d, "P_WINDOWED", (long)P_WINDOWED)) return -1;
    if (ins(d, "P_FOREGROUND", (long)P_FOREGROUND)) return -1;
    if (ins(d, "P_BACKGROUND", (long)P_BACKGROUND)) return -1;
    if (ins(d, "P_NOCLOSE", (long)P_NOCLOSE)) return -1;
    if (ins(d, "P_NOSESSION", (long)P_NOSESSION)) return -1;
    if (ins(d, "P_QUOTE", (long)P_QUOTE)) return -1;
    if (ins(d, "P_TILDE", (long)P_TILDE)) return -1;
    if (ins(d, "P_UNRELATED", (long)P_UNRELATED)) return -1;
    if (ins(d, "P_DEBUGDESC", (long)P_DEBUGDESC)) return -1;
#else
    if (ins(d, "P_WAIT", (long)_P_WAIT)) return -1;
    if (ins(d, "P_NOWAIT", (long)_P_NOWAIT)) return -1;
    if (ins(d, "P_OVERLAY", (long)_OLD_P_OVERLAY)) return -1;
    if (ins(d, "P_NOWAITO", (long)_P_NOWAITO)) return -1;
    if (ins(d, "P_DETACH", (long)_P_DETACH)) return -1;
#endif
#endif
  return 0;
}

#define INITFUNC initedk2
#define MODNAME "edk2"

PyMODINIT_FUNC
INITFUNC(void)
{
    PyObject *m;

#ifndef UEFI_C_SOURCE
  PyObject *v;
#endif

    m = Py_InitModule3(MODNAME,
                       posix_methods,
                       edk2__doc__);
    if (m == NULL)
        return;

#ifndef UEFI_C_SOURCE
    /* Initialize environ dictionary */
    v = convertenviron();
    Py_XINCREF(v);
    if (v == NULL || PyModule_AddObject(m, "environ", v) != 0)
        return;
    Py_DECREF(v);
#endif  /* UEFI_C_SOURCE */

    if (all_ins(m))
        return;

    if (setup_confname_tables(m))
        return;

    Py_INCREF(PyExc_OSError);
    PyModule_AddObject(m, "error", PyExc_OSError);

#ifdef HAVE_PUTENV
    if (posix_putenv_garbage == NULL)
        posix_putenv_garbage = PyDict_New();
#endif

    if (!initialized) {
        stat_result_desc.name = MODNAME ".stat_result";
        stat_result_desc.fields[2].name = PyStructSequence_UnnamedField;
        stat_result_desc.fields[3].name = PyStructSequence_UnnamedField;
        stat_result_desc.fields[4].name = PyStructSequence_UnnamedField;
        PyStructSequence_InitType(&StatResultType, &stat_result_desc);
        structseq_new = StatResultType.tp_new;
        StatResultType.tp_new = statresult_new;

        //statvfs_result_desc.name = MODNAME ".statvfs_result";
        //PyStructSequence_InitType(&StatVFSResultType, &statvfs_result_desc);
#ifdef NEED_TICKS_PER_SECOND
#  if defined(HAVE_SYSCONF) && defined(_SC_CLK_TCK)
        ticks_per_second = sysconf(_SC_CLK_TCK);
#  elif defined(HZ)
        ticks_per_second = HZ;
#  else
        ticks_per_second = 60; /* magic fallback value; may be bogus */
#  endif
#endif
    }
    Py_INCREF((PyObject*) &StatResultType);
    PyModule_AddObject(m, "stat_result", (PyObject*) &StatResultType);
    //Py_INCREF((PyObject*) &StatVFSResultType);
    //PyModule_AddObject(m, "statvfs_result",
    //                   (PyObject*) &StatVFSResultType);
    initialized = 1;

}

#ifdef __cplusplus
}
#endif