/** @file
  Header file contains code for USB Ethernet Protocol
  definitions

  Copyright (c) 2023, American Megatrends International LLC. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent
**/

#ifndef USB_ETHERNET_PROTOCOL_H_
#define USB_ETHERNET_PROTOCOL_H_

#define EDKII_USB_ETHERNET_PROTOCOL_GUID \
    {0x8d8969cc, 0xfeb0, 0x4303, {0xb2, 0x1a, 0x1f, 0x11, 0x6f, 0x38, 0x56, 0x43}}

typedef struct _EDKII_USB_ETHERNET_PROTOCOL EDKII_USB_ETHERNET_PROTOCOL;

#define USB_CDC_CLASS          0x02
#define USB_CDC_ACM_SUBCLASS   0x02
#define USB_CDC_ECM_SUBCLASS   0x06
#define USB_CDC_NCM_SUBCLASS   0x0D
#define USB_CDC_DATA_CLASS     0x0A
#define USB_CDC_DATA_SUBCLASS  0x00
#define USB_NO_CLASS_PROTOCOL  0x00
#define USB_NCM_NTB_PROTOCOL   0x01
#define USB_VENDOR_PROTOCOL    0xFF

#define USB_MISC_CLASS               0xEF
#define USB_RNDIS_SUBCLASS           0x04
#define USB_RNDIS_ETHERNET_PROTOCOL  0x01

// Type Values for the DescriptorType Field
#define CS_INTERFACE  0x24
#define CS_ENDPOINT   0x25

// Descriptor SubType in Functional Descriptors
#define HEADER_FUN_DESCRIPTOR    0x00
#define UNION_FUN_DESCRIPTOR     0x06
#define ETHERNET_FUN_DESCRIPTOR  0x0F

#define MAX_LAN_INTERFACE  0x10

// Table 20: Class-Specific Notification Codes
#define USB_CDC_NETWORK_CONNECTION  0x00

// 6.3.1 NetworkConnection
#define NETWORK_CONNECTED   0x01
#define NETWORK_DISCONNECT  0x00

#define MAC_FILTERS_MASK  0x7FFF

// USB Header functional Descriptor
typedef struct {
  UINT8     FunctionLength;
  UINT8     DescriptorType;
  UINT8     DescriptorSubtype;
  UINT16    BcdCdc;
} USB_HEADER_FUN_DESCRIPTOR;

// USB Union Functional Descriptor
typedef struct {
  UINT8    FunctionLength;
  UINT8    DescriptorType;
  UINT8    DescriptorSubtype;
  UINT8    MasterInterface;
  UINT8    SlaveInterface;
} USB_UNION_FUN_DESCRIPTOR;

// USB Ethernet Functional Descriptor
typedef struct {
  UINT8     FunctionLength;
  UINT8     DescriptorType;
  UINT8     DescriptorSubtype;
  UINT8     MacAddress;
  UINT32    EthernetStatistics;
  UINT16    MaxSegmentSize;
  UINT16    NumberMcFilters;
  UINT8     NumberPowerFilters;
} USB_ETHERNET_FUN_DESCRIPTOR;

typedef struct {
  UINT32    UsBitRate;
  UINT32    DsBitRate;
} USB_CONNECT_SPEED_CHANGE;

// Request Type Codes for USB Ethernet
#define USB_ETHERNET_GET_REQ_TYPE  0xA1
#define USB_ETHERNET_SET_REQ_TYPE  0x21

// Class-Specific Request Codes for Ethernet subclass
// USB ECM 1.2 specification, Section 6.2
#define SET_ETH_MULTICAST_FILTERS_REQ                0x40
#define SET_ETH_POWER_MANAGEMENT_PATTERN_FILTER_REQ  0x41
#define GET_ETH_POWER_MANAGEMENT_PATTERN_FILTER_REQ  0x42
#define SET_ETH_PACKET_FILTER_REQ                    0x43
#define GET_ETH_STATISTIC_REQ                        0x44

// USB ECM command request length
#define USB_ETH_POWER_FILTER_LENGTH   2 // Section 6.2.3
#define USB_ETH_PACKET_FILTER_LENGTH  0 // Section 6.2.4
#define USB_ETH_STATISTIC             4 // Section 6.2.5

// USB Ethernet Packet Filter Bitmap
// USB ECM 1.2 specification, Section 6.2.4
#define USB_ETH_PACKET_TYPE_PROMISCUOUS    BIT0
#define USB_ETH_PACKET_TYPE_ALL_MULTICAST  BIT1
#define USB_ETH_PACKET_TYPE_DIRECTED       BIT2
#define USB_ETH_PACKET_TYPE_BROADCAST      BIT3
#define USB_ETH_PACKET_TYPE_MULTICAST      BIT4

// USB Ethernet Statistics Feature Selector Codes
// USB ECM 1.2 specification, Section 6.2.5
#define USB_ETH_XMIT_OK                 0x01
#define USB_ETH_RCV_OK                  0x02
#define USB_ETH_XMIT_ERROR              0x03
#define USB_ETH_RCV_ERROR               0x04
#define USB_ETH_RCV_NO_BUFFER           0x05
#define USB_ETH_DIRECTED_BYTES_XMIT     0x06
#define USB_ETH_DIRECTED_FRAMES_XMIT    0x07
#define USB_ETH_MULTICAST_BYTES_XMIT    0x08
#define USB_ETH_MULTICAST_FRAMES_XMIT   0x09
#define USB_ETH_BROADCAST_BYTES_XMIT    0x0A
#define USB_ETH_BROADCAST_FRAMES_XMIT   0x0B
#define USB_ETH_DIRECTED_BYTES_RCV      0x0C
#define USB_ETH_DIRECTED_FRAMES_RCV     0x0D
#define USB_ETH_MULTICAST_BYTES_RCV     0x0E
#define USB_ETH_MULTICAST_FRAMES_RCV    0x0F
#define USB_ETH_BROADCAST_BYTES_RCV     0x10
#define USB_ETH_BROADCAST_FRAMES_RCV    0x11
#define USB_ETH_RCV_CRC_ERROR           0x12
#define USB_ETH_TRANSMIT_QUEUE_LENGTH   0x13
#define USB_ETH_RCV_ERROR_ALIGNMENT     0x14
#define USB_ETH_XMIT_ONE_COLLISION      0x15
#define USB_ETH_XMIT_MORE_COLLISIONS    0x16
#define USB_ETH_XMIT_DEFERRED           0x17
#define USB_ETH_XMIT_MAX_COLLISIONS     0x18
#define USB_ETH_RCV_OVERRUN             0x19
#define USB_ETH_XMIT_UNDERRUN           0x1A
#define USB_ETH_XMIT_HEARTBEAT_FAILURE  0x1B
#define USB_ETH_XMIT_TIMES_CRS_LOST     0x1C
#define USB_ETH_XMIT_LATE_COLLISIONS    0x1D

// NIC Information
typedef struct {
  UINT32                         Signature;
  EDKII_USB_ETHERNET_PROTOCOL    *UsbEth;
  UINT16                         InterrupOpFlag;
  UINT64                         MappedAddr;
  PXE_MAC_ADDR                   McastList[MAX_MCAST_ADDRESS_CNT];
  UINT8                          McastCount;
  UINT64                         MediaHeader[MAX_XMIT_BUFFERS];
  UINT8                          TxBufferCount;
  UINT16                         State;
  BOOLEAN                        CanTransmit;
  UINT16                         ReceiveStatus;
  UINT8                          RxFilter;
  UINT32                         RxFrame;
  UINT32                         TxFrame;
  UINT16                         NetworkConnect;
  UINT8                          CableDetect;
  UINT16                         MaxSegmentSize;
  EFI_MAC_ADDRESS                MacAddr;
  PXE_CPB_START_31               PxeStart;
  PXE_CPB_INITIALIZE             PxeInit;
  UINT8                          PermNodeAddress[PXE_MAC_LENGTH];
  UINT8                          CurrentNodeAddress[PXE_MAC_LENGTH];
  UINT8                          BroadcastNodeAddress[PXE_MAC_LENGTH];
  EFI_USB_DEVICE_REQUEST         Request;
  EFI_EVENT                      RateLimiter;
  UINT32                         RateLimitingCredit;
  UINT32                         RateLimitingCreditCount;
  UINT32                         RateLimitingPollTimer;
  BOOLEAN                        RateLimitingEnable;
} NIC_DATA;

#define NIC_DATA_SIGNATURE  SIGNATURE_32('n', 'i', 'c', 'd')
#define NIC_DATA_FROM_EDKII_USB_ETHERNET_PROTOCOL(a)  CR (a, NIC_DATA, UsbEth, NIC_DATA_SIGNATURE)

/**
  This command is used to determine the operational state of the UNDI.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_GET_STATE)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to change the UNDI operational state from stopped to started.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_START)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to change the UNDI operational state from started to stopped.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_STOP)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to retrieve initialization information that is
  needed by drivers and applications to initialized UNDI.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_GET_INIT_INFO)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to retrieve configuration information about
  the NIC being controlled by the UNDI.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_GET_CONFIG_INFO)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command resets the network adapter and initializes UNDI using
  the parameters supplied in the CPB.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_INITIALIZE)(
  IN  PXE_CDB   *Cdb,
  IN  NIC_DATA  *Nic
  );

/**
  This command resets the network adapter and reinitializes the UNDI
  with the same parameters provided in the Initialize command.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_RESET)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  The Shutdown command resets the network adapter and leaves it in a
  safe state for another driver to initialize.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_SHUTDOWN)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  The Interrupt Enables command can be used to read and/or change
  the current external interrupt enable settings.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_INTERRUPT_ENABLE)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to read and change receive filters and,
  if supported, read and change the multicast MAC address filter list.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_RECEIVE_FILTER)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to get current station and broadcast MAC addresses
  and, if supported, to change the current station MAC address.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_STATION_ADDRESS)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to read and clear the NIC traffic statistics.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_STATISTICS)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  Translate a multicast IPv4 or IPv6 address to a multicast MAC address.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_MCAST_IPTOMAC)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to read and write (if supported by NIC H/W)
  nonvolatile storage on the NIC.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_NV_DATA)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command returns the current interrupt status and/or the
  transmitted buffer addresses and the current media status.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_GET_STATUS)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command is used to fill the media header(s) in transmit packet(s).

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_FILL_HEADER)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  The Transmit command is used to place a packet into the transmit queue.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_TRANSMIT)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  When the network adapter has received a frame, this command is used
  to copy the frame into driver/application storage.

  @param[in]  Cdb  A pointer to the command descriptor block.
  @param[in]  Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_UNDI_RECEIVE)(
  IN  PXE_CDB     *Cdb,
  IN  NIC_DATA    *Nic
  );

/**
  This command resets the network adapter and initializes UNDI using
  the parameters supplied in the CPB.

  @param[in]      Cdb  A pointer to the command descriptor block.
  @param[in, out] Nic  A pointer to the Network interface controller data.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_INITIALIZE)(
  IN      PXE_CDB   *Cdb,
  IN OUT  NIC_DATA  *Nic
  );

/**
  This command is used to read and clear the NIC traffic statistics.

  @param[in]  Nic     A pointer to the Network interface controller data.
  @param[in]  DbAddr  Data Block Address.
  @param[in]  DbSize  Data Block Size.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_STATISTICS)(
  IN  NIC_DATA    *Nic,
  IN  UINT64      DbAddr,
  IN  UINT16      DbSize
  );

/**
  This function is used to manage a USB device with the bulk transfer pipe. The endpoint is Bulk in.

  @param[in]      Cdb           A pointer to the command descriptor block.
  @param[in]      This          A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in, out] Packet        A pointer to the buffer of data that will be transmitted to USB
                                device or received from USB device.
  @param[in, out] PacketLength  A pointer to the PacketLength.

  @retval EFI_SUCCESS           The bulk transfer has been successfully executed.
  @retval EFI_DEVICE_ERROR      The transfer failed. The transfer status is returned in status.
  @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
  @retval EFI_OUT_OF_RESOURCES  The request could not be submitted due to a lack of resources.
  @retval EFI_TIMEOUT           The control transfer fails due to timeout.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_RECEIVE)(
  IN     PXE_CDB               *Cdb,
  IN     EDKII_USB_ETHERNET_PROTOCOL *This,
  IN OUT VOID                  *Packet,
  IN OUT UINTN                 *PacketLength
  );

/**
  This function is used to manage a USB device with the bulk transfer pipe. The endpoint is Bulk out.

  @param[in]      Cdb           A pointer to the command descriptor block.
  @param[in]      This          A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in, out] Packet        A pointer to the buffer of data that will be transmitted to USB
                                device or received from USB device.
  @param[in, out] PacketLength  A pointer to the PacketLength.

  @retval EFI_SUCCESS           The bulk transfer has been successfully executed.
  @retval EFI_DEVICE_ERROR      The transfer failed. The transfer status is returned in status.
  @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
  @retval EFI_OUT_OF_RESOURCES  The request could not be submitted due to a lack of resources.
  @retval EFI_TIMEOUT           The control transfer fails due to timeout.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_TRANSMIT)(
  IN     PXE_CDB               *Cdb,
  IN     EDKII_USB_ETHERNET_PROTOCOL *This,
  IN OUT VOID                  *Packet,
  IN OUT UINTN                 *PacketLength
  );

/**
  This function is used to manage a USB device with an interrupt transfer pipe.

  @param[in]  This              A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in]  IsNewTransfer     If TRUE, a new transfer will be submitted to USB controller. If
                                FALSE, the interrupt transfer is deleted from the device's interrupt
                                transfer queue.
  @param[in]  PollingInterval   Indicates the periodic rate, in milliseconds, that the transfer is to be
                                executed.This parameter is required when IsNewTransfer is TRUE. The
                                value must be between 1 to 255, otherwise EFI_INVALID_PARAMETER is returned.
                                The units are in milliseconds.
  @param[in]  Request           A pointer to the EFI_USB_DEVICE_REQUEST data.

  @retval EFI_SUCCESS           The asynchronous USB transfer request transfer has been successfully executed.
  @retval EFI_DEVICE_ERROR      The asynchronous USB transfer request failed.

**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_INTERRUPT)(
  IN EDKII_USB_ETHERNET_PROTOCOL   *This,
  IN BOOLEAN                 IsNewTransfer,
  IN UINTN                   PollingInterval,
  IN EFI_USB_DEVICE_REQUEST  *Request
  );

/**
  Retrieves the USB Ethernet Mac Address.

  @param[in]  This          A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[out] MacAddress    A pointer to the caller allocated USB Ethernet Mac Address.

  @retval EFI_SUCCESS           The USB Header Functional descriptor was retrieved successfully.
  @retval EFI_INVALID_PARAMETER UsbHeaderFunDescriptor is NULL.
  @retval EFI_NOT_FOUND         The USB Header Functional descriptor was not found.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_GET_ETH_MAC_ADDRESS)(
  IN  EDKII_USB_ETHERNET_PROTOCOL *This,
  OUT EFI_MAC_ADDRESS       *MacAddress
  );

/**
  Retrieves the USB Ethernet Bulk transfer data size.

  @param[in]  This          A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[out] BulkSize      A pointer to the Bulk transfer data size.

  @retval EFI_SUCCESS           The USB Header Functional descriptor was retrieved successfully.
  @retval EFI_INVALID_PARAMETER UsbHeaderFunDescriptor is NULL.
  @retval EFI_NOT_FOUND         The USB Header Functional descriptor was not found.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETH_MAX_BULK_SIZE)(
  IN  EDKII_USB_ETHERNET_PROTOCOL *This,
  OUT UINTN                 *BulkSize
  );

/**
  Retrieves the USB Header functional Descriptor.

  @param[in]  This                   A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[out] UsbHeaderFunDescriptor A pointer to the caller allocated USB Header Functional Descriptor.

  @retval EFI_SUCCESS           The USB Header Functional descriptor was retrieved successfully.
  @retval EFI_INVALID_PARAMETER UsbHeaderFunDescriptor is NULL.
  @retval EFI_NOT_FOUND         The USB Header Functional descriptor was not found.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_HEADER_FUNCTIONAL_DESCRIPTOR)(
  IN EDKII_USB_ETHERNET_PROTOCOL      *This,
  OUT USB_HEADER_FUN_DESCRIPTOR *UsbHeaderFunDescriptor
  );

/**
  Retrieves the USB Union functional Descriptor.

  @param[in]  This                   A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[out] UsbUnionFunDescriptor  A pointer to the caller allocated USB Union Functional Descriptor.

  @retval EFI_SUCCESS           The USB Union Functional descriptor was retrieved successfully.
  @retval EFI_INVALID_PARAMETER UsbUnionFunDescriptor is NULL.
  @retval EFI_NOT_FOUND         The USB Union Functional descriptor was not found.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_UNION_FUNCTIONAL_DESCRIPTOR)(
  IN EDKII_USB_ETHERNET_PROTOCOL     *This,
  OUT USB_UNION_FUN_DESCRIPTOR *UsbUnionFunDescriptor
  );

/**
  Retrieves the USB Ethernet functional Descriptor.

  @param[in]  This                   A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[out] UsbEthFunDescriptor    A pointer to the caller allocated USB Ethernet Functional Descriptor.

  @retval EFI_SUCCESS           The USB Ethernet Functional descriptor was retrieved successfully.
  @retval EFI_INVALID_PARAMETER UsbEthFunDescriptor is NULL.
  @retval EFI_NOT_FOUND         The USB Ethernet Functional descriptor was not found.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_FUNCTIONAL_DESCRIPTOR)(
  IN EDKII_USB_ETHERNET_PROTOCOL        *This,
  OUT USB_ETHERNET_FUN_DESCRIPTOR *UsbEthFunDescriptor
  );

/**
  This request sets the Ethernet device multicast filters as specified in the
  sequential list of 48 bit Ethernet multicast addresses.

  @param[in]  This                   A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in]  Value                  Number of filters.
  @param[in]  McastAddr              A pointer to the value of the multicast addresses.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_SET_ETH_MULTICAST_FILTERS)(
  IN EDKII_USB_ETHERNET_PROTOCOL *This,
  IN UINT16                Value,
  IN VOID                  *McastAddr
  );

/**
  This request sets up the specified Ethernet power management pattern filter as
  described in the data structure.

  @param[in]  This                   A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in]  Value                  Number of filters.
  @param[in]  Length                 Size of the power management pattern filter data.
  @param[in]  PatternFilter          A pointer to the power management pattern filter structure.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_SET_ETH_POWER_MANAGE_PATTERN_FILTER)(
  IN EDKII_USB_ETHERNET_PROTOCOL *This,
  IN UINT16                Value,
  IN UINT16                Length,
  IN VOID                  *PatternFilter
  );

/**
  This request retrieves the status of the specified Ethernet power management
  pattern filter from the device.

  @param[in]  This                   A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in]  Value                  The filter number.
  @param[out] PatternActive          A pointer to the pattern active boolean.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_GET_ETH_POWER_MANAGE_PATTERN_FILTER)(
  IN   EDKII_USB_ETHERNET_PROTOCOL *This,
  IN   UINT16                Value,
  OUT  BOOLEAN               *PatternActive
  );

/**
  This request is used to configure device Ethernet packet filter settings.

  @param[in]  This              A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in]  Value             Packet Filter Bitmap.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_SET_ETH_PACKET_FILTER)(
  IN EDKII_USB_ETHERNET_PROTOCOL *This,
  IN UINT16                Value
  );

/**
  This request is used to retrieve a statistic based on the feature selector.

  @param[in]  This                  A pointer to the EDKII_USB_ETHERNET_PROTOCOL instance.
  @param[in]  FeatureSelector       Value of the feature selector.
  @param[out] Statistic             A pointer to the 32 bit unsigned integer.

  @retval EFI_SUCCESS           The request executed successfully.
  @retval EFI_TIMEOUT           A timeout occurred executing the request.
  @retval EFI_DEVICE_ERROR      The request failed due to a device error.
  @retval EFI_INVALID_PARAMETER One of the parameters has an invalid value.
  @retval EFI_UNSUPPORTED       Not supported.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_USB_ETHERNET_GET_ETH_STATISTIC)(
  IN  EDKII_USB_ETHERNET_PROTOCOL  *This,
  IN  UINT16                 FeatureSelector,
  OUT VOID                   *Statistic
  );

typedef struct {
  EDKII_USB_ETHERNET_UNDI_GET_STATE           UsbEthUndiGetState;
  EDKII_USB_ETHERNET_UNDI_START               UsbEthUndiStart;
  EDKII_USB_ETHERNET_UNDI_STOP                UsbEthUndiStop;
  EDKII_USB_ETHERNET_UNDI_GET_INIT_INFO       UsbEthUndiGetInitInfo;
  EDKII_USB_ETHERNET_UNDI_GET_CONFIG_INFO     UsbEthUndiGetConfigInfo;
  EDKII_USB_ETHERNET_UNDI_INITIALIZE          UsbEthUndiInitialize;
  EDKII_USB_ETHERNET_UNDI_RESET               UsbEthUndiReset;
  EDKII_USB_ETHERNET_UNDI_SHUTDOWN            UsbEthUndiShutdown;
  EDKII_USB_ETHERNET_UNDI_INTERRUPT_ENABLE    UsbEthUndiInterruptEnable;
  EDKII_USB_ETHERNET_UNDI_RECEIVE_FILTER      UsbEthUndiReceiveFilter;
  EDKII_USB_ETHERNET_UNDI_STATION_ADDRESS     UsbEthUndiStationAddress;
  EDKII_USB_ETHERNET_UNDI_STATISTICS          UsbEthUndiStatistics;
  EDKII_USB_ETHERNET_UNDI_MCAST_IPTOMAC       UsbEthUndiMcastIp2Mac;
  EDKII_USB_ETHERNET_UNDI_NV_DATA             UsbEthUndiNvData;
  EDKII_USB_ETHERNET_UNDI_GET_STATUS          UsbEthUndiGetStatus;
  EDKII_USB_ETHERNET_UNDI_FILL_HEADER         UsbEthUndiFillHeader;
  EDKII_USB_ETHERNET_UNDI_TRANSMIT            UsbEthUndiTransmit;
  EDKII_USB_ETHERNET_UNDI_RECEIVE             UsbEthUndiReceive;
} EDKII_USB_ETHERNET_UNDI;

// The EDKII_USB_ETHERNET_PROTOCOL provides some basic USB Ethernet device relevant
// descriptor and specific requests.
struct _EDKII_USB_ETHERNET_PROTOCOL {
  EDKII_USB_ETHERNET_UNDI                                   UsbEthUndi;
  // for calling the UNDI child functions
  EDKII_USB_ETHERNET_INITIALIZE                             UsbEthInitialize;
  EDKII_USB_ETHERNET_STATISTICS                             UsbEthStatistics;
  EDKII_USB_ETHERNET_RECEIVE                                UsbEthReceive;
  EDKII_USB_ETHERNET_TRANSMIT                               UsbEthTransmit;
  EDKII_USB_ETHERNET_INTERRUPT                              UsbEthInterrupt;
  EDKII_USB_GET_ETH_MAC_ADDRESS                             UsbEthMacAddress;
  EDKII_USB_ETH_MAX_BULK_SIZE                               UsbEthMaxBulkSize;
  EDKII_USB_HEADER_FUNCTIONAL_DESCRIPTOR                    UsbHeaderFunDescriptor;
  EDKII_USB_UNION_FUNCTIONAL_DESCRIPTOR                     UsbUnionFunDescriptor;
  EDKII_USB_ETHERNET_FUNCTIONAL_DESCRIPTOR                  UsbEthFunDescriptor;
  EDKII_USB_ETHERNET_SET_ETH_MULTICAST_FILTERS              SetUsbEthMcastFilter;
  EDKII_USB_ETHERNET_SET_ETH_POWER_MANAGE_PATTERN_FILTER    SetUsbEthPowerPatternFilter;
  EDKII_USB_ETHERNET_GET_ETH_POWER_MANAGE_PATTERN_FILTER    GetUsbEthPowerPatternFilter;
  EDKII_USB_ETHERNET_SET_ETH_PACKET_FILTER                  SetUsbEthPacketFilter;
  EDKII_USB_ETHERNET_GET_ETH_STATISTIC                      GetUsbEthStatistic;
};

extern EFI_GUID  gEdkIIUsbEthProtocolGuid;

#endif