/** @file

  Copyright (c) 2014 - 2021, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "UfsBlockIoPei.h"

//
// Template for UFS HC Peim Private Data.
//
UFS_PEIM_HC_PRIVATE_DATA  gUfsHcPeimTemplate = {
  UFS_PEIM_HC_SIG,                // Signature
  NULL,                           // Controller
  NULL,                           // Pool
  {                               // BlkIoPpi
    UfsBlockIoPeimGetDeviceNo,
    UfsBlockIoPeimGetMediaInfo,
    UfsBlockIoPeimReadBlocks
  },
  {                               // BlkIo2Ppi
    EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION,
    UfsBlockIoPeimGetDeviceNo2,
    UfsBlockIoPeimGetMediaInfo2,
    UfsBlockIoPeimReadBlocks2
  },
  {                               // BlkIoPpiList
    EFI_PEI_PPI_DESCRIPTOR_PPI,
    &gEfiPeiVirtualBlockIoPpiGuid,
    NULL
  },
  {                               // BlkIo2PpiList
    EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST,
    &gEfiPeiVirtualBlockIo2PpiGuid,
    NULL
  },
  {                               // Media
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    },
    {
      MSG_UFS_DP,
      FALSE,
      TRUE,
      FALSE,
      0x1000,
      0
    }
  },
  {                               // EndOfPeiNotifyList
    (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
    &gEfiEndOfPeiSignalPpiGuid,
    UfsEndOfPei
  },
  0,                              // UfsHcBase
  0,                              // Capabilities
  0,                              // TaskTag
  0,                              // UtpTrlBase
  0,                              // Nutrs
  NULL,                           // TrlMapping
  0,                              // UtpTmrlBase
  0,                              // Nutmrs
  NULL,                           // TmrlMapping
  {                               // Luns
    {
      UFS_LUN_0,                      // Ufs Common Lun 0
      UFS_LUN_1,                      // Ufs Common Lun 1
      UFS_LUN_2,                      // Ufs Common Lun 2
      UFS_LUN_3,                      // Ufs Common Lun 3
      UFS_LUN_4,                      // Ufs Common Lun 4
      UFS_LUN_5,                      // Ufs Common Lun 5
      UFS_LUN_6,                      // Ufs Common Lun 6
      UFS_LUN_7,                      // Ufs Common Lun 7
    },
    0x0000,                           // By default exposing all Luns.
    0x0
  }
};

/**
  Execute TEST UNITY READY SCSI command on a specific UFS device.

  @param[in]  Private              A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
  @param[in]  Lun                  The lun on which the SCSI cmd executed.
  @param[out] SenseData            A pointer to output sense data.
  @param[out] SenseDataLength      The length of output sense data.

  @retval EFI_SUCCESS              The command executed successfully.
  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send SCSI Request Packet.
  @retval EFI_TIMEOUT              A timeout occurred while waiting for the SCSI Request Packet to execute.

**/
EFI_STATUS
UfsPeimTestUnitReady (
  IN     UFS_PEIM_HC_PRIVATE_DATA  *Private,
  IN     UINTN                     Lun,
  OUT VOID                         *SenseData   OPTIONAL,
  OUT UINT8                        *SenseDataLength
  )
{
  UFS_SCSI_REQUEST_PACKET  Packet;
  UINT8                    Cdb[UFS_SCSI_OP_LENGTH_SIX];
  EFI_STATUS               Status;

  ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
  ZeroMem (Cdb, sizeof (Cdb));

  Cdb[0] = EFI_SCSI_OP_TEST_UNIT_READY;

  Packet.Timeout         = UFS_TIMEOUT;
  Packet.Cdb             = Cdb;
  Packet.CdbLength       = sizeof (Cdb);
  Packet.DataDirection   = UfsNoData;
  Packet.SenseData       = SenseData;
  Packet.SenseDataLength = *SenseDataLength;

  Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);

  if (*SenseDataLength != 0) {
    *SenseDataLength = Packet.SenseDataLength;
  }

  return Status;
}

/**
  Execute READ CAPACITY(10) SCSI command on a specific UFS device.

  @param[in]  Private              A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
  @param[in]  Lun                  The lun on which the SCSI cmd executed.
  @param[out] DataBuffer           A pointer to READ_CAPACITY data buffer.
  @param[out] DataLength           The length of output READ_CAPACITY data.
  @param[out] SenseData            A pointer to output sense data.
  @param[out] SenseDataLength      The length of output sense data.

  @retval EFI_SUCCESS              The command executed successfully.
  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send SCSI Request Packet.
  @retval EFI_TIMEOUT              A timeout occurred while waiting for the SCSI Request Packet to execute.

**/
EFI_STATUS
UfsPeimReadCapacity (
  IN     UFS_PEIM_HC_PRIVATE_DATA  *Private,
  IN     UINTN                     Lun,
  OUT VOID                         *DataBuffer,
  OUT UINT32                       *DataLength,
  OUT VOID                         *SenseData   OPTIONAL,
  OUT UINT8                        *SenseDataLength
  )
{
  UFS_SCSI_REQUEST_PACKET  Packet;
  UINT8                    Cdb[UFS_SCSI_OP_LENGTH_TEN];
  EFI_STATUS               Status;

  ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
  ZeroMem (Cdb, sizeof (Cdb));

  Cdb[0] = EFI_SCSI_OP_READ_CAPACITY;

  Packet.Timeout          = UFS_TIMEOUT;
  Packet.Cdb              = Cdb;
  Packet.CdbLength        = sizeof (Cdb);
  Packet.InDataBuffer     = DataBuffer;
  Packet.InTransferLength = *DataLength;
  Packet.DataDirection    = UfsDataIn;
  Packet.SenseData        = SenseData;
  Packet.SenseDataLength  = *SenseDataLength;

  Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);

  if (*SenseDataLength != 0) {
    *SenseDataLength = Packet.SenseDataLength;
  }

  if (!EFI_ERROR (Status)) {
    *DataLength = Packet.InTransferLength;
  }

  return Status;
}

/**
  Execute READ CAPACITY(16) SCSI command on a specific UFS device.

  @param[in]  Private              A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
  @param[in]  Lun                  The lun on which the SCSI cmd executed.
  @param[out] DataBuffer           A pointer to READ_CAPACITY data buffer.
  @param[out] DataLength           The length of output READ_CAPACITY data.
  @param[out] SenseData            A pointer to output sense data.
  @param[out] SenseDataLength      The length of output sense data.

  @retval EFI_SUCCESS              The command executed successfully.
  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send SCSI Request Packet.
  @retval EFI_TIMEOUT              A timeout occurred while waiting for the SCSI Request Packet to execute.

**/
EFI_STATUS
UfsPeimReadCapacity16 (
  IN     UFS_PEIM_HC_PRIVATE_DATA  *Private,
  IN     UINTN                     Lun,
  OUT VOID                         *DataBuffer,
  OUT UINT32                       *DataLength,
  OUT VOID                         *SenseData   OPTIONAL,
  OUT UINT8                        *SenseDataLength
  )
{
  UFS_SCSI_REQUEST_PACKET  Packet;
  UINT8                    Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
  EFI_STATUS               Status;

  ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
  ZeroMem (Cdb, sizeof (Cdb));

  Cdb[0]  = EFI_SCSI_OP_READ_CAPACITY16;
  Cdb[1]  = 0x10;          // Service Action should be 0x10 for UFS device.
  Cdb[13] = 0x20;          // The maximum number of bytes for returned data.

  Packet.Timeout          = UFS_TIMEOUT;
  Packet.Cdb              = Cdb;
  Packet.CdbLength        = sizeof (Cdb);
  Packet.InDataBuffer     = DataBuffer;
  Packet.InTransferLength = *DataLength;
  Packet.DataDirection    = UfsDataIn;
  Packet.SenseData        = SenseData;
  Packet.SenseDataLength  = *SenseDataLength;

  Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);

  if (*SenseDataLength != 0) {
    *SenseDataLength = Packet.SenseDataLength;
  }

  if (!EFI_ERROR (Status)) {
    *DataLength = Packet.InTransferLength;
  }

  return Status;
}

/**
  Execute READ (10) SCSI command on a specific UFS device.

  @param[in]  Private              A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
  @param[in]  Lun                  The lun on which the SCSI cmd executed.
  @param[in]  StartLba             The start LBA.
  @param[in]  SectorNum            The sector number to be read.
  @param[out] DataBuffer           A pointer to data buffer.
  @param[out] DataLength           The length of output data.
  @param[out] SenseData            A pointer to output sense data.
  @param[out] SenseDataLength      The length of output sense data.

  @retval EFI_SUCCESS              The command executed successfully.
  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send SCSI Request Packet.
  @retval EFI_TIMEOUT              A timeout occurred while waiting for the SCSI Request Packet to execute.

**/
EFI_STATUS
UfsPeimRead10 (
  IN     UFS_PEIM_HC_PRIVATE_DATA  *Private,
  IN     UINTN                     Lun,
  IN     UINTN                     StartLba,
  IN     UINT32                    SectorNum,
  OUT VOID                         *DataBuffer,
  OUT UINT32                       *DataLength,
  OUT VOID                         *SenseData   OPTIONAL,
  OUT UINT8                        *SenseDataLength
  )
{
  UFS_SCSI_REQUEST_PACKET  Packet;
  UINT8                    Cdb[UFS_SCSI_OP_LENGTH_TEN];
  EFI_STATUS               Status;

  ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
  ZeroMem (Cdb, sizeof (Cdb));

  Cdb[0] = EFI_SCSI_OP_READ10;
  WriteUnaligned32 ((UINT32 *)&Cdb[2], SwapBytes32 ((UINT32)StartLba));
  WriteUnaligned16 ((UINT16 *)&Cdb[7], SwapBytes16 ((UINT16)SectorNum));

  Packet.Timeout          = UFS_TIMEOUT;
  Packet.Cdb              = Cdb;
  Packet.CdbLength        = sizeof (Cdb);
  Packet.InDataBuffer     = DataBuffer;
  Packet.InTransferLength = *DataLength;
  Packet.DataDirection    = UfsDataIn;
  Packet.SenseData        = SenseData;
  Packet.SenseDataLength  = *SenseDataLength;

  Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);

  if (*SenseDataLength != 0) {
    *SenseDataLength = Packet.SenseDataLength;
  }

  if (!EFI_ERROR (Status)) {
    *DataLength = Packet.InTransferLength;
  }

  return Status;
}

/**
  Execute READ (16) SCSI command on a specific UFS device.

  @param[in]  Private              A pointer to UFS_PEIM_HC_PRIVATE_DATA data structure.
  @param[in]  Lun                  The lun on which the SCSI cmd executed.
  @param[in]  StartLba             The start LBA.
  @param[in]  SectorNum            The sector number to be read.
  @param[out] DataBuffer           A pointer to data buffer.
  @param[out] DataLength           The length of output data.
  @param[out] SenseData            A pointer to output sense data.
  @param[out] SenseDataLength      The length of output sense data.

  @retval EFI_SUCCESS              The command executed successfully.
  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send SCSI Request Packet.
  @retval EFI_TIMEOUT              A timeout occurred while waiting for the SCSI Request Packet to execute.

**/
EFI_STATUS
UfsPeimRead16 (
  IN     UFS_PEIM_HC_PRIVATE_DATA  *Private,
  IN     UINTN                     Lun,
  IN     UINTN                     StartLba,
  IN     UINT32                    SectorNum,
  OUT VOID                         *DataBuffer,
  OUT UINT32                       *DataLength,
  OUT VOID                         *SenseData   OPTIONAL,
  OUT UINT8                        *SenseDataLength
  )
{
  UFS_SCSI_REQUEST_PACKET  Packet;
  UINT8                    Cdb[UFS_SCSI_OP_LENGTH_SIXTEEN];
  EFI_STATUS               Status;

  ZeroMem (&Packet, sizeof (UFS_SCSI_REQUEST_PACKET));
  ZeroMem (Cdb, sizeof (Cdb));

  Cdb[0] = EFI_SCSI_OP_READ16;
  WriteUnaligned64 ((UINT64 *)&Cdb[2], SwapBytes64 (StartLba));
  WriteUnaligned32 ((UINT32 *)&Cdb[10], SwapBytes32 (SectorNum));

  Packet.Timeout          = UFS_TIMEOUT;
  Packet.Cdb              = Cdb;
  Packet.CdbLength        = sizeof (Cdb);
  Packet.InDataBuffer     = DataBuffer;
  Packet.InTransferLength = *DataLength;
  Packet.DataDirection    = UfsDataIn;
  Packet.SenseData        = SenseData;
  Packet.SenseDataLength  = *SenseDataLength;

  Status = UfsExecScsiCmds (Private, (UINT8)Lun, &Packet);

  if (*SenseDataLength != 0) {
    *SenseDataLength = Packet.SenseDataLength;
  }

  if (!EFI_ERROR (Status)) {
    *DataLength = Packet.InTransferLength;
  }

  return Status;
}

/**
  Parsing Sense Keys from sense data.

  @param  Media              The pointer of EFI_PEI_BLOCK_IO_MEDIA
  @param  SenseData          The pointer of EFI_SCSI_SENSE_DATA
  @param  NeedRetry          The pointer of action which indicates what is need to retry

  @retval EFI_DEVICE_ERROR   Indicates that error occurs
  @retval EFI_SUCCESS        Successfully to complete the parsing

**/
EFI_STATUS
UfsPeimParsingSenseKeys (
  IN     EFI_PEI_BLOCK_IO2_MEDIA  *Media,
  IN     EFI_SCSI_SENSE_DATA      *SenseData,
  OUT BOOLEAN                     *NeedRetry
  )
{
  if ((SenseData->Sense_Key == EFI_SCSI_SK_NOT_READY) &&
      (SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_NO_MEDIA))
  {
    Media->MediaPresent = FALSE;
    *NeedRetry          = FALSE;
    DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Is No Media\n"));
    return EFI_DEVICE_ERROR;
  }

  if ((SenseData->Sense_Key == EFI_SCSI_SK_UNIT_ATTENTION) &&
      (SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_MEDIA_CHANGE))
  {
    *NeedRetry = TRUE;
    DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Is Media Change\n"));
    return EFI_SUCCESS;
  }

  if ((SenseData->Sense_Key == EFI_SCSI_SK_UNIT_ATTENTION) &&
      (SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_RESET))
  {
    *NeedRetry = TRUE;
    DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Was Reset Before\n"));
    return EFI_SUCCESS;
  }

  if ((SenseData->Sense_Key == EFI_SCSI_SK_MEDIUM_ERROR) ||
      ((SenseData->Sense_Key == EFI_SCSI_SK_NOT_READY) &&
       (SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_MEDIA_UPSIDE_DOWN)))
  {
    *NeedRetry = FALSE;
    DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Media Error\n"));
    return EFI_DEVICE_ERROR;
  }

  if (SenseData->Sense_Key == EFI_SCSI_SK_HARDWARE_ERROR) {
    *NeedRetry = FALSE;
    DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Hardware Error\n"));
    return EFI_DEVICE_ERROR;
  }

  if ((SenseData->Sense_Key == EFI_SCSI_SK_NOT_READY) &&
      (SenseData->Addnl_Sense_Code == EFI_SCSI_ASC_NOT_READY) &&
      (SenseData->Addnl_Sense_Code_Qualifier == EFI_SCSI_ASCQ_IN_PROGRESS))
  {
    *NeedRetry = TRUE;
    DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Was Reset Before\n"));
    return EFI_SUCCESS;
  }

  *NeedRetry = FALSE;
  DEBUG ((DEBUG_VERBOSE, "UfsBlockIoPei: Sense Key = 0x%x ASC = 0x%x!\n", SenseData->Sense_Key, SenseData->Addnl_Sense_Code));
  return EFI_DEVICE_ERROR;
}

/**
  Gets the count of block I/O devices that one specific block driver detects.

  This function is used for getting the count of block I/O devices that one
  specific block driver detects.  To the PEI ATAPI driver, it returns the number
  of all the detected ATAPI devices it detects during the enumeration process.
  To the PEI legacy floppy driver, it returns the number of all the legacy
  devices it finds during its enumeration process. If no device is detected,
  then the function will return zero.

  @param[in]  PeiServices          General-purpose services that are available
                                   to every PEIM.
  @param[in]  This                 Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI
                                   instance.
  @param[out] NumberBlockDevices   The number of block I/O devices discovered.

  @retval     EFI_SUCCESS          The operation performed successfully.

**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetDeviceNo (
  IN  EFI_PEI_SERVICES               **PeiServices,
  IN  EFI_PEI_RECOVERY_BLOCK_IO_PPI  *This,
  OUT UINTN                          *NumberBlockDevices
  )
{
  //
  // For Ufs device, it has up to 8 normal Luns plus some well-known Luns.
  // At PEI phase, we will only expose normal Luns to user.
  // For those disabled Lun, when user try to access it, the operation would fail.
  //
  *NumberBlockDevices = UFS_PEIM_MAX_LUNS;
  return EFI_SUCCESS;
}

/**
  Gets a block device's media information.

  This function will provide the caller with the specified block device's media
  information. If the media changes, calling this function will update the media
  information accordingly.

  @param[in]  PeiServices   General-purpose services that are available to every
                            PEIM
  @param[in]  This          Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
  @param[in]  DeviceIndex   Specifies the block device to which the function wants
                            to talk. Because the driver that implements Block I/O
                            PPIs will manage multiple block devices, the PPIs that
                            want to talk to a single device must specify the
                            device index that was assigned during the enumeration
                            process. This index is a number from one to
                            NumberBlockDevices.
  @param[out] MediaInfo     The media information of the specified block media.
                            The caller is responsible for the ownership of this
                            data structure.

  @par Note:
      The MediaInfo structure describes an enumeration of possible block device
      types.  This enumeration exists because no device paths are actually passed
      across interfaces that describe the type or class of hardware that is publishing
      the block I/O interface. This enumeration will allow for policy decisions
      in the Recovery PEIM, such as "Try to recover from legacy floppy first,
      LS-120 second, CD-ROM third." If there are multiple partitions abstracted
      by a given device type, they should be reported in ascending order; this
      order also applies to nested partitions, such as legacy MBR, where the
      outermost partitions would have precedence in the reporting order. The
      same logic applies to systems such as IDE that have precedence relationships
      like "Master/Slave" or "Primary/Secondary". The master device should be
      reported first, the slave second.

  @retval EFI_SUCCESS        Media information about the specified block device
                             was obtained successfully.
  @retval EFI_DEVICE_ERROR   Cannot get the media information due to a hardware
                             error.

**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetMediaInfo (
  IN  EFI_PEI_SERVICES               **PeiServices,
  IN  EFI_PEI_RECOVERY_BLOCK_IO_PPI  *This,
  IN  UINTN                          DeviceIndex,
  OUT EFI_PEI_BLOCK_IO_MEDIA         *MediaInfo
  )
{
  EFI_STATUS                     Status;
  UFS_PEIM_HC_PRIVATE_DATA       *Private;
  EFI_SCSI_SENSE_DATA            SenseData;
  UINT8                          SenseDataLength;
  EFI_SCSI_DISK_CAPACITY_DATA    Capacity;
  EFI_SCSI_DISK_CAPACITY_DATA16  Capacity16;
  UINTN                          DataLength;
  BOOLEAN                        NeedRetry;
  UINTN                          Lun;

  Private   = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS (This);
  NeedRetry = TRUE;

  if ((DeviceIndex == 0) || (DeviceIndex > UFS_PEIM_MAX_LUNS)) {
    return EFI_INVALID_PARAMETER;
  }

  Lun = DeviceIndex - 1;
  if ((Private->Luns.BitMask & (BIT0 << Lun)) == 0) {
    return EFI_ACCESS_DENIED;
  }

  ZeroMem (&SenseData, sizeof (SenseData));
  ZeroMem (&Capacity, sizeof (Capacity));
  ZeroMem (&Capacity16, sizeof (Capacity16));
  SenseDataLength = sizeof (SenseData);
  //
  // First test unit ready
  //
  do {
    Status = UfsPeimTestUnitReady (
               Private,
               Lun,
               &SenseData,
               &SenseDataLength
               );
    if (!EFI_ERROR (Status)) {
      break;
    }

    if (SenseDataLength == 0) {
      continue;
    }

    Status = UfsPeimParsingSenseKeys (&(Private->Media[Lun]), &SenseData, &NeedRetry);
    if (EFI_ERROR (Status)) {
      return EFI_DEVICE_ERROR;
    }
  } while (NeedRetry);

  DataLength      = sizeof (EFI_SCSI_DISK_CAPACITY_DATA);
  SenseDataLength = 0;
  Status          = UfsPeimReadCapacity (Private, Lun, &Capacity, (UINT32 *)&DataLength, NULL, &SenseDataLength);
  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }

  if ((Capacity.LastLba3 == 0xff) && (Capacity.LastLba2 == 0xff) &&
      (Capacity.LastLba1 == 0xff) && (Capacity.LastLba0 == 0xff))
  {
    DataLength      = sizeof (EFI_SCSI_DISK_CAPACITY_DATA16);
    SenseDataLength = 0;
    Status          = UfsPeimReadCapacity16 (Private, Lun, &Capacity16, (UINT32 *)&DataLength, NULL, &SenseDataLength);
    if (EFI_ERROR (Status)) {
      return EFI_DEVICE_ERROR;
    }

    Private->Media[Lun].LastBlock  = ((UINT32)Capacity16.LastLba3 << 24) | (Capacity16.LastLba2 << 16) | (Capacity16.LastLba1 << 8) | Capacity16.LastLba0;
    Private->Media[Lun].LastBlock |= LShiftU64 ((UINT64)Capacity16.LastLba7, 56) | LShiftU64 ((UINT64)Capacity16.LastLba6, 48) | LShiftU64 ((UINT64)Capacity16.LastLba5, 40) | LShiftU64 ((UINT64)Capacity16.LastLba4, 32);
    Private->Media[Lun].BlockSize  = (Capacity16.BlockSize3 << 24) | (Capacity16.BlockSize2 << 16) | (Capacity16.BlockSize1 << 8) | Capacity16.BlockSize0;
  } else {
    Private->Media[Lun].LastBlock = ((UINT32)Capacity.LastLba3 << 24) | (Capacity.LastLba2 << 16) | (Capacity.LastLba1 << 8) | Capacity.LastLba0;
    Private->Media[Lun].BlockSize = (Capacity.BlockSize3 << 24) | (Capacity.BlockSize2 << 16) | (Capacity.BlockSize1 << 8) | Capacity.BlockSize0;
  }

  MediaInfo->DeviceType   = UfsDevice;
  MediaInfo->MediaPresent = Private->Media[Lun].MediaPresent;
  MediaInfo->LastBlock    = (UINTN)Private->Media[Lun].LastBlock;
  MediaInfo->BlockSize    = Private->Media[Lun].BlockSize;

  return EFI_SUCCESS;
}

/**
  Reads the requested number of blocks from the specified block device.

  The function reads the requested number of blocks from the device. All the
  blocks are read, or an error is returned. If there is no media in the device,
  the function returns EFI_NO_MEDIA.

  @param[in]  PeiServices   General-purpose services that are available to
                            every PEIM.
  @param[in]  This          Indicates the EFI_PEI_RECOVERY_BLOCK_IO_PPI instance.
  @param[in]  DeviceIndex   Specifies the block device to which the function wants
                            to talk. Because the driver that implements Block I/O
                            PPIs will manage multiple block devices, PPIs that
                            want to talk to a single device must specify the device
                            index that was assigned during the enumeration process.
                            This index is a number from one to NumberBlockDevices.
  @param[in]  StartLBA      The starting logical block address (LBA) to read from
                            on the device
  @param[in]  BufferSize    The size of the Buffer in bytes. This number must be
                            a multiple of the intrinsic block size of the device.
  @param[out] Buffer        A pointer to the destination buffer for the data.
                            The caller is responsible for the ownership of the
                            buffer.

  @retval EFI_SUCCESS             The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR        The device reported an error while attempting
                                  to perform the read operation.
  @retval EFI_INVALID_PARAMETER   The read request contains LBAs that are not
                                  valid, or the buffer is not properly aligned.
  @retval EFI_NO_MEDIA            There is no media in the device.
  @retval EFI_BAD_BUFFER_SIZE     The BufferSize parameter is not a multiple of
                                  the intrinsic block size of the device.

**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimReadBlocks (
  IN  EFI_PEI_SERVICES               **PeiServices,
  IN  EFI_PEI_RECOVERY_BLOCK_IO_PPI  *This,
  IN  UINTN                          DeviceIndex,
  IN  EFI_PEI_LBA                    StartLBA,
  IN  UINTN                          BufferSize,
  OUT VOID                           *Buffer
  )
{
  EFI_STATUS                Status;
  UINTN                     BlockSize;
  UINTN                     NumberOfBlocks;
  UFS_PEIM_HC_PRIVATE_DATA  *Private;
  EFI_SCSI_SENSE_DATA       SenseData;
  UINT8                     SenseDataLength;
  BOOLEAN                   NeedRetry;
  UINTN                     Lun;

  Status    = EFI_SUCCESS;
  NeedRetry = TRUE;
  Private   = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS (This);

  ZeroMem (&SenseData, sizeof (SenseData));
  SenseDataLength = sizeof (SenseData);

  //
  // Check parameters
  //
  if (Buffer == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  if (BufferSize == 0) {
    return EFI_SUCCESS;
  }

  if ((DeviceIndex == 0) || (DeviceIndex > UFS_PEIM_MAX_LUNS)) {
    return EFI_INVALID_PARAMETER;
  }

  Lun = DeviceIndex - 1;
  if ((Private->Luns.BitMask & (BIT0 << Lun)) == 0) {
    return EFI_ACCESS_DENIED;
  }

  BlockSize = Private->Media[Lun].BlockSize;

  if (BufferSize % BlockSize != 0) {
    Status = EFI_BAD_BUFFER_SIZE;
  }

  if (StartLBA > Private->Media[Lun].LastBlock) {
    Status = EFI_INVALID_PARAMETER;
  }

  NumberOfBlocks = BufferSize / BlockSize;

  do {
    Status = UfsPeimTestUnitReady (
               Private,
               Lun,
               &SenseData,
               &SenseDataLength
               );
    if (!EFI_ERROR (Status)) {
      break;
    }

    if (SenseDataLength == 0) {
      continue;
    }

    Status = UfsPeimParsingSenseKeys (&(Private->Media[Lun]), &SenseData, &NeedRetry);
    if (EFI_ERROR (Status)) {
      return EFI_DEVICE_ERROR;
    }
  } while (NeedRetry);

  SenseDataLength = 0;
  if (Private->Media[Lun].LastBlock < 0xfffffffful) {
    Status = UfsPeimRead10 (
               Private,
               Lun,
               (UINT32)StartLBA,
               (UINT32)NumberOfBlocks,
               Buffer,
               (UINT32 *)&BufferSize,
               NULL,
               &SenseDataLength
               );
  } else {
    Status = UfsPeimRead16 (
               Private,
               Lun,
               (UINT32)StartLBA,
               (UINT32)NumberOfBlocks,
               Buffer,
               (UINT32 *)&BufferSize,
               NULL,
               &SenseDataLength
               );
  }

  return Status;
}

/**
  Gets the count of block I/O devices that one specific block driver detects.

  This function is used for getting the count of block I/O devices that one
  specific block driver detects.  To the PEI ATAPI driver, it returns the number
  of all the detected ATAPI devices it detects during the enumeration process.
  To the PEI legacy floppy driver, it returns the number of all the legacy
  devices it finds during its enumeration process. If no device is detected,
  then the function will return zero.

  @param[in]  PeiServices          General-purpose services that are available
                                   to every PEIM.
  @param[in]  This                 Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI
                                   instance.
  @param[out] NumberBlockDevices   The number of block I/O devices discovered.

  @retval     EFI_SUCCESS          The operation performed successfully.

**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetDeviceNo2 (
  IN  EFI_PEI_SERVICES                **PeiServices,
  IN  EFI_PEI_RECOVERY_BLOCK_IO2_PPI  *This,
  OUT UINTN                           *NumberBlockDevices
  )
{
  //
  // For Ufs device, it has up to 8 normal Luns plus some well-known Luns.
  // At PEI phase, we will only expose normal Luns to user.
  // For those disabled Lun, when user try to access it, the operation would fail.
  //
  *NumberBlockDevices = UFS_PEIM_MAX_LUNS;
  return EFI_SUCCESS;
}

/**
  Gets a block device's media information.

  This function will provide the caller with the specified block device's media
  information. If the media changes, calling this function will update the media
  information accordingly.

  @param[in]  PeiServices   General-purpose services that are available to every
                            PEIM
  @param[in]  This          Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
  @param[in]  DeviceIndex   Specifies the block device to which the function wants
                            to talk. Because the driver that implements Block I/O
                            PPIs will manage multiple block devices, the PPIs that
                            want to talk to a single device must specify the
                            device index that was assigned during the enumeration
                            process. This index is a number from one to
                            NumberBlockDevices.
  @param[out] MediaInfo     The media information of the specified block media.
                            The caller is responsible for the ownership of this
                            data structure.

  @par Note:
      The MediaInfo structure describes an enumeration of possible block device
      types.  This enumeration exists because no device paths are actually passed
      across interfaces that describe the type or class of hardware that is publishing
      the block I/O interface. This enumeration will allow for policy decisions
      in the Recovery PEIM, such as "Try to recover from legacy floppy first,
      LS-120 second, CD-ROM third." If there are multiple partitions abstracted
      by a given device type, they should be reported in ascending order; this
      order also applies to nested partitions, such as legacy MBR, where the
      outermost partitions would have precedence in the reporting order. The
      same logic applies to systems such as IDE that have precedence relationships
      like "Master/Slave" or "Primary/Secondary". The master device should be
      reported first, the slave second.

  @retval EFI_SUCCESS        Media information about the specified block device
                             was obtained successfully.
  @retval EFI_DEVICE_ERROR   Cannot get the media information due to a hardware
                             error.

**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimGetMediaInfo2 (
  IN  EFI_PEI_SERVICES                **PeiServices,
  IN  EFI_PEI_RECOVERY_BLOCK_IO2_PPI  *This,
  IN  UINTN                           DeviceIndex,
  OUT EFI_PEI_BLOCK_IO2_MEDIA         *MediaInfo
  )
{
  EFI_STATUS                Status;
  UFS_PEIM_HC_PRIVATE_DATA  *Private;
  EFI_PEI_BLOCK_IO_MEDIA    Media;
  UINTN                     Lun;

  Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);

  Status = UfsBlockIoPeimGetMediaInfo (
             PeiServices,
             &Private->BlkIoPpi,
             DeviceIndex,
             &Media
             );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Lun = DeviceIndex - 1;
  CopyMem (MediaInfo, &(Private->Media[Lun]), sizeof (EFI_PEI_BLOCK_IO2_MEDIA));
  return EFI_SUCCESS;
}

/**
  Reads the requested number of blocks from the specified block device.

  The function reads the requested number of blocks from the device. All the
  blocks are read, or an error is returned. If there is no media in the device,
  the function returns EFI_NO_MEDIA.

  @param[in]  PeiServices   General-purpose services that are available to
                            every PEIM.
  @param[in]  This          Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance.
  @param[in]  DeviceIndex   Specifies the block device to which the function wants
                            to talk. Because the driver that implements Block I/O
                            PPIs will manage multiple block devices, PPIs that
                            want to talk to a single device must specify the device
                            index that was assigned during the enumeration process.
                            This index is a number from one to NumberBlockDevices.
  @param[in]  StartLBA      The starting logical block address (LBA) to read from
                            on the device
  @param[in]  BufferSize    The size of the Buffer in bytes. This number must be
                            a multiple of the intrinsic block size of the device.
  @param[out] Buffer        A pointer to the destination buffer for the data.
                            The caller is responsible for the ownership of the
                            buffer.

  @retval EFI_SUCCESS             The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR        The device reported an error while attempting
                                  to perform the read operation.
  @retval EFI_INVALID_PARAMETER   The read request contains LBAs that are not
                                  valid, or the buffer is not properly aligned.
  @retval EFI_NO_MEDIA            There is no media in the device.
  @retval EFI_BAD_BUFFER_SIZE     The BufferSize parameter is not a multiple of
                                  the intrinsic block size of the device.

**/
EFI_STATUS
EFIAPI
UfsBlockIoPeimReadBlocks2 (
  IN  EFI_PEI_SERVICES                **PeiServices,
  IN  EFI_PEI_RECOVERY_BLOCK_IO2_PPI  *This,
  IN  UINTN                           DeviceIndex,
  IN  EFI_PEI_LBA                     StartLBA,
  IN  UINTN                           BufferSize,
  OUT VOID                            *Buffer
  )
{
  EFI_STATUS                Status;
  UFS_PEIM_HC_PRIVATE_DATA  *Private;

  Status  = EFI_SUCCESS;
  Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS2 (This);

  Status = UfsBlockIoPeimReadBlocks (
             PeiServices,
             &Private->BlkIoPpi,
             DeviceIndex,
             StartLBA,
             BufferSize,
             Buffer
             );
  return Status;
}

/**
  One notified function to cleanup the allocated DMA buffers at the end of PEI.

  @param[in]  PeiServices        Pointer to PEI Services Table.
  @param[in]  NotifyDescriptor   Pointer to the descriptor for the Notification
                                 event that caused this function to execute.
  @param[in]  Ppi                Pointer to the PPI data associated with this function.

  @retval     EFI_SUCCESS  The function completes successfully

**/
EFI_STATUS
EFIAPI
UfsEndOfPei (
  IN EFI_PEI_SERVICES           **PeiServices,
  IN EFI_PEI_NOTIFY_DESCRIPTOR  *NotifyDescriptor,
  IN VOID                       *Ppi
  )
{
  UFS_PEIM_HC_PRIVATE_DATA  *Private;

  Private = GET_UFS_PEIM_HC_PRIVATE_DATA_FROM_THIS_NOTIFY (NotifyDescriptor);

  if ((Private->Pool != NULL) && (Private->Pool->Head != NULL)) {
    UfsPeimFreeMemPool (Private->Pool);
  }

  if (Private->UtpTmrlBase != NULL) {
    IoMmuFreeBuffer (
      EFI_SIZE_TO_PAGES (Private->Nutmrs * sizeof (UTP_TMRD)),
      Private->UtpTmrlBase,
      Private->TmrlMapping
      );
  }

  if (Private->UtpTrlBase != NULL) {
    IoMmuFreeBuffer (
      EFI_SIZE_TO_PAGES (Private->Nutrs * sizeof (UTP_TRD)),
      Private->UtpTrlBase,
      Private->TrlMapping
      );
  }

  UfsControllerStop (Private);

  return EFI_SUCCESS;
}

/**
  The user code starts with this function.

  @param  FileHandle             Handle of the file being invoked.
  @param  PeiServices            Describes the list of possible PEI Services.

  @retval EFI_SUCCESS            The driver is successfully initialized.
  @retval Others                 Can't initialize the driver.

**/
EFI_STATUS
EFIAPI
InitializeUfsBlockIoPeim (
  IN EFI_PEI_FILE_HANDLE     FileHandle,
  IN CONST EFI_PEI_SERVICES  **PeiServices
  )
{
  EFI_STATUS                     Status;
  UFS_PEIM_HC_PRIVATE_DATA       *Private;
  EDKII_UFS_HOST_CONTROLLER_PPI  *UfsHcPpi;
  UINT32                         Index;
  UINTN                          MmioBase;
  UINT8                          Controller;
  UFS_UNIT_DESC                  UnitDescriptor;

  //
  // Shadow this PEIM to run from memory
  //
  if (!EFI_ERROR (PeiServicesRegisterForShadow (FileHandle))) {
    return EFI_SUCCESS;
  }

  //
  // locate ufs host controller PPI
  //
  Status = PeiServicesLocatePpi (
             &gEdkiiPeiUfsHostControllerPpiGuid,
             0,
             NULL,
             (VOID **)&UfsHcPpi
             );
  if (EFI_ERROR (Status)) {
    return EFI_DEVICE_ERROR;
  }

  IoMmuInit ();

  Controller = 0;
  MmioBase   = 0;
  while (TRUE) {
    Status = UfsHcPpi->GetUfsHcMmioBar (UfsHcPpi, Controller, &MmioBase);
    //
    // When status is error, meant no controller is found
    //
    if (EFI_ERROR (Status)) {
      break;
    }

    Private = AllocateCopyPool (sizeof (UFS_PEIM_HC_PRIVATE_DATA), &gUfsHcPeimTemplate);
    if (Private == NULL) {
      Status = EFI_OUT_OF_RESOURCES;
      break;
    }

    Private->BlkIoPpiList.Ppi  = &Private->BlkIoPpi;
    Private->BlkIo2PpiList.Ppi = &Private->BlkIo2Ppi;
    Private->UfsHcBase         = MmioBase;

    //
    // Initialize the memory pool which will be used in all transactions.
    //
    Status = UfsPeimInitMemPool (Private);
    if (EFI_ERROR (Status)) {
      Status = EFI_OUT_OF_RESOURCES;
      break;
    }

    //
    // Initialize UFS Host Controller H/W.
    //
    Status = UfsControllerInit (Private);
    if (EFI_ERROR (Status)) {
      DEBUG ((DEBUG_ERROR, "UfsDevicePei: Host Controller Initialization Error, Status = %r\n", Status));
      Controller++;
      continue;
    }

    //
    // UFS 2.0 spec Section 13.1.3.3:
    // At the end of the UFS Interconnect Layer initialization on both host and device side,
    // the host shall send a NOP OUT UPIU to verify that the device UTP Layer is ready.
    //
    Status = UfsExecNopCmds (Private);
    if (EFI_ERROR (Status)) {
      DEBUG ((DEBUG_ERROR, "Ufs Sending NOP IN command Error, Status = %r\n", Status));
      Controller++;
      continue;
    }

    //
    // The host enables the device initialization completion by setting fDeviceInit flag.
    //
    Status = UfsSetFlag (Private, UfsFlagDevInit);
    if (EFI_ERROR (Status)) {
      DEBUG ((DEBUG_ERROR, "Ufs Set fDeviceInit Flag Error, Status = %r\n", Status));
      Controller++;
      continue;
    }

    //
    // Check if 8 common luns are active and set corresponding bit mask.
    //
    for (Index = 0; Index < UFS_PEIM_MAX_LUNS; Index++) {
      Status = UfsRwDeviceDesc (Private, TRUE, UfsUnitDesc, (UINT8)Index, 0, &UnitDescriptor, sizeof (UFS_UNIT_DESC));
      if (EFI_ERROR (Status)) {
        DEBUG ((DEBUG_ERROR, "Fail to read UFS Unit Descriptor, Index = %X, Status = %r\n", Index, Status));
        continue;
      }

      if (UnitDescriptor.LunEn == 0x1) {
        DEBUG ((DEBUG_INFO, "Ufs %d Lun %d is enabled\n", Controller, Index));
        Private->Luns.BitMask |= (BIT0 << Index);
      }
    }

    PeiServicesInstallPpi (&Private->BlkIoPpiList);
    PeiServicesNotifyPpi (&Private->EndOfPeiNotifyList);
    Controller++;
  }

  return EFI_SUCCESS;
}