/** @file
  Trace reporting for the Dp utility.

  Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.
  (C) Copyright 2015-2016 Hewlett Packard Enterprise Development LP<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent
**/

#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/PeCoffGetEntryPointLib.h>
#include <Library/PerformanceLib.h>
#include <Library/PrintLib.h>
#include <Library/HiiLib.h>
#include <Library/PcdLib.h>

#include "Dp.h"
#include "Literals.h"
#include "DpInternal.h"

/**
  Attempts to retrieve a performance measurement log entry from the performance measurement log.


  @param  LogEntryKey             On entry, the key of the performance measurement log entry to retrieve.
                                  0, then the first performance measurement log entry is retrieved.
                                  On exit, the key of the next performance log entry.
  @param  Handle                  Pointer to environment specific context used to identify the component
                                  being measured.
  @param  Token                   Pointer to a Null-terminated ASCII string that identifies the component
                                  being measured.
  @param  Module                  Pointer to a Null-terminated ASCII string that identifies the module
                                  being measured.
  @param  StartTimeStamp          Pointer to the 64-bit time stamp that was recorded when the measurement
                                  was started.
  @param  EndTimeStamp            Pointer to the 64-bit time stamp that was recorded when the measurement
                                  was ended.
  @param  Identifier              Pointer to the 32-bit identifier that was recorded when the measurement
                                  was ended.

  @return The key for the next performance log entry (in general case).

**/
UINTN
GetPerformanceMeasurementRecord (
  IN  UINTN        LogEntryKey,
  OUT CONST VOID   **Handle,
  OUT CONST CHAR8  **Token,
  OUT CONST CHAR8  **Module,
  OUT UINT64       *StartTimeStamp,
  OUT UINT64       *EndTimeStamp,
  OUT UINT32       *Identifier
  )
{
  if (LogEntryKey == mMeasurementNum) {
    return 0;
  }

  *Handle         = (VOID *)(UINTN)mMeasurementList[LogEntryKey].Handle;
  *Token          = mMeasurementList[LogEntryKey].Token;
  *Module         = mMeasurementList[LogEntryKey].Module;
  *StartTimeStamp = mMeasurementList[LogEntryKey].StartTimeStamp;
  *EndTimeStamp   = mMeasurementList[LogEntryKey].EndTimeStamp;
  *Identifier     = mMeasurementList[LogEntryKey].Identifier;

  LogEntryKey++;

  return LogEntryKey;
}

/**
  Collect verbose statistics about the logged performance measurements.

  General Summary information for all Trace measurements is gathered and
  stored within the SummaryData structure.  This information is both
  used internally by subsequent reporting functions, and displayed
  at the end of verbose reports.

  @pre  The SummaryData and CumData structures must be initialized
        prior to calling this function.

  @post The SummaryData and CumData structures contain statistics for the
        current performance logs.

  @param[in, out] CustomCumulativeData  A pointer to the custom cumulative data.

**/
VOID
GatherStatistics (
  IN OUT PERF_CUM_DATA  *CustomCumulativeData OPTIONAL
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              Duration;
  UINTN               LogEntryKey;
  INTN                TIndex;

  LogEntryKey = 0;
  while ((LogEntryKey = GetPerformanceMeasurementRecord (
                          LogEntryKey,
                          &Measurement.Handle,
                          &Measurement.Token,
                          &Measurement.Module,
                          &Measurement.StartTimeStamp,
                          &Measurement.EndTimeStamp,
                          &Measurement.Identifier
                          )) != 0)
  {
    ++SummaryData.NumTrace;           // Count the number of TRACE Measurement records
    if (Measurement.EndTimeStamp == 0) {
      ++SummaryData.NumIncomplete;    // Count the incomplete records
      continue;
    }

    if (Measurement.Handle != NULL) {
      ++SummaryData.NumHandles;       // Count the number of measurements with non-NULL handles
    }

    if (IsPhase (&Measurement)) {
      ++SummaryData.NumSummary;       // Count the number of major phases
    } else {
      // !IsPhase
      if (Measurement.Handle == NULL) {
        ++SummaryData.NumGlobal;
      }
    }

    if (AsciiStrCmp (Measurement.Token, ALit_PEIM) == 0) {
      ++SummaryData.NumPEIMs;         // Count PEIM measurements
    }

    Duration = GetDuration (&Measurement);
    TIndex   = GetCumulativeItem (&Measurement);
    if (TIndex >= 0) {
      CumData[TIndex].Duration += Duration;
      CumData[TIndex].Count++;
      if ( Duration < CumData[TIndex].MinDur ) {
        CumData[TIndex].MinDur = Duration;
      }

      if ( Duration > CumData[TIndex].MaxDur ) {
        CumData[TIndex].MaxDur = Duration;
      }
    }

    //
    // Collect the data for custom cumulative data.
    //
    if ((CustomCumulativeData != NULL) && (AsciiStrCmp (Measurement.Token, CustomCumulativeData->Name) == 0)) {
      CustomCumulativeData->Duration += Duration;
      CustomCumulativeData->Count++;
      if (Duration < CustomCumulativeData->MinDur) {
        CustomCumulativeData->MinDur = Duration;
      }

      if (Duration > CustomCumulativeData->MaxDur) {
        CustomCumulativeData->MaxDur = Duration;
      }
    }
  }
}

/**
  Gather and print ALL Trace Records.

  Displays all "interesting" Trace measurements in order.<BR>
  The number of records displayed is controlled by:
     - records with a duration less than mInterestThreshold microseconds are not displayed.
     - No more than Limit records are displayed.  A Limit of zero will not limit the output.
     - If the ExcludeFlag is TRUE, records matching entries in the CumData array are not
       displayed.

  @pre    The mInterestThreshold global variable is set to the shortest duration to be printed.
           The mGaugeString and mUnicodeToken global arrays are used for temporary string storage.
           They must not be in use by a calling function.

  @param[in]    Limit       The number of records to print.  Zero is ALL.
  @param[in]    ExcludeFlag TRUE to exclude individual Cumulative items from display.

  @retval EFI_SUCCESS           The operation was successful.
  @retval EFI_ABORTED           The user aborts the operation.
  @return Others                from a call to gBS->LocateHandleBuffer().
**/
EFI_STATUS
DumpAllTrace (
  IN UINTN    Limit,
  IN BOOLEAN  ExcludeFlag
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              ElapsedTime;
  UINT64              Duration;
  CHAR16              *IncFlag;
  UINTN               LogEntryKey;
  UINTN               Count;
  UINTN               Index;
  UINTN               TIndex;

  EFI_HANDLE  *HandleBuffer;
  UINTN       HandleCount;
  EFI_STATUS  Status;
  EFI_STRING  StringPtrUnknown;

  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  IncFlag          = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_ALL), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (IncFlag == NULL) ? StringPtrUnknown : IncFlag
    );
  FreePool (StringPtrUnknown);

  // Get Handle information
  //
  Status = gBS->LocateHandleBuffer (AllHandles, NULL, NULL, &HandleCount, &HandleBuffer);
  if (EFI_ERROR (Status)) {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLES_ERROR), mDpHiiHandle, Status);
  } else {
    // We have successfully populated the HandleBuffer
    // Display ALL Measurement Records
    //    Up to Limit lines displayed
    //    Display only records with Elapsed times >= mInterestThreshold
    //    Display driver names in Module field for records with Handles.
    //
    if (mShowId) {
      ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_HEADR2), mDpHiiHandle);
      ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_DASHES2), mDpHiiHandle);
    } else {
      ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_ALL_HEADR), mDpHiiHandle);
      ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle);
    }

    LogEntryKey = 0;
    Count       = 0;
    Index       = 0;
    while ( WITHIN_LIMIT (Count, Limit) &&
            ((LogEntryKey = GetPerformanceMeasurementRecord (
                              LogEntryKey,
                              &Measurement.Handle,
                              &Measurement.Token,
                              &Measurement.Module,
                              &Measurement.StartTimeStamp,
                              &Measurement.EndTimeStamp,
                              &Measurement.Identifier
                              )) != 0)
            )
    {
      ++Index;    // Count every record.  First record is 1.
      ElapsedTime = 0;
      SHELL_FREE_NON_NULL (IncFlag);
      if (Measurement.EndTimeStamp != 0) {
        Duration    = GetDuration (&Measurement);
        ElapsedTime = DurationInMicroSeconds (Duration);
        IncFlag     = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_COMPLETE), NULL);
      } else {
        IncFlag = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_INCOMPLETE), NULL);  // Mark incomplete records
      }

      if (((Measurement.EndTimeStamp != 0) && (ElapsedTime < mInterestThreshold)) ||
          ((ExcludeFlag) && (GetCumulativeItem (&Measurement) >= 0))
          )       // Ignore "uninteresting" or excluded records
      {
        continue;
      }

      ++Count;    // Count the number of records printed

      // If Handle is non-zero, see if we can determine a name for the driver
      AsciiStrToUnicodeStrS (Measurement.Module, mGaugeString, ARRAY_SIZE (mGaugeString)); // Use Module by default
      AsciiStrToUnicodeStrS (Measurement.Token, mUnicodeToken, ARRAY_SIZE (mUnicodeToken));
      if (Measurement.Handle != NULL) {
        // See if the Handle is in the HandleBuffer
        for (TIndex = 0; TIndex < HandleCount; TIndex++) {
          if (Measurement.Handle == HandleBuffer[TIndex]) {
            DpGetNameFromHandle (HandleBuffer[TIndex]);
            break;
          }
        }
      }

      if (AsciiStrCmp (Measurement.Token, ALit_PEIM) == 0) {
        UnicodeSPrint (mGaugeString, sizeof (mGaugeString), L"%g", Measurement.Handle);
      }

      // Ensure that the argument strings are not too long.
      mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;
      mUnicodeToken[13]                    = 0;

      if (mShowId) {
        ShellPrintHiiEx (
          -1,
          -1,
          NULL,
          STRING_TOKEN (STR_DP_ALL_VARS2),
          mDpHiiHandle,
          Index,      // 1 based, Which measurement record is being printed
          IncFlag,
          Measurement.Handle,
          mGaugeString,
          mUnicodeToken,
          ElapsedTime,
          Measurement.Identifier
          );
      } else {
        ShellPrintHiiEx (
          -1,
          -1,
          NULL,
          STRING_TOKEN (STR_DP_ALL_VARS),
          mDpHiiHandle,
          Index,      // 1 based, Which measurement record is being printed
          IncFlag,
          Measurement.Handle,
          mGaugeString,
          mUnicodeToken,
          ElapsedTime
          );
      }

      if (ShellGetExecutionBreakFlag ()) {
        Status = EFI_ABORTED;
        break;
      }
    }
  }

  if (HandleBuffer != NULL) {
    FreePool (HandleBuffer);
  }

  SHELL_FREE_NON_NULL (IncFlag);

  return Status;
}

/**
  Gather and print Raw Trace Records.

  All Trace measurements with a duration greater than or equal to
  mInterestThreshold are printed without interpretation.

  The number of records displayed is controlled by:
     - records with a duration less than mInterestThreshold microseconds are not displayed.
     - No more than Limit records are displayed.  A Limit of zero will not limit the output.
     - If the ExcludeFlag is TRUE, records matching entries in the CumData array are not
       displayed.

  @pre    The mInterestThreshold global variable is set to the shortest duration to be printed.

  @param[in]    Limit       The number of records to print.  Zero is ALL.
  @param[in]    ExcludeFlag TRUE to exclude individual Cumulative items from display.

  @retval EFI_SUCCESS           The operation was successful.
  @retval EFI_ABORTED           The user aborts the operation.
**/
EFI_STATUS
DumpRawTrace (
  IN UINTN    Limit,
  IN BOOLEAN  ExcludeFlag
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              ElapsedTime;
  UINT64              Duration;
  UINTN               LogEntryKey;
  UINTN               Count;
  UINTN               Index;

  EFI_STRING  StringPtr;
  EFI_STRING  StringPtrUnknown;
  EFI_STATUS  Status;

  Status = EFI_SUCCESS;

  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  StringPtr        = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_RAWTRACE), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (StringPtr == NULL) ? StringPtrUnknown : StringPtr
    );
  FreePool (StringPtr);
  FreePool (StringPtrUnknown);

  if (mShowId) {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_HEADR2), mDpHiiHandle);
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_DASHES2), mDpHiiHandle);
  } else {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_HEADR), mDpHiiHandle);
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RAW_DASHES), mDpHiiHandle);
  }

  LogEntryKey = 0;
  Count       = 0;
  Index       = 0;
  while ( WITHIN_LIMIT (Count, Limit) &&
          ((LogEntryKey = GetPerformanceMeasurementRecord (
                            LogEntryKey,
                            &Measurement.Handle,
                            &Measurement.Token,
                            &Measurement.Module,
                            &Measurement.StartTimeStamp,
                            &Measurement.EndTimeStamp,
                            &Measurement.Identifier
                            )) != 0)
          )
  {
    ++Index;    // Count every record.  First record is 1.
    ElapsedTime = 0;
    if (Measurement.EndTimeStamp != 0) {
      Duration    = GetDuration (&Measurement);
      ElapsedTime = DurationInMicroSeconds (Duration);
    }

    if ((ElapsedTime < mInterestThreshold)                 ||
        ((ExcludeFlag) && (GetCumulativeItem (&Measurement) >= 0))
        )   // Ignore "uninteresting" or Excluded records
    {
      continue;
    }

    ++Count;    // Count the number of records printed

    if (mShowId) {
      ShellPrintHiiEx (
        -1,
        -1,
        NULL,
        STRING_TOKEN (STR_DP_RAW_VARS2),
        mDpHiiHandle,
        Index,      // 1 based, Which measurement record is being printed
        Measurement.Handle,
        Measurement.StartTimeStamp,
        Measurement.EndTimeStamp,
        Measurement.Token,
        Measurement.Module,
        Measurement.Identifier
        );
    } else {
      ShellPrintHiiEx (
        -1,
        -1,
        NULL,
        STRING_TOKEN (STR_DP_RAW_VARS),
        mDpHiiHandle,
        Index,      // 1 based, Which measurement record is being printed
        Measurement.Handle,
        Measurement.StartTimeStamp,
        Measurement.EndTimeStamp,
        Measurement.Token,
        Measurement.Module
        );
    }

    if (ShellGetExecutionBreakFlag ()) {
      Status = EFI_ABORTED;
      break;
    }
  }

  return Status;
}

/**
  Gather and print Major Phase metrics.

**/
VOID
ProcessPhases (
  VOID
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              BdsTimeoutValue;
  UINT64              SecTime;
  UINT64              PeiTime;
  UINT64              DxeTime;
  UINT64              BdsTime;
  UINT64              ElapsedTime;
  UINT64              Duration;
  UINT64              Total;
  EFI_STRING          StringPtr;
  UINTN               LogEntryKey;
  EFI_STRING          StringPtrUnknown;

  BdsTimeoutValue = 0;
  SecTime         = 0;
  PeiTime         = 0;
  DxeTime         = 0;
  BdsTime         = 0;
  //
  // Get Execution Phase Statistics
  //
  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  StringPtr        = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_PHASES), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (StringPtr == NULL) ? StringPtrUnknown : StringPtr
    );
  FreePool (StringPtr);
  FreePool (StringPtrUnknown);

  LogEntryKey = 0;
  while ((LogEntryKey = GetPerformanceMeasurementRecord (
                          LogEntryKey,
                          &Measurement.Handle,
                          &Measurement.Token,
                          &Measurement.Module,
                          &Measurement.StartTimeStamp,
                          &Measurement.EndTimeStamp,
                          &Measurement.Identifier
                          )) != 0)
  {
    if (Measurement.EndTimeStamp == 0) {
      // Skip "incomplete" records
      continue;
    }

    Duration = GetDuration (&Measurement);
    if (  (Measurement.Handle != NULL)
       && (AsciiStrCmp (Measurement.Token, ALit_BdsTO) == 0)
          )
    {
      BdsTimeoutValue = Duration;
    } else if (AsciiStrCmp (Measurement.Token, ALit_SEC) == 0) {
      SecTime = Duration;
    } else if (AsciiStrCmp (Measurement.Token, ALit_PEI) == 0) {
      PeiTime = Duration;
    } else if (AsciiStrCmp (Measurement.Token, ALit_DXE) == 0) {
      DxeTime = Duration;
    } else if (AsciiStrCmp (Measurement.Token, ALit_BDS) == 0) {
      BdsTime = Duration;
    }
  }

  Total = 0;

  // print Reset End if it's valid
  //
  if (SecTime > mResetEnd) {
    SecTime     = SecTime - mResetEnd;                // Calculate sec time duration start from the beginning of firmware image execution
    ElapsedTime = DurationInMicroSeconds (mResetEnd); // Calculate elapsed time in microseconds
    Total      += DivU64x32 (ElapsedTime, 1000);      // Accumulate time in milliseconds
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_RESET_END), mDpHiiHandle, ElapsedTime);
  }

  // print SEC phase duration time
  //
  if (SecTime > 0) {
    ElapsedTime = DurationInMicroSeconds (SecTime); // Calculate elapsed time in microseconds
    Total      += DivU64x32 (ElapsedTime, 1000);    // Accumulate time in milliseconds
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_SEC_PHASE), mDpHiiHandle, ElapsedTime);
  }

  // print PEI phase duration time
  //
  if (PeiTime > 0) {
    ElapsedTime = DivU64x32 (PeiTime, 1000000);
    Total      += ElapsedTime;
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_DURATION), mDpHiiHandle, ALit_PEI, ElapsedTime);
  }

  // print DXE phase duration time
  //
  if (DxeTime > 0) {
    ElapsedTime = DivU64x32 (DxeTime, 1000000);
    Total      += ElapsedTime;
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_DURATION), mDpHiiHandle, ALit_DXE, ElapsedTime);
  }

  // print BDS phase duration time
  //
  if (BdsTime > 0) {
    ElapsedTime = DivU64x32 (BdsTime, 1000000);
    Total      += ElapsedTime;
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_DURATION), mDpHiiHandle, ALit_BDS, ElapsedTime);
  }

  if (BdsTimeoutValue > 0) {
    ElapsedTime = DivU64x32 (BdsTimeoutValue, 1000000);
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PHASE_BDSTO), mDpHiiHandle, ALit_BdsTO, ElapsedTime);
  }

  ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_TOTAL_DURATION), mDpHiiHandle, Total);
}

/**
  Gather and print Handle data.

  @param[in]    ExcludeFlag   TRUE to exclude individual Cumulative items from display.

  @retval EFI_SUCCESS             The operation was successful.
  @retval EFI_ABORTED             The user aborts the operation.
  @return Others                  from a call to gBS->LocateHandleBuffer().
**/
EFI_STATUS
ProcessHandles (
  IN BOOLEAN  ExcludeFlag
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              ElapsedTime;
  UINT64              Duration;
  EFI_HANDLE          *HandleBuffer;
  EFI_STRING          StringPtr;
  UINTN               Index;
  UINTN               LogEntryKey;
  UINTN               Count;
  UINTN               HandleCount;
  EFI_STATUS          Status;
  EFI_STRING          StringPtrUnknown;

  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  StringPtr        = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_DRIVERS), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (StringPtr == NULL) ? StringPtrUnknown : StringPtr
    );
  FreePool (StringPtr);
  FreePool (StringPtrUnknown);

  Status = gBS->LocateHandleBuffer (AllHandles, NULL, NULL, &HandleCount, &HandleBuffer);
  if (EFI_ERROR (Status)) {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLES_ERROR), mDpHiiHandle, Status);
  } else {
 #if DP_DEBUG == 2
    Print (L"There are %,d Handles defined.\n", (Size / sizeof (HandleBuffer[0])));
 #endif

    if (mShowId) {
      ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLE_SECTION2), mDpHiiHandle);
    } else {
      ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_HANDLE_SECTION), mDpHiiHandle);
    }

    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle);

    LogEntryKey = 0;
    Count       = 0;
    while ((LogEntryKey = GetPerformanceMeasurementRecord (
                            LogEntryKey,
                            &Measurement.Handle,
                            &Measurement.Token,
                            &Measurement.Module,
                            &Measurement.StartTimeStamp,
                            &Measurement.EndTimeStamp,
                            &Measurement.Identifier
                            )) != 0)
    {
      Count++;
      Duration    = GetDuration (&Measurement);
      ElapsedTime = DurationInMicroSeconds (Duration);
      if ((ElapsedTime < mInterestThreshold)                 ||
          (Measurement.EndTimeStamp == 0)                    ||
          (!IsCorePerf (&Measurement))                       ||
          ((ExcludeFlag) && (GetCumulativeItem (&Measurement) >= 0))
          )  // Ignore "uninteresting" or excluded records
      {
        continue;
      }

      mGaugeString[0] = 0;    // Empty driver name by default
      AsciiStrToUnicodeStrS (Measurement.Token, mUnicodeToken, ARRAY_SIZE (mUnicodeToken));
      // See if the Handle is in the HandleBuffer
      for (Index = 0; Index < HandleCount; Index++) {
        if (Measurement.Handle == HandleBuffer[Index]) {
          DpGetNameFromHandle (HandleBuffer[Index]); // Name is put into mGaugeString
          break;
        }
      }

      // Ensure that the argument strings are not too long.
      mGaugeString[DP_GAUGE_STRING_LENGTH] = 0;
      mUnicodeToken[11]                    = 0;
      if (mGaugeString[0] != 0) {
        // Display the record if it has a valid handle.
        if (mShowId) {
          ShellPrintHiiEx (
            -1,
            -1,
            NULL,
            STRING_TOKEN (STR_DP_HANDLE_VARS2),
            mDpHiiHandle,
            Count,      // 1 based, Which measurement record is being printed
            Index + 1,  // 1 based, Which handle is being printed
            mGaugeString,
            mUnicodeToken,
            ElapsedTime,
            Measurement.Identifier
            );
        } else {
          ShellPrintHiiEx (
            -1,
            -1,
            NULL,
            STRING_TOKEN (STR_DP_HANDLE_VARS),
            mDpHiiHandle,
            Count,      // 1 based, Which measurement record is being printed
            Index + 1,  // 1 based, Which handle is being printed
            mGaugeString,
            mUnicodeToken,
            ElapsedTime
            );
        }
      }

      if (ShellGetExecutionBreakFlag ()) {
        Status = EFI_ABORTED;
        break;
      }
    }
  }

  if (HandleBuffer != NULL) {
    FreePool (HandleBuffer);
  }

  return Status;
}

/**
  Gather and print PEIM data.

  Only prints complete PEIM records

  @retval EFI_SUCCESS           The operation was successful.
  @retval EFI_ABORTED           The user aborts the operation.
**/
EFI_STATUS
ProcessPeims (
  VOID
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              Duration;
  UINT64              ElapsedTime;
  EFI_STRING          StringPtr;
  UINTN               LogEntryKey;
  UINTN               TIndex;
  EFI_STRING          StringPtrUnknown;
  EFI_STATUS          Status;

  Status = EFI_SUCCESS;

  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  StringPtr        = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_PEIMS), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (StringPtr == NULL) ? StringPtrUnknown : StringPtr
    );
  FreePool (StringPtr);
  FreePool (StringPtrUnknown);

  if (mShowId) {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PEIM_SECTION2), mDpHiiHandle);
  } else {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_PEIM_SECTION), mDpHiiHandle);
  }

  ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle);
  TIndex      = 0;
  LogEntryKey = 0;
  while ((LogEntryKey = GetPerformanceMeasurementRecord (
                          LogEntryKey,
                          &Measurement.Handle,
                          &Measurement.Token,
                          &Measurement.Module,
                          &Measurement.StartTimeStamp,
                          &Measurement.EndTimeStamp,
                          &Measurement.Identifier
                          )) != 0)
  {
    TIndex++;
    if ((Measurement.EndTimeStamp == 0) ||
        (AsciiStrCmp (Measurement.Token, ALit_PEIM) != 0)
        )
    {
      continue;
    }

    Duration    = GetDuration (&Measurement);
    ElapsedTime = DurationInMicroSeconds (Duration);    // Calculate elapsed time in microseconds
    if (ElapsedTime >= mInterestThreshold) {
      // PEIM FILE Handle is the start address of its FFS file that contains its file guid.
      if (mShowId) {
        ShellPrintHiiEx (
          -1,
          -1,
          NULL,
          STRING_TOKEN (STR_DP_PEIM_VARS2),
          mDpHiiHandle,
          TIndex,             // 1 based, Which measurement record is being printed
          Measurement.Handle, // file guid
          ElapsedTime,
          Measurement.Identifier
          );
      } else {
        ShellPrintHiiEx (
          -1,
          -1,
          NULL,
          STRING_TOKEN (STR_DP_PEIM_VARS),
          mDpHiiHandle,
          TIndex,             // 1 based, Which measurement record is being printed
          Measurement.Handle, // file guid
          ElapsedTime
          );
      }
    }

    if (ShellGetExecutionBreakFlag ()) {
      Status = EFI_ABORTED;
      break;
    }
  }

  return Status;
}

/**
  Gather and print global data.

  Strips out incomplete or "Execution Phase" records
  Only prints records where Handle is NULL
  Increment TIndex for every record, even skipped ones, so that we have an
  indication of every measurement record taken.

  @retval EFI_SUCCESS           The operation was successful.
  @retval EFI_ABORTED           The user aborts the operation.
**/
EFI_STATUS
ProcessGlobal (
  VOID
  )
{
  MEASUREMENT_RECORD  Measurement;
  UINT64              Duration;
  UINT64              ElapsedTime;
  EFI_STRING          StringPtr;
  UINTN               LogEntryKey;
  UINTN               Index;              // Index, or number, of the measurement record being processed
  EFI_STRING          StringPtrUnknown;
  EFI_STATUS          Status;

  Status = EFI_SUCCESS;

  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  StringPtr        = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_GENERAL), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (StringPtr == NULL) ? StringPtrUnknown : StringPtr
    );
  FreePool (StringPtr);
  FreePool (StringPtrUnknown);

  if (mShowId) {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_GLOBAL_SECTION2), mDpHiiHandle);
  } else {
    ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_GLOBAL_SECTION), mDpHiiHandle);
  }

  ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle);

  Index       = 1;
  LogEntryKey = 0;

  while ((LogEntryKey = GetPerformanceMeasurementRecord (
                          LogEntryKey,
                          &Measurement.Handle,
                          &Measurement.Token,
                          &Measurement.Module,
                          &Measurement.StartTimeStamp,
                          &Measurement.EndTimeStamp,
                          &Measurement.Identifier
                          )) != 0)
  {
    AsciiStrToUnicodeStrS (Measurement.Module, mGaugeString, ARRAY_SIZE (mGaugeString));
    AsciiStrToUnicodeStrS (Measurement.Token, mUnicodeToken, ARRAY_SIZE (mUnicodeToken));
    mGaugeString[25]  = 0;
    mUnicodeToken[31] = 0;
    if ( !(IsPhase (&Measurement)  ||
           IsCorePerf (&Measurement)      ||
           (Measurement.EndTimeStamp == 0)
           ))
    {
      Duration    = GetDuration (&Measurement);
      ElapsedTime = DurationInMicroSeconds (Duration);
      if (ElapsedTime >= mInterestThreshold) {
        if (mShowId) {
          ShellPrintHiiEx (
            -1,
            -1,
            NULL,
            STRING_TOKEN (STR_DP_GLOBAL_VARS2),
            mDpHiiHandle,
            Index,
            mGaugeString,
            mUnicodeToken,
            ElapsedTime,
            Measurement.Identifier
            );
        } else {
          ShellPrintHiiEx (
            -1,
            -1,
            NULL,
            STRING_TOKEN (STR_DP_GLOBAL_VARS),
            mDpHiiHandle,
            Index,
            mGaugeString,
            mUnicodeToken,
            ElapsedTime
            );
        }
      }
    }

    if (ShellGetExecutionBreakFlag ()) {
      Status = EFI_ABORTED;
      break;
    }

    Index++;
  }

  return Status;
}

/**
  Gather and print cumulative data.

  Traverse the measurement records and:<BR>
  For each record with a Token listed in the CumData array:<BR>
     - Update the instance count and the total, minimum, and maximum durations.
  Finally, print the gathered cumulative statistics.

  @param[in]    CustomCumulativeData  A pointer to the custom cumulative data.

**/
VOID
ProcessCumulative (
  IN PERF_CUM_DATA  *CustomCumulativeData OPTIONAL
  )
{
  UINT64      AvgDur;                       // the computed average duration
  UINT64      Dur;
  UINT64      MinDur;
  UINT64      MaxDur;
  EFI_STRING  StringPtr;
  UINTN       TIndex;
  EFI_STRING  StringPtrUnknown;

  StringPtrUnknown = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_ALIT_UNKNOWN), NULL);
  StringPtr        = HiiGetString (mDpHiiHandle, STRING_TOKEN (STR_DP_SECTION_CUMULATIVE), NULL);
  ShellPrintHiiEx (
    -1,
    -1,
    NULL,
    STRING_TOKEN (STR_DP_SECTION_HEADER),
    mDpHiiHandle,
    (StringPtr == NULL) ? StringPtrUnknown : StringPtr
    );
  FreePool (StringPtr);
  FreePool (StringPtrUnknown);

  ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_CUMULATIVE_SECT_1), mDpHiiHandle);
  ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_CUMULATIVE_SECT_2), mDpHiiHandle);
  ShellPrintHiiEx (-1, -1, NULL, STRING_TOKEN (STR_DP_DASHES), mDpHiiHandle);

  for ( TIndex = 0; TIndex < NumCum; ++TIndex) {
    if (CumData[TIndex].Count != 0) {
      AvgDur = DivU64x32 (CumData[TIndex].Duration, CumData[TIndex].Count);
      AvgDur = DurationInMicroSeconds (AvgDur);
      Dur    = DurationInMicroSeconds (CumData[TIndex].Duration);
      MaxDur = DurationInMicroSeconds (CumData[TIndex].MaxDur);
      MinDur = DurationInMicroSeconds (CumData[TIndex].MinDur);

      ShellPrintHiiEx (
        -1,
        -1,
        NULL,
        STRING_TOKEN (STR_DP_CUMULATIVE_STATS),
        mDpHiiHandle,
        CumData[TIndex].Name,
        CumData[TIndex].Count,
        Dur,
        AvgDur,
        MinDur,
        MaxDur
        );
    }
  }

  //
  // Print the custom cumulative data.
  //
  if (CustomCumulativeData != NULL) {
    if (CustomCumulativeData->Count != 0) {
      AvgDur = DivU64x32 (CustomCumulativeData->Duration, CustomCumulativeData->Count);
      AvgDur = DurationInMicroSeconds (AvgDur);
      Dur    = DurationInMicroSeconds (CustomCumulativeData->Duration);
      MaxDur = DurationInMicroSeconds (CustomCumulativeData->MaxDur);
      MinDur = DurationInMicroSeconds (CustomCumulativeData->MinDur);
    } else {
      AvgDur = 0;
      Dur    = 0;
      MaxDur = 0;
      MinDur = 0;
    }

    ShellPrintHiiEx (
      -1,
      -1,
      NULL,
      STRING_TOKEN (STR_DP_CUMULATIVE_STATS),
      mDpHiiHandle,
      CustomCumulativeData->Name,
      CustomCumulativeData->Count,
      Dur,
      AvgDur,
      MinDur,
      MaxDur
      );
  }
}