/** @file
  The file provides Database manager for HII-related data
  structures.

Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef __HII_DATABASE_H__
#define __HII_DATABASE_H__

#define EFI_HII_DATABASE_PROTOCOL_GUID \
  { 0xef9fc172, 0xa1b2, 0x4693, { 0xb3, 0x27, 0x6d, 0x32, 0xfc, 0x41, 0x60, 0x42 } }


typedef struct _EFI_HII_DATABASE_PROTOCOL EFI_HII_DATABASE_PROTOCOL;


///
/// EFI_HII_DATABASE_NOTIFY_TYPE.
///
typedef UINTN   EFI_HII_DATABASE_NOTIFY_TYPE;

#define EFI_HII_DATABASE_NOTIFY_NEW_PACK    0x00000001
#define EFI_HII_DATABASE_NOTIFY_REMOVE_PACK 0x00000002
#define EFI_HII_DATABASE_NOTIFY_EXPORT_PACK 0x00000004
#define EFI_HII_DATABASE_NOTIFY_ADD_PACK    0x00000008
/**

  Functions which are registered to receive notification of
  database events have this prototype. The actual event is encoded
  in NotifyType. The following table describes how PackageType,
  PackageGuid, Handle, and Package are used for each of the
  notification types.

  @param PackageType  Package type of the notification.

  @param PackageGuid  If PackageType is
                      EFI_HII_PACKAGE_TYPE_GUID, then this is
                      the pointer to the GUID from the Guid
                      field of EFI_HII_PACKAGE_GUID_HEADER.
                      Otherwise, it must be NULL.

  @param Package      Points to the package referred to by the notification.

  @param Handle       The handle of the package
                      list which contains the specified package.

  @param NotifyType   The type of change concerning the
                      database. See
                      EFI_HII_DATABASE_NOTIFY_TYPE.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_NOTIFY)(
  IN        UINT8                         PackageType,
  IN CONST  EFI_GUID                      *PackageGuid,
  IN CONST  EFI_HII_PACKAGE_HEADER        *Package,
  IN        EFI_HII_HANDLE                 Handle,
  IN        EFI_HII_DATABASE_NOTIFY_TYPE  NotifyType
);

/**

  This function adds the packages in the package list to the
  database and returns a handle. If there is a
  EFI_DEVICE_PATH_PROTOCOL associated with the DriverHandle, then
  this function will create a package of type
  EFI_PACKAGE_TYPE_DEVICE_PATH and add it to the package list. For
  each package in the package list, registered functions with the
  notification type NEW_PACK and having the same package type will
  be called. For each call to NewPackageList(), there should be a
  corresponding call to
  EFI_HII_DATABASE_PROTOCOL.RemovePackageList().

  @param This           A pointer to the EFI_HII_DATABASE_PROTOCOL instance.

  @param PackageList    A pointer to an EFI_HII_PACKAGE_LIST_HEADER structure.

  @param DriverHandle   Associate the package list with this EFI handle.
                        If a NULL is specified, this data will not be associate
                        with any drivers and cannot have a callback induced.

  @param Handle         A pointer to the EFI_HII_HANDLE instance.

  @retval EFI_SUCCESS           The package list associated with the
                                Handle was added to the HII database.

  @retval EFI_OUT_OF_RESOURCES  Unable to allocate necessary
                                resources for the new database
                                contents.

  @retval EFI_INVALID_PARAMETER PackageList is NULL, or Handle is NULL.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_NEW_PACK)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL   *This,
  IN CONST  EFI_HII_PACKAGE_LIST_HEADER *PackageList,
  IN        EFI_HANDLE                  DriverHandle, OPTIONAL
  OUT       EFI_HII_HANDLE               *Handle
);


/**

  This function removes the package list that is associated with a
  handle Handle from the HII database. Before removing the
  package, any registered functions with the notification type
  REMOVE_PACK and the same package type will be called. For each
  call to EFI_HII_DATABASE_PROTOCOL.NewPackageList(), there should
  be a corresponding call to RemovePackageList.

  @param This             A pointer to the EFI_HII_DATABASE_PROTOCOL instance.

  @param Handle           The handle that was registered to the data
                          that is requested for removal.

  @retval EFI_SUCCESS     The data associated with the Handle was
                          removed from the HII database.
  @retval EFI_NOT_FOUND   The specified Handle is not in database.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_REMOVE_PACK)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN        EFI_HII_HANDLE             Handle
);


/**

  This function updates the existing package list (which has the
  specified Handle) in the HII databases, using the new package
  list specified by PackageList. The update process has the
  following steps: Collect all the package types in the package
  list specified by PackageList. A package type consists of the
  Type field of EFI_HII_PACKAGE_HEADER and, if the Type is
  EFI_HII_PACKAGE_TYPE_GUID, the Guid field, as defined in
  EFI_HII_PACKAGE_GUID_HEADER. Iterate through the packages within
  the existing package list in the HII database specified by
  Handle. If a package's type matches one of the collected types collected
  in step 1, then perform the following steps:
  - Call any functions registered with the notification type
  REMOVE_PACK.
  - Remove the package from the package list and the HII
  database.
  Add all of the packages within the new package list specified
  by PackageList, using the following steps:
  - Add the package to the package list and the HII database.
  - Call any functions registered with the notification type
  ADD_PACK.

  @param This         A pointer to the EFI_HII_DATABASE_PROTOCOL instance.

  @param Handle       The handle that was registered to the data
                      that is requested for removal.

  @param PackageList  A pointer to an EFI_HII_PACKAGE_LIST
                      package.

  @retval EFI_SUCCESS            The HII database was successfully updated.

  @retval EFI_OUT_OF_RESOURCES   Unable to allocate enough memory
                                 for the updated database.

  @retval EFI_INVALID_PARAMETER  PackageList was NULL.
  @retval EFI_NOT_FOUND          The specified Handle is not in database.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_UPDATE_PACK)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL   *This,
  IN        EFI_HII_HANDLE               Handle,
  IN CONST  EFI_HII_PACKAGE_LIST_HEADER *PackageList
);


/**

  This function returns a list of the package handles of the
  specified type that are currently active in the database. The
  pseudo-type EFI_HII_PACKAGE_TYPE_ALL will cause all package
  handles to be listed.

  @param This                 A pointer to the EFI_HII_DATABASE_PROTOCOL instance.

  @param PackageType          Specifies the package type of the packages
                              to list or EFI_HII_PACKAGE_TYPE_ALL for
                              all packages to be listed.

  @param PackageGuid          If PackageType is
                              EFI_HII_PACKAGE_TYPE_GUID, then this is
                              the pointer to the GUID which must match
                              the Guid field of
                              EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it
                              must be NULL.

  @param HandleBufferLength   On input, a pointer to the length
                              of the handle buffer. On output,
                              the length of the handle buffer
                              that is required for the handles found.

  @param Handle               An array of EFI_HII_HANDLE instances returned.

  @retval EFI_SUCCESS           The matching handles are outputted successfully.
                                HandleBufferLength is updated with the actual length.
  @retval EFI_BUFFER_TOO_SMALL  The HandleBufferLength parameter
                                indicates that Handle is too
                                small to support the number of
                                handles. HandleBufferLength is
                                updated with a value that will
                                enable the data to fit.
  @retval EFI_NOT_FOUND         No matching handle could be found in database.
  @retval EFI_INVALID_PARAMETER HandleBufferLength was NULL.
  @retval EFI_INVALID_PARAMETER The value referenced by HandleBufferLength was not
                                zero and Handle was NULL.
  @retval EFI_INVALID_PARAMETER PackageType is not a EFI_HII_PACKAGE_TYPE_GUID but
                                PackageGuid is not NULL, PackageType is a EFI_HII_
                                PACKAGE_TYPE_GUID but PackageGuid is NULL.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_LIST_PACKS)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN        UINT8                     PackageType,
  IN CONST  EFI_GUID                  *PackageGuid,
  IN OUT    UINTN                     *HandleBufferLength,
  OUT       EFI_HII_HANDLE            *Handle
);

/**

  This function will export one or all package lists in the
  database to a buffer. For each package list exported, this
  function will call functions registered with EXPORT_PACK and
  then copy the package list to the buffer. The registered
  functions may call EFI_HII_DATABASE_PROTOCOL.UpdatePackageList()
  to modify the package list before it is copied to the buffer. If
  the specified BufferSize is too small, then the status
  EFI_OUT_OF_RESOURCES will be returned and the actual package
  size will be returned in BufferSize.

  @param This         A pointer to the EFI_HII_DATABASE_PROTOCOL instance.


  @param Handle       An EFI_HII_HANDLE  that corresponds to the
                      desired package list in the HII database to
                      export or NULL to indicate all package lists
                      should be exported.

  @param BufferSize   On input, a pointer to the length of the
                      buffer. On output, the length of the
                      buffer that is required for the exported
                      data.

  @param Buffer       A pointer to a buffer that will contain the
                      results of the export function.


  @retval EFI_SUCCESS           Package exported.

  @retval EFI_OUT_OF_RESOURCES  BufferSize is too small to hold the package.

  @retval EFI_NOT_FOUND         The specified Handle could not be found in the
                                current database.

  @retval EFI_INVALID_PARAMETER BufferSize was NULL.

  @retval EFI_INVALID_PARAMETER The value referenced by BufferSize was not zero
                                and Buffer was NULL.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_EXPORT_PACKS)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL      *This,
  IN        EFI_HII_HANDLE                 Handle,
  IN OUT    UINTN                          *BufferSize,
  OUT       EFI_HII_PACKAGE_LIST_HEADER    *Buffer
);


/**


  This function registers a function which will be called when
  specified actions related to packages of the specified type
  occur in the HII database. By registering a function, other
  HII-related drivers are notified when specific package types
  are added, removed or updated in the HII database. Each driver
  or application which registers a notification should use
  EFI_HII_DATABASE_PROTOCOL.UnregisterPackageNotify() before
  exiting.


  @param This             A pointer to the EFI_HII_DATABASE_PROTOCOL instance.

  @param PackageType      The package type. See
                          EFI_HII_PACKAGE_TYPE_x in EFI_HII_PACKAGE_HEADER.

  @param PackageGuid      If PackageType is
                          EFI_HII_PACKAGE_TYPE_GUID, then this is
                          the pointer to the GUID which must match
                          the Guid field of
                          EFI_HII_PACKAGE_GUID_HEADER. Otherwise, it
                          must be NULL.

  @param PackageNotifyFn  Points to the function to be called
                          when the event specified by
                          NotificationType occurs. See
                          EFI_HII_DATABASE_NOTIFY.

  @param NotifyType       Describes the types of notification which
                          this function will be receiving. See
                          EFI_HII_DATABASE_NOTIFY_TYPE for a
                          list of types.

  @param NotifyHandle     Points to the unique handle assigned to
                          the registered notification. Can be used
                          in EFI_HII_DATABASE_PROTOCOL.UnregisterPack
                          to stop notifications.


  @retval EFI_SUCCESS           Notification registered successfully.

  @retval EFI_OUT_OF_RESOURCES  Unable to allocate necessary
                                data structures.

  @retval EFI_INVALID_PARAMETER PackageGuid is not NULL when
                                PackageType is not
                                EFI_HII_PACKAGE_TYPE_GUID.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_REGISTER_NOTIFY)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL     *This,
  IN        UINT8                         PackageType,
  IN CONST  EFI_GUID                      *PackageGuid,
  IN        EFI_HII_DATABASE_NOTIFY       PackageNotifyFn,
  IN        EFI_HII_DATABASE_NOTIFY_TYPE  NotifyType,
  OUT       EFI_HANDLE                    *NotifyHandle
);


/**

  Removes the specified HII database package-related notification.

  @param This                 A pointer to the EFI_HII_DATABASE_PROTOCOL instance.

  @param NotificationHandle   The handle of the notification
                              function being unregistered.

  @retval EFI_SUCCESS   Successsfully unregistered the notification.

  @retval EFI_NOT_FOUND The incoming notification handle does not exist
                        in the current hii database.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_UNREGISTER_NOTIFY)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN        EFI_HANDLE                NotificationHandle
);


/**

  This routine retrieves an array of GUID values for each keyboard
  layout that was previously registered in the system.

  @param This                 A pointer to the EFI_HII_PROTOCOL instance.

  @param KeyGuidBufferLength  On input, a pointer to the length
                              of the keyboard GUID buffer. On
                              output, the length of the handle
                              buffer that is required for the
                              handles found.

  @param KeyGuidBuffer        An array of keyboard layout GUID
                              instances returned.

  @retval EFI_SUCCESS           KeyGuidBuffer was updated successfully.

  @retval EFI_BUFFER_TOO_SMALL  The KeyGuidBufferLength
                                parameter indicates that
                                KeyGuidBuffer is too small to
                                support the number of GUIDs.
                                KeyGuidBufferLength is updated
                                with a value that will enable
                                the data to fit.
  @retval EFI_INVALID_PARAMETER The KeyGuidBufferLength is NULL.
  @retval EFI_INVALID_PARAMETER The value referenced by
                                KeyGuidBufferLength is not
                                zero and KeyGuidBuffer is NULL.
  @retval EFI_NOT_FOUND         There was no keyboard layout.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_FIND_KEYBOARD_LAYOUTS)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN OUT    UINT16                    *KeyGuidBufferLength,
  OUT       EFI_GUID                  *KeyGuidBuffer
);


/**

  This routine retrieves the requested keyboard layout. The layout
  is a physical description of the keys on a keyboard, and the
  character(s) that are associated with a particular set of key
  strokes.

  @param This                   A pointer to the EFI_HII_PROTOCOL instance.

  @param KeyGuid                A pointer to the unique ID associated with a
                                given keyboard layout. If KeyGuid is NULL then
                                the current layout will be retrieved.

  @param KeyboardLayoutLength   On input, a pointer to the length of the
                                KeyboardLayout buffer.  On output, the length of
                                the data placed into KeyboardLayout.

  @param KeyboardLayout         A pointer to a buffer containing the
                                retrieved keyboard layout.

  @retval EFI_SUCCESS   The keyboard layout was retrieved
                        successfully.

  @retval EFI_NOT_FOUND The requested keyboard layout was not found.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN CONST  EFI_GUID                  *KeyGuid,
  IN OUT UINT16                       *KeyboardLayoutLength,
  OUT       EFI_HII_KEYBOARD_LAYOUT   *KeyboardLayout
);

/**

  This routine sets the default keyboard layout to the one
  referenced by KeyGuid. When this routine is called, an event
  will be signaled of the EFI_HII_SET_KEYBOARD_LAYOUT_EVENT_GUID
  group type. This is so that agents which are sensitive to the
  current keyboard layout being changed can be notified of this
  change.

  @param This      A pointer to the EFI_HII_PROTOCOL instance.

  @param KeyGuid   A pointer to the unique ID associated with a
                   given keyboard layout.

  @retval EFI_SUCCESS    The current keyboard layout was successfully set.

  @retval EFI_NOT_FOUND  The referenced keyboard layout was not
                         found, so action was taken.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_SET_KEYBOARD_LAYOUT)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN CONST  EFI_GUID                  *KeyGuid
);

/**

  Return the EFI handle associated with a package list.

  @param This               A pointer to the EFI_HII_PROTOCOL instance.

  @param PackageListHandle  An EFI_HII_HANDLE  that corresponds
                            to the desired package list in the
                            HIIdatabase.

  @param DriverHandle       On return, contains the EFI_HANDLE which
                            was registered with the package list in
                            NewPackageList().

  @retval EFI_SUCCESS            The DriverHandle was returned successfully.

  @retval EFI_INVALID_PARAMETER  The PackageListHandle was not valid.

**/
typedef
EFI_STATUS
(EFIAPI *EFI_HII_DATABASE_GET_PACK_HANDLE)(
  IN CONST  EFI_HII_DATABASE_PROTOCOL *This,
  IN        EFI_HII_HANDLE             PackageListHandle,
  OUT       EFI_HANDLE                *DriverHandle
);

///
/// Database manager for HII-related data structures.
///
struct _EFI_HII_DATABASE_PROTOCOL {
  EFI_HII_DATABASE_NEW_PACK           NewPackageList;
  EFI_HII_DATABASE_REMOVE_PACK        RemovePackageList;
  EFI_HII_DATABASE_UPDATE_PACK        UpdatePackageList;
  EFI_HII_DATABASE_LIST_PACKS         ListPackageLists;
  EFI_HII_DATABASE_EXPORT_PACKS       ExportPackageLists;
  EFI_HII_DATABASE_REGISTER_NOTIFY    RegisterPackageNotify;
  EFI_HII_DATABASE_UNREGISTER_NOTIFY  UnregisterPackageNotify;
  EFI_HII_FIND_KEYBOARD_LAYOUTS       FindKeyboardLayouts;
  EFI_HII_GET_KEYBOARD_LAYOUT         GetKeyboardLayout;
  EFI_HII_SET_KEYBOARD_LAYOUT         SetKeyboardLayout;
  EFI_HII_DATABASE_GET_PACK_HANDLE    GetPackageListHandle;
};

extern EFI_GUID gEfiHiiDatabaseProtocolGuid;

#endif