/** @file

Copyright (c) 2010 - 2019, Intel Corporation. All rights reserved.<BR>

SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include <PiDxe.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiRuntimeServicesTableLib.h>
#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/LockBoxLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiLib.h>
#include <Protocol/SmmCommunication.h>
#include <Guid/SmmLockBox.h>
#include <Guid/PiSmmCommunicationRegionTable.h>

#include "SmmLockBoxLibPrivate.h"

EFI_SMM_COMMUNICATION_PROTOCOL  *mLockBoxSmmCommProtocol = NULL;
UINT8                           *mLockBoxSmmCommBuffer   = NULL;

/**
  Get smm communication protocol for lockbox.

  @return Pointer to smm communication protocol, NULL if not found.

**/
EFI_SMM_COMMUNICATION_PROTOCOL *
LockBoxGetSmmCommProtocol (
  VOID
  )
{
  EFI_STATUS  Status;

  //
  // If the protocol has been got previously, return it.
  //
  if (mLockBoxSmmCommProtocol != NULL) {
    return mLockBoxSmmCommProtocol;
  }

  Status = gBS->LocateProtocol (
                  &gEfiSmmCommunicationProtocolGuid,
                  NULL,
                  (VOID **)&mLockBoxSmmCommProtocol
                  );
  if (EFI_ERROR (Status)) {
    mLockBoxSmmCommProtocol = NULL;
  }

  return mLockBoxSmmCommProtocol;
}

/**
  Get smm communication buffer for lockbox.

  @return Pointer to smm communication buffer, NULL if not found.

**/
UINT8 *
LockBoxGetSmmCommBuffer (
  VOID
  )
{
  EFI_STATUS                               Status;
  UINTN                                    MinimalSizeNeeded;
  EDKII_PI_SMM_COMMUNICATION_REGION_TABLE  *PiSmmCommunicationRegionTable;
  UINT32                                   Index;
  EFI_MEMORY_DESCRIPTOR                    *Entry;
  UINTN                                    Size;

  //
  // If the buffer has been got previously, return it.
  //
  if (mLockBoxSmmCommBuffer != NULL) {
    return mLockBoxSmmCommBuffer;
  }

  MinimalSizeNeeded = sizeof (EFI_GUID) +
                      sizeof (UINTN) +
                      MAX (
                        sizeof (EFI_SMM_LOCK_BOX_PARAMETER_SAVE),
                        MAX (
                          sizeof (EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES),
                          MAX (
                            sizeof (EFI_SMM_LOCK_BOX_PARAMETER_UPDATE),
                            MAX (
                              sizeof (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE),
                              sizeof (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE)
                              )
                            )
                          )
                        );

  Status = EfiGetSystemConfigurationTable (
             &gEdkiiPiSmmCommunicationRegionTableGuid,
             (VOID **)&PiSmmCommunicationRegionTable
             );
  if (EFI_ERROR (Status)) {
    mLockBoxSmmCommBuffer = NULL;
    return mLockBoxSmmCommBuffer;
  }

  ASSERT (PiSmmCommunicationRegionTable != NULL);
  Entry = (EFI_MEMORY_DESCRIPTOR *)(PiSmmCommunicationRegionTable + 1);
  Size  = 0;
  for (Index = 0; Index < PiSmmCommunicationRegionTable->NumberOfEntries; Index++) {
    if (Entry->Type == EfiConventionalMemory) {
      Size = EFI_PAGES_TO_SIZE ((UINTN)Entry->NumberOfPages);
      if (Size >= MinimalSizeNeeded) {
        break;
      }
    }

    Entry = (EFI_MEMORY_DESCRIPTOR *)((UINT8 *)Entry + PiSmmCommunicationRegionTable->DescriptorSize);
  }

  if (Index >= PiSmmCommunicationRegionTable->NumberOfEntries) {
    mLockBoxSmmCommBuffer = NULL;
  } else {
    mLockBoxSmmCommBuffer = (UINT8 *)(UINTN)Entry->PhysicalStart;
  }

  return mLockBoxSmmCommBuffer;
}

/**
  This function will save confidential information to lockbox.

  @param Guid       the guid to identify the confidential information
  @param Buffer     the address of the confidential information
  @param Length     the length of the confidential information

  @retval RETURN_SUCCESS            the information is saved successfully.
  @retval RETURN_INVALID_PARAMETER  the Guid is NULL, or Buffer is NULL, or Length is 0
  @retval RETURN_ALREADY_STARTED    the requested GUID already exist.
  @retval RETURN_OUT_OF_RESOURCES   no enough resource to save the information.
  @retval RETURN_ACCESS_DENIED      it is too late to invoke this interface
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
SaveLockBox (
  IN  GUID   *Guid,
  IN  VOID   *Buffer,
  IN  UINTN  Length
  )
{
  EFI_STATUS                       Status;
  EFI_SMM_COMMUNICATION_PROTOCOL   *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_SAVE  *LockBoxParameterSave;
  EFI_SMM_COMMUNICATE_HEADER       *CommHeader;
  UINT8                            TempCommBuffer[sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_SAVE)];
  UINT8                            *CommBuffer;
  UINTN                            CommSize;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib SaveLockBox - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) || (Buffer == NULL) || (Length == 0)) {
    return EFI_INVALID_PARAMETER;
  }

  SmmCommunication = LockBoxGetSmmCommProtocol ();
  if (SmmCommunication == NULL) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommBuffer = LockBoxGetSmmCommBuffer ();
  if (CommBuffer == NULL) {
    CommBuffer = &TempCommBuffer[0];
  }

  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof (gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof (*LockBoxParameterSave);

  LockBoxParameterSave                      = (EFI_SMM_LOCK_BOX_PARAMETER_SAVE *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterSave->Header.Command      = EFI_SMM_LOCK_BOX_COMMAND_SAVE;
  LockBoxParameterSave->Header.DataLength   = sizeof (*LockBoxParameterSave);
  LockBoxParameterSave->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterSave->Guid, Guid, sizeof (*Guid));
  LockBoxParameterSave->Buffer = (EFI_PHYSICAL_ADDRESS)(UINTN)Buffer;
  LockBoxParameterSave->Length = (UINT64)Length;

  //
  // Send command
  //
  CommSize = sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_SAVE);
  Status   = SmmCommunication->Communicate (
                                 SmmCommunication,
                                 &CommBuffer[0],
                                 &CommSize
                                 );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterSave->Header.ReturnStatus;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib SaveLockBox - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will set lockbox attributes.

  @param Guid       the guid to identify the confidential information
  @param Attributes the attributes of the lockbox

  @retval RETURN_SUCCESS            the information is saved successfully.
  @retval RETURN_INVALID_PARAMETER  attributes is invalid.
  @retval RETURN_NOT_FOUND          the requested GUID not found.
  @retval RETURN_ACCESS_DENIED      it is too late to invoke this interface
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
SetLockBoxAttributes (
  IN  GUID    *Guid,
  IN  UINT64  Attributes
  )
{
  EFI_STATUS                                 Status;
  EFI_SMM_COMMUNICATION_PROTOCOL             *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES  *LockBoxParameterSetAttributes;
  EFI_SMM_COMMUNICATE_HEADER                 *CommHeader;
  UINT8                                      TempCommBuffer[sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES)];
  UINT8                                      *CommBuffer;
  UINTN                                      CommSize;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib SetLockBoxAttributes - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) ||
      ((Attributes & ~(LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE | LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY)) != 0))
  {
    return EFI_INVALID_PARAMETER;
  }

  SmmCommunication = LockBoxGetSmmCommProtocol ();
  if (SmmCommunication == NULL) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommBuffer = LockBoxGetSmmCommBuffer ();
  if (CommBuffer == NULL) {
    CommBuffer = &TempCommBuffer[0];
  }

  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof (gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof (*LockBoxParameterSetAttributes);

  LockBoxParameterSetAttributes                      = (EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterSetAttributes->Header.Command      = EFI_SMM_LOCK_BOX_COMMAND_SET_ATTRIBUTES;
  LockBoxParameterSetAttributes->Header.DataLength   = sizeof (*LockBoxParameterSetAttributes);
  LockBoxParameterSetAttributes->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterSetAttributes->Guid, Guid, sizeof (*Guid));
  LockBoxParameterSetAttributes->Attributes = (UINT64)Attributes;

  //
  // Send command
  //
  CommSize = sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_SET_ATTRIBUTES);
  Status   = SmmCommunication->Communicate (
                                 SmmCommunication,
                                 &CommBuffer[0],
                                 &CommSize
                                 );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterSetAttributes->Header.ReturnStatus;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib SetLockBoxAttributes - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will update confidential information to lockbox.

  @param Guid   the guid to identify the original confidential information
  @param Offset the offset of the original confidential information
  @param Buffer the address of the updated confidential information
  @param Length the length of the updated confidential information

  @retval RETURN_SUCCESS            the information is saved successfully.
  @retval RETURN_INVALID_PARAMETER  the Guid is NULL, or Buffer is NULL, or Length is 0.
  @retval RETURN_NOT_FOUND          the requested GUID not found.
  @retval RETURN_BUFFER_TOO_SMALL   for lockbox without attribute LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY,
                                    the original buffer to too small to hold new information.
  @retval RETURN_OUT_OF_RESOURCES   for lockbox with attribute LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY,
                                    no enough resource to save the information.
  @retval RETURN_ACCESS_DENIED      it is too late to invoke this interface
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
UpdateLockBox (
  IN  GUID   *Guid,
  IN  UINTN  Offset,
  IN  VOID   *Buffer,
  IN  UINTN  Length
  )
{
  EFI_STATUS                         Status;
  EFI_SMM_COMMUNICATION_PROTOCOL     *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_UPDATE  *LockBoxParameterUpdate;
  EFI_SMM_COMMUNICATE_HEADER         *CommHeader;
  UINT8                              TempCommBuffer[sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_UPDATE)];
  UINT8                              *CommBuffer;
  UINTN                              CommSize;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib UpdateLockBox - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) || (Buffer == NULL) || (Length == 0)) {
    return EFI_INVALID_PARAMETER;
  }

  SmmCommunication = LockBoxGetSmmCommProtocol ();
  if (SmmCommunication == NULL) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommBuffer = LockBoxGetSmmCommBuffer ();
  if (CommBuffer == NULL) {
    CommBuffer = &TempCommBuffer[0];
  }

  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof (gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof (*LockBoxParameterUpdate);

  LockBoxParameterUpdate                      = (EFI_SMM_LOCK_BOX_PARAMETER_UPDATE *)(UINTN)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterUpdate->Header.Command      = EFI_SMM_LOCK_BOX_COMMAND_UPDATE;
  LockBoxParameterUpdate->Header.DataLength   = sizeof (*LockBoxParameterUpdate);
  LockBoxParameterUpdate->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterUpdate->Guid, Guid, sizeof (*Guid));
  LockBoxParameterUpdate->Offset = (UINT64)Offset;
  LockBoxParameterUpdate->Buffer = (EFI_PHYSICAL_ADDRESS)(UINTN)Buffer;
  LockBoxParameterUpdate->Length = (UINT64)Length;

  //
  // Send command
  //
  CommSize = sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_UPDATE);
  Status   = SmmCommunication->Communicate (
                                 SmmCommunication,
                                 &CommBuffer[0],
                                 &CommSize
                                 );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterUpdate->Header.ReturnStatus;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib UpdateLockBox - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will restore confidential information from lockbox.

  @param Guid   the guid to identify the confidential information
  @param Buffer the address of the restored confidential information
                NULL means restored to original address, Length MUST be NULL at same time.
  @param Length the length of the restored confidential information

  @retval RETURN_SUCCESS            the information is restored successfully.
  @retval RETURN_INVALID_PARAMETER  the Guid is NULL, or one of Buffer and Length is NULL.
  @retval RETURN_WRITE_PROTECTED    Buffer and Length are NULL, but the LockBox has no
                                    LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE attribute.
  @retval RETURN_BUFFER_TOO_SMALL   the Length is too small to hold the confidential information.
  @retval RETURN_NOT_FOUND          the requested GUID not found.
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_ACCESS_DENIED      not allow to restore to the address
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
RestoreLockBox (
  IN  GUID       *Guid,
  IN  VOID       *Buffer  OPTIONAL,
  IN  OUT UINTN  *Length  OPTIONAL
  )
{
  EFI_STATUS                          Status;
  EFI_SMM_COMMUNICATION_PROTOCOL      *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_RESTORE  *LockBoxParameterRestore;
  EFI_SMM_COMMUNICATE_HEADER          *CommHeader;
  UINT8                               TempCommBuffer[sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE)];
  UINT8                               *CommBuffer;
  UINTN                               CommSize;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib RestoreLockBox - Enter\n"));

  //
  // Basic check
  //
  if ((Guid == NULL) ||
      ((Buffer == NULL) && (Length != NULL)) ||
      ((Buffer != NULL) && (Length == NULL)))
  {
    return EFI_INVALID_PARAMETER;
  }

  SmmCommunication = LockBoxGetSmmCommProtocol ();
  if (SmmCommunication == NULL) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommBuffer = LockBoxGetSmmCommBuffer ();
  if (CommBuffer == NULL) {
    CommBuffer = &TempCommBuffer[0];
  }

  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof (gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof (*LockBoxParameterRestore);

  LockBoxParameterRestore                      = (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterRestore->Header.Command      = EFI_SMM_LOCK_BOX_COMMAND_RESTORE;
  LockBoxParameterRestore->Header.DataLength   = sizeof (*LockBoxParameterRestore);
  LockBoxParameterRestore->Header.ReturnStatus = (UINT64)-1;
  CopyMem (&LockBoxParameterRestore->Guid, Guid, sizeof (*Guid));
  LockBoxParameterRestore->Buffer = (EFI_PHYSICAL_ADDRESS)(UINTN)Buffer;
  if (Length != NULL) {
    LockBoxParameterRestore->Length = (EFI_PHYSICAL_ADDRESS)*Length;
  } else {
    LockBoxParameterRestore->Length = 0;
  }

  //
  // Send command
  //
  CommSize = sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE);
  Status   = SmmCommunication->Communicate (
                                 SmmCommunication,
                                 &CommBuffer[0],
                                 &CommSize
                                 );
  ASSERT_EFI_ERROR (Status);

  if (Length != NULL) {
    *Length = (UINTN)LockBoxParameterRestore->Length;
  }

  Status = (EFI_STATUS)LockBoxParameterRestore->Header.ReturnStatus;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib RestoreLockBox - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}

/**
  This function will restore confidential information from all lockbox which have RestoreInPlace attribute.

  @retval RETURN_SUCCESS            the information is restored successfully.
  @retval RETURN_NOT_STARTED        it is too early to invoke this interface
  @retval RETURN_UNSUPPORTED        the service is not supported by implementaion.
**/
RETURN_STATUS
EFIAPI
RestoreAllLockBoxInPlace (
  VOID
  )
{
  EFI_STATUS                                       Status;
  EFI_SMM_COMMUNICATION_PROTOCOL                   *SmmCommunication;
  EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE  *LockBoxParameterRestoreAllInPlace;
  EFI_SMM_COMMUNICATE_HEADER                       *CommHeader;
  UINT8                                            TempCommBuffer[sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE)];
  UINT8                                            *CommBuffer;
  UINTN                                            CommSize;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib RestoreAllLockBoxInPlace - Enter\n"));

  SmmCommunication = LockBoxGetSmmCommProtocol ();
  if (SmmCommunication == NULL) {
    return EFI_NOT_STARTED;
  }

  //
  // Prepare parameter
  //
  CommBuffer = LockBoxGetSmmCommBuffer ();
  if (CommBuffer == NULL) {
    CommBuffer = &TempCommBuffer[0];
  }

  CommHeader = (EFI_SMM_COMMUNICATE_HEADER *)&CommBuffer[0];
  CopyMem (&CommHeader->HeaderGuid, &gEfiSmmLockBoxCommunicationGuid, sizeof (gEfiSmmLockBoxCommunicationGuid));
  CommHeader->MessageLength = sizeof (*LockBoxParameterRestoreAllInPlace);

  LockBoxParameterRestoreAllInPlace                      = (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE *)&CommBuffer[OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data)];
  LockBoxParameterRestoreAllInPlace->Header.Command      = EFI_SMM_LOCK_BOX_COMMAND_RESTORE_ALL_IN_PLACE;
  LockBoxParameterRestoreAllInPlace->Header.DataLength   = sizeof (*LockBoxParameterRestoreAllInPlace);
  LockBoxParameterRestoreAllInPlace->Header.ReturnStatus = (UINT64)-1;

  //
  // Send command
  //
  CommSize = sizeof (EFI_GUID) + sizeof (UINTN) + sizeof (EFI_SMM_LOCK_BOX_PARAMETER_RESTORE_ALL_IN_PLACE);
  Status   = SmmCommunication->Communicate (
                                 SmmCommunication,
                                 &CommBuffer[0],
                                 &CommSize
                                 );
  ASSERT_EFI_ERROR (Status);

  Status = (EFI_STATUS)LockBoxParameterRestoreAllInPlace->Header.ReturnStatus;

  DEBUG ((DEBUG_INFO, "SmmLockBoxDxeLib RestoreAllLockBoxInPlace - Exit (%r)\n", Status));

  //
  // Done
  //
  return Status;
}