This package provides cryptographic services that are used to implement firmware features such as UEFI Secure Boot, Measured Boot, firmware image authentication, and network boot. The cryptographic service implementation in this package uses services from the OpenSSL project.
EDK II firmware modules/libraries that requires the use of cryptographic services can either statically link all the required services, or the EDK II firmware module/library can use a dynamic Protocol/PPI service to call cryptographic services. The dynamic Protocol/PPI services are only available to PEIMs, DXE Drivers, UEFI Drivers, and SMM Drivers, and only if the cryptographic modules are included in the platform firmware image.
There may be firmware image size differences between the static and dynamic options. Some experimentation may be required to find the solution that provides the smallest overall firmware overhead.
The figure below shows an example of a firmware module that requires the use of cryptographic services. The cryptographic services are provided by three library classes called BaseCryptLib, TlsLib, and HashApiLib. These library classes are implemented using APIs from the OpenSSL project that are abstracted by the private library class called OpensslLib. The OpenSSL project implementation depends on C runtime library services. The EDK II project does not provide a full C runtime library for firmware components. Instead, the CryptoPkg includes the smallest subset of services required to build the OpenSSL project in the private library class called IntrinsicLib.
The CryptoPkg provides several instances of the BaseCryptLib and OpensslLib with different cryptographic service features and performance optimizations. The platform developer must select the correct instances based on cryptographic service requirements in each UEFI/PI firmware phase (SEC, PEI, DXE, UEFI, UEFI RT, and SMM), firmware image size requirements, and firmware boot performance requirements.
+================================+
| EDK II Firmware Module/Library |
+================================+
^ ^ ^
| | |
| | v
| | +============+
| | | HashApiLib |
| | +============+
| | ^
| | |
v v v
+========+ +====================+
| TlsLib | | BaseCryptLib |
+========+ +====================+
^ ^
| |
v v
+================================+
| OpensslLib (Private) |
+================================+
^
|
v
+================================+
| IntrinsicLib (Private) |
+================================+
The figure below shows the entire stack when dynamic linking is used with cryptographic services produced by the CryptoPei, CryptoDxe, or CryptoSmm module through a PPI/Protocol. This solution requires the CryptoPei, CryptoDxe, and CryptoSmm modules to be configured with the set of cryptographic services required by all the PEIMs, DXE Drivers, UEFI Drivers, and SMM Drivers. Dynamic linking is not available for SEC or UEFI RT modules.
The EDK II modules/libraries that require cryptographic services use the same BaseCryptLib/TlsLib/HashApiLib APIs. This means no source changes are required to use static linking or dynamic linking. It is a platform configuration option to select static linking or dynamic linking. This choice can be made globally, per firmware module type, or for individual modules.
+===================+ +===================+ +===================+
| EDK II PEI | | EDK II DXE/UEFI | | EDK II SMM |
| Module/Library | | Module/Library | | Module/Library |
+===================+ +===================+ +===================+
^ ^ ^ ^ ^ ^ ^ ^ ^
| | | | | | | | |
| | v | | v | | v
| | +==========+ | | +==========+ | | +==========+
| | |HashApiLib| | | |HashApiLib| | | |HashApiLib|
| | +==========+ | | +==========+ | | +==========+
| | ^ | | ^ | | ^
| | | | | | | | |
v v v v v v v v v
+===================+ +===================+ +===================+
|TlsLib|BaseCryptLib| |TlsLib|BaseCryptLib| |TlsLib|BaseCryptLib|
+-------------------+ +-------------------+ +-------------------+
| BaseCryptLib | | BaseCryptLib | | BaseCryptLib |
| OnPpiProtocol/ | | OnPpiProtocol/ | | OnPpiProtocol/ |
| PeiCryptLib.inf | | DxeCryptLib.inf | | SmmCryptLib.inf |
+===================+ +===================+ +===================+
^ ^ ^
||| (Dynamic) ||| (Dynamic) ||| (Dynamic)
v v v
+===================+ +===================+ +=====================+
| Crypto PPI | | Crypto Protocol | | Crypto SMM Protocol |
+-------------------| |-------------------| |---------------------|
| CryptoPei | | CryptoDxe | | CryptoSmm |
+===================+ +===================+ +=====================+
^ ^ ^ ^ ^ ^
| | | | | |
v | v | v |
+========+ | +========+ | +========+ |
| TlsLib | | | TlsLib | | | TlsLib | |
+========+ v +========+ v +========+ v
^ +==============+ ^ +==============+ ^ +==============+
| | BaseCryptLib | | | BaseCryptLib | | | BaseCryptLib |
| +==============+ | +==============+ | +==============+
| ^ | ^ | ^
| | | | | |
v v v v v v
+===================+ +===================+ +===================+
| OpensslLib | | OpensslLib | | OpensslLib |
+===================+ +===================+ +===================+
^ ^ ^
| | |
v v v
+===================+ +===================+ +===================+
| IntrinsicLib | | IntrinsicLib | | IntrinsicLib |
+===================+ +===================+ +===================+
The table below provides a summary of the supported cryptographic services. It indicates if the family or service is deprecated or recommended to not be used. It also shows which *CryptLib library instances support the family or service. If a cell is blank then the service or family is always disabled and the PcdCryptoServiceFamilyEnable setting for that family or service is ignored. If the cell is not blank, then the service or family is configurable using PcdCryptoServiceFamilyEnable as long as the correct OpensslLib or TlsLib is also configured.
| Key | Description |
|---|---|
| Family or service is always disabled. | |
| C | Configurable using PcdCryptoServiceFamilyEnable. |
| C-Tls | Configurable using PcdCryptoServiceFamilyEnable. Requires TlsLib.inf. |
| C-Full | Configurable using PcdCryptoServiceFamilyEnable. Requires OpensslLibFull*.inf. |
| Family/Service | Deprecated | Don't Use | SecCryptLib | PeiCryptLib | BaseCryptLib | SmmCryptLib | RuntimeCryptLib |
|---|---|---|---|---|---|---|---|
| HmacMd5 | Y | Y | |||||
| HmacSha1 | Y | Y | |||||
| HmacSha256 | N | N | C | C | C | C | |
| HmacSha384 | N | N | C | C | C | C | |
| Md4 | Y | Y | |||||
| Md5 | Y | Y | C | C | C | C | |
| Pkcs.Pkcs1v2Encrypt | N | N | C | C | |||
| Pkcs.Pkcs5HashPassword | N | N | C | C | |||
| Pkcs.Pkcs7Verify | N | N | C | C | C | C | |
| Pkcs.VerifyEKUsInPkcs7Signature | N | N | C | C | C | ||
| Pkcs.Pkcs7GetSigners | N | N | C | C | C | C | |
| Pkcs.Pkcs7FreeSigners | N | N | C | C | C | C | |
| Pkcs.Pkcs7Sign | N | N | C | ||||
| Pkcs.Pkcs7GetAttachedContent | N | N | C | C | C | ||
| Pkcs.Pkcs7GetCertificatesList | N | N | C | C | C | C | |
| Pkcs.AuthenticodeVerify | N | N | C | ||||
| Pkcs.ImageTimestampVerify | N | N | C | ||||
| Dh | N | N | C | ||||
| Random | N | N | C | C | C | ||
| Rsa.VerifyPkcs1 | Y | Y | |||||
| Rsa.New | N | N | C | C | C | C | |
| Rsa.Free | N | N | C | C | C | C | |
| Rsa.SetKey | N | N | C | C | C | C | |
| Rsa.GetKey | N | N | C | ||||
| Rsa.GenerateKey | N | N | C | ||||
| Rsa.CheckKey | N | N | C | ||||
| Rsa.Pkcs1Sign | N | N | C | ||||
| Rsa.Pkcs1Verify | N | N | C | C | C | C | |
| Sha1 | N | Y | C | C | C | C | |
| Sha256 | N | N | C | C | C | C | |
| Sha384 | N | N | C | C | C | C | C |
| Sha512 | N | N | C | C | C | C | C |
| X509 | N | N | C | C | C | ||
| Tdes | Y | Y | |||||
| Aes.GetContextSize | N | N | C | C | C | C | |
| Aes.Init | N | N | C | C | C | C | |
| Aes.EcbEncrypt | Y | Y | |||||
| Aes.EcbDecrypt | Y | Y | |||||
| Aes.CbcEncrypt | N | N | C | C | C | C | |
| Aes.CbcDecrypt | N | N | C | C | C | C | |
| Arc4 | Y | Y | |||||
| Sm3 | N | N | C | C | C | C | |
| Hkdf | N | N | C | C | C | C | |
| Tls | N | N | C-Tls | ||||
| TlsSet | N | N | C-Tls | ||||
| TlsGet | N | N | C-Tls | ||||
| RsaPss.Sign | N | N | C | ||||
| RsaPss.Verify | N | N | C | C | C | ||
| ParallelHash | N | N | C | ||||
| AeadAesGcm | N | N | C | ||||
| Bn | N | N | C | ||||
| Ec | N | N | C-Full |
Configuring the cryptographic services requires library mappings and PCD settings in a platform DSC file. This must be done for each of the firmware phases (SEC, PEI, DXE, UEFI, SMM, UEFI RT).
The following table can be used to help select the best OpensslLib instance for each phase. The Size column only shows the estimated size increase for a compressed IA32/X64 module that uses the cryptographic services with OpensslLib.inf as the baseline size. The actual size increase depends on the specific set of enabled cryptographic services. If ECC services are not required, then the size can be reduced by using OpensslLib.inf instead of OpensslLibFull.inf. Performance optimization requires a size increase.
| OpensslLib Instance | SSL | ECC | Perf Opt | CPU Arch | Size |
|---|---|---|---|---|---|
| OpensslLibCrypto.inf | N | N | N | All | +0K |
| OpensslLib.inf | Y | N | N | All | +0K |
| OpensslLibAccel.inf | Y | N | Y | IA32/X64 | +20K |
| OpensslLibFull.inf | Y | Y | N | All | +115K |
| OpensslLibFullAccel.inf | Y | Y | Y | IA32/X64 | +135K |
The SEC Phase only supports static linking of cryptographic services. The following library mappings are recommended for the SEC Phase. It uses the SEC specific version of the BaseCryptLib and the null version of the TlsLib because TLS services are not typically used in SEC.
[LibraryClasses.common.SEC] HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf BaseCryptLib|CryptoPkg/Library/BaseCryptLib/SecCryptLib.inf TlsLib|CryptoPkg/Library/TlsLibNull/TlsLibNull.inf OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
The PEI Phase supports either static or dynamic linking of cryptographic services. The following library mappings are recommended for the PEI Phase. It uses the PEI specific version of the BaseCryptLib and the null version of the TlsLib because TLS services are not typically used in PEI.
[LibraryClasses.common.PEIM] HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf BaseCryptLib|CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf TlsLib|CryptoPkg/Library/TlsLibNull/TlsLibNull.inf OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
If dynamic linking is used, then all PEIMs except CryptoPei use the following library mappings. The CryptoPei module uses the static linking settings.
[LibraryClasses.common.PEIM]
HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf
BaseCryptLib|CryptoPkg/Library/BaseCryptLibOnProtocolPpi/PeiCryptLib.inf
[Components]
CryptoPkg/Driver/CryptoPei.inf {
<LibraryClasses>
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
TlsLib|CryptoPkg/Library/TlsLibNull/TlsLibNull.inf
OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
}
The DXE/UEFI Phase supports either static or dynamic linking of cryptographic services. The following library mappings are recommended for the DXE/UEFI Phase. It uses the DXE specific version of the BaseCryptLib and the full version of the OpensslLib and TlsLib. If ECC services are not required then a smaller OpensslLib instance can be used.
[LibraryClasses.common.DXE_DRIVER, LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION] HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf TlsLib|CryptoPkg/Library/TlsLib/TlsLib.inf OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLibFull.inf IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
If dynamic linking is used, then all DXE Drivers except CryptoDxe use the following library mappings. The CryptoDxe module uses the static linking settings.
[LibraryClasses.common.DXE_DRIVER, LibraryClasses.common.UEFI_DRIVER, LibraryClasses.common.UEFI_APPLICATION]
HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf
BaseCryptLib|CryptoPkg/Library/BaseCryptLibOnProtocolPpi/DxeCryptLib.inf
[Components]
CryptoPkg/Driver/CryptoDxe.inf {
<LibraryClasses>
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
TlsLib|CryptoPkg/Library/TlsLib/TlsLib.inf
OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLibFull.inf
IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
}
The SMM Phase supports either static or dynamic linking of cryptographic services. The following library mappings are recommended for the SMM Phase. It uses the SMM specific version of the BaseCryptLib and the null version of the TlsLib.
[LibraryClasses.common.DXE_SMM_DRIVER] HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf BaseCryptLib|CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf TlsLib|CryptoPkg/Library/TlsLibNull/TlsLibNull.inf OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
If dynamic linking is used, then all SMM Drivers except CryptoSmm use the following library mappings. The CryptoDxe module uses the static linking settings.
[LibraryClasses.common.DXE_SMM_DRIVER]
HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf
BaseCryptLib|CryptoPkg/Library/BaseCryptLibOnProtocolPpi/SmmCryptLib.inf
[Components]
CryptoPkg/Driver/CryptoSmm.inf {
<LibraryClasses>
BaseCryptLib|CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf
TlsLib|CryptoPkg/Library/TlsLibNull/TlsLibNull.inf
OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
}
UEFI Runtime Drivers only support static linking of cryptographic services. The following library mappings are recommended for UEFI Runtime Drivers. They use the runtime specific version of the BaseCryptLib and the null version of the TlsLib because TLS services are not typically used at runtime.
[LibraryClasses.common.DXE_RUNTIME_DRIVER] HashApiLib|CryptoPkg/Library/BaseHashApiLib/BaseHashApiLib.inf BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf TlsLib|CryptoPkg/Library/TlsLibNull/TlsLibNull.inf OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
There are 2 PCD settings that are used to configure cryptographic services. PcdHashApiLibPolicy is used to configure the hash algorithm provided by the BaseHashApiLib library instance. PcdCryptoServiceFamilyEnable is used to configure the cryptographic services supported by the CryptoPei, CryptoDxe, and CryptoSmm modules.
gEfiCryptoPkgTokenSpaceGuid.PcdHashApiLibPolicy - This PCD indicates the HASH algorithm to use in the BaseHashApiLib to calculate hash of data. The default hashing algorithm for BaseHashApiLib is set to HASH_ALG_SHA256. | Setting | Algorithm | |------------|------------------| | 0x00000001 | HASH_ALG_SHA1 | | 0x00000002 | HASH_ALG_SHA256 | | 0x00000004 | HASH_ALG_SHA384 | | 0x00000008 | HASH_ALG_SHA512 | | 0x00000010 | HASH_ALG_SM3_256 |
gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable - Enable/Disable the families and individual services produced by the EDK II Crypto Protocols/PPIs. The default is all services disabled. This Structured PCD is associated with the PCD_CRYPTO_SERVICE_FAMILY_ENABLE structure that is defined in Include/Pcd/PcdCryptoServiceFamilyEnable.h.
There are three layers of priority that determine if a specific family or individual cryptographic service is actually enabled in the CryptoPei, CryptoDxe, and CryptoSmm modules.
PcdCryptoServiceFamilyEnable. This structured PCD is associated with the PCD_CRYPTO_SERVICE_FAMILY_ENABLE data structure that contains bit fields for each family of services. All of the families are disabled by default. An entire family of services can be enabled by setting the family field to the value PCD_CRYPTO_SERVICE_ENABLE_FAMILY. Individual services can be enabled by setting a single service name (bit) to TRUE. Settings listed later in the DSC file have priority over settings listed earlier in the DSC file, so it is valid for an entire family to be enabled first and then for a few individual services to be disabled by setting those service names to FALSE.gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.HmacSha256.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.HmacSha384.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha1.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha256.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha384.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha512.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sm3.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Aes.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.Pkcs1Verify | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.New | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.Free | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.SetKey | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.Pkcs5HashPassword | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Hkdf.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY
gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.HmacSha256.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.HmacSha384.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Hkdf.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.Pkcs1v2Encrypt | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.Pkcs5HashPassword | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.Pkcs7Verify | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.VerifyEKUsInPkcs7Signature | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.Pkcs7GetSigners | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.Pkcs7FreeSigners | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Pkcs.Services.AuthenticodeVerify | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Random.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.Pkcs1Verify | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.New | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.Free | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.SetKey | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Rsa.Services.GetPublicKeyFromX509 | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha1.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha256.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Sha256.Services.HashAll | FALSE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.X509.Services.GetSubjectName | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.X509.Services.GetCommonName | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.X509.Services.GetOrganizationName | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.X509.Services.GetTBSCert | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Tls.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.TlsSet.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.TlsGet.Family | PCD_CRYPTO_SERVICE_ENABLE_FAMILY gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Aes.Services.GetContextSize | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Aes.Services.Init | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Aes.Services.CbcEncrypt | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.Aes.Services.CbcDecrypt | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.AeadAesGcm.Services.Encrypt | TRUE gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.AeadAesGcm.Services.Decrypt | TRUE