Edk2 Continuous Integration

Basic Status

For more detailed status look at the test results of the latest CI run on the repo readme.

Background

This Continuous integration and testing infrastructure leverages the TianoCore EDKII Tools PIP modules: library and extensions (with repos located here and here).

The primary execution flows can be found in the .azurepipelines/Windows-VS2019.yml and .azurepipelines/Ubuntu-GCC5.yml files. These YAML files are consumed by the Azure Dev Ops Build Pipeline and dictate what server resources should be used, how they should be configured, and what processes should be run on them. An overview of this schema can be found here.

Inspection of these files reveals the EDKII Tools commands that make up the primary processes for the CI build: ‘stuart_setup’, ‘stuart_update’, and ‘stuart_ci_build’. These commands come from the EDKII Tools PIP modules and are configured as described below. More documentation on the tools can be found here and here.

Configuration

Configuration of the CI process consists of (in order of precedence):

• command-line arguments passed in via the Pipeline YAML
• a per-package configuration file (e.g. <package-name>.ci.yaml) that is detected by the CI system in EDKII Tools.
• a global configuration Python module (e.g. CISetting.py) passed in via the command-line

The global configuration file is described in this readme from the EDKII Tools documentation. This configuration is written as a Python module so that decisions can be made dynamically based on command line parameters and codebase state.

The per-package configuration file can override most settings in the global configuration file, but is not dynamic. This file can be used to skip or customize tests that may be incompatible with a specific package. Each test generally requires per package configuration which comes from this file.

Running CI locally

The EDKII Tools environment (and by extension the ci) is designed to support easily and consistently running locally and in a cloud ci environment. To do that a few steps should be followed. Details of EDKII Tools can be found in the docs folder here

Prerequisets

1. A supported toolchain (others might work but this is what is tested and validated)
   • Windows 10:
     • VS 2017 or VS 2019
     • Windows SDK (for rc)
     • Windows WDK (for capsules)
   • Ubuntu 18.04 or Fedora
     • GCC5
   • Easy to add more but this is the current state
2. Python 3.7.x or newer on path
3. git on path
4. Recommended to setup and activate a python virtual environment
5. Install the requirements pip install --upgrade pip-requirements.txt

Running CI

1. clone your edk2 repo
2. Activate your python virtual environment in cmd window
3. Get code dependencies (done only when submodules change)
   • stuart_setup -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>
4. Update other dependencies (done more often)
   • stuart_update -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>
5. Run CI build (--help will give you options)
   • stuart_ci_build -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>
   • -p <pkg1,pkg2,pkg3> : To build only certain packages use a CSV list
   • -a <arch1,arch2,arch3>: To run only certain architectures use a CSV list
   • -t <target1,target2>: To run only tests related to certain targets use a CSV list
   • By default all tests are opted in. Then given a package.ci.yaml file those tests can be configured for a package. Finally setting the check to the value skip will skip that plugin. Examples:
     • CompilerPlugin=skip skip the build test
     • GuidCheck=skip skip the Guid check
     • SpellCheck=skip skip the spell checker
     • etc
6. Detailed reports and logs per package are captured in the Build directory

Current PyTool Test Capabilities

All CI tests are instances of EDKII Tools plugins. Documentation on the plugin system can be found here and here. Upon invocation, each plugin will be passed the path to the current package under test and a dictionary containing its targeted configuration, as assembled from the command line, per-package configuration, and global configuration.

Note: CI plugins are considered unique from build plugins and helper plugins, even though some CI plugins may execute steps of a build.

In the example, these plugins live alongside the code under test (in the .pytool/Plugin directory), but may be moved to the ‘edk2-test’ repo if that location makes more sense for the community.

Module Inclusion Test - DscCompleteCheck

This scans all INF files from a package and confirms they are listed in the package level DSC file. The test considers it an error if any INF does not appear in the Components section of the package-level DSC (indicating that it would not be built if the package were built). This is critical because much of the CI infrastructure assumes that all modules will be listed in the DSC and compiled.

This test will ignore INFs in the following cases:

1. When MODULE_TYPE = HOST_APPLICATION
2. When a Library instance only supports the HOST_APPLICATION environment

Host Module Inclusion Test - HostUnitTestDscCompleteCheck

This test scans all INF files from a package for those related to host based unit tests and confirms they are listed in the unit test DSC file for the package. The test considers it an error if any INF meeting the requirements does not appear in the Components section of the unit test DSC. This is critical because much of the CI infrastructure assumes that modules will be listed in the DSC and compiled.

This test will only require INFs in the following cases:

1. When MODULE_TYPE = HOST_APPLICATION
2. When a Library instance explicitly supports the HOST_APPLICATION environment

Code Compilation Test - CompilerPlugin

Once the Module Inclusion Test has verified that all modules would be built if all package-level DSCs were built, the Code Compilation Test simply runs through and builds every package-level DSC on every toolchain and for every architecture that is supported. Any module that fails to build is considered an error.

Host Unit Test Compilation and Run Test - HostUnitTestCompilerPlugin

A test that compiles the dsc for host based unit test apps. On Windows this will also enable a build plugin to execute that will run the unit tests and verify the results.

These tools will be invoked on any CI pass that includes the NOOPT target. In order for these tools to do their job, the package and tests must be configured in a particular way...

Including Host-Based Tests in the Package YAML

For example, looking at the MdeModulePkg.ci.yaml config file, there are two config options that control HostBased test behavior:

    ## options defined .pytool/Plugin/HostUnitTestCompilerPlugin
    "HostUnitTestCompilerPlugin": {
        "DscPath": "Test/MdeModulePkgHostTest.dsc"
    },

This option tell the test builder to run. The test builder needs to know which modules in this package are host-based tests, so that DSC path is provided.

Configuring the HostBased DSC

The HostBased DSC for MdeModulePkg is located at MdeModulePkg/Test/MdeModulePkgHostTest.dsc.

To add automated host-based unit test building to a new package, create a similar DSC. The new DSC should make sure to have the NOOPT BUILD_TARGET and should include the line:

!include UnitTestFrameworkPkg/UnitTestFrameworkPkgHost.dsc.inc

All of the modules that are included in the Components section of this DSC should be of type HOST_APPLICATION.

GUID Uniqueness Test - GuidCheck

This test works on the collection of all packages rather than an individual package. It looks at all FILE_GUIDs and GUIDs declared in DEC files and ensures that they are unique for the codebase. This prevents, for example, accidental duplication of GUIDs when using an existing INF as a template for a new module.

Cross-Package Dependency Test - DependencyCheck

This test compares the list of all packages used in INFs files for a given package against a list of “allowed dependencies” in plugin configuration for that package. Any module that depends on a disallowed package will cause a test failure.

Library Declaration Test - LibraryClassCheck

This test scans at all library header files found in the Library folders in all of the package's declared include directories and ensures that all files have a matching LibraryClass declaration in the DEC file for the package. Any missing declarations will cause a failure.

Invalid Character Test - CharEncodingCheck

This test scans all files in a package to make sure that there are no invalid Unicode characters that may cause build errors in some character sets/localizations.

Spell Checking - cspell

This test runs a spell checker on all files within the package. This is done using the NodeJs cspell tool. For details check .pytool/Plugin/SpellCheck. For this plugin to run during ci you must install nodejs and cspell and have both available to the command line when running your CI.

Install

• Install nodejs from https://nodejs.org/en/

• Install cspell

  1. Open cmd prompt with access to node and npm
  2. Run npm install -g cspell

  More cspell info: https://github.com/streetsidesoftware/cspell

License Checking - LicenseCheck

Scans all new added files in a package to make sure code is contributed under BSD-2-Clause-Patent.

Ecc tool - EccCheck

Run the Ecc tool on the package. The Ecc tool is available in the BaseTools package. It checks that the code complies to the EDKII coding standard.

PyTool Scopes

Scopes are how the PyTool ext_dep, path_env, and plugins are activated. Meaning that if an invocable process has a scope active then those ext_dep and path_env will be active. To allow easy integration of PyTools capabilities there are a few standard scopes.

Future investments

• PatchCheck tests as plugins
• MacOS/xcode support
• Clang/LLVM support
• Visual Studio AARCH64 and ARM support
• BaseTools C tools CI/PR and binary release process
• BaseTools Python tools CI/PR process
• Extensible private/closed source platform reporting
• UEFI SCTs
• Other automation